QPL, general purpose, NATC, hermetic, filtered, lanyard released and custom solutions. MIL-DTL Series III connectors and cable assemblies

Transcription

1 QPL, general purpose, NATC, hermetic, filtered, lanyard released and custom solutions MIL-DTL Series III connectors and cable assemblies

2 General purpose connectors Overview 6 Technical Specifications 7 Part Number Configuration 8 Shell / Insert Configurations 9 Insert / Contact Ratings 10 Insert Drawings 11 Polarization Tables 14 Installation Instructions 59 Jam-Nut Receptacles D38999/24 Dimensions 17 Straight Plugs D38999/26 Dimensions 15 In-Line Receptacles Dimensions 18 Wall-Mount Receptacles D38999/20 Dimensions 16 Feed-Through Receptacles Dimensions 19 2 EATON MIL-DTL Series III Connectors and Cable Assemblies

3 Specialized interconnect solutions Wing-Lok Plugs Overview 20 Technical Specifications 21 Part Configuration 22 Shell / Insert Configurations 23 Mechanical Drawings 24 Lanyard Plugs QPL and modified configurations Overview 42 Technical Specifications 43 Part Configuration 45 Shell / Insert Configurations 46 Mechanical Drawings 47 Filtered Receptacles Overview 26 Technical Specifications 27 Part Configuration 30 Shell / Insert Configurations 31 Mechanical Drawings 32 PC Tail Connector Configurations Overview 50 Ordering Information 51 Hermetic Receptacles D38999/21, 23, 25, & 27 Overview 34 Technical Specifications 35 Part Configuration 36 Shell / Insert Configurations 37 Mechanical Drawings 38 NASA Threaded Coupling NATC Shell Styles 00, 06, & 07 Overview 52 Technical Specifications 53 Part Configuration 54 Shell / Insert Configurations 55 Mechanical Drawings 56 Custom Connectors Overview 5 Cable Assemblies Overview 4 EATON MIL-DTL Series III Connectors and Cable Assemblies 3

4 An extensive array of mil-circular connectors NASA SSQ NATC connectors are available in 53 standard contact patterns including MIL--DTL high speed data and bussed configurations. Micro-military circular connectors incorporate latest-generation designs to deliver significantly smaller sizes, lower weights and higher contact densities that MIL--DTL solutions. Power-Breech connectors are rated up to 900 amps. These shell size solutions utilize MIL--DTL Series IV derived coupling mechanisms. MIL--DTL Series III and IV solutions include QPL, general purpose, hermetic, filtered, lanyard released and Wing-Lok plugs. Custom cables and wiring harnesses Eaton can provide custom cables and wiring harnesses for turnkey design, collaborative co-development, or build-to-print programs. End-to-end connectivity capabilities include: Application-specific solutions for high currents and voltages, Ethernet, and RF applications Single and multiple-layer foil and braided EMI/RFI shielding Extreme temperatures, shock, vibration, radiation, corrosive media and vacuum Integrated fluid and gas delivery and cable separation NASA NHB 5300 soldering and NASA-STD cable manufacturing compliances In-house capabilities include overmolding and continuous fabric and metal braidings 4 EATON MIL-DTL Series III Connectors and Cable Assemblies

5 Innovative engineering facilitates cost effective, reusable solutions Heritage-proven technologies and design platforms can be leveraged to quickly provide a wide range of custom, harshenvironment solutions for interconnect applications ranging from shoulder-fired missile launchers to deep space probes. One example of Eaton s track record of innovation is the umbilical connector described below. MIL -DTL Series III derived shells and inserts reduce costs and leverage proven reliability and availability. Inserts can be upgraded to support changing mission requirements. A resettable release mechanism was developed based on a separation-nut design with over 40 years of flight heritage. This lanyard connector integrates redundant-release mechanisms with standard MIL-DTL Series III coupling threads to support low-pull force, off-angle releases. Connector pins mate with the umbilical cable. The opposing ends of these feedthroughs mate to connectors mounted on the stationary plate. Umbilical-separation sequence 1 Lanyard-actuated separation nut with double-shear dowel pin redundancy initiates umbilical separation. Umbilical cable plate 2 Force-balanced spring towers work in conjunction with an ejector plate located in between the two connector plates to power separation. 3 The six sets of connectors simultaneously demate facilitating damage-free decoupling and reusability. Host system mounted plate Connector sockets mate with the host system wiring harness. The opposing ends of these feedthroughs connect to the umbilical-cable plate. EATON MIL-DTL Series III Connectors and Cable Assemblies 5

6 General purpose connectors overview Engineered to Deliver Uncompromised Performance in Mission-Critical Applications Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. High speed data including MIL-STD grounding fingers provide up to 65dB protection at 10GHz. -65 C to 200 C operating temperatures. Self locking coupling nuts and end-bell-accessory hardware. Finish options include 500 hour salt-spray-rated platings. Eaton s MIL-DTL Series III, QPL and modified connectors are designed to deliver uncomprimised performance in harshenvironment applications. Eaton can quickly deliver modified Series III solutions to meet a broad range of application-specific requirements: Customer-defined EMI/RFI compliances. Special insert patterns and shell configurations. Custom connector/cable assemblies. Please refer to page 5 for additional capabilities. Straight plugs Wall-mount receptacles Harsh-environment design features EMI ring Jam-nut receptacles In-line receptacles Metal contact retainer clips Plastic and rubber materials survive 1000 hours extended heat without deforming. Feed-thru receptacles 6 EATON MIL-DTL Series III Connectors and Cable Assemblies

7 General-purpose connectors technical specifications Materials, Finish, and Mechanical Class C Class F Class G Class K Class T Class W Receptacle/Plug Shell and Coupling Ring Material 2024 Aluminum 2024 Aluminum 2024 Aluminum Corrosion Resistant Stainless Steel 2024 Aluminum 2024 Aluminum Receptacle /Plug Shell and Coupling Ring Plating Anodize Nickel per ASTM B733 Nickel per ASTM B733 Passivated Nickel Fluorocarbon Polymer CAD/OD per QQ-P-416 Contact Material & Plating Insulator Grommet and Seal Grounding Springs Mating Life Contact Retention Polarization Copper Alloy with Gold Plating, 50 Micro-Inches Minimum - All Finish Classes Hard Dielectric Wafer - All Finish Classes Fluorosilicone - All Finish Classes Beryllium Copper - All Finish Classes 500 Cycles Minimum - All Finish Classes Up to 25 Pounds - All Finish Classes Per MIL-STD Series III; N, A, B, C, D, and E - All Finish Classes Environmental, Shock, Vibration, and EMI/RFI Class C Class F Class G* Class K** Class T Class W Operating Temperature -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 175 C (-85 F to 347 F) -65 C to 175 C (-85 F to 347 F) Sealing Sand and Dust as per MIL-STD-202 and Ice Resistance - All Finish Classes Corrosion Resistance Withstands 500 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Fluid Immersion Sine Vibration Random Vibration Shock Various Fuels, Solvents, Coolants, and Oils as per EIA All Finish Classes 60g at Ambient Temperature - All Finish Classes 50G at Ambient Temperature with Simulated Accessory Load - All Finish Classes 300g +/- 15% Half-Sine-Wave Magnitude for 3 +/- 1mS - All Finish Classes EMI 100MHz No EMI Shielding > 90 db > 90 db > 80 db > 90dB > 90dB EMI 10GHz No EMI Shielding > 65 db > 65 db > 45 db > 50dB > 50dB Shell-to-Shell Conductivity 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop **Class G thermal vacuum outgassing: total mass loss 1.0%, collected volatile condensible material 0.1% maximum. **Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. EATON MIL-DTL Series III Connectors and Cable Assemblies 7

8 General-purpose connectors part-number configuration MIL-DTL part number D38999/ 26 W B 35 P N Eaton part number G3 G6 W P N MIL-DTL Series III Specification Polarization (Page 14) G3 Connectors Polarization (Page 14) Shell Type (Table Below) Contact Style (Table Below) Shell Type (Table Below) Contact Style (Table Below) Finish Class (Table Below) Shell Size (Page 9) Insert Arrangement (Page 9) Finish Class (Table Below) Shell Size (Page 9) Insert Arrangement (Page 9) Designator Descriptions Designator Type Military Eaton Description MIL-DTL / 26 G6 Straight Plug MIL-DTL / Wall-Mount Receptacle Shell Type - 03 In-Line Receptacle - 05 Feed-Through Receptacle MIL-DTL / Jam-Nut Receptacle Finish Class C C Anodize, -65 C to 200 C (-85 F to 392 F) F F Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) G G Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) K K CRES (Passivated), -65 C to 200 C (-85 F to 392 F) T T Nickel Fluorocarbon Polymer, -65 C to 175 C (-85 F to 347 F) W W* CAD/OD per QQ-P-41665, -65 C to 175 C (-85 F to 347 F) P P Pin Contact Style S S Socket A A Pin, Non-Standard (Connector Shipped Without Contacts) *Finish class W configurations are QPL certified. B B Socket, Non-Standard (Connector Shipped Without Contacts) 8 EATON MIL-DTL Series III Connectors and Cable Assemblies

9 General-purpose connectors standard shell & insert configurations Shell-Size Conversions Military Designation A B C D E F G H J Shell Size & Eaton Designation Please contact Eaton to discuss custom shells and inserts Shell Size Insert SR Total Contacts 22D TWX Shell Size Insert SR Total Contacts 22D TWX 9 35 M M I I I II I M I I I M I II I I I M I M I II I M M I M M II SR = Service Rating M M I II M M I I II M I I I II I M N I N I I M I I I EATON MIL-DTL Series III Connectors and Cable Assemblies 9

10 Insert and contact ratings Insert Service Ratings Suggested Operating Voltage (Sea Level) Test Voltage (Sea level) Test Voltage 50,000 Ft. Test Voltage 70,000 Ft. Test Voltage 100,000 Ft. Service Rating AC (RMS) DC I VRMS 600 VRMS 400 VRMS 200 VRMS II VRMS 800 VRMS 500 VRMS 200 VRMS M VRMS 550 VRMS 350 VRMS 200 VRMS N VRMS 400 VRMS 260 VRMS 200 VRMS Contact Part Number Cross Reference Contact Size Eaton Part Number Military Part Number 22D M39029/ M39029/ M39029/ Pin M39029/ Contact Eaton M39029/ COAX P00 M39029/ TWINAX P00 M39029/ D M39029/ M39029/ M39029/ Socket M39029/ M39029/ COAX S00 M39029/ TWINAX S00 M39029/ Contact Size Crimp Well Data Well Diameter Minimum Well Depth Recommended Contact Rating (Amps) Wire Size (Awg) D ± ± ± ± ± EATON MIL-DTL Series III Connectors and Cable Assemblies

11 Insert drawings 9-35 to Legend: = Not MIL-Standard = Main Key, Key Way Polarization Contact Size No. 8 (TWINAX) Front Face of Pin Insert Shown) No. 10 No. 12 No.16 No. 20 No. 22D Insert Arrangement: Quantity and Size: Service Rating: No, 22D Contacts M No. 20 Contacts I No. 16 Contacts I No. 16 Contacts II No. 20 Contacts M No. 22D Contacts M Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts I No. 20 Contacts I No. 16 Contacts I No. 22D Contacts I No. 20 Contacts II No. 16 Contacts I Insert Arrangement: Quantity and Size: Service Rating: No. 16 Contacts 14 No. 20 Contacts I No. 20 Contacts I No. 20 Contacts I No. 22D Contacts M No. 16 Contacts 8 No. 20 Contacts I No. 8 Contacts M Insert Arrangement: Quantity and Size: Service Rating: No. 12 Contacts I No. 16 Contacts II No. 20 Contacts I No. 22D Contacts M No. 22D Contacts 2 No. 8 Contacts M Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts 2 No. 16 Contacts I No. 8 Contacts M No. 8 Contacts M No. 16 Contacts II No. 22D Contacts 4 No. 8 Contacts M EATON MIL-DTL Series III Connectors and Cable Assemblies 11

12 Insert drawings to Legend: = Not MIL-Standard = Main Key, Key Way Polarization Contact Size No. 8 (TWINAX) Front Face of Pin Insert Shown) No. 10 No. 12 No.16 No. 20 No. 22D Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts I No. 22D Contacts M No. 8 Contacts M No. 12 Contacts I Insert Arrangement: Quantity and Size: Service Rating:: No. 16 Contacts II No. 20 Contacts 2 No. 8 Contacts M No. 22D Contacts M No. 20 Contacts 2 No. 16 Contacts I Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts I No. 16 Contacts II No. 22D Contacts M No. 20 Contacts I Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts I No. 16 Contacts I No. 16 Contacts II 12 EATON MIL-DTL Series III Connectors and Cable Assemblies

13 Insert drawings 25-4 to Legend: = Not MIL-Standard = Main Key, Key Way Polarization Contact Size No. 8 (TWINAX) Front Face of Pin Insert Shown) No. 10 No. 12 No.16 No. 20 No. 22D Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts 8 No. 16 Contacts I No. 8 Contacts M No. 20 Contacts 9 No. 10 Contacts N No. 12 Contacts I Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts 13 No. 16 Contacts 4 No. 12 Contacts 3 No. 8 Contacts N No. 16 Contacts 12 No. 12 Contacts I No. 16 Contacts I No. 22D Contacts M Insert Arrangement: Quantity and Size: Service Rating: No. 20 Contacts 20 No. 16 Contacts I No. 20 Contacts 4 No. 16 Contacts 2 No. 8 Contacts I No. 20 Contacts I EATON MIL-DTL Series III Connectors and Cable Assemblies 13

14 Polarization tables K M Y W L X N Z Plugs Receptacles Polarization Table - Plug/Receptacle Shell Size 9 11,13,& thru 25 25L,33, & 37 Keyway ID Letter K W L X N A B C D E N A B C D E N A B C D E N A B C D E M Y N Z 14 EATON MIL-DTL Series III Connectors and Cable Assemblies

15 D38999/26 straight plugs, Eaton type G6 C Flat 1.22 Max. (30.99).20 Max. (5.08 mm).32 Min. (8.13 mm).09 Max. (2.29 mm) Ø B Ø A Dx 0.26 Max. (6.50 mm) J Thread Blue Color Band Shell Size ØA Max ØB Type G6 Plug Dec 29, 2015 C Flat J Thread (18.60) (21.80) (19.00) M12x1.0-6g-0.1R (21.31) (25.00) (21.90) M15x1.0-6g-0.1R (25.60) (29.40) (26.11) M18x1.0-6g-0.1R (28.91) (32.51) (29.31) M22x1.0-6g-0.1R (32.41) (35.71) (32.80) M25x1.0-6g-0.1R (35.10) (38.50) (35.51) M28x1.0-6g-0.1R (38.30) (41.70) (38.71) M31x1.0-6g-0.1R (41.30) (44.90) (41.71) M34x1.0-6g-0.1R (44.50) (48.01) (44.91) M37x1.0-6g-0.1R Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 15

16 D38999/20 wall-mount receptacles, Eaton type 00 L Typ. E Typ. F Typ Max. (31.75 mm) A Max. B 0.09 Max. (2.29 mm) 4X 0.07 (1.78 mm) K 60 Stub 3 Start Head Full Mate Indicator Red Color Band J Thread Blue Color Band Shell Size A B E F J Thread K Thread L ± (22.42) (2.50) (18.30) (15.10) M12 X 1.0-6g-0.1R P-.3L-2A (23.80) (22.42) (2.50) (20.62) (18.30) M15 X 1.0-6g-0.1R P-.3L-2A (26.21) (22.42) (2.50) (23.01) (20.62) M18 X 1.0-6g-0.1R P-.3L-2A (28.60) (22.42) (2.50) (24.61) (23.01) M22 X 1.0-6g-0.1R P-.3L-2A (31.01) (22.42) (2.50) (27.00) (24.61) M25 X 1.0-6g-0.1R P-.3L-2A (33.30) (22.42) (2.50) (29.36) (27.00) M28 X 1.0-6g-0.1R P-.3L-2A (36.50) (20.10) (3.20) (31.75) (29.36) M31 X 1.0-6g-0.1R P-.3L-2A (39.70) (20.10) (3.20) (35.00) (31.75) M34 X 1.0-6g-0.1R P-.3L-2A (42.90) (20.10) (3.20) (38.10) (35.00) M37 X 1.0-6g-0.1R P-.3L-2A (46.00) Dimensions are stated as inches (mm). 16 EATON MIL-DTL Series III Connectors and Cable Assemblies

17 D38999/24 jam-nut receptacles, Eaton type Max. (32.51 mm).89 Max. (22.61 mm) Hex Nut B.09 Max. (2.16 mm) J Thread D Flat A 4X.07 (1.78) K Thread Red Color Band (Full Mate Indicator) H Thread O-Ring L M E DETAIL A Scale 4 : 1 Shell Size B D Flat E L M H Thread J Thread K Thread O-Ring (2.90) (16.64) (27.41) (1.27) (2.51) M17 X 1.0-6g-0.100R M12 X 1.0-6g-0.1R P-.3L-2A (2.90) (19.18) (32.21) (1.27) (2.51) M20 X 1.0-6g-0.100R M15 X 1.0-6g-0.1R P-.3L-2A (2.90) (23.93) (35.31) (1.27) (2.51) M25 X 1.0-6g-0.100R M18 X 1.0-6g-0.1R P-.3L-2A (2.90) (27.08) (38.51) (1.27) (2.51) M28 X 1.0-6g-0.100R M22X 1.0-6g-0.1R P-.3L-2A (2.90) (30.25) (41.71) (1.27) (2.51) M32 X 1.0-6g-0.100R M25 X 1.0-6g-0.1R P-.3L-2A (3.71) (33.43) (46.41) (2.03) (3.71) M35 X 1.0-6g-0.100R M28 X 1.0-6g-0.1R P-.3L-2A (3.71) (36.60) (49.61) (2.03) (3.71) M38 X 1.0-6g-0.100R M31 X 1.0-6g-0.1R P-.3L-2A (3.71) (39.78) (52.81) (2.03) (3.71) M41 X 1.0-6g-0.100R M34 X 1.0-6g-0.1R P-.3L-2A (3.71) (42.95) (56.01) (2.03) (3.71) M44 X 1.0-6g-0.100R M37 X 1.0-6g-0.1R P-.3L-2A -134 Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 17

18 In-line receptacles, Eaton type Max. (31.50 mm) K Thread A Max. B 0.09 Max. (2.29 mm) 0.07 (1.78 mm) 4X Ø F Max. Red Color Band (Full Mate Indicator) V Thread Shell Size A Max B ØF Max K Thread V Thread (22.43) (2.50) (4.75) P-.3L-2A M12x1.0-6g-0.1R (22.43) (2.50) (7.01) P-.3L-2A M15x1.0-6g-0.1R (22.43) (2.50) (8.48) P-.3L-2A M18x1.0-6g-0.1R (22.43) (2.50) (10.26) P-.3L-2A M22x1.0-6g-0.1R (22.43) (2.50) (11.63) P-.3L-2A M25x1.0-6g-0.1R (20.10) (3.20) (13.30) P-.3L-2A M28x1.0-6g-0.1R (20.10) (3.20) (14.63) P-.3L-2A M31x1.0-6g-0.1R (20.10) (3.20) (16.43) P-.3L-2A M34x1.0-6g-0.1R (20.10) (3.20) (17.78) P-.3L-2A M37x1.0-6g-0.1R Dimensions are stated as inches (mm). 18 EATON MIL-DTL Series III Connectors and Cable Assemblies

19 Feed-through receptacles, Eaton type 05 A 1.93 Max. (49.02 mm) B 0.07 (1.78 mm) 4X C Flat Style A G Max. H 60 Stub 3 Start Thread Full Mate Indicator Red Color Band F Thread (O-Ring) H 60º Stub 3 Start Thread Shell Size A Max B C Flat F Thread G Max H Thread (25.02) (2.90) (16.64) M17x1.0-6g 0.100R (27.38) P-0.3L-2A (25.02) (2.90) (19.18) M20x1.0-6g 0.100R (32.21) P-0.3L-2A (25.02) (2.90) (23.93) M25x1.0-6g 0.100R (35.31) P-0.3L-2A (25.02) (2.90) (27.08) M28x1.0-6g 0.100R (38.51) P-0.3L-2A (25.02) (3.68) (30.25) M32x1.0-6g 0.100R (41.71) P-0.3L-2A (25.02) (3.68) (33.43) M35x1.0-6g 0.100R (46.41) P-0.3L-2A (25.02) (3.68) (36.60) M38x1.0-6g 0.100R (49.61) P-0.3L-2A (25.02) (3.68) (39.78) M41x1.0-6g 0.100R (52.81) P-0.3L-2A (25.02) (3.68) (42.95) M44x1.0-6g 0.100R (56.01) P-0.3L-2A Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 19

20 Wing-Lok plugs overview Designed for Fast and Repetitive Engagements in Harsh-Environment Applications Meets all MIL-DTL Series III physical and electrical requirements. High speed data including MIL-STD Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. Rugged coupling design will not demate or loosen due to shock or vibration. Shell-to-shell ground prior to contact engagement. 100% scoop-proof shell designs. -65 C to 200 C operating temperatures. Please contact customer service at to order products or receive additional information. Wing-Lok TM plugs incorporate ergonomic designs that significantly reduce the effort required for mating and demating. These non-slip-grip designs are especially beneficial while wearing gloves and when performing rapid and repetitive connector engagements. Wing-Lok plugs can be quickly customized to meet a broad array of mission-specific requirements: Special insert and shell configurations. Customer-defined EMI/RFI compliances. Custom connector/cable assemblies. Please refer to page 5 for additional capabilities. Standard Wing (W6 Shell) Harsh-Environment Design Features EMI ring Metal contact retainer clips Low-Profile (W6L Shell) Plastic and rubber materials survive 1000 hours extended heat without deforming. 20 EATON MIL-DTL Series III Connectors and Cable Assemblies

21 Wing-Lok plugs technical specifications Materials, Finish, and Mechanical Class C Class F Class G Class K Class T Class W Receptacle/Plug Shell and Coupling Ring Material 2024 Aluminum 2024 Aluminum 2024 Aluminum Corrosion Resistant Stainless Steel 2024 Aluminum 2024 Aluminum Receptacle /Plug Shell and Coupling Ring Plating Anodize Nickel per ASTM B733 Nickel per ASTM B733 Passivated Nickel Fluorocarbon Polymer CAD/OD per QQ-P-416 Contact Material & Plating Insulator Grommet and Seal Grounding Springs Mating Life Contact Retention Polarization Copper Alloy with Gold Plating, 50 Micro-Inches Minimum - All Finish Classes Hard Dielectric Wafer - All Finish Classes Fluorosilicone - All Finish Classes Beryllium Copper - All Finish Classes 500 Cycles Minimum - All Finish Classes Up to 25 Pounds - All Finish Classes Per MIL-STD Series III; N, A, B, C, D, and E - All Finish Classes Environmental, Shock, Vibration, and EMI/RFI Class C Class F Class G* Class K** Class T Class W Operating Temperature -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 175 C (-85 F to 347 F) -65 C to 175 C (-85 F to 347 F) Sealing Sand and Dust as per MIL-STD-202 and Ice Resistance - All Finish Classes Corrosion Resistance Withstands 500 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Fluid Immersion Sine Vibration Random Vibration Shock Various Fuels, Solvents, Coolants, and Oils as per EIA All Finish Classes 60g at Ambient Temperature - All Finish Classes 50G at Ambient Temperature with Simulated Accessory Load - All Finish Classes 300g +/- 15% Half-Sine-Wave Magnitude for 3 +/- 1mS - All Finish Classes EMI 100MHz No EMI Shielding > 90 db > 90 db > 80 db > 90dB > 90dB EMI 10GHz No EMI Shielding > 65 db > 65 db > 45 db > 50dB > 50dB Shell-to-Shell Conductivity 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop **Class G thermal vacuum outgassing: total mass loss 1.0%, collected volatile condensible material 0.1% maximum. **Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. EATON MIL-DTL Series III Connectors and Cable Assemblies 21

22 Wing-Lok plugs part-number configuration Part number configuration G3 WL6 W P N Wing-Lok Plugs Polarization (Table Below) Shell Wing Type (Table Below) Contact Style (Table Below) Finish Class (Table Below) Insert Arrangement (Page 23) Shell Size (Pages 23) Designator Descriptions Designator Type Eaton Description Shell Type Finish Class Contact Type W6 WL6 C F G K T W P S A B Full Wing Low-Profile Wing Anodize, -65 C to 200 C (-85 F to 392 F) Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) CRES (Passivated), -65 C to 200 C (-85 F to 392 F) Nickel Fluorocarbon Polymer, -65 C to 175 C (-85 F to 347 F) CAD/OD per QQ-P-41665, -65 C to 175 C (-85 F to 347 F) Pin Socket Pin, Non-Standard (Connector Shipped Without Contacts) Socket, Non-Standard (Connector Shipped Without Contacts) 22 EATON MIL-DTL Series III Connectors and Cable Assemblies

23 Wing-Lok connectors standard shell & insert configurations Please contact Eaton to discuss custom shells and inserts Shell Size Insert SR TTL 22D TWX Shell Size Insert SR TTL 22D TWX 9 35 M M I I II I M I I I M I II I I I M I M I II I M M I M M II SR = Service Rating. Insert drawings are located in the General Purpose Products section. TTL = The total number of contacts I M M I II M M I I II M I I I II I M N I N I I M I I I EATON MIL-DTL Series III Connectors and Cable Assemblies 23

24 Standard wings mechanical drawings 0.20 (5.08 mm) 1.32 (33.52 mm) 1.22 Max. (30.99 mm) 0.08 (2.03 mm) ØA ØC J Thread Blue Collar Band Shell Size ØA Max ØC Max J Thread (21.31) 2.57 (65.28) M15x1.0-6h 0.1R (25.60) 2.72 (69.09) M18x1.0-6h 0.1R (28.91) 2.87 (72.90) M22x1.0-6h 0.1R (32.41) 2.97 (75.44) M25x1.0-6h 0.1R (35.10) 3.09 (78.49) M28x1.0-6h 0.1R (38.30) 3.22 (81.79) M31x1.0-6h 0.1R (41.30) 3.34 (84.84) M34x1.0-6h 0.1R (44.50) 3.47 (88.14) M37x1.0-6h 0.1R Dimensions are stated as inches (mm). 24 EATON MIL-DTL Series III Connectors and Cable Assemblies

25 Low-profile wings mechanical drawings 1.22 Max. (30.99 mm) 0.20 (5.08 mm) 0.09 Max. (2.29 mm) ØA ØC Blue Color Band J Thread Shell Size ØA Max ØC Max J Thread (21.31) 1.80 (45.72) M15x1.0-6h 0.1R (25.60) 2.00 (50.80) M18x1.0-6h 0.1R (28.91) 2.10 (53.34) M22x1.0-6h 0.1R (32.41) 2.22 (56.39) M25x1.0-6h 0.1R (35.10) 2.33 (59.18) M28x1.0-6h 0.1R (38.30) 2.46 (62.48) M31x1.0-6h 0.1R (41.30) 2.58 (65.53) M34x1.0-6h 0.1R (44.50) 2.70 (68.58) M37x1.0-6h 0.1R Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 25

26 Filtered connectors overview Meets All Of the Shock and Vibration Requirements of MIL-DTL with No Deratings Configurations include shell sizes 9 to 25 and most insert arrangements. Rugged design survives 500 cycles of mating and demating. -55 C to 125 C operating temperatures. Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. Unique approach to planar-capacitor filtering facilitates high-density-connector designs. Standard options include platings rated for 500-hours, salt-spray exposure. Eaton s MIL-DTL Series III filtered connectors are designed to reduce EMI/RFI in a wide range of noise-sensitive applications such as avionics, communications, SIGINT, and ISR. These rugged connectors can be quickly modified to meet a broad array of mission-specific requirements: Filters optimized for any frequency, voltage, and impedance requirements. Special insert and shell configurations. Shielded connector/cable assemblies. Please refer to page 5 for additional capabilities. C, L, T and Pi-Type Filters are Available Box Mount C Filter Ground springs Encapsulation Pi Filter Ferrite beads Jam-Nut Mount Planar capacitors C Filter A rugged design enables meeting MIL-DTL shock and vibration requirements with no deratings. Pi Filter 26 EATON MIL-DTL Series III Connectors and Cable Assemblies

27 Filtered connectors technical specifications Materials, Finish, and Mechanical Class F Class K Class W Receptacle/Plug Shell and Coupling Ring Material 2024 Aluminum Corrosion Resistant Stainless Steel 2024 Aluminum Receptacle /Plug Shell and Coupling Ring Plating Nickel per ASTM B733 Passivated CAD/OD per QQ-P-416 Contact Material & Plating Insulator Grommet and Seal Grounding Springs Mating Life Contact Retention Polarization Copper Alloy with Gold plating, 50 Micro-Inches Mminimum - All Finish Classes Hard Dielectric Wafer - All Finish Classes Fluorosilicone - All Finish Classes Beryllium Copper - All Finish Classes 500 Cycles Minimum - All Finish Classes Up to 25 Pounds - All Finish Classes Per MIL-STD Series III; N, A, B, C, D, and E - All Finish Classes Environmental, Shock, Vibration, and EMI/RFI Class F Class K* Class W Operating Temperature -55 C to 125 C (-167 F to 257 F) -55 C to 125 C (-167 F to 257 F) -55 C to 125 C (-167 F to 257 F) Sealing Dust (Fine Sand) per MIL-STD-202 and Ice Resistance - All Finish Classes Corrosion Resistance 48 Hours Salt Spray 500 Hours Salt Spray 500 Hours Salt Spray Fluid Immersion Sine Vibration Random Vibration Shock Various Fuels, Solvents, Coolants, And Oils as per EIA All Finish Classes 60g at Ambient Temperature - All Finish Classes 50g at Ambient Temperature with Simulated Accessory Load - All Finish Classes 300g +/- 15% Half-Sine-Wave Magnitude for 3 +/- 1mS - All Finish Classes EMI Leakage Attenuation > MHz > 65 10GHz > MHz > 45 10GHz > MHz > 50 10GHz Shell-to-Shell Conductivity 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop 1.0 Millivolt Max. Drop *Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. EATON MIL-DTL Series III Connectors and Cable Assemblies 27

28 Filter performance graphs An estimate of insertion loss can be made using the following formula: Zs Z1 IL (db) = 20 log 1 + Zt (Zs + Z1) [ ] Zs = Source impedance in ohms Z1 = Load impedance in ohms Zt = Transfer impedance in 50 ohm system Please contact Eaton for L and T filter performance information. 28 EATON MIL-DTL Series III Connectors and Cable Assemblies

29 Filter types and attenuation ratings The C filter is a low inductance, feed-thru capacitor. It is used to attenuate high-frequency signals. The Pi filter consists of two capactive elements and one inductive element. The Pi filter provides better high-frequency performance than the C filter due to sharper roll-off and is designed for high source and load impedances. Electrical Ratings - Pi and C Filters Maximum operating voltage Current rating (RF) IR/DWV Dissipation factor 200VDC 3.0 amps minimum 20 Giga Ohms 500 VDC 2.5% maximum Pi Filter C Filter Capacitance Code C B A Capacitance Code C B A Capacitance (pf) Capacitance (pf) Frequency (MHz) db Attenuation db Attenuation db Attenuation Frequency (MHz) db Attenuation db Attenuation db Attenuation Attenuation Minimums per C Without Bias Voltage or Curent EATON MIL-DTL Series III Connectors and Cable Assemblies 29

30 Filtered connectors part number configuration Part number configuration G3 F2 W P N P - P A G3 Filtered Connectors Capacitance Code (Page 29) Shell Type (Table Below) Filter Type (Table Below) Finish Class (Table Below) Termination Type (Table Below) Shell Size (Page 31) Polarization (Page 14) Insert Arrangement (Page 31) Contact Style (Table Below) Designator Descriptions Designator Type Eaton Description Shell Type Finish Class Contact Style F2 F7 F K W P S C Box Mount Jam-Nut Mount Nickel per ASTM B733 CRES (Passivated) CAD/DD per QQ-P-416 Pin Socket Capacitive Filter Types L* One Capacitive and One Inductive Element P Pi Filter, One Capacitive and One Inductive Element T* Two Inductive and One Capacitive Element Temination Types P S PC Tails Solder Cup *Contact Eaton for L and T-Type filter specifications. 30 EATON MIL-DTL Series III Connectors and Cable Assemblies

31 Insert and shell arrangements Please contact Eaton to discuss custom shells and inserts Shell Size Insert SR TTL 22D Shell Size Insert SR TTL 22D M * 11 II I * 2 I * 3 II I M I I * 4 I M I * 5 II * 15 I I I M * 97 I I II I M * 99 I I M * 11 I * 16 II M * 39 I I * 21 II M I I * 97 I * 99 II I * 11 N * 19 I * 24 I * 29 I M * 43 I I SR = Service Rating. Insert drawings are located in the General-Purpose Products section. TTL = The total number of contacts. *Please contact factory for lead times. EATON MIL-DTL Series III Connectors and Cable Assemblies 31

32 Box-mount receptacles mechanical drawings A Max. B 0.59 Max. (14.99 mm) 0.25 (6.35 mm) L Typ. E Typ. F Typ. Box Mount, C-Filter A Max. B 1.06 Max. (26.92 mm) 0.25 (6.35 mm) X (1.78 mm) K Thread Box Mount, Pi-Filter Shell Size ØA Max ØB Max E F K Thread L ±.012 (0.30) (22.43) (2.49) (18.26) (15.09) P-.3L-2A (23.80) (22.43) (2.49) (20.62) (18.26) P-.3L-2A (26.21) (22.43) (2.49) (23.01) (20.62) P-.3L-2A (28.60) (22.43) (2.49) (24.61) (23.01) P-.3L-2A (31.01) (22.43) (2.49) (26.97) (24.61) P-.3L-2A (33.30) (22.43) (2.49) (29.36) (26.97) P-.3L-2A (36.50) (20.09) (3.20) (31.75) (29.36) P-.3L-2A (39.70) (20.09) (3.20) (34.93) (31.75) P-.3L-2A (42.90) (20.09) (3.20) (38.10) (34.93) P-.3L-2A (46.00) Dimensions are stated as inches (mm). 32 EATON MIL-DTL Series III Connectors and Cable Assemblies

33 Jam-nut receptacles mechanical drawings E 0.89 Max. (22.60 mm) 0.56 Max. (14.22 mm) 0.25 (6.35 mm) ø F Jam Nut, C-Filter 0.88 Max. (22.35 mm) 1.05 Max. (26.67 mm) 0.25 (6.35 mm) Jam Nut, Pi-Filter Shell Size E Ø F (27.41) (56.01) (29.67) (35.20) (35.31) (38.40) (38.51) (41.61) (41.71) (44.81) (46.38) (49.50) (49.61) (52.71) (52.81) (55.91) (56.01) (59.00) Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 33

34 Hermetic connectors overview Hermetic Connectors for Applications Ranging From Submarines to Spacecraft Configurations include shell sizes 9 to 25 and most insert arrangements. Rugged designs survive 500 cycles of mating and demating. Proven performance at -65 C to 200 C operating temperatures. Quick mating, tri-start, self-locking couplings. No Helium leakage greater than 1 E-7 CC/S per EIA Eaton s Series III hermetic connectors are designed for use in pressurized or environmentally-sealed applications. These rugged products provide the same wide range of features offered by Eaton s non-hermetic Series III connectors. Eaton s Series III hermetic connectors can be quickly customized to meet a broad array of mission-specific requirements: Shell and seal materials optimized for specific environmental conditions. Special insert patterns. Custom connector/cable assemblies. Please refer to page 5 for additional capabilities. Box-Mount Receptacles Weld-Mount Receptacles Harsh-Environment Design Features Hermetic glass seal PC tail, solder cup, or eyelet terminations Solder-Mount Receptacles Jam-Nut Receptacles Fluorosilicone interfacial seal Stainless-steel shell 34 EATON MIL-DTL Series III Connectors and Cable Assemblies

35 Hermetic connectors technical specifications Materials, Finish, and Mechanical Class N Class Y Shell Stainless Steel Stainless Steel Receptacle /Plug Shell and Coupling Ring Plating Nickel Plate per ASTM B733 Passivated per SAE-AMS-QQ-P-35 Contact Type Pin Only Pin Only Contact Material and Plating Copper Alloy with Gold Plating, 50 Micro-Inches Minimum Copper Alloy with Gold Plating, 50 Micro-Inches Minimum Insulator Hard Dielectric Wafer Hard Dielectric Wafer Grommet and Seal Fluorosilicone and Hermetic Glass Fluorosilicone and Hermetic Glass Grounding Springs Beryllium Copper Beryllium Copper Mating Life 500 Cycles Minimum 500 Cycles Minimum Contact Retention Up to 25 Pounds Up to 25 Pounds Polarization Per MIL-STD Series III; N, A, B, C, D, and E Per MIL-STD Series III; N, A, B, C, D, and E Environmental, Shock, Vibration, and EMI/RFI Class N Class Y Operating Temperature -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) Sealing No Helium Leakage Greater than 1.0E-7 CC/S per EIA All Finish Classes Corrosion Resistance Withstands 48 Hours Salt Spray Withstands 500 Hours Salt Spray Fluid Immersion Sine Vibration Random Vibration Shock Various Fuels, Solvents, Coolants, and Oils as per EIA All Finish Classes 60g at Ambient Temperature - All Finish Classes 50G at Ambient Temperature with Simulated Accessory Load - All Finish Classes 300g +/- 15% Half-Sine-Wave Magnitude for 3 +/- 1mS - All Finish Classes EMI Leakage Attenuation > > 10GHz > > 10GHz Shell-to-Shell Conductivity 1.0 Millivolt Maximum Drop 2.5 Millivolt Maximum Drop EATON MIL-DTL Series III Connectors and Cable Assemblies 35

36 Hermetic connectors part number configuration Part number configuration G3 H7 N P N G3 Hermetic Connectors Polarization (Page 14) Shell Type (Table Below) Contact Style (Table Below) Class (Table Below) Insert Arrangement (Page 37) Shell Size (Pages 37) G3-Series hermetic connectors are designed to meet all MIL-DTL requirements. Designator Cross References Designator Type Military Eaton Description MIL-DTL-38999/25 H1 Solder-Mount Receptacle Shell Types MIL-DTL-38999/21 H2 Box-Mount Receptacle MIL-DTL-38999/27 H4 Weld-Mount Receptacle MIL-DTL-38999/23 H7 Jam-Nut-Mount Receptacle Finish Classes N N Nickel Plated, -65 C to 200 C (-85 F to 392 F) Y Y Passivated, -65 C to 200 C (-85 F to 392 F) C C PC Tails Contact Types P P Pin with Solder Cup X X Pin with Eyelet 36 EATON MIL-DTL Series III Connectors and Cable Assemblies

37 Hermetic connectors standard shell and insert configurations Shell-Size Conversions Military Designation A B C D E F G H J Shell Size & Eaton Designation Please contact Eaton to discuss custom shells and inserts Shell Size Insert SR TTL 22D Shell Size Insert SR TTL 22D M II I I I II I M I I I M I II I I I M I I II I M I M I II M I I II M I I I II I N I I I M I I SR = Service Rating. Insert drawings are located in the General Purpose Products section. TTL = The total number of contacts. EATON MIL-DTL Series III Connectors and Cable Assemblies 37

38 Jam-nut hermetic receptacles mechanical drawings øe øm Jam Nut Receptacles Shell Size A Max B Flat ØE G Thread L Max ØM P S Max W Z Max (30.51) (16.54) (15.29) M17X1-6g 0.100R (9.09) (15.62) (14.10) (27.41) (2.59) (29.21) (35.20) (19.08) (18.39) M20X1-6g 0.100R (9.09) (18.72) (14.10) (32.21) (2.59) (29.21) (38.40) (23.83) (21.59) M25X1-6g 0.100R (9.09) (21.92) (14.30) (35.31) (2.59) (29.31) (41.61) (26.97) (24.79) M28X1-6g 0.100R (9.09) (25.12) (14.30) (38.51) (2.59) (29.31) (44.81) (30.15) (27.99) M32X1-6g 0.100R (9.09) (28.32) (14.30) (41.71) (2.59) (29.31) (49.50) (33.32) (31.19) M35X1-6g 0.100R (9.70) (31.52) (14.30) (46.41) (3.40) (30.10) (52.71) (36.50) (34.29) M38X1-6g 0.100R (9.70) (34.62) (14.30) (49.61) (3.40) (30.10) (55.91) (39.67) (37.49) M41X1-6g 0.100R (9.70) (37.82) (14.30) (52.81) (3.40) (30.10) (59.00) (42.85) (40.69) M44X1-6g 0.100R (9.70) (41.02) (14.30) (56.01) (3.40) (30.10) Dimensions are stated as inches (mm). 38 EATON MIL-DTL Series III Connectors and Cable Assemblies

39 Box-mount hermetic receptacles mechanical drawings Box Mount Receptacles Shell Size A Thread B SQ C BSC D BSC E F P-.3L-TS-2A (23.80) (18.26) (15.09) (3.25) (5.49) P-.3L-TS-2A (26.19) (20.62) (18.26) (3.25) (4.93) P-.3L-TS-2A (28.60) (23.01) (20.62) (3.25) (4.93) P-.3L-TS-2A (30.99) (24.61) (23.01) (3.25) (4.93) P-.3L-TS-2A (33.30) (26.97) (24.61) (3.25) (4.93) P-.3L-TS-2A (36.50) (29.36) (26.97) (3.25) (4.93) P-.3L-TS-2A (39.70) (31.75) (29.36) (3.25) (4.93) P-.3L-TS-2A (42.90) (34.93) (31.75) (3.91) (6.15) P-.3L-TS-2A (46.00) (38.10) (34.93) (3.91) (6.15) Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 39

40 Solder-mount hermetic receptacles mechanical drawings Solder Mount Receptacles Shell Size F Max L Max S Max V Max With Pins V Max With Sockets Z Max (17.09) (5.11) (19.41) (17.20) (19.41) (23.80) (19.89) (5.11) (21.79) (17.20) (19.41) (23.80) (23.09) (5.11) (24.89) (17.20) (19.41) (23.80) (26.19) (5.11) (28.09) (17.20) (19.41) (23.80) (29.39) (5.11) (31.29) (17.20) (19.41) (23.80) (31.80) (5.11) (33.60) (17.20) (19.41) (23.80) (35.00) (5.11) (36.80) (17.20) (19.41) (23.80) (38.20) (5.89) (40.01) (17.20) (19.41) (24.61) (41.30) (5.89) (43.21) (17.20) (19.41) (24.61) Dimensions are stated as inches (mm). 40 EATON MIL-DTL Series III Connectors and Cable Assemblies

41 Weld-mount hermetic receptacles mechanical drawings Weld Mount Receptacles Shell Size S T W (24.69) (23.90) (3.20) (27.79) (27.00) (3.20) (30.99) (30.20) (3.20) (34.19) (33.40) (3.20) (36.40) (35.61) (3.20) (40.11) (39.29) (3.20) (43.69) (42.90) (3.20) (47.90) (47.09) (3.99) (50.09) (49.30) (3.99) Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 41

42 Lanyard connectors overview The Industry s Most Durable MIL-DTL Lanyard-Release Connectors Eaton s MIL-DTL Series III lanyard-release connectors are available in QPL and modified and single and dualrelease configurations. These rugged connectors employ all the same features as Eaton s general purpose Series III plugs and provide the same high levels of quality, performance, and durability. Solutions include MIL-STD-1760 mechanical release including umbilical release and staging. Finish Class K configurations provide 2000 F firewall protection for 20 minutes minimum. 360 grounding fingers provide up to 65dB protection at 10GHz. -65 C to 200 C operating temperatures. Finish options include 500 hour salt-spray-rated platings. Eaton s lanyard-release connectors can be quickly customized to meet a broad array of mission-specific requirements: Adjustable-length lanyards as depicted above. Application-specific lanyard lengths. Low-force (40 90 pound) release mechanisms. Redundant releases as described below. MIL-DTL-38999/31 Type 6 lanyard connectors. Please refer to page 5 for additional capabilities. MIL-DTL-38999/29 and /30 QPL MIL-DTL-38999/31 Type 4 QPL MIL-DTL-38999/31 Type 1 QPL This redundant release lanyard connector utilizes Series III compliant coupling threads and supports low-pull force, off-axis releases. Please contact Eaton for additional information MIL-DTL-38999/36 Modified 42 EATON MIL-DTL Series III Connectors and Cable Assemblies

43 22 Degree off-axis-pull capabilities outperform MIL-DTL requirements 100 Off-Angle Snatch Releases at Under 100-Pounds Separation Force Eaton s MIL-DTL Series III lanyard-release connectors provide low-force separations at ambient and low temperatures, increased off-axis separation capabilities in all four quadrants, and are not sensitive to new receptacles. This industry-leading performance has been documented in rigorous testing that included 100 off-angle snatch releases. Test results confirmed: Maximum ambient-temperature separation forces of 91 pounds in all four quadrants at 22 off axis. Almost no change in separation forces at -65 C in all four quadrants at 0 and 15 degrees off-axis. Design & Materials Exceed MIL-DTL Specifications Industry-Leading Performance Plastic coated, seven strand, stainless-steel cable rated to 500 lbs Lanyard cinch pull rated to 500 lbs Precision machined snatch-release components Aluminum-alloy construction, combined with anti-binding and roll-off features, increases reliability and extends service life. Teflon coated internal threaded segments Eaton s connectors reliably release at up to 22 degrees off-angle pull with less than 100 pounds of separation force. MIL-DTL fifteen-degree range is the maximum off-angle pull that competitors products can typically accommodate. EATON MIL-DTL Series III Connectors and Cable Assemblies 43

44 Lanyard connectors technical specifications Materials, Finish, and Mechanical Class C Class F Class G Class K Class T Class W Receptacle/Plug Shell and Coupling Ring Material 2024 Aluminum 2024 Aluminum 2024 Aluminum Corrosion Resistant Stainless Steel 2024 Aluminum 2024 Aluminum Receptacle /Plug Shell and Coupling Ring Plating Anodize Nickel per ASTM B733 Nickel per ASTM B733 Passivated Nickel Fluorocarbon Polymer CAD/OD per QQ-P-416 Contact Material & Plating Insulator Grommet and Seal Grounding Springs Mating Life Contact Retention Polarization Copper Alloy with Gold Plating, 50 Micro-Inches Minimum - All Finish Classes Hard Dielectric Wafer - All Finish Classes Fluorosilicone - All Finish Classes Beryllium Copper - All Finish Classes 500 Cycles Minimum - All Finish Classes Up to 25 Pounds - All Finish Classes Per MIL-STD Series III; N, A, B, C, D, and E - All Finish Classes Environmental, Shock, Vibration, and EMI/RFI Class C Class F Class G* Class K Class T Class W Operating Temperature -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 200 C (-85 F to 392 F) -65 C to 175 C (-85 F to 347 F) -65 C to 175 C (-85 F to 347 F) Sealing Sand and Dust as per MIL-STD-202 and Ice Resistance - All Finish Classes Corrosion Resistance Withstands 500 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 48 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Withstands 500 Hours Salt Spray Fluid Immersion Sine Vibration Random Vibration Shock Various Fuels, Solvents, Coolants, and Oils as per EIA All Finish Classes 60g at Ambient Temperature - All Finish Classes 50G at Ambient Temperature with Simulated Accessory Load - All Finish Classes 300g +/- 15% Half-Sine-Wave Magnitude for 3 +/- 1mS - All Finish Classes EMI 100MHz No EMI Shielding > 90 db > 90 db > 80 db > 90dB > 90dB EMI 10GHz No EMI Shielding > 65 db > 65 db > 45 db > 50dB > 50dB Shell-to-Shell Conductivity 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 1.0 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop 2.5 Millivolt Max. Drop *Class G thermal vacuum outgassing: total mass loss 1.0%, collected volatile condensible material 0.1% maximum. 44 EATON MIL-DTL Series III Connectors and Cable Assemblies

45 Lanyard connectors part number configuration MIL-DTL part number D38999/ 29 W J 35 E N 1 Eaton part number G3 L6 W P N Z -000 MIL-DTL Series III Specification Type Number (Table Below) G3 Lanyard-Release Connectors Modification Code Shell Type (Table Below) Polarization (Page 14) Shell Type (Table Below) Lanyard Length (Page 46) Finish Class (Table Below) Lanyard Length (Page 46) Finish Class (Table Below) Polarization (Page 14) Shell Size (Page 46) Insert Arrangement (Page 46) Shell Size (Page 46) Contact Style (Table Below) Insert Arrangement (Page 46) Designator Descriptions Designator Type Military Eaton Description MIL-DTL-38999/29 L6 EMI Lanyard Plug Pin Only MIL-DTL-38999/30 L6 EMI Lanyard Plug Socket Only Shell Type MIL-DTL-38999/31 Type 1 L6 Mod 089 EMI Lanyard Plug Pin Only (Shell Size 25) MIL-DTL-38999/31 Type 4 L6 Mod 091 EMI Lanyard Plug Pin Only (Shell Size 25) MIL-DTL-38999/31 Type 6 L6 Mod Contact Eaton to discuss / 31 Type 6 applications MIL-DTL-38999/36 L6 Mod Contact Eaton to discuss / 36 applications Finish Class C C Anodize, -65 C to 200 C (-85 F to 392 F) F F Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) G G Nickel per ASTM B733, -65 C to 200 C (-85 F to 392 F) K K CRES (Passivated), -65 C to 200 C (-85 F to 392 F) T T Nickel Fluorocarbon Polymer, -65 C to 175 C (-85 F to 347 F) W W* CAD/OD per QQ-P-41665, -65 C to 175 C (-85 F to 347 F) P P Pin Contact Style S S Socket A A Pin, Non-Standard (Connector Shipped Without Contacts) *Finish class W configurations are QPL certified. B B Socket, Non-Standard (Connector Shipped Without Contacts) EATON MIL-DTL Series III Connectors and Cable Assemblies 45

46 Lanyard lengths & shell/insert arrangements Lanyard Length Codes* Code Length Code Length Code Length Code Length A G M U B H N V C I P W D J R X E K S Y F L T Z *Lengths are +/ inches Shell-Size Conversions Military Designation A B C D E F G H J Shell Size & Eaton Designation Lanyard connector, standard shell and insert configurations Short and long-profile lanyards are only available in shell size 25. Please contact Eaton to discuss custom shells and inserts. Shell Size Insert SR TTL 22D TWX Shell Size Insert SR TTL 22D TWX 17 2 M M I I II N I M M I M II M I M I II M II M I I M N I N I I M I I I SR = Service Rating. Insert drawings are located in the General Purpose Products section. TTL = The total number of contacts. 46 EATON MIL-DTL Series III Connectors and Cable Assemblies

47 D38999/29 & 30 mechanical drawings D Thread 1.46 (37.08 mm) 1.10 Max. (27.94 mm) Ø 0.56 (14.22 mm) Ø C Max. Ø B Max. Ø A Max Max. (3.81 mm) Blue Color Band Lanyard Length Eaton Shell Type L6 Shell Size ØA Max ØB Max ØC Max D Thread (55.98) (39.50) (30.48) M25x1.0-6g-0.1R (59.18) (41.28) (33.27) M28x1.0-6g-0.1R (62.79) (45.09) (36.83) M31x1.0-6g-0.1R (65.89) (47.37) (39.37) M34x1.0-6g-0.1R (68.68) (50.67) (42.49) M37x1.0-6g-0.1R Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 47

48 D38999/31 type 4 mechanical drawings Lanyard Length 1.81 Max. (45.97 mm) Blue Color Band M37X1.0-6g-0.1R Thread 0.28 Min. Thd. (7.11 mm) Ø 0.56 (14.22 mm) Ø 2.00 (50.80 mm) Ø 1.67 (42.42 mm) 0.20 (5.08 mm) Eaton Shell Type L6, Mod 091, Shell Size 25 Dimensions are stated as inches (mm). 48 EATON MIL-DTL Series III Connectors and Cable Assemblies

49 D38999/31 type 1 mechanical drawings Lanyard Length Blue Color Band M37X1.0-6g-0.1R Thread 2.50 Max. (63.50 mm) Ø 2.00 (50.8) Ø 0.56 (14.22 mm) Ø 1.67 Max. (42.42 mm) 0.37 Max. (9.40 mm) Eaton Shell Type L6, Mod 089, Shell Size 25 Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 49

50 Printed-circuit-board contact terminations PC Tail Contact Terminations Solder Directly to Printed Circuit Boards Available on all MIL-DTL Series III connectors for contacts from size 22D through size 12. Contact material: Copper alloy per QQ-C-530. Contact finish: Gold plate per MIL-G-45204, Type II, Grade C, Class 1 over Nickel per QQ-N-290. Mating portions of pin per MIL-C-39029/58 and socket per MIL-C-39029/56 as applicable. Solders directly to printed-circuit boards using standard through-hole-soldering processes. Printed Circuit Contacts - Socket B C REF. ØA GROMMET FACE Contact Size Part Number ØA B C 22d (0.67) (5.16) (1.19) 22d (0.51) (3.25) (1.12) 22d (0.48) (3.18) (1.02) 22d (0.67) (2.87) (1.19) 22d (0.67) (5.16) (5.84) 22d (0.51) (5.16) (5.84) 22d (0.51) (4.52) (2.92) 22d (0.44) (3.30) (1.70) 22d (0.67) (3.91) (0.48) 22d (0.48) (5.16) (1.30) (0.67) (0.58) (1.19) (0.51) (3.25) (1.12) (0.51) (4.52) (2.92) (0.64) (5.46) (4.27) (0.75) (4.52) (2.92) (0.75) (4.52) (2.92) Dimensions are stated as inches (mm). 50 EATON MIL-DTL Series III Connectors and Cable Assemblies

51 Ordering information How to Order Hermetic Connectors Filtered Connectors All Other Connectors Select the C Termination Option when Configuring the Part Number. Select the P Termination Option when Configuring the Part Number. Order Pins and Sockets Using the Part Numbers in the Corresponding Tables. Printed Circuit Contacts - Pin B C REF. ØA GROMMET FACE Contact Size Part Number ØA B C 22d P (0.67) (4.75) (1.65) 22d (0.48) (7.24) (4.42) 22d (0.46) (4.06) (6.93) 22d (0.67) (4.06) (6.93) 22d P (0.67) (5.16) (1.19) 22d (0.51) (6.35) (8.33) 22d (0.69) (3.91) (0.48) 22d P (0.69) (3.68) (1.65) 22d P (0.67) (6.35) (1.47) (0.67) (4.75) (1.65) (0.48) (7.24) (3.15) P (0.67) (3.68) (1.65) P (0.67) (4.75) (1.65) P (0.67) (6.35) (1.47) P (1.27) (3.68) (0.71) P (1.27) (3.68) (1.65) P (1.27) (3.68) (1.65) Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 51

52 NASA Thread Coupling (NATC) connectors Meets All of the Requirements of NASA Specification SSQ standard contact patterns including bussed contact configurations. Interchangeable with MIL-DTL Series III shell sizes 9 to C to 200 C operating temperatures. High speed data including MIL-STD Shell-housing ground prior to contact engagement. Coupling nut anti-rotation system eliminates lock wires. Eaton s NATC connectors utilize space-rated materials to meet all of the requirements of NASA Specification SSQ These space-rated connectors can be quickly customized to meet a broad array of mission-specific requirements: Thermal and electrical deadfaces. Special insert patterns and shell configurations. Please refer to page 5 for additional capabilities. Power configurations based on MIL-DTL-5015 inserts in shell sizes 25L to 37. Straight Plugs Harsh-Environment Design Features Jam-Nut Receptacles EMI ring Metal contact retainer clips Wall-Mount Receptacles Plastic and rubber materials survive 1000 hours extended heat without deforming. 52 EATON MIL-DTL Series III Connectors and Cable Assemblies

53 NATC connectors technical specifications Materials, Finish, and Mechanical Shell Receptacle /Plug Shell and Coupling Ring Plating Contact Material and Plating Insulator Grommet and Seal Grounding Springs Mating Life Contact Retention Polarization Stainless Steel Electroless Nickel Copper Alloy with Gold Plating, 50 Micro-Iinches Minimum Hard Dielectric Wafer Fluorosilicone Beryllium Copper 500 Cycles Minimum Up to 25 Pounds Per MIL-STD Series III; N, A, B, C, D, and E Environmental, Shock, Vibration, and EMI/RFI Operating Temperature Sealing Corrosion Resistance Fluid Immersion Sine Vibration Random Vibration Shock EMI Leakage Attenuation Shell-to-Shell Conductivity -115 C to 200 C (-175 F to 392 F) Sand and Dust as per MIL-STD-202 and Ice Resistance Withstand 500 Hours Salt Spray Various Fuels, Solvents, Ccoolants, and Oils as per EIA Per MIL-STD-202, Method 204, Condition G +6 db/octave 20Hz to 100Hz; 1g 2 Hz; 100Hz to 2KHz 75g, 11 ms Half-Sine, each Axis 90dB at 100MHz and 65dB Through 10GHz 1.0 Millivolt Maximum Drop Space-rated Series III solutions include dual-release lanyards designed to support critical spacecraft events. Contact Eaton for additional dual-release-lanyard information. EATON MIL-DTL Series III Connectors and Cable Assemblies 53

54 NATC connectors part number configuration NATC Part Number NATC 06 G 11 N 35 P A Eaton Part Number SG3 06 F P N NASA Threaded Coupling Connector Shell Polarization (Page 14) SG3 NATC Connectors Shell Polarization (Page 14) Shell Type (Table Below) Contact Style (Table Below) Shell Type (Table Below) Contact Style (Table Below) Class: G = EMI - Grounding T = Environment Resisiting Insert Arrangement (Page 55) Class & Finish (Electroless Nickel) Insert Arrangement (Page 55) Shell Size (Page 55) Finish (Electroless Nickel) Shell Size (Page 55) Designator Cross References Designator Type NATC Eaton Description Wall-Mount Receptacle Shell Types Plug Jam-Nut Receptacle Classes G N/A EMI Grounding T N/A Environment Resisting Finish N F Electroless Nickel Contact Types P P Pin S S Socket 54 EATON MIL-DTL Series III Connectors and Cable Assemblies

55 NATC connectors standard shell and insert configurations Shell-Size Conversions Military Designation A B C D E F G H J Shell Size & Eaton Designation Please contact Eaton to discuss custom shells and inserts Shell Size Insert SR TTL 9 35 M D I M I I I M I I II I M I I M I II I M I II I I M I I I II M TWX SR = Service Rating. Insert drawings are located in the general-purpose products section. Please contact Eaton for any NATC-specific configurations that are not included on the insert-drawings pages. TTL = The total number of contacts. Shell Size Insert SR TTL I I D TWX 8 PWR N II I II M I I L 7 II M I N I I M I I I I II II II I II 4 4 EATON MIL-DTL Series III Connectors and Cable Assemblies 55

56 NATC plugs C Flat D X 0.26 (6.64 mm) S R P 0.31 Min.* (7.87 mm) 0.09 Max. (2.29 mm) Ø A Ø F Ø B Blue Color Band 0.28 Min.** (7.11 mm) Full Threads L Thread NOTES: *NOT APPLICABLE FOR SHELL SIZES 2L TO 37 **NOT APPLICABLE FOR SHELL SIZES 33 & 37 Shell Size ØA Max ØB Max C Flat Max ØF Max L Thread P Max R Max S Max (18.62) (21.82) (19.00) (10.57) M12 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (21.29) (24.61) (21.84) (13.56) M15 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (25.63) (28.98) (26.01) (16.56) M18 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (28.88) (32.23) (29.26) (20.57) M22 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (32.36) (35.33) (32.74) (23.57) M25 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (35.08) (38.10) (35.46) (26.57) M28 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (38.30) (41.28) (38.68) (29.57) M31 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (41.28) (44.45) (41.66) (32.56) M34 X 1.0-6g-0.100R (14.91) (21.34) (31.01) (44.50) (47.63) (44.88) (35.56) M37 X 1.0-6g-0.100R (14.91) (21.34) (31.01) 25L (46.96) (47.63) (44.88) (35.56) M37 X 1.0-6g-0.100R (21.46) (28.60) (65.51) (55.07) (44.45) (53.06) (42.80) M45 X 1.0-6g-0.100R (24.26) (31.93) (65.51) (59.89) (60.73) (57.76) (47.24) M50 X 1.0-6g-0.100R (24.26) (31.93) (65.51) Dimensions are stated as inches (mm). 56 EATON MIL-DTL Series III Connectors and Cable Assemblies

57 NATC wall-mount receptacles 2XL 2XE Blue Color Band V A B Ø T 4 XF H 60 Stub 3 Start Thread Full Mate Indicator Red Color Band G Thread Blue Color Band Shell Size A Max B Max E Max ØF Max G Thread H Thread L Max V Max ØT Max (20.90) (2.44) (18.26) (3.45) M12 X 1.0-6g-0.100R P-.3L-TS (24.08) (31.50) (10.57) (20.90) (2.44) (20.62) (3.45) M15 X 1.0-6g-0.100R P-.3L-TS (26.44) (31.50) (13.56) (20.90) (2.44) (23.01) (3.45) M18 X 1.0-6g-0.100R P-.3L-TS (28.83) (31.50) (16.56) (20.90) (2.44) (24.61) (3.45) M22 X 1.0-6g-0.100R P-.3L-TS (31.22) (31.50) (20.57) (20.90) (2.44) (26.97) (3.45) M25 X 1.0-6g-0.100R P-.3L-TS (33.58) (31.50) (23.83) (20.90) (2.44) (29.36) (3.45) M28 X 1.0-6g-0.100R P-.3L-TS (36.78) (31.50) (26.57) (20.09) (3.20) (31.75) (3.45) M31 X 1.0-6g-0.100R P-.3L-TS (39.93) (31.50) (29.57) (20.09) (3.20) (34.93) (4.11) M34 X 1.0-6g-0.100R P-.3L-TS (43.13) (31.50) (32.56) (20.09) (3.20) (38.10) (4.11) M37 X 1.0-6g-0.100R P-.3L-TS (46.28) (31.50) (35.53) 25L (29.49) (5.16) (38.10) (4.11) M37 X 1.0-6g-0.100R P-.3L-TS (46.18) (66.04) (35.53) (29.49) (5.16) (44.45) (5.51) M45 X 1.0-6g-0.100R P-.3L-TS (58.88) (66.04) (42.77) (29.49) (5.16) (48.82) (5.51) M50 X 1.0-6g-0.100R P-.3L-TS (75.95) (66.04) (47.24) Dimensions are stated as inches (mm). EATON MIL-DTL Series III Connectors and Cable Assemblies 57

58 NATC jam-nut receptacles V Max. 2X J Max. Full Mate Indicator Red Color Band A Max. B Max (3.05 mm) Flat O-Ring H 60 Stub 3 Start Thread R Max. Flat ØM Max. T Max. Blue Color Band (4 PL) F Thread ØS G Thread Max (7.11mm) Min.** Full THD NOTES: *NOT APPLICABLE FOR SHELL SIZES 25L TO 37 **NOT APPLICABLE FOR SHELL SIZES 33 & 37 Shell Size A Max B Max F Thread G Thread H Thread J Max V Max ØM Max R Flat ØS Max T Max (31.39) (2.90) M17 X 1.0-6g-0.100R M12 X 1.0-6g-0.100R P-.3L-TS (27.36) (42.93) (19.89) (16.64) (17.73) (16.94) (31.39) (2.90) M20 X 1.0-6g-0.100R M15 X 1.0-6g-0.100R P-.3L-TS (32.13) (42.93) (24.66) (19.18) (20.90) (19.48) (31.57) (2.90) M25 X 1.0-6g-0.100R M18 X 1.0-6g-0.100R P-.3L-TS (35.31) (42.93) (27.84) (23.93) (25.63) (24.23) (31.57) (2.90) M28 X 1.0-6g-0.100R M22 X 1.0-6g-0.100R P-.3L-TS (38.48) (42.93) (31.01) (27.08) (28.83) (27.46) (31.57) (2.90) M32 X 1.0-6g-0.100R M25 X 1.0-6g-0.100R P-.3L-TS (41.66) (42.93) (34.19) (30.25) (32.21) (30.56) (31.57) (3.68) M35 X 1.0-6g-0.100R M28 X 1.0-6g-0.100R P-.3L-TS (46.41) (42.93) (36.93) (33.43) (35.28) (33.73) (31.57) (3.68) M38 X 1.0-6g-0.100R M31 X 1.0-6g-0.100R P-.3L-TS (49.61) (42.93) (40.13) (36.60) (38.28) (36.91) (31.57) (3.68) M41 X 1.0-6g-0.100R M34 X 1.0-6g-0.100R P-.3L-TS (52.76) (42.93) (43.31) (39.78) (41.50) (40.06) (31.57) (3.68) M44 X 1.0-6g-0.100R M37 X 1.0-6g-0.100R P-.3L-TS (55.96) (42.93) (46.48) (42.95) (44.70) (43.26) 25L (39.01) (5.03) M44 X 1.0-6g-0.100R M37 X 1.0-6g-0.100R P-.3L-TS (55.96) (66.04) (46.48) (42.95) (44.70) (43.26) (39.01) (5.03) M52 X 1.0-6g-0.100R M45 X 1.0-6g-0.100R P-.3L-TS (63.09) (66.04) (52.78) (48.95) (50.27) (49.25) (39.01) (5.03) M60 X 1.0-6g-0.100R M50 X 1.0-6g-0.100R P-.3L-TS (72.21) (66.04) (62.38) (57.81) (60.27) (58.37) Dimensions are stated as inches (mm). 58 EATON MIL-DTL Series III Connectors and Cable Assemblies

59 Assembly instructions and tools Crimp Tools and Positioners Contact Style Contact Size Crimp Tool Part Number Positioner Part Number 22D M22520/2-01 M22520/2-09 Contact Style Contact Size Crimp Tool Part Number Positioner Part Number 22D M22520/2-01 M22520/2-07 Pin 20 M22520/1-01 M22520/ M22520/1-01 M22520/1-04 Socket 16 M22520/1-01 M22520/ M22520/1-01 M22520/ M22520/1-01 M22520/ M22520/1-01 M22520/1-04 Contact Eaton for Power-Breech contact-tool information. Wire stripping Strip insulation from end of wire to be crimped. Do not cut or damage wire strands. Contact crimping 1. Insert stripped wire into contact crimp pot. Wire must be visible through inspection hole. 2. Using correct crimping tool and locator. Cycle the tool once to be sure the indenters are open. Insert contact and wire into locator. Squeeze tool handle firmly and completely to insure a proper crimp. The tool will not release unless the crimp indenters of tool is fully actuated. 3. Release crimped contact and wire from tool. Inspect the wire to be certain wire is visible through inspection hole in contact. Contact insertion 1. Insert wire into the insertion tool. Contact extraction 2. Slide insertion tool to the shoulder of the contact. 3. Stop insertion tool at the shoulder of the contact. 4. Use isopropyl alcohol to lubricate the grommet seal. Insert contact through grommet seal and wiggle until the contact locks in retainer clip. 1. Insert wire into insertion tool. 2. Use isopropyl alcohol to lubricate the grommet seal. Slide insertion tool along wire into grommet seal. 3. Press the insertion tool until seated firmly. Pull wire and insertion tool out to remove contact. EATON MIL-DTL Series III Connectors and Cable Assemblies 59