QUADRAX CONNECTOR SERIES
|
|
|
- Kelly Small
- 5 years ago
- Views:
Transcription
1 ONNTOR SRIS or Shell Styles MIL-TL-8999/0 & 6
2 THNIL HRTRISTIS SPIITIONS Temperature Rating: -55 to + 5 orrosion: MIL-ST-0 Method 0, Test ondition Shock: MIL-ST-0 Method, Test ondition Vibration: MIL-ST-0 Method 0, Test ondition Thermal Shock: MIL-ST-0 Method 07, Test ondition urability: 500 Mate/Unmate cycles/min. ielectric Withstand Voltage: 50 V Insulation Resistance: MegaOhms min ontact urrent Rating:.0 mps.. max. andwidth: Up to Gigahertz ata Rates: xceeding Gbits/sec ifferential Pair able Impedance: 00 Ohm + 0 Ohm Signal to Shield able Impedance: 50 Ohm + 7 Ohm MTRILS N INISHS MIL-TL-8999 luminum per STM-/ 606-T6 Shells: lectroless Nickel per S MS -607 Insulators: Quadrax ontacts: PT per STM-70 Ultem per STM-505 rass per STM-6, lloy UNS 6000 or eu per STM-96, alloy UNS 700, 700 Gold plate per MIL-TL-50 Type II lass Quadrax contacts are common ground Recommended ackshells: M8509/ (str) M8509/88 (str) M8509/89 (5 w/extender) Smiths onnectors only recommends the use of backshells that avoid tight bending radii or high compressive forces being applied to cables that may upset the high frequency performance of the onnector cable assembly. MIL-TL-8999 Matched impedance +/- 0 ohms for 00 ohm Standardized backshells esigned for ease of assembly quadrax construction ull crimp termination Smiths onnectors offers a complete line of differential Quadrax connectors, contacts, and cable assemblies for high speed thernet, irewire, and ibre hannel applications. ifferential pair quadrax connectors offer superior performance in high speed matched impedance data-on-demand applications. The signal to signal and signal to shield characteristic impedance is maintained throughout the connector pair. Quadrax ontacts Quadrax contacts consist of four center contacts (Quad configuration applications exceeding Gbit/sec) forming two differential pairs within a common ground. These contacts have a low impedance grounding shield and are ideal for thernet 00 ase-t (00 Ohm), irewire (I 9 and 9), US, VI and infiniband. Smiths onnectors offer reverse gender Quadrax contacts to provide a more robust assembly for harsh environment applications. This alternative configuration places the stronger and larger diameter inner socket contacts within the more exposed Quadrax pin contact insulator. The more fragile inner pin contacts are then placed within the Quadrax socket contact insulator minimizing the potential of alignment damage due to mishandling on both sides. With this arrangement, Smiths onnectors offer the most robust high speed Quadrax contacts available today. Testing apabilities Smiths onnectors Quadrax and Twinax interconnects are characterized for testing eye pattern, jitter, skew, and insertion loss on differential pair 00 ohm high speed Gigabit thernet applications with a wide variety of testing protocols. We utilize the gilent 507 port network analyzer to measure the differential pair TR impedance between Twinax connectors, cable assemblies, and quad cable thernet and ibre hannel interconnect systems ensuring the most accurate acquired signal for high speed communications testing. The 507 port network analyzer is capable of highly accurate 00 Ohm differential measurements up to 0 GHz and can measure ye iagrams up to 6 Gbps.
3 RRNGMNT 9-5 MIL-TL-8999/0 P TIL RPTL " X" POL Ø.5 X Ø.05 GROUN (.76) X. 5 (TYP) X Ø.05 X 00 OHM ROMMN P MOUNTING HOL X, 00 ohm PRT NUMR X Y N N 05. P tail terminations are supplied complete with contacts MIL-TL-8999/0 RPTL KYWY X 00 OHM PRT NUMR X Y PRT #. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/ N N MIL-TL-8999/6 PLUG KYWY X SIZ 8, SKT 00 OHM. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N
4 RRNGMNT 7-8 MIL-TL-8999/0 P TIL RPTL X 00 OHM (.76) Ø.5 X Ø.05 GROUN X. ±.00 X ±.00 X.0 5 (TYP) X Ø.05. ±.00 X Ø.09 X SIZ 8 ROMMN P MOUNTING HOL X, 00 ohm 7-8 RRNGMNT PRT NUMR X Y N N 80. P tail terminations are supplied complete with contacts MIL-TL-8999/0 RPTL X 00 OHM X KYWY 7-8 RRNGMNT. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N MIL-TL-8999/6 PLUG X KYWY 7-8 RRNGMNT X SIZ 8, SKT 00 OHM. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N
5 RRNGMNT 9- MIL-TL-8999/0 P TIL RPTL X 00 OHM (.76) 9- RRNGMNT 5 (TYP). P tail terminations are supplied complete with contacts. Ø.5 X Ø.05 GROUN X. X Ø.05 ROMMN P MOUNTING HOL X, 00 Ohm (connector front side view) ±.00 X ±.00 X Ø.09 X SIZ 8 (connector rear side view) ±.00 X.0 PRT NUMR X Y N N MIL-TL-8999/0 RPTL X 00 OHM X KYWY 9- RRNGMNT PRT NUMR X Y PRT #. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/ N N MIL-TL-8999/6 PLUG X KYWY 9- RRNGMNT X SIZ 8, SKT 00 OHM PRT NUMR X Y PRT #. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/ N N
6 RRNGMNT -6 MIL-TL-8999/0 P TIL RPTL 6X 0 OHM (.76) 5 (TYP) Ø.5 X Ø.05 GROUN X. X Ø.05 ROMMN P MOUNTING HOL 6X, 00 ohm (connector front side view) ±.00 X ±.00 X Ø.09 6X SIZ 8 (connector rear side view) ±.00 X.0-6 RRNGMNT. P tail terminations are supplied complete with contacts. PRT NUMR X Y N N MIL-TL-8999/0 RPTL 6X 00 OHM 6X KYWY -6 RRNGMNT. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N MIL-TL-8999/6 PLUG 6X KYWY 'X" POL 6X SIZ 8, SKT 00 OHM -6 RRNGMNT. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N
7 RRNGMNT 5-8 MIL-TL-8999/0 P TIL RPTL 8X 00 OHM (.76) G H Ø.5 X Ø.05 GROUN X.0 ±.00 5 X.. 5 (TYP) X Ø.05 ROMMN P MOUNTING HOL 8X, 00 ohm (connector front side view). 8X SIZ 8 QUR (connector rear sid 5-8 RRNGMNT PR MIL-ST-560. P tail terminations are supplied complete with contacts. PRT NUMR X Y N N MIL-TL-8999/0 RPTL 8X 00 OHM G H 8X KYWY 5-8 RRNGMNT PR MIL-ST-560 PRT NUMR X Y PRT #. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/ N N MIL-TL-8999/6 PLUG 8X KYWY H G 8X SIZ 8, SKT 00 OHM 5-8 RRNGMNT PR MIL-ST-560. onnectors with cable terminations are supplied without contacts.. Removable Size 8 contacts use removal tool M8969/- PRT NUMR X Y PRT # N N
8 INSRT RRNGMNTS RRNGMNT 7-8 P TIL SYM ONTT LOTION SYM -Y +X.87 ONNTOR RONT SI VIW ontact X xis Y xis ontact X xis Y xis X-xis locations show places. Y-xis locations show places RRNGMNT SYM.80 +X L SYM.80 -Y.80 ONNTOR RONT SI VIW ontact X xis ONTT LOTION Y xis ontact X xis Y xis X-xis locations show places. Y-xis locations show places 8
9 RPTL INSRTS RRNGMNT -6.7 SYM SYM.6 +X..95 -Y. ONNTOR RONT SI VIW ontact X xis Y xis ontact ONTT LOTION X xis Y xis ontact X xis Y xis X-xis locations show places. Y-xis locations show places 9
10 RPTL INSRTS RRNGMNT 5-8. SYM G H +X Y.85 ONNTOR RONT SI VIW ontact G X xis Y xis ontact ONTT LOTION X xis Y xis ontact X xis Y xis H X-xis locations show places. Y-xis locations show places 0
11 SIZ 8 ONTTS SIZ 8 SOKT KY KY. HX TR RIMP SHRINK SLV PRT NUMR L TYP onsult factory for assembly instructions I-6 SIZ 8 PIN KY KY SHRINK SLV PRT NUMR L TYP onsult factory for assembly instructions I-6 IRNTIL L Quadrax contacts are designed to be used with cables of the following mechanical characteristics and haracteristic Impedance:. onductor: Ø.05 NOM. WG, 9/6 WG, silver-coated copper wire. ielectric: xtruded expanded PT Ø.05 NOM spiral-wrapped & fused PT tape. iller: Ø.0 NOM. P RO. inder: PT tape 5. Shield : Tin-coated copper flat braid 6. Shield : Tin-coated copper round braid 7. Jacket: Ø extruded P, color translucent yellow 8. Impedance: Ohms (measured differentially)
12 SMITHS ONNTORS GLOL SUPPORT MRIS UROP SI osta Mesa, Hudson, M Kansas ity, KS rance Germany Italy United Kingdom Shanghai, hina Suzhou, hina Singapore visit us at smithsconnectors.com opyright 06 Smiths onnectors ll rights reserved Version.
high speed RACk & PANeL connectors
high speed Rk & PNeL connectors technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test ondition shock: MIL-STD-0 Method, Test ondition Vibration:
QUADSPLITTER AND IN-LINE QUADSPLITTER
QUADSPLITTER AND IN-LINE QUADSPLITTER technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test Condition B shock: MIL-STD-0 Method, Test Condition
QUADRAX /TWINAX CONNECTOR SERIES. MIL-DTL Style Connectors
QUADRAX /TWINAX CONNECTOR SERIES MIL-DTL-8999 Style Connectors QUADRAX AND TWINAX CONNECTORS MIL-DTL-8999 Twinax/Quadrax Plug 0.56 0. 0.85 0.05 Shell Size B Dia. +.008 -.0 K Max S Dia. Max Z Max 9 0.7
FILTER RACK & PANEL. connectors
FILTER RACK & PANEL connectors table of contents ARINC 404...3 Layouts...3 Shell Sizes 1-4...4 How to order...5 ARINC 600...6 Layouts...6 Shell Sizes 1-3....7 How to order...9 MIL-DTL-83527...9 Layouts...9
Amphenol Aerospace. D38999 Series III Groundplane Connector with Quadrax PCB Sockets Installed
mphenol erospace Size 8 igh Speed Quadrax and ifferential Twinax ontacts or use in IL-TL-38999 Subminiature ylindrical and rinc 600 Rectangular onnectors. Quadrax contacts consist of an outer contact with
FOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
Ethernet & High Speed Networks. Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646
Ethernet & High Speed Networks Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646 Quadrax Contact Presentation Today s technology for Aeronautic and Military equipment is more and more complex,
FCDB (Fibre-Channel Data Bus) & Ruggedized High Speed Solutions
FCDB (Fibre-Channel Data Bus) & Ruggedized High Speed Solutions Souriau Solutions Souriau offers a complete ruggedized cabling solutions for pointto point, featuring Fibre-Channel technology with the FCDB
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
High-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
Series 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
HYPERGRIP connector SeRIeS
HYPERGRIP connector SeRIeS High Reliability Medical Connectors HYPERBOLOID TECHNOLOGY Smiths Connectors offers an extensive range of superior contact technologies suitable for standard and custom solutions.
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
FIBRE CHANNEL CONNECTORS
HIGH SPEED INTERCONNECTS FIBRE CHANNEL/ETHERNET/FIREWIRE FIBRE CHANNEL CONNECTORS 7550 Gillette Avenue, Irvine, California 964 www.sabritec.com Telephone (949) 50-44 Fax (949) 50-009 57 HIGH SPEED INTERCONNECT
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
TECHNICAL CHARACTERISTICS TV-CTV CONNECTORS (MIL-DTL SERIES III/EN3645)
V-V OOS (-- SS /) -- series connectors connectors edicated to harsh environment applications shell sizes (from 0 to ) hread coupling 00% scoop-proof ore than 0 contact arrangements ntermountable with --
D Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
DETAIL SPECIFICATION SHEET SHELL, ELECTRICAL, CONNECTOR, PLUG, RECTANGULAR, POLARIZING
INH-POUN 28 October 2013 SUPSIN 7 March 2013 TIL SPIITION SHT SHLL, LTIL, ONNTO, PLU, TNUL, POLIZIN This specification is approved for use by all epartments and gencies of the epartment of efense. The
D Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
Glenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications
General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
MIL Based RF Coaxial Cable Sets, DC-18 GHz, M F05 Series
MI-38999 ased R oaxial able Sets, -18 z, M 05 Series void Multiple oaxial ables Quick ssemble/isassemble 38999 more rugged than SM, N TURS, MI ST MTRIS MI-38999 Series III connectors are QP listed from
New Split-Pair Quadrax Contacts & Cable Assemblies for MIL-DTL-38999, Series III Cylindricals
all 800-678-0 mphenol erospace offers the high performance interconnect solution for 6 type cable. & I: Overall higher bandwidth than standard 5 quadrax-upports up to 6.5 bps per pair nhanced crosstalk
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
78-Way D-type Connector Accessories
-Way D-type onnector Accessories 0-00D y Standard Voltage to V A/0V, A y Mating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed ompatibility The Standard Voltage -Way D-Type
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
Lightning Series Mil-Dtl Fiber Optic Transceiver, RS-485 DC to 1.0MHz Applications, Multimode, 850nM Quad Port, Jam-Nut Receptacle
Lightning Series Mil-Dtl-38999 Fiber Optic Transceiver, RS-485 DC to 1.0MHz pplications, Multimode, 850nM Quad Port, Jam-Nut Receptacle FTURS Suitable for RS-485 datalinks at datarates from DC to 1.0MHz
LTE high-performance coaxial cables (RG replacement)
LTE high-performance coaxial cables (RG replacement) Center Conductor: See table below. Dielectric: LTE (extruded low-density PTFE) or low density / composite. Inner Shield: 875-892: None. 900-142: Flat
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
SERIES 85 RF, MICROWAVE AND DATALINK CONTACTS
SERIES 5 RF, MICROWAVE AND DATALINK CONTACTS for MIL-DTL-999, Series SuperNine, Series 0 Mighty Mouse, and Series 9 Micro-Crimp connectors APRIL 06 High Speed High Reliability High Availability No more
Microcoaxial Cable Assembly for High-speed Transmission in Cellular Phones
Microcoaxial Cable Assembly for High-speed Transmission in Cellular Phones Takashi Matsukawa 1, Masako Ito 1, Korenari Higashi 1, Tomoyuki Shinohara 1 and Yasushi Nakagawa 2 In recent years, cellular phones
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
TABLE OF CONTENTS. Sliver Cable Assemblies. TE Connectivity Technical Datasheet
TABLE OF CONTENTS Introduction... 2 Description... 2 Features and Benefits... 2 Product Applications... 2 Industry Standards... 2 Technical Documents... 2 Part Numbers... 3 Table 1. Part Number Selection
High-Speed Contacts Product Guide
16-S-1 igh-speed ontacts roduct uide OR I-S OTTS, OTORS, SSIS Online ontact uide Try the Online ontact uide at www.amphenol-aerospace.com I RT UR RWI ST! ST OTT: rom a drop down list 1. 2. RROW YOUR SR:
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
RF COAXIAL CONNECTORS
RF COAXIAL CONNECTORS 17550 Gillette Avenue, Irvine, California 92614 www.sabritec.com Telephone (949) 250-1244 Fax (949) 250-1009 157 CoAXIAL CONNECTORS SCX Coaxial INTRODUCTION Sabritec offers a complete
Low Profile R/A type Board to Cable connector (SGC and Discrete wire)
Low Profile R/ type oard to able connector (S and iscrete wire) Height at mating with vertical receptacle and Right ngle plug is 4.mm PTNT PNIN PL SRIS able assembly by blanket soldering with different
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Maverick Series Gigabit Ethernet, External TFOCA II *, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm
Maverick Series Gigabit Ethernet, External TFOCA II *, 000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Single Port, Flange Receptacles FEATURES Compliant with IEEE-802.:2005 Gigabit Ethernet Optical
USS RF I plug Connector series
DOC. No.: 651-0089-01 Rev.: D Page: 1/10 1. Application This style products are designed for Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS, electronic measuring instruments, etc, LAN, Mini-PCI,,PDA,
DS [20] Absolute position, rotary Electric Encoder
![DS [20] Absolute position, rotary Electric Encoder](/thumbs/81/82762463.jpg "DS [20] Absolute position, rotary Electric Encoder")
S-58--7-, July 6 S-58- [] bsolute position, rotary lectric ncoder The S-58 is a member of the S series of lectric ncoders, based on Netzer Precision proprietary technology. The lectric ncoder offers many
HYPERGRIP CONNECTOR SERIES
HYPRGRIP CONNCTOR SRIS High Reliability Medical Connectors TCHNICAL CHARACTRISTICS SPCIICATIONS Number of Contacts: HG0: 5, HG2: 12, HG3: 19, HG4: 33 HG6: 80 Termination Style: Crimp Contact Diameter:
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
Contacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
Miniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
SPACEWIRE CABLE AND CONNECTOR VARIATIONS
SPACEWIRE CABLE AND CONNECTOR VARIATIONS Shaune S. Allen NASA Goddard Space Flight Center, Greenbelt, MD, 20771 E-mail: Shaune.S.Allen@nasa.gov Page 1 SpaceWire Connector Issues Connector Specification
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency
9-Pin D-type Connection Accessories
-Pin D-type onnection Accessories 0-00D y Standard Voltage and alibration Port Solutions y Standard Voltage to 0V A/00V, A y ating onnectors y onnector Hoods y onnector Blocks y able Assemblies y Guaranteed
High Frequency Contacts
mphenol igh requency ontacts OTRI TWIX TRIX IRTI TWIX QURX OXI TWIX P TI T O OTTS Table of ontents....................... 365 Overview of mphenol s igh requency ontacts........ 366-370 able Systems........................
IT - ITS - ITS-RG - ITZ Connectors
CONNECTOR CONTCTS Series Presentation Contacts in this chapter can be used for the following circular connector series: IT, ITZ, ITS and ITS RG. Threaded IT series have been designed to be fully conform
Tru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
Hi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
369 Series Connectors
KEY FEATURES 3, 6 and 9 way configurations Based on existing ARINC 809 / EN4165 Composite materials Robust design Fully sealed cable and mating interface Mounting of inline with cable-tie Button latching
EMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
TRUtest Specifications. Electrical. Mechanical. Environmental. Requirement. Detail. 1.35:1 maximum. 0.4 db/ft GHz
TRUtest Series TRUtest Series cable assemblies combine MIL-standard test-grade interfaces with flexible and durable cable construction to provide repeatable, reliable performance and long service life.
JDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
Sunridge MCF Series 2.0mm Mated Height Miniature Coaxial Interconnect
Sunridge MCF series coaxial product fulfills the rigorous requirements of high frequency RF signal transmission in digital world. In a miniature form factor of 3.0mm x 3.0mm PCB foot print by 2.0mm mated
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR
C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A
both pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
A B C D E F G H J K L M N P Q
icro- Specifications IX onnector Shell, etal onnector Shell, lastic Terminal lock, ( & S) Interfacial Seal in ontact (Twistin) Socket ontact ncapsulant (otting) ackscrews, ackposts, loat ounts igtail Wire,
ABCIRP Signal/High Speed Data Connector
ABCIRP ignal/high peed Modular Bayonet Lock Connector, Plastic Insulator, Multi-pole signal contacts. Traction & Industrial Mil-DTL-515 & VG95234 tyle Reverse Bayonet Connector Low fire hazard materials
BNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**
N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
CABLE GROUPS. For a more complete listing of cable groups, please refer to pages FIG. 2 RFN-1001-S
- 50 Ohm ELETRIAL SEIFIATIOS Impedance: 50 ohms Working voltage rating: 1,000 VRMS @ sea level Frequency range: 0-11 GHz MEHAIAL SEIFIATIOS Mating: 5/8-24 threaded coupling Interface: MIL-STD-348, Section
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Aerospace. Amphenol. Amphenol High Frequency Contacts for Multi-pin Connectors
mphenol igh requency ontacts f Multi-pin onnects 12-130-4 I PRORM OTORS OTTS PROVI SUR, RI T TRSMISSIO OTRI TWIX OXI TRIX IRTI TWIX TWIX P TI QURX OTTS. IRTI TWIX OTTS.TRSITIO PTRS mphenol erospace MPO
Aerospace. Amphenol. Amphenol High Frequency Contacts for Multi-pin Connectors
mphenol igh requency ontacts f Multi-pin onnects 12-130-4 I PRORMN ONNTORS N ONTTS PROVI SUR, RI T TRNSMISSION ONNTRI TWINX OXI TRIX IRNTI TWINX TWINX P TI QURX ONTTS. IRNTI TWINX ONTTS.TRNSITION PTRS
ADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
Contacts M39029 and Glenair signature solutions MIL-DTL Series III type
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated
Miniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
kwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
RF Microwave Standard Assemblies
RF Microwave Standard Assemblies RF Microwave Standard Assemblies 146 Q-Flex Series Specifications Q-Flex assemblies are a unique ALTERNATIVE to custom designed flexible coaxial cables.traditionally custom
MIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
TNC Connectors. General Description. TNC Configurations. TNC Specifications* Plug Interface** Jack Interface**
TN onnectors General Description Delta TN connectors are compact, 50 Ω impedance connectors with 7 16-28 threaded coupling, similar in size to N connectors but with better electrical characteristics. They
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Pin Contacts Military Part Number. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp Glenair Part Glenair Part 22 22-28 AWG M39029/107-620 850-007-22-620 M39029/106-614 850-006-22-614 20 20-24
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
MMA MMA CANADA. Multi - Compact Blind Mate Modular - Infinite possibilities ARINC Contact - Proven Design FILTERED AND RECTANGULAR CONNECTORS
ILTRD ND RTNGULR ONNTORS Multi Multi - ompact Blind Mate Modular - Infinite possibilities RIN ontact - Proven Design MILITRY & ROSP ND To verify that this certificate is current, please refer to the SI
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
POST REFLOW HEIGHT DIMENSIONS
MEDER electronic RM Series 4 input / 2 output DESRIPTION The RM05-4A-S-4/2 and RM05-2A2B-S-4/2 are low-profile 4 input / 2 output Relay Modules with an FR-4 substrate and rugged thermoset epoxy overmold.
Coaxial Line Stretchers
Coaxial Line Stretchers Frequency range (Note) Maximum Input NOTE: The frequency range will depend on the model. 1.Vibration 2.Shock DC to 10.0 GHz 50 W These coaxial line stretchers maintain an impedance
CDNBS08-SLVU Low Capacitance TVS Array
*RoHS OMPLINT eatures RoHS compliant* Protects up to four I/O ports Surge protection S protection Low capacitance: 6 p pplications thernet - 1/1 ase T Personal digital assistants LN devices Instrumentation
Clear & Clean Display Graphics. Greg Young
Clear & Clean Display Graphics Greg Young greg.young@ipex-us.com SGC vs. Discrete TP: Provide a 2.7Gb/s Data Transfer Performance Comparison between Discrete Twisted Pair #34 Wire Construction and SGC40