lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
|
|
- Theodore Spencer
- 6 years ago
- Views:
Transcription
1 dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are added a LIF P (low board insertion space. force) They design are available that provides with a three low cost, stacked fast, heights, easy and four reliable mounting connection and grounding of flexible options printed and circuits a variety to a P. of size dam and gender Tech s combinations. special contact Our design conforms preserves conductor all applicable integrity requirements while producing of a MIL stable, high pressure D, ISO 2110, connection. I standards This series RS232, includes RS442, single RS449 and dual and row I versions in standards. 2.54mm, 1.25mm, Our low 1.00mm profile metal & 0.50mm shell provides centerlines long-term with vertical cycle life or and horizontal MI/SD orientations. reductions which meet F Part 15, Subpart J emission limits. FTURS:? Superior Maximizes contact available design board protects space conductors? High Three pressure height contacts options, custom designs welcome? Single Four or board dual mounting row versions and grounding options? hoice utomated of 2.54mm, assembly 1.25mm, for consistent 1.00mm & quality 0.50mm and centerlines lower cost MTING OPTIONS: Mates MTING with FP dam & FF Tech L: D-Sub Series: DPD, DSD, DPF, DSF and all industry Mates with standard flat flexible D-Subminiature cable and connectors flexible printed circuits with SPIFITIONS: thickness of 0.3mm Material: Specifications: Shell: Steel, tin-plated Insulator: Material: Polybutylene Terephthalate (PT), glass reinforced Standard thermoplastic, insulator: PT, rated Glass UL reinforced, 94V-O rated UL94V-0 Insulator Optional Hi-Temp color: lack insulator: Nylon 6T, rated UL94V-0 ontacts: Insulator color: Plug - lack rass; Socket - Phosphor ronze Grounding ontacts: Phosphor bracket: Steel, ronze nickel-plated Rivet ontact insert: Plating: rass, nickel-plated Plating: Tin over copper underplate 5 lectrical: µin gold nom. (optional 30 µin) to MIL-G-45204, Type II, Grade on Operating contact voltage: area over 100V 50 µin nickel max. underplate to QQ-N-290, lass 2, Grade urrent, rating: gold flash " on solder Spacing: tails0.5 mp max. lectrical:.049" Spacing: 1 mp max Operation voltage:.100" 600 VD Spacing: max3 mps max urrent ontact rating: resistance: 5 mps 30 mω maxmax. initial ontact Insulation resistance: resistance: mω MΩ max min. Insulation Dielectric withstanding resistance: 5000 voltage: MΩ 500V 1000 for 1 VD minute between adjacent contacts Mechanical: (75 F and 55% R.H.) Dielectric Insertion Force: withstanding 5 oz max voltage: 1000 V rms (sea level) apacitance: Withdrawal Force: 2 pf 3 max oz min between adjacent contacts Mechanical: Temperature Rating: Insertion Operating force: temperature: 10 ozs. max -40 with to " dia. pin Withdrawal Soldering process force: 7.1 temperature: ozs. min with " dia. pin nvironmental: Standard insulator: 235 Operating Hi-Temp temperature: insulator: to +125 SSORIS: PKGING: Dustcovers, hardware. Page 69 nti-sd plastic tubes or trays PKGING: nti-static plastic trays PPROVLS ND RTIFITIONS: PPROVLS UL Recognized ND & S RTIFITIONS: ertified, File no Recognized under the component program of Underwriters Laboratories, Inc. No ertified by anadian Standards ssociation Pb RoHS OMPLINT US 2002 / 95 / lif flex iruit onnetor 2.54mm [.100"] enterline 1.25mm [.049"] enterline 1.00mm ["] enterline HI-TMP INSULTOR V I L L P SRIS INDITOR P = LIF Flex ircuit onnector 0.50mm ["] enterline Pb SerieS ORDRING INFORMTION TYP =.100 centerline in-line footprint =.049 centerline staggered footprint = " centerline staggered footprint D = " centerline inline footprint = " centerline horizontal SMT POSITIONS 02 thru 21 ROW SPING lank = Single Row 20 = 2.00mm P Row Spacing (Type ) 25 = 2.5mm P Row Spacing (Type ) SMT = Surface Mount (Type, ) NTRY NGL T = Top entry S = Side entry S = Reverse side entry (.100" centerline only) OPTIONS dd designator(s) to end of part number HT= Hi-Temp insulator for Hi-Temp soldering processes up to Rahway venue Union, New Jersey T: F: T 20
2 dam Technologies, Inc. lif flex iruit onnetor 1.00mm ["] enterline Pb SerieS pb TOP (") NTRY " TOP SMT NTRY SMT pb SID (") NTRY " SID SMT NTRY SMT P--09-T-SMT = X No. of Spaces = [2.30] = [4.00] P--18-S-SMT = X No. of Spaces = [2.30] = [4.00].110 [2.80].220 [5.60].110 [2.80].142 [3.60].295 [7.50].023 X.090] [0.60 X 2.30].181 [4.60].023 X.090] [0.60 X 2.30].010 [0.25] Recommended P Layout TOP NTRY " THRU-HOL pb (") TOP NTRY THRU HOL Recommended P Layout pb- SID NTRY " THRU-HOL 1.00 (") SID NTRY THRU HOL P--18-T-20 = X No. of Spaces = [2.30] = [4.00].118 [3.00] P--12-S-20 = X No. of Spaces = [2.30] = [4.00].102 [2.60].102 [2.60].118 [3.00] ø.028 [0.70] Recommended P ROMNDD Layout P LYOUT ROMNDD LYOUT Recommended P Layout ø.028 [0.70] Rahway venue Union, New Jersey T: F:
3 dam Technologies, Inc. lif flex iruit onnetor 1.25mm [.049"] &.100 [2.54] enterline Pb SerieS TOP NTRY.049" THRU-HOL pb-b 1.25 (.049") TOP NTRY THRU HOL pb-b SID NTRY.049" THRU-HOL 1.25(.049") SID NTRY THRU HOL [5.0] P--18-T-25 D [5.0] P--12-S [3.5].315 [8.00].315 [8.00].256 [6.5] [.50].049 [1.25].110 [2.80] [.50].049 [1.25] =.049 [1.25] X No. of Spaces = + = + [5.00] TOP NTRY.100" pb-a INLIN THRU-HOL.100"(2.54) TOP NTRY INLIN THRU HOL.089 ROMNDD P LYOUT Recommended P Layout =.049 [1.25] X No. of Spaces [2.050] = + = + [5.00] Recommended P Layout pb-a INLIN THRU-HOL.100"(2.54) SID NTRY INLIN THRU HOL P--10-T P--13-S.177 [4.50].177 [4.50] [.52].100 [2.54].130 [3.30].265 [6.73].118 [3.00].265 [6.73] [.52].100 [2.54] =.100 [2.54] x no. of Spaces = [5.90] = [8.00] ROMNDD P LYOUT Recommended P Layout ø.030 [0.85] =.100 [2.54] x no. of Spaces ø.030 = [5.90] [0.85] ROMNDD P LYOUT = [8.00] Recommended P Layout Rahway venue Union, New Jersey T: F:
4 dam Technologies, Inc. INTRODUTION: dam Tech P Series Flexible Printed ircuit (FP) and Flexible Flat able (FF) connectors are ZIF (zero insertion force) connectors designed to provide a fast, easy, reliable method to make a connection of flexible printed circuits to a P. dam Tech s special contact design completely preserves conductor integrity by eliminating all wiping action while making connection. Flex circuitry enters the connector and the connector cap is pressed down to capture the flex circuit producing a stable, high pressure connection. Raising the cap releases the pressure for exchange or replacement of circuitry. This series includes single and dual row versions in thru-hole or SMT mounting in vertical or horizontal orientations. FTURS: Superior contact design protects conductors High pressure contacts Single or dual row versions hoice of.3mm,.5mm,.8mm, 1mm & 1.25mm centerlines MTING FP & FF: Mates with.3mm,.5mm,.8mm, 1mm & 1.25mm centerline flat flexible circuits with thickness range of 0.1mm to 0.3mm Zif flex iruit onnetor 0.3mm [.012"] enterline 0.5mm ["] enterline 0.8mm [.031"] enterline 1.0mm ["] enterline 1.25mm [.049"] enterline P SerieS SPIFITIONS: Material: Hi-Temp Insulator: LP, Glass reinforced, rated UL94V-0 Insulator color: Natural ontacts: Phosphor ronze ontact Plating: Tin over copper underplate overall lectrical: Operating voltage: 100V max. urrent rating: " Spacing: 0.4 mps max..031" & " Spacing: 0.5 mps max.049" Spacing: 1 mp max ontact resistance: 30 mω max. initial Insulation resistance: 500 MΩ min. Dielectric withstanding voltage: 500V for 1 minute Mechanical: Insertion Force: 0 oz max Withdrawal Force: 13 oz min Temperature Rating: Operating temperature: -40 to +85 Soldering process temperature: 260 PKGING: nti-sd plastic tubes or Tape and Reel PPROVLS ND RTIFITIONS: UL Recognized & S ertified, File no P 1 10 V SRIS INDITOR P = ZIF Flex ircuit onnector ORDRING INFORMTION POSITIONS 03 thru 30 TYP 1 = 1.25mm centerline thru-hole 2 = 1.00mm centerline SMT (body height 2.70mm) 2 = 1.00mm centerline SMT (body height 1.2mm) 3 = 1.00mm centerline thru-hole 4 = 1.25mm centerline SMT 5 =.8mm centerline SMT 6 =.5mm centerline SMT (body height 2.0mm) 6 =.5mm centerline SMT (body height 1.5mm) 6 =.5mm centerline SMT (body height 1.2mm) 6 =.5mm centerline SMT (body height 1.0mm) 7 =.3mm centerline SMT NTRY NGL V = Top entry HL = Side entry, lower contact HU = Side entry, upper contact 3 20 P ROW SPING 20 = 2.0mm Leave blank for SMT FLX IRUIT THIKNSS 3 = 0.1mm 0.3mm (standard for all types) US Pb RoHS OMPLINT 2002 / 95 / HI-TMP INSULTOR V I L L OPTIONS: dd designator(s) to end of part number TR = Tape and reel packaging Rahway venue Union, New Jersey T: F:
5 dam Technologies, Inc. ONTT STION VIWS Zif flex iruit onnetor 0.5mm ["] enterline P SerieS pa-6.5mm (") SID NTRY SMT P-6-16-HU [0.60].012 [0.30] P ORD UPPR ONTT pa-7.3mm (.012") SID NTRY SMT FP WIDTH P ORD LOWR ONTT.136 [3.45] P ORD VRTIL MOUNT P-7-18-HL-3 =.012 [0.30] x No. of Spaces = [0.60] D = [1.30] = [0.63] = [1.80] [1.85].051 [1.30] = X No. of Spaces = [1.14] = [6.60].102 [2.60].260 [6.60] [2.0] D SHOWN WITH LTH OPN.150 [3.80] Recommended P Layout pa-6 TOP NTRY " SMT.5mm (") TOP NTRY SMT pa-5 SID NTRY.031" SMT.8mm (.031") SID NTRY SMT P-6-18-V [3.48] P-5-24-HU [1.70] = X No. of Spaces = [1.14] = [6.60].076 [1.95] =.031 [0.80] X No. of Spaces = [2.05] = [5.80].008 [0.20].154 [3.90].126 [3.20].012 X.059 [0.30 X 1.50] [5.70] [4.30].059 [1.50].031 [0.80].012 [0.30].275 [7.00].138 [3.50] X.126 [2.00 X 3.20].110 [2.80] X.091 [2.50 X 2.30] ROMNDD.047 P LYOUT.031 [0.80] [1.20].086 [2.20] Recommended P Layout Recommended P Layout Rahway venue Union, New Jersey T: F:
6 dam Technologies, Inc. pa mm (") SID NTRY SMT Zif flex iruit onnetor 1.0mm ["] & 1.25mm [.049"] enterline P SerieS pa mm (") TOP NTRY SMT = X No. of Spaces = [2.30] = [7.10].114 [2.90].106 [2.70] P-2-10-HU-3 lso vailable in 1.2mm & 1.5mm ody heights.138 [3.50] P-2-18-V-3 = X No. of Spaces = [2.30] = [7.10].012 [.30].063 [1.60].295 [7.50].06 [1.50].181 [4.60].086 [2.20].142 [3.60].024 [0.60].024 [0.60].086 [2.20] Recommended P Layout.177 [4.50].118 [3.00] Recommended P Layout pa mm (.049") TOP NTRY THRU HOL =.049 [1.25] X No. of Spaces = [2.70] = [7.70] pa mm (.049") TOP NTRY THRU HOL =.049 [1.25] X No. of Spaces = [2.70] = [7.70].394 [10.00].394 [10.00] [5.00] [5.00].090 [2.30].138 [3.50].049 [1.25].090 [2.30] [5.00].138 [3.50].086 [2.20].049 [1.25] P-1-08-V [2.45] P-1-10-HU-3-50 ø.031 [ø0.80] ø [ ø ] [5.00].049 [1.25] Recommended P Layout.049 [1.25] Recommended P Layout Rahway venue Union, New Jersey T: F:
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
More informationHEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationTERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
More informationTERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
More informationTERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More information.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationSeries 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationD-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
More informationIDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
More informationD-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationCALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationPRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
More informationPRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
More informationMultiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
More informationQUADRAX CONNECTOR SERIES
ONNTOR SRIS or Shell Styles MIL-TL-8999/0 & 6 THNIL HRTRISTIS SPIITIONS Temperature Rating: -55 to + 5 orrosion: MIL-ST-0 Method 0, Test ondition Shock: MIL-ST-0 Method, Test ondition Vibration: MIL-ST-0
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationIDC Plug: WTB Through Wire Cap/Wire Stop Cap
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
More informationINSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
More informationPoke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
More informationEMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationAirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationDETAIL SPECIFICATION SHEET
INH-POUND MIL-DTL-32139/5 1 August 2012 DETAIL SPEIFIATION SHEET ONNETORS, ELETRIAL, RETANGULAR, NANOMINIATURE, SINGLE ROW, PLUG, POLARIZED SHELL, PIN ONTATS, VERTIAL PB THROUGH-HOLE TYPE This specification
More informationGeneral Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More informationConnector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
More informationHi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
More information3M Wiremount Socket Series CHG
78-5-- Rev A of M Wiremount Socket Product Specification 78-5-- Released: -- Austin, TX 787-9 78-5-- Rev A Section Table of Contents of Page. Scope........ M Customer Documents......... Performance and
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationSurface Mount Connectors
Surface Mount Connectors 3 As the industry s first surfacemountable connectors to be supplied on a continuous reel, our surface mount connectors are designed to be used as part of Zierick s Surf-Shooter
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More informationBy using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
More informationADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More informationHAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationLGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
More informationSunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS SERIAL ATA CABLE ASSEMBLIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SERIAL ATA CABLE ASSEMBLIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS: 1.0 SCOPE.. 3 2.0 APPLICABLE DOCUMENTS 3
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationFOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB D*U Series Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationD Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
More informationCommercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
More informationMaximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
More informationCover headline Cover headline D-Subminiature Product Overview
Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was
More informationHigh-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
More informationCONTACTING - MODULES TEST SOLUTIONS ENGINEERED TO CONNECT
ENGINEERED TO CONNECT CONTACTING - MODULES TEST SOLUTIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 CONTACTING - MODULES QSEVEN
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
More informationAMP Power Lock Connectors
Product Facts High current handling capability: 31 or 53 amperes maximum depending on application (reference product specs) Modular housings for multiple connector applications Assortment of mounting accessories
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationSINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationAmphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
More informationSunridge MCF Series 2.0mm Mated Height Miniature Coaxial Interconnect
Sunridge MCF series coaxial product fulfills the rigorous requirements of high frequency RF signal transmission in digital world. In a miniature form factor of 3.0mm x 3.0mm PCB foot print by 2.0mm mated
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationVaricon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
More informationIntroducing IDC SSL Connector
Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationElectrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationXA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationPRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
More information