2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
|
|
|
- Deborah Bishop
- 5 years ago
- Views:
Transcription
1 mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile design with mounting height.mm. () Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. () For horizontal connection, the board to board size is the low profile of.mm. () Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. (1) The board pre-fixed kink is treated with the post pin. () The style employs a scoop-proof and sturborn box type. () The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. () The in-line adapter is available to insert and in-line the ID socket from both sides.. UL, CSA Certified Applications Business equipment such as copy machine and printer B
2 Product Specifications Rating Current rating Note 1 Crimping Wire size to AWG : A AWG : A AWG : 1A Operating Temperature Range Operating Humidity Range Storage Temperature Range -ç to +ç (Note ) 0% to 80% (Note ) -ç to +0ç (Note ) Voltage rating Crimping 0V AC Storage Humidity Range 0% to 0% (Note ) Rating UL-CSA Safety Standard and Approved specification Rated Current Rated Voltage AWG : A Wire size AWG : A (Note ) AWG : 1A 0V AC UL CSA Safety Standard File No. UL : E CSA : LR99 Item Specification Condition 1. Insulation Resistance 00Mø min. 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC, 1 minute. Contact Resistance 0mø max 0mA. Single Insertor/Extraction Force 0.N(0gf)min,.N(0gf)max. Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1μs or more Frequency : to Hz, single amplitude of 0. mm, hours in each of the directions.. Humidity (Steady state) Contact resistance : 0mø max. Insulation resistance : 00Mø min. 9 hours at temperature of 0ç and humidity of 90% to 9%. Temperature Cycle Contact resistance : 0mø max. Insulation resistance :00Mø min. (-ç : 0 minutes to ç: minutes 8ç: 0 minutes to ç: minutes) cycles 8. Durability (Mating/un-mating) Contact resistance : 0mø max. Tin plating : 0 cycles Gold plating: 0 cycles THT type Flow : 0ç for seconds Manual soldering : 00ç for seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. SMT type Reflow : At the recommended temperature profile Manual soldering : 00ç for seconds Note 1 : Current rating of header is A. Note : Includes temperature rise caused by current flow. Apply to crimping contact type. Maximum operating temperature of receptacle type is 8ç. Note : Please use under conditions with no condensation occurred. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : Apply to crimping contact type. Materials / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Black UL9V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated Receptacle Insulator Polyamide Black UL9V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator Polyamide Black UL9V-0 Contact Brass Tin plated or gold plated Insulator Polyamide Beige UL9V-0 SMT Pin Header Contact Brass Tin plated or gold plated Metal tab Brass Tin plated In-line Plug Insulator Polyamide Black UL9V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated In-line Adapter Insulator Polyamide Black UL9V-0 Contact Brass Tin plated B
3 Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF - * q w S - C e r t Contact Application pattern q Series Name : DF, A, AA, EA t Connection Form/Contact Style w Number of Contacts : ~ C : Crimp socket e Connector Type S : Socket DSA : Straight through hole DS : Right angle through hole P : Pin Header V : Straight SMT EP : In-line Plug H : Right angle SMT r Contact Pitch : mm A : Adapter DF - EPPCFA q w e r q Contact Type e Contact Type/Packaging Type Blank : For socket SCF : Socket contact, Reel EP : For in-line plug SC : Socket contact, Pack w Applicable Wire Size PCF : Plug contact, Reel : AWG PC : Plug contact, Pack : to AWG r Plating Type Blank : Tin plated A : Gold plated (Plug contact) C : Gold plated (Socket contact) DF- S-C DF(A)- P-DS(**) DFEA-πP-H(**) DFAA- EP-C Panel DF- S-C DFEA-πP-V(**) DF(A)- P-DSA(**) DF- S-DSA(**) DF(A)- P-DS(**) DFEA-πP-H(**) Panel DFAA- EP-C DFEA-πP-V(**) DF(A)- P-DSA(**) B9
![Crimping Socket [Specific No.] (* *), * * Blank : 0pcs/pack This picture shows the Contact crimped status.](/docs-images/83/88191890/images/4-0.jpg "DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-8S-C(**) Receptacle -000-8 ** -000-0 ** -000- ** -00- ** -000-9 ** -00-1 ** -0009- ** No.")
4 Crimping Socket [Specific No.] (* *), * * Blank : 0pcs/pack This picture shows the Contact crimped status. DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-8S-C(**) Receptacle ** ** ** -00- ** ** ** ** No. of Contacts 8 A B RoHS Note1 : The product's contact number indicated. Note : The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag. 0 0 DF-19S-C(**) -00- ** DF-S-C(**) -00- ** DF-S-C(**) ** DF-S-C(**) ** DF-S-C(**) -00- ** DF-S-C(**) -00- ** DF-S-C(**) ** No. of Contacts 09 [Specific No.] (* *), * * () : Tin plated, Tube packaging () : Gold plated, Tube packaging A B RoHS 0 Note1 : The product's contact number indicated +0.1 Board Through-hole Diameter : Ø Unit: mm No. of Contacts A B Tube Package Quantity RoHS No. of Contacts A B Tube Package Quantity RoHS DF-S-DSA(**) ** 0 80 pieces DF- 9S-DSA(**) ** 09 pieces DF-S-DSA(**) ** 0 0 DF-S-DSA(**) -00- ** 1 DF-S-DSA(**) ** 8 DF-S-DSA(**) -00- ** DF-S-DSA(**) ** 0 DF-S-DSA(**) ** DF-S-DSA(**) -00- ** DF-S-DSA(**) ** 1 DF-S-DSA(**) -00- ** 0 DF-S-DSA(**) ** 0 DF-8S-DSA(**) ** 8 DF-S-DSA(**) -01- ** Note : Please order the tube packaging at the multiplied tube packaging quantity (pieces). B
5 Straight Pin Header +0.1 Board Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø Tin Plating Gold Plating DFA- P-DSA -0-0 DF- P-DSA(01) DFA- P-DSA -0- DF- P-DSA(01) DFA- P-DSA -0- DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- P-DSA DF- P-DSA(01) DFA- 8P-DSA DF- 8P-DSA(01) DFA- 9P-DSA -01- DF- 9P-DSA(01) DFA-P-DSA DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) DFA-P-DSA -01- DF-P-DSA(01) DFA-P-DSA -01- DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) DFA-P-DSA DF-P-DSA(01) Note : The quantity for delivery is determined per bag (0 pcs.). If needed, please order the products per bag. Right Angle Pin Header Board Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø No. of Contacts 8 9 A 0 B 0 0 RoHS Tin Plating Gold Plating DFA- P-DS DF- P-DS(01) DFA- P-DS -00- DF -P-DS(01) DFA- P-DS -01- DF- P-DS(01) DFA- P-DS -0-9 DF- P-DS(01) DFA- P-DS -0-1 DF- P-DS(01) DFA- P-DS -0- DF- P-DS(01) DFA- 8P-DS -0- DF- 8P-DS(01) DFA- 9P-DS -0-0 DF- 9P-DS(01) DFA-P-DS -0- DF-P-DS(01) DFA-P-DS -08- DF-P-DS(01) DFA-P-DS DF-P-DS(01) DFA-P-DS DF-P-DS(01) DFA-P-DS DF-P-DS(01) DFA-P-DS DF-P-DS(01) Note : The quantity for delivery is determined per bag(0pcs.). If needed, please order the products per bag. No. of Contacts A B RoHS 0 0 B
6 Straight Pin Header (SMT) 1. P= A... Number of Contacts B BPCB mounting pattern C Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-8P-V(**) DFEA-9P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**) DFEA-P-V(**).9 HRS marking (0.) No. of Contacts [Specific No.] (* *), * * (1) : Tin plated packaging (1) : Gold plated packaging C RoHS Note1 : Please order the emboss packaging product by the reel number. (1 reel : 00pcs.) 8 9 Cavity No. A 0 0 B Configuration of to position Cavity No. HRS marking B
7 Right Angle Pin Header (SMT) P= A.. 1 Number of Contacts 1. B BPCB mounting pattern DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-8P-H(**) DFEA-9P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) DFEA-P-H(**) ** ** ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** ** ** ** ** -0-0 ** No. of Contacts 8 9 Note1 : Please order the emboss packaging product by the reel number. (1reel : 00pcs.) (0.) HRS marking A 0 0 Cavity No. B [Specific No.] (* *), * * (1) : Tin plated embossed packaging (1) : Gold plated embossded packaging C RoHS Configuration of to position Cavity No. HRS marking B
8 In-line Plug Photo: Contact inserted status No. of Contacts A B RoHS No. of Contacts A B RoHS DF- EP-C -0-0 DF- 9EP-C DF- EP-C -0-0 DF-EP-C DF- EP-C -0-8 DF-EP-C -00- DF- EP-C -0-0 DF-EP-C -00- DF- EP-C -08- DF-EP-C DF- EP-C -09- DF-EP-C DF- 8EP-C DF-EP-C -00- Note : The specific No."None" item is delivered per bag (0pcs.). Please order products per bag unit. In-line Plug with Panel Lock Photo: Contact insertion status BPanel Cutouts No. of Contacts A B C D E RoHS DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C DFAA- EP-C Note1 : Applicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note : Use the non-radius surface at DFAA- 8EP-C the hooking panel edge. DFAA- 9EP-C Note : Contact No. indicates 1,, 8, DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C DFAA-EP-C , and. Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. B
9 In-line Adapter with Panel Lock BPanel Cutouts Adapter to in-line by pushing pcs. of socket from both sides No.1-No.1 connection circuit type DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- EP-A DF- 8EP-A DF- 9EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A DF-EP-A No. of Contacts 8 9 A B C D E RoHS Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. Note1 : Applicable panel thickness is 1. to 1.0mm.(However,backlash will occur except for 1., 1.mm thickness.) Note : Please use the non-radius surface at the hooking panel edge. B
10 Crimping Contact for Socket DF-SCF DF-SC DF-SCFC DF-SCC DF-SCF DF-SC DF-SCFC DF-SCC Crimping Contact for In-line Plug ULstyle Jacket Diameter to to Applicable Cable Wire Size AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG AWG Stranded Wire Conductor 1/0. 1/0. 1/0. 1/0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. /0. Packaging,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO(A) Note : Applicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. DF-EPPCF DF-EPPC DF-EPPCFA DF-EPPCA -0- Applicable Cable ULstyle Jacket Diameter Wire Size Stranded Wire Conductor AWG / AWG /0. 1 AWG / AWG AWG AWG /0. /0. / AWG / AWG /0. 1 AWG / AWG AWG AWG /0. /0. /0. Packaging,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO(B) Note : Applicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. RoHS RoHS BApplicable Crimping Tool Applicator Press Unit Type Hand Crimping Tool Extraction Tool AP-DF-S AP-DF-S AP-DF-EPP CM-C DF-TAHC DFEP-TAHC DF-TAHC DF-C-PO (A) Applicable Contact DF-SCF/SCFC DF-SCF/SCFC DF-EPPCF/PCFA DF-SC/SCC DF-EPPC/PCA DF-SC/SCFC DF-****SC(F)(C) DF-EP****PC(F)(A) Note1 : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. Note : Please follow the "Crimping quality standards" and "Table of crimping condition" when crimping contacts. B
11 Crimped contacts with cable assemblies Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. 1 DF-SF DF-SCF Wire Type UL0 Applicable wire size AWG DF-S - A Crimped condition / Terminal treatment A Both-end crimped B Single-end crimped / Without terminal treatment S Single-end crimped / With terminal treatment Terminal treatment : Stripped jacket DF-S-A9-00(0) Packaging 0pcs/pack Finish Tin plated Note1 : Bag packaging (0pcs/pack). Order by number of packs. Note : Please contact our sales representative when using the other specifications. Wire color 9 White 0 Black Wire length 00 00mm B1
12 BEmbossed Carrier Tape Dimensions Straight Pin Header R Product Type Size No. of Contacts A B C D DFEA-*P-V(**) Right Angle Pin Header ±0.1 Ø E E C 0.1 ±0.1 ±0.1 E 1.±0.1 C±0.1 B±0.1 A±0. B 0.1 A to to 8 to to E E E-E ± Carrier hole +0.1 (Ø1. 0 ) far side Carrier hole +0.1 (Ø1. 0 ) far side ر0. 0 (D+) MAX.... Ø0± Ø80 ( 80 ) D Unreeling direction E R ±0.1.1±0. 1.±0. D + 0 (D+)MAX Product Type Size No. of Contacts A B C D to.0.. DFEA-*P-H(**) to to to.0... B
13 BPrecautions 1. Recommended Temperature Profile (SMT) 0 0 secmax MAX 0 TEMPERATURE TIME (sec) 90 0sec 0secMAX PRE-HEATING TIME SOLDERING TIME [Applicable Conditions] 1.Peak temperature : a maximum of 0ç for no more than seconds.heating unit : no less than 0ç for no more than 0 seconds.preheating unit : 0 to 0ç for 90 to 0 seconds.number of times : no more than times * Measurement is conducted at the contact lead part As it may change depending on the conditions such as solder paste types, manufacturers, PCB size, and other soldering materials, please fully check the mounting conditions before use. (Note 1) This temperature profile is a recommended value.. Recommended Manual Soldering Condition (SMT) Soldering iron temperature : 90±ç, Soldering time: Within seconds. Recommended Screen Thickness (SMT) 0. to 0.mm. Board Warpage (SMT) Based on both connector edges, 0.0mm max. in the connector center portion Flow Condition with Automatic Soldering Tool. Soldering temperature : 0±ç, Soldering time : Within seconds. Recommended Soldering Condition (DIP) Manual Soldering Condition. Soldering iron temperature : 90±ç, Soldering time : Within seconds. Cleaning Condition Refer to the "Wire-to-Board Connector Use Hand book". IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the push/pull feeling etc. Please contact us when you use other cleaning agents. ). Connection Condition Refer to the "Wire-to-Board Connector Use Hand book". 8. Precations Refer to the "Wire-to-Board Connector Use Hand book". B19
14 Powered by TCPDF ( DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) B0
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/75/71817925.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/88/114674935.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
![2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)](/thumbs/95/122825409.jpg "2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)")
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series Features Common to all series 1. High Operating Temperature DF59 s are
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
SSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Contact Size. Contact Wire Max Size Gauge Insulation mm Contact
The Industrial and Solid State Lighting markets continue to look for new products which will reduce size and cost without jeopardizing performance. The new dual-beam boxed contact system from AVX surface
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
Plug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
Miniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions. pr..2 Copyright 2 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features. Small high density Outer diameters - plugs (max): mm :, and
VersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply
65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Unique locking mechanism is contained inside the header Socket and header design avoids
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
IDC Plug: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ENVIRONMENTAL MECHANICAL ELECTRICAL HOW TO ORDER 00X
AVX developed the 9159 Series of SMT connectors for co-planar PCB mating for the challenging Solid State Lighting (SSL) market. These connectors needed to be small, low in height, carry up to 5 Amps/contact
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
For FPC. FPC connectors (0.3mm pitch) Back lock
0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
Miniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions.. Features. Small high density Outer diameters - plugs (max): mm :, and positions mm : 2, and positions 2. Simple push-in/ pull-out mating