PRODUCT SPECIFICATION

Size: px

Start display at page:

Download "PRODUCT SPECIFICATION"

Anna Greer
5 years ago
Views:

1 Section Table of Contents Page 1.0 Scope Product Description Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board Dimensions, Materials, Platings, Markings Safety Agency Approvals Applicable Documents Specifications Ratings Voltage Applicable Wires Maximum Current Rating (Amperes) 3 Table 3 Maximum Current Rating (Amperes) Wire-To-Wire Wire-To-Board Temperature 3 4. Wave Solder Process Temperature 3.0 Wire-To-Wire Performance 4.1 Electrical Requirements 4.2 Mechanical Requirements 4.3 Environmental Requirements Wire-To-Board Performance Electrical Requirements Mechanical Requirements Environmental Requirements Test Sequences Packaging 9 1 of 9

2 1.0 SCOPE This Product Specification covers performance requirements for the 4.20 mm (.16 inch) centerline (pitch) printed circuit board (PCB) connector series with Tin or Gold plating, The connector series terminated with 16 to 28 AWG wire using Crimp technology with Tin or Gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Table 1 WIRE-TO-WIRE Description Series Number RoHS UL CSA TUV Female Crimp Terminal 6 Yes n/a n/a n/a Receptacle Housing 7 Yes Yes Yes Yes Male Crimp Terminal 8 Yes n/a n/a n/a Plug Housing 9 Yes Yes Yes Yes Table 2 WIRE-TO-BOARD Description Series Number RoHS UL CSA TUV Female Crimp Terminal 6 Yes n/a n/a n/a Receptacle Housing 7 Yes Yes Yes Yes Vertical Header 66 Yes Yes Yes Yes Right Angle Header 69 Yes Yes Yes Yes 2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS See the appropriate sales drawings for the information on dimensions, materials, platings markings. 2.3 SAFETY AGENCY APPROVALS UL File: E29179 CSA Certificate: LR TUV Certificate: R APPLICABLE DOCUMENTS AND SPECIFICATIONS See sales drawings the other sections of this specification for the necessary referenced documents specifications. 2 of 9

3 4.0 RATINGS 4.1 VOLTAGE 600 Volts AC (RMS) (or 600 Volts DC) 4.2 APPLICABLE WIRES Maximum Insulation Diameter Applicable Wire Gauges 16 AWG: 3.10 mm /.122 inches AWG: 3.10 mm /.122 inches AWG: 1.80 mm /.071 inches 4.3 CURRENT RATING (Amperes) Table 3 - CURRENT RATING (Amperes) Wire-to-Wire Wire-to-Board Brass Phosphor Bronze Ckt. Size Ckt. Size 2 & Wire Wire 2 & AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # AWG # Note: PCB trace design may greatly affect temperature rise results in Wire-to-Board Applications. 4.4 TEMPERATURE Operating: * - 40 C to + 10 C Nonoperating: - 40 C to + 10 C *Including 30 C terminal temperature at rated current 4. WAVE SOLDER PROCESS TEMPERATURE Headers with pegs: 240 C Maximum Headers without pegs: 260 C Maximum 3 of 9

4 .0 WIRE-TO-WIRE PERFORMANCE.1 ELECTRICAL REQUIREMENTS Mate connectors: apply a maximum 10 milliohms voltage of 20 mv a current of ma. Wire resistance shall be removed (Low Level) from the measured value Rated Current of Wire Termination (Low Level) Insulation Dielectric Withsting Voltage Temperature Rise (via Current Cycling) Mate connectors: apply a maximum voltage of 20 mv at rated current. Terminate the applicable wire to the terminal measure wire using a voltage of 20 mv a current of 100 ma. Mate connectors: apply a voltage of 00 VDC between adjacent terminals between terminals to ground. Mate connectors: apply a voltage of 100 VAC for 1 minute between adjacent terminals between terminals to ground. Mate connectors. Measure the temperature rise at the rated current after 96 hours, during current cycling (4 minutes ON 1 minutes OFF per hour) for 240 hours, after final 96- hour steady state. 10 milliohms milliohms 1000 Megohms No breakdown. Current leakage < ma Temperature rise: +30 C.2 MECHANICAL REQUIREMENTS 14.7 N (3.30 lbf) Terminal Mate Insert withdraw terminal (male to insertion force 1 female) at a rate of 2 ± 6 mm (1 ± ¼ Unmate Forces inch) per minute. 0. N (0.11 lbf) Per Circuit withdrawal force 2 Crimp Terminal Retention Force (in Housing) 3 Durability Axial pullout force on the terminal in the housing at a rate of 2 ± 6 mm (1 ± ¼ inch) per minute. Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to Environmental Tests. 30 N (6.74 lbf) retention force 4 of 9

5 .2 MECHANICAL REQUIREMENTS (continued) Vibration (Rom) Shock (Mechanical) Wire Pullout Force (Axial) Crimp Terminal Insertion Force (into Housing) Normal Force Panel Insertion Withdrawl Forces Thumblatch Operation Force Thumblatch Yield Strength Mate connectors vibrate per EIA , test condition VII. Mate connectors shock at 0 g's with ½ sine wave (11 milliseconds) shocks in the ±X, ±Y, ±Z axes, (18 shocks total). Apply an axial pullout force on the wire at a rate of 2 ± 6 mm (1 ± ¼ inch). Apply an axial insertion force on the terminal at a rate of 2 ± 6 mm (1 ± ¼ inch). Apply a perpendicular force. Insert withdraw a connector at a rate of 2 ± 6 mm (1 ± ¼ inch) per minute. (Applies only to plugs with panel retention feature) Depress latch at a speed rate of 2 ± 6 mm (1 ± ¼ inch) per minute. Mate loaded connectors fully. Pull connectors apart at a speed rate of 2 ± 6 mm (1 ± ¼ inch) per minute. 10 milliohms (change from initial) Discontinuity < 1 microsecond Discontinuity < 1 microsecond 16 Awg = 88.0 N (19.8 lbf) Min. 18 Awg = 88.0 N (19.8 lbf) Min. 20 Awg = 9.0 N (13.3 lbf) Min. 22 Awg = 39.0 N (8.78 lbf) Min. 24 Awg = 29.0 N (6.2 lbf) Min. 26 Awg = 19.0 N (4.27 lbf) Min. 28 Awg = 9.80 N (2.20 lbf) Min. 1.0 N (3.37 lbf) insertion force 1.47 N (10 grams) Sn 0.49 N (0 grams) Au 22 N (0.7 lbf) insertion force 17 N (3.3 lbf) withdrawl force N (3.7 lbf) 68 N (1.3 lbf) of 9

6 .3 ENVIRONMENTAL REQUIREMENTS 1 Thermal Shock Mate connectors: expose for cycles Between temperatures 10 C; Dwell 0. hours at each temperature. Dielectric Strength per.1. Insulation per Thermal Aging Mate connectors; expose to: 96 hours at 10 ± 2 C 3 Humidity (Steady State) Mate connectors: expose to a temperature of 60 ± 2 C with a relative humidity of 90-9% for 96 hours. Dielectric Strength per.1. Insulation per Cold Mate connectors: Duration: 96 hours; Temperature: -40 ± 3 C Corrosive Atmosphere: Sulfur Dioxide Gas (SO 2 ) Mate connectors: Duration: 24 hours exposure. Atmosphere: 0 parts per million (ppm) SO 2 Gas. Temperature: 40 ± 3 C 6 of 9

7 6.0 WIRE-TO-BOARD PERFORMANCE 6.1 ELECTRICAL REQUIREMENTS ITEM DESCRIPTION TEST CONDITION REQURIEMENT Mate connectors: apply a maximum 10 milliohms voltage of 20 mv a current of ma. Wire resistance shall be removed (Low Level) from the measured value Rated Current of Wire Termination (Low Level) Insulation Dielectric Withsting Voltage Temperature Rise (via Current Cycling) Mate connectors: apply a maximum voltage of 20 mv at rated current. Terminate the applicable wire to the terminal measure wire using a voltage of 20 mv a current of 100 ma. Mate connectors: apply a voltage of 00 VDC between adjacent terminals between terminals to ground. Mate connectors: apply a voltage of 100 VAC for 1 minute between adjacent terminals between terminals to ground. Mate connectors. Measure the temperature rise at the rated current after 96 hours, during current cycling (4 minutes ON 1 minutes OFF per hour) for 240 hours, after final 96- hour steady state. 10 milliohms milliohms 1000 Megohms No breakdown. Current leakage < ma Temperature rise: +30 C 6.2 MECHANICAL REQUIREMENTS 14.7 N (3.30 lbf) Terminal Mate Insert withdraw terminal (male to insertion force 1 female) at a rate of 2 ± 6 mm (1 ± ¼ Unmate Forces inch) per minute. 0. N (0.11 lbf) Per Circuit withdrawal force 2 Crimp Terminal Retention Force (in Housing) 3 Durability Axial pullout force on the terminal in the housing at a rate of 2 ± 6 mm (1 ± ¼ inch) per minute. Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to Environmental Tests. 30 N (6.74 lbf) retention force 7 of 9

8 6.2 MECHANICAL REQUIREMENTS (continued) Vibration (Rom) Shock (Mechanical) Wire Pullout Force (Axial) Crimp Terminal Insertion Force (into Housing) Mate connectors vibrate per EIA , test condition VII. Mate connectors shock at 0 g's with ½ sine wave (11 milliseconds) shocks in the ±X, ±Y, ±Z axes, (18 shocks total). Apply an axial pullout force on the wire at a rate of 2 ± 6 mm (1 ± ¼ inch). Apply an axial insertion force on the terminal at a rate of 2 ± 6 mm (1 ± ¼ inch). 10 milliohms (change from initial) Discontinuity < 1 microsecond Discontinuity < 1 microsecond 16 Awg = 88.0 N (19.8 lbf) Min. 18 Awg = 88.0 N (19.8 lbf) Min. 20 Awg = 9.0 N (13.3 lbf) Min. 22 Awg = 39.0 N (8.78 lbf) Min. 24 Awg = 29.0 N (6.2 lbf) Min. 26 Awg = 19.0 N (4.27 lbf) Min. 28 Awg = 9.80 N (2.20 lbf) Min. 1.0 N (3.37 lbf) insertion force 8 Normal Force Apply a perpendicular force. Sn Au 1.47 N (10 grams) 0.49 N (0 grams) 9 PCB Engagement Separation Forces 10 Pin Retention Force Thumblatch Operation Force Thumblatch Yield Strength Engage separate a connector at a rate of 2 ± 6 mm (1 ± ¼ inch) per minute. (Applies to parts with PCB retention features only) Apply axial push force at the speed rate of 2 ± 3mm/minute. Depress latch at a speed rate of 2 ± 6 mm (1 ± ¼ inch) per minute. Mate loaded connectors fully. Pull connectors apart at a speed rate of 2 ± 6 mm (1 ± ¼ inch) per minute N (11.0 lbf) insertion force 10.0 N (2.24 lbf) withdrawal force 9.81 N (2.20 lbf) RETENTION FORCE N (3.7 lbf) 68 N (1.3 lbf) 8 of 9

9 6.3 ENVIRONMENTAL REQUIREMENTS 1 Thermal Shock Mate connectors: expose for cycles Between temperatures 10 C; Dwell 0. hours at each temperature. Dielectric Strength per 6.1. Insulation per Thermal Aging Mate connectors; expose to: 96 hours at 10 ± 2 C 3 Humidity (Steady State) Mate connectors: expose to a temperature of 60 ± 2 C with a relative humidity of 90-9% for 96 hours. Dielectric Strength per 6.1. Insulation per Solderability Per SMES-12 Solder coverage: 9% (per SMES-12) Solder Dip connector terminals tail in solder: Solder Duration: ± 0. seconds; Solder Temperature: 260 ± C Visual: No Damage to insulator material 6 Cold Mate connectors: Duration; 96 hours; Temperature: -40 ± 3 C 7 Corrosive Atmosphere: Sulfur Dioxide Gas (SO 2 ) Mate connectors: Duration; 24 hours exposure. Atmosphere: 0 parts per million (ppm) SO 2 Gas. Temperature: 40 ± 3 C 7.0 TEST SEQUENCES Testing sequences to be performed in accordance with EIA PACKAGING Parts shall be packaged to protect against damage during hling, transit storage. 9 of 9

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety