CAT 6 Data Wiring System Connectors
|
|
- Justin Jacobs
- 5 years ago
- Views:
Transcription
1 CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these products easily support Gigabit Ethernet (1BASE-T/1BASE-TX), which is the next generation of high-speed applications. 2. A Product Lineup Focused on Building of a Complete System In addition to modular plugs, Hirose Electric offers box type outlets, patch panels, and wall outlets. Systems built using all components from the same manufacturer will assure stable data transfer. 3. Support of a Wide Variety of Manufacturers' CAT Cable To assure high performance of the system we test and monitor data transfer using CAT cables manufactured by different suppliers. Attenuation/PSNEXT (db) Permanent Link PSACR CAT PSNEXT standard value 3 1 CAT Attenuation standard value 8.4w 1
2 Plugs, Boots Specifications Rating Current rating Voltage rating 1A 125V AC Operating temperature range -25ç to +ç (Note) 1. Insulation resistance 2. Withstanding voltage (between adjacent contacts) 3. Contact resistance 4. Vibration 5. Shock. Durability (mating/un-mating) 7. Temperature cycle 8. Humidity 9. Salt Spray Item Specification Conditions 1 M ohms min. No flashover or insulation breakdown. 23 m ohms max. No electrical discontinuity of 5μs min. Contact resistance : 25m ohms max. No electrical discontinuity of 5μs. min. Contact resistance : 25m ohms max. Contact resistance : 25m ohms max. Contact resistance : 25 m ohms max. Insulation resistance : 1 M ohms min. Materials and Finishes Plugs Boots Component Insulator Contacts Strain relief clamp Component Insulator Contact resistance: 25 m ohms max. Insulation resistance: 1 M ohms min. (High humidity) Insulation resistance: 1 M ohms min. (Dry state) Contact resistance: 25 m ohms max. Note: Includes temperature rise caused by current flow. Ordering Information Polycarbonate Phosphor bronze Brass 1 V DC 5 V AC / one minute 1mA Frequency: 1 to 55 Hz, single amplitude of.75 mm, 1 octave/min. conduct, 1 cycles to each 3 directions. Acceleration of 49 m/s 2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the axes. cycles Temperature : -55±3ç +15ç to +35ç +85±2ç +15ç to +35ç Duration (Minutes): 3 2 to to 3 5 cycles 5 hours at temperature of ç and humidity of 9% to 95%. 5% salt water/48 hours. Material Finish Remarks EPTR Color: Clear Contact area: Gold plated Nickel plated White (Standard color) Black, red, blue, yellow, green, orange, gray, light blue UL94V Material Finish Remarks Plugs 1 Series name : TM23 TM23 - P - 8 8P 2 Connector type P : Plug Inserted contacts Size 8 : 8 contacts 8P : 8 contacts UL94V Boots 1 Series name : TM23 TM23 - P - 8 BT Connector type P : Plug 3 Size 8 : 8 contacts 4 BT : Boot Jacks 1 Series name : TM23 TM23 R - 5A Connector type R : Jack 3 Mounting style/termination type 5A : Right-angle/through hole 4 Jack opening code 8 : For 8 contacts 5 Number of inserted contacts 8 : 8 contacts 2
3 Plugs BOverview. Contact configured for CAT performance...5 mm dia. solid wire or AWG #24 stranded wire.. Use with cables having external diameters of 5.4 mm to.8mm.. Strain relief clamp protects the contact/conductor termination areas. Connecter guide insert (Shown inserted) Part No. TM23P-88P (25) 24 CL No. RoHS TM23P-88P YES C (17.5) BMated with corresponding receptacle (Shown for reference only) 8.9 Plug body Connector guide insert * (12.9) Contact No. 1 Contact No Strain relief clamp * (15.45) * Supplied separately(1bag contains 1pcs.) 3
4 Boots BOverview. Dedicated boots for the TM23P-88P.. 9 color variations.. Halogen-free.. Protects the plug s lock/release lever Ø (12) (4) TM23P-8-BT (.5) 13.4 (1.9) (17.2) Part Number CL No. Color RoHS TM23P-8-BT(1) TM23P-8-BT(1) TM23P-8-BT(2) TM23P-8-BT(3) TM23P-8-BT(4) TM23P-8-BT(5) TM23P-8-BT() TM23P-8-BT(7) TM23P-8-BT(8) White Black Red Blue Yellow Green Orange Gray Light Blue YES Protected lock/release lever () Ø.8MAX BBoot installed TM23P-88P 4
5 Manual Termination Tool HRS marking side (For contact/conductor termination) A Jacket Part No. Filler Conductor CL No. HT1-TM23/22P-88P * Changing the A Assembly parts to TM22 dedicated clamp parts will allow wiring of Hirose s TM22P-88P plugs supporting CAT 5e. Automatic Contact Termination Machine Item Body Applicator Recommended Cable Specification Conductor Individual conductor insulation dia. Reverse side (For cable strain relief clamp crimping) Part Number CM-15 AP15-TM23P-88P Cable Strain Relief Clamp Crimping Jig (Manual operated) Part Number CL No. TM23P-88P/CK-MP(1) CL (1) Solid copper conductor:.5mm dia. Stranded copper conductor: AWG#24 (.95mm to 1.5mm) CL No. CL CL Insulation Overall jacket dia. (5.4mm to.8mm) Note: To achieve CAT performance, refer to TM23P-88P Cable Termination Procedure Manual(ETAD-E2415). 5
6 Jacks BOverview. Unique contact structure designed for crosstalk reduction.. (Through hole : 3 rows). Temporary retention to board with integral flexible posts Contact No. 8 Contact No Flexible post Part Number CL No. Color RoHS TM23R-5A-88(5) Black YES Note: The jack by itself does not clear CAT performance requirements. Compensation on the board is required to secure CAT performance BPCB mounting pattern Ø Ø Connector front edge Recommended board thickness: 1.mm
7 Precautions in System Construction The TM23 Series connector and components were designed for CAT data transfer. However, it is highly recommended that the entire connected system be checked for this performance level. Cable termination procedures Cable termination procedure manual No. ETAD-E2415 Part Number TM23P-88P Recommended Cable Manufacturers Hirose Electric closely examines the transfer performance of these connectors with the CAT cable that is manufactured and sold by the various cable manufacturers. Please use the cable from among those indicated in Table 1 for system construction with the TM23 Series. Table1 Recommended Cable Manufacturers Manufacturer's Name Web Site Hitachi Cable, Ltd. Tonichi Kyosan Cable, Ltd. NipponSeisen Co. Ltd. Okano Electric Wire Co., Ltd. Tsushin Kogyo K.K. Showa Electric Wire & Cable Co., Ltd. Fuji Electric Cable Co, Ltd. Note: Please see the web sites of the various manufacturers for cable specifications. Contact HRS for recommendations when using cables from other suppliers. Use of Different Manufacturers' Components Use of different manufacturers' components in one system could cause the deterioration of transfer performance. Check of the System Performance Verification All measures have been taken to assure the transfer performance of the TM23 series. However, it is highly recommended to verify transfer performance of complete system using commercially available measuring instruments. Hirose Electric does not build wiring systems. Please contact Hirose Electric sales representative for system construction contractor information. 7
8 Powered by TCPDF ( TM23 Series CAT Data Wiring System Connectors Technical Documentation CAT Transmission Characteristics Data This is representative transfer performance for the TM23 Series. A high margin is used for CAT standard values.. Permanent Links Permanent Link PSACR Main unit Horizontal cable 9 m TM23R-MPP24 TM23R-T1 Permanent link adapter (PM) Main unit Channel link adapter Remote unit Remote unit Attenuation/PSNEXT (db) CAT PSNEXT standard value 3 1 CAT Attenuation standard value. Channel Links Horizontal cable 9 m Channel Link PSACR Patch cable 2 m. Patch Cable NEXT(dB) TM23R-MPP24 TM23R-T1 Stranded Patch cable wire 3 m 5 m ( :TM23P-88P) Patch Cable 2 m NEXT CAT NEXT standard value Main unit RL(dB) Attenuation/PSNEXT (db) Patch Cable 2 m Channel link adapter CAT PSNEXT standard value CAT Attenuation standard value Remote unit CAT RL standard value Patch Cable 2 m RL 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO ,JAPAN PHONE: , FAX: The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationModular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationDC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More informationMiniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More information75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
More information1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
More informationSep Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
Non-reflective Terminations (BNC) BNC-TM Series BNC-TMP-05(43) BNC-TMJ-05(42) BNC-TMP-05-2(42) BNC-TMJ-05-2(42) BNC-TMP-05-1(41) BNC-TMJ-05-1(41) BNC-TMP-05(75)(40) BNC-TMJ-05(75)(40) BNC-TMP-1(42) Product
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
More informationUltra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationHigh Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More informationPlug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
More informationCoaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationData sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
More information2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationCouplers with Connectors (H Type)
Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic
More informationSECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
More informationI-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationPRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
More informationI-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationData sheet Patch cord Cat.6 A AWG m yellow
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification especially suitable for shielded and unshielded class E A systems fully shielded Cat.6 A patch
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
More information10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationData sheet E-DAT modul 2 port AP Cat.6 A, pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC
More informationSPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
More informationSPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
More informationUSS RF I plug Connector series
DOC. No.: 651-0089-01 Rev.: D Page: 1/10 1. Application This style products are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc, LAN, Mini-PCI,,PDA,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More information0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
More informationData sheet C6 A RJ45 field plug pro
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationMiniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions. pr..2 Copyright 2 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features. Small high density Outer diameters - plugs (max): mm :, and
More informationData sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationQualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
More informationData sheet C6 A modul K 90 jack - keystone style
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: Keystone, 90 cable feed solid,
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationData sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationData sheet. E-DAT modul 3 port AP Cat.6A, pure white. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6A to ISO/IEC
More informationMiniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions.. Features. Small high density Outer diameters - plugs (max): mm :, and positions mm : 2, and positions 2. Simple push-in/ pull-out mating
More informationPRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
More information3 db 90 Card Couplers
3 db 90 Card Couplers HD-M Series HD-0053M3-IH HD-0195M3-DH HD-0195M3-DH-1 HD-0900M3-CH-1 HD-0620M3-EH HD-1700M3-FH HD-3900M3-BH HD-0313M3-FH HD-2100M3-CH HD-1800M3-CH HD-3200M3-BH HD-6150M3-AH Features
More informationQUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s 2M805 Series Connector
QUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation 40-60 Delaware
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
More informationMar07 Rev B
Product Specification Ultraminiature Coax Connector (UMCC) and Cable Assemblies 108-2231 14Mar07 Rev B 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the
More informationQualification Test Report Mini-Universal MATE-N-LOK* Connector
Qualification Test Report Mini-Universal MATE-N-LOK* Connector 501-589 21 May 12 Rev B 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on the Tyco Electronics Mini-Universal MATE-N-LOK* Connectors
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More informationData sheet E-DAT Industry RJ45 field plug insert Cat.6 Class E A
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E A plug to be assembled in the field and mounted in IP67 plug housings of variants
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationData sheet. Connection line M12 plug straight - M12 jack straight drag chain suitable, 8-pole, X-coded 2.0 m. Illustrations
Page 1/7 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable drag chain suitable Cat.6A, 8 pole, X-coded
More informationWIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
More informationData sheet. M12 field plug X-coded, straight. Illustrations P/N MNF881A EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification M12 Cat.6A X-coded plug based on IEC PAS 61076-2-109 and suitable for field assembly
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 14
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14 Title: Part Number: Description: USB3.0 Connector Product Specification GSB34 / GSB35 series Micro Family, Receptacle, SMT, PCB mount Revisions Control
More informationData sheet Connection line M12 jack straight - RJ45 plug straight 4-pole, D-coded 2.0 m
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12-jack to RJ45-plug Ethernet connection line Cat.5, 4-pole, D-coded (IEC
More information242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
More informationPORTE-CLIPS 12 VOIES MQS GENE II MQS MARK II 12-POSITION RECEPTACLE HOUSING. Traduit par le Service Technique le 16 septembre 2002
PORTE-CLIPS 12 VOIES MQS GENE II MQS MARK II 12-POSITION RECEPTACLE HOUSING Product Specification 19 NOV 2001 Rev. 0 Traduit par le Service Technique le 16 septembre 2002 1. SCOPE This specification defines
More informationØ1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
More informationMaximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
More informationData sheet. E-DAT modul Cat.6A 8(8) jack, T568B. Illustrations P/N I-B1 EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
More informationSerial ATA (SATA) Connector
Product 108-51052 Specification PRE: Tay Aik Poh 20 MAY 11 Rev G APP: Leong See Fan DCR No. D20110520030314_706049 Serial ATA (SATA) Connector 1.0 SCOPE This specification covers the requirements for product
More information