Combimate stamped & formed contacts

Transcription

1 Designed for compatibility with AMP Type III+ Contact product lines and Multimate Connectors¹: M Series Econoseal Metrimate Series G CPC Circular Plastic Connectors These are developed by in order to comply with the market requirement for a fully compatible contact with the AMP Type III+ contact product lines. This Combimate contact is a 1.60 mm stamped and formed snap-in contact with a brass contact body available, male & female, on carrier strip or can be ordered in bulk. The stainless steel, 3-point retention spring mounted on the contact, guarantees optimum retention without interfering with the electrical contact parameters. A complete range of AWG and plating is available. ¹ Multimate, M Series, Econoseal, Metrimate, Series G and CPC are trademarks of AMP Incorporated. Subject to change without prior notice

2 Jevons Inc. 72 Proctor Rd, Schomberg, ON L0G 1T0 CANADA

3 Jevons Inc. 72 Proctor Rd, Schomberg, ON L0G 1T0 CANADA

4 Pin contact PIN contacts AWG wire size mm² Insulation Ø (mm) contact plating Sn 2-4 µm (dull tin)? Pin standard: 710.xxx-xx Pin long: 715.xxx-xx socket: 760.xxx-xx

5 Pin contact Socket contact PIN contacts contact plating Sn 2-4 µm (dull tin)? Pin standard: 710.xxx-xx AWG wire size mm² Insulation Ø (mm) Pin long: 715.xxx-xx SOCKET contacts AWG wire size mm² Insulation Ø (mm) socket: 760.xxx-xx contact plating Plating Specifications: Pin contact ¹ Au 0.38 µm: plating area A: 0.38 µm Au minimum over µm Nickel plating area B: Au flash over µm Nickel plating area C: Au flash over µm Nickel ² Au 0.75 µm: plating area A: 0.75 µm Au minimum over µm Nickel plating area B: Au flash over µm Nickel plating area C: Au flash over µm Nickel ³ Sn (100%) 2-4 µm: plating area A: 2-4 µm Sn bright plating area B: 2-4 µm Sn bright plating area C: 2-4 µm Sn bright? Sn (100%) 2-4 µm: plating area A: 2-4 µm Sn dull plating area B: 2-4 µm Sn dull plating area C: 2-4 µm Sn dull Socket contact : not available Jevons Inc CANADA L0G 1T0 sales@jevons.on.ca Website: PO 989, th Line 72Box Proctor Rd, Tottenham, Ontario Schomberg, ON Canada LOG 1W0 Multimate, M Series, Econoseal, Metrimate, Series G and CPC are trademarks of AMP Incorporated.