MILITARY/AEROSPACE PRODUCTS

Transcription

1 Pulse is one of the leading manufacturers of magnetic interface transformers, data bus couplers, delay lines, ethernet transformers, and custom electronic components for Military/Aerospace applications. Both catalog and custom designs include a comprehensive range of high-performance solutions and packaging for QPL and non-qpl MIL-STD-1553 interface transformers, various MIL -STD-1553 Data Bus Couplers and QPL and non-qpl active and passive delay lines. In addition, Copperhead transformers and transceivers support a variety of highspeed applications that includes Fibre Channel, Gigabit Ethernet, SONET, HDTV, IEEE1394B, SMTPE, Ethernet and AFDX buses. Pulse s Military/Aerospace products are designed to meet the most demanding requirements for military, aerospace and industrial applications. For catalog and/or custom designed products, contact Pulse s Military/Aerospace Division at or find an authorized distributor or representative on the Pulse website. HIGH SPEED DATA BUS Copperhead TM Series Transceiver Line Interface Modules Ordering Information 1 High Speed Data and Communications over 100+ Meters of Copper Withstands infrared and vapor phase soldering Military temperature range -55 C to +125 C Low transmit/receive jitter Low power dissipation; 450 mw typical ECL logic interface Surface mount pick-and-place compatible Applications: Fibre Channel, Gigabit Ethernet, SONET, HDTV, IEEE 1394B, SMTPE 1. See data sheet Copperhead Series Fibre Channel Transceiver Line Interface Module (fibre.pdf) on the data sheet menu at Copperhead TM Series 1, 2 Part Turns Ratio Primary Inductance Rise Time DC Resistance Hipot Insertion Loss Application Nominal Number (±5%) (µh MIN) (ps 20-80%) (W MAX) (Vrms MIN) (db MAX) Bit Rate (Mbaud) T-330SCT 1CT:1CT 1.0 Vrms, 100 khz) ( MHz) (quarter speed) T-1062SCT 1CT:1CT 1.0 Vrms, 100 khz) ( MHz) (full speed) T-1250SCT 1CT:1CT T-1485SCT 1CT:1CT (SMPTE) T-3200SCT 1: Web: home page, click on DATA SHEETS. Then select Military Aerospace, CopperHead High Speed Dual Transformers (M105. pdf). 2. Dual Transformers designed specifically for Point-to-Point Coupling to 150 W Twinax Cable: Withstands infrared and vapor phase soldering; Military Temp Range = -55 C to +125 C; Weight = 1.0 grams; Surface Mount = pick-and-place compatible. Applications: Fibre Channel, Gigabit Ethernet, SONET, HDTV, IEEE 1394B, SMTPE. 3. Parts can be ordered RoHS. Application Notes: These isolation transformers protect the station from static charges that may develop on the cable and prevent ground loop currents from being transferred between stations. They have also been designed to provide common mode rejection within the transmission band, reducing EMI. SM = Surface Mount G003.AA (06/13) 87

2 IEEE 1394B FIREWIRE 1.062GB TRANSCIEVER LINE Part Transmit/Receive Transmit Differential Total Power Receive Receive Primary Receive Insertion Transmit/Receive Package Data Number Data Rate (Mb/s) Signal Level - Vout Dissipation (mw) Turns Ratio Inductance - Lm (uh) Loss (db) Return Loss L/W/H (in.) Sheet MIN MAX MIN TYP MAX TYP TYP MIN (db) TM1062TXDUA : MAX -12 MIN.800 /.400 /.200 M103 TM1062TXHUA : MAX -12 MIN.510 /.300 /.140 M103 TM1062TX3DUA : MAX -12 MIN.800 /.400 /.185 M103 TM125TXHUA : MAX -12 MIN.510 /.300 /.140 M103 TM1062DUXB : MAX -12 MIN.800 /.400 /.200 M186 TM1062HUXB : MAX -12 MIN.510 /.300 /.140 M186 TM1062DU3XB : MAX -12 MIN.800 /.400 /.185 M186 High Frequency Balun Adapters Part Impedance Impedance Insertion Loss Jitter Dj Datasheet Number Unbalanced Balanced db MAX psec. MAX 1.485GBs 1.485GBs, P7 HFB075100A M146 HFB075100B M146 HFBM075100C M147 T1/E1/CEPT/ISDN-PRI SMT TRANSFORMER Part Turns Ratio OCL Pri@25 deg C Cww DCR PRi Primary Package Datasheet Number Pri: Sec: ±2% (µh MIN) (pf MAX) (W MAX) Pins L/W/H PL1374 1CT:1CT /.275 /.250 M119 MILITARY/AEROSPACE ETHERNET/AFDX 10/100 Number Part Turns Configuration 1 Package Data of Ports Number Ratio RX TX Style 2 Size L/W/H (in.) Sheet 1 100B CT:1CT T, C, S T,C 12-pin SMT.630/.470/.185 M B-1001X 1CT:1CT T, C, S T,C 12-pin SMT.630/.470/.185 M101 Single 100B CT:1CT T,C T,C 16-pin SOIC.500/.265/.235 M B-1003X 1CT:1CT T,C T,C 16-pin SOIC.500/.265/.235 M B CT:1CT T,C T,C,S 12-pin SMT.583/.470/.180 M B-1018X 1CT:1CT T,C T,C,S 12-pin SMT.583/.470/.180 M189 Dual 100B CT:1CT T, C T,C 24-pin SMT.518/.595/.241 M B-2002X 1CT:1CT T, C T,C 24-pin SMT.518/.595/.241 M B CT:1CT T,C T,C 40-pin SOIC 1.125/.480/.280 M B-4005X 1CT:1CT T,C T,C 40-pin SOIC 1.120/.480/.280 M102 Quad 100B CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B-4009X 1CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B-4011X 1CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M /100Base-TX Single-Port Transformer Modules - Military/Aerospace Grade (M101.pdf) or 10/100Base-TX Quad-Port Transformer Modules - Military/ Aerospace Grade (M102.pdf) at 2. T = Transformer, C = Choke, S = Shunt inductor, SMT = 50 mil pitch leads, SOIC = 100 mil pitch leads Single Dual Quad 1000B CT:1CT T, C, S T, C, S 24-pin SOIC.695/.635/.230 M B-5001X 1CT:1CT T, C, S T, C, S 24-pin SOIC.695/.635/.230 M B CT:1CT T, C, S T, C, S 24-pin SOIC.695/.635/.230 M B-5002X 1CT:1CT T, C, S T, C, S 24-pin SOIC.695/.635/.230 M B CT:1CT T, C, T, C, 3 50-pin SOIC 1.095/.430/.340 M B-5003X 1CT:1CT T, C, T, C, 3 50-pin SOIC 1.095/.430/.340 M B CT:1CT T, C, S T, C, S 24-pin SMT.595/.518/.241 M B-5012X 1CT:1CT T, C, S T, C, S 24-pin SMT.595/.518/.241 M Web: home page, pick data sheets 10/100/1000Base-T Single Port Transformer Modules -- Military/ space rade (M106.pdf). 2. T = Transformer, C = Choke, S = Shunt inductor, SMT = 50 mil pitch leads, SOIC = 100 mil pitch leads mm (0.39 ) pitch leads continued next page 88 G003.AA (06/13)

3 MIL-STD-1553 Non-QPL, Low Profile and Stacked 1 Part Turns Ratio Impedance Package* Data Number 2 (±3%) (W MIN) L/W/H (in.) Sheet FL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 GL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 TL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 FL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 GL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 TL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 FL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 GL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 TL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 FL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 GL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 TL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 FL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 GL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 TL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 DFL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 DGL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 DTL CT:1CT/1CT:.707CT 4, /.630/.155 MC118 2, 3 DFL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 DGL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 DTL CT:1CT/2CT:1CT 7, /.630/.155 MC118 2, 3 DFL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 DGL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 DTL CT:1CT/1.66CT:1CT 4, /.630/.155 MC118 2, 3 DFL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 DGL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 DTL CT:2.12CT/1CT:1.5CT 4, /.630/.155 MC118 2, 3 DFL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 DGL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 *Mounting: FP = Flat Pack TH = Through Hole SM = Surface Mount Part Turns Ratio Impedance Package* Data Number 2 (±3%) (W MIN) L/W/H (in.) Sheet DTL CT:2.5CT/1CT:1.79CT 4, /.630/.155 MC118 2, 3 STQ CT:1CT/1CT:.707CT 4, /.630/.340 MC118 2, 3 Q CT:3CT/1CT:2.15CT /.625 /.250 M128 STQ CT:1CT/2CT:1CT 7, /.630/.340 MC118 2, 3 STQ CT:1CT/1.66CT:1CT 4, /.630/.340 MC118 2, 3 STQ CT:2.12CT/1CT:1.5CT 4, /.630/.340 MC118 2, 3 STQ CT:2.5CT/1CT:1.79CT 4, /.630/.340 MC118 2, 3 SFQ CT:1CT/1CT:.707CT 4, /.630/.340 MC118 2, 3 SGQ CT:1CT/1CT:.707CT 4, /.630/.340 MC118 2, 3 SFQ CT:1CT/2CT:1CT 7, /.630/.340 MC118 2, 3 SGQ CT:1CT/2CT:1CT 7, /.630/.340 MC118 2, 3 SFQ CT:1CT/1.66CT:1CT 4, /.630/.340 MC118 2, 3 SGQ CT:1CT/1.66CT:1CT 4, /.630/.340 MC118 2, 3 SFQ CT:2.12CT/1CT:1.5CT 4, /.630/.340 MC118 2, 3 SGQ CT:2.12CT/1CT:1.5CT 4, /.630/.340 MC118 2, 3 SFQ CT:2.5CT/1CT:1.79CT 4, /.630/.340 MC118 2, 3 SGQ CT:2.5CT/1CT:1.79CT 4, /.630/.340 MC118 2, 3 SLQG CT:1CT/1.4CT:1CT 4, /.630/.280 M104 2 SLQG CT:1CT/2CT:1CT 7, /.630/.280 M104 2 SLQG CT:1CT/1.66CT:1CT 4, /.630/.280 M104 2 SLQG CT:2.12CT/1CT:1.5CT 4, /.630/.280 M104 2 SLQG CT:2.5CT/1CT:1.79CT 4, /.630/.280 M104 2 SLQT CT:1CT/1.4CT:1CT 4, /.630/.280 M104 2 SLQT CT:1CT/2CT:1CT 7, /.630/.280 M104 2 SLQT CT:1CT/1.66CT:1CT 4, /.630/.280 M104 2 X CT:1.79CT 3, /.350/.172 M157 X CT:2.5CT 3, /.350/.173 M157 SMQT CT:3CT/1CT:2.15CT 4, /.625/.251 M Designed and built to conform to MIL-PRF-21038/27 2. Prefix/Operating Temperature : C / 0 C to +70 C ; N / -40 C to +85 C; TQ / -55 C to +125 C continued next page G003.AA (06/13) 89

4 MIL-STD-1553 (continued) Non-QPL, Low Profile and Stacked (continued) 1 Part Turns Ratio Impedance Package* Data Number (± 3%) (W MIN) L/W/H (in.) Sheet 2 SLQT CT:2.12CT/1CT:1.5CT 4, /.630/.280 M104 SLQT CT:2.5CT/1CT:1.79CT 4, /.630/.280 M104 SLQF CT:1CT/1.4CT:1CT 4, /.630/.280 M104 SLQF CT:1CT/2CT:1CT 7, /.630/.280 M104 SLQF CT:1CT/1.66CT:1CT 4, /.630/.280 M104 SLQF CT:2.12CT/1CT:1.5CT 4, /.630/.280 M104 SLQF CT:2.5CT/1CT:1.79CT 4, /.630/.280 M Designed and built to conform to MIL-PRF-21038/ home page, pick DATA SHEETS Non-QPL MIL- STD-1553 Interface Transformers (N_QPL_Cat2_links.pdf) or MIL-STD-1553 InterfaceTransformers - Low profile/stacked/dual Ratio (M104.pdf). Interface Transformers COTS Series 1, 2 Part 2 Turns Ratio Impedance Package* Data 3 Number (±3%) (W MIN) (L/W/H) in. Sheet x CT:1CT/1CT:.707CT 4, /.625/.250 MC118 x CT:1CT/2CT:1CT 7, /.625/.250 MC118 x CT:1CT/1.66CT:1CT 4, /.625/.250 MC118 x CT:2.12CT/1.5CT:1CT 4, /.625/.250 MC118 x CT:2.5CT/1CT:1.79CT 4, /.625/.250 MC Designed and built to conform to MIL-PRF-21038/27 2. Prefix/Operating Temperature: C/0 Cto +70 C; N/-40 C to +85 C; TQ/-55 C to +125 C 3. Web: Interface Transformers Low Profile Miniature Series Part Turns Ratio Impedance Package* Data Number (±3%) (W MIN) (L/W/H) in. Sheet SMG CT:1CT 4, /.400/.185 M112 SMG CT:1CT 4, /.400/.185 M112 SMG CT:1CT 7, /.400/.185 M112 SMG CT:1CT 7, /.400/.185 M112 SMG CT:1.79CT 4, /.400/.185 M112 SMG CT:2.7CT 4, /.400/.185 M112 *Mounting: FP = Flat Pack TH = Through Hole SM = Surface Mount QPL Series Qualified to MIL-PRF-21038/27 Part 1 Military Turns Ratio Impedance Package* Data 2 Number Designation (±3%) (W MIN) L/W/H (in.) Sheet Number Q M21038/ :1.41 3, /.350/.250 MC118 Q M21038/ CT:1CT 3, /.350/.250 MC118 Q M21038/ CT:1.41CT 3, /.350/.250 MC118 Q M21038/ CT:1.66CT 3, /.350/.250 MC118 Q M21038/ CT:2CT 3, /.350/.250 MC118 Q M21038/ CT:1.5CT 3, /.350/.250 MC118 Q M21038/ CT:1.79CT 3, /.350/.250 MC118 Q M21038/ CT:2.5CT 3, /.350/.250 MC118 Q M21038/ CT:1CT/1CT:.707CT 4, /.625/.250 MC118 Q M21038/ CT:1CT/2CT:1CT 7, /.625/.250 MC118 Q M21038/ CT:1CT/1.66CT:1CT 4, /.625/.250 MC118 Q M21038/ CT:2.12CT/1CT:1.5CT 4, /.625/.250 MC118 Q M21038/ CT:2.5CT/1CT:1.79CT 4, /.625/.275 MC118 Q M21038/ CT:1CT/1CT:.707CT 4, /.625/.275 MC118 Q M21038/ CT:1CT/2CT:1CT 7, /.625/.275 MC118 Q M21038/ CT:1CT/1.66CT:1CT 4, /.625/.275 MC118 Q M21038/ CT:2.12CT/1CT:1.5CT 4, /.625/.275 MC118 Q M21038/ CT:2.5CT/1CT:1.79CT 4, /.625/.275 MC118 FPQ M21038/ CT:1CT/1CT:.707CT 4, /.625/.250 MC118 SMQ M21038/ CT:1CT/1CT:.707CT 4, /.625/.250 MC118 FPQ M21038/ CT:1CT/2CT:1CT 7, /.625/.250 MC118 SMQ M21038/ CT:1CT/2CT:1CT 7, /.625/.250 MC118 FPQ M21038/ CT:1CT/1.66CT:1CT 4, /.625/.250 MC118 SMQ M21038/ CT:1CT/1.66CT:1CT 4, /.625/.250 MC118 FPQ M21038/ CT:2.12CT/1CT:1.5CT 4, /.625/.250 MC118 SMQ M21038/ CT:2.12CT/1CT:1.5CT 4, /.625/.250 MC118 FPQ M21038/ CT:2.5CT/1CT:1.79CT 4, /.625/.250 MC118 SMQ M21038/ CT:2.5CT/1CT:1.79CT 4, /.625/.250 MC Part number options: C and T level QPL testing (xxqc1553-xx, xxqt1553-xx, M21038/27-xxC, M21038/27-xxT). 2. Web: Web: Go to home page, select DATA SHEETS on the right-hand navigation bar and from the menu select Military/Aerospace and then click on MC Summary Performance Specifications: Droop = 20% Overshoot = ±1 V MAX; Common Mode Rejection = 45 db Frequency Range (no load) = 75 khz to 1 MHz Operating Temperature Range = -55 C to +130 C Weight = 5 grams Insulation Resistance = Vdc 90 G003.AA (06/13)

5 Pulse offers off-the-shelf inductors and transformers for modern military and aerospace power applications: the SLED, the SLIC, and the POGO series. The SLED series consists of railmount inductors with a ruggedized header for durable board connections, utilizing two rails for board mounting and cores bonded to high temperature headers for durability and mechanical strength. The SLIC series, self-leaded transformers and inductors, has ruggedized construction. The structural header is bonded to the cores and lead wires, increasing mechanical durability. The POGO series is made up of pad-mounted inductors with open construction for robust board mounting and rugged pins used for both surface board mounting and electrical connection. Pulse also offers shielded drum core inductors, including ruggedized mounting hardware to improve board mounting performance for enhanced mechanical durability. These inductors eliminate the use of pure tin plating for compliance with military and aerospace requirements. A variety of inductances and current capacity is offered in five different physical sizes to meet the majority of system OFF-THE-SHELF POWER INDUCTORS & TRANSFORMERS Toroid Power Inductors - SLED Series Irated Irated DCR Inductance Package* Data Number (µh) (A) (mw (µh) L/W/H (in.) Sheet SLED 20 PL /.345/.250 M107 PL /.345/.250 M107 PL /.345/.250 M107 SLED 30 PL /.525/.400 M107 PL /.525/.400 M107 PL /.525/.400 M107 PL /.525/.400 M107 SLED 40 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 PL /.575/.410 M107 SLED 50 PL /.690/.520 M107 PL /.690/.520 M107 PL /.690/.520 M107 PL8143 x /.690/.520 M107 PL /.690/.520 M107 PL /.690/.520 M107 PL /.690/.520 M107 PL /.690/.520 M107 SMT Common Mode Chokes: SLIC Series Part Inductance Irated DCR Package* Data Number (mh ±35%) (A) (mw MAX) L/W/H (in.) Sheet SLIC Series, Common Mode Chokes PL /1.000/.500 M108 PL /1.000/.500 M108 PL /1.000/.500 M108 PL /1.00/395 M108 PL /.670/.395 M108 PL /.670/.395 M108 PL /.670/.390 M108 PL /.670/.395 M108 PL /.670/.395 M108 PL /.500/.215 M108 PL /.500/.215 M108 SMT Power Inductors: SLIC (HCCI-80) Series Irated Irated DCR Inductance Package* Data Number (µh) (A) (mw (µh) L/W/H (in.) Sheet SLIC (HCCI) Series PL8304 P /1.000/.500 M109 PL8303 P /1.000/.500 M109 PL8302 P /1.000/.500 M109 PL8301 P /1.000/.500 M109 PL8304 S /1.000/.500 M109 PL8300 P /1.000/.500 M109 PL8303 S /1.000/.500 M109 PL8302 S /1.000/.500 M109 PL8301 S /1.000/.500 M109 PL8300 S /1.000/.500 M Connection: P = Parallel, S = Series SMT Power Inductors: Toroid, SLED Series SLED 25 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 PL /.525/.310 M113 SMT Power Inductors: Toroid, POGO Series POGO 25 PL8600 P /.525/.310 M114 PL8601 P /.525/.310 M114 PL8602 P /.525/.310 M114 PL8600 S /.525/.310 M114 PL8603 P /.525/.310 M114 PL8601 S /.525/.310 M114 PL8604 P /.525/.310 M114 PL8605 P /.525/.310 M114 PL8602 S /.525/.310 M114 PL8606 P /.525/.310 M114 PL8603 S /.525/.310 M114 PL8607 P /.525/.310 M114 PL8604 S /.525/.310 M114 PL8608 P /.525/.310 M114 PL8605 S /.525/.310 M Connection: P = Parallel, S = Series (continued next page) *SM = Surface Mount G003.AA (06/13) 91

6 OFF-THE-SHELF POWER INDUCTORS & TRANSFORMERS (continued) SMT Power Inductors: Toroid, POGO Series (continued) Irated Irated DCR Inductance Package* Data Number (µh) (A) (mw (µh) L/W/H (in.) Sheet POGO 25 (continued) PL8609 P /.525/.310 M114 PL8606 S /.525/.310 M114 PL8607 S /.525/.310 M114 PL8608 S /.525/.310 M114 PL86 09 S /.525/.310 M114 POGO 40 PL8400 S /.575/.380 M111 PL8700 P /.600/.380 M115 PL8701 P /.600/.380 M115 PL8702 P /.600/.380 M115 PL8703 P /.600/.380 M115 PL8700 S /.600/.380 M115 PL8704 P /.600/.380 M115 PL8701 S /.600/.380 M115 PL8705 P /.600/.380 M115 PL8702 S /.600/.380 M115 PL8706 P /.600/.380 M115 PL8703 S /.600/.380 M115 PL8707 P /.600/.380 M115 PL8704 S /.600/.380 M115 PL8708 P /.600/.380 M115 PL8705 S /.600/.380 M115 PL8706 S /.600/.380 M115 PL8708 S /.600/.380 M115 PL8707 S /.600 /.380 M115 POGO 50 PL8401 S /.700/.510 M111 PL8402 S /.700/.510 M111 PL8403 P /.700/.510 M111 PL8404 P /.700/.510 M111 POGO 60 PL8405 P /1.070/.510 M Connection: P = Parallel, S = Series SMT Common Mode Inductors: Toroid, POGO Series Part Inductance Irated DCR SRF Impedance Package* Data Number (mh ±30%) (A) (mw) MAX (MHz) Curve 1 L/W/H (in.) Sheet POGO 40 PL /.575/.380 M116 PL /.575/.380 M116 PL /.575/.380 M116 POGO 50 PL /.700/.510 M116 PL /.700/.510 M See graph below. SMT Power Inductors: Shielded Drum Core Inductance Part DCR Inductance Saturation Irated 1 Package* Data N (A) 2 Current (µh TYP) MAX) C L/W/H (in.) Sheet PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.280 M117 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.248 M121 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M The rated current as listed is either the saturation current or the heating current depending on which value is lower. 2. Inductance at 0ADC tolerance is ±30%. The tolerance is ±20% on all other parts. Optional Tape & Reel packaging can be ordered by adding a T suffix to the end of the part number. continued on the next page *SM = Surface Mount 92 G003.AA (06/13)

7 OFF-THE-SHELF POWER INDUCTORS & TRANSFORMERS (continued) SMT Power Inductors: Shielded Drum Core (continued) Inductance Part DCR Inductance Saturation Irated 1 Package* Number (A) 2 Current (µh TYP) MAX) C L/W/H (in.) Sheet PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL /.413/.201 M122 PL ±25% /.410/.157 M120 PL ±25% 8.410/.410/.157 M120 PL ±25% /.410/.157 M120 PL ±25% /.410/.157 M120 PL ±25% /.410/.157 M120 PL ±25% /.410/.157 M120 PL ±25% 4.410/.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 PL ±20% /.410/.157 M120 Inductance Part DCR Inductance Saturation Irated 1 Package* Number (A) 2 Current (µh TYP) MAX) C L/W/H (in.) Sheet PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±30% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±25% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL ±20% /.410/.132 M123 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M124 PL /.256/.122 M The rated current as listed is either the saturation current or the heating current depending on which value is lower. 2. Inductance at 0ADC tolerance is ±30%. The tolerance is ±20% on all other parts. Optional Tape and Reel packaging can be ordered by adding a T suffix to the end of the part number. SMT CURRENT SENSE TRANSFORMER Part Turns Ratio Current Rating Secondary DCR Primary DCR Secondary Hipot Package Datasheet Number (A) Inductance (1,3-2,4) (5-6) L/W/H (µh MIN) (W MAX) (W MAX) PL1961 1:1: /.575 /.280 M150 SMT GATE DRIVE TRANSFORMER Part Turns Ratio Pri-Sec Primary Leakage DCR DCR Package Datasheet Number Insulation MAX Inductance Inductance Primary Secondary L/W/H (Vdc) (v* usec) (µh MAX) (µh MAX) PL1960 1: /.340 /.140 M149 *SM = Surface Mount G003.AA (06/13) 93

8 MILITARY/AEROSPACE ETHERNET/AFDX 10/100 Number Part Turns Configuration 1 Package Data of Ports Number Ratio RX TX Style 2 Size L/W/H (in.) Sheet 1 100B CT:1CT T, C, S T,C 12-pin SMT.630/.470/.185 M B-1001X 1CT:1CT T, C, S T,C 12-pin SMT.630/.470/.185 M101 Single 100B CT:1CT T,C T,C 16-pin SOIC.500/.265/.235 M B-1003X 1CT:1CT T,C T,C 16-pin SOIC.500/.265/.235 M B CT:1CT T,C T,C,S 12-pin SMT.583/.470/.180 M B-1018X 1CT:1CT T,C T,C,S 12-pin SMT.583/.470/.181 M189 Dual 100B CT:1CT T, C T,C 24-pin SMT.518/.595/.241 M B-2002X 1CT:1CT T, C T,C 24-pin SMT.518/.595/.241 M110 Quad 100B CT:1CT T,C T,C 40-pin SOIC 1.125/.480/.280 M B-4005X 1CT:1CT T,C T,C 40-pin SOIC 1.120/.480/.280 M B CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B-4009X 1CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B CT:1CT T,C T,C 40-pin SMT 1.125/.480/.280 M B-4011X 1CT:1CT T,C T,C 40-pin SOIC 1.125/.480/.280 M /100Base-TX Single-Port Transformer Modules - Military/Aerospace Grade (M101.pdf) or 10/100Base-TX Quad-Port Transformer Modules - Military/ Aerospace Grade (M102.pdf) at 2. T = Transformer, C = Choke, S = Shunt inductor, SMT = 50 mil pitch leads, SOIC = 100 mil pitch leads PLANARS Height: 7.4mm Max Footprint: 19.8mm x 19.6mm Max Inductance Range:.405μH to 6.2μH Electrical 25 C - Operating Temperature -40 C to +130 C Part DCR (mw) Saturation Current Heating Data 0 ADC Number Irated (μh ±15%) Irated (ADC) TYP MAX (μh ±15%) 25 C 100 C Current (A) Sheet 2-Turn (Low Loss PL M194 PL M194 PL M194 PL M194 PL M194 PL M194 2-Turn Series PL M194 PL M194 PL M194 PL M19 PL M194 PL M194 3-Turn and 4-Turn Series also available G003.AA (06/13)