Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz

Transcription

1 Subminiature Coaxial Switch.35 mm High, DC to Hz MS-56C Series Overview Features. Low insertion loss 0.5 db MAX (DC to 2.5Hz) 0.2 db MAX (2.5Hz to 6Hz) 0.4 db MAX (6Hz to Hz) (NORMALLY CLOSED) Space-saving design Low profile:.35 mm protrusion above the board. Lightweight: 0.04 g. total weight. 2. Space-saving design 2.3 mm x 2.3 mm occupied board space. 3. Low profile MS-56C Series.35 mm high above the board. 4. Lightweight Comparison with our conventional type 0.04 g. total weight mating/unmating cycles, with corresponding plug. Conventional type Footprint B o a r d p l a c e m e n t w i t h a u t o m a t i c equipment Packaged on tape-and-reel.. Halogen Free, Beryllium free C h l o r i n e, a n d b r o m i n e a r e n o t u s e d i n t h e receptacles. *Definition according to IEC Br 00 ppm max., Cl 00 ppm max., and Br + Cl 500 ppm max % saving of space Height.35 Applicable frequencies range over a wide band, from DC to Hz Performs over a wide frequency range Developed for inspection of high frequency circuits used in portable terminals.verification of the circuit performance is accomplished by simply inserting the external plug in the board mounted receptacle.this action re-directs the circuit from normal condition to the plug side. Removing the plug restores circuit to its normal condition. 5% lower profile Weight 0.025g 0.04g 44% lighter weight 205.w

2 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Product Specifications Unmated Operating temperature range Rated power Frequency range V.S.W.R. Mated with MS-56-HRMJ-3 plug -40ç to +5ç -40ç to +5ç 2W DC to Hz.2 max.(dc to 2.5Hz) 2W DC to Hz.4 max.(dc to 3.0Hz).3 max.(2.5hz to 6.0Hz). max.(3.0hz to.0hz).5 max.(6.0hz to.0hz) 0.5 db max.(dc to 2.5Hz) Insertion loss Isolation 0.5 db max.(dc to 3.0Hz) 0.2 db max.(2.5hz to 6.0Hz) 0. db max.(3.0hz to 6.0Hz) 0.4 db max.(6.0hz to.0hz) 20 db min.(dc to 3.0Hz) 5 db min.(3.0hz to 6.0Hz) 2 db min.(6.0hz to.0hz) 0. db max.(6.0hz to.0hz) Item.Contact resistance 2.Insulation resistance 3.Withstanding voltage 4.Vibration Specification 00 ma max. 00 V DC 00 V AC / minute Frequency:0 to 55 Hz, single amplitude of No electrical discontinuity of µs or 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 40 m/s2, 6 ms duration, sine half- more 5.Shock 6.Temperature cycle 7.High temperature exposure.low temperature exposure.humidity Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. Contact resistance: 00 mø max. Insulation resistance: 0 Mø min. 0. (mating/un-mating, with corresponding plug) Conditions 00 mø max. 000 Mø min. No flashover or insulation breakdown Contact resistance: 00 mø max. wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç / +5ç to +35ç / +5ç /+5ç to +35ç Time: 30 / 5 max. / 30 / 5 max. (Minutes) 50 cycles 6 hours at 5ç 6 hours at -55ç 6 hours at 40±2ç, and humidity of 0 to 5% 00 cycles Note : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Materials 2 Part Material Finish Remarks Shell Phosphor bronze old plated Insulator 6T Nylon UL4HB Common terminal Cu-Ni-Si alloy Selective gold plated Antenna terminal Phosphor bronze Selective gold plated

3 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz BTypical Data NORMALLY CLOSED(N.C) V.S.W.R Insertion loss [db] [Hz] V.S.W.R Insertion loss V.S.W.R [Hz] Insertion loss [db] NORMALLY OPEN(N.O) 7 ISOLATION Isolation V.S.W.R. Insertion loss Isolation [Hz] 3

4 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Receptacle '#( '#( %#+ &#.' Packing ,000 pcs/reel (20) ,000 pcs/reel &#(* 6 izgb^cva izgb^cva Circuit diagram NORMALLY OPEN (N.O) ' %#+ A B C B C %#(* A Plug %#(* NORMALLY CLOSED (N.C) Plug ' %#+ ' &#& BPCB mounting pattern and metal mask dimensions * Request drawing of the specific part for exact dimensions and tolerances. * Specified dimensions must be followed to assure correct board placement and performance. Metal mask dimensions PCB mounting pattern 0. thick This area must be free of conductive traces and resist field C

5 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz BPrecautions. Mounting this product using PCB patterns or metal mask dimensions other than the ones specified, may result in a product malfunction due to solder and/or flux wicking. 2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces. Placing conductive traces in this area may affect performance and will void product warranties. When the bottom surface of the product (i.e., the shaded area of the specified land dimensions diagram on the previous page) has been processed with a susbtrate copper trace and resist processing, Hirose Electric will not be able to warrant the product. 3. Do not use hand soldering for mounting of. Doing so could result in solder and flux wicking to the contact areas. 4. Exercise caution as not to allow any debris to enter the board mounted MS-56C when cutting PCB. -Example of a PCB after mounting the (Position relation between and the web tab) -Example of incorrect mounting- -Recommended exampledesign with no web tab near Web tab Mounted substrate If the is mounted too close to a web tab, there is a possibility that fine powder residue generated during depaneling could infiltrate the swich and cause damage. Optimal design with no web tab near the. 5. This product is intended for use only in testing the circuit. It cannot be used as an interface. 6. Please refrain from using the product in environments specifically affected by excessive vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures such as outdoor equipment. It might cause degradation or destruction of the product.even if it endures during a short time, long time quarification is not quaranteed. 7. Plugs can be roughly classified to two types. - For mass production line automatic check (Press down type) - For manual check (With retentive lock) : Unable to be used at production line.. Do not use the washing process.. Please use a design in which the device housing does not exert pressure or force on the MS-56C in the event that the finished device is accidently dropped. 0. Do not apply heat(heat gun or hot plate) over 260ç for more than 0 seconds. Exceeding this thermal limit could cause the resin to melt and cause deformation.. When automatic inspections are to be performed during the manufacturing operations, request the MS-56 plug connector manual for examples of implementation. 5

6 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz BPacking Specifications ) ' &#.* izgb^cva izgb^cva 6 izgb^cva 6 izgb^cva &' &' ' &#,* &#,* ) ) ) *#* *#* 6 izgb^cva 6 izgb^cva &#* &#* izgb^cva izgb^cva JcgZZa^c\ Y^gZXi^dc JcgZZa^c\ Y^gZXi^dc : : Reel dimentions &'#) *% bvm# ( & JcgZZa^c\ Y^gZXi^dc Reel Size Packing R = Ø30mm 0,000 pcs/reel (20) R = Ø0mm 2,000 pcs/reel BRecommended Temperature Profile 0 sec.max. Temperature (ç) Using Lead-free Solder paste : 260ç q Maximum temperature Time (sec.) 60 sec. to 20 sec. 40 sec.max. 60 sec. to 50 sec. 6 w Peak temperature time : 0 sec. max. e 230ç min. : 40 sec. max. r 220ç min. : 60 sec. to 50 sec. t 0ç to 200ç : 60 sec. to 20 sec. y Metal mask thickness : 0. mm : 2 cycles u Reflow cycles

7 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz BMS-56C Series plugs and adapters <product name> <Page> Cable harness type Press down, right angle type MS-56-C(LP)- MS-56-0LP-H πneeds a test fixture with a floating mechanism for installation. Simplified lock, right angle type πfor evaluation Cannot be used for automated inspection process. For antenna type MS-56-0LP-H2 MS-56C-LP-06 MS-56-HRMJ-H πcannot be used for circuit inspection. SMA conversion Adapters Simplified lock type πfor evaluation Cannot be used for automated inspection process. Press down type πneeds a test fixture with a floating mechanism for installation. Right angle type MS-56-HRMJ-3 MS-56-HRMJ-4 MS-56LP-HRMJ- MS-56-HRMJ-0 0 MS-56-HRMJ-2 0 MS-56-HRMJ-2 0 SMA Conversion Adapter MS-56R-HRMJ- N Conversion Adapter MS-56R-NJ- Floating (self-pressing) πbuilt-in, spring loaded push-down mechanism Stroke length controlled by fixture. Adapter for plug inspection When automatic inspections are to be performed during the manufacturing operations, request the instruction manual titled "MS-56 Plug Connector" which includes examples of actual use. 7

8 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Plugs )" '%#. '# ) &&#&* & Press down, right angle (#' MS-56-C(LP) ,000 Times Applicable cable:.5d-hqew,.5d-qew (Fujikura Ltd.) Simplified lock, right angle, short Ø Ø3.6 Ø3 3.2 Ø2.5 MS-56-0LP-H Times Applicable cable: DFS-UL7 (Junkosha Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment. Simplified lock, right angle, long Ø Ø3.6 Ø3 0 Ø2.5 MS-56-0LP-H Times Applicable cable: DFS-UL7 (Junkosha Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment..3 Dia 3 Simplified lock, right angle, for antenna MS-56C-LP Times Applicable cable: RF-MF506 (Nissei Electric Co., Ltd.) Please contact Hirose Sales Representative for cable length and cable end treatment.

9 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz SMA Conversion Adapters Simplified lock - MS-56-HRMJ-H Times Press down, with flange, short Ø2.6 4 Ø3.4 Ø5.2 /4-36UNS-2A Ø20 MS-56-HRMJ ,000 Times Press down, with flange, long Ø2.6 4 Ø5 Ø3.4 3 /4-36UNS-2A Ø20 MS-56-HRMJ ,000 Times Press down, with flange, right angle Ø3.4 Ø Ø5.4 /4-36UNS-2A.6 Ø2 2 Ø20 %#* (#+ ( &#+ - #* &$)"(+JCH"'6 '&#.-#&*#. MS-56LP-HRMJ ,000 Times

10 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Floating (Self-Pressing) Ø Ø3. 20 Ø0.3 Ø Ø /4-36UNS-2A MS-56-HRMJ ,000 Times Floating (Self-Pressing) Ø Ø Ø5. Ø Ø /4-36UNS-2A MS-56-HRMJ ,000 Times Floating (Self-Pressing) Ø2.6 2 Ø2. Ø24 Ø Ø2 Ø MS-56-HRMJ ,000 Times

11 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Adapter for plug inspection SMA Conversion Adapter Ø2 Ø Ø MS-56R-HRMJ Times N Conversion Adapter Ø2 Ø Ø2 5/-24UNEF-2A 2 /4-36UNS-2A MS-56R-NJ Times

12 MS-56C Series Subminiature Coaxial Switch.35 mm High, DC to Hz Powered by TCPDF ( USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS 26 Westhills Court, Simi Valley, CA Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 3255 Scott Boulevard, Building 7, Suite 0 Santa Clara, CA 5054 Phone : Fax : USA: HIROSE ELECTRIC (U.S.A.), INC. CHICAO OFFICE 50 Waters Edge Lane, Suite 205 Lombard IL 604 Phone : Mail : inquiries@hirose.com USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) Laurel Office Park III 77 Laurel Park Drive Suite 253 Livonia, MI 454 Phone : Fax : THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg # 0 CC Amsterdam Z-O Phone : Fax : ERMANY: HIROSE ELECTRIC EUROPE B.V. ERMAN BRANCH Herzog-Carl-Strasse 4 D Ostfildern (Scharnhauser Park) Phone : Fax : ERMANY: HIROSE ELECTRIC EUROPE B.V. NUERNBER OFFICE Muggenhofer Str Nuernberg Phone : Fax : ERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 3055 Langenhagen, ermany Phone : Fax : FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La arenne Colombes,Place de La Belgique, 7 Boulevard National La arenne Colombes, 2250, France Phone : +33 (0) Fax : +33 () UNITED KINDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 NH Phone : Fax : CHINA: HIROSE ELECTRIC (SHANHAI) CO., LTD. 60, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China Phone : Fax : CHINA: HIROSE ELECTRIC (SHANHAI) CO.,LTD. BEIJIN BRANCH A00, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, Phone : Fax : CHINA: HIROSE ELECTRIC TECHNOLOIES (SHENZHEN) CO., LTD. Room 0-3, /F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, uangdong Province, 500 Phone : Fax : HON KON: HIROSE ELECTRIC HONKON TRADIN CO., LTD. Room 00, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : Fax : TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 03 F, No.7, Zhengzhou Rd., Taipei Phone : Fax : SINAPORE: KOREA: INDIA: HIROSE ELECTRIC SINAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINAPORE PTE. LTD. HIROSE KOREA CO., LTD. 26-0, Jeoungwhang-Dong, Shihung-City, 0 Anson Road #26-, International Plaza Office NO.5, Regus-reen Boulevard, Level5, Tower C, Sec62, Plot B-A, Block B, Noida, 2030, Uttar Pradesh, India Kyunggi-Do , Singapore Phone : Phone : ,724 Phone : Fax : Fax : Fax : INDIA: HIROSE ELECTRIC SINAPORE PTE. LTD. BANALORE LIAISON OFFICE Unit No.03, round Floor, Explorer Building International Tech Park Whitefield Road, Bangalore Karnataka, India Phone : Fax : MALAYSIA: HIROSE ELECTRIC SINAPORE PTE. LTD , Penang Cybercity (64),Lintang Mayang Pasir 3,50, Bayan Baru, Penang, Malaysia. Phone : Fax : THAILAND: HIROSE ELECTRIC SINAPORE PTE. LTD. BANKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 020 Thailand Phone : Fax : ,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of /205. Contents are subject to change without notice for the purpose of improvements.