OUTLINE FEATURES SPECIFICATIONS MATERIAL/FINISH
|
|
- Peregrine Cain
- 5 years ago
- Views:
Transcription
1 OUTLINE IP Push-On CM1 series with -D has black trivalent chromium treatment and is a connector which is in compliance with RoHS directive. D type is a small sized waterproof circular connector with push on and turnoff unlocking mechanism. The plug will be easily locked with the receptacle when you push on. Rotating the coupling ring, the plug will be unlocked when you need to unmate. The plug can not be unmated from the receptacle by such an unexpected force like the cable being pulled. CM1 with -D has a solid construction with the metal shell. The weight of the connector is lighter with the light metal backshell and the resin clamp nut than the CM1 series connectors which we had released earlier. CM1 series with -D can be used with a wide range of applications since it is small size and waterproof connector. FEATURES 1. Solid structure with a metal shell. One touch and reliable locking mechanism of push on and turnoff 3. With a grounding contact (Position 1). Angle plug available for low-profile mounting 5. Finish : Black trivalent chromium treatment (RoHS compliant finish) SPECIFICATIONS Contacts 1 Contacts Rated Current 3A Max. / Contact Rated Voltage V AC(r.m.s.) Max Dielectric Withstanding Voltage 1,5V AC(r.m.s.) / 1 minute 9V AC(r.m.s.) / 1 minute Insulation Resistance 1,M Ω Min. at 5V DC Operating Temperature Range -5 to +85 Conductor Size # Protection Rate IP when mated (Receptacle : Individually waterproof) Receptacle Soldering only, AWG max. Crimp:1AWG-AWG Soldering Use,:1AWG Max. Receptacle Soldering Use,:AWG Max Crimp:AWG-8AWG Soldering Use,:AWG Max. MATERIAL/FINISH Receptacle Pin Front Insulator Synthetic Rubber/Black Pin Rear Insulator Plastic(UL9V-)/Black Pin Contact Copper Alloy/Gold Plating O Ring(Mounting Side) Synthetic Rubber/Black Receptacle Shell Zinc Alloy/Trivalent Chromium Finish(Black) Retaining Ring Copper Alloy/Nickel Plating Ground Lug Copper Alloy/Gold Plating Socket Cover Insulator Socket Insulator Fixed Pin Socket Contact Coupling Ring O Ring(Mating Side) Shell Spring Backshell Bushing Cable Clamp Clamp Nut Retaining Ring Plastic(UL9V-)/Black Plastic(UL9V-)/Black Copper Alloy/Nickel Plating Copper Alloy/Gold Plating Zinc Alloy/Trivalent Chromium Finish(Black) Synthetic Rubber/Black Zinc Alloy/Trivalent Chromium Finish(Black) Stainless Steel Aluminum Alloy/Trivalent Chromium Finish(Black) Synthetic Rubber/Black Plastic(UL9V-)/White Plastic(UL9V-)/Black Stainless Steel
2 CM1 Series 1-Contact Contact Style : Socket Termination:Solder or Crimp The contact is sold separately. (51.) Straight Right Angle () (51.) 3 Straight Right Angle Cable Outside Dia. CM1-SP1S-S-D CM1-AP1S-S-D φ. φ. CM1-SP1S-M-D CM1-AP1S-M-D φ. φ 9. CM1-SP1S-L-D CM1-AP1S-L-D φ 9. φ 11. (3.5) CM Note: The applicable cable outside diameter is in the case of cabtyre cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. (3.5) Contact of 1-Contact Loose Piece Contact (1 pcs in 1 bag ) Conductor Size Insulation Dia. Hand Tool CM1-#SC(C1)(D8)-1 AWG φ 1.1 φ J-5T Crimping Type CM1-#SC(C)(D8)-1 3 8AWG φ.8 φ J-5T CM1-#SC(C)(D8)-1 AWG φ.95 φ J-5T Soldering Type CM1-#SC(S1)(D8)-1 AWG Max. φ 1.8 Max. Extraction Tool 35J-558T 1. The packaging specification is 1 pcs of contacts per bag for sale..both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. The semi-automatic crimping machine is required when you terminate the reel contacts. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) Semi-Automatic Crimping Machine Extraction Tool ( 5, pcs on 1 reel ) Conductor Size Insulation Dia. 1set Applicator CM1-#SC(C1)(D8)-5 AWG φ 1.1 φ 1.8 AP-A5539T AP-A5539T-1 35J-558T CM1-#SC(C)(D8)-5 3 8AWG φ.8 φ 1.5 AP-A55T AP-A55T-1 CM1-#SC(C)(D8)-5 AWG φ.95 φ 1.9 AP-A5T AP-A5T-1 1. Both of AP5539T and AP55T are the set part numbers which include both of the semi-automatic crimping machines and the applicators (stripper crimpers).. Each of AP5539T and AP55T contains exactly the same semi-automatic machine. Therefore if you change the applicator, you can terminate both of CM1-#SC(C1)(D8)-5 and CM1-#SC(C)(D8)-5 by one semi-automatic crimping machine. CM1-#SC(C1)(D8)- CM1-#SC(C)(D8)- CM1-#SC(S1)(D8) 品名 (# ソケットコンタクト ) 数量符号図番部品名称材質処理 他承認設計形式品名 (#ソケットコンタクト) 機番江嶋 図番部品名称材質処理 他承認設計形式品名品名 (#ソケットコンタクト ) 機番
3 -Contact CM1 Series Contact Style : Socket Termination:Solder or Crimp The contact is sold separately. Straight Right Angle () 1 3 (51.) Straight Right Angle Cable Outside Dia. CM1-SPS-S-D CM1-APS-S-D φ. φ. CM1-SPS-M-D CM1-APS-M-D1 φ. φ 9. () CM1-SPS-L-D CM1-APS-L-D φ 9. φ Note: The applicable cable outside diameter is in the case of cabtyre cable. Regarding the wiring tools, please refer to the instruction manuals attached on the top-page of this connector catalogue. 3 (3.5) (3.5) Contact of -Contact Loose Piece Contact ( 1 pcs in 1 bag ) Conductor Size Insulation Dia. Hand Tool Crimping Type CM1-#SC(C3)(D8)-1 1 AWG φ 1.8 φ.5 35J-58T Soldering Type CM1-#SC(S)(D8)-1 1AWG Max. φ 3. Max. Extraction Tool 35J-558T 1. The packaging specification is 1 pcs of contacts per bag for sale..both of the solder contacts and the crimp contacts shall be inserted into the inserts of the connectors after soldering the contacts to the cable or crimping the contacts with the cable. Reel Contact for Semi-Automatic Crimping Machine (Crimping Style Only) (, pcs on 1 reel ) Semi-Automatic Crimping Machine Extraction Tool Conductor Size Insulation Dia. 1set Applicator CM1-#SC(C3)(D8)- 1 AWG φ 1.8 φ.5 AP-A551T AP-A551T-1 The semi-automatic crimping machine is required when you terminate the reel contacts. 35J-558T 1. Due to the construction of CM1-#SC(C3)(D8)- you can only make the crimping process by AP551T. So the process of striping cable shall be made in advance.. AP551T is a set part number which includes both of the semi-automatic crimping machine and the applicator (crimper). CM1-#SC(C3)(D8)- CM1-#SC(S)(D8)- φ.1 3 数量符号図番部品名称材質処理 他 承認検図 設計形式品名 (#ソケットコンタクト ) 機番江嶋寸法角度 '8.. 一般 CM1-#SC(C3)(D8)- 製写公差 ±.1 ±3 図番改版 品名 処理 他 (# ソケットコンタクト ) 5
4 Receptacle CM1 Series 1 Pins Pin contact style only Soldering termination only CM1-R1P-D(D) Conductor Size : AWG Max. Individually waterproof Contact No.1 grounded to shell with ground lug (.9) Main key positon mark φ1 φ φ φ φ (13.) ( ) min. 1. ±.1 Mounting Dimensions -M3 Pins CM1-RP-D(D) Pin contact style only Soldering termination only Conductor Size : AWG Max. Individually waterproof (.9) Main key positon mark φ1 φ15.3 φ φ φ (13.) ( ) min. 1. ±.1 -M3 Mounting Dimensions
5 CM1 Series Mated Dimensions Receptacle + Straight Receptacle + Right Angle (.3) 3. (33.5) (5) 3. Dust Cap for Receptacle & Cable Receptacle CM1-R-DC Material : Plastic Color : Red φ1.3 φ1.8 φ..9 Supporting Cover Straight Right Angle CM1-SP-CV CM1-AP-D-CV CM1-SP-CV-A/B 外観 () 5
DeviceNet Mini-style Connectors
DeviceNet Mini-style Connectors CM03A Series (Overmolded Cable Assembly) Conforming Standard DeviceNet Waterproof IP 67 ock Type Threaded Coupling OUTINE CM03A series is a overmolded cable assembly which
More informationSmall Circular Connector. JN1/JN2 Series. Dust Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series Angle Plug CONNECTOR MB-0054-8 October 2009 [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
More informationD Subminiature Combo D
Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More informationPowerpole Connectors - PP120: up to 240 Amps
Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationAmphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationSBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationEthernet & High Speed Networks. Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646
Ethernet & High Speed Networks Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646 Quadrax Contact Presentation Today s technology for Aeronautic and Military equipment is more and more complex,
More informationSBE 320 / SBX 350 Connectors - up to 350 Amps
Connectors - up to 350 Amps ORDERING INFORMATION SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. Sequencing within auxiliary positions
More informationJDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
More informationJune 24, 2004 V No. Messrs. SPECIFICATION XFPM-050KPG(R)-P3. Model: RoHS compliance. Project: Reference: Fujikura Ltd.
June 24, 2004 No. V-7437 Messrs. Model: SPECIFICATION XFPM-050KPG(R)-P3 RoHS compliance Project: Reference: Fujikura Ltd. 7437_XFPM-050KPGR-P3_specs V-7437 1. General; This document details the performance
More informationHB01 Series Waterproof Cable-to-Cable Connector
v1.0 HB01 Series Waterproof Cable-to-Cable Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2016, Japan Aviation Electronics Industry, Ltd. JAE HB01
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More information75 Ω SSMB Type Connectors
7 Ω SSMB Type Connectors SSMB7 Series FEATURE SSMB7 series are connectors for 7 Ω group of SSMB series ( Ω group). DDK s originally developed 7 Ω group connectors are super mini size push on type. Frequency
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More information[ 21.3 ] 0.84 A [ 13.0 ] 0.51
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More informationSBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More informationMiniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationSECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationLESLIE CONSOLE CONNECTOR KIT 8400 INSTALLATION INSTRUCTIONS
LESLIE CONSOLE CONNECTOR KIT 8400 INSTALLATION INSTRUCTIONS FOR USE WITH: LESLIE Speaker Models: 122, 122RV, 222, or 222RV in conjunction with HAMMOND Speaker HAMMOND Organ Models: A, B, C, D, E, RT, BV,
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationD-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationHigh Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More informationCTC Series. Environmentally sealed cable-to-cable interconnects
CTC Series Environmentally sealed cable-to-cable interconnects We Connect When it matters most For more than a century, ITT Cannon has developed innovative interconnect solutions for the world s harshest
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More informationElectrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
More informationCannon Trident Connectors
Contacts General recommendations for the selection of Trident contacts are listed below. Platings: Tin is recommended for most applications (with 50 or fewer mating cycles). It is cost effective and matches
More information6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
More informationFCDB (Fibre-Channel Data Bus) & Ruggedized High Speed Solutions
FCDB (Fibre-Channel Data Bus) & Ruggedized High Speed Solutions Souriau Solutions Souriau offers a complete ruggedized cabling solutions for pointto point, featuring Fibre-Channel technology with the FCDB
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More informationASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES
ASSEMBLY, INSTALLATION, AND REMOVAL OF CONTACTS AND MODULES FOR HIGH POWER CONTACTS AND MODULES Table of Contents SECTION 1 RECEIVER CONTACT ASSEMBLY INSTRUCTIONS SECTION 2 ITA CONTACT ASSEMBLY INSTRUCTIONS
More informationMicro Coaxial Connector. Ultrasmall Series with mating height 1.00 mm
MCC Micro Coaxial Connector Ultrasmall Series with mating height 1.00 mm IEEE802.11a b g n WiMAX Bluetooth Zigbee MIMO (Multiple input and multiple output) 1 USS RF V Plug Cable Assembly Mating height
More informationUT0W. Présentation. The TRIM TRIO high density concept. Laboratory & Test Center. Design & Development. Quality Assurance
Présentation Company profile Description SOURIAU is focused on the supply of connection technologies for severe environment. Our Company has a presence in the world's major aerospace / defense programs
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More informationCATALOG. AEROSPACE * MEDICAL * AUTOMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949)
CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MICRO CONNECR REFERENCE MILSPECWEST MICROTECH COMTRONICS DESCRIPTION MSW-G-B-02S-040* DP-2S-1 CMR-O2-B-02S
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationMiniature Circular Plastic Connector (CPC)
Miniature Circular Plastic Connector (CPC) Application Specification 16 SEP 03 Rev O All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationMaximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
More informationPRODUCT SPECIFICATION
i TM / i+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS, PLATING AND MARKINGS... 3.3 SAFETY
More informationI-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More informationMX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM
MX150L tm INDUSTRIAL SEALED CONNECTOR SYSTEM The MX150L Industrial Sealed Connector System is IP67 rated and conforms to UL 1977, but it is NOT suitable for automotive applications with requirements such
More informationSERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
More informationSIGNAL // POWER // INDUSTRIAL ETHERNET
CIRCULAR CONNECTORS SIGNAL // POWER // INDUSTRIAL ETHERNET 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric and heating areas. The medium
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationUSB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
More informationAmphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications
Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems
More informationSTANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
More informationHyperboloid Contacts for High Performance Connectors
Hyperboloid Contacts for High Performance Connectors ICS SERIES Technology Company, Inc. integramate Hyperboloid Contacts QA Technology integramate Contacts are high quality, high reliability hyperboloid
More informationMILITARY AEROSPACE INDUSTRIAL PRODUCT RANGE
MILITARY AEROSPACE INDUSTRIAL PRODUCT RANGE ABOUT US VGL Impex Pty Ltd, trading as Allied Connectors, is an Australian based distributor of industrial electrical components and complementary products.
More informationHigh Leverage Combination Pliers
Wiha Pliers & Cutters, professional quality at competitive prices. A wide selection covering most applications in which pliers & cutters are required. 64HRC Cutting Edges Wiha SoftGrip Pliers & Cutters
More informationCABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
More informationCM10-AP S- -D Angle Plug Connector (Soldering type) Cable Assembly Manual
CM10-AP S- -D Angle Plug Connector (Soldering type) Cable Assembly Manual DDK Ltd. 2ND Production engineering department assembly group 14 Matsuyama-cho, Moka-shi, Tochigi TEL : 0285-82-4463 Date of Issue:
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More informationI-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More informationSMP Series RF Coaxial Connectors
SMP Series RF Coaxial Connectors Brief Introduction l l l l Miniature push type RF Coaxial Connectors Small size, saving mounting space to the max, the operating frequency range DC ~ 4GHz Excellent electrical
More information711 Series Single Way DB-1a
711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationMedium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
More informationYL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
More informationCM10-AP S- (D6) Angle Plug Connector (Weight saving type Crimp Type) Cable Assembly Manual(Standard Type)
CM10-AP S- (D6) Angle Plug Connector (Weight saving type Crimp Type) Cable Assembly Manual(Standard Type) DDK Ltd. 2ND Production engineering department assembly group 14 Matsuyama-cho, Moka-shi, Tochigi
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 114-16016 17 APR 14 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Unless
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationSMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
More informationModel Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No. Box of V. Carton of 1, Gray.
Wire-Nut Wire Connectors Yellow and red Wire-Nut Wire Connectors can easily be applied using the Twist-a-Nut Screwdriver. Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring
More informationAMP Precision Pin and Socket Contacts. Spring, Stainless Steel. Pin
Signal Contacts Type III+, Crimp, Snap-In [.0625 +.0010.0020 [1.588 +0.025 0.051] Body Spring, Stainless Steel Spring, Stainless Steel [9.91] Min. Ferrule, Brass, Nickel Flash.113 [2.87] Max. and See chart.
More informationTechnical Information
UTO Series Technical Information Tooling... 2 Crimping Instructions... 3 Handle & Interchangeable Heads... 5 Extraction Tools... 6 Assembly Instructions... 7 1 Tooling Standard contacts Contact size #12
More informationCABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
More information