1.27mm Pitch Connector
|
|
|
- Jasper French
- 6 years ago
- Views:
Transcription
1 1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment of the mating area in 4-row allows to duplex the number of contacts in the nearly equivalent mount square as for the conventional DIN connector.(refer to photo (1).) 2. High Current and High Voltage Two-thirds of total contact numbers are used for half pitch signaling contact, while the other one-third thereof is used for the power ground contact. Power ground contact corresponds to high current (1A) and high voltage (250V). 3. Sequence Structure Considering insertion/extraction in active power mode and maintenance on the end user side, the FX series is designed in a mechanism that can afford the time different contact at three steps. (For details, refer to Figure (2) as shown on the right.) FX1V (3 step sequence) Sequence Structure (Pin contact sequence) Figure 2 Mating Removal Power Supply Ground Signal 4. Mis-insertion Prevent Provide the insertion guide on both ends of connector, and widen an inductive area in order to prevent mis-insertion. *FX1 Series (2 step sequence) 1 Row B 2 Row A, row C *FX1 Series (3 step sequence) B1 to B4, B45 to B52, B93 to B96 B5 to B44, B53 to B92 Row A, row C Setting row B to ground, if active cable insertion and extraction are performed as power supply, arc will occur between contact and contact. The row B contact structure is constructed to separate arc occurrence point a and normal contact point b, and minimizes affects on the contact. A134
2 Product Specifications Rating Current rating Voltage rating Signal Contact: 0.5A Signal Contact: 125V AC Operating Temperature Range-55 to 85ç (Note 1) Storage Temperature Range -10 to +60ç(Note 2) Power Supply Contact: 1A Power Supply Contact: 250V AC Operating Humidity Range -40 to 80% Operating Humidity Range -40 to 70% (Note 2) Item Specification Condition 1. Insulation Resistance 1000M ohms min. 250V DC 2. Withstanding Voltage No flashover or insulation breakdown. 1 minute Signal contact 300V AC Power supply contact 600V AC 3. Contact Resistance 60m ohms max. (conductor resistance included) 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 70m ohms max. Insulation resistance: 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 70m ohms max. Insulation resistance: 1000M ohms min. (-55ç: 30 minutes 15- to 35ç: 5 minutes max. (-85ç: 30 minutes 15- to 35ç: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating) Contact resistance: 70 m ohms max. 500 cycles Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material FX1 Series Parts Material Finish Remarks Header PPS Insulator Black UL94V-0 Receptacle PPS/ PTB Straight header Brass Contact area:gold plated Contact Right angle header Phosphor bronze Lead area:tin-lead plated Receptacle Phosphor bronze Prefixed pin Phosphor bronze Tin-lead plated FXV Series Insulator Parts Material Finish Remarks Header LCP Black UL94V-0 Receptacle PPS/ PTB Contact Phosphor bronze Contact area:gold plated Lead area:tin-lead plated Prefixed pin Phosphor bronze Tin-lead plated A135
3 Ordering Information FX1 Series FX1 q P DSA L w e r t y q Series Name : FX1 w Number of contacts: 192, 216 e Connector type : P-header : S-receptacle r Contact pitch: 1.27mm t Contact type: DS : Right angle DSA : Straight y L: Board prefixed pin Note: The cleaning type only is applied on the header side to FX1 series. FX1V Series FX1V q A P - DSA L w e r t y q Series Name : FX1V w A: Cleaning type (header side only) Blank: No cleaning type e Number of contacts : 288 r Connector type: P-header S-receptacle t Contact type: DS : Right angle DSA : Straight y L: Board prefixed pin Note 1. Cleaning type: the liquid escape hole is added at dip cleaning. No cleaning type: no liquid escape hole is added at dip cleaning. Note 2. The FX1V series omits the contact pitch. BApplication Pattern A136
4 FX1 Series Receptacle : Right Angle Type BPCB mounting pattern Applicable board thickness t=1.6mm Part Number CL No. Number of Contacts A B FX1-144S-1.27DS FX1-192S-1.27DS FX1-216S-1.27DS FX1-144S-1.27DSL FX1-192S-1.27DSL FX1-216S-1.27DSL C Unit: mm D A137
5 Header : Straight Type BPCB mounting pattern Applicable board thickness t=1.6mm Part Number CL No. Number of Contacts A B FX1-144P-1.27DSA FX1-144P-1.27DSAL FX1-192P-1.27DSA FX1-192P-1.27DSAL FX1-216P-1.27DSA FX1-216P-1.27DSAL Unit: mm C A138
6 Header : Right Angle Type BPCB mounting pattern Applicable board thickness t=1.6mm Part Number CL No. Number of Contacts FX1-144P-1.27DS FX1-144P-1.27DSL A139
7 FX1V Series Receptacle : Right Angle Type BPCB mounting pattern Recommended board thickness t=1.6mm (lead length: 3mm) Part Number FX1V-288S-DS FX1V-288S-DSL CL No Header : Straight Type Liquid escape hole With hole : Cleaning type Without hole : No Cleaning type BPCB mounting pattern Recommended board thickness t=1.6mm (lead length: 3.4mm) Part Number FX1V-288P-DSA FX1V-288P-DSAL FX1VA-288P-DSA FX1VA-288P-DSAL CL No A140
8 BPrecautions 1. Soldering (1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 300ç for 2 seconds max. Please be sure to coat the contacts with solder so that no force is given. (2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260ç for 5 seconds max. 2. Prefixed function If the prefixed function is required, please use to the board prefixed pin type. A141
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
DC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
CAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
USS RF I plug Connector series
DOC. No.: 651-0089-01 Rev.: D Page: 1/10 1. Application This style products are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc, LAN, Mini-PCI,,PDA,
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
PRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
Push-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
High Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
TEST SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND MATE INTERFACE (BMI) (WIRE TO PCB AND WIRE TO WIRE)
SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND (WIRE TO PCB AND WIRE TO WIRE) 1.0 SCOPE This specification covers the 4.20 mm (.165 inch) centerline connector series terminated with 18 to 24
PORTE-CLIPS 12 VOIES MQS GENE II MQS MARK II 12-POSITION RECEPTACLE HOUSING. Traduit par le Service Technique le 16 septembre 2002
PORTE-CLIPS 12 VOIES MQS GENE II MQS MARK II 12-POSITION RECEPTACLE HOUSING Product Specification 19 NOV 2001 Rev. 0 Traduit par le Service Technique le 16 septembre 2002 1. SCOPE This specification defines
INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
Carbon Composition Resistor
Rating and Dimensions Dimensions : Millimetres Power Dimensions L D Lead d Maximum Rated Maximum Overload Dielectric Withstand Tolerance ±(%) R-Value 1/4 W 6.4 ±0.7 2.3 ±0.2 0.6 250 400 500 5 E-24 1/2
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Serial ATA (SATA) Connector
Product 108-51052 Specification PRE: Tay Aik Poh 20 MAY 11 Rev G APP: Leong See Fan DCR No. D20110520030314_706049 Serial ATA (SATA) Connector 1.0 SCOPE This specification covers the requirements for product
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
2mm metric system INTRODUCTION MAIN FEATURES
INTRODUCTION MAIN FEATURE Mini coaxial connectors combine the high performance of coaxial connectors with the convenience, compactness and cost effectiveness of hard metric modules. COAX Excellent electrical
Mar11 Rev J
Product Specification 108-1051 11Mar11 Rev J System, Connector/Header, MTA 156 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) MTA
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3
C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
Qualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
AMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
SMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
Miniature Interface Coaxial Switch, DC to 10 GHz
Miniature Interface Coaxial Switch, DC to 10 GHz MS-162B Series Features 1. Wide frequency range Applicable frequencies range from DC to 10 GHz. 2. Low insertion loss 0.15 db MAX (DC to 2 GHz) 0.2 db MAX
JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.
M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
PRODUCT SPECIFICATION. This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product.
1 of 10 B 1.0 Objective This specification defines the performance, test, quality and reliability requirements of the PwrBlade ULTRA product. 2.0 Scope This specification is applicable to the termination