Power Board to Board Connector
|
|
|
- Michael Jennings
- 5 years ago
- Views:
Transcription
1 Power oard to oard onnector PD Series OUTLINE PD series is a board to board connector for high current power supply units which combines power and signal contacts. FETURE ontact is highly reliable connection due to the fork-shaped three-pointed contact design and independent from the housing. Offset the gap between two connectors. Mounting on P is applied press-fit contact (eyelet type) for low insertion force. ontacts are independent from the housing PPLITIONS Housing Guide:.mm High-end Server, Strage, Networking Offset the gap when mating SPEIFITIONS Rated Voltage 100V D Rated urrent 10 / Power ontact 1.5 / Signal ontact Dielectric Withstanding Voltage 1000 Ｖ (r.m.s.) / １ minute Insulation Resistance 1000M Ω min. at 500V D 1.0m Ω max.(power ontact) ontact Resistance Power ontact(6 /1) Signal ontact(78 / 99) Operating Temperature range Operating humidity range 95% Rh max.( However, there must not be dewy.) Preservation temperature Preservation humidity 95% Rh max. MTERIL / FINISH Item Housing ontact oard Lock m Ω max.(signal ontact) RoHS ompliant ompliant Material / Finish LP Resin(UL9V-0) / lack opper lloy /ontact rea u over Ni Plating Tail rea Sn-g over Ni Plating opper lloy / Sn-g Plating
2 Plug onnector PD Series PD-PR0699-D1-F P:Plug F:Lead Free R : Right ngle 0699 : Power 6 / Signal : Power 1 / Signal 78 1:with oard Lock 1:ontact rea : u(0.76 μ ) over Ni Plating Tail rea : Sn-g over Ni Plating : ontact rea : u(0.0 μ)over Ni Plating Tail rea : Sn-g over Ni Plating ontact Tail Type D:DIP Type PD-PR0699-D1-F / Power ontact / Mating side Sectional view S. -(5/1).00 Signal ontact PD-PR178-D1-F S. -(5/1) / Power ontact / Mating Side 1 Sectional View STIN - (5/1).00 Signal ontact ountry of origin Lot No. VITNM 51 Series name haracter manufacturers logo
3 (ffective contact length) 1.5) PD Series 1.6) Plug onnector (ffective contact length) Plug:Signal ontact Short (ffective contact length) Receptacle:Signal ontact Middle PD-PR0699-D1-F Plug :Signal ontact Middle Receptacle Signal ontactmiddle Plug:Power ontact Long Receptacle:Power ontact Short PlugFPower ontact Long Receptacle : Power ontact Long row P row Plug: Signal ontact Short ReceptacleSignal ontactmiddle PD-PR178-D1-F Recommended P.. Layout/1) (onnector Mounting Surface Plug :Signal Recommended ontactmiddle P.. thickness t1.6 ReceptacleSignal ontactmiddle Mating side Plug Power ontact Long ReceptaclePower ontact Short Plug :Power ontact Long Receptacle Power ontactlong (Pitch) (Pitch) (Pitch) (Pitch) (Pitch) P max Recommended P.. Layout/1) P edge onnector Mounting Surface) Recommended P.. thickness t Plug: Signal ontact Short ReceptacleSignal ontactmiddle Plug :Signal ontactmiddle ReceptacleSignal ontactmiddle Plug Power ontact Long ReceptaclePower ontact Short Plug :Power ontact Long Receptacle Power ontactlong Table-1 (Seuence length when mating with a connector PD-RS0699-PN-FG.) (Pitch) Row 0.10 a M S S S S (Pitch) (Pitch) (Pitch) (Pitch) S S S Seuence length b S S S S S S S c M S S S S S S ind of contact Power contact Signal contact (M)or(S) max. P Table-1 1 Recommended P.. Layout/1) onnector Mounting Surface) P edge (Seuence L length contacts when first. mating Se.M with contacts a connector second Recommended and PD-RS178-PN-FG.) se.s P.. thickness the last.) t1.6 (The difference of the seuence length of L and M is 1.mm, the difference of the seuence length of L and S is.6mm) Row a Seuence length b c ind of contact Power contact Wthout contact (Seuence L contacts first. Se.M contacts second and se.s the last.) (The difference of the seuence length of L and M is 1.mm, the difference of the seuence length of L and S is.6mm)
4 Plug onnector (5 Power ontacts Type) PD-PR05-D1-F P:Plug F:Lead Free R : Right ngle 05 : 5 contacts 1:with oard Lock : ontact rea : u(0.0 μ)over Ni Plating Tail rea : Sn-g over Ni Plating ontact Tail Type D:DIP Type Lock Pin ross Section ontact ross Section VITNM 01
5 Receptacle onnector PD-RS0699-PN-FG R:Receptacle FG:Lead Free S : Straight 0699 : Power 6 / Signal : Power 1 / Signal 78 N:without oard Lock 1:ontact rea : u(0.76 μ ) over Ni Plating Press-in rea : Sn-g over Ni Plating : ontact rea : u(0.0 μ)over Ni Plating Press-in rea : Sn-g over Ni Plating PD-RS0699-PN-FG /-0.0 ontact Tail Type P:Press-fit 8.10 Power contact(s) side haracter manufacturers logo Power contact(l) Series name side 1 ountry of origin /-0.0 (1.95) (.55) R0. Sectional View (1.7) Sec. - (5/1) Signal contact Sec.-(5/1) 8.10 (.17) (1.7) (.0) PD-RS178PN-FG (0.0) Sec / side haracter manufacturers logo a PD c Series name side 1 ountry of origin THILND DD R0.0 Sectional View /-0.0 (.17) (1.7) (.17) Lot No. 11 5
6 Receptacle onnector (ffective contact length) :onnector outside) Side.90 (10.:onnector outside) onntact row No onnector outside Signal contact side Power contact Plug : Signal ontact Short Receptacle : Signal ontact Middle Recommended P.. Layout(/1) Plug : (onnector Signal ontact Mounting MiddleSurface) Recommended P.. thickness t.5 Receptacle : Signal ontact Middle onnector outside Plug : Power ontact Long Receptacle : Power ontactshort Plug : Power ontact Long Receptacle : Power ontact Long : onnector outside) (Pitch) (Pitch) (Pitch) (Pitch) (Pitch) side (Pitch) Signal contact 0.10 onnector outside side Power contact (10.0 : onnector outside) Recommended P.. Layout(/1) (onnector Mounting Surface) Recommended P.. thickness.5 onnector outside (ffective contact length) Plug:Signal ontact Short Receptacle: Signal ontact Middle Plug:Signal ontact Middle ReceptacleSignal ontact Middle Plug:Power ontact Long Receptacle:Power ontact Short Plug:Power ontact Long Receptacle:Power ontact Long Seuence length ind of contact Row a b c 170.6:onnector outside) enter of mating side Side Wthout contact.90 (10.:onnector outside) onntact row No. (Seuence L contacts first. Se.M contacts second and se.s the last.) Signal contact 0.10 onnector outside side Power contact (The difference of the seuence length of L and M is 1.mm, the difference of the seuence length of L and S is.6mm) Recommended P.. Layout(/1) onnector outside (onnector Mounting Surface) Row Recommended P.. thickness t.5 a M M M M M M M M Seuence length b M M M M M MM c M M M M M M M ind of contact Signal contact (Seuence L contacts first. Se.M contacts second and se.s the last.) (The difference of the seuence length of L and M is 1.mm, the difference of the seuence length of L and S is.6mm) 6
7 Receptacle onnector (5 Power ontacts Type) PD-RS05-D1-F R:Receptacle F:Lead Free S : Straight 05 : 5 contacts 1:with oard Lock : ontact rea : u(0.0 μ)over Ni Plating Tail rea : Sn-g over Ni Plating ontact Tail Type D:DIP Type 7
Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
HEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
Remote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
Micro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm
MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
High Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
EMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
JFA CONNECTOR J300 SERIES
.8mm (.0") pitch rimp.08mm (.") pitch JF ONNETOR J00 SERIES Disconnectable rimp style connectors(wiretoboard/wiretowire) Features Doublespring construction For superior contact reliability, the receptacle
I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
A 10Gb/s Ruggedized COTS High-Density Interconnect System
HERULES Innovative-Interconnect Solutions esign Through Manufacture of High-Performance-Interconnect Systems, onnectors & able ssemblies I f S SWa P i s m i s s i o n c r i t i c a l, M e r i t e c s H
SMA connectors are well known as high performance and compact connector designed for RF broad band application. MIL-STD-348A.
SM onnectors SM connectors are well known as high performance and compact connector designed for R broad band application. Specifications Nominal impedance VSWR Insulation resistance ielectric withstanding
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
CF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
NHD WFB-ETXI#-T-1
NH-5.7-320240WF-ETXI#-T-1 TFT (Thin-Film-Transistor) olor Liquid rystal isplay Module NH- Newhaven isplay 5.7-5.7 iagonal 320240-320xRGx240 Pixels WF- Model E- uilt-in river + 16-it ontroller T- White
ITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
uk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
Technical Data Sheet STRAIGHT MALE RECEPTACLE FOR PCB SNAP TYPE - REEL OF 400
.. pn ao Technical Data Sheet PAGE 1/5 ISSUE 09-11-16E SERIES SMP-MAX PART NUMBER R222M00090 All dimensions are in mm. COMPONENTS MATERIALS PLATING ( m) Body BRASS NPGR Center contact BRASS NPGR Outer
1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
3M MetPak HSHM Press-Fit Header 2 mm Type E, 200 Signal Contacts, 8 Rows, Straight HSHM Series
M MetPak HSHM Press-Fit Header Up to 5 Gb/s data rates Low crosstalk at high frequencies 50/100 Ω (single-ended /differential) impedance Modular/scalable format IEC 61076-4-101 101 mated lines per linear
Thick Film Resistor Networks, Single-In-Line, Molded SIP
Thick Film Resistor Networks, Single-In-Line, Molded SIP STNDRD ELETRIL SPEIFITIONS GLOBL / SHEMTI xxx01 xxx03 xxx05 PROFILE POWER RTING ELEMENT P 70 W 0.20 0.25 0.30 0.40 0.20 0.25 s (1) Tighter tracking
CPCO Series DC-AC Current Probe, Clamp On, 160mm, ±1000A ±2000A ±4000A ±8000A ±12000A, ±16000A
The CPCO Series (160mm aperture) Current Probes are Clamp On current sensors capable of measuring ac and dc currents. The Current Probe splits along a diameter allowing easy installation to existing cables
3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
Hi Density Card Connector SPECIFICATIONS: STANDARD MATERIALS AND FINISHES
Hi Density ard onnector SPEIFITIONS: The micro-miniature card connector series 106 is designed for a space conscious industry. The hi-density card configuration connector provides an extremely dense and
Serial ATA (SATA) Connector
Product 108-51052 Specification PRE: Tay Aik Poh 20 MAY 11 Rev G APP: Leong See Fan DCR No. D20110520030314_706049 Serial ATA (SATA) Connector 1.0 SCOPE This specification covers the requirements for product
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
RH2-ZZ-0003 USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area : 30μ'' Min. Gold LED:Without LED Approved Spec No. Update Date Revision RH217011-00 2017/6/7 A Checked
OBSOLETE. NOT the LATEST REVISION. Quick Reference Guide KOAXXA SMA RF Interconnects. KOAXXA.com
Quick Reference Guide KOXX SM RF Interconnects KOXX.com TE Connectivity introduces its next generation of RF products with KOXX RF interconnects. This product family premiers with the KOXX SM product line
D Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Product Specification - LPS Connector Series
LPS Product Specification - LPS OVERVIEW The LPS products are solderable versions of those in the Neoconix LPM product series. Also developed for mobile devices and other space-constrained applications,
- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
MIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
Rated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
RECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin A Profile and 6, 8 or 10 Pin C Profile
Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin Profile and 6, 8 or 10 Pin Profile STNDRD ELETRIL SPEIFITIONS GLOBL MODEL/ SHEMTI xxx01 xxx03 PROFILE RESISTOR
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
SPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
FOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
A 10Gb/s Ruggedized COTS High-Density Interconnect System
Innovative Interconnect olutions esign Through Manufacture of High-Performance Interconnect ystems, onnectors & able ssemblies 10b/s Ruggedized OT High-ensity Interconnect ystem olving Interconnect Problems
PRODUCT SPECIFICATION
SMT SHIELDED JACKS W.E. TYPE SYSTEM 1.0 SCOPE This specification covers the Molex shielded W.E. type product line which comprises a shield plug (male) and a jack (female) I/O type connector. This system
SA-7000 ROTARY CODED SWITCHES (SMD) S A T A FEATURES PART NUMBER DESIGNATION COPAL ELECTRONICS. RoHS compliant. 1 Marking cover 2 3 4
OPL ELETRONIS ROTRY ODED SWITHES (SMD) S- RoHS compliant INTERNL STRUTURE Part name Material Flammability FETURES RoHS compliant Low profile of. mm Wide variety (top or side setting, or positions, J-hook,
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
BNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**
N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)
SPECIFICATION 宏致電子股份有限公司 桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
Varicon. Contents. The Varicon Range Introduction to Varicon Tools Page 26. Series 7008 Page 6. Series 7022 Page 8. Series 8020 Page 27
AVX Varicon Contents The Varicon Range............................................................ 2 Introduction to Varicon........................................................ 3 Series 7008 Page 6
Low Profile R/A type Board to Cable connector (SGC and Discrete wire)
Low Profile R/ type oard to able connector (S and iscrete wire) Height at mating with vertical receptacle and Right ngle plug is 4.mm PTNT PNIN PL SRIS able assembly by blanket soldering with different
Product Specification - LPM Connector Family
LPM Product Specification - LPM OVERVIEW Developed for mobile devices and other space-constrained applications, the Neoconix LPM line of connectors feature exceptional X-Y-Z density with a simple, highly
I PM. Current Transducer ITZ 5000-SB FLEX ULTRASTAB = 5000 A
urrent Transducer ITZ 5000-SB FLEX ULTRASTAB I PM = 5000 A For ultra-high precision measurement of current: D, A, pulsed..., with galvanic separation between primary and secondary. Separate magnetic head
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/23H 10 July 2017 SUPERSEDING MIL-DTL-55302/23H 3 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, DECADE INCREMENT 10 THRU
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
MODEL: M6SXT. POWER INPUT DC Power R: 24 V DC
Tension-Clamp Ultra-Slim Signal Conditioners M6S Series THERMOCOUPLE TRANSMITTER (PC programmable) Functions & Features Maintenance-free tension clamp connection 5.9-mm wide ultra-slim design Low profile
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
Datasheet MIL-C-5015 series connectors
Datasheet MIL-C-5015 series connectors Page 1 of 16 MIL-C-5015 series connectors Brief Introduction Specification How To Order Contact Arrangements Product Outline Dimensions Cut Dimension Brief Introduction
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
QUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s 2M805 Series Connector
QUALIFICATION TEST SUMMARY REPORT ESR-9414 Qualification Type Testing of Amphenol Corporation s Connector PREPARED BY: Patrick Cole Design Engineer AMPHENOL CORPORATION Aerospace Operation 40-60 Delaware
Maximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
Components for low voltage panel boards
omponents for low voltage panel boards UTUMN UTOMTION N ONTRO EETRI ISTRIUTION OEM Products catalogue Ω OK - Unipolar terminal locks PROUTS Ω OK IT 80-11 IT 80-15 G IT 80-7 W IT-S IN35 TEHNI FETURES 31
Interposer MATED HEIGHT
Product Specification: FEATURES High Performance PCBeam Connector Technology Product options at 1.27mm, 1.0mm, and 0.8mm pitch Maximized pin count per form factor 3 form factor sizes available Standard
TERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
Microwave Coaxial Connectors
!Note Please read rating and!cution (for storage and operating, rating, soldering and mounting, handling) in in this PDF catalog catalog to prevent to prevent smoking smoking and/or and/or burning, burning,