2.5mm Pitch Connector for Discrete Wire Connection

Size: px
Start display at page:

Download "2.5mm Pitch Connector for Discrete Wire Connection"

Transcription

1 .mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by Protector (ID Type) The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector has a strong tensile strength against the cable and prevents dusts.. Easy Connection by Easy Tool (ID Type) No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector and fastening it with the ID tool.. Intermediate Connection Possible (ID Type) For intermediate connection, the connector allows signal extraction during cabling. [Intermediate Connection] Applications FA equipment, measurement equipment B1

2 Product Specifications Rating Current rating (Note1) Cable Size AWG : A AWG : A AWG : 1A Operating Temperature Range Operating Moisture Range Storage Temperature Range -0 to +ç (Note) -0 to 0% - to +0ç (Note) Voltage rating V AC Storage Moisture Range -0 to 0% (Note) Item Specification Condition 1. Insulation Resistance 00M ohms Min 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC/1 minute. Contact Resistance 0m ohms Max 0mA. Insertor/Extraction Force MIN0.N (gf), MAX.N(0gf) Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1µs or more Frequency: to Hz, single amplitude of mm, hours in each of the directions.. Moisture Resistance Contact resistance: 0m ohms Max Insulation resistance: 00M ohms Min hours at temperature of 0ç and humidity of 0% to %. Temperature Cycle Contact resistance: 0m ohms max.insulation resistance: 00M ohms min. (-ç: 0 minutes 1~ç: to minutes (-ç: 0 minutes 1~ç: to minutes) cycles. Operating Life Contact resistance: 0m ohms max. Tin plating: 0 cycles. Resistance to Soldering heat No deformation of components affecting performance. Flow: ç for seconds Manual soldering: 00ç for seconds Note 1. The rated current will be changed according to cable sizes for use. For the header only, the rating is A. Note : Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Light Brown ULV-0 Crimping Contact Contact Phosphor copper Tin plating ID Socket Insulator Polyamide Light Brown ULV-0 Contact Phosphor copper Tin plating Pin Header Insulator Polyamide Light Brown ULV-0 Contact Phosphor copper Tin plating Note:Hirose's tin-plated products takes measures against whisker. Ordering Information Connector DF1 - * S -. C q w e r t Protector DF1 - * A 1.0 Contact q w e DF1 - SCF q w q Series Name : DF1 t Contact Type w Number of Contact : to 1, C : Crimping socket e Connector Type R : AWG ID socket S: Socket R : AWG ID socket P: Pin Header R : AWG ID socket r Contact Pitch :.mm DSA : Straight dip DS : Right angle dip q Number of Contact : to 1, e Cable Clamp Size w Connector Type A: Discrete wire 1.0: UL0 AWG, 1.: UL0 AWG q Applicable Cable Size w Packaging Type : AWG to SCF : Socket contact, reel SC : Socket contact, bag B1

3 ID Socket (Open End Type) Applicable Cable Applicable Cable Jacket Diameter DF1-*S-.R UL0 AWG(11 pieces/0.1mm) 1. to 1.mm DF1-*S-.R UL0 AWG( pieces/0.1mm) 1. to 1.mm DF1-*S-.R UL0 AWG( pieces/0.1mm) to 1.mm (Tin plated annealing copper wire) AWG Cable Socket Size (Triangle Mark: Green) DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R Note:This convex portion is located ( contacts: the center at one point)( to contacts: as shown in the illustration)(more than contacts: one center at one point added to the above illustration). Number of Contacts A B DF1-S-.R DF1-11S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-S-.R Number of Contacts A B AWG Cable Socket Size (Triangle Mark: Light Blue) DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R AWG Cable Socket Size (Triangle Mark: Red) DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R DF1-S-.R Number of Contacts A B DF1-S-.R DF1-11S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-S-.R Number of Contacts A B DF1-S-.R DF1-11S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-1S-.R DF1-S-.R Number of Contacts A B Number of Contacts A B Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the products per bag. B1

4 Protector Note 1.Product contact No. mark, however and contacts are not indicated. Note.Round hole to distinguish the protector A1.0 and 1. (DF1-*A1.0 only) Select the protector after inspecting the cable jacket diameter for use. Protector Type Applicable Jacket Diameter Recommended Cable DF1-*A1. Ø1. to Ø1. UL0 AWG DF1-*A1.0 Ø to Ø1. UL0 AWG *indicates contact No. AWG Cable Protector Size AWG, Cable Protector Size Number of Contacts A B C Number of Contacts A B C DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1-A1. DF1-11A1. DF1-1A1. DF1-1A1. DF1-1A1. DF1-1A1. DF1-1A1. DF1-A DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1-A1.0 DF1-11A1.0 DF1-1A1.0 DF1-1A1.0 DF1-1A1.0 DF1-1A1.0 DF1-1A1.0 DF1-A Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. B1

5 Crimping Socket Photo: Contact Inserted. Note1:This convex portion is located ( contacts: the center at one point)( to contacts: as shown in the illustration)(more than contacts: one center at one point added to the above illustration). Note.The terminal number indicates all contact numbers. Number of Contacts A B Number of Contacts A B DF1- S-.C DF1- S-.C DF1- S-.C DF1- S-.C DF1- S-.C DF1- S-.C DF1- S-.C DF1- S-.C DF1-S-.C DF1-11S-.C DF1-1S-.C DF1-1S-.C DF1-1S-.C DF1-1S-.C DF1-1S-.C DF1-1S-.C DF1-S-.C Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. Crimping Contact for Socket Packaging Type Number of Contacts Finish DF1-SCF Reel 000 Tin plating DF1-SC Bag ;;; ;;; Ø Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (wire construction) Jacket Diameter AWG (11 cores/0.1mm) AWG ( cores/0.1mm) Ø0. to Ø1.mm AWG (0 cores/1.mm) Note:If other cables are used instead of the applicable cable, contact Hirose sales department. Recommended Cable UL1, UL0 Strip Length 1. to.1mm. BApplicable Crimping Tool Type Applicable Contact Applicator AP-DF1-S 01-- DF1-SCF Press Main Unit CM Manual Crimping Tool DF1-TS 0-0- DF1-SC Extraction Tool DF1-C-PO DF1-SCF Note:If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product. B1

6 Pin Header Right Angle Type +0.1 Board Through-hole Diameter : ø+0 DF1- P-.DS DF1- P-.DS DF1- P-.DS DF1- P-.DS DF1- P-.DS DF1- P-.DS DF1- P-.DS DF1- P-.DS Number of Contacts A B C DF1-11P-.DS DF1-1P-.DS DF1-1P-.DS DF1-1P-.DS DF1-1P-.DS DF1-1P-.DS DF1-1P-.DS DF1-P-.DS DF1-P-.DS Note 1.A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. Note.The socket applicable to the 1 contact connector is only crimping type. Pin Header Straight Type Number of Contacts A B C Board Through-hole Diameter : ø+0 DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA DF1- P-.DSA Number of Contacts A B C DF1-11P-.DSA DF1-1P-.DSA DF1-1P-.DSA DF1-1P-.DSA DF1-1P-.DSA DF1-1P-.DSA DF1-1P-.DSA DF1-P-.DSA DF1-P-.DSA Note 1.A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. Note.The socket applicable to the 1 contacts connector is only crimping type. Number of Contacts A B C B1

7 BDF1 Connection Press Height Width Depth Weight DF1 Connection Press HP mm 0mm mm.kg Note:The intermediate connection can be established by removing the cable cuttingblade of this press machine. Note:Select a protector after inspecting a cable Jacket diameter for use. Protector Type Applicable Jacket Diameter Recommended Cable DF1-*A1. Ø1. to Ø1. UL0 AWG DF1-*A1.0 Ø to Ø1. UL0 AWG, * indicates contact No. DF1 Connection Press HP1 BDF1 Cable Crimper DF1 Cable Crimper Used to install the cable in the protector. DF1 Cable Crimper BPrecautions for Use 1. Recommended Soldering Condition Flow: ç for seconds Manual soldering: 0ç for seconds. Cleaning Condition Refer to Nylon Connector Use Hand book.. Connection Condition [Crimping] Refer to Nylon Connector Use Hand book. [ID] For the insulation displacement tool, set a set of connector per insulation displacement. If more than connectors have been set, they interrupt each other, which will cause an insulation displacement failure. After the insulation displacement, make sure that the locks on both protector sides are completely activated. B1

2.5mm Pitch Connector for Discrete Wire Connection

2.5mm Pitch Connector for Discrete Wire Connection .mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves

More information

2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)

2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) 2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert

More information

5mm Pitch Miniature Potting Connectors for Secondary Power Supply

5mm Pitch Miniature Potting Connectors for Secondary Power Supply 5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is

More information

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line

More information

2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)

2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) 2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement

More information

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

2mm Double-Row Connector (Product Compliant to UL/CSA Standard) 2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple

More information

2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection

2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection .5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner

More information

1.25mm Pitch Miniature Crimping Connector (UL Listed)

1.25mm Pitch Miniature Crimping Connector (UL Listed) 1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight

More information

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile

More information

2.54mm Pitch Bottom Entry Type Connector

2.54mm Pitch Bottom Entry Type Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low

More information

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector 2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

More information

1.27mm Pitch Connector

1.27mm Pitch Connector 1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment

More information

2.54mm Pitch Board to Board Connector

2.54mm Pitch Board to Board Connector 2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.

More information

15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply

15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply 15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.

More information

1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies

1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features

More information

1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies

1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between

More information

2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces

2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces 2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features

More information

1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies

1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies 1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.

More information

DC to 2.5GHz Small Coaxial Switch

DC to 2.5GHz Small Coaxial Switch All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Modular Plug Connectors Compliant to Enhanced Category 5 Standards

Modular Plug Connectors Compliant to Enhanced Category 5 Standards Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B

More information

Small-sized, plastic type, push-pull lock connectors

Small-sized, plastic type, push-pull lock connectors Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved

More information

High Power/Signal Connectors for Industrial Machinery

High Power/Signal Connectors for Industrial Machinery High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)

More information

Modular Plug Connectors Compliant to Enhanced Category 5 Standards

Modular Plug Connectors Compliant to Enhanced Category 5 Standards Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B

More information

0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable

0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable .5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support

More information

High Speed, Matched-Impedance, Parallel Board-to-board Connector System

High Speed, Matched-Impedance, Parallel Board-to-board Connector System NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications

More information

CAT 6 Data Wiring System Connectors

CAT 6 Data Wiring System Connectors NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,

More information

M20 Connectors Specification

M20 Connectors Specification Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical

More information

sealed mini usb connectors

sealed mini usb connectors QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

CAT 6 Data Wiring System Connectors

CAT 6 Data Wiring System Connectors CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded

More information

M22 Connectors Specification

M22 Connectors Specification Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical

More information

Push-on Bayonet Lock Miniature Waterproof Connectors

Push-on Bayonet Lock Miniature Waterproof Connectors Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

SBS Connectors - up to 110 amps

SBS Connectors - up to 110 amps Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.

More information

SB 50 Connectors - up to 120 amps

SB 50 Connectors - up to 120 amps Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

More information

I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable

I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw

More information

SBS Connectors - up to 110 amps

SBS Connectors - up to 110 amps SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact

More information

AVX Wire-to-Board Connectors

AVX Wire-to-Board Connectors AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7 The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting

More information

Spring Loaded Contacts

Spring Loaded Contacts Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors .09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

More information

Standard AWG: WTB

Standard AWG: WTB The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

More information

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF

More information

I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX

I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

More information

45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply

45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply 45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using

More information

Qualification Test Report SlimSeal SSL Connector

Qualification Test Report SlimSeal SSL Connector Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to

More information

Discrete Wire IDC Contact & Cap

Discrete Wire IDC Contact & Cap The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

More information

10+Gbps 0.8mm pitch Board to Board Connectors

10+Gbps 0.8mm pitch Board to Board Connectors NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to

More information

SSL - Discrete Wire IDC Contact & Cap

SSL - Discrete Wire IDC Contact & Cap The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF

More information

2.4mm coaxial connectors for frequency test measurements

2.4mm coaxial connectors for frequency test measurements 2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies

More information

0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections

0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections 0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard

More information

Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size

Operating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features

More information

COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2

COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2 AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection

More information

AMPLIMITE Cable Connectors and Shielding Hardware Kits

AMPLIMITE Cable Connectors and Shielding Hardware Kits AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF

More information

Handling Precaution for Terminal and Connector

Handling Precaution for Terminal and Connector 1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use

More information

10. Mini Coax Connectors

10. Mini Coax Connectors . Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to

More information

45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply

45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply 45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG

More information

D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series

D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash

More information

Powerpole Connectors - PP75: up to 120 Amps

Powerpole Connectors - PP75: up to 120 Amps Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG

More information

Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series

Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height

More information

Setting Standards Connectors M 16

Setting Standards Connectors M 16 Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

More information

WIRE-PRESS SOCKETS (AXW)

WIRE-PRESS SOCKETS (AXW) FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure

More information

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X

Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product

More information

D Subminiature Combo D

D Subminiature Combo D Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2

More information

Powerpole Connectors - PP120: up to 240 Amps

Powerpole Connectors - PP120: up to 240 Amps Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8

More information

Coaxial Line Stretchers

Coaxial Line Stretchers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is

More information

10. Mini Coax Connectors

10. Mini Coax Connectors . Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5

More information

.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES

.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

More information

SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:

SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX: SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete

More information

Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)

More information

YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors

YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors .mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature

More information

Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header

Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple

More information

Modular Jack Connector for High-Speed Transmission

Modular Jack Connector for High-Speed Transmission All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems

More information

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility

More information

OUTLINE FEATURES SPECIFICATIONS MATERIAL/FINISH

OUTLINE FEATURES SPECIFICATIONS MATERIAL/FINISH OUTLINE IP Push-On CM1 series with -D has black trivalent chromium treatment and is a connector which is in compliance with RoHS directive. D type is a small sized waterproof circular connector with push

More information

75 Ω Small Coaxial Connectors (SMT Low Profile)

75 Ω Small Coaxial Connectors (SMT Low Profile) NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,

More information

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order)

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order) The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.

More information

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying

More information