EESTOR INC. TEST REPORT

Size: px

Start display at page:

Download "EESTOR INC. TEST REPORT"

Alexina Gregory
5 years ago
Views:

1 EESTOR INC. SCOPE OF WORK Performance testing of capacitive samples (Ceramic samples called 361-1, 358-4, 358-5) REPORT NUMBER DAL-003 ISSUE DATE 29-JAN-2018 REVISION DATE 28-FEB-2018 PAGES 6 DOCUMENT CONTROL NUMBER GFT-OP-10a (6-March-2017) 2017 INTERTEK

2 th St., Suite 400 Plano, TX, Telephone: (972) Fax: (972) /29/2018 Interte Report No DAL-003 Interte Project No. G Bryan Kelly 715 Discovery Blvd Ste 107 Cedar Par, TX USA Subject: Performance testing of capacitive samples (Ceramic samples called 361-1, 358-4, 358-5) Dear Bryan Kelly, This letter report represents the results of our evaluation of the above referenced samples. SECTION 1 SUMMARY Four unique samples were tested at the EESTOR Inc. facility at 715 Discovery Blvd. Ste: 107, Cedar Par, Texas, 78613, USA on the 4 th of Jan There, samples were identified as 361-1, 358-4, Samples were subjected to the measurements outlined in section 2 of this report. This report is for the exclusive use of Interte's Client and is provided pursuant to the agreement between Interte and its Client. Interte's responsibility and liability are limited to the terms and conditions of the agreement. Interte assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Interte name or one of its mars for the sale or advertisement of the tested material, product or service must first be approved in writing by Interte. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Interte certification program. Version: 6-March-2017 Page 2 of 6 GFT-OP-10a

3 SECTION 2 TESTING The items below represent a summary of the tests and results. Test Location: 715 Discovery Blvd. Ste:107, Cedar Par, Texas Test Date: 4-JAN-2018 Test Site Ambient Conditions: 20.7 C, 15.6%RH Parameters measurement: Equipment List: Equipment Asset Number Equipment Type Manufacturer Name Model Number Calibration Date Calibration Due Date (Interte) 260 Temperature / Extech /20/2017 9/20/2018 Humidity Monitor (Interte) 1479 LCR Meter BK Precision 878B 5/14/2017 5/14/2018 (Interte) 1191 Micro meter Accuremote 0-1" 10/23/ /23/2018 (EESTOR) IR Meter VITREK 957i 12/15/ /15/2018 Below formula used to calculate some of the parameters. Formula used to find relative of the dielectric material (): 1) =dc/ 0 A Where: d =Sample thicness (m) C = capacitance (F) 0 = Permittivity of space (8.854 x F/m) A = Area of circular plate based on measured diameter (m²) Parameters measurement and calculation: VAC Parameters at 1 V and 1 Hz Voltage (Vrms): 1 Frequency (Hz): 1 Sample ID shape width (mm) thicness (µm) Dissipation Factor DF Round Version: 6-March-2017 Page 3 of 6 GFT-OP-10a

4 VAC Parameters at 1 V and 1 Hz continue from Page 3 Voltage (Vrms): 1 Frequency (Hz): Round Round Voltage (Vrms): 500 Frequency (Hz): 60 VAC Parameters at 500 V and 60 Hz Sample ID shape width (mm) thicness (µm) Dissipation Factor DF (Vrms/µm) Round Round Round Shape: VDC Parameters for Sample ID: Round width (mm): 4.00 Dielectric thicness (µm): 600 Voltage DC Leaage current (na) Resistance ir (GΩ) Time Constant (s) Version: 6-March-2017 Page 4 of 6 GFT-OP-10a

5 Shape: VDC Parameters for Sample ID: Round width (mm): 5.95 Dielectric thicness (µm): 443 Voltage DC Leaage current (na) Resistance ir (GΩ) Time Constant (s) Shape: VDC Parameters for Sample ID: Round width (mm): 5.66 Dielectric thicness (µm): 559 Voltage DC Leaage current (na) Resistance ir (GΩ) Time Constant (s) Version: 6-March-2017 Page 5 of 6 GFT-OP-10a

6 Breadown voltage Sample ID shape Dielectric thicness (µm) Highest DC voltage of stable C Breadown DC Voltage Highest Round na Round Round na 5.3 SECTION 3 RESULTS NA SECTION 4 PHOTOGRAPHS No photographs provided per the request of EESTOR Inc. SECTION 5 PROJECT STATUS & ACTION Issuance of this letter report completes the testing portion covered by Interte Project No. G If there are any questions regarding the results contained in this report, or any of the other services offered by Interte, please do not hesitate to contact your dedicated Interte Project Engineer. Completed by: Bhaul Patel (BD) Reviewed by: Javier Lozano Title: Project Engineer Title: Industrial Team Lead Signature: Signature Date 2/28/2018 Date: 2/28/2018 Version: 6-March-2017 Page 6 of 6 GFT-OP-10a

TEST REPORT. ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

TEST REPORT. ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source ASTM E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source TEST REPORT Intertek Testing Services NA, Inc. 16015 Shady Falls Road Elmendorf,