Test report number CRT-001b Project number CRT-001b
|
|
- Cory Bell
- 5 years ago
- Views:
Transcription
1 3933 US Route 11 Cortland, NY 13 Telephone: (7) Facsimile: (7) July 24, 215 Nexans Cabling Solutions Alsembergsesteenweg 2, b3 B-151 Buizingen BELGIUM Test report number CRT-1b Project number TEST: CRT-1b Electrical performance testing of a cabling configuration to the standard requirements of ISO/IEC 111 for Class E A permanent link. STANDARD USED: ISO/IEC 111 Information Technology - Generic cabling for customer premises, Edition 2.2, dated June 211. SECTIONS USED: Annex A, Balanced permanent link and CP link performance of ISO/IEC 111 AUTHORIZATION: The project was authorized by Ms. Nancy Declerck, representing the client, Nexans Cabling Solutions, with signed quotation number 525. SAMPLE DESCRIPTION: The client supplied a 3-connector permanent link as illustrated below. The samples were received on July 1, 215 and were production samples in undamaged condition. Component Id Manufacturer Description Part number 1, 3 Nexans LANmark-6A Evo Snap-In N42.66A Connector Cat 6A Screened 2 Nexans LANmark-7A S/FTP 23 AWG Cat 7A N1.372 LSZH 4 Nexans LANmark-7A Patch Cord GG 8C N11.23AOO Cat 7A Screened LSZH 5 Nexans LANmark-6A Evo Snap-In Connector Cat 6A Screened Stranded Wire N42.67A Page 1 of 2 This report is for the exclusive use of Intertek s Client and is provided pursuant to the agreement between Intertek and its Client. Intertek s responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only the sample tested. This report by itself does not imply that the material, product or service is or has ever been under an Intertek certification program. Intertek Testing Services NA, Inc.
2 Test report number CRT-1b July 24, 215 EQUIPMENT LIST: The following equipment was employed in conducting the tests. Equipment used Model number Control number Calibration date Calibration due date Fluke Networks Cable Analyzer DTX-1 N /31/214 12/31/215 Keysight Network Analyzer 83E E366R 3/2/215 3/17/216 Temperature humidity meter OM-EL-USB-2-LCD H243 1/22/215 1/22/216 DATE OF TEST: July 6, 215 through July 21, 215 TEST REPORT REVISION HISTORY: First Issue: July 24, 215 Original document RESULTS: See appendixes A and B for the test results. CONCLUSION: The 3-connector permanent link, as previously described and supplied by the client, was tested in accordance with the standard referred to on page 1, and did comply with the indicated applicable transmission requirements. The PSANEXT and PSAACRF requirements are met, based on the coupling attenuation margin specified in clause A of ISO/IEC 111. The testing was performed at Intertek located in Cortland, New York. The procedures and requirements were taken from the standard referred to on page 1. Reviewed and Approved By: Antoine Pelletier Project Engineer Global Cabling Products Testing John Cash Associate Engineer Global Cabling Products Testing Page 2 of 2 Intertek Testing Services NA, Inc.
3 Test report number CRT-1b July 24, 215 Appendix A Test results This appendix contains 1 page. Intertek Testing Services NA, Inc.
4 Cable ID: CRT-1B Test Summary: Date / Time: 7/6/215 7:4:13 AM Operator: Your Name Model: DTX-1 Headroom 4.6 (NEXT 36-) Software Version: 2.77 Main S/N: Test Limit: ISO111 PL3 Class Ea Limits Version: 1.9 Remote S/N: 931 Cable Type: Cat 7A S/FTP NVP: 76. Main Adapter: DTX-PLA2 Calibration Date: 12/31/214 Remote Adapter: DTX-PLA2 Length (ft) [Pair 12] 269 Prop. Delay (ns), Limit 498 [Pair 36] 367 Delay Skew (ns), Limit 44 [Pair 36] 7 Resistance (ohms), Limit 21. [Pair 12] 12.8 Insertion Loss Margin () [Pair 36] 2.3 Frequency () [Pair 36] 5. Limit () [Pair 36] 42.1 Worst Case Margin Worst Case Value MAIN SR MAIN SR Worst Pair NEXT () Freq. () Limit () Worst Pair PS NEXT () Freq. () Limit () MAIN SR MAIN SR Worst Pair ACR-F () Freq. () Limit () Worst Pair PS ACR-F () Freq. () Limit () MAIN SR MAIN SR Worst Pair ACR-N () Freq. () Limit () Worst Pair PS ACR-N () Freq. () Limit () MAIN SR MAIN SR Worst Pair RL () Freq. () Limit () Compliant Network Standards: 1BASE-T 1BASE-TX 1BASE-T4 1BASE-T 1GBASE-T ATM- ATM-51 ATM-1 1VG-AnyLan TR-4 TR-16 Active TR-16 Passive 1 Wire Map (T568B) 2 NEXT () 1 2 ACR-F () ACR-N () RL () 269 ft Insertion Loss () 1 2 Remote () 1 2 Remote () Remote () Remote () LinkWare PC Version 9.3 Project: DEFAULT Untitled1 Site: Client Name
5 Test report number CRT-1b July 24, 215 Appendix B Test results for coupling attenuation This appendix contains 3 pages. Intertek Testing Services NA, Inc.
6 ISO/IEC 111, Class Ea Link CRT-1b Appendix B Coupling Attenuation, Wall outlet jack, Near-End Frequency () Margin () Freq. () Coupling Attenuation, Wall outlet jack, Far-End Margin () Freq. () Frequency () Page 1 of 3
7 ISO/IEC 111, Class Ea Link CRT-1b Appendix B Coupling Attenuation, Telecom room side, Near-End Margin () Freq. () Frequency () Coupling Attenuation, Telecom room side, Far-End Margin () Freq. () Frequency () Page 2 of 3
8 ISO/IEC 111, Class Ea Link CRT-1a Appendix B Coupling Attenuation, Consolidation point jack, Near-End Frequency () Margin () Freq. () Coupling Attenuation, Consolidation point jack, Far-End Frequency () Margin () Freq. () Page 3 of 3
Superiorr Essex. Suite 150
3933 US Route 11 Cortland, NY 1345 Telephone: (67) 753-6711 Facsimile: (67) 758-3659 www.intertek.com March 2, 216 Test Report Number: 1246639CRT-14 Project Number: 1246639 Legrand North America 125 Eugene
More information125 Eugene O Neill Drive 6120 Powers Ferry Road New London, CT Suite 150 Ph (860) Atlanta, GA Fax (860)
3933 US Route 11 Cortland, NY 1345 Telephone: (67) 753-6711 Facsimile: (67) 758-3659 www.intertek.com December 16, 214 Test Report Number: 33592CRT-136 Project Number: 33592 Legrand North America Superior
More information125 Eugene O Neill Drive 6120 Powers Ferry Road New London, CT Suite 150 Ph (860) Atlanta, GA Fax (860)
3933 US Route 11 Cortland, NY 1345 Telephone: (67) 753-6711 Facsimile: (67) 758-3659 www.intertek.com December 16, 214 Test Report Number: 33592CRT-137 Project Number: 33592 Legrand North America Superior
More informationAMP NETCONNECT Category 6 System
AMP NETCONNECT Category 6 System 2 How Did We Get Here? Basic Cabling Structure Component Specifications Link/Channel Specifications Additional Structure Options EIA/TIA TSB36 EIA/TIA 568 TIA/EIA TSB40
More informationTEST REPORT. ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source TEST REPORT Intertek Testing Services NA, Inc. 16015 Shady Falls Road Elmendorf,
More informationDELTA Test Report. Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model. Performed for Sterling
DELTA Test Report TEST Reg. no. 19 Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model Performed for Sterling DANAK-19/16909 Project no.: T213173-01 Page 1
More informationREQUIREMENTS FOR DIRECTIONAL LAMPS, LIGHT EMITTING DIODE LAMPS AND RELATED EQUIPMENT ACCORDING TO THE EC REGULATION 1194/2012
2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com REQUIREMENTS FOR DIRECTIONAL LAMPS, LIGHT EMITTING DIODE LAMPS AND
More informationTEST REPORT. ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source TEST REPORT Self Adhesive Vinyl; ID: panorama Walk & Wall Project No. 101611878SAT-001A
More informationTEST REPORT. DANAK Reg. no. 19. Electrical performance testing of: Connecting Hardware according to IEC
Page 1 of 12 2 Appendices TEST REPORT DANAK Reg. no. 19 DELTA Danish Electronics, Light & Acoustics Venlighedsvej 4 DK-2970 Hørsholm Denmark Tel. (+45) 45 86 77 22 Fax (+45) 45 86 58 98 www.delta.dk Electrical
More informationCTAG:b01ac469edcbee4d9e5f84a83a1962a5 Certificate of Calibration
CTAG:bac69edcbeed9e5f8a8a96a5 Certificate of Calibration Data Type: FOUND-LEFT Certificate No: 859 Instrument Description Manufacturer Model Serial Number Inventory Number CABLE ANALYZER FLUKE NETWORKS
More informationABCIRP Signal/High Speed Data Connector
ABCIRP ignal/high peed Modular Bayonet Lock Connector, Plastic Insulator, Multi-pole signal contacts. Traction & Industrial Mil-DTL-515 & VG95234 tyle Reverse Bayonet Connector Low fire hazard materials
More informationTEST REPORT. ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source TEST REPORT Reward Prefinished Engineered Hardwood Flooring; ID: REW1265PWOV Project
More informationEESTOR INC. TEST REPORT
EESTOR INC. SCOPE OF WORK Performance testing of capacitive samples (Ceramic samples called 361-1, 358-4, 358-5) REPORT NUMBER 103362995DAL-003 ISSUE DATE 29-JAN-2018 REVISION DATE 28-FEB-2018 PAGES 6
More informationTSB-67. Transmission Performance Specifications for Field Testing of UTP Cabling Systems
TSB-67 Transmission Performance Specifications for Field Testing of UTP Cabling Systems Prepared by: ANSI/EIA/TIA PN-3287 Task Group on UTP Link Performance Required Field Test Parameters for TSB-67 Wire
More informationThis is a preview - click here to buy the full publication
ISO/IEC TR 11801-9901 TECHNICAL REPORT Edition 1.0 2014-10 colour inside Information technology Generic cabling for customer premises Part 9901: Guidance for balanced cabling in support of at least 40
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61935-1 Edition 3.0 2009-07 Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as specified in ISO/IEC 11801
More informationTest Report based on DIN EN ISO/IEC 17025:2005
Test Report based on DIN EN ISO/IEC 1725:25 GHMT Type Approval 2 Connector Permanent Link, Copper, Class E according ISO/IEC 1181-1 Ed.1. 217-11 Document-no: P4945b-18-E This Test Report with the measurements
More informationTest Report for: DBA DARE 2B DIFFERENT ENTERPRISES INC.
45000 Helm Street Suite 150 Plymouth Twp., MI 48170 Telephone: 734-582-2900 Facsimile: 734-582-2901 www.intertek.com Test Report for: DBA DARE 2B DIFFERENT ENTERPRISES INC. FIELD OF VIEW TEST One Rear
More informationQualification testing of 100 ohm shielded channel, Class EA. Performed for Tyco Electronics Raychem N.V.
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 19 Qualification testing of 100 ohm shielded channel, Class EA Performed for Tyco Electronics Raychem N.V. DANAK-19J1636 Project
More informationn Proper pin termination at each end n Continuity to the remote end n Shorts between any two or more conductors n Transposed pairs: n Crossed pairs.
INTRODUCTION Structured Cabling or data cabling (also known Local Area Network or LAN Cabling) is increasing in its deployment for business, commercial and residential use to carry signaling for networks
More informationTEST REPORT. Report Number: MPK-007 Project Number: Report Date: August 31, 2007
TEST REPORT Report Number: 3131957MPK-007 Project Number: 3131957 Report Date: August 31, 2007 Testing performed on the Patient Remote Control Model #: SC-5212 FCC ID: Q4D-PSC5210W to FCC Part 15.209 and
More informationField Measurements of Return Loss
Field Measurements of Return Loss White Paper By Mark Johnston and Jim Tonti Microtest October 21, 1998 Page 1 12/15/99 Overview Return loss is an important new measurement used to qualify the performance
More informationCategory 7 A /Class F A Products
CATEGORY 7 A /CLASS F A PRODUCTS Category 7 A /Class F A Products Exceeding ISO/IEC category 7 A /class F A specifications, Siemonʼs fully shielded TERA endto-end cabling solution is the highest-performing,
More informationREPORT 3933 US ROUTE 11, CORTLAND, NEW YORK 13045
FOR THE SCOPE OF. ACCREDITATION UNDER NVLAP LAB CODE 100402-0.. REPORT 3933 US ROUTE 11, CORTLAND, NEW YORK 13045 Project No. G101555841 Date: March 21, 2014 REPORT NO. 101555841CRT-001 TEST OF ONE LED
More informationCOPPER + LWL RAW CABLES
COPPER + LWL RAW Twisted Pair Cables... 112 TV/SAT Cables... 116 Fiber Optic Raw Cables... 120 DIGITUS CAT 7 twisted pair installation cable 4x2xAWG23 S-FTP CAT 7 1000 MHz LSZH installation cable For installation
More informationLevel III measurement accuracy of field testers for Twisted Pair Copper Cabling Explained in Technical Detail
Level III measurement accuracy of field testers for Twisted Pair Copper Cabling Explained in Technical Detail 1 Outline Henriecus Koeman Fluke Networks July 9, 2001 This rather technical discussion contains
More informationwww.greenelectricalsupply.com REPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Project No. G100125842 Date: August 17, 2010 REPORT NO. 100125842CRT-010 TEST OF PAR 38 LED LAMPS MODEL NOS. S8854 / S8861
More informationwww.greenelectricalsupply.com REPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Project No. G100125842 Date: August 17, 2010 REPORT NO. 100125842CRT-018 TEST OF PAR 30L LED LAMPS MODEL NOS. S8814 / S8821
More informationwww.greenelectricalsupply.com REPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Project No. G100125842 Date: August 17, 2010 REPORT NO. 100125842CRT-036 TEST OF LED CANDLE LAMPS MODEL NOS. S8891 / S8894
More informationwww.greenelectricalsupply.com REPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Project No. G100125842 Date: August 17, 2010 REPORT NO. 100125842CRT-039 TEST OF LED CANDLE LAMPS MODEL NOS. S8899 / S8903
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/IEC TR 11801-9901 Edition 1.0 2014-10 colour inside Information technology Generic cabling for customer premises Part 9901: Guidance for balanced cabling in support of at least 40
More informationN/A. An independent organization testing for safety, performance, and certification.
September 27, 2012 Vicsa Safety S.A. Casa Matriz Pintor Cicarelli 683-SAN JOAQUÍN SAN CHILI Intertek Test Report Number: G100766457CRT-121 Dear Claudio Martinez Muratsuka: Intertek has completed the evaluation
More information- Characteristic impedance of cabling links is characterised by Return Loss
ISO/IEC 11801 ISO 11801 is the principle design standard for structured cabling systems for all countries of the world that do not have more specific standards, such as ISO 11801 (European Union), TIA
More informationIndependent Testing - For End User Confidence
Independent Testing - For End User Confidence EVALUATION OF PERFORMANCE OF LEVEL IIIe FIELD TESTER FROM FLUKE NETWORKS, TYPE DTX-1800 CABLE ANALYZER, FOR 500 MHz PERMANENT LINK MEASUREMENTS Main Unit,
More informationEMC TEST REPORT. NORTE SIRIUS ENTERPRISE CO., LTD , Shin-Sheng St., Chung-Ho Dist, New Taipei City, Taiwan
Page 1 of 32 EMC TEST REPORT Report No.: TS11020117-EME Model No.: NS-PSE, NS-POINTED, NS-PSQUARE, NS-PF-S, NS-PT, NS-PR, NS-PU, NS-PF-H, NS-BALIBA, NS-FLEXMA Issued Date: Mar. 01, 2011 Applicant: NORTE
More informationTest Report based on DIN EN ISO/IEC 17025: 2005
Test Report based on DIN EN ISO/IEC 1725: 25 GHMT Type Approval 2 Connector Permanent Link, Copper, Class EA according ISO/IEC 1181-1 Ed.1. Document-no: P582a-18-E This Test Report with the measurements
More informationREPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045
REPORT 3933 US ROUTE 11 CORTLAND, NEW YORK 13045 Project No. G101183506 FOR THE SCOPE OF ACCREDITATION UNDER NVLAP LAB CODE 100402-0. Date: June 6, 2013 REPORT NO. 101183506CRT-001 TEST OF ONE LED FLOOD
More informationTEST REPORT. Report Number: MIN-001 Rev 1.1 Project Number: G Testing performed on the 2102 IPG
TEST REPORT Report Number: 100511823MIN-001 Rev 1.1 Project Number: G100511823 Testing performed on the 2102 IPG FCC ID: SVHBAROSTIMIPG1 Industry Canada ID: 9464A-IPG210A to 47 CFR Part 95 Subpart I:2013
More informationTEST REPORT. : The submitted samples complied with the above EMC standards. TRF No.: AS NZS (2012)-b
TEST REPORT Applicant Name & Address Manufacturing Site Sample Description Product Model No. : Shenzhen SOFARSOLAR Co., Ltd. 3A-1, Huake Building, East Technology Park, Qiaoxiang Road, Nanshan District,
More informationData sheet Patch cord Cat.6 A AWG m yellow
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification especially suitable for shielded and unshielded class E A systems fully shielded Cat.6 A patch
More informationEMC TEST REPORT. Report No.: TS EME Model No.: 33XR-A Issued Date: Jan. 08, 2009
Page 1 of 18 EMC TEST REPORT Report No.: TS08100063-EME Model No.: 33XR-A Issued Date: Jan. 08, 2009 Applicant: Test Method/ Standard: Test By: FLUKE CORP. 6920 Seaway Blvd, M/S 266D Everett, WA 98203
More informationComparison of vario. ous cables & channels
Noise Immunity Performance Analysis of Screened Cab bling Systems Comparison of vario ous cables & channels Martin Rossbach, Nexans Cabling Solutions Victoria, BC, Canada May 16, 2013 Overview Definition
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 61935-1 Edition 4.0 2015-12 colour inside Specification for the testing of balanced and coaxial information technology cabling Part 1: Installed balanced cabling as specified
More informationTest report No. : M Page : 1 of 24 Issued date : June 30, 2017 RADIO TEST REPORT. Test Report No. : M
Page : 1 of 24 RADIO TEST REPORT Test Report No. : 11818213M Applicant : TAIYO YUDEN CO., LTD. Type of Equipment : Bluetooth Smart / ANT Module Model No. : EYSHSN Test standard : EN 300 328 V2.1.1 (Except
More informationData sheet MC GC1000 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft
Page 1/6 MC GC0 pro23 Cat.7 S/FTP 4P LSHF-FR 1640 ft 18427034141 Illustrations Principle diagram Product specification 10 GBit installation cable, simplex installation cable Cat.7 AWG 23 S/FTP with wires
More informationADDENDUM TEST REPORT
Page : 1 of 19 ADDENDUM TEST REPORT Test Report No. : 11707924M Applicant : TAIYO YUDEN CO., LTD. Type of Equipment : Bluetooth Smart / ANT Module Model No. : EYSHCN Test standard : EN 300 328 V2.1.1 (Except
More informationB. Division-16 Basic Materials and Methods section apply to work specified in this section.
Section 16745 PREMISE CABLING SYSTEMS PART ONE GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification
More informationInformation technology. Generic cabling systems, General requirements
KRAMER WELL CONNECTED WITH KRAMER BCLS-33OR-5 Al-Mylar Conductor CAT6A F/UTP LSZH Cable Drain Wire Kramer s BCLS-33OR is a high performance CAT6A F/UTP cable designed for IT, LAN and Ethernet installations.
More informationSome considerations concerning alien crosstalk Dr.-Ing. J.-H. (Jo) Walling Consultant Beaconsfield, P.Q. Canada
Some considerations concerning alien crosstalk Dr.-Ing. J.-H. (Jo) Walling Consultant Beaconsfield, P.Q. Canada jo.walling@sympatico.ca 0. Summary Contrary to the simplified perception about alien crosstalk,
More informationInternational Maritime Organization (IMO) Fire Test Procedures (FTP) Code Part 5 and 6
Page 1 of 20 International Maritime Organization (IMO) Fire Test Procedures (FTP) Code Part 5 and 6 Temp-Coat 101 Project No. 100368576SAT-002.1A April 28, 2011 Prepared for: Temp-Coat Brand Products LLC
More informationTest Report. Test Result: PASS
Test Report Designation : C6 A TIA/EIA68B. UTP Length :. m Temp :. Deg C Specification : CAT6 A MHZ UTP Test Date/Time : 11--16 1:1 Sample-ID-No. : GGRQ4 Customer : Rertech Drum no. :. Cable type : CAT6A
More informationISO/IEC JTC 1/SC 25/WG 3 N 755 Date: Replaces ISO/IEC JTC 1/SC 25/WG 3 N n/a
ISO/IEC JTC 1/SC 25/WG 3 N 755 Date: 2005-05-18 Replaces ISO/IEC JTC 1/SC 25/WG 3 N n/a ISO/IEC JTC 1/SC 25/WG 3 Customer Premises Cabling Secretariat: Germany (DIN) DOC TYPE: Liaison document TITLE: Letter
More informationTEST REPORT. For RFID READER/WRITER. In conformity with. FCC CFR 47 Part15 Subpart C
TEST REPORT For RFID READER/WRITER In conformity with FCC CFR 47 Part15 Subpart C Model: TR3XM-SD01 / TR3XM-SU01 / TR3XM-SN01 FCC ID: MK4TR3XM-SX01 Test Item: RFID READER/WRITER Report No: RY1203Z12R1
More informationTest report No. : S Page : 1 of 24 Issued date : August 23, 2018 RADIO TEST REPORT. Test Report No. : S
Page : 1 of 24 RADIO TEST REPORT Test Report No. : 12406766S Applicant : TAIYO YUDEN CO., LTD. Type of Equipment : Bluetooth low energy / ANT Module Model No. : EYSLSN Test standard : EN 300 328 V2.1.1
More informationCall For Interest PoE- plus. Chris Di Minico MC Communications
Call For Interest PoE- plus Chris Di Minico MC Communications cdiminico@ieee.org 1 IEEE 802.3 CFI Powering Ethernet Devices Over Data Cabling IEEE 802.3af Web Cameras Ethernet Switch Data and Power Security
More informationData sheet MC GC1200 pro22 Cat.7A S/FTP 4P LSHF-FR, class Dca s2 d2
Page 1/7 Illustrations Principle diagram See enlarged drawings at the end of document Product specification 10 GBit installation cable, simplex installation cable Cat.7A AWG 22 S/FTP with wires shielded
More information1) The addition of TCL and ELTCTL requirements to Category 6
Subject 444 TO: SUBJECT: 455 East Trimble Road San Jose, CA 95131 July 28, 2008 Subscribers to UL s Listing and Verification Services for Communications Cable (DUZX) Revised Test and Follow-Up Service
More informationEMC VERIFICATION SUMMARY Report No.: SZHH
EMC VERIFICATION SUMMARY Toy ITE Others Additional Models: 0801 to 0899 INCLUSIVE, 0804, 0804W, 0805, 0806, 0807, 0808, 0809, 0811, 0811W, 0812, 0813, 0814,0815, 0816, 0817,0817 ROOM 619, 6/F. PENINSULA
More informationReturn Loss of Test Channel for Rx ITT in Clause 136 (#72)
Return Loss of Test Channel for Rx ITT in Clause 136 (#72) Yasuo Hidaka Fujitsu Laboratories of America, Inc. IEEE P802.3cd 50GbE, 100GbE, and 200GbE Task Force, July 11-13, 2017 IEEE 802.3 Plenary Meeting
More informationOne Enterprise. One Infrastructure. One Partner. Optical Fiber Loss Testing. Optical loss testing in the field is not as simple as it seems.
Optical loss testing in the field is not as simple as it seems. Abstract Optical Fiber Loss Testing Optical loss testing of multimode fiber can be affected by many variables, including fiber mismatch,
More informationTest report TRFWL. Lotek Wireless Inc. SRX800 SRX A-SRX800. RSS-215 Issue 2, June Date of issue: July 11, 2014.
ONE WORLD OUR APPROVAL Test report 250123-2TRFWL Date of issue: July 11, 2014 Applicant: Lotek Wireless Inc. Product: SRX800 Model: SRX800 IC Registration number: 4272A-SRX800 Specification: RSS-215 Issue
More informationLAN tester EASYLAN. Instruction manual
LAN tester EASYLAN Instruction manual LAN TESTER EASYLAN Specifications indicated in the present instruction manual may be changed without prior notice. 1. INTRODUCTION AND SAFETY PROVISIONS...7 1.1 INTRODUCTION...
More informationReport no GZU-001. Growatt 30000TL3-S, Growatt 30000TL3-SE. Max. input current: 34A/34A 38A/38A
age 2 of 27 Rating : Model Max. DC input Voltage: 30000TL3-S, 30000TL3-SE 33000TL3-S, 33000TL3-SE Input 1000Vdc 40000TL3- NS, 40000TL3- NSE 50000TL3-S, 50000TL3-SE Max. input current: 34A/34A 38A/38A DC
More informationWLS-5500 Receiver (KSF & W26)
WLS-5500 Receiver (KSF & W26) Installation Manual DN1869-0912 Warning! This manual contains information on limitations regarding product use and function and information on the limitations as to liability
More informationData sheet. E-DAT modul Cat.6A 8(8) jack, T568B. Illustrations P/N I-B1 EAN Product specification. Page 1/
Page 1/9 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification modular termination unit Cat.6A, RJ45 component testing for Cat.6A to ISO/IEC 11801
More informationInstall & Go SMARTen (Cat.6A) STP Trunk Cable Assembly General
Install & Go SMARTen (Cat.6A) STP Trunk General Cat 8 Filler Cat.6A U/FTP Horizontal cables (x6) Fan-Out Cables Cat.6A STP Keystones TRUNK CABLE SECTION VIEW Trunk Isometric Front View RiT s Copper Install
More informationPDI TEST REPORT. No.0437
ABN 21 002 065 769 PDI TEST REPORT No.0437 COMPREHENSIVE Cat 6 TRANSMISSION TESTING ON 4 Pair 5m RJ45 Patch Cord With COBLE (COB) Cat 6 RJ45 Plug for Australian Communications Laboratories Pty Ltd DATE:
More informationData sheet MC GC1200 pro22 Cat.7A S/FTP 2x4P LSHF-FR 1640 ft
Page 1/7 Illustrations Principle diagram Product specification 10 GBit installation cable, duplex installation cable Cat.7A AWG 22 S/FTP with wires shielded in pairs 2x4 pairs (PiMF) pair shield: plastic
More informationData sheet E-DAT modul 2 port AP Cat.6 A, pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC
More informationBRU-100 Physical Installation
APPENDIX B BRU-100 In This Appendix: Warnings and Cautions, page 50, page 51 Check List, page 57 This appendix provides guidance for the physical installation of the BRU-100 Remote Unit at a subscriber
More informationCABLE.
CABLE www.pcnet-cable.com.tw sales@pcnet-cable.com.tw PCnet Leading Your Net! PCnet was founded in 1985 and is a leading manufacturer of netwking industries. We provide a complete range of products f structured
More informationTest Report. Prepared for: Wilson Electronics, Inc. Model: Description: Dual Band In-Building Signal Booster FCC ID: PWO
Test Report Prepared for: Wilson Electronics, Inc. Model: 460005 Description: Dual Band In-Building Signal Booster FCC ID: PWO460005 To FCC Part 20 Date of Issue: January 27, 2014 On the behalf of the
More informationUTP Cat 5e cable (200 MHz) (PVC sheath)
JetLan is the only structured cabling system that includes all the passive components required for the installation or adaptation of your data network, as we include all the different types of high performance
More informationInstall & Go Cat.8 S/FTP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
More informationLAN/Length Cable Tester TCT-2690 Pro
User Manual LAN/Length Cable Tester TCT-2690 Pro Introduction 2 Features 2 Specifications 3 Instructions for Operation 4 LAN Mode 4 Memory Mode 7 Low Battery Mode 8 TEL Mode 8 COAX Mode 10 TONE Mode 11
More informationEMI TEST REPORT : SAMSUNG ELECTRONICS CO., LTD.
Page : 1 of 15 EMI TEST REPORT Test report No. : EMC- FCC- 0064 Type of equipment : Digital Video Camcorder Model No. : SCD39 FCC ID. : A3LTHETA Applicant : SAMSUNG ELECTRONICS CO., LTD. Test standards
More informationTable of Contents 1. GENERAL INFORMATION SYSTEM TEST CONFIGURATION CONDUCTED EMISSIONS TEST RADIATED EMISSION TEST...
Table of Contents 1. GENERAL INFORMATION... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST... 4 1.2 RELATED SUBMITTAL(S) / GRANT (S)... 7 1.3 TEST METHODOLOGY... 7 1.4 EQUIPMENT MODIFICATIONS... 7
More informationSubject: Proposal to replace the TBDs for Fast 160 in SPI-4 and to winnow the options
T10/00-389r0 Seagate Technology 10323 West Reno (West Dock) Oklahoma City, OK 73127-9705 P.O. Box 12313 Oklahoma City, OK 73157-2313 Tel: 405-324-3070 Fax: 405-324-3794 gene_milligan@notes.seagate.com
More informationPractical PoE Tutorial
Practical PoE Tutorial Chris DiMinico, MC Communications/Panduit Chad Jones, Cisco Systems Ron Nordin, Panduit Lennart Yseboodt, Philips Lighting Berlin, Germany July 10, 2017 Agenda Background/Scope Chris
More informationAustralian/New Zealand Standard
AS/NZS IEC 61935.1:2006 IEC 61935-1:2005 AS/NZS IEC 61935.1:2006 Australian/New Zealand Standard Testing of balanced communication cabling in accordance with ISO/IEC 11801 Part 1: Installed cabling AS/NZS
More informationInstall & Go Cat.8 STP Trunk Cable Assembly Description
Description Cat 8 Filler Cat.8.2 S/FTP Horizontal cables (x6) Fan-Out Cables Cat 8 STP Keystones TRUNK CABLE SECTION VIEW Assembly Isometric Front View RiT s Copper Install & Go System provides a pre-terminated
More informationIndependent Testing - For End User Confidence
Independent Testing - For End User Confidence ELECTRICAL TRANSMISSION PERFORMANCE TESTING OF SCREENED CATEGORY 6 ISO/IEC, EN & TIA/EIA CONNECTING HARDWARE ACCORDING TO REQUIREMENTS OF 2ND EDITION ISO/IEC
More informationPart Number: 7953A Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor
Part Number: Cat 6 600V DataTuff, (4 pr) 23 AW G Solid BC, PP/PVC/PVC, Foil Shld, CMR, CMX-Outdoor Product Description Four Cat 6 23 AW G solid bare copper conductors, bonded pair polypropylene insulation,
More informationDetailed Specifications & Technical Data
RFP Specification #17-11125-C, Exhibit 2 Programmable Light Poles for BART Plaza ENGLISH MEASUREMENT VERSION 1502SB Multi-Conductor - Multimedia Control Cable For more Information please call 1-800-Belden1
More informationN432A Thermistor Power Meter DATA SHEET
N432A Thermistor Power Meter DATA SHEET Why Keysight s Power Meters and Sensors? Keysight s only power meter that supports thermistor mount with useful enhancements for metrology and calibration lab environments.
More informationData sheet. E-DAT modul 3 port AP Cat.6A, pure white. Illustrations P/N E EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6A to ISO/IEC
More information10GBASE-T. Channel Model Proposal
Channel Model Proposal March 2004 Orlando, FLA 0 Overview Purpose of presentation: Get agreement on a baseline channel models that will be used for evaluating PHY proposals Channel models must be acceptable
More informationTEST REPORT. Report Number: MIN-005 Project Number: G Testing performed on the ICON Scanner OEM (Gen 1.1)
TEST REPORT Report Number: 103103871MIN-005 Project Number: G103103871 Testing performed on the ICON Scanner OEM (Gen 1.1) FCC ID: WTM-ICONNFC1 IC: 7998A-ICONNFC1 to 47 CFR Part 15.225:2017 RSS- 210, Issue
More informationShip Hybrid Cable DL 58 5 x UC1500 SS22 2x SM BendBright XS G.657.A2 6x MM MaxCap-BB-OM4
Wiking Ship Hybrid Cable Application Hybrid cable for shipboard applications DATA ELEMENT Primary (Campus), Secondary (Riser), Tertiary (Horizontal) IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; 10GBase-T
More informationPhysical Test Setup for Impulse Noise Testing
Physical Test Setup for Impulse Noise Testing Larry Cohen Overview Purpose: Use measurement results for the EM coupling (Campbell) clamp to determine a stable physical test setup for impulse noise testing.
More informationAutomatic measuring system for xdsl & LAN cables (100 MHz) Designed to measure all types of telecom and special cables
Indicative picture Phoenix 1004 DT Automatic measuring system for xdsl & LAN cables (100 MHz) Designed to measure all types of telecom and special cables Compliant to all major national standards for telephone,
More informationCabling Ad Hoc Cat 5e Measurements
Cabling Ad Hoc Cat 5e Measurements Larry Cohen Solarflare Communications 1 Overview Cabling Ad Hoc Test Plan Measurement One Cat 5e horizontal cable sample, four test channel configurations characterized
More informationCAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
More informationFOR INTERCONNECT AND CROSS-CONNECT APPLICATIONS
FOR INTERCONNECT AND CROSS-CONNECT APPLICATIONS HIGH SPEED DS-3 & DS-4 CABLES Belden Your Widest Selection for Meeting DS-3 and DS-4 Network Requirements BELDEN, THE CABLE TECHNOLOGY LEADER IN HIGH-SPEED
More informationDATA SHEET. N1911A/N1912A P-Series Power Meters and N1921A/N1922A Wideband Power Sensors
DATA SHEET N1911A/N1912A P-Series Power Meters and N1921A/N1922A Wideband Power Sensors LXI Class-C-Compliant Power Meter A P-Series power meter is a LXI Class-C-compliant instrument, developed using LXI
More informationP700WLS IoProx Receiver
Installation Manual Warning! This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual
More informationAutomatic measuring system for LAN cables AXT & Cat 8 HF only
Picture for information only Automatic measuring system for LAN cables AXT & Cat 8 HF only The fastest measuring system on the market Checked against certified ISO 17025 standards High accuracy Easy to
More informationData sheet C6 A modul K 90 jack - keystone style
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: Keystone, 90 cable feed solid,
More informationECHOSTAR 54.0 BRISBANE VOICE REMOTE 2017 MODEL: URC-2027BC0-R
Page 1 of 17 FCC PART 15, SUBPART B and C TEST REPORT for ECHOSTAR 54.0 BRISBANE VOICE REMOTE 2017 MODEL: URC-2027BC0-R Prepared for UNIVERSAL ELECTRONICS, INC. 201 E. SANDPOINTE, 8 TH FLOOR SANTA ANA,
More informationMONITORED PRO econnect TM PDU
MONITORED PRO econnect TM PDU K E Y F E AT U R E S Continuous, automated power monitoring at each breaker and each outlet with ±1% metering accuracy Local display with an interactive screen that displays
More information