D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series

D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series

Crimp and Poke, Right-Angle and Vertical PCB D*U Series Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with

D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series

D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for

SMB Connectors. RF Coax Connectors. Product Facts

SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are

sealed mini usb connectors

QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

.093 [2.36] Commercial Pin and Socket Connectors

.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold

From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).

121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and

PRODUCT SPECIFICATION

Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,

Cover headline Cover headline D-Subminiature Product Overview

Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors D*M, D*MM, D*MA with NM, NMB option connectors are used when non magnetic characteristics are required. Hermetic

Cover headline Cover headline D-Subminiature Product Overview

Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications ITT Cannon s D-Subminiature product line is engineered to perform in the harshest environments.

PRODUCT SPECIFICATION

1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION

Cover headline Cover headline D-Subminiature Product Overview

Cover headline Cover headline D-Subminiature Product Overview D-Subminiature Connectors Key Markets & Applications Invented by Cannon engineers in 1952 for aircraft radio systems, the D-Subminiature was

PRODUCT SPECIFICATION

Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications

Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.

Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

Amphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:

Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features

SBS Connectors - up to 110 amps

Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order

The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)

Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL

AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance

PRODUCT SPECIFICATION

EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems

PRODUCT SPECIFICATION

MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed

Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size

AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,

AMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin

Signal Contacts Type III+, Crimp, Snap-In [.0625 +.0010.0020 [1.588 +0.025 0.051] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart.

SERIESN50, COAXIAL CONNECTORS

SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.

PRODUCT SPECIFICATION

2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.

1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7

The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from

RR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.

RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without

SINGLE POLE SOCKETS - SOLDER MOUNT

SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin

SBS Connectors - up to 110 amps

SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Contact Size. Contact Wire Max Size Gauge Insulation mm Contact

The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface

SB 50 Connectors - up to 120 amps

Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE

MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact

Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications

Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving

2.5mm Pitch Connector for Discrete Wire Connection

.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by

BNC Connectors (50 ohm/75 ohm)

BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors

Spring Loaded Contacts

Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT

PRODUCT SPECIFICATION

2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

CALL (512 ) x6400

The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide

TEST SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND MATE INTERFACE (BMI) (WIRE TO PCB AND WIRE TO WIRE)

SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND (WIRE TO PCB AND WIRE TO WIRE) 1.0 SCOPE This specification covers the 4.20 mm (.165 inch) centerline connector series terminated with 18 to 24

MINI CIRCULAR DIN PLUGS

MINI CIRCULAR DIN PLUGS 7000 SERIES SERIES. Plug for Cable Solder! Available in 3, 4, 5, 6, 7, 8 and 9 circuits! Voltage rating: 50V AC/DC! With inner metal cover, strain relief cap and plastic hood! Current

D Subminiature Combo D

Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order)

The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.

M22 Connectors Specification

Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

Multiple Density Solder Eyelet

Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel

2.4mm coaxial connectors for frequency test measurements

2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies

PRODUCT SPECIFICATION

0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

M20 Connectors Specification

Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size

Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical

SECTION 7 R114 / R115 / R116 / R117 / R112

SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead

Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27

AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6

Poke-Home Thru-Wire: WTW

Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical

Powerpole Connectors - PP120: up to 240 Amps

Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8

AMPLIMITE Cable Connectors and Shielding Hardware Kits

AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering

SMA - 50 Ohm Connectors

For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,

TNC SERIES General... 4 Interface... 5 Characteristics...6-7

CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...

242, , FAX.

TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz

Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications

Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems

Standard AWG: WTB

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

SERIES SMB SUBMINIATURE CONNECTORS

SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order Ø Ø Ø

The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.

AVX Wire-to-Board Connectors

AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................

PRODUCT SPECIFICATION. This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product.

1 of 10 B 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product. 2.0 Scope This specification is applicable to the termination

Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications

Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the

RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes

Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight

Gecko Connectors Introduction

Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,

PRODUCT SPECIFICATION

ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES

Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms

Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to

SSL - Discrete Wire IDC Contact & Cap

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

Series 300. Miniature Rocker & Paddle Switches

SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors

Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment

Discrete Wire IDC Contact & Cap

The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple

FILTER RACK & PANEL. connectors

FILTER RACK & PANEL connectors table of contents ARINC 404...3 Layouts...3 Shell Sizes 1-4...4 How to order...5 ARINC 600...6 Layouts...6 Shell Sizes 1-3....7 How to order...9 MIL-DTL-83527...9 Layouts...9

DETAIL SPECIFICATION SHEET

INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS

COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2

AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection

2.5mm Pitch Connector for Discrete Wire Connection

.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves

SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST

SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

Interface Mating Dimensions

connectors are subminiature units designed to provide high electrical performance for microwave applications up to 18GHz. Constructed with Brass or high quality stainless steel, connectors ensure excellent

DETAIL SPECIFICATION SHEET

INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical

FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is

Hyperboloid Contacts for High Performance Connectors

Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid

Mar11 Rev J

Product Specification 108-1051 11Mar11 Rev J System, Connector/Header, MTA 156 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) MTA

Cannon Trident Connectors

Contacts General recommendations for the selection of Trident contacts are listed below. Platings: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches

GHz BGA SOCKET - direct mount, solderless

45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression

SMA Description Applications Features

MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,