Miniature push-pull connectors with ground function
|
|
- Emil Hubbard
- 5 years ago
- Views:
Transcription
1 Miniature push-pull connectors with ground function MXR Series Features 1. User friendly lock mechanism The single action push-pull lock function allows quick connections and disconnections as well as high density mounting. 2. Grounding function for FCC compliance Metal, outer shell provides stable contact for grounding.. Sequential contact structure A sequential mating type is available. This version allows for the contacts to mate in a sequenced order. Product Specifications Rated current Ratings Rated voltage Operating temperature range Storage temperature range Number of contacts Number of contacts to +85 ç -1 to +6 ç Rated current 2A Rated voltage AC 1, DC 14 V Items Specifi cations Conditions 1. Contact resistance A maximum of 2 mø Measured at DC 1 A 2. Insulation resistance A minimum of 1, Mø Measured at DC 1 V. Withstanding voltage No flashover or dielectric breakdown. AC V for one minute 4. Vibration resistance 5. Shock resistance No electrical discontinuity for 1 µs or greater. No electrical discontinuity for 1 µs or greater. 6. Mating cycles Contact resistance : a maximum of 4 mø 1, times 1 to 55 Hz/cycle, amplitude:.75 mm, axis directions, 2 hours each Acceleration : 49 m/s 2, duration : 11 ms axis directions, times each 7. Temperature cycle 8. Moisture resistance Insulation resistance : a minimum of 1, Mø Insulation resistance : a minimum of 1 Mø (at high humidities) a minimum of 1 Mø (when dry) -55ç : minutes Normal temperature : 1 to 15 minutes 85ç: minutes Normal temperature : 1 to 15 minutes, left for 5 cycles Temperature : 4 C, relative humidity : 9 to 95%, left for 96 hours Materials Part Material Finish Remarks Shell Aluminum alloy Nickel plating Insulator PBT resin UL94V- Contact Copper alloy Gold plating, partial gold plating w 1
2 Product number structure MXR - 8 P A - P B (**) qseries name : MXR Series wshell size : Indicates the outer shell diameter at the mating end. eshell classifi cation : Classified as follows P : Plug R : Receptacle r Shell modifi cation : The letters A, B, C, D, E, etc. indicate modifi cations of the shell form. tpin arrangement : Indicated by the number of pins ypin form : Classifi ed as follows P : Male contacts S : Female contacts u Pin modification : The letters A, B, C, D, E, etc. indicate modifications of the pin form. ispecial specifi cations: A two-digit number is added to indicate other specifi cations, such as (1), (2), ()... Plug Suitable cable diameter ØB 1 2 Ø1.9 MXR-8P-8P(71) A (Representative shape example) Part No HRS No. A ØB Weight Bushing Remarks MXR-8PA-PB(71) MXR-8PA-4PB(71) g Sequenced construction Black MXR-8PA-6PB(71) MXR-8P-8P(71) g MXR-8P-8P(72) White Note: Cable pull force, twisting strength and other characteristics may differ, depending on cable specifications and structure. Please evaluate under the actual conditions prior the use. Receptacle (Secured with hex nut for mounting) Solder termination Panel Guide Ø1.5 Ø MXR-8RA-8S(71) 19 A 9 (Representative shape example) Part No. HRS No. Weight A Remarks MXR-8RA-S(71) MXR-8RA-4S(71) g MXR-8RA-6S(71) MXR-8RA-8S(71)
3 Receptacle (Flange type) Dip termination Panel M Guide Ø1.5 Min. Ø MXR-8R-8SA(71) (Representative example) Part No. HRS No. Weight Remarks MXR-8R-SA(71) MXR-8R-4SA(71) MXR-8R-6SA(71) g with gold-plated contacts MXR-8R-8SA(71) Layout dimensions for dip post contacts 4.1±.5.8±.5 -Ø pin 1.9±.5 1.9±.5 Ø Ø ±.5 Ø ±.5 4-Ø pin 2±.5 2-Ø ±.5 2.1±.5 1.7±.5 1.5±.5 1.5±.5 2.±.5 1.7±.5 1.2±.5 1.2±.5 2±.5 2±.5 2.9±.5 4.1±.5 1.2±.5 1±.5 2.2±.5 6 pin 2±.5 2±.5 1.9±.5 1.9±.5 6-Ø Ø ±.5 2±.5 2-Ø ±.5 1.4± ±.5 2.±.5.5±.5 8-Ø ±.5.98± ±.5 8 pin.41± ±.5 Ø ± ±.5 2-Ø ±.5.77±.5.5±.5 Remarks : Figures are views from the mating side of the receptacle. Marks show the position of the guide.
4 Wiring and Assembly Procedure MXR-8PA-PB(71), MXR-8PA-4PB(71), MXR-8PA-6PB(71) P shell unit Clamp Plug body Cable bushing Cable 7 or greater Spanner spacing of Work Procedure 1. Pass the cable through the components in this order: 1. cable bushing, 2. plug body,. clamp fitting. Then perform the cable end processing. 2. Solder the wires to the P shell unit.. Align the protruding portion of the clamp with the recessed portion of the P shell unit and mount. 4. Align the plug and cable sheath strip position, then tighten the plug body to the screw portion of the P shell unit with a torque of 1 N m. Note that to prevent loosening, an application of Locktight 26 manufactured by HENKEL JAPAN LTD. is recommended. 5. Put the cable bushing over the clamp body to complete the job. MXR-8P-8P(71) P shell unit Clamp fitting Plug body Cable bushing Cable 2 or greater Boss Set screw 18 Spanner spacing of 1 Work Procedure 1. Pass the cable through the components in this order: 1. cable bushing, 2. plug body. Then perform the cable end processing. 2. Solder the wires to the P shell unit.. Fasten the clamp fitting to the cable with the cable crimping tool (HR1A-TC-4). 4. Tighten the clamp body to the screw portion of the P shell unit with a torque of 1 N m. Note that to prevent loosening, an application of Locktighe 26 manufactured by HENKEL JAPAN LTD. is recommended. 5. Tighten the set screw so that the tip falls into one of the two bosses of the clamp fitting. Note that a tightening torque of. N m. is specified. 6. Put the cable bushing over the clamp body to complete the job. 4
5 Dimensions for receptacle mounting holes Guide position Ø ±.5 Guide position Ø Ø Panel thickness 1 to 4mm (Jam Nut Type) NOTES : 1. Above figures are views from the mating side of the receptacle. Also note that the symbol indicates the guide position. 1.5±.5 Panel thickness Max 1.6mm (Flange Type) Applicable Tools Type Part No. HRS No. Applicable Connectors Tightening jig MXR-8P-T All plug products Cable crimping tool HR1A-TC MXR-8P-8P MXR-8P-T1 HR1A-TC-4 Pin arrangement and electrical specifications Number of contacts Pin arrangement Withstanding voltage Current capacity Insulation resistance Contact resistance Solder pot diameter V AC for 1 minute 2 A 1, Mø or greater at 1 V DC 2 mø or less at 1A DC.9 mm dia. NOTES : 1. Above figures are views from the mating side of the receptacle. Also note that the symbol indicates the guide position. 2. The withstand voltage value indicates the test voltage. The connector should normally be used at less than 5 V AC or 7 V DC. 5
6 HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 2688 Westhills Court, Simi Valley, CA Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 255 Scott Boulevard, Building 7, Suite 11 Santa Clara, CA 9554 Phone : Fax : HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE 58 Waters Edge Lane, Suite 25 Lombard IL 6148 Phone : Mail : inquiries@hirose.com HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) Laurel Office Park III Laurel Park Drive Suite 25 Livonia, MI Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE Muggenhofer Str Nuernberg Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 111 CC Amsterdam Z-O Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr., Haus C 855 Langenhagen, Germany Phone : Fax : GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Herzog-Carl-Strasse 4 D-776 Ostfildern (Scharnhauser Park) Phone : Fax : FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 9225, France Phone : + () Fax : + (1) UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 161, Henderson Metropolitan, NO., East Nanjing Road, Huangpu District, Shanghai, China 21 Phone : Fax : CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A11, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 125 Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 9-1, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 52 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 5188 Phone : Fax : KOREA: HIROSE KOREA CO., LTD , Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : ,7124 Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No., Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 5666 Karnataka, India Phone : Fax : HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 11, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 1 Anson Road #26-1, International Plaza 799, Singapore Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD , Penang Cybercity (1164),Lintang Mayang Pasir,1195, Bayan Baru, Penang, Malaysia. Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 1 8F, No.87, Zhengzhou Rd., Taipei Phone : Fax : INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.519, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 211, Uttar Pradesh, India Phone : Fax : THAILAND: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 47, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 112 Thailand Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 1/215. Contents are subject to change without notice for the purpose of improvements.
2.92mm coaxial connectors based on MIL Specifications
2.92mm coaxial connectors based on MIL Specifications 2.92mm Series Functional diagram Straight plug HK-P-SF085 Plug side Features 1. 2.92mm coaxial connector based on MIL Specifications (MIL-STD-348B)
More informationPush-On Lock, SMPM Coaxial Connectors in MIL Standard
Push-On Lock, SMPM Coaxial Connectors in MIL Standard SMPM Series Product Specifications Ratings Nominal characteristic impedance 50ø Rated frequency DC to 65GHz Compatible with 65GHz configurations Features
More informationMiniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions.. Features. Small high density Outer diameters - plugs (max): mm :, and positions mm : 2, and positions 2. Simple push-in/ pull-out mating
More informationMiniature Push-Pull Circular Connectors
Miniature Push-Pull Circular Connectors HR2 Series Mated dimensions. pr..2 Copyright 2 HIROSE ELECTRIC CO., LTD. ll Rights Reserved. Features. Small high density Outer diameters - plugs (max): mm :, and
More information1.85mm coaxial connectors based on IEC Specifications
Jul.017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 5mm coaxial connectors based on IEC Specifications 5mm Series Product Specifications Ratings Nominal characteristic impedance 50ø Rated
More informationMiniature Interface Coaxial Switch, DC to 10 GHz
Miniature Interface Coaxial Switch, DC to 10 GHz MS-162B Series Features 1. Wide frequency range Applicable frequencies range from DC to 10 GHz. 2. Low insertion loss 0.15 db MAX (DC to 2 GHz) 0.2 db MAX
More informationMicro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Fig.1 Overview Extremely small highly reliable connectors
More information0.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding
.4mm Pitch, 1.5mm Board-to-Board Connectors with Dual Shielding FX12 Series Dual Shields (when mated) [Patented Design] Features 1. Dual shields Built-in shield plates and metal fittings in the plugs and
More informationMicro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB
More informationMicro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB
More informationPlastic Push-Pull Lock Connectors
Plastic Push-Pull Lock Connectors RP13 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability A secure mating condition is achieved by simply pushing
More information2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
More informationPlug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Jun..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. 5Ω-based NC connector, 75Ω type NC type products are widely used as 5ø connectors. Hirose s NC75
More information45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
More informationMicro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB
More information45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG
More informationMicro-USB connectors meeting USB 2.0 Standard
Micro-USB connectors meeting USB 2.0 Standard ZX Series Overview Extremely small highly reliable connectors complying with physical, electrical and environmental requirements of Micro-USB standard (USB
More informationSubminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
Subminiature Coaxial Switch.35 mm High, DC to Hz MS-56C Series Overview Features. Low insertion loss 0.5 db MAX (DC to 2.5Hz) 0.2 db MAX (2.5Hz to 6Hz) 0.4 db MAX (6Hz to Hz) (NORMALLY CLOSED) Space-saving
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height
Ultra Small Surface Mount Coaxial Connectors 1.4mm or 1.65mm Mated Height W.FL Series Occupied Mounting Area Features 1. Nominal mated height of 1.4mm or 1.65mm (Max. 1.55 or 1.85mm)(Fig.2) 2. Small board
More information2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series Features Common to all series 1. High Operating Temperature DF59 s are
More information2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin)
2mm Pitch, Multi Functional Connector System (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short-Circuit Pin) DF59 Series DF59 floating amount ±0.5mm(X,Y, Z directions) Features Common to all
More information15 + Gbps 0.5mm pitch Stacking Connectors
Housing Metal fitting 15 + Gbps.5mm pitch Stacking Connectors FX1 Series Electrical Interface for the OIF 1G Long-Haul DWDM Transmission Module (MSA-1GLH) With GND Plate Type Ground plate and metal fitting
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More information65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply
Features 65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply DF60 Series 1. High current capacity Capable of going to a max. of 65A when using 8 AWG with the single position connector.
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More information65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply
65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Unique locking mechanism is contained inside the header Socket and header design avoids
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More informationMiniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
More informationPlug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
More informationUltra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
More information75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More informationHigh Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
More informationDC Power Jacks DCP07 E-03
DC Power Jacks DCP0 E-0 Contents Contents & Specifications DC Power Jacks( RC-0A Standard) Product Lineup DC Power Jacks DC Power Jacks Product Lineup DC Power Jacks for Automotive Equipment Use DC Power
More information2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
More informationSC06 E-03. AC Inlets Power Supply Connectors
ELE C T R ONIC COMPON E N T S SC0 E-0 AC Inlets Power Supply Connectors Contents Contents... Power Supply Connectors Low-Profile Type Poles... 5 Poles... Standard Type Poles... Poles... 5 to 5 Poles...
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More informationELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More informationDC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
More informationCOMPACT HIGH POWER RELAY
COMPACT HIGH POWER RELAY For automotive applications POLE - 6A (For 2V Car Battery) FBR59-HW Series FEATURES pole, 6A, form U High temperature grade (-4 C to 25 C) Comparable capability with Power Mini
More informationRECTANGULAR CONNECTORS
RETANGULAR ONNETORS FN-360 SERIES FEATURES Many applications Various connectors are available for connection by means of soldering, wire wrapping, crimping, P board mounting, and insulation displacement
More informationCoaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationCAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationModular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
More informationMINIATURE LOW NOISE RELAY
MINIATURE LOW NOISE RELAY POLE - 5A (For V car battery) FTR-P7 Series FTR-K SERIES FEATURES Miniature size, form C Low noise (average acoustic noise level: 5dB, distance 5cm) High contact capacity (5A,
More information1 POLE - 1 to 2A (For Signal Switching)
MINIATURE RELAY 1 POLE - 1 to A (For Signal Switching) SY Series FEATURES Very small size and light weight UL, CSA recognized Conforms to FCC rules and regulations part 68 Dielectric strength 00 VAC between
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationI-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More information242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationI-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More informationSPEC Pak. Sealed Power For Environmental Connections. Anderson Power Products. Marine Wind Power Lighting Transportation Pumps Ground Support
SPEC Pak Sealed Power For Environmental Connections Marine Wind Power Lighting Transportation Pumps Ground Support Machine Tool Industrial Automation Motor Solar Power Harsh Environments Anderson Power
More informationCAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
More information0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More informationkwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
More informationBNC 75 OHM CONNECTOR PRODUCTS
BNC 75 OHM CONNECTOR PRODUCTS ADC's BNC Connectors are the most reliable and universally accepted method of terminating coaxial cable in the market today. Outstanding electrical performance (up to 3 GHz)
More informationSMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationSMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
More informationAVX Wire-to-Wire Connectors
AVX Wire-to-Wire Connectors www.avx.com Version 13.8 Table of Contents THRU-WIRE CONNECTORS............................................................................................. 2-8 18-26 AWG 1
More informationMemory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
More informationCOMPACT POWER RELAY. FBR51, 52 Series. 1 POLE - 25/30A (For automotive applications)
COMPACT POWER RELAY POLE - 2/3A (For automotive applications) FBR, 2 Series FEATURES Compact and light weight structure High current contact capacity (carrying current: 3 A/ minutes, 3 A/ hour) High resistance
More information1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
More informationApplications SCF Type Dimension Code (See Table 1) Rated Current (A) Minimum Inductance (mh)
AC Line Filters SC Coils, SCF Compact, High-inductance Type Overview The KEMET SC Coils, SCF Compact, High-inductance Type AC line filters are offered in a wide variety of sizes and specifications. Applications
More informationEMI Core ESD-SR-H/HL Series Snap-on Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism
EMI Core ESD-SR-H/HL Series Snap-on Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism Overview The KEMET ESD-SR-H/HL Series snapon cores feature high heat resistance and a cable
More informationCannon Trident T2P Contact. Interconnect Solutions
Cannon Trident T2P Contact Interconnect Solutions Trident T2P stamped and formed contact Technical overview ITT has been manufacturing Trident contacts for decades. These contacts have enjoyed a rich history
More informationCannon Trident T2P Contact. Interconnect Solutions
Cannon Trident T2P Contact Interconnect Solutions Trident T2P contact system Features & Benefits ITT introduces a new design and enhanced version of the well known T2P stamped and formed contact system.
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More information