Model BD1722J50100A00
|
|
- Ruby Dalton
- 5 years ago
- Views:
Transcription
1 Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation wireless chipsets in an easy to use surface mount package covering the DCS, PCS, UMTS and CDMA frequencies. The BD1722J51A is ideal for high volume manufacturing and is higher performance than traditional ceramic, and lumped element baluns. The BD1722J51A has an unbalanced port impedance of 5Ω and a 1Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern semiconductors. The output ports have equal amplitude (db) with 18 degree phase differential. The BD1722J51A is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Features: MHz.7mm Height Profile 5 Ohm to 2 x 5 Ohm DCS/PCS/UMTS/CDMA Low Insertion Loss Input to Output DC Isolation Surface Mountable Tape & Reel Non-conductive Surface RoHS Compliant ROOM (25 C) Parameter Min. Typ. Max Unit Frequency MHz Unbalanced Port Impedance 5 Ω Balanced Port Impedance 1 Ω Return Loss 9 13 db Insertion Loss* db Amplitude Balance db Phase Balance 4 6 Degrees CMRR 29 db Power Handling 2 Watts Operating Temperature ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately.1 db higher at +85 ºC) Outline Drawing Top View (Near-side) Orientation Marker Denotes Pin Location.79±.4 [2.±.1].49±.4 [1.25±.1] Dimensions are in Inches [Millimeters] Mechanical Outline.27±.2 [.7±.5] Pin Side View Designation Unbalanced Port GND / DC Feed + RF GND Balanced Port Balanced Port GND NC Bottom View (Far-side).39 [.98] Orientation Marker Denotes Pin Location X.12 [.3] Tolerances are Non-Cumulative.26 [.65] 6X.9 [.22] Available on Tape and Reel for Pick and Place Manufacturing.
2 Typical Broadband Performance: 5 MHz. to 8.5 GHz. 3 6 Return Loss - Input Insertion Loss Amplitude Balance Phase Balance deg CMRR Available on Tape and Reel for Pick and Place Manufacturing.
3 Typical Performance: 16 MHz. to 23 MHz Return Loss - Input Insertion Loss Amplitude Balance 2 Phase Balance deg CMRR Available on Tape and Reel for Pick and Place Manufacturing.
4 Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ o C. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. No Bias Footprint DC Bias Footprint 6X.14 [.35] 4X.12 [.3] 6X.16 [.35] DC Bias Part Orientation (Top View) Part Orientation (Top View) 6X.11 [.27].29 [.73] 6X.13 [.33].26 [.66] 6X.2 [.5] 6X.2 [.5] 3X Transmission Line Plated thru hole to ground 3X Transmission Line 4X.12 [.3] Circuit Pattern Footprint Pad (s) Solder Resist Dimensions are in Inches [Millimeters] 85 Standard Mounting Footprint Circuit Pattern Footprint Pad (s) Solder Resist Plated thru hole to ground Dimensions are in Inches [Millimeters] 85 DC Bias Mounting Footprint Available on Tape and Reel for Pick and Place Manufacturing.
5 Packaging and Ordering Information Parts are available in reel and are packaged per EIA Parts are oriented in tape and reel as shown below. Minimum order quantities are 4 per reel. See Model Numbers below for further ordering information. ØA ØC ØD QUANTITY/REEL 4 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA B ØC ØD 7. [177.8].32 [8.] 2. [5.8].512 [13.] B Available on Tape and Reel for Pick and Place Manufacturing.
6 Available on Tape and Reel for Pick and Place Manufacturing.
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
More informationModel BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationModel BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
More informationDetailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
More informationModel BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
More informationModel 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
More informationReturn loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
More informationModel B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
More informationModel PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
More informationModel PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
More informationModel C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
More informationModel C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
More informationTop View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationTop View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
More informationInsertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
More informationModel DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
More informationInsertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
More informationAnaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver
(ANN-2005) Rev B Page 1 of 13 Anaren 0805 (B0809J50ATI) balun optimized for Texas Instruments CC1100/CC1101 Transceiver Trong N Duong RF Co-Op Nithya R Subramanian RF Engineer Introduction The tradeoff
More informationElectrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
More informationThin-Film Directional Couplers
DB6N 9 Couplers GENERAL DESCRIPTION RFAP TECHNOLOGY The DB6N 9 Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and
More informationModel X3DC18E2S Rev B
b Doherty Combiner Description The X3DC18E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC18E2S is designed particularly
More informationModel X3DC07E2S. Doherty Combiner. Mechanical Outline
b Model X3DC7E2S Doherty Combiner Description The X3DC7E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC7E2S is designed
More informationModel XC0900P-03AS Rev D
Hybrid Coupler 3 db, 90 Features: 800 1000 MHz AMPS High Power Very Low Loss Tight Amplitude Balance High Isolation Production Friendly Tape and Reel Lead-Free Reliable, FIT=0.49 Mechanical Outline Description
More informationElectrical Specifications Frequency Isolation. Power. Degrees Avg. CW Watts ºC. 90 ± to +95 TOP VIEW SIDE VIEW BOTTOM VIEW.
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for CMMB band applications. The is designed particularly
More informationModel XC0450E-03S Rev D
Hybrid Coupler 3 db, 90 Description The XC0450E-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. The XC0450E-03S is designed
More informationATC 1206 LPF Series High Performance SMT Thin Film Low Pass Filter
ATC 126 HIGH PERFORMANCE LOW PASS FILTER ATC 126 LPF Series High Performance SMT Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External
More informationHC0650F03 Hybrid Coupler 3 db, 90 o
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for CMMB band applications. The is designed particularly
More information1640 MHz MHz Temperature Coefficient -30 ppm/ C Operating Temperature T A C
SF1186B-2 Designed for Front End GPS Applications Low Insertion Loss 3.0 x 3.0 x 1.3 mm Surface-Mount Case No Matching Circuit Required Complies with Directive 2002/95/EC (RoHS) Maximum Ratings at +25
More informationData Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
More informationData Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
More informationData Sheet. ACMD-6003 UMTS Band 3 Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-63 UMTS Band 3 Duplexer Data Sheet Description The Avago ACMD-63 is a highly miniaturized duplexer designed for use in UMTS Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data terminals.
More informationData Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-749 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-749 is a miniature duplexer designed for US PCS handsets. The ACMD-749 is designed with Avago Technologies Film Bulk Acoustic
More informationDifferential Input / Output Impedance Match SM X 5 mm Nominal Footprint Lid Symbolization (YY=year, WW=week, S=shift) 15 pf
SF1189B-1 Designed for WLAN IF Applications Low Insertion Loss 5.0 x 5.0 x 1.7 mm Suface-Mount Case Single Ended or Differential Input and Output Differential Output Complies with Directive 2002/95/EC
More informationModel XC2500A-03S Rev B
Hybrid Coupler 3 db, 90 Features: 2300-2700 MHz WiBro and DMB High Power Very Low Loss Tight Amplitude Balance High Isolation Production Friendly Tape and Reel Lead-Free Reliable, FIT= 1.016 Description
More informationElectrical Specifications ** Insertion Loss. Phase Power. Degrees Avg. CW Watts ºC. 90 ± to +95
Hybrid Coupler 3 db, 90 Description The XEC24A6-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for IMS band,
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationModel X3C26P1-03S Rev F
` Hybrid Coupler 3 db, 90 Description The X3C26P1-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for LTE, WIMAX
More informationData Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
More informationJohanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets. November 2009
Johanson Technology, Inc. 2450BM14A0002 Matched Balun for the Nordic nrf24l01/nrf24l01+ Chipsets November 2009 1. Introduction The nrf24l01/nrf24l01+ from Nordic Semiconductor is a 2.45GHz one chip, ultra
More informationData Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
More informationTypical Performance Data
Ceramic Balun RF Transformer 50Ω 720 to 1600 MHz Maximum Ratings Operating Temperature -40 C to 85 C Storage Temperature -55 C to 100 C Input RF Power*** 3W **Derate linearly to 2.5W at 100 C Permanent
More informationModel X3C26P1-03S Rev C
` Model X3C26P1-03S Hybrid Coupler 3 db, 90 Description The X3C26P1-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed
More informationACX Advanced Ceramic X
FB2012 Series Multilayer Chip Band Pass Filter + Balun Features Monolithic SMD with small, low-profile and light-weight type. Applications 0.8 ~ 6 GHz wireless communication systems, including DECT/PACS/PHS/GSM/DCS
More informationSAW Bandpass Filter F2G12
SAW Bandpass Filter FG Features WCDMA applications Usable bandwidth of 60 MHz No impedance matching require for operation at 50 Ω Ceramic Surface Mounted Device Package (.0 mm *.0 mm ) Singleended Operation
More informationData Sheet. ACMD-7402 Miniature PCS Band Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-742 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-742 is a miniature duplexer designed for US PCS handsets. The ACMD-742 is designed with Avago Technologies Film Bulk Acoustic
More informationSAW Bandpass Filter F4521
Features RF bandpass filter for CDMA0 CBand Tx. Part Usable bandwidth MHz (0 MHz ~ MHz) High attenuation No matching 0Ω singleended operation Ceramic Surface Mounted Device Package (.8 mm.8 mm ) RoHS compliant
More informationData Sheet. ACMD-4102 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port. Features. Description. Specifications.
ACMD-412 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port Data Sheet Description The Avago ACMD-412 is a highly miniaturized duplexer designed for use in UMTS and NCDMA Band 2 (185.48 199.52
More information3dB HYBRID COUPLER. Amplitude Balance db (max) ± ± to +85
FEATURES High Power Low Profile Surface Mount Package Very Low Insertion Loss Excellent Amplitude and Phase Balance High Isolation RoHS Tape and Reel for High Volume Production APPLICATIONS Power Amplifiers
More informationSurface Mount SOT-363 (SC-70) Package. Pin Connections and Package Marking 4 V CC. Note: Package marking provides orientation and identification.
1.5 GHz Low Noise Silicon MMIC Amplifier Technical Data INA-52063 Features Ultra-Miniature Package Single 5 V Supply (30 ma) 22 db Gain 8 dbm P 1dB Unconditionally Stable Applications Amplifier for Cellular,
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationSBB-3089Z Pb MHz InGaP HBT Active Bias Gain Block
Product Description Sirenza Microdevices SBB-389Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable
More informationTypical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.4 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
More informationHigh Frequency Ceramic Solutions
Date: 06/04/2014 2.1mm Abstract The nrf51822 and nrf51422 devices from Nordic Semiconductor are powerful, highly flexible, multiprotocol SoCs designed for Bluetooth low energy, ANT, and 2.4 GHz ultralow
More informationData Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications
ACMD-765 Miniature UMTS Band 8 Duplexer Data Sheet Description The Avago Technologies ACMD-765 is a miniature duplexer designed for use in UMTS Band 8 (88 915 MHz UL, 925 96 MHz DL) handsets and mobile
More informationModel X3C17A1-03WS Rev C
Hybrid Coupler 3 db, 90 Description The X3C17A1-03WS is a low profile, high performance 3dB hybrid coupler in an easy to use, manufacturing friendly surface mount package. It is designed for applications
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationATC 1206 LPF Series High Performance LGA Thin Film Low Pass Filter
ATC 126 LPF Series High Performance LGA Thin Film Low Pass Filter Features: Sharp Cut-off Response Excellent Stopband rejection Characteristic : 5Ω No External Matching Low Power Rating: 12 W Low Profile
More informationSurface Mount SOT-363 (SC-70) Package. Pin Connections and Package Marking GND. V dd. Note: Package marking provides orientation and identification.
GHz V Low Current GaAs MMIC LNA Technical Data MGA-876 Features Ultra-Miniature Package.6 db Min. Noise Figure at. GHz. db Gain at. GHz Single + V or V Supply,. ma Current Applications LNA or Gain Stage
More informationHC2000W03 Hybrid Coupler 3 db, 90 o
Description The is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for GS & WLAN band applications. The is particularly
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
More informationBias Tee 50Ω Wideband 10 MHz to 12 GHz
Surface Mount Bias Tee 50Ω Wideband 10 MHz to 12 GHz The Big Deal Extremely Wideband, 10 MHz to 12 GHz Very low insertion loss, 0.5 db Excellent VSWR, 1.25:1 Tiny size, 0.15 x 0.15 x 0.14 CASE STYLE: GU1414
More information2.4 GHz ISM Band Working Frequency
RFBLN 2012 (0805) Series RoHS Compliance MULTILAYER CERAMIC BALUN TRANSFORMER Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBLN2012090A1T *Contents in this sheet are subject to change
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC461* Product Page Quick Links Last Content Update: 8/3/216 Comparable
More informationNLB-310. RoHS Compliant & Pb-Free Product. Typical Applications
Typical Applications Narrow and Broadband Commercial and Military Radio Designs Linear and Saturated Amplifiers 0 RoHS Compliant & Pb-Free Product NLB-310 CASCADABLE BROADBAND GaAs MMIC AMPLIFIER DC TO
More informationSGA-6489 SGA-6489Z Pb
Product Description The SGA-689 is a high performance SiGe HBT MMIC Amplifier. A Darlington configuration featuring micron emitters provides high F T and excellent thermal perfomance. The heterojunction
More informationHybriX SMT Power Dividers
Introduction HybriX SMT Features Lead free and RoHS compliant Frequency ranges from 420 MHz to 2.4 GHz Low Insertion Loss Surface Mountable High Power: 50 W Max (at 85 C) Excellent Isolation and low VSWR
More informationTypical Performance 1. Absolute Maximum Ratings. Parameter
Device Features Typical Isolation = 23 db Typical Insertion Loss = 0.5 db MSL 3 moisture rating Lead-free/RoHS-compliant SOIC-8 Plastic Package With exposed back side ground pad Product Description BeRex
More informationSurface Mount SOT-363 (SC-70) Package. Pin Connections and Package Marking GND 1 4 V CC
GHz Low Noise Silicon MMIC Amplifier Technical Data INA-63 Features Ultra-Miniature Package Internally Biased, Single 5 V Supply (12 ma) db Gain 3 db NF Unconditionally Stable Applications Amplifier for
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC688LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm Low Conversion Loss:
More informationPreliminary. Electrical Characteristics Characteristic Sym Notes Min Typ Max Units
Preliminary SF1202D CDM 450 F-and RF SW Filter 3.8 x 3.8 x 1.4 mm Surface-mount Package Complies with Directive 2002/95/EC (RoHS) bsolute Maximum Ratings Rating Value Units Maximum Incident Power in Passband
More informationRF V to 4.2V, 2.4GHz Front End Module
3.0V to 4.2V, 2.4GHz Front End Module Package Style: QFN, 20-Pin, 3.5mm x 3.5mm x 0.5mm TXCT _BAIS GND NC 15 14 13 12 11 Features TX Output Power: 23dBm TX Gain: 28dB RX Gain: 11.5dB RX NF: 3dB Integrated
More informationWA04P π type chip attenuator
WA04P π type chip attenuator 50Ω, 1dB to 10dB Size 0402x2 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 6 WA04P attenuator Ver.11 April.-2010 FEATURE 1. Unbalanced π type attenuator
More informationFeatures. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Features Broadband Performance: DC - 8 GHz High Isolation:
More informationHMC540SLP3E v db LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, GHz
HMC54SLP3E v.95 LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8 GHz Typical Applications Features The HMC54SLP3E is ideal for both RF and IF applications: Cellular Infrastructure Wireless
More informationFeatures. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.514 MIXER, 2.5-7. GHz Typical Applications The is ideal for: WiMAX & Fixed Wireless Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Functional Diagram Features
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC689LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32 dbm Low Conversion Loss:
More informationPart No. M Ceramic Wi-Fi / Bluetooth Antenna
DATASHEET Part No. M830320 Product: Wi-Fi/Bluetooth Ceramic Antennas Part No. M830320 Wi-Fi / BT / Zigbee Ceramic Antennas 2.4 GHz Supports: Wi-Fi applications, Agriculture, Automotive, Bluetooth, Zigbee,
More informationFeatures OBSOLETE. LO Port Return Loss db RF Port Return Loss db
v4.18 MODULATOR RFIC, - 4 MHz Typical Applications The HMC497LP4(E) is ideal for: UMTS, GSM or CDMA Basestations Fixed Wireless or WLL ISM Transceivers, 9 & 24 MHz GMSK, QPSK, QAM, SSB Modulators Functional
More informationAM003536WM-BM-R AM003536WM-EM-R AM003536WM-FM-R
AM003536WM-BM-R AM003536WM-EM-R AM003536WM-FM-R DESCRIPTION AMCOM s is an ultra-broadband GaAs MMIC power amplifier. It has 22 db gain and 36dBm output power over the 0.01 to 3.5 GHz band. This MMIC is
More informationFeatures. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
v4.1 Typical Applications The HMC685LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm 8 db Conversion
More informationFeatures. = +25 C, Vcc = +5V [1]
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
More informationApril Multilayer Balun. For MHz HHM17146A1. 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s April 2015 Multilayer Balun For 1920-2170MHz 1.6x0.8mm [EIA 0603]* * Dimensions Code JIS[EIA] Multilayer Balun For 1920-2170MHz Conformity to RoHS Directive SHAPES AND DIMENSIONS
More informationSPECIFICATION. : MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI
SPECIFICATION Part No. : HLA.01 Product Name : 5150-5900 MHz Ceramic Loop antenna WLAN/ Wi-Fi/ HDMI Feature : 3.2mm *1.6mm * 0.5mm Low profile Peak gain 2.1dBi 65%+ Efficiency Typical Compact Size RoHS
More informationHigh Frequency Ceramic Solutions
Page 1 of 5 General Specifications Part Number 245BM14A23 Frequency (MHz) 24-25 Unbalanced Impedance 5 Ω Conjugate match compatible to Balanced Differential Impedance RTL8188EU, RTL8192EU and ST BlueNRG
More informationModel X3C19P1-03S Rev D
Features: 1700-2000 MHz DCS, PCS, WCDMA & LTE High Power Very Low Loss Tight Amplitude Balance High Isolation Production Friendly Tape and Reel Lead-Free Mechanical Outline Hybrid Coupler 3 db, 90 Description
More informationHigh Frequency Ceramic Solutions
Page 1 of 6 Do you need a small sub-ghz or 2.4GHz antenna? Go to: /antennas General Specifications Part Number 9PC15A36 Frequency (MHz) 862-928 24-25 Insertion Loss (db) 1.8 typ (2. max.) 1.3 typ (1.6
More informationFeatures. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 13 db
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E
More informationRF WIREWOUND CHIP INDUCTORS
RF WIREWOUND CHIP INDUCTORS These high frequency High-Q chip inductors feature a monolithic body made of low loss ceramic wound with wire to achieve optimal high frequency performance. These RF chip inductors
More informationJune Multilayer Band Pass Filter (Balance Output Type) For MHz DEA202450BT-7077A1. 2.0x1.25mm [EIA 0805]* * Dimensions Code JIS[EIA]
R F C o m p o n e n t s June 215 Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz 2.x1.25mm [EIA 85]* * Dimensions Code JIS[EIA] Multilayer Band Pass Filter (Balance Output Type) For 24-25MHz
More informationFeatures. Parameter Frequency Min. Typ. Max. Units. Return Loss Off State DC - 20 GHz 19 db
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Hybrids Test Instrumentation SATCOM & Sensors Functional Diagram Features Broadband Performance: DC
More informationSurface Mount Limiter, GHz
Surface Mount Limiter, 2.9 3.3 GHz LM2933-Q-B-301 Datasheet Features Surface Mount Limiter in Compact Package: 8 mm L x 5 mm W x 2.5 mm H Incorporates PIN Limiter Diodes, DC Blocks, Schottky Diode & DC
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationFeatures +3V +5V GHz
Typical Applications The is ideal for: Cellular/4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Features High Isolation: up to Single
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More information"High Frequency Ceramic Solutions"
Page 1 of 12 AEC-Q200 qualification available. General Specifications Part Number Frequency (MHz Peak Gain (dbi typ. Impedance Input Power 3 min. 1 Measured on a 30x40mm GND plane. Eval Board p/n 0900AD47A2450-EB1SMA
More information