TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
|
|
|
- Randall Flynn
- 5 years ago
- Views:
Transcription
1 TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They are offered in five different centerlines with open or closed back option. Each is available for bulkhead or PC mounting with choice of Straight or Right ngle PC terminals, Cliptite and or Turret Terminals. Our T series is manufactured from flexible thermoplastic and resists cracking and breaking. Our TD series is manufactured from Hi-Temp Phenolic and has current carrying capability up to 30 mps. FETURES: Wide range of sizes and profiles Choice of open or closed back design Choice of multiple terminations Flexible reak resistant Thermoplastic. SPECIFICTIONS: Material: Insulator: T Series: PT, rated UL94V-0 TD Series: Phenolic, glass reinforced, rated UL94V-0 Insulator Color: lack Contacts: rass, tin plated Screws: Steel, nickel plated Hardware: rass, tin plated Electrical: Operation voltage: 300V C max. Current rating: T / T / TD series: 10 mps max. TC / TD / TE / TF / TG / TH series: 15 mps max. TD series: 20 mps max TDC series: 30 mps max TDD series: 35 mps max TDG series: 6 mps max TDH series: 15 mps max TDJ series: 50 mps max Contact resistance: 20MΩ max Insulation resistance: 500 MΩ min. Dielectric withstanding voltage: 2000V C for 1 minute Mechanical: Wire Range: T / T Series: wg TC / TE Series: wg TD Series: wg TF / TG Series: wg TD / TD / TDC Series: wg TDD/TDH Series: wg TDG Series: wg TDJ Series: 16 8 wg Temperature Rating: Operating temperature: -40 C to +105 C PCKGING: nti-esd plastic bags SFETY GENCY PPROVLS: UL Recognized & CS Certified, File no. E ORDERING INFORMTION T SERIES TERMINL LOCKS T SERIES INDICTOR T = 250" Centerline arrier lock T =.250" Closed Side arrier lock TC =.325" Centerline arrier lock (Offset Tails) TD =.325" Centerline arrier lock (Centered Tails) TE =.325" Closed Side arrier lock TF =.374" Centerline arrier lock TG =.374" Closed Side arrier lock TH =.325" Centerline Stacked lock NO. OF POSITIONS 02 Thru 30 ORDERING INFORMTION TD SERIES DUL ROW LOCKS TD 02 SERIES INDICTOR TD =.374" Centerline Dual Row lock TD =.433" Centerline Dual Row lock TDC = " Centerline Dual Row lock TDD =.471" Centerline Dual Row lock TDG =.315" Centerline Dual Row lock TDH =.393" Centerline Dual Row lock TDJ =.571" Centerline Dual Row lock TERMINL TYPE 01 = Straight PC Tail 02 = Closed Side Exit PC Tail 03 = Right ngle PC Tail 04 = Cliptite Terminal 05 = Turrett Terminal 06 = Wire Wrap Terminal NO. OF POSITIONS 02 Thru 56 MOUNTING ORIENTTION = arrier End M = Mount End 333
![TERMINL LOCKS.250" [6.35] CENTERLINE LOCK T SERIES T (2) T-05-04-M.217 [5.50].590 [15.00].433 [11.](/docs-images/87/95823658/images/2-0.jpg "00] T-05-04-.250 [6.35].138 [3.50] =.250 [6.35] x No. of Poles +.545 [13.85] =.250 [6.35] x (No.")
![of Poles +.250 [6.35]).118 [3.00] T (2) T-05-01-M.217 [5.50].590 [15.00].250 [6.35] =.250 [6.35] x No.](/docs-images/87/95823658/images/2-1.jpg "of Poles +.545 [13.85] =.250 [6.35] x (No. of Poles +.250 [6.35]).039 [1.00].118 [3.")
2 TERMINL LOCKS.250" [6.35] CENTERLINE LOCK T SERIES T (2) T M.217 [5.50].590 [15.00].433 [11.00] T [6.35].138 [3.50] =.250 [6.35] x No. of Poles [13.85] =.250 [6.35] x (No. of Poles [6.35]).118 [3.00] T (2) T M.217 [5.50].590 [15.00].250 [6.35] =.250 [6.35] x No. of Poles [13.85] =.250 [6.35] x (No. of Poles [6.35]).039 [1.00].118 [3.00] T
3 TERMINL LOCKS.250" [6.35] CLOSED CK LOCK T SERIES T T T M.504 [12.80].157 [4.00].250 [6.35].047 [1.20].157 [4.00] =.250 [6.35] x No. of Poles [14.15] =.250 [6.35] x (No. of Poles [6.35]) T.250 [6.35] T T M.031 [0.80] sq.504 [12.80] =.250 [6.35] x No. of Poles [14.15] =.250 [6.35] x (No. of Poles [6.35]).252 [6.40] 335
![TERMINL LOCKS.325" [8.25] CENTERLINE LOCK T SERIES TC TC-03-01-M.520 [13.20].](/docs-images/87/95823658/images/4-1.jpg "512 [13.00] TC-03-01-.39 [10.0] = x No. of Poles +.728 [18.5] = x (No.")
![of Poles + ) TC TC-03-06-M.520 [13.20].512 [13.00].550 [.13.97] TC-03-06-.](/docs-images/87/95823658/images/4-2.jpg "394 [10.00] = x No. of Poles +.728 [18.5] = x (No. of Poles + ) 336 www.")
4 TERMINL LOCKS.325" [8.25] CENTERLINE LOCK T SERIES TC TC M.520 [13.20].512 [13.00] TC [10.0] = x No. of Poles [18.5] = x (No. of Poles + ) TC TC M.520 [13.20].512 [13.00].550 [.13.97] TC [10.00] = x No. of Poles [18.5] = x (No. of Poles + ) 336
![433 [11.00] TD-03-04-.138 [3.50] = x No. of Poles +.728 [18.](/docs-images/87/95823658/images/5-2.jpg "5] = x (No. of Poles + TD TD-03-01-M.591 [15.")
![00] TD-03-01- = x No. of Poles +.728 [18.5] = x (No.](/docs-images/87/95823658/images/5-3.jpg "of Poles + TD TD-03-03-M.591 [15.00] TD-03-03-.394 [10.")
5 TERMINL LOCKS.325" [8.25] CENTERLINE LOCK T SERIES TD TD M.590 [15.00].433 [11.00] TD [3.50] = x No. of Poles [18.5] = x (No. of Poles + TD TD M.591 [15.00] TD = x No. of Poles [18.5] = x (No. of Poles + TD TD M.591 [15.00] TD [10.00] = x No. of Poles [18.5] = x (No. of Poles
![728 [18.5] = x (No. of Poles + TE TE-05-02-.598 [15.20].496 [12.](/docs-images/87/95823658/images/6-1.jpg "60] TE-03-02-M.236 [6.00] = x No. of Poles +.728 [18.5] = x (No.")
![of Poles + TE.598 [15.20] TE-05-01-.496 [12.60].177 [4.50] TE-03-01-M.](/docs-images/87/95823658/images/6-2.jpg "157 [4.00] = x No. of Poles +.728 [18.5] = x (No. of Poles + 338 www.")
6 TERMINL LOCKS CLOSED CK LOCK T SERIES TE SERIES TE TE [15.20].496 [12.60].157 [4.00].394 [10.00] TE M = x No. of Poles [18.5] = x (No. of Poles + TE TE [15.20].496 [12.60] TE M.236 [6.00] = x No. of Poles [18.5] = x (No. of Poles + TE.598 [15.20] TE [12.60].177 [4.50] TE M.157 [4.00] = x No. of Poles [18.5] = x (No. of Poles
![TERMINL LOCKS.374" [9.50] CENTERLINE LOCK T SERIES TF ø.126 [3.20].650 [16.50] TF-05-03-M.740 [18.80].197 [5.](/docs-images/87/95823658/images/7-0.jpg "00] TF-05-03-.118 [3.00] = x No. of Poles +.803 [20.40] = x (No. of Poles + TF ø.126 [3.20].650 [16.50] TF-05-05-M.")
![740 [18.80].394 [10.00] TF-05-05-.118 [3.00] = x No. of Poles +.803 [20.40] = x (No. of Poles + TF ø.126 [3.20].](/docs-images/87/95823658/images/7-2.jpg "650 [16.50] TF-05-01-M.740 [18.80].177 [4.50] TF-05-01- = x No. of Poles +.803 [20.40] = x (No. of Poles + www.")
7 TERMINL LOCKS.374" [9.50] CENTERLINE LOCK T SERIES TF ø.126 [3.20].650 [16.50] TF M.740 [18.80].197 [5.00] TF [3.00] = x No. of Poles [20.40] = x (No. of Poles + TF ø.126 [3.20].650 [16.50] TF M.740 [18.80].394 [10.00] TF [3.00] = x No. of Poles [20.40] = x (No. of Poles + TF ø.126 [3.20].650 [16.50] TF M.740 [18.80].177 [4.50] TF = x No. of Poles [20.40] = x (No. of Poles
8 TERMINL LOCKS.374" [9.50] CLOSED CK LOCK T SERIES TG.236 [6.00] TG CLOSED SIDE ENT RY PC TERMINL.693 [17.60].567 [14.70].032 [.80] TG M = x No. of Poles [20.50] = x (No. of Poles + TG ø.118 [3.00] TG [17.60].567 [14.40] TG M.047 [1.20].157 [4.00] = x No. of Poles [20.50] = x (No. of Poles [9.50] TG TG [17.60].032 [.81].59 [15.0] TG M = x No. of Poles [20.50] = x (No. of Poles
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
TERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
HEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
Terminal Blocks. TBF Turrett Terminal Series. Specifications: Material: Page <1> 17/01/12 V1.1
s TBF Turrett Terminal Series Insulator : PBT, rated UL94V-0 : 300 V ac : 15 A : 500 MΩ : 22-14 AWG : -65 C to +125 C Dimensions : (Millimetres) Unless Otherwise Specified All Dimensions are (mm) A = 0.374
TL series Tiny washable toggle switches
Distinctive features and specifications Sealed Single piece case O-ring seal between actuator and bushing Epoxy sealed terminals Wide variety of contact materials Same PCB layout as TP, TR and TG tiny
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
TOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
WIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
MODEL: 27HU-B 27-UNIT. [3] LED INDICATOR 0: Without 1: With (SIL not available)
![MODEL: 27HU-B 27-UNIT. [3] LED INDICATOR 0: Without 1: With (SIL not available)](/thumbs/80/82225625.jpg "MODEL: 27HU-B 27-UNIT. [3] LED INDICATOR 0: Without 1: With (SIL not available)")
MODEL: 7HU- Head-mounted Two-wire Signal Conditioners 7-UNIT -WIRE UNIVERSL TEMPERTURE TRNSMITTER (HRT communication, outdoor enclosure, explosion-proof) Functions & Features Universal input: DC mv, T/C,
Sealed Toggle Switches. Contact Material Q silver plated R gold plated G gold over silver K tin plated
E E TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q terminal) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000
EuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System
EuroMag PCB Mount Terminal Blocks EM.0 Centers; Modular Rating: A, 00V Center Spacing: 0. (.0mm) Wire Range: #1- AWG Housing Material: Black Polyamide Type /, V0 Screw Size: M.0 Chromate Steel Operating
2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
MODEL: 27HU 27-UNIT MODEL: 27HU [1][2]
![MODEL: 27HU 27-UNIT MODEL: 27HU [1][2]](/thumbs/81/83673121.jpg "MODEL: 27HU 27-UNIT MODEL: 27HU [1][2]")
Head-mounted Two-wire Signal Conditioners 7-UNIT -WIRE UNIVERSL TEMPERTURE TRNSMITTER (HRT communication) Functions & Features Universal input: DC mv, T/C, RTD and resistance High accuracy HRT communication
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Sectional Terminal Blocks
ectional Terminal locks General Information: ectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
COMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
TSB Suffix Suffix. 503Si 2 Suffix
Catalog Numbering Code Europa locks TS 230 02 Suffix Suffix Series Europa locks Options (blank) = Standard (105 ) HT = High Temperature (150 ) US = 600V Pitch 230 = 8mm 500 = 10mm 500SK = 10mm, Elongated
FIBER-OPTIC COMPONENTS TERMINAL BLOCKS BARRIER
See Our Expanded Semiconductor Selection Online CONNECTORS & ACCESSORIES FIBER-OPTIC COMPONENTS BARRIER MINI-COM FIBER OPTIC ADAPTER MODULES AMP BARRIER STRIPS CMDEISCEI CMMJEI CMFCEI Robust Designs Meet
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
SMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.
SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials
7M Series Snap-Acting Pushbutton Switches
Series Snap-cting SPECIFICTIS CTCT RTING: Dependent upon contact material see page 08. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
Small-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
MAGNUM. Terminal Blocks / Power Distribution Blocks / Interconnect Devices
MAGNUM Terminal Blocks / Power Distribution Blocks / Interconnect Devices MAGNUM, formerly known as Bussmann Circuit Components, is a product family of Cooper Bussmann. MAGNUM manufactures the most complete
General Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
Pushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
Memory card connectors
Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/90/101430850.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
RTBH Series 1-2 Pole Coded Rotary Switches Features/Benefits
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts
P Y L O N P O G O C O N T A C T S Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts The Pylon Advantage The Pylon Pogo Contact advantage comes
CMS SLIDE SWITCHES (SMD) COPAL ELECTRONICS CMS T B FEATURES PART NUMBER DESIGNATION. RoHS compliant INTERNAL STRUCTURE.
OPAL ELETRONIS SLIDE SWITHES (SMD) MS RoHS compliant INTERNAL STRUTURE 7 FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact mechanism Load life of, cycles ompatible with automatic
D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series
D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for
Customer P/N: UDE P/N: Description: RUP-ZZ-0073 RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T. LED:L-Yellow; R-Green/Orange
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T Contact Area : 30μ'' Min. Gold LED:L-Yellow; R-Green/Orange Approved Spec No. Update Date Revision RUP17083-00
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5
M Series Minature SPECIFICTIS CTCT RTING: Dependent upon contact material See page. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR
INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/85/92583829.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
Gecko Connectors Introduction
Gecko onnectors Introduction Gecko is a mm pitch High-Reliability connector range from Harwin. Improving on the popular 2mm pitch Datamate series, and harnessing the modern technology of micro-machining,
ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
MODEL: M3LU. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step Cal calibration
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
General Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
Quick Reference Guide Gemini Series Switches
Quick Reference Guide The TE Connectivity extensive Gemini A and Gemini AE Series offer one and two poles with multi circuit configurations, including: momentary function, locking toggle to avoid unwanted
Miniature Toggle Switches
T0-T SPECIFICTIS CTCT RTING: @0 VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min. DIELECTRIC STRENGTH:,00
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Ω BLOCK. Ω BLOCK - Distribution Blocks
Ω LOK Ω LOK - Distribution locks The TEKNOMEG Ω LOK range is quite complete and includes terminal board distribution units, both single block and compact. This allows making distribution units from up
Components for safety applications
Metal, turret head, types CS-A, CS-C and CS-E Double insulated, turret head, types CS-PA, CS-TA and CS-TE Presentation Metal, types CS-A, CS-C, CS-E Switches with or without locking of the actuator Pages
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
Poke-Home Thru-Wire: WTW
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
MICRO-CONTROLLER X (48mm 48mm)
PX series Digital temperature Controller DT SHEET Socket Type With front dimensions of 8 8mm, this socket type temperature controller enables OnOff control, PID control or 8step ramp/soak function, using
Powerpole Connectors - PP120: up to 240 Amps
Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8
RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES
RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
MODEL: M3LU2. OUTPUT Field-selectable Current 0 20 ma DC Voltage V DC V DC
MODEL: MLU Space-saving Signal Conditioners M-UNIT Series UNIVERSL TRNSMITTER (field- and PC-configurable) Functions & Features Universal input: mv, V, m, T/C,, resistance and potentiometer Easy One-Step
Medium-base Lampholders
Medium-base Lampholders For HID Lamps Medium-base lampholders Material: porcelain, white Nominal rating: 4A/250V/5kV pulse rated Terminals: bushings with set screws 18 14AWG solid Screw shell insert: zinc-plated
RH2-ZZ-0003 USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area : 30μ'' Min. Gold LED:Without LED Approved Spec No. Update Date Revision RH217011-00 2017/6/7 A Checked
Innovative Engineering Solutions. Selection Guide TERMINAL BLOCKS. A division of Powers Holdings, Inc.
Innovative Engineering Solutions Selection Guide TERMINAL BLOCKS A division of Powers Holdings, Inc. Selection Guide Barrier Terminal Blocks Terminal Blocks Terminal blocks are typically used in commercial
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
AirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
2 POLE 5A/TV-3 RATED COMPACT TYPE
POWER RELY POLE /TV-3 RTED COMPCT TYPE FTR-F Series RoHS compliant FETURES Small high density type relay mm save % compared to VB UL/CS/VDE/SEMKO/CQC approved Insulation distance: minimum mm between coil
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
[3] MOUNTING DIRECTION
![[3] MOUNTING DIRECTION](/thumbs/82/85707453.jpg "[3] MOUNTING DIRECTION")
Bargraph Indicators N Series BARGRAPH INDICATOR Functions & Features Displays two process variables in dual graphic bargraphs of LED segments Single and dual bargraphs IP front cover plate is easily replaced
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
MODEL: R3-RS8A. Remote I/O R3 Series. RTD INPUT MODULE (high accuracy, 8 points, isolated) MODEL: R3-RS8A[1][2]
![MODEL: R3-RS8A. Remote I/O R3 Series. RTD INPUT MODULE (high accuracy, 8 points, isolated) MODEL: R3-RS8A[1][2]](/thumbs/78/76949830.jpg "MODEL: R3-RS8A. Remote I/O R3 Series. RTD INPUT MODULE (high accuracy, 8 points, isolated) MODEL: R3-RS8A[1][2]")
MODEL: R-RS Remote I/O R Series INPUT MODULE (high accuracy, points, isolated). (.0) 0 (.) 0 (.) mm (inch) MODEL: R-RS[][] ORDERING INFORMTI Code number: R-RS[][] Specify a code from below for each []
Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount
Eurostyle ESE PCB Terminal Blocks Pluggable and Fixed Mount FEATURES AND SPECIFICATIONS Fulfill your terminal block design requirements with a new and extensive range of ESE PCB terminal blocks from Molex.
CONTACTING - MODULES TEST SOLUTIONS ENGINEERED TO CONNECT
ENGINEERED TO CONNECT CONTACTING - MODULES TEST SOLUTIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 CONTACTING - MODULES QSEVEN
YL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
Miniature Toggle Switches SPECIFICTIS CTCT RTING: @ VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min.
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment
Material: High Temperature Thermoplastic (LCP) Flammability: UL 94V-0. Material: Copper Alloy Plating: See Ordering information
M MetPak HM Header Modular/scalable format IEC 61076-4-101 Press-fit or solder tail version 101 mated lines per linear inch Ships with protective cap, which also serves as an insertion tool End-to-end
Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms
Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Size
Wire-to-Wire connectors have been used in the industrial market for years with traditional 2-Piece (plug and socket) connector systems which require crimp and poke wire terminations to connect electrical
D-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG