RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES
|
|
|
- Ashlynn Thornton
- 5 years ago
- Views:
Transcription
1 RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation transformers, termination circuitry and two LED s per port. Reduces the required board space, component count, and manufacturing cost per port Eliminates the need for a separate Magnetics package between the RJ-45 and Transceiver Simplifies board layout Available in 1, 4, and 8 port configuration Complies with IEEE MECHANICAL RJMG-63xx-xx-01 MATERIAL SPECIFICATIONS Plastic housing: thermoplastic polyester flammability rating UL 94V-0 Contacts: Phosphor bronze Plating: 50 microinches [1.27 microns] min. nickel overall 50 microinches [1.27 microns] min. gold on mating surfaces 100 microinches [2.54 microns] min. tin/lead on contact tails Shield: Copper alloy tin-lead plated Telephone: (416) Facsimile: (416) sales@amphenolcanada.com
2 ELECTRICAL PERFORMANCE Insertion 0 Return differential common OCL H 100 KHz 8mA DC Bias Crosstalk db MAX Pair to pair LED to Tx/Rx Hipot Vrms min 10/100 Base T Base T SCHEMATIC PART NUMBERING SYSTEM RJMG LED 1 (Right Side): 0 - LED hole blocked 1 - Green 2 - Yellow 3 - Red 4 - Bi-color Green/Yellow 5 - Bi-color Red/Green 6 - Bi-color Green/Orange 6 - Bi-color Red/Yellow LED 2 (Left Side): See LED 1 options Amphenol Data / Telecom Products 20 Melford Drive, Scarborough, Ontario Canada M1B 2X6 Telephone: (416) Facsimile: (416) sales@amphenolcanada.com Website: Number of Ports 01-1 Port 04-4 Port 08-8 Port Turns Ratio (Transmit) 1-1: :1 3-2:1 4-2:1 5-1: 2 (1Ø Base T only) 6-1:2 (1Ø Base T only) Termination Option: 3-4 x 75 ohm resistors, 68 pf cap 4-2 x 0 ohm resistors, 68 pf cap 5-2 x 75 ohm resistors, 68 pf cap 6-3 x 75 ohm resistors, 1000 pf cap 7-4 x 75 ohm resistors, 1000 pf cap (with transmit shunt choke) 8-4 x 75 ohm resistors, 1000 pf cap (Other terminations are available upon request.) Amphenol Canada Corp. Specifications subject to change without notice. Printed in Canada 02/00 Designed by K Jasper Marketing Communications Inc. CATALOGUE # ADT 00015/00-01
3 RJmag OVER STACKED USB RJ-45 WITH INTEGRATED 10/100 BASE TX LANMAGNETICS OVER A STACKED TYPE A USB FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation transformers, termination circuitry and two LED s per port. The RJmag over USB was designed to save board and panel space on PC motherboard applications. Reduces the required board space, component count, and manufacturing cost per port Eliminates the need for a separate Magnetics package between the RJ-45 and Transceiver Simplifies board layout Complies with IEEE MECHANICAL RJMG-73xx-xx-01 ETHERNET PIN OUT MATERIAL SPECIFICATIONS Plastic housing: thermoplastic polyester flammability rating UL 94V-0 Contacts: Phosphor bronze Plating: 50 microinches [1.27 microns] min. nickel overall 50 microinches [1.27 microns] min. gold on RJ mating surfaces 100 microinches [2.54 microns] min. tin/lead on contact tails Shield: Copper alloy tin-lead plated Telephone: (416) Facsimile: (416) sales@amphenolcanada.com
4 ELECTRICAL PERFORMANCE Insertion 0 Return differential common OCL µh 100 KHz 8mA DC Bias Crosstalk db MAX Pair to pair LED to Tx/Rx Hipot Vrms min 10/100 Base T Base T SCHEMATIC SCHEMATIC (RJMG-73xx-3x-01) SCHEMATIC (RJMG-73xx-8x-01) SCHEMATIC (RJMG-73xx-4x-01, RJMG-73xx-5x-01) SCHEMATIC (RJMG-73xx-6x-01) SCHEMATIC (RJMG-73xx-7x-01) PART NUMBERING SYSTEM RJMG X X - X X LED 1 (Right Side): 0 - LED hole blocked 1 - Green 2 - Yellow 3 - Red 4 - Green/Yellow 5 - Red/Green 6 - Green/Orange 7 - Red/Yellow LED 2 (Left Side): See LED 1 options Number of Ports 01-1 Port Turns Ratio (Transmit) 1-1: :1 3-2:1 4-2:1 5-1: 2 (1Ø Base T only) 6-1:2 (1Ø Base T only) Termination Option: 3-4 x 75 ohm resistors, 68 pf cap 4-2 x 0 ohm resistors, 68 pf cap 5-2 x 75 ohm resistors, 68 pf cap 6-3 x 75 ohm resistors, 68 pf cap 7-4 x 75 ohm resistors, 1000 pf cap (transmit shunt choke) 8-4 x 75 ohm resistors, 1000 pf cap 20 Melford Drive, Scarborough, Ontario Canada M1B 2X6 Telephone: (416) Facsimile: (416) sales@amphenolcanada.com Website: Amphenol Canada Corp. Specifications subject to change without notice. Printed in Canada 02/00 Designed by K Jasper Marketing Communications Inc. CATALOGUE # ADT 00016/00-01
5 RJmag-Gigabit RJ-45 WITH INTEGRATED 10/100/1000 BASE TX LAN MAGNETICS FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation transformers, termination circuitry and two LED s per port. Reduces the required board space, component count, and manufacturing cost per port Eliminates the need for a separate Magnetics package, terminations and LEDs between the RJ-45 and Transceiver Simplifies board layout Complies with IEEE Compatible with a variety of Gigabit Ethernet transceiver ICs and 10/100 Base TX transceiver ICs Storage temperature Cto+85 0 C GIGABIT MECHANICAL RJMG-B3xx-x1-01 KEEPOUT AREA SHIELDED Recommended Panel Cutout RECOMMENDED P.C.B. LAYOUT WITH LEDs Telephone: (416) Facsimile: (416) sales@amphenolcanada.com
6 ELECTRICAL Part Number 10/100 /1000 Base T Insertion db max PERFORMANCE to Return db max 40 to log (f/80 ) Differential Mode Rejection 100 KHz to 100 Common Mode Rejection 0.3 to 100 Crosstalk TX/RX Crosstalk TX/RX to LED s db max Hipot Vrms min log (f/100) MATERIAL SPECIFICATIONS SCHEMATICS Plastic housing: Thermoplastic Polyester Colour: Black Flammability Rating: UL94V-0 Contacts (RJMag): Phosphor bronze Plating: 50 Microinches [1.27 Microns] Gold over 50 Microinches [1.27 Microns] Min. nickel on mating surfaces 100 Microinches [2.54] tin/lead alloy on contact tails Shield: Copper Alloy Plating: tin-lead alloy PART NUMBERING SYSTEM RJMG - B Shield: 3- Shielded LED 1 (Right Side): 1 - Green 2 - Yellow 3 - Red 4 - Bi-color Green/Yellow 5 - Bi-color Red/Green 6 - Bi-color Green/Orange 7 - Bi-color Red/Yellow Turns Ratio (Transmit): 1-1:1 Termination Option: 3-4 x 75 ohm resistors, 68 pf cap (2Kv) 7-4 x 75 ohm resistors, 1000 pf cap (2Kv) (transmission shunt choke) 8-4 x 75 ohm resistors, 1000 pf cap (2Kv) Number of Ports: 01-1 Port LED 2 (Left Side): See LED 1 options Amphenol Data / Telecom Products 20 Melford Drive, Scarborough, Ontario Canada M1B 2X6 Telephone: (416) Facsimile: (416) sales@amphenolcanada.com Website: Amphenol Canada Corp. Specifications subject to change without notice. Printed in Canada Designed by Presstige Graphics CATALOGUE #ADT 0018R0/01-06
PulseJack 1x1 Tab-UP RJ45
Description: 00 Base-TX (Fast Ethernet) RJ x Tab-UP with LEDs -pin (J series) and -pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard,
PulseJack 1x1 Tab-UP RJ45
x Tab-UP RJ Description: 00 Base-TX (Fast Ethernet) RJ x Tab-UP with LEDs -pin (J series) and -pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard,
Customer P/N: UDE P/N: Description: RUP-ZZ-0073 RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T. LED:L-Yellow; R-Green/Orange
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T Contact Area : 30μ'' Min. Gold LED:L-Yellow; R-Green/Orange Approved Spec No. Update Date Revision RUP17083-00
RH2-ZZ-0002 USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow Approved Spec No. Update Date Revision RH217007-00 2017/4/12 A
RH2-ZZ-0003 USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area : 30μ'' Min. Gold LED:Without LED Approved Spec No. Update Date Revision RH217011-00 2017/6/7 A Checked
MBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors
BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board
PulseJack Surface Mount 1x1
Description: 00 Base-TX (Fast Ethernet) surface mount RJ single port (x) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network
POE 60W & Light Pipe
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 30μ'' Min. Gold LED: L-Green/Yellow; R-Green/Yellow POE 60W & Light Pipe 100% RoHS material,without
Customer P/N: UDE P/N: GDC-1U2AVN13. Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green Spec No. GDC0013-00 Update Date 2015/7/7 Revision C Approved Checked
Customer P/N: UDE P/N: Description: GDA-MA-0001 RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow 100% RoHS material,without exemption PoE 60W Approved Spec No.
GD1-MA-0005 RJ45 1X1 Tab Down Through Hole 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 50μ'' Min. Gold LED:L-Yellow/Green; R-Green 100% RoHS material,without exemption Approved Spec No. Update
Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe Spec No. Update Date Revision RTK16036-00
Corcom Product Guide. Introduction
Introduction Corcom brand SignalSentry filtered modular jack series product combines different levels of filtering with and modular jacks to solve signal line noise problems and crosstalk. Corcom brand
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
SMD Pulse Transformer for Ethernet Applications. The New Reference LAN Pulse Transformer
Fascinating, Fast, Accurate Communication SMD Pulse Transformer for Ethernet Applications ALT Series The New Reference Pulse Transformer In recent years, connectors have become standard equipment not only
compu-shield sfp series
compu-shield sfp series 20-01 - 2016 INELCO the home of unparalleled quality and service in INterconnection and ELectronic COmponents is a European driven company, manufactoring European ideas, solutions
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
GM2-MA-0004 RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area : 30μ'' Min. Gold LED:Without LED 100% RoHS material,without exemption Approved Spec No. Update Date Revision
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
MIL-STD 1553 Interface Transformers - DBIT x 3 S
Electrical Data ( C ) - : - - : - MIL-STD Interface Transformers - DBIT x S () (-) () (-) (mh) min at khz-v DBIT S : : 0.0. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S. :. :. Lp (-) DBIT S
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
RJ45 Jacks with integrated magnetics
Ordering code: Date: October 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14
Amphenol Amphenol Taiwan Corporation Sheet 1 of 14 Title: Part Number: Description: USB3.0 Connector Product Specification GSB34 / GSB35 series Micro Family, Receptacle, SMT, PCB mount Revisions Control
GSG-MA-0001 RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Orange/Green 100% RoHS material,without exemption Approved Spec No. Update
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
ExaMAX 56Gb/s High Speed Orthogonal Connector System
ExaMAX 56Gb/s High Speed Orthogonal Connector System ExaMAX high speed orthogonal connector system is designed to enable superior 56Gb/s electrical performance for increasing bandwidth requirements and
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color All Sizes 9 = UL White (Standard) 8 = UL Black (Special Order)
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.
SPECIFICATION AND PERFORMANCE CHARACTERISTICS SERIAL ATA CABLE ASSEMBLIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF SERIAL ATA CABLE ASSEMBLIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS: 1.0 SCOPE.. 3 2.0 APPLICABLE DOCUMENTS 3
1/4 PHONE JACK CONNECTORS
1/4 PHONE PLUGS 1/4 PHONE JACK CONNECTORS Amphenol phone connectors are available in 1/4 (6.35mm) and 3.5mm jack sockets or dual jack socket versions featuring combinations of both sizes. The standard
MILITARY/AEROSPACE PRODUCTS
Pulse is one of the leading manufacturers of magnetic interface transformers, data bus couplers, delay lines, ethernet transformers, and custom electronic components for Military/Aerospace applications.
Ethernet & High Speed Networks. Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646
Ethernet & High Speed Networks Quadrax Contact up to Cat6 MIL-DTL-38999/ARINC 600/EN2997/EN3646 Quadrax Contact Presentation Today s technology for Aeronautic and Military equipment is more and more complex,
SMD Pulse Transformer for Ethernet Applications. The New Reference LAN Pulse Transformer
Fascinating, Fast, Accurate Communication SMD Pulse Transformer for Ethernet Applications ALT4532 Series The New Reference Pulse Transformer In recent years, connectors have become standard equipment not
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Maverick Series Gigabit Ethernet, External TFOCA II *, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm
Maverick Series Gigabit Ethernet, External TFOCA II *, 000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Single Port, Flange Receptacles FEATURES Compliant with IEEE-802.:2005 Gigabit Ethernet Optical
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
M22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
M20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
Data sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
Data sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
PRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
CAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
100W High Power Silicon PIN Diode SPDT Switches By Rick Puente, Skyworks Solutions, Inc.
October 2013 100W High Power Silicon PIN Diode SPDT Switches By Rick Puente, Skyworks Solutions, Inc. Radio transceiver designers have searched for a low cost solution to replace expensive mechanical switches
CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW. QFP/TQFP - 64 Pins (10x10) 0.5mm pitch. Detail C. Detail B
QFP/TQFP - 64 Pins (10x10) 0.5mm pitch Withstanding Voltage: 100V eff Solvent Durability: Freon Part Number (Details) IC149-064 - *69 - B5 B5 = Au over Ni Not available Detail C 10mm x 10mm N1 Detail B
HARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
Standard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
Modular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
Modular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
COMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
Wideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
PRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
TD-DEV V Technical Specification
High-Efficiency MODULE Carrier Board TD-DEV-500-12V Technical Specification POWER SUPPLY TECHNOLOGY FEATURES Low profile 1U, 500W power supply High efficiency power supply Fully integrated with CPU control
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order Ø Ø Ø
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.
Data sheet. M12 Jack X-coded IP67, field assembly. Illustrations P/N MMF881A315 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification 8-pole M12 jack for field assembly Cat.6A per IEC/PAS 61076-2-109 suitable for 10 GBit
PRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
50 W High Power Silicon PIN Diode SPDT Switch By Rick Puente, Skyworks Solutions, Inc.
February 2012 50 W High Power Silicon PIN Diode SPDT Switch By Rick Puente, Skyworks Solutions, Inc. Radio transceiver designers have searched for a low cost solution to replace expensive mechanical switches
10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
Lightning Series MIL-DTL Optical Transmitters, ARINC 818 & sfpdp Applications, Multimode, 850nM VCSELs
Lightning Series MIL-DTL-38999 Optical Transmitters, ARINC 818 & sfpdp Applications, Multimode, 850nM VCSELs Dual Port Transmitter, Receptacle FEATURES Suitable for ARINC 818, sfpdp and other applications
Features. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications The HMC244AG16 is ideal for: Telecom Infrastructure Military Radios, Radar & ECM Space Applications Test Instrumentation Functional Diagram Features Low Insertion Loss:.9 Non-Reflective
By using this Adapter a connection between Socket and Emulator or programming device can be easily achieved.
Series Introduction QFP-Production Use Socket and Emulation-Adapter YAMAICHI's IC149-Series is available in many different formats, from 44 pins to 240 pins. It is designed to fit most of the common semiconductors
Q6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC688LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm Low Conversion Loss:
Features. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v03.15 Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Features Isolation: 55 @ 2 GHz 43 @ 6 GHz Insertion Loss: 1.6
HMC241AQS16 / 241AQS16E
v00.1213 Typical Applications Features The HMC241AQS16 & HMC241AQS16E are ideal for: Base Stations & Portable Wireless CATV / DBS Wireless Local Loop Test Equipment Functional Diagram RoHS Compliant Product
3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
TISP4G024L1W G.Fast VDSL Protector
*RoHS COMPLIANT U80L Features n Low capacitance n Low distortion n Surge protection n RoHS compliant* Applications n G.Fast equipment n xdsl modems and line cards TISP4G024LW G.Fast VDSL Protector General
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM Dual Port, Jam Nut FEATURES Compliant with IEEE-802.3:2005 Fast Ethernet 10/100Base-TX and 100Base-FX Optical
ELCO Series 8005/8015 A KYOCERA GROUP COMPANY
Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is
Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC689LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32 dbm Low Conversion Loss:
Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches
Data sheet C6 A RJ45 field plug pro 360
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 A class E A RJ45 plug to be assembled in the field fully shielded and multi-port capable
Proteus Series D38999 Optical Media Interface Adapter / Dongle, GbE,1x/2xFC or sfpdp, Multimode, 850nM
Proteus Series D38999 Optical Media Interface Adapter / Dongle, GbE,1x/2xFC or sfpdp, Multimode, 850nM Dual Port, Right Angle Dongle FEATURES Compliant with ANSI Fibre Channel FC-PI / PI-2 and IEEE-802.3:2005
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
Pin Contacts Military Part Number. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.
EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp Glenair Part Glenair Part 22 22-28 AWG M39029/107-620 850-007-22-620 M39029/106-614 850-006-22-614 20 20-24
Features. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
v4.1 Typical Applications The HMC685LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm 8 db Conversion
3mm LED CBI Circuit Board Indicator.200 High LED Centerline 551-xx07
3mm LED CBI Circuit Board Indicator.200 High LED Centerline 551-xx07 7.11 [.280] 5.08 [.200] 1.09 [.043] 4.32 [.170].508 2.89 [.114] 3.68 [.145] CATHODE Red/Yel Cathode for Bi-color 6.35 [.250] 4.4 [.175]
Datamate Connectors Female Vertical PC Tail
Female Vertical PC Polarised mouldings. For ritish Standard versions see pages 14 to 15. Dummy contacts for additional polarisation use order code M80-023. Mates with male connectors on pages 21 to 25.
AVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
SPB-7920WG / SPB-7920BWG / SPB-7920AWG (SC BIDI SFP)
** / SPB-7920BWG / SPB-7920AWG (SC BIDI SFP) (RoHS Compliant) SPB-7920LWG / SPB-7920BLWG / SPB-7920ALWG (LC BIDI SFP) 1490 nm TX / 1310 nm RX, 3.3V / 1250 Mbps Digital Diagnostic Single-Fiber SFP Transceiver
NBASE-T Copper Transceiver Small Form Factor Pluggable (SFP+), 3.3V 100M/1G/2.5G/5G/10Gbps Ethernet. Features
Features 10Gbps Links up to 35 m using Cat 6a/7 Cable 100M/1G/2.5G/5Gbps Links up to 100 m using Cat5e Cable Low Power Consumption 2.2W Max, 35m @ 10Gbps, 75 C 1.88W Max, 100m @ 2.5G and 5Gbps, 75 C 1.88W
SAW Components Data Sheet B3750
Features Ceramic package QCC8C RF low-loss filter for remote control receivers Package for Surface Mounted Technology (SMT) Balanced and unbalanced operation possible Passivation layer: Protec Terminals
Data Sheet. HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd. Description.
HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd Data Sheet Description The HFBR-1119TZ/-2119TZ series of data links are highperformance, cost-efficient,
Introduction. 75 /120 OHM IDC Balun. 75 /120 Ohm IDC Mini Balun. 75 /120 Ohm Wire Wrap Balun. 75 /120 Ohm BNC to RJ45 Balun. 75 /120 Ohm Balun Panel
BalunSolutions Content Introduction 1-2 75 /120 OHM IDC Balun 3 75 /120 Ohm IDC Mini Balun 4 75 /120 Ohm Wire Wrap Balun 5 75 /120 Ohm BNC to RJ45 Balun 6 75 /120 Ohm Balun Panel 7 75 /120 Ohm Wire Wrap
Data Sheet. HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd
HFBR-1119TZ Transmitter HFBR-2119TZ Receiver Fiber Optic Transmitter and Receiver Data Links for 266 MBd Data Sheet Description The HFBR-1119TZ/-2119TZ series of data links are high-performance, cost-efficient,