AMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin

Size: px

Start display at page:

Download "AMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin"

Job Booker
5 years ago
Views:

1 Signal Contacts Type III+, Crimp, Snap-In [ [ ] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart. Contact Body Brass phosph bronze Application Tooling Page 29 Technical Documents Application Specification Product Specification.530 ±.010 [13.46 ±0.25 ] Contact Size 16 Diameter.062 [1.57] (Test Current, 13 Ampere) Single contact, free-air test current is not to be construed as contact rating current. Use only f testing. Refer to contact current carrying capability infmation on page 8. Wire Size Ins. Strip Fm Loose Piece Tooling Part No.** Range Contact Loose Piece Strip Fm AWG mm 2 Range Hand Tool Applicats Gold/Nickel *** *** Sel. Gold/Nickel *** Bright Tin Gold/Nickel Sel. Gold/Nickel *** Gold/Nickel Sel. Gold/Nickel *** Bright Tin *** Gold/Nickel Sel. Gold/Nickel * *** Sel. Gold/Nickel Bright Tin Gold/Nickel *** Sel. Gold/Nickel * *** Sel. Gold/Nickel Bright Tin *** *** Sel. Gold/Nickel *** Bright Tin *** Gold/Nickel Sel. Gold/Nickel *** Sel. Gold/Nickel Bright Tin S *** Gold/Nickel Sel. Gold/Nickel * *** Sel. Gold/Nickel Bright Tin Phos Bronze Gold/Nickel *** Sel. Gold/Nickel *** Sel. Gold/Nickel Bright Tin *** Sel. Gold/Nickel *** 1Overall insulation crimp diameter, including crimp barrel, must not exceed.125 [3.18] [ ] gold in the mating area over [ ] min. nickel [ ] gold in the mating area, with gold flash on remainder, over [ ] min. nickel [ ] gold in the mating area, with gold gradient on remainder, over [ ] min. nickel. 5Contacts can ONLY be used in: Metrimate; CPC Series 1 (Arr ), Series 4 (Arr M, 23-16M, 23-22M), and VDE connects. 6To use with the 626 Pneumatic Tool: remove crimping head from Straight Action Hand Tool (SAHT), der SAHT Adapter Part No , Adapter Holder Part No (with ratchet) (without), and Power Unit Part No (hand actuated) (foot actuated). 7Phosph Bronze SStandard reeling of strip fm contacts. *Commercial PRO-CRIMPER II hand tool f field repair only. Note: Die Set can be adapted f use with 626 Pneumatic Tool System. Insertion Tool Part No (f insulation diameters.070 [1.78] less), No (f insulation diameters.090 [2.29] max.). Extraction Tool Part No (Instruction Sheet ) **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. ***Call Technical Suppt f Machine Applicat Part Numbers. Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt 9

2 Type III+, Crimp, Snap-In Contact Size 16 Diameter.062 [1.57] and Contact Body Copper alloy, plated tin gold Spring Stainless steel Grounding (make first - break last) Related Product Data Application Tooling Pages 29, 30 Technical Documents Page 4 Wire Size Range Ins. Grounding Part No. Strip Fm Loose Piece Contact Applicat Hand Tool** [ AWG Range 1 Strip Fm Loose Piece Part No. Part No Tin Sel. Gold/Nickel * Tin *** Sel. Gold/Nickel *** * Tin *** Sel. Gold/Nickel *** * 1Overall insulation crimp diameter, including crimp barrel, must not exceed.125 [3.18]. 2Gold flash over [ ] min. nickel on entire contact, with [ ] gold in contact area. 3To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, der SAHT Adapter Part No. (Call Technical Suppt at ), Adapter Holder Part No (with ratchet) (without), and Power Unit Part No (hand actuated) (foot actuated). *Commercial PRO-CRIMPER II hand tool f field repair only. Note: Die Set can be adapted f use with the 626 Pneumatic Tool System. **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. ***Call Technical Suppt at f Automatic Machine Applicat Part Numbers. Extraction Tool Part No Type III+, Solder Versions Solder-Type (with Prefmed Wire Barrel/Insulation Suppt) Spring, Stainless Steel 3.90 [9.91] Min [ ].0508 [1.588 ] Body, Brass 1 [27.56] Max. Localized Plate Area.200 [5.08] Min..825 [20.96] Max. 10 Contact Body and Tab Brass See chart on Page ±.010 [13.46 ±0.25 ] Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt

3 Type III+, Solder Versions (Continued) Spring, Stainless Steel Solder Tab [9.91] Min [ ] [1.588 ] Body, Brass.794 ±.010 [20.17 ±0.25 ].020 [0.51] Localized Plate Area.200 [5.08] Min [28.24] Max..365 [9.27] Max. Spring Stainless Steel.120 [3.05].058 [1.47] Ferrule, Brass, Nickel Flash Body Brass Solder Post Brass.105 [2.67].865 [21.97].365 [9.27] Max. Contact Body and Tab Brass See chart..530 ±.010 [13.46 ±0.25 ] Contact Size 16 Diameter.062 [1.57] (Test Current, 13 Ampere) Wire Size Loose Piece Range Contact AWG [ Gold/Nickel Gold/Nickel Solder Duplex Tab Bright Tin [ ] gold in mating area over [ ] nickel. 2Duplex plated [ ] gold in mating area over [ ] nickel on contact body; bright tin-lead on solder tab. 3Bright tin on entire contact. Note: These contacts can be used in Multimate contact cavities of all connect housings. Single contact, free-air test current is not to be construed as contact rating current. Use only f testing. Refer to contact current carrying capability infmation on page 3. Extraction Tool Part No (Instruction Sheet ) Note: All part numbers are RoHS compliant except: Indicates non-rohs compliant. Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt 11

Type III+, Posted (Replacement Contacts, See Note Below).062 [1.58] Ref..025 [0.64] Point of Gold Plating Thk. Measurement.100 [2.54] Spring Stainless Steel.025 ±.001 [0.64 ±0.

4 Type III+, Posted (Replacement Contacts, See Note Below).062 [1.58] Ref..025 [0.64] Point of Gold Plating Thk. Measurement.100 [2.54] Spring Stainless Steel.025 ±.001 [0.64 ±0.03 ] Contact Body and Post Brass Body Brass.525 [13.34] Post Brass See chart. Contact Size 16 Diameter.062 [1.57] (Test Current, 13 Ampere) Loose Piece Termination Post Contact Method Configuration 3 Termination High Post 2 Termination High Post 1 Termination High Post.025 x.025 Sel. Gold/Nickel x 0.64 Bright Tin Wrap-Type.045 x.045 Sel. Gold/Nickel x 1.14 Bright Tin x x 1.57 TERMI-POINT.031 x.062 Clip 0.79 x 1.57 Sel. Gold/Nickel Sel. Gold/Nickel Gold flash over [ ] nickel on entire contact, with [ ] gold to a distance of.200 [5.08] from mating end. Gold thickness controlled on socket O.D. Posts plated tin-lead over copper. Extraction Tool Part No (Instruction Sheet ) Insertion Tool Part No Note: These contacts are used as replacement contacts f all posted connects. Single contact, free-air test current is not to be construed as contact rating current. Use only f testing. Refer to contact current carrying capability infmation on page Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt

5 Enhanced High Current Type III+, Crimp, Snap-In [ [ ] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart. Contact Body Copper Nickel Alloy Contact Size 16 Diameter.062 [1.57] Ratings Multiplication Rating Fact (F) Type III+ Contacts (Note: 1 = 17 amperes) Related Product Data Application Tooling Pages Technical Documents Application Specification Product Specification.530 ±.010 [13.46 ±0.25 ] Wire Size Ins. Strip Fm Loose Piece Tooling Part No.** Range Contact Loose Piece Strip Fm AWG mm 2 Range Hand Tool Applicats Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt *** Gold Tin *** Gold *** Tin *** 1 Overall insulation crimp diameter, including crimp barrel, must not exceed.125 [3.18]. 2 Contacts can ONLY be used in CPC, Series 1 (Arr ), Series 4 (Arr M, 23-16M, 23-22M), and VDE connects. 3 To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, der SAHT Adapter Part No , Adapter Holder Part No (with ratchet) (without), and Power Unit Part No (hand actuated) (foot actuated). **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. *** Call Technical Suppt f Automatic Machine Applicat Part Numbers. Voltage: 250 Volts AC/DC 600 Volts AC/DC, Series I, VDE tested and select loaded only Base Current: Type III+ contacts: 17 amperes, 30 C temperature rise with single contact on 14 AWG wire Enhanced High Current Type III+ contacts: 25 amperes, 30 C temperature rise with single contact on 14 AWG wire Temperature: -55 C to +105 C VDE 0627: XA/630/4KV/2 - Series I, VDE tested only Percent Connect Loading Single Circuit 50% 100% Shell Size Wire Size Wire Size Wire Size 30 AWG 14 AWG 30 AWG 14 AWG 30 AWG 14 AWG Enhanced High Current Type III+ Contacts (14 AWG wire only - Note: 1 = 25 amperes) Percent Connect Loading Shell Size Single Circuit 50% 100% 14 AWG 14 AWG 14 AWG Enhanced High Current Contacts & M Series Connects: (Note: 1 = 24 amperes) Single Circuit 50% 100% 14 AWG 14 AWG 14 AWG Enhanced High Current Contacts & Metrimate Connects: (Note: 1 = 24 amperes) Single Circuit 50% 100% 14 AWG 14 AWG 14 AWG

Type II, Screw Machined, Crimp Contact Body Brass 1.087 ±.010 [27.61 ±0.25 ].472 ±.005 [11.99 ±0.13 ] Contact Body.000030 [0.00076] gold over.000050 [0.00127] nickel.

6 Type II, Screw Machined, Crimp Contact Body Brass ±.010 [27.61 ±0.25 ].472 ±.005 [11.99 ±0.13 ] Contact Body [ ] gold over [ ] nickel. Gold thickness controlled on socket O.D..107 Max. [2.72] Spring.062 ±.001 [1.57 ±0.03 ] Body Related Product Data Application Tooling Pages Spring.795 ±.010 [20.19 ±0.25 ] Body Contact Size 16 Diameter.062 [1.57] (Test Current, 13 Ampere) Tooling Part No.** Wire Size Ins. Tape Mounted Loose Piece Contact Tape Mounted Loose Piece Range 2 Col Dies f Die Set f AWG mm 2 Range1 Code AMP-TAPETRONIC 626 Pneumatic Hand Machine Tool System Tool Red/Red * * Red/Red Green * * Yellow/Red * * Yellow/Red No. Ins * (Two) (Two) Suppt Blue * * * Blue/Blue * No Ins * Suppt, ,6 Blue/Blue * ,6, Violet/Blue No Ins * Suppt Violet/Blue * 1Overall insulation crimp diameter, including crimp barrel, must not exceed.125 [3.18]. 2F AMP-TAPETRONIC Machine No , der contacts by Tape Mounted, plus packaging code IM REEL (5000 parts per reel). 3Grounding pin is used to provide a make-first/break-last condition when mating and unmating connect halves. 4Use turret TH502 ( ) with hand tool Use turret TH501 ( ) with hand tool length is.630 ±.005 [ ±.127 ] on these two pins. 7Die Set requires C Head Adapter Part No ; Adapter Holder Part No (with ratchet) (without); and Power Unit Part No (hand actuated) (foot actuated). *Commercial PRO-CRIMPER II Hand Tool f field repair use only. Note: Die Set can be adapted f use with the 626 Pneumatic Tool System. **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. Does not use Hand Tool Single contact, free-air test current is not to be construed as contact rating current. Use only f testing. Refer to contact current carrying capability infmation on page 8. Insertion Tool Part No (f insulation diameters.070 [1.78] less). Extraction Tool Part No Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt

7 Size 20 DF, Crimp, Snap-In With Insulation Suppt Contact Size 20 Diameter.040 [1.02] *See Product Spec Max. [9.91].575 [14.61] [.0400 ±.0015 [1.02 ±0.034 ].150 [3.81] Localized Gold Plate Area Body Brass Phosph bronze Contact A Select gold flash over nickel on entire contact, with additional [ ] gold on mating end B Duplex plated [ ] gold on mating end, tin on termination end, with entire contact nickel underplated C Gold flash over nickel on entire contact D Duplex plated gold flash on mating end, tin on termination end, with entire contact nickel underplated Insertion/Extraction Tool Part No Instruction Sheet This tool includes interchangeable tips to Insert/Extract: Size 22, AWG [ Crimp Contacts Size 20, AWG [ Crimp and Solder Cup Contacts Size 20, Posted Contacts Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt.555 [14.1].370 [9.34] Max..055 [1.40] Min. Localized Gold Plate Area Wire Ins. Contact Contact Part Nos. Tooling** Col Size Code Strip Fm Hand Range Max. Code (Loose Strip Fm Loose Piece Strip Fm Loose Piece Applicat Tool Piece) A B Blue C Dot AWG D [ A B Black Dot D A AWG.050 B Yellow [ C Dot D A AWG.060 B Red [ C Dot D To use with the 626 Pneumatic Tool System: remove the crimping head from the Straight Action Hand Tool (SAHT) Assembly, der SAHT Adapter Part No. (Call Technical Suppt at ), Adapter Holder Part No (with ratchet) (without), and Power Unit Part No (hand actuated) (foot actuated). F complete infmation on AMP Strip Fm Applicats f fully automatic and semiautomatic machines, contact Technical Suppt: Note: Commercial PRO-CRIMPER II Maintenance and Repair Hand Tool f Wire Size AWG [ (Ins. Max..040 [1.02]), and Wire Size AWG [ (Ins. Max..060 [1.52]) Part No Note: Die Set Part No can be adapted f use with the 626 Pneumatic Tool System. **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. Note: All part numbers are RoHS compliant except: Indicates non-rohs compliant. 15

Size 20 DF, Crimp, Snap-In (Continued) Without Insulation Suppt Max..550 [14.0] [9.91].0400 ±.0015 [1.02 ±0.034 ].150 [3.81] Localized Gold Plate Area Point of Measurement.100 [2.54].530 [13.46] Max.

8 Size 20 DF, Crimp, Snap-In (Continued) Without Insulation Suppt Max..550 [14.0] [9.91].0400 ±.0015 [1.02 ±0.034 ].150 [3.81] Localized Gold Plate Area Point of Measurement.100 [2.54].530 [13.46] Max. Wire Size Range Ins. Max. Contact Part Nos. Tooling** Contact Strip Fm Hand Code Applicat Tool Strip Fm Loose Piece Strip Fm Loose Piece Col Code (Loose Piece) AWG.068 [ A C AWG.068 [ A C Red Dot 16 A AWG.068 B Green [ C Dot D F complete infmation on AMP Strip Fm Applicats f fully automatic and semiautomatic machines, contact Technical Suppt: Note: Wire insulation diameter is limited by the connect housing cavity and clearance f the insertion/extraction tool. **There are power options available f these tools/dies. See Battery Powered Crimp tool Kit and SDE Electric Terminat on page 30. Note: All part numbers are RoHS compliant except: Indicates non-rohs compliant. Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt

Size 20 DF, Solder, Snap-In Contact Size 20 *See Product Spec 108-40005 Max..133 [3.38] Max..580 [14.73] [9.91].0400 ±.0015 [1.02 ±0.034 ].

Contact Gold flash over nickel on entire contact, with additional.000030 [0.

9 Size 20 DF, Solder, Snap-In Contact Size 20 *See Product Spec Max..133 [3.38] Max..580 [14.73] [9.91].0400 ±.0015 [1.02 ±0.034 ].155 [3.94] Localized Gold Plate Area.560 [14.22] Ref. Brass Phosph bronze.070 Max. [1.78] Max. Contact Gold flash over nickel on entire contact, with additional [ ] gold on mating end Contacts to be soldered to wire befe being inserted into housing. 18 AWG [ Max. Wire Strip Fm Loose Piece Catalog Dimensions are in inches and Dimensions are shown f Technical Suppt 17

AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No.

AMP Precision Pin and Socket Contacts [ ] A ± [6.35] Dia. Ferrule Part No Part No. Coaxial Contacts Subminiature, Crimp, Snap-In, Size 16 1.010 [25.65] Ref..650 [16.51] Ref. 0.107 +.005.000 [2.718 +.127.000].250 [6.35] A ±.003 ±.076 Material Outer Shell Brass per MIL-C-50 Center Conductor