Google Pixel DISASSEMBLE. PennEngineering
|
|
- Alyson Oliver
- 5 years ago
- Views:
Transcription
1 Google Pixel DISASSEMBLE June 4th, 2018 Allen Wang PennEngineering 1
2 Google Pixel Teardown 2
3 Details & Findings Pictures and Description of the Google Pixel and our disassembly process. 3
4 Take out SIM card tray Step 1: Power off the cellphone and take out the SIM card tray Remove the Sim card tray from the phone using the included Eject pin. One rubber gasket used in here( Circled in Pink) for water resistance. In this step, no mechanical fasteners were found. 4
5 Take off the screen Step 2: Take off the screen of cellphone There are no screws used on the outside of the phone. The screen is fixed to the cellphone body with adhesive. All of this is designed for water resistance. Between the screen and phone body, one flexible cable fixed with two screws. These two screws thread into inserts in Blue on Slide #10 Metal-press-plate Thickness: 0.3mm Stainless Quantity:1 Thread Size: M1.4*0.3 Recess: T-5 Head diameter: ø mm Head thickness: 0.52mm Carbon steel + Bright Zinc Quantity: 2 Overall Length: 4.02mm Nylon locking patch 5
6 Disassemble mid-frame Step 3: Disassemble the mid-frame Total of twelve screws used here to assemble the mid-frame with chassis of cellphone. One is Torx (Circled in Blue) + eleven Philips screws (Circled in Pink), Thread Size: M1.4*0.3 Recess: T-5 Head diameter: ø mm Head thickness: 0.52 mm Carbon steel + Bright Zinc Quantity: 1 Overall Length: 4.02 mm Nylon locking patch This screw threads into insert circled in Green on Slide #10 This screw is same as shown on Slide #5 Thread Size: M1.4*0.3 Recess: PH 00 Head diameter:ø mm Head thickness: 0.33 mm Carbon steel + Black Zinc Quantity: 11 Overall Length: 3.75 mm Nylon locking patch These screws thread into inserts circled in Pink on Slide #10 6
7 Take off mid-frame Step 4: Take off the mid-frame In addition to the twelve screws (mentioned on Slide #6), there is a flexible cable(circled in Yellow) connect to the chassis In this step, no mechanical fasteners were found. 7
8 Disassemble main board Step 5: Disassemble the main board (To be cont d) After removing the mid-frame, another two screws (Circled in Pink) are found which are used to attach the main board to the chassis. Four flexible cable(circled in Blue) connected on the main board. Thread Size: M1.4*0.3 Recess: PH 00 Head diameter:ø2.9 mm Head thickness: 0.43 mm Carbon steel + Bright Zinc Quantity: 2 Overall Length: 2.33 mm Nylon locking patch These two screws thread into inserts circled in Yellow on Slide #10 Disassemble the cable connectors. 8
9 Take off main board Step 5: Disassemble the main board (Cont d) Remove one cable connector (Circled in Pink) and two radio frequency lines (Circled in Blue) on the bottom side of main board, then the main board can be taken off the chassis. Two radio frequency lines Flexible cable connector for backmounted fingerprint scanner. 9
10 Remove insert at top of chassis Step 6: Remove insert at top of chassis After removing the main board, eight inserts are found in chassis. These inserts are pressed in chassis and made of Aluminum. Thread Size: M1.4*0.3 Outside diameter: ø2.85mm Carbon steel + Plating Quantity: 9 Overall Length: 2mm Inserts circled in Blue: mate with screws on Slide #5, Inserts circled in Green: mate with Torx screws on Slide #6, Inserts circled in Pink: mate with Philips screws on Slide #6, Inserts circled in Yellow: mate with screws on Slide #8, 10
11 Take off cameras Step 7 Take off cameras Disassemble two cable connectors and take off the front-facing camera(circled in Blue) and rearfacing camera(circled in Pink). In this step, no mechanical fastener were found. Back view for rearfacing camera 11
12 Take off bottom PCB board Step8 Take off PCB board at bottom Take off the right part of PCB board at bottom. (the screws used to fixed is unscrewed on Slide #5) In this step, no mechanical fasteners were found. Two plastic pins (Circled in Pink) At the bottom side, adhesive is used. Pin holes for location. 12
13 Take off USB port Step 9: Remove USB port Most screws are disassembled on Slide #5, and one more screw (Circled in Pink) used in here to fix the USB port on chassis. Thread Size: M1.4*0.3 Recess: PH 00 Head diameter ø2.9 mm Head thickness: 0.43 mm Carbon steel + Bright Zinc Quantity: 1 Overall Length: 2.33 mm Nylon locking patch Adhesive is used on the bottom side. This screw is same as shown on Slide #8 Inserts for this screw threads in shown on Slide #
14 Remove inserts at bottom of chassis Step 10 Remove inserts at bottom of chassis After Removing the PCB boards from the bottom, eight carbon steel inserts and one brass insert(circled in Yellow) are removed. The brass insert is pressed in plastic which is molded onto the chassis and carbon inserts are pressed in Aluminum chassis. Thread Size: M1.4*0.3 Outside diameter: ø2.85mm Carbon steel + Plating Quantity: 7 Overall Length: 1.8mm These inserts are same as shown on Slide #10 The insert circled in Green: match with screws shown on Slide #13. Other inserts : match with Philips screws shown on Slide #6. Thread Size: M1.4*0.3 Outside diameter. Ø2.2 mm Brass Quantity: 1 Overall Length:1.8mm 14
15 Step 11: Disassembly is done Google Pixel Teardown 15
16 Fastener Summary 16
17 Fasteners Summary Total 18 pieces fasteners & hardware used in the Google Pixel rigidity and makes the machines is easy to take apart with everything organized in such a way. All of the fasteners in this Google Pixel are tabulated as the following: Item Fastener & Hardware Qty. Driver Overall Length Finish Material Slide No. 1 Torx Screws_M1.4x0.3 3 T Bright Zinc Carbon steel #5, #6 2 3 Philips Screws_M1.4x0.3 Philips Screws_M1.4x PH Bright Zinc Carbon steel #6 3 PH Bright Zinc Carbon steel #8, #13 4 Inserts 16 / 1.8 Plating Carbon steel #10, #14 5 Brass Inserts 1 / 1.8 / Brass #14 6 Metal-press-plate 1 / / / Stainless #5 17
18 Fasteners Summary Thread Size: M1.4*0.3 Recess: T-5 Round head ø mm Head thickness: 0.52 mm Carbon steel + Bright Zinc Quantity: 3 Overall Length: 4.02 mm Nylon locking patch Reference slide #5, #6 Metal-press-plate Thick: 0.3mm Stainless Quantity:1 Reference slide #5 Thread Size: M1.4*0.3 Recess: PH 00 Round head ø mm Head thickness: 0.33 mm Carbon steel + Black Zinc Quantity: 11 Overall Length: 3.75 mm Nylon locking patch Reference slide #6 Thread Size: M1.4*0.3 Recess: PH 00 Round head ø2.9 mm Head thickness: 0.43 mm Carbon steel + Bright Zinc Quantity: 3 Overall Length: 2.33 mm Nylon locking patch Reference slide #8, #
19 Fasteners Summary Thread Size: M1.4*0.3 Outside diameter: ø2.85mm Carbon steel + Plating Quantity: 7 Overall Length: 1.8mm Reference slide #10, #14 Thread Size: M1.4*0.3 O.D. Ø2.2 mm Brass Quantity: 1 Overall Length:1.8mm Reference slide #
20 Alternate Solutions PennEngineering recommendations of alternate hardware and cost savings opportunities. 20
21 Alternate Solutions Micro Screws alternate solution: PennEngineering has license with Microstix, Torx and Torx Plus driver and self-tapping thread patent such as TAPTITE, FASTITE, REMFORM and REMFORM F with different design solutions. All of the screws used in this machine can be directly replaced with PEM relevant screws. Refer to slides #5, #6, #8, #13, 21
22 Alternate Solutions Rotary install SO alternate solution: In this situation rotary installed standoffs may be used instead of carbon steel inserts. This removes the need to cast a part with extra height for mounting holes for insert installation. It also reduces the raw material needed for the chassis and simplifies the process for chassis production. Refer to slides #10, #14 Rotary Installation Replace weld standoffs or cold press-in inserts with rotary installed standoffs. Uses torque and reduced axial force to prevent damage to cosmetic surfaces. Micro fasteners install into material as thin as 0.5mm. No protrusion above the top surface of the panel. Requires a blind milled hole. 22
23 Alternate Solutions SI inserts alternate solution: PennEngineering can provide different sized brass and aluminum inserts to meet the application requirement. The threaded inserts found in this device can be replaced with MSIB inserts. micropem aluminum SI series inserts provide an effective method for reducing product weight and in a variety of designs and sizes are recommended to replace the brass inserts. Refer to slides #
24 Alternate Solutions Inserts for casting alternate solution: PennEngineering can provide different sized inserts for casting to meet the application requirement. PEM does have a previous successful application case and product for this type of insert. Refer to slides #10, #14, 24
25 Alternate Solutions TackSert alternate solution : All of the screws threaded into brass inserts in this machine can be totally replaced with micropem TackSert. The TackSert pins can permanently install into plastic materials and eliminate cost of brass inserts at the same time. Installation will be faster by changing to press-in over turn-in. The TackSert can eliminate the need for loose hardware, while providing a permanent solution. Refer to slides #14, 25
26 Conclusions and Summary The Google Pixel is an intelligently designed device. The plastic part is mold on the Aluminum alloy chassis and total 16 pieces fasteners are used. Lots of parts are connected with adhesive. PennEngineering offered micropem FASTENERS can be fastening solutions to directly and/or indirectly replace the joining used in this device within our current manufacturing facilities. In addition to direct replacement, perhaps some manufacturing and material substitution for functional and cost improvement, some alternate fastening suggestions are presented for specific situations. All screws can be quoted as direct PEM replacements. All screws and brass inserts can be quoted as direct PEM TackSert. The brass insert can be quoted as direct PEM brass insert replacements or inserts made from Aluminum for weight saving. All carbon inserts pressed in casting can be quoted as direct PEM nuts for casting. All carbon inserts pressed in casting can be replaced with rotary installed standoffs for faster installation time and reduce the process cost of chassis. Additional savings could be realized by using micropem FASTENERS being fed, positioned and installed automatically in an installation system to install fittings into the components in this machine. 26
Nokia 6 Cellphone. PennEngineering. April 7th, 2017 Xiaoming Chen. 1
Nokia 6 Cellphone April 7th, 2017 Xiaoming Chen PennEngineering 1 Overview Nokia 6 has a 5.5-inch FHD IPS display with a polarizer film covered with 2.5D Gorilla Glass for protection. The smartphone comes
More informationLe Max2. PennEngineering. September 26 th 2016 by Larry Zhang. 1
September 26 th 2016 by Larry Zhang PennEngineering 1 Overview 5.7-inch Super AMOLED display with 2560 1440 resolution (Quad HD /2K) 2.21-megapixel rear camera with dual pixel autofocus, 4K video capture;
More informationSamsung Gear VR. PennEngineering. April 26, 2016 by XiaoMing Chen & Larry Zhang. 1
Samsung Gear VR April 26, 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 Samsung Gear VR Overview 2 Samsung Gear VR Details & Findings Pictures and Description of the Samsung Gear VR and the Disassembly
More informationSamsung Galaxy S7. PennEngineering. April 2016 by Larry Zhang & Xiaoming Chen. 25th. 1
25th April 2016 by Larry Zhang & Xiaoming Chen PennEngineering 1 Overview 2 Details & Findings Pictures and Description of the Samsung Galaxy S7 and the Disassembly Process. 3 Teardown Step1: Remove the
More informationBrydgeAir Keyboard for ipad Air
BrydgeAir Keyboard for ipad Air May 3 rd. 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 BrydgeAir Keyboard for ipad Air Overview 2 BrydgeAir Keyboard for ipad Air Details & Findings Pictures and
More informationApple iphone 8. PennEngineering
Apple iphone 8 March 2018 by Jon Brunk PennEngineering www.pemnet.com 1 Apple iphone 8 www.pemnet.com 2 Details & Findings Pictures and Description of the iphone 8 and our disassembly process. www.pemnet.com
More informationMI HDTV Interactive Set - Top Box. PennEngineering. 21 st April, 2015 by Chen Xiaoming & Zhang Larry. 1
MI HDTV Interactive Set - Top Box 21 st April, 2015 by Chen Xiaoming & Zhang Larry PennEngineering www.pemnet.com 1 MI HDTV Interactive Set - Top Box www.pemnet.com 2 MI HDTV Interactive Set - Top Box
More informationLenovo IdeaPad U310 NoteBook
Lenovo IdeaPad U310 NoteBook 2012-09-12 Lenovo IdeaPad U310-Overview Lenovo IdeaPad U310-Overview Top View Left Side View Comments: Bottom View Both the top case and bottom case are aluminum alloy material
More informationIdeal for today s compact electronics BULLETIN MPF
Ideal for today s compact electronics BULLETIN MPF 13 R e v 513 IDEAL FOR TODAY S COMPACT ELECTRONICS Laptops Notebooks/Ultrabook Devices Tablets/eReaders Cell/Smart Phones Gaming/Hand Held Devices Ultrabook
More informationRibcage Installation. Part 2 - Assembly. Back-Bone V1.06
Ribcage Installation Part 2 - Assembly Back-Bone V1.06 Contents Section 1 Before You Get Started... 2 Included With Your Kit:... 2 Figure: A... 3 CAUTION!... 4 Note:... 4 Tools Required... 5 Section 2:
More informationPEM VARIMOUNT BONDING FASTENERS
Bulletin VM-917 PEM VariMount bonding fasteners are assemblies comprised of standard PEM fasteners mounted permanently into base plates. VM PEM VARIMOUNT BONDING FASTENERS The PEM VariMount fastening system
More informationBulletin TK-518. For attachment of thin panels to plastics, common casting materials and other similar materials. NEW!
Bulletin TK-518 For attachment of thin panels to plastics, common casting materials and other similar materials. NEW! TK TACKSERT PINS For attachment of thin sheets to plastics, common casting materials
More informationE-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD USA
E-Z LOK Products are available from MARYLAND METRICS P.O. Box 261 MD 21117 USA phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationKEYHOLE STANDOFFS AND FASTENERS BULLETIN
BULLETIN SK 616 PEM KEYHOLE Standoffs ( SKC ) and sheet joining fasteners ( SKC-F ) are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply
More informationKEYHOLE STANDOFFS AND FASTENERS BULLETIN
BULLETIN SK 814 PEM KEYHOLE Standoffs ( SKC ) and sheet joining fasteners ( SKC-F ) are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationHandout Activity: HA043
Handout Activity: HA043 Student/Intern information: Name Date Class Summary There are many different fasteners used in automotive applications, including screws, bolts, studs & nuts. Washers & chemical
More informationArducopter 3DR-B Hardware
Arducopter 3DR-B Thank you for purchasing an Arducopter 3DR kit. The Arducopter 3DR is a stable and supported quadrotor frame in the ongoing development of the Arducopter code on DIYDrones. It features
More informationFasteners. For Use in. Stainless. Steel Sheets. Revised 108
Fasteners For Use in Stainless Steel Sheets Revised 108 FASTENERS FOR USE IN STAINLESS STEEL SHEETS One of the very basics of self-clinching is that the fastener must be harder than the host sheet. Only
More informationSurface. Mount. Fasteners. Revised 608
Surface Mount Fasteners Revised 608 SURFACE MOUNT FASTENERS PEM ReelFast surface mount nuts, spacers, panel fasteners and R ANGLE fasteners are mounted to printed circuit boards in the same manner as other
More informationF A S T E N E R S F O R U S E W I T H P C B O A R D S
F A S T N R S F O R U S W I T H P B OA R S FASTNRS FOR US WITH P BOARS an satisfy component-to-board, board-to-board, and boardto-chassis production fastening needs using less attachment hardware. BROAHING
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationLocks and Catches Catches and Furniture Bolts
Magnetic catch with low noise closure Material: Plastic housing Version: with closed surface and internal magnet, magnets no viewable : Press fixing Pull 0. kg, for drilling hole Ø8 mm white 26.01.701
More informationBOB SLAY (assembly instructions)
BOB SLAY (assembly instructions) Items included: 7 x Acrylic cutouts labeled A-G 1 x Acrylic IO Panel 1 x Acrylic locking plate of PCI cards 2 x Acrylic 5.25 spacers 2 x momentary switches (power/reset)
More information(2) 25mm x 20mm x 5mm Adhesive Backed Foam Pads. 100mm x 50mm x 1.0mm Adhesive Backed Foam. (2) Spacer Plates. Passenger/Right Side Frame Mounting
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Frame Mounting 16 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting 8 12mm Hex Nuts 1 Driver/Left Side Top Support 2 10-1.50mm
More informationSurface. Mount. Fasteners. Revised 908
Surface Mount Fasteners Revised 98 SURFACE MOUNT FASTENERS PEM ReelFast surface mount nuts, spacers, panel fasteners and R ANGLE fasteners are mounted to printed circuit boards in the same manner as other
More information3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
More informationS T U D S & Revised 406
C O N C E A L E D - H E A D S E L F - C L I N C H I N G S T U D S & S TA N D O F F S Revised 406 PEM CONCEALED-HEAD STUDS* AND STANDOFFS These studs and standoffs ensure permanent mounting in metal sheets
More informationConnector Technology, Shelf Supports Connection Fittings
MODULAR Connection fitting for recess mounting Finish: Burnished : For recess mounting The plate should allways be installed so that the supporting plate butts against the end of the recess. For rapid
More informationFastening Technology. The Strong
100 The Strong Fastening Technology A few years ago connecting without drilling, milling or welding was almost unthinkable. It is obvious that if you can eliminate machining or welding from the process
More informationAX1001. Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS
AX1001 Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS EXPLODED DIAGRAM 83 84 84 85/86 87 87 88 89 90 91 62 64 64 64 64 64 64 65 65 65 65 66 66 65 66 66 65 63 63 66 67 68 55 66 66 70
More informationINSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
More informationSPOTFAST FASTENERS BULLETIN
BULLETIN SF 1115 Allows permanent joining in metal to metal and metal to PCB/plastic panels Alternative to riveting and spot welding. No special installation equipment required. Flush or sub-flush on both
More informationBe sure any accessory used will fit with the soft upper doors before installing. Not all accessories will be compatible.
Company Name: Spike Power Sports Vehicle Name: Polaris General 2P Product Description: Soft Upper Doors Part Number: 58-1600 Revision: R01 09/19/2018 Contents: 655 Elm Ridge Ave, Canal Fulton OH, 44614
More informationRMD3000 DPO3000 Series Rackmount Kit
Instructions RMD3000 DPO3000 Series Rackmount Kit 071-2424-00 Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless you
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationHomecrest Style Sling Standard Chair Installation Instructions
1 Homecrest Style Sling Standard Chair Installation Instructions Tools Required Sheppard Hook Spreader Tool Rubber Mallet 7/16 Ratchet/Wrench OPTIONAL NEW HARDWARE PER CHAIR Although your existing Homecrest
More informationVIEWPOINT ALUMINUM RUNNING BOARD TOYOTA RAV4
PARTS LIST: VIEWPOINT ALUMINUM RUNNING BOARD 1 Driver/Left Running Board 4 10-1.5mm x 50mm T-Bolt 1 Passenger/Right Running Board 12 10mm Plastic Retainers 1 Driver/Left Bracket 2 10-1.50mm x 40mm Hex
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationStaples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Item # Size Finish Material Case Qty.
Edge Protector Staples to bottom of cabinets for protection in shop Size: 1-1/2'' L x 5/8'' x 9/16'' Natural finish Plastic Size Finish Material Case PX91000N* 1-[½]"L x [⅝]" x [ 9 / 16]" Natural Plastic
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationUNI DIN UNI DIN 7982.
Tapping screws with cylindrical head cross UNI 6954. DIN 7981. Material 15800***** GALVANIZED STEEL WHITE 16900***** GALVANIZED STEEL BLACK 15700***** STAINLESS STEEL A-AISI 304 157A4***** STAINLESS STEEL
More informationFASTENERS FOR USE WITH PC BOARDS BULLETIN
FASTNRS FOR US WITH P BOARS BULLTIN K 107 R e v. 509A FASTNRS FOR US WITH P BOARS an satisfy component-to-board, board-to-board, and board-to-chassis production fastening needs using less attachment hardware.
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROTRAXX OVAL STEP BAR APPLICATION: 2009-2017 Dodge Ram 1500 Crew/Quad Cab 2010-2017 Dodge Ram 2500/500 Crew Cab PART NUMBER: 21-550, 21-555, 21-50, 21-55 AUTOMOTIVE PRODUCTS,
More informationBulletin SSA-516 REV 817. PEM brand SNAP-TOP standoffs are designed for permanent installation into metal panels or PC Boards SSA SNAP-TOP STANDOFFS
Bulletin SSA-516 REV 817 PEM brand SNAP-TOP standoffs are designed for permanent installation into metal panels or PC Boards SSA SNAP-TOP STANDOFFS PEM SNAP-TOP Standoffs are designed for permanent installation
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationUSSC LLC 4 ONE LLC FIELD MODIFICATION INSTRUCTIONS
1 OF 17 A 1. PURPOSE: Instructions for in field replacement of 9004 mechanical suspension top pan 2. SCOPE: 9004 mechanical suspension with legacy two point LX back frame and current LX back frame 3. PROCEDURE:
More informationThe edge you ve been waiting for
R I G H T A N G L E C L I N C H F A S T E N E R S The edge you ve been waiting for Revised 606 PEM R ANGLE RIGHT ANGLE CLINCH FASTENER TYPES RAA AND RAS Self-clinching PEM R ANGLE fasteners provide you
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationCONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
More informationBumper Sign INSTALLATION INSTRUCTIONS
Bumper Sign INSTALLATION INSTRUCTIONS BUMPERSIGN TOOL CHECKLIST SDS MAX Rotary Hammer Drill Marker/Pencil SDS MAX 1 Carbide Drill Bit Tape Measure Torque Wrench with ½ Drive Power Source Vacuum ½ Drive
More informationBluetooth DRO Installation for Bench Mills
The premier source of tooling, parts, and accessories for bench top machinists. Bluetooth DRO Installation for Bench Mills These instructions describe how to install the following products: 5494: Digital
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More information8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationBL-ER-P Ethernet Radio Unit for Pedestal Installation Guide
Assemble the Antenna Riser 1. Remove the antenna riser assembly and the antenna from its packaging. 2. Remove the plastic cap, the nut, and the lock washer from the stem of the antenna. 3. Put the stem
More informationTECH SHEET PEM - REF / THREAD GALLING. SUBJECT: Root causes and guidelines to promote optimized fastener performance TECH SHEET
PEM - REF / THREAD GALLING SUBJECT: Root causes and guidelines to promote optimized fastener performance Introduction Occasionally, users of our self-clinching fasteners encounter thread binding issues
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationPACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
More informationKaterack Wagon Shelving System
Ford Transit Connect Assembly Installation Instructions Sheet 1 of 14 BEFORE YOU START! IMPORTANT INSTALLATION STEPS ARE DENOTED USING A STOP SIGN. THESE STEPS MUST BE PERFORMED IN THE SPECIFIED ORDER
More informationMounting the 6 or 12 Indexer on PRS Gantry Tools
Page 1 Mounting the 6 or 12 Indexer on PRS Gantry Tools About this guide: This document illustrates several options for mounting an indexer onto your ShopBot. You can choose the technique that works best
More informationASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
More informationPickup Box Utility Rack Package Installation (Instruction ID: )
017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation
More informationGRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
More informationMelamine Plastic Laminate. Toilet Partition Installation Manual
Melamine Plastic Laminate Toilet Partition Installation Manual PHONE: FAX: 1-866-317-2786 ATTENTION DO NOT MIX FASTENER PACKS EACH FASTENER PACK HAS THE NECESSARY BOLTS, BARRELS AND SCREWS TO INSTALL THE
More informationMaterial Packing Brown Grey Pine Black White
RTA Connectors Minifix Zinc alloy For housing: 12 or 18 Bolt hole: Ø 7 or 8, depending on choice of connecting bolt Drilling distance B: Distance from centre of Minifix housing to shelf front edge (24
More information1. TOOLS + MATERIALS REQUIRED
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationSPACERS & STANDOFFS. FOR CUSTOM DESIGNS: Visit our online Part Builder at keyelco.com 73 SECTION CONTENTS ASSORTMENT/MOUNT KITS
SPCERS & STNOFFS SECTION CONTENTS SSORTMENT/MOUNT KITS SPCERS Clear Hole.............................. 83 Clear Hole............................... 78 Threaded............................... 83 Economy
More informationOptical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features
Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More informationINSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
More informationTECH SHEET PEM - REF / REPAIR AND REPLACEMENT OF SELF-CLINCHING FASTENERS. SUBJECT: Repair and replacement of self-clinching fasteners
PEM - REF / REPAIR AND REPLACEMENT OF SELF-CLINCHING FASTENERS SUBJECT: Repair and replacement of self-clinching fasteners Properly installed self-clinching fasteners are designed to provide permanent
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationwww.hafeleindia.com www.hafeleindia.com INTRODUCTION Intuitive furniture is the need of the hour. In times like these where every extra square meter is considered as good as gold, installing versatile
More informationUtensil sets. 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides. 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides
Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and
More informationLP-200 Dummy Load / Wattmeter
LP-200 Dummy Load / Wattmeter Enclosure Retrofit Assembly Instructions March 2009 TelePost Incorporated LP-200 is a trademark of TelePost Inc. Material in this document copyrighted 2009 TelePost Inc. 1
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationRMD2000 DPO2000 and MSO2000 Series Rackmount Kit Instructions
xx ZZZ RMD2000 DPO2000 and MSO2000 Series Rackmount Kit Instructions Warning The servicing instructions are for use by qualified personnel only. To avoid personal injury, do not perform any servicing unless
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationProcedure for Constructing Housings for Passive Field Sampling
Page 1 of 5 SOP #: 1130 1.0 Purpose and Applicability Procedure for Constructing Housings for Passive Field Sampling This document outlines a procedure for preparing a weather-proof housing for the Wagner-Leith
More informationLLK-AR45 LED Lighting Heatsink Enclosure Kit. LLK-AR45 LED Illuminator Heatsink Enclosure Kit
Illuminator The lighting heatsink enclosure kit is a highquality and high-performance multi-purpose LED lighting unit. The large, extruded aluminum heatsink has high thermal conductivity, is light weight
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationMAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
More informationSeeMeCNC Guides. Step 2. REV2 Rostock Max v3 Base Assembly. Second edition Rostock Max v3 assembly guide. Written By: JJ Johnson
SeeMeCNC Guides Step 2. REV2 Rostock Max v3 Base Assembly Second edition Rostock Max v3 assembly guide. Written By: JJ Johnson INTRODUCTION This assembly guide will walk you though the steps of assembly
More information1) Place the reactor stand on a sturdy bench with the bottom plate facing toward the front.
Assembly Instructions for ChemRxnHub Reactor Systems 1) Place the reactor stand on a sturdy bench with the bottom plate facing toward the front. Loosen knobs on the right and left using 2 hands of the
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationMonster Tower Phone: U.S. Hwy 411 S. HS1. Installation Instructions and Owner s Manual CAUTION
Monster Tower Phone: 877-778-6937 5714 U.S. Hwy 411 S. www.monstertower.com Maryville, TN 37801 info@monstertower.com HS1 Installation Instructions and Owner s Manual Your HS1 uses many common parts and
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationAll About Die Casting
All About Die Casting FAQ Introduction Die casting is a versatile process for producing engineered metal parts by forcing molten metal under high pressure into reusable steel molds. These molds, called
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More information