JFA CONNECTOR J300 SERIES
|
|
- Carol Oliver
- 5 years ago
- Views:
Transcription
1 .8mm (.0") pitch rimp.08mm (.") pitch JF ONNETOR J00 SERIES Disconnectable rimp style connectors(wiretoboard/wiretowire) Features Doublespring construction For superior contact reliability, the receptacle contact has a doublespring construction consisting of a main spring and a contact pressure adjustment spring. In addition, a spring stopper is incorporated in the connector to facilitate resistance to excessive pressure. Housing lances Lances are incorporated into the housing design to secure the contacts, therefore keeping contact insertion force low and avoiding contact deformation. Secure locking method When housings are mated, a clear locking sound can be heard to ensure secure engagement. onnectors for signal circuits or power supply circuits, applicable to the factory automation, heavy electric machinery, and other industrial equipment in general. In spite of the various kinds of housings available, their contacts are designed to be common. Thus the applicable tooling can be unified. Recognition mark oth contacts and application tools have identification marks to prevent incorrect combinations. Specifications urrent rating: 0. max., D ( circuits/wg #) Voltage rating: 0 0 series [.8mm(.0")pitch] 0V 0 0 series [.08mm(.")pitch] 00V Temperature range: to +0 (including temperature rise in applying electrical current) ontact resistance: Initial value/m Ω max. fter environmental testing/0m Ω max. Insulation resistance:,000m Ω min. Withstanding voltage: 0 0 series [.8mm(.0")pitch],00V /minute 0 0 series [.08mm(.")pitch],V /minute pplicable wire: WG #8 to # pplicable P board thickness:. to.mm(.0" to.09") * ontact JST if LeadFree product is required. * Temperature Range: The aforementioned temperature range of this connector is described in JST Standard Product Specification. Maximum temperature registered in UL is 0. * Refer to "General Instruction and Notice when using Terminals and onnectors" at the end of this catalog. * ontact JST for details. Standards 0 Recognized E089 ertified LR08 J00 For J0S, J0D, J0M, J0S and J0M series.
2 JF ONNETOR/J00 SERIES List of J00 series products Type.8mm(.0") pitch / Voltage rating 0V Wire to oard Wire to Wire Top entry type Side entry type Free hanging type Panel mounting type J0S Singlerow type ircuits,,,, 8,0,,,, 8,0,, 8,0,, 8,0 J0D Doublerow type [line pitch.08mm(.")] ircuits, 8,0,,, 0, 8,0,,, 0, 8,0,,, 0, 8,0,,, 0 J0M Doublerow module type [line pitch 7.mm(.00")] J0 ircuits J0 J0F Fourrow type [line pitch.08mm(.")] D ircuits, 0 ircuits
3 J0 J J JF ONNETOR/J00 SERIES.08mm(.") pitch / Voltage rating 00V Wire to oard Wire to Wire Top entry type Side entry type Free hanging type Panel mounting type Type J0 J0 J0 J0S Singlerow type,,,,,,,,,,,, ircuits J0 J0 0 J0D Doublerow type [line pitch.08mm(.")] 0, 0, 0 ircuits J0 J0 J0 J0 J0M Doublerow module type [line pitch 7.mm(.00")],0,,0,,, ircuits J0 J0T Triplerow module type [line pitch 7.mm(.00")] 9 ircuits J0 J0T Triplerow common type [line pitch.08mm(.")] 9,8 ircuits
4 JF ONNETOR/J00 SERIES Receptacle contact 7.9(.70)[L:8.(.7)] Strip form Loose piece SFF00(*)P.0 FF00(*)P.0 SFF0(*)P.0 FF0(*)P.0 SFF(*)P.0 LFF(*)P.0 *SFF7(*)P.0 *FF7(*)P.0 pplicable wire Nominal mm WG# S 0.08 to to M 0.0 to 0.0 to 0 L 0.0 to. 0 to L. to.0 to Insulation O.D. mm (in.) 0.8 to. (.0 to.0). to. (.07 to.0).8 to.8 (.07 to.0). to. (.09 to.) Q'ty reel box(loose piece),700,000,700,000 Note),00,000 Note),, (.70)[L:8.(.7)] [.(.09), L:.8(.8)] [9.(.)] [.(.098), L:.0(.8)] opper alloy (superior conductivity), nickelundercoated, selective goldplated Tinplated Note:. Finish (*): GF Nickelundercoated, selective goldplated T Tinplated. ontact JST for containg quantity.. *Marked products are not S/TÜV approved. Tab contact.7(.97)[l:.(.99)] Strip form Loose piece Under developing FM0(*)M.0N LFM(*)M.0N *FM7(*)M.0N Under developing SFM0(*)M.0N SFM(*)M.0N *SFM7(*)M.0N pplicable wire Nominal mm WG# S 0.08 to to M 0.0 to 0.0 to 0 L 0.0 to. 0 to L. to.0 to Insulation O.D. mm (in.) 0.8 to. (.0 to.0). to. (.07 to.0).8 to.8 (.07 to.0). to. (.09 to.) Q'ty reel box(loose piece),00,000,00,000,,000 [.(.09), L:.8(.8)].7(.97)[L:.(.99)] opper alloy (superior conductivity), nickelundercoated, selective goldplated Tinplated [.(.098), L:.0(.8)] [. (.9)] Note:. Finish (*): GF Nickelundercoated, selective goldplated T Tinplated. *Marked products are not S/TÜV approved. Recognition mark Plating of the contact Each contact has a marking on its side so that the type or thickness of the plating is recognized. ex.... goldplated 0.8 micron thickness JST Indication of the plating Receptacle contact JST Indication of the plating Tab contact ommon marking on the contact and its application tools In order to avoid incorrect combination of the hand crimp tools and the contacts, the contact size mark (J) and wire range mark (S, M, L, L) are shown on both the tools and the contacts. J S... WG #8 to # M... WG # to #0 L... WG #0 to # L... WG # to # J L ontact size mark Wire range mark Receptacle contact J L ontact size mark Tab contact Wire range mark pplicator for the semiautomatic press PKN ontact rimp applicator MKSL ompact crimp applicator MKSLS Stripcrimp applicator MKSS with safety cover without safety cover with safety cover without safety cover with safety cover SFF00GFP.0 PLMK SFF/M000 PLN SFF/M000 SFF0GFP.0 PLMK SFF/M00 PLN SFF/M00 SFM0GFM.0N PLMK SFF/M00 PLN SFF/M00 SFFGFP.0 PLMK SFF/M0 PLN SFF/M0 SFMGFM.0N PLMK SFF/M0 PLN SFF/M0 SFF7GFP.0 PLMK SFF/M70 PLN SFF/M70 SFM7GFM.0N PLMK SFF/M70 PLN SFF/M70
5 JF ONNETOR/J0S Receptacle housing.8(.0) J ircuit No. JST.(.8).(.).8(.898) 7. (.8) ircuits Keying 8 0 FFSS0VK 7.(.00).70(.7).(.08) FFSS0VK 7.(.00).70(.7).(.08) FFSS0VK.(.0) 0.(.807) 0.(.98) FFSS0VK.(.0) 0.(.807) 0.(.98) FFSS0VK.(.00).(.97).(.8) FFSS0VK.(.00).(.97).(.8) FFSS0VK 9.0(.70) 8.(.07) 8.0(.98) FFSS0VK 9.0(.70) 8.(.07) 8.0(.98) FFSS08VK.7(.00).7(.07).7(.798) FFSS08VK.7(.00).7(.07).7(.798) FFSS0VK.9(.0).7(.707).9(.098) FFSS0VK.9(.0).7(.707).9(.098) Glassfilled PT, UL9V0, black Tab housing (Free hanging type).0(.97).(.).0(.7).8(.0) J0.7(.00) ircuit No. 9.(.8) 8.78 (.) 9. (.8) ircuits Keying 8 0 FMSF0VK FMSF0VK FMSF0VK FMSF0VK FMSF08VK FMSF08VK FMSF0VK FMSF0VK 7.(.00).(.8).7(.007) 7.(.00).(.8).7(.007).(.00) 9.(.).9(.07).(.00) 9.(.).9(.07).7(.00) 0.7(.0).(.77).7(.00) 0.7(.0).(.77).9(.0) 8.9(.90).(.07).9(.0) 8.9(.90).(.07) Glassfilled PT, UL9V0, black Tab housing (Panel mounting type).(.8) dia..(.).0(.7).0(.97) E D.8(.0) J0 ircuit No..7(.00) 9.(.8) 0.(.0).(.0) onnector outline Panel layout 8.78 (.) 9. (.8).±0.(.±.00)dia. D±0.0(.00) 0.(.00)R max. ircuits Keying 8 0 D E FMSP0VK 7.(.00).(.8).0(.890).00(.0) 0.00(.7) FMSP0VK 7.(.00).(.8).0(.890).00(.0) 0.00(.7) FMSP0VK.(.00) 9.(.) 0.0(.89) 8.00(.9) 7.00(.80) FMSP0VK.(.00) 9.(.) 0.0(.89) 8.00(.9) 7.00(.80) FMSP08VK.7(.00) 0.7(.0).0(.8) 0.00(.99) 9.00(.) FMSP08VK.7(.00) 0.7(.0).0(.8) 0.00(.99) 9.00(.) FMSP0VK.9(.0) 8.9(.90) 9.0(.97) 8.00(.8) 7.00(.8) FMSP0VK.9(.0) 8.9(.90) 9.0(.97) 8.00(.8) 7.00(.8) Glassfilled PT, UL9V0, black 7
6 JF ONNETOR/J0S Header (Top entry type) ircuit No..8(.0) [.7(.)] J0 9. (.8).(.80).8(.0) [.7(.00)] ircuits Keying 8 0 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 08FSKGGR 08FSKGGR 0FSKGGR 0FSKGGR 7.(.00).97(.0).(.8) 7.(.00).97(.0).(.8).(.0) 7.78(.700).(.00).(.0) 7.78(.700).(.00).(.00).9(.80) 9.(.).(.00).9(.80) 9.(.) 9.0(.70).0(.000).0(.0) 9.0(.70).0(.000).0(.0).7(.00).0(.00) 0.7(.0).7(.00).0(.00) 0.7(.0).9(.0) 0.(.00) 8.9(.90).9(.0) 0.(.00) 8.9(.90) box ±0. (.0±.00)dia. opper foil land:.0(.8)dia. min..7±0.0 (.00±.00) Tab contact: opperalloy, nickelundercoated, selective goldplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated.0±0. (.079±.00)dia..7±0.0(.±.00).8±0.0 (.0±.00) ±0.0(.00) onnector outline Note: ontact JST for the headers supplied in magazine stick. P board layout Header (Side entry type).(.) ircuit No..8(.0) J0 [.8(.0)] 9. (.8).(.870).8 (.0) 0.8 (.7) (.00) (.0) ircuits Keying 8 0 S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S08FSKGGR S08FSKGGR S0FSKGGR S0FSKGGR 7.(.00).(.00).(.8) 7.(.00).(.00).(.8).(.0) 9.0(.70).(.00).(.0) 9.0(.70).(.00).(.00).8(.900) 9.(.).(.00).8(.900) 9.(.) 9.0(.70).7(.00).0(.0) 9.0(.70).7(.00).0(.0).7(.00).9(.0) 0.7(.0).7(.00).9(.0) 0.7(.0).9(.0).9(.0) 8.9(.90).9(.0).9(.0) 8.9(.90) box ±0.0 (.00±.00) 0.8 (.0).8±0.0.8±0.0 (.0±.00) (.0±.00) ±0.0(.00) onnector outline opper foil land:.0(.7)dia. min..0±0.(.8±.00)dia..±0.(.0±.00)dia. Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick. P board layout 8
7 JF ONNETOR/J0D Receptacle housing.08(.).8(.0).(.8).(.8) ircuits Keying FFDS0VK FFDS08VK FFDS0VK FFDSVK FFDSVK FFDS0VK 7.(.00).70(.7).(.08).(.0) 0.(.807) 0.(.98).(.00).(.97).(.8) 9.0(.70) 8.(.07) 8.0(.98).7(.00).7(.07).7(.798).9(.0).7(.707).9(.098) J JST.(.).8(.898) Glassfilled PT, UL9V0, black ircuit No. Tab housing (Free hanging type).0(.97).8 (.0).08(.) 7.78(.700).(.8) ircuits Keying FMDF0VK 7.(.00).(.8).7(.007) FMDF08VK.(.0).(.00) 9.8(.7) FMDF0VK.(.00) 9.(.).9(.07) FMDFVK 9.0(.70).0(.0) 7.00(.7) FMDFVK.7(.00) 0.7(.0).(.77) FMDF0VK.9(.0) 8.9(.90).(.07).(.).0(.7) J0 ircuit No. Glassfilled PT, UL9V0, black Tab housing (Panel mounting type) dia..(.8).0(.97).8(.0) E D.08(.) 7.78(.700).(.8) ircuits Keying FMDP0VK FMDP08VK FMDP0VK FMDPVK FMDPVK FMDP0VK D E 7.(.00).(.8).0(.890).00(.0) 0.00(.7).(.0).(.00).0(.09).0(.8).0(.7).(.00) 9.(.) 0.0(.89) 8.00(.9) 7.00(.80) 9.0(.70).0(.0).00(.9).00(.).00(.008).7(.00) 0.7(.0).0(.8) 0.00(.99) 9.00(.).9(.0) 8.9(.90) 9.0(.97) 8.00(.8) 7.00(.8).(.).0(.7) J0 ircuit No. Glassfilled PT, UL9V0, black D±0.0(.00).(.0) 7. (.0) onnector outline Panel layout.±0. (.±.00)dia. 0. (.00)R max. 9
8 JF ONNETOR/J0D Header (Top entry type).8(.0).08(.).(.8) [.7(.00)].08(.) ircuits Keying FDKGGR 08FDKGGR 0FDKGGR FDKGGR FDKGGR 0FDKGGR 7.(.00).97(.0).(.8).(.0) 7.78(.700).(.00).(.00).9(.80) 9.(.) 9.0(.70).0(.000).0(.0).7(.00).0(.00) 0.7(.0).9(.0) 0.(.00) 8.9(.90) box ircuit No. J0.(.80) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated.±0. (.0 ±.00)dia..8(.0) [.7(.)].8(.0) Note: ontact JST for the headers supplied in magazine stick. opper foil land:.0(.8)dia. min..7±0.0 (.00±.00).08±0.0 (.±.00).0±0. (.079±.00)dia..7±0.0 (.±.00).8±0.0 (.0±.00) ±0.0(.00) onnector outline P board layout Header (Side entry type).(.).8 (.0) [.8(.0)].08 (.).(.8).9(.7).8 (.0) (.00)(.0)(.0) ircuits Keying S0FDKGGR S08FDKGGR S0FDKGGR SFDKGGR SFDKGGR S0FDKGGR 7.(.00).(.00).(.8).(.0) 9.0(.70).(.00).(.00).8(.900) 9.(.) 9.0(.70).7(.00).0(.0).7(.00).9(.0) 0.7(.0).9(.0).9(.0) 8.9(.90) box ircuit No. J0.9(.00) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick. onnector outline 7.±0.0 (.00±.00) opper foil land:.0(.7)dia. min..0±0.(.8 ±.00)dia..8±0.0 (.0±.00) 0.8(.0).8±0.0 (.0±.00).8±0.0 (.0±.00) ±0.0(.00) P board layout.±0.(.0 ±.00)dia. 70
9 JF ONNETOR/J0M Receptacle housing 7.(.00).8(.0) ircuits Keying 7. (.00).7(.8).77(.8) FFMS0VK FFMS0VK FFMS0VK [.7(.7)].(.).8(.898) Glassfilled PT, UL9V0, black J JST ircuit No. [.(.8)] [.(.08)] Header (Top entry type) ircuit No..(.8).8(.0) 7. (.00) J0 7. (.00).97(.8).(.80).±0. (.0±.00)dia. opper foil land:.0(.8)dia. min. [.7(.00)] 7. (.00).7±0.0(.00±.00) 7.±0.0(.00±.00) ircuits Keying 0FMKGGR 0FMKGGR 0FMKGGR box Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick..8(.0) [.7(.)].8(.0).0±0. (.079±.00)dia..8±0.0(.0±.00).7±0.0(.±.00).97±0.0 (.0±.00) P board layout onnector outline Header (Side entry type).8(.0). (.) ircuit No. J0.(.8) [.8(.0)] 7. (.00).9(.00).8(.0).97(.8) 8.7(.77) 7.±0.0 (.00±.00) (.00)(.0)(.0) onnector outline opper foil land:.0(.7)dia. min..0±0. (.8±.00)dia. ircuits Keying S0FMKGGR S0FMKGGR S0FMKGGR Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick. box ±0.0 (.0±.00).8±0.0 (.0±.00).8±0.0 (.0±.00) P board layout.±0.(.0±.00)dia..±0.0(.00±.00) 7
10 JF ONNETOR/J0M Keying J0M series have misinsertion preventive keying. vailable in types type, type and type. (Headers viewed from the mating side are shown below.) Key rib Key rib Key rib Line Line Indication of keying Line Line Line Indication of keying Line Indication of keying Type Type Type List of combinations With the combination of the J0M headers and the J0M/J0S receptacle housings, the following modular combination are possible. Header Receptacle housing Top entry type Side entry type Singlerow circuits (J0S) Type FFSS0VK Singlerow circuits (J0S) Type 0FSKGG Singlerow circuits (J0S) Type S0FSKGG Type Type Type FFSS0VK 0FSKGG S0FSKGG Doublerow circuits (J0M) Type FFMS0VK Doublerow circuits (J0M) Type 0FMKGG Doublerow circuits (J0M) Type S0FMKGG Type Type Type FFMS0VK J0 0FMKGG S0FMKGG Type Type Type FFMS0VK 0FMKGG S0FMKGG 7
11 JF ONNETOR/J0S Receptacle housing.08(.) J ircuit No. JST.(.).8(.898).(.8) 7. (.8) ircuits Keying FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK FFSS0VK.08(.).(.7).08(.98).08(.).(.7).08(.98) 0.(.00) 9.(.77) 9.(.8) 0.(.00) 9.(.77) 9.(.8).(.00).(.97).(.8).(.00).(.97).(.8) 0.(.800) 9.0(.7) 9.(.8) 0.(.800) 9.0(.7) 9.(.8).0(.000).8(.7).0(.78).0(.000).8(.7).0(.78) Glassfilled PT, UL9V0, black Tab housing (Free hanging type).0(.97).08(.).7(.00) 9.(.8) 8.78 (.) 9. (.8) ircuits Keying FMSF0VK FMSF0VK FMSF0VK FMSF0VK FMSF0VK FMSF0VK.08(.) 9.08(.7).0(.907).08(.) 9.08(.7).0(.907) 0.(.00).(.9) 8.(.07) 0.(.00).(.9) 8.(.07).(.00) 9.(.).9(.07).(.00) 9.(.).9(.07).(.).0(.7) J0 ircuit No. Glassfilled PT, UL9V0, black Tab housing (Panel mounting type).(.8) dia..0(.97).08(.) E D.7(.00) 9.(.8) 8.78 (.) ircuits Keying FMSP0VK FMSP0VK FMSP0VK FMSP0VK FMSP0VK FMSP0VK D E.08(.) 9.08(.7) 0.00(.787) 8.00(.0).8(.0).08(.) 9.08(.7) 0.00(.787) 8.00(.0).8(.0) 0.(.00).(.9).00(.98).00(.99).9(.0) 0.(.00).(.9).00(.98).00(.99).9(.0).(.00) 9.(.) 0.00(.8) 8.00(.9).99(.80).(.00) 9.(.) 0.00(.8) 8.00(.9).99(.80).(.).0(.7) J0 ircuit No. 0. (.0). (.0) D±0.0(.00) Glassfilled PT, UL9V0, black onnector outline Panel layout.±0. (.±.00)dia. 0.(.00)R max. 7
12 JF ONNETOR/J0S Header (Top entry type) ircuits Keying box ircuit No..08(.) J0 9. (.8).(.80) [.7(.00)] 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR 0FSKGGR.08(.).08(.) 0.(.00) 0.(.00).(.00).(.00) 0.(.800) 0.(.800).0(.000).0(.000).(.0).(.0).(.0).(.0).9(.80).9(.80).7(.00).7(.00).7(.0).7(.0) 9.08(.7) 9.08(.7).(.9).(.9) 9.(.) 9.(.).(.).(.) 9.0(.) 9.0(.) (.).±0.(.0±.00) dia. opper foil land:.0(.8)dia. min..8 (.0) [.7(.)].7±0.0(.00±.00) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick..0±0. (.079±.00)dia..7±0.0(.±.00).08±0.0 (.±.00) ±0.0(.00) onnector outline P board layout Header (Side entry type) ircuits Keying box.(.).08(.) [.8(.0)].8 (.0) (.00) (.0) S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR.08(.).08(.) 0.(.00) 0.(.00).70(.00).70(.00) 7.78(.700) 7.78(.700) 9.08(.7) 9.08(.7).(.9).(.9) ircuit No. J0 9. (.8).(.870) 0.8(.7) S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR S0FSKGGR.(.00).(.00) 0.(.800) 0.(.800).0(.000).0(.000).8(.900).8(.900) 7.9(.) 7.9(.).0(.00).0(.00) 9.(.) 9.(.).(.).(.) 9.0(.) 9.0(.) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated onnector outline 7.±0.0 (.00±.00) opper foil land:.0(.7)dia. min. Note: ontact JST for the headers supplied in magazine stick..0±0.(.8±.00)dia. 0.8 (.0).8±0.0(.0±.00).08±0.0 (.±.00) ±0.0(.00).±0.(.0±.00)dia. P board layout 7
13 JF ONNETOR/J0M Receptacle housing.08(.) 7. (.00).7(.8).77(.8) ircuits Keying FFMS0VK FFMS0VK FFMS0VK FFMS0VK 0.(.00) 9.(.77) 9.(.8) 0.(.00) 9.(.77) 9.(.8) 0.(.00) 9.(.77) 9.(.8) 0.(.800) 9.0(.7) 9.(.8) 0 FFMS0VK 0.(.800) 9.0(.7) 9.(.8) FFMS0VK 0.(.800) 9.0(.7) 9.(.8) J JST.(.).8(.898) FFMSVK FFMSVK FFMSVK.0(.000).0(.000).0(.000).8(.7).8(.7).8(.7).0(.78).0(.78).0(.78) ircuit No. Glassfilled PT, UL9V0, black Tab housing (Free hanging type) ircuits Keying 7. (.00) 0.(.800).97(.8).(.) FMDF0VK FMDF0VK FMDF0VK 0.(.00) 0.(.00) 0.(.00).(.9).(.9).(.9) 8.(.07) 8.(.07) 8.(.07).08(.).0(.97) FMDFVK FMDFVK FMDFVK.0(.000).0(.000).0(.000) 9.0(.) 9.0(.) 9.0(.).(.707).(.707).(.707).(.).0(.7) J0 ircuit No. Glassfilled PT, UL9V0, black Tab housing (Panel mounting type) dia..(.8) E D 7.(.00) 0.(.800).97(.8).0(.97).0(.7) J0 ircuit No. D±0.0(.00) 7.9(.70) 8.9 (.).(.) ircuits Keying FMDP0VK FMDP0VK FMDP0VK FMDPVK D E 0.(.00).(.9).00(.98).00(.99).9(.0) 0.(.00).(.9).00(.98).00(.99).9(.0) 0.(.00).(.9).00(.98).00(.99).9(.0).0(.000) 9.0(.).00(.) 9.00(.99) 7.9(.80).08(.) FMDPVK FMDPVK.0(.000) 9.0(.).00(.) 9.00(.99) 7.9(.80).0(.000) 9.0(.).00(.) 9.00(.99) 7.9(.80).(.) Glassfilled PT, UL9V0, black.±0.(.±.00)dia. onnector outline 0.(.00)R max. Panel layout 7
14 JF ONNETOR/J0M Header (Top entry type) ircuits Keying box 7. (.00).97(.8) [.7(.00)] 7. (.00) 0 0FMKGGR 0FMKGGR 0FMKGGR 0FMKGGR 0FMKGGR 0.(.00) 0.(.00) 0.(.00) 0.(.800) 0.(.800).(.0).(.0).(.0).7(.00).7(.00).(.9).(.9).(.9).(.).(.) FMKGGR FMKGGR 0.(.800).0(.000).7(.00).7(.0).(.) 9.0(.) 8 7 ircuit No. J0.(.80) FMKGGR FMKGGR.0(.000).0(.000).7(.0).7(.0) 9.0(.) 9.0(.) (.).±0. (.0±.00)dia. opper foil land:.0(.8)dia. min..8 (.0) [.7(.)].7±0.0 (.00±.00) 7.±0.0 (.00±.00) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: ontact JST for the headers supplied in magazine stick..0±0. (.079±.00)dia..7±0.0(.±.00).08±0.0 (.±.00) onnector outline ±0.0(.00) P board layout Header (Side entry type) ircuits Keying box S0FMKGGR 0.(.00) 7.78(.700).(.9) 80.08(.) [.8(.0)].8 (.0) 7. (.00).08 (.) 0.8 (.0) S0FMKGGR S0FMKGGR 0.(.00) 0.(.00) 7.78(.700) 7.78(.700).(.9).(.9) (.) 7. (.00).97(. 8) 8.7(.77) 0 S0FMKGGR S0FMKGGR S0FMKGGR 0.(.800) 0.(.800) 0.(.800) 7.9(.) 7.9(.) 7.9(.).(.).(.).(.) SFMKGGR.0(.000).0(.00) 9.0(.) 8 SFMKGGR.0(.000).0(.00) 9.0(.) 8 SFMKGGR.0(.000).0(.00) 9.0(.) 8 ircuit No. J0 7.8(.070) Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated 7.±0.0 (.00±.00) onnector outline opper foil land:.0(.7)dia. min. Note: ontact JST for the headers supplied in magazine stick..0±0.(.8±.00)dia..08±0.0 (.±.00 ).8±0.0 (.0±.00).08±0.0 (.±.00) ±0.0(±.00) P board layout.±0.(.0 ±.00)dia. 7
15 JF ONNETOR/J0M Keying J0M series have misinsertion preventive keying. vailable in types type, type and type. (Headers viewed from the mating side are shown below.) Key rib Key rib Key rib Line Line Indication of keying Line Line Indication of keying Line Line Indication of keying Type Type Type List of combinations With the combination of the J0M headers and the J0M/J0S receptacle housings, the following modular combinations are possible. Receptacle housing Tab housing Header Singlerow,, circuits (J0S) type FFSS VK Singlerow circuits (J0S) J0 type Free hanging type FMSF VK Panel mounting type FMSP VK Singlerow,, circuits (J0S) J0 type Top entry type FSKGG Side entry type S FSKGG type FFSS VK Free hanging type type Free hanging type FMSF VK Panel mounting type Panel mounting type FMSP VK J0 Top entry type J0 Side entry type type Top entry type FSKGG Side entry type S FSKGG Doublerow,0,circuits (J0M) type FFMS VK Doublerow,circuits (J0M) J0 type Free hanging type FMDF VK Panel mounting type FMDP VK Doublerow,0,circuits (J0M) type Top entry type FMKGG Side entry type S FMKGG type FFMS VK Free hanging type J0 type Free hanging type FMDF VK Panel mounting type FMDP VK J0 Top entry type J0 type Top entry type FMKGG Side entry type S FMKGG type FFMS VK type Free hanging type Panel mounting type FMDF VK Panel mounting type FMDP VK Side entry type type Top entry type FMKGG Side entry type S FMKGG 77
16 JF ONNETOR/J0T Receptacle housing 0.(.00).08(.) 9.(.77).(.8) 7. (.8) ircuits Keying FFSS0VK FFSS0VK Glassfilled PT, UL9V0, black ircuit No. J JST 9.(.8).(.).8(.898) 0.(.00).08(.) 7. (.00).7(.8).77 (.8) ircuits Keying FFMS0VK FFMS0VK FFMS0VK 9.(.77) ircuit No. J JST 9.(.8).(.).8(.898) Glassfilled PT, UL9V0, black Header (Side entry type).(.).08(.) [.8(.0)] 7. (.00) 7. (.00).9(.98).8 (.0).09(.07) 7. (.00).08 (.) 0.8 (.0) ircuits Keying 9 S09FTKGGR S09FTKGGR S09FTKGGR S09FTKGGDR box Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated onnector outline Note: Not S/TÜV approved. ircuit No. J0.(.70) 7.±0.0 (.00±.00) opper foil land:.0(.7)dia. min..0±0.(.8±.00)dia..±0.(.0±.00)dia..(.9).08±0.0 (.±.00) 7.78±0.0 (.700±.00).08±0.0(.±.00).8±0.0(.0±.00) P board layout 78
17 JF ONNETOR/J0T Keying J0T series have misinsertion preventive keying. vailable in types type, type, type and type. (Headers viewed from the mating side are shown below.) Line Line Line Line Line Line Indication of keying Line Line Indication of keying Line Line Indication of keying Line Line Indication of keying Key rib Key rib Key rib Key rib Type Type Type Type List of combinations With the combination of the J0T headers and the J0S/J0M receptacle housings, the following modular combinations are possible. Receptacle housing Side entry type Header Singlerow circuits (J0S) type FFSS0VK Triplerow 9circuits (J0T) type S09FTKGGR type FFSS0VK type S09FTKGGR Doublerow circuits (J0M) type FFMS0VK J0 type S09FTK GGR type FFMS0VK type type S09FTKGGDR FFMS0VK 79
18 JF ONNETOR/J0F Receptacle housing ( circuits) 7.(.00).8(.0).08(.).(.00).8(.898).(.) D 0.(.8).7(.88) ircuits Keying 0 FFFVK FFF0VK Glassfilled PT, UL9V0, black. (.8) Note: Not S/TÜV approved. (0 circuits).(.00).8(.0).08(.).8(.898).(.).(.00) D 0.(.8).7(.88) 9.8(.78) Header (Side entry type).8(.0).8(.0) 7.(.00) 0.8(.0).8(.0) ircuits Keying SFFKGGR 0 S0FFKGGR 7.(.00).0(.9).(.00).(.89) box.(.).08(.) 0.09(.8).9(.) D Tab contact: opperalloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opperalloy, copperundercoated, tin/leadplated Note: Not S/TÜV approved. onnector outline ircuit No. J0.(.0) 7.±0.0 (.00±.00) opper foil land:.0(.7)dia. min..0±0.(.8±.00)dia..±0.(.0±.00)dia..8±0.0 (.0±.00).8±0.0(.0±.00) P board layout ] 80
19 JF ONNETOR/J0D Receptacle housing ( circuits).08(.).8(.898).(.) 7.8(.8) 9.98(.787) ( circuits) ( circuits) (0 circuits).08(.).08(.).8(.898).(.) 7.8(.8) 9.98(.787).08(.) 0.(.00).08(.).8(.898).(.) 7.8(.8) 9.98(.787) 0.(.800).08(.).08(.).8(.898).(.) 7.8(.8) 9.98(.787).8(.80) 9.(.80).7(.80).9(.980) (0 circuits).7(.800).08(.) 0.(.980).08(.).8(.898).(.) 7.8(.8) 9.98(.787) ircuits Keying 0 0 FFD0VK FFD0VK FFD0VK FFD0VK FFD0VK Glassfilled PT, UL9V0, black Note: Not S/TÜV approved. Header (Top entry type) Header (Side entry type) (.) J0.08(.).(.80) ircuit No. 8.7(.7) opper foil land:.0(.8)dia. min..0±0. (.079±.00)dia. onnector outline.08(.).8(.0) N.±0. (.0±.00)dia..08±0.0(.±.00) ±0.0(.00).8±0.0 (.0±.00).08±0.0 (.±.00) P board layout.(.) (.) J0.08(.).08 (.) 7.8(.070) ircuit No..8(.0) 8.7(.7) 9.7(.77) 7.±0.0 (.00±.00).08±0.0 (.±.00) (.00)(.) (.0) P board layout onnector outline opper foil land:.0(.7)dia. min..0±0.(.8±.00)dia..±0.(.0±.00)dia..08±0.0(.±.00) ircuits Keying 0 FDKGGR 0FDKGGR. (.000).8(.79).7(.800).8 (.079) box ircuits Keying 0 SFDKGGR S0FDKGGR. (.000).8(.79).7(.800).8 (.079) box Tab contact: opper alloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opper alloy, copperundercoated, tin/leadplated Tab contact: opper alloy, nickelundercoated, selective goldplated, selective tin/leadplated Housing: Glassfilled PT, UL9V0, black Reinforcing metal fixture: opper alloy, copperundercoated, tin/leadplated Note: Not S/TÜV approved. Note: Not S/TÜV approved. 8
20 JF ONNETOR/J0T Receptacle housing.8(.898).(.) ircuits Keying FFT0VK. (.).(.99) [8.0(.0)] Note: Not UL/S/TÜV approved. Glassfilled PT, UL9V0, black.9(.9) Tab housing 0.0 (.8) ircuits Keying 9 8 P09FTKGGR P8FTKGGR box.0(.78).(.08) 7.8(.70) 0.(.97).(.).(.0). (.8)dia.. (.).09(.07) 9.(.9) Tab contact: opper alloy, nickelundercoated, selective goldplated Housing: Glassfilled PT, UL9V0, black Note: Not UL/S/TÜV approved..08(.) ircuit No. ±0.0 (.00).0 (.97).0 (.7) ircuit No. J0 7.±0.(.07±.0).±0. (.±.0).±0. (.±.00)dia. onnector outline 0.(.00)R max. Panel layout 8
21 JF ONNETOR/J90 Plug Housing ssembly 9.8(.9) 9.0(.8) 0.0(.).0(.7).0(.7).0(.)dia. [.(.8)].7 (.89) 7.(.8).0 (.9) 7. (.9) J90(I / O Metal onnector) PJFJ90 Plug housing: PT, UL9V0, black enter screw assembly: SUS over : Zinc alloy, nickelplated Note:. Refer page about Receptacle contact.. Not UL/S/TÜV approved. 8
22 JF ONNETOR/J90 over Kit ap Housing ssembly.9(.7) 0.(.79).(.7) 0.0(.).0(.7).0 (.7) pitch.(.8) 9.(.870).(.7).(.) dia. 8.0(.).0(.) 7. (.9).0(.0).7 (.7) 0.0(.7). (.909) 9.±0.(.870±.00).0±0.(.97±.00) 0.0±0.(.±.00).0(.7).0±0.0(.7±.00).(.7) onnector outline.±0.(.±.00)dia. 9.8(.9) 0.9±0.(.0±.00)dia. P board layout 8.0±0. (.±.00) JFJ90K RJFJ90 over : Zinc alloy, nickelplated over : Zinc alloy, nickelplated able cramp: SP rossrecessed flat head screws(mx): SUS, Market Product(prepared by customer) rossrecessed pan head screws(mx0): SUS, Market Product(prepared by customer) Note: Not UL/S/TÜV approved. Note: Not UL/S/TÜV approved. Tab contact: opperalloy Housing base: PT, UL9V0, black ap housing: Zinc alloy, nickelplated Inserted nut: SUS pplicator for the semiautomatic press PKN ontact rimp applicator MKSL ompact crimp applicator MKSLS Stripcrimp applicator MKSS with safety cover without safety cover with safety cover without safety cover with safety cover SFF00GFP.0 PLMK SFF000 PLN SFF000 SFF0GFP.0 PLMK SFF/M00 PLN SFF/M00 SFM0GFM.0N PLMK SFF/M00 PLN SFF/M00 SFFGFP.0 PLMK SFF/M0 PLN SFF/M0 SFMGFM.0N PLMK SFF/M0 PLN SFF/M0 SFF7GFP.0 PLMK SFF/M70 PLN SFF/M70 SFM7GFM.0N PLMK SFF/M70 PLN SFF/M70 8
23 JF ONNETOR/J00 SERIES Protector J0D series/ for 0 circuits FPFD0(*).08(.) 0.(.980).(.0) [.9(.89)] [.(.8)] FFDS0VK [.7(.707)].9(.098) J0D series/ Embeddingtype protector for 8, 0 circuits FPFS0KU* This protector is cut and used for each number of circuits. [.9(.098)] [.(.8)] When applying current to connector, this protector prevents insertion of foreign matter to contacting part from wire side. ut it does not have function of wire retention. [.7(.707)] J0F series/for 0 circuits [.(.8)] FPFF0(*)* FPFF0(*)* 0.8(.0) [.8(.898)].0(.907).(.7).(.8) [7.9(.9)] FFF0VK [9.8(.78)].77(.0) (*)Stands for material. ontact JST for details. J0 Note: The products listed above are not UL/S/TÜV approved. 0 J
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
More informationJFA CONNECTOR J1000 SERIES
JFA CONNECTOR J1000 SERIES 2.2mm pitcth/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating: Circuits 22 2 0 #1.4 5.5 5.5 4.7 4.0.9.. # 5.4 4. 4..9.4..0.0 Wire
More informationJFA CONNECTOR J1000 SERIES
JF CONNECTOR J000 SERIES mm pitcth/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating: Refer to the following matrix table. Voltage rating: 5V C, DC Temperature
More information.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationRWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationYL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch Disconnectable Crimp style Wiretowire connectors Features The retainer features added protection against noninsertion or disconnection. Housing lance The resilient plastic housing lances
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
More informationD-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
More informationWIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
More informationHEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
More informationGecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationSeries 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
More informationPower Board to Board Connector
Power oard to oard onnector PD Series OUTLINE PD series is a board to board connector for high current power supply units which combines power and signal contacts. FETURE ontact is highly reliable connection
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with to 96 contacts are available for various
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More information0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
More informationExtraction Tool for Buss Contact
Tooling Akey feature of the Cannon DL connector series is easy contact termination, both in the field and in high-volume production. An ergonomically designed hand crimp tool is available for the low volume
More informationXA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
More informationlif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationBNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**
N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationSurface Mount Connectors
Surface Mount Connectors 3 As the industry s first surfacemountable connectors to be supplied on a continuous reel, our surface mount connectors are designed to be used as part of Zierick s Surf-Shooter
More informationTNC Connectors. General Description. TNC Configurations. TNC Specifications* Plug Interface** Jack Interface**
TN onnectors General Description Delta TN connectors are compact, 50 Ω impedance connectors with 7 16-28 threaded coupling, similar in size to N connectors but with better electrical characteristics. They
More information10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
More informationFor FPC. FPC connectors (0.3mm pitch) Back lock
0.9 For FPC FPC connectors (0.3mm pitch) Back lock AYF33 Y3B/Y3BW Series New Y3B Y3BW is added. FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) Back lock type and the slim body with a 3.15 mm depth
More informationApplication Specification
1 of 10 A 1.0 OBJECTIVE This specification provides information and requirements regarding customer application of Minitek Pwr4.2 crimp to wire connectors. This specification is intended to provide general
More informationboth pin and sleeve contacts.
The different modules are inserted into the appropriate retaining frames (which vary according to the different housing sizes). There they snap in easily and safely. A special removal tool ensures quick
More informationCommercial Micro-D Subminiature I/O Products
Subminiature I/O Products requiring the density of a microminiature connector Designed In: Inches Packaging: Tube Mates With: 83421, 83422, 83424 PCB Thickness: 1.60mm (.062 ) Lead Free Process Capability:
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationTSB Suffix Suffix. 503Si 2 Suffix
Catalog Numbering Code Europa locks TS 230 02 Suffix Suffix Series Europa locks Options (blank) = Standard (105 ) HT = High Temperature (150 ) US = 600V Pitch 230 = 8mm 500 = 10mm 500SK = 10mm, Elongated
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More informationCatalog Navigation Guide
atalog Navigation Guide We have configured this online version of our catalog to take advantage of crobat navigation shortcuts (links). However, these links are not visible on the pages making them visible
More informationFor FPC. FPC connectors (0.3mm pitch) Back lock
Automation Controls Catalog For FPC FPC connectors (0.3mm pitch) Back lock Y3BL Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The Y3BL is a 0.6 mm low-profile connector with a back-lock
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More informationMIL-DTL Series III Type Connectors
-90 Memory Stick How To Order Sample Part Number -90 NF -5 N H P Series / Basic Part No. -90 NF = Aluminum/admium Olive Drab ME = Aluminum/Electroless Nickel MT = Aluminum/Nickel PTFE ZR = Aluminum/Zinc-Nickel
More informationCAPSULE CONTACT MECHANISM AND HIGH-CAPACITY CUTOFF COMPACT RELAY FEATURES
CAPSULE CONTACT MECHANISM AND HIGH-CAPACITY CUTOFF COMPACT RELAY EV RELAYS (AEV) 80A A 0A FEATURES. High-, high-current control possible 0 high- switching cutoff has been achieved thanks to a sealed construction
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 114-16016 17 APR 14 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Unless
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationFOR BOARD-TO-CABLE CONNECTION
OR OR-TO-L ONNTION 240R SRIS TURS 1.27 mm (0.0 in.) pitch contact arrangement enables high-density mounting. ellows ensure stable contact preventing pins from bending. The bellows also have excellent stability
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More information- UMP series : board to wire application
MMP INTRODUCTION RADIALL, the pioneer in SMT coaxial connectors with the MMS series, has become a world wide leader in this technology. Thanks to this SMT expertise, RADIALL now announces another breakthrough
More informationContacts, Tools, and Accessories
ontacts, Tools, and ccessories able reduction sleeve REDUTION SLEEVEs FOR BLE Reduction Sleeve Length for use with Mechanical able lamp or Basketweave able Grip Shell Sleeve P/N Sleeve inner diameter [mm]
More informationThe Spec-Kon. Example: KV18-6R-M (18) AWG (14) AWG (10) AWG (8) 8 AWG (6) 6 AWG (4) 4 AWG (2) 2 AWG
Overview Crimp, Disconnects, and Splices Thomas & Betts is pleased to introduce crimp terminals, disconnects, and splices. Ideal for OE applications, the line can be used anywhere a high number of terminations
More informationFPC connectors (0.3mm pitch) Front lock with FPC tabs
AYF31 For FPC FPC connectors (0.3mm pitch) Front lock with FPC tabs Y3FT Series FEATURES 1. Low-profile, space-saving design (pitch: 0.3mm) The 0.9mm height, 3.0mm depth contributes to the miniaturization
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationFor FPC. FPC connectors (0.2mm pitch) Back lock
0.9 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series AYF21 New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More informationModel Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No. Box of V. Carton of 1, Gray.
Wire-Nut Wire Connectors Yellow and red Wire-Nut Wire Connectors can easily be applied using the Twist-a-Nut Screwdriver. Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationVersaBlade Wire-to-Wire Connection System
VersaBlade Wire-to-Wire Connection System VersaBlade Wire-to-Wire Connection System For Home Appliance Contents 0 Product Overview 05 Feature and Benefits 0 Specifications 07 Mating Structure Ordering
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationØ1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT
SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE FEATURES
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE (60A type only) RELAYS A PC board type 80A Connector type 60A Screw terminal type A TM type 300A Connector type RoHS Directive compatibility
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationPoke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationRECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
More informationGeneral Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
More informationD Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
More informationComponents for low voltage panel boards
omponents for low voltage panel boards UTUMN UTOMTION N ONTRO EETRI ISTRIUTION OEM Products catalogue Ω OK - Unipolar terminal locks PROUTS Ω OK IT 80-11 IT 80-15 G IT 80-7 W IT-S IN35 TEHNI FETURES 31
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationLANBS6FD. Installation Instructions. Lankota Bean Saver Brush Kit for JD 6XX Series Flex Draper Heads
LANBS6FD Installation Instructions Lankota Bean Saver Brush Kit for JD 6XX Series Flex Draper Heads 270 West Park Avenue Huron, SD 57350 866-526-5682 Page 1 Numerical Parts List Part Numbers Description
More informationDistinctive Characteristics
Distinctive haracteristics Extremely low profile of. (.mm) from P to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination
More informationuk.rs-online.com (UK) (International)
Thermocouple onnector Selection Guide uk.rs-online.com (UK) www.rs-components.com (International) International Thermocouple olour odes for onnector odies ll thermocouple connectors use true thermocouple
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationULTRA LOW PROFILE 2 AMP. POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTR LOW PROFILE MP. POLRIZED RELY TK-RELYS.6.47 9..34 4..7 FETURES Low profile 4 mm.7 inch height High contact capacity: Surge withstand voltage between contact and coil: V (ellcore rating) SPEIFITIS
More information2 AMP. HIGH CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE FEATURES. Characteristics. Initial breakdown voltage
TESTING 2 MP. HIGH PITY RELY WITH HIGH SURGE VOLTGE & HIGH REKDOWN VOLTGE TX-RELYS 8.4.33 FETURES reakdown voltage between contacts and coil: 2, V Surge withstand between contacts and coil: 2, V High contact
More informationRated current. Dielectric withstanding voltage
mm Pitch Connectors HDR series Interface Connectors Outline HDR series connectors are very small surface mount (SMT) interface connectors with their contacts arranged at a pitch of mm, designed for the
More informationPrinted Circuit Board Terminals and Disconnects
onents.com Printed ircuit oard Terminals and Disconnects Table of ontents 2 Disclaimer While Tyco Electronics orporation and its affiliates referenced herein ( Tyco Electronics ) have made every reasonable
More informationEMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
More informationHigh Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
More informationHigh Capacity of Max. 1,000 V DC Cut-off Possible
EP (A (AEP) and 80A types) High Capacity of Max.,000 V DC Cut-off Possible EP RELAYS (AEP) A PC board type A TM type New A TM type 80A type 300A type Compliance with RoHS Directive FEATURES. High-, high-current
More informationEurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
More informationSunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height
Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB
More informationAMP Power Lock Connectors
Product Facts High current handling capability: 31 or 53 amperes maximum depending on application (reference product specs) Modular housings for multiple connector applications Assortment of mounting accessories
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE RELAYS (60A type only) 0A PC board type 0A TM type 60A Screw terminal type 80A Connector type 300A Connector type FEATURES. High-, high-current
More informationEurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationLOW PROFILE 2 FORM C RELAY mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC 30 W, 62.5 V A 30 W.
TESTING LOW PROFILE 2 FORM RELY TQ-RELYS 9.34 26.7 +.4..2 +.6.8 4. 9.34 +.4.2 +.6.8 FETURES High sensitivity: 2 Form : 4 power consumption (single side stable type) 4 Form : 28 power consumption (single
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE RELAYS (60A type only) A PC board type A TM type 60A Screw terminal type 80A Connector type 300A Connector type Compliance with RoHS Directive
More information