ABCIRP Signal/High Speed Data Connector

Transcription

1 ABCIRP ignal/high peed Modular Bayonet Lock Connector, Plastic Insulator, Multi-pole signal contacts. Traction & Industrial Mil-DTL-515 & VG95234 tyle Reverse Bayonet Connector Low fire hazard materials The ignal/high peed is based on the ABCIRP bayonet lock connector. They feature a low fire hazard thermoplastic insulator, which is removable for repositioning at an alternative orientation. There are 4 styles of multi-pole contact available Co-ax, Twin-ax, Tri-ax & Quadrax. The unique contact design allows for simple and robust termination to multi-core. The contacts can be mixed within the same insulator to provide many different combinations of wire termination. Connector sealing features a stepped wire sealing grommet, which provides a water tight seal to the cables. Crimp tooling is industry standard and the contacts are sandwiched between two plastic insulators removing the need for insertion and extraction tooling. tandard Materials & Finishes hell: Insulators: Contacts: Aluminium alloy, Cadmium free plated, black passivation Low fire hazard thermo plastic Copper Alloy, gold plated. Co-ax, Twin-ax, Tri-ax, Quadrax Mechanical Features Coupling: Three pin Bayonet Lock Polarisation: hell key/keyway in removable insulator Contact type: Crimp, multi-pole signal, andwich retention Contact Arrangements: 1 to 7 way Endurance: Minimum 2 mating/unmating operations in any connector hock & Vibration: BEN61373 Cat 1. Class A. Contact Retention: Minimum 2N Electrical Data Voltage Proof: 5v DC/AC peak Contact Resistance: <5m ohms, less than 1 ohms after conditioning Dielectric withstanding voltage: ea level = 5 Vrms between signal contacts and signal contact/body Insulation Resistance: at ambient temperature >5m ohms, at high temperature >1m ohms uitable for data 1 Base-Tx on Cat 5e: ingle Quadrax uitable for data 1 Base-T on Cat 5e: 2 x Quadrax Environmental Features Temperature Rating: -55 C to +5 C ealing: IP67 alt pray: 5hrs in a sealed connector Contact Arrangements The diagram shows quadrax contacts but theses can be substituted for any combination multi-pole contact. 18M3 28M4 M2 4M1 Telephone: +44 () Facsimile: +44 () sales:ttabconnectors.com Website: Issue

2 ignal High peed Quadrax test results for 1 Wire Map (Ethernet Two-Pair) PA Worst Case Margin Worst Case Value Worst Pair NEXT () Freq. (MHz) Limit () Patch Cable BAD or Patch Cable 287 too 6 ft short Length (ft), Limit 328 [Pair ] 286 Prop. Delay (ns) [Pair ] 44 Delay kew (ns) [Pair ] 18 Resistance (ohms) [Pair ] 14.1 Impedance (ohms) [Pair ] 1 Insertion Loss Margin () [Pair ] 1.1 Frequency (MHz) [Pair ] 1. Limit () [Pair ] NEXT Frequency (MHz) 1 6 Insertion Loss Frequency (MHz) Remote Frequency (MHz) 1 Worst Pair RL () Freq. (MHz) Limit () Compliant Network tandards: 1BAE-T 1BAE-TX RL 6 Frequency (MHz) 1 Remote 6 Frequency (MHz) 1 Quadrax test results for 1 Wire Map (T568B) PA Worst Case Margin Worst Case Value Worst Pair NEXT () Freq. (MHz) Limit () Patch Cable BAD or Patch Cable 287 too 6 ft short Length (ft), Limit 328 [Pair ] 286 Prop. Delay (ns), Limit Delay kew (ns), Limit 5 18 Resistance (ohms) [Pair ] 14.4 Impedance (ohms) [Pair ] 1 Insertion Loss Margin () [Pair ].5 Frequency (MHz) [Pair ] 1. Limit () [Pair ] NEXT Frequency (MHz) 1 6 Insertion Loss Frequency (MHz) Remote Frequency (MHz) 1 Worst Pair ACR-F () Freq. (MHz) Limit () Worst Pair P ACR-F () Freq. (MHz) Limit () Worst Pair 45 RL () Freq. (MHz) Limit () Compliant Network tandards: 1BAE-T 1BAE-TX 1BAE-T4 1BAE-T ATM-25 ATM-51 ATM-155 1VG-AnyLan TR-4 TR-16 Active TR-16 Passive ACR-F Frequency (MHz) 1 RL 6 Frequency (MHz) 1 Remote Frequency (MHz) 1 Remote 6 Frequency (MHz) 1 Telephone: +44 () Facsimile: +44 () sales@ttabconnectors.com Website: Issue

3 ignal High peed Crimped Contact Assemblies Part Number Key NOTE: Crimp anvil adapter for use on Quadrax and Twinax assemblies only. Pin Contact ocket Contact Coax Assembly Part Number Key Coax ocket and Pin Variation Table Part Number Impedence (OHM) Cable Type ABMP C # 1 5 LMR currently supply the contact as variant 1 suitable for the cable stated. For ant other impedence or cable variation, please consult the factory for details. Telephone: +44 () Facsimile: +44 () sales@ttabconnectors.com Website: Issue

4 ignal High peed Panel mounted receptacle can be used for front or rear mounting ABCIRP**/** imum panel thickness when using cap head screws. When using countersunk screws, maximum panel thickness = 7.5mm. hell ize ØF Thread Class 2A B C Ød1 +,2- Threaded Holes (MOD CODE M6) E ØG H P see note Om Min Overlap Mated 18 1 x 2 UNEF M /8 x 18 UNEF /16 x 16 UN M /16 x 16 UN Plug connector (style T less accessories) PART NUMBER ABCIRPE6T**** All plug connectors are EMI/RFI versions. hell ize C E ØF Thread Class 2A x 2 UNEF /8 x 18 UNEF /16 x 16 UN /16 x 16 UN.5 ØG H Om Min Overlap Mated Telephone: +44 () Facsimile: +44 () sales@ttabconnectors.com Website: Issue

5 ignal High peed Example of how a complete connector part number is generated from sub-assemblies Basic eries: ABCIRP 3 T 28M4 G P M** VO * hell style: 3 : 4 hole square flange (pg 2). E6 : plug with RFI grounding (pg 2). Refer to ABCIRP catalogue for shell options. Accessory type: T : no accessory. Refer to ABCIRP catalogue for other options. Insert Arrangement 18M3, 28M4, M2, 4M1. (ee images below). Grommet: BLANK : no grommet. G : grommet. Contact Type: P : Pin. : ocket. Modification code: BLANK : standard. M** : consult factory for details. VO: VO : without contacts. (Contacts to be chosen separately) Insulator Orientation: N : normal. W, X, Y, Z : alternative orientations. Multipole Insert Number Key 18M3 28M4 M2 4M1 Typical part numbers for connector: Without Accs. - ABCIRP/E6/T/28M4//VO/N Without Contacts - ABCIRP/3/T/18M3/P/VO/N Multipole inserts are not NCF Approved. Telephone: +44 () Facsimile: +44 () sales@ttabconnectors.com Website: Issue

6 ignal High peed About TT electronics Ltd is a recognised world leader in interconnection systems and harness design test and manufacture for the toughest environmental conditions. With a commitment to a structured new product introduction process, is investing in research and development of new materials and processes, surface treatments and the very latest manufacturing technology and techniques to ensure its products meet the most exacting standards encountered in the transportation, military, and aerospace markets. Quality systems and approvals include IO91 and IO141 along with a variety of product and market sector approvals including the military Mil-std 79. About is a focused, global electronics group supplying leading manufacturers in the defence, aerospace, medical, transportation and industrial markets. The Group consists of five divisions: Components, ensors, ecure Power, Integrated Manufacturing ervices and General Industrial each delivering technology, products and services to customers in target markets worldwide. operates from headquarters based in Weybridge, urrey, with more than 2 global manufacturing locations and more than 6, employees worldwide. Additional information is available from our corporate website: Telephone: +44 () Facsimile: +44 () sales@ttabconnectors.com Website: Issue