PulseJack 1x1 Tab-UP RJ45
|
|
- Teresa Clark
- 5 years ago
- Views:
Transcription
1 Description: 00 Base-TX (Fast Ethernet) RJ x Tab-UP with LEDs -pin (J series) and -pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard, and Hub and Switches. Features and Benefits: RoHS peak wave solder temperature rating 0 C Suitable for CAT & UTP cable or better Meets IEEE 0. specification 0µH minimum OCL with ma bias current High performance for maximum EMI suppression RoHS Compliant Part Number (Number of Ports) Turns Ratios EMI Fingers TX RX MIN J00F0PNL : : No G/Y J00FNL : : YES NONE J0F0PNL : : No G/Y J0FPNL : : YES G/Y J0F0CNL : : No Y/G J0FCNL : : YES Y/G J0FKNL : : YES G/G J0FRNL : : YES RG/RY J0F0NL : : No NONE J0F0PNL : : No G/Y J0FCNL : : YES Y/G JP00UNL : : YES G_O/Y JP0UNL : : YES G_O/Y JP0UNL : : YES G_O/Y Notes:. LEDs Left/Right: G = green, Y = yellow, G_O = green/orange bi-color LED, R = LEDs with resistors. Electrical C - Operating Temperature 0 C to +0 C LEDs L/R Insertion Loss Return Loss 00Ω (±Ω) Crosstalk Common Mode Rejection Hipot (Vrms) J0.G (0/)
2 Part Number Mating Force (MAX) RJ Durability Test Rating Unmating Force (MAX) Durability Plug to Jack Retention (MIN) JP/J Series Ibs./. kgs. Ibs./. kgs. 0 Insertions 0 Ibs./.0 kgs. Part Number JP/J Series RJ Material Specification Shield Contact Housing MSL Material Finish Material Plating Area Solder Area Material Specification Rating Brass 0-0µ inches thick nickel over 0-0µ inches Brass Phosphor Bronze Nickel underplating and selective gold plating µ inches Tin matte finish Thermoplastic UL V-0 Notes:. Connector dimensions comply with FCC dimension requirements.. MSL = Moisture Sensitivity Level rating from to (highest rating =, lowest rating = J Series Mechanicals LEFT LED.0, RIGHT LED.0 MAX, MAX Patent Pending TM PulseJack J0XXXXXX Date Code Country of Origin.0 SHIELD PIN, FRONT VIEW BACK VIEW SIDE VIEW.0,.00,.000 0,00.0,0.0,.00,.00,0.0,.0, BACK 0 X.00,0 PIN #.00 0,0 X , 0,0.0,.0,0 FACE VIEW X R.00 0, MAX RECOMMENDED PANEL CUTOUT.00 (TOP OF PCB 0, TO BOTTOM OF OPENING) X.0,.00 0,0.00,., X.,.,., FRONT.000 0,00.00,.00,.0,.00,0.0,.00,.0,.00 0,., SUGGESTED PCB LAYOUT (Component Side) Dimensions: Inches Unless otherwise specified, all tolerances are ±.00 mm 0, J0.G (0/)
3 J00 J Series Electrical Schematics J0 : : : : 0.00 µf C N/C N/C J0 J0 : C : RECEIVE : C 0.00 µf : RECEIVE 0 LED = P 0 LED = L or R LED = C or K 0 Standard LED Wavelength Forward* V(MAX) (TYP) Yellow nm. V. V Green nm. V. V * With a forward current of 0 ma J0.G (0/)
4 JP Series Mechanicals. [.]. [.]. [0.00].0 MAX. [. MAX.].0 [.0]. ±.00 [. ±.0.] X.00 [.0].00 [.0] X.0 [.].0 [.]. [.]. [.]. [.] Dimensions: Inches Unless otherwise specified, all tolerances are ±.00 mm 0, J0.G (0/)
5 JP Series Electrical Schematics JP00 JP0 : : : : SHIELD 0.00 µf JP0 : : Standard LED Wavelength Forward* V (MAX) (TYP) Yellow nm. V. -. V Green nm. V. -. V Orange 0 nm. V. -. V 0.00 µf * With a forward current of 0 ma SHIELD For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com Europe - comms-apps-europe@pulseelectronics.com Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 0. Pulse Electronics, Inc. All rights reserved. J0.G (0/)
PulseJack 1x1 Tab-UP RJ45
x Tab-UP RJ Description: 00 Base-TX (Fast Ethernet) RJ x Tab-UP with LEDs -pin (J series) and -pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard,
More informationPulseJack Surface Mount 1x1
Description: 00 Base-TX (Fast Ethernet) surface mount RJ single port (x) Tab-UP/DOWN with or without LEDS Integrated Magnetics Connector, designed to support applications such as: Set Top Box and Network
More informationRJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES
RJ-45 WITH INTEGRATED 10/100 BASE Tx LAN MAGNETICS FEATURES The RJmag is a family of modular jacks with integrated Ethernet Magnetics. The RJmag is available with integrated common mode chokes, isolation
More informationCustomer P/N: UDE P/N: Description: RUP-ZZ-0073 RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T. LED:L-Yellow; R-Green/Orange
To: Customer P/N: UDE P/N: Description: RJ45 Tab up over USB3.1 Gen1 stack Through Hole 2.5G Base-T Contact Area : 30μ'' Min. Gold LED:L-Yellow; R-Green/Orange Approved Spec No. Update Date Revision RUP17083-00
More informationRH2-ZZ-0003 USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: USB 3.1 Gen 1 Over RJ45 Through Hole 10/100 Base-T Contact Area : 30μ'' Min. Gold LED:Without LED Approved Spec No. Update Date Revision RH217011-00 2017/6/7 A Checked
More informationGD1-MA-0005 RJ45 1X1 Tab Down Through Hole 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 50μ'' Min. Gold LED:L-Yellow/Green; R-Green 100% RoHS material,without exemption Approved Spec No. Update
More informationCustomer P/N: UDE P/N: GDC-1U2AVN13. Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ Gold LED:L-Yellow/Green; R-Green Spec No. GDC0013-00 Update Date 2015/7/7 Revision C Approved Checked
More informationRH2-ZZ-0002 USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow
To: Customer P/N: UDE P/N: Description: USB 3.0 Over RJ45 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green; R-Yellow Approved Spec No. Update Date Revision RH217007-00 2017/4/12 A
More informationRJ45 Jacks with integrated magnetics
Ordering code: Date: October 2008 EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent
More informationGSG-MA-0001 RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T
To: Customer P/N: UDE P/N: Description: RJ45 1X2 Tab Up T/H, Slim, Sink 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Orange/Green 100% RoHS material,without exemption Approved Spec No. Update
More informationPOE 60W & Light Pipe
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 30μ'' Min. Gold LED: L-Green/Yellow; R-Green/Yellow POE 60W & Light Pipe 100% RoHS material,without
More informationDescription: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe
To: Customer P/N: UDE P/N: Description: RJ45 1X4 Tab Up Through Hole, Long Body 2.5G Base-T Contact Area : 50μ" min. Gold LED:L-Yellow;R-Green PoE 60W & Light Pipe Spec No. Update Date Revision RTK16036-00
More informationCustomer P/N: UDE P/N: Description: GDA-MA-0001 RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow
To: Customer P/N: UDE P/N: Description: RJ45 1X1 Tab Down Through Hole 10G Base-T Contact Area : 30μ'' Min. Gold LED:L-Green; R-Green/Yellow 100% RoHS material,without exemption PoE 60W Approved Spec No.
More informationGM2-MA-0004 RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area :
To: Customer P/N: UDE P/N: Description: RJ45 multiport 2X2 Through Hole 5G Base-T Contact Area : 30μ'' Min. Gold LED:Without LED 100% RoHS material,without exemption Approved Spec No. Update Date Revision
More informationModular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More informationMustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM
Mustang Series Fast Ethernet, TFOCA II, 100Base- TX / FX Media Converter, Multimode, 1310nM Dual Port, Jam Nut FEATURES Compliant with IEEE-802.3:2005 Fast Ethernet 10/100Base-TX and 100Base-FX Optical
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationcompu-shield sfp series
compu-shield sfp series 20-01 - 2016 INELCO the home of unparalleled quality and service in INterconnection and ELectronic COmponents is a European driven company, manufactoring European ideas, solutions
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationData sheet E-DAT Industry RJ45 plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug compliance with class E A to ISO/IEC 11801 Ed.2.2:2011-06,
More informationMBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors
BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationPRODUCT SPECIFICATION
0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug
More informationRR-HR. Simplify your cable assemblies REAR RELEASE CRIMP CONNECTORS RR-HR / E11. D-Sub connectors - Stamped and Formed Contacts.
RR-HR D-Sub connectors - Stamped and Formed Contacts REAR RELEASE CRIMP CONNECTORS CHARACTERISTICS Specifications Connectors according to MIL C24308 Materials and Platings Shells Tinned steel with or without
More information3M IDC Ribbon Cable Socket. Series 891
78-51-- Rev A 1 of 8 M IDC Ribbon Cable Socket Series 891 Product Specification 78-51-- Released: 9-7-11 Austin, TX 7876-9 78-51-- Rev A of 8 Table of Contents Section Page 1. Scope........ M Customer
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationCLOUDSPLITTER Connector System PRELIMINARY
CLOUDSPLITTER Connector System The CLOUDSPLITTER connector system is a single cable solution for powered devices that delivers Cat5e performance and up to 250 watts of power over a single cable. The 8
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationT1/E1/CEPT/ISDN-PRI TRANSFORMERS
/CEPT/ISDNPRI TRANSFORMERS RoHS Compliant Part Number Turns Ratio (Pri:Sec ±2%) RoHS peak reflow temperature rating 245 C Models matched to leading quad and dual T1/ E1/CEPT/ISDNPRI transceivers Crosstalk:
More informationSMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
More informationData Sheet. Description. Features. Transmitter. Applications. Receiver. Package
AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver
More informationPRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS
BOARD/WIRE-TO-BOARD CONNECTORS PRODUCTS FOR SOLDER-TO-BOARD APPLICATIONS Minitek Headers for Pin-in-Paste Processes OVERVIEW Minitek is FCI s brand for board-to-board and wire/cableto-board connectors
More informationData Sheet. AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector. Description. Features.
AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC connector Data Sheet Description The AFBR-59E4APZ is a new power saving Small Form Factor transceiver that gives the
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationFrom dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More informationAFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package
AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver
More informationCM /100/1000BASE-T
Lantech CM-121 10/100/1000BASE-T to 1000BASE-X Standalone Managed Media Converter User s Guide Version 0.94 Trademarks Contents subject to revision without prior notice. All trademarks remain the property
More informationSECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 5 SWITCHING CONNECTORS/MOEBIUS MC-CARD/RP-MCX R199/R299 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents Introduction... 5-4 to 5-5 MOEBIUS Characteristics...
More information3M Mini D Ribbon (MDR) Connectors
M Mini D Ribbon (MDR) Connectors Boardmount Thru-Hole Right ngle Plug Shielded 0 Series S Wiper-on-wiper contact for reliable repetitive plugging S Rugged die cast metal case construction S Screw or ground
More informationMaverick Series Gigabit Ethernet, External TFOCA II *, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm
Maverick Series Gigabit Ethernet, External TFOCA II *, 000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Single Port, Flange Receptacles FEATURES Compliant with IEEE-802.:2005 Gigabit Ethernet Optical
More information3M Mini Serial Attached SCSI (minisas) Cable Assembly
M Mini Serial Attached SCSI (minisas) Cable Assembly 8N6 Series Gbps per channel data rate 6 Conductor signal assembly Multiple lengths available Metal latch designed to ensure retention Two levels of
More information1000BASE-T Copper Transceiver Small Form Pluggable (SFP), 3.3V 1.25Gbps Gigabit Ethernet. Features
Features Hot-pluggable SFP Footprint Fully Metallic Enclosure for Low EMI Low Power Dissipation Compact RJ-45 Connector Assembly Detailed Product Information in EEPROM +3.3V Single Power Supply Access
More informationSECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
More informationBroadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
More informationVOLTAGE TEMPERATURE LD TYPE
Features Compliant with IEEE 802.3z Gigabit Ethernet standard Industry standard 1 9 footprint SC connector Single power supply 3.3/5.0 V Differential PECL inputs and outputs Compatible with solder and
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationSBB-1089 SBB-1089Z MHz, Cascadable Active Bias InGaP/GaAs HBT MMIC Amplifier
Product Description Sirenza Microdevices SBB89 is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current
More informationMustang Series Fast Ethernet, TFOCA II, 10/100Base- TX / FX Media Converter, Multimode, 1310nM, 28VDC
Mustang Series Fast Ethernet, TFOCA II, 10/100Base- TX / FX Media Converter, Multimode, 1310nM, 28VDC Dual Port, Jam Nut FEATURES Compliant with IEEE-802.3:2005 Fast Ethernet 10/100Base-TX and 100Base-FX
More informationRoHS compliant 1310 nm multi-mode Transceiver (2 km) 1x9, SC Duplex Connector, 5.0 V 155 Mbps ATM/ Fast Ethernet
Features RoHS compliant Industry standard 1 9 footprint SC duplex connector Single power supply 5.0 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser
More informationJDX Hybrid Mixed Power & Signal
Integrated Mixed Power Backshell and Signal Fire Waterproof Connector The JDX mixed power and signal connector offers the ability to integrate 2 or 3 power contacts with 6 to 8 signal contacts in one connector
More informationAutomotive Chip Choke EMI Suppression for CAN-Bus Networks 2-Line Common Mode Chokes
Meets AEC-Q200 Requirements Suppression of common mode noise without attenuating the signal Magnetically shielded versions for lower Rdc and higher current USB 3.0 and other high speed differential signal
More informationAFBR-59F3Z Compact 650 nm Transceiver for 1 Gbps Data communication MLCC (Multilevel Coset Coded) over POF (Polymer Optical Fiber) Features
AFBR-59F3Z Compact 650 nm Transceiver for 1 Gbps Data communication MLCC (Multilevel Coset Coded) over POF (Polymer Optical Fiber) Data Sheet Description The Avago Technologies' AFBR-59F3Z transceiver
More informationHigh Speed Interconnects
High Speed Interconnects The Siemon Interconnect Solutions team has developed a full offering of interconnect assemblies for ultra high-speed point-to-point applications. Supporting speeds up to 40Gb/s
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More informationAFBR-59E4APZ-HT. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC Connector. Data Sheet. Features. Description.
Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet, with LC Connector Description The AFBR-59E4APZ-HT is a new power saving Small Form Factor transceiver that gives the system designer a product
More informationWideband Transformers
Document - Wideband Transformers Surface mount and through hole versions Vrms, minute interwinding isolation (hipot), / Watt RF input power ma current rating. For a smaller package size, see our WBC Series
More informationHCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
More informationFeatures. Ordering Information
Features RoHS compliant Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC connector Single power supply 3.3 V Differential PECL inputs and outputs Class 1 laser product
More informationProduct Specification 10Gb/s Laserwire Serial Data Link Active Cable FCBP110LD1Lxx
Product Specification 10Gb/s Laserwire Serial Data Link Active Cable FCBP110LD1Lxx PRODUCT FEATURES Single 1.0 10.3125 Gb/s bi-directional link. RoHS-6 compliant (lead-free) Available in lengths of 3,
More informationData Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
More informationRoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC 11801
More informationRoHS Compliant 1310 nm Multi-mode Transceiver 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Low power consumption Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Class 1 laser product complies with EN 60825-1 Ordering
More informationPART NUMBER TX RX VOLTAGE TEMPERATURE. LSB2-A3M-PC-N nm 1310 nm 3.3 V 0 C to 70 C LSB2-A3M-PI-N nm 1310 nm 3.
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationTEST SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND MATE INTERFACE (BMI) (WIRE TO PCB AND WIRE TO WIRE)
SUMMARY MINI-FIT JR. CONNECTOR SYSTEM STANDARD AND BLIND (WIRE TO PCB AND WIRE TO WIRE) 1.0 SCOPE This specification covers the 4.20 mm (.165 inch) centerline connector series terminated with 18 to 24
More informationPARAMETER SYMBOL MIN MAX UNITS NOTE
Features Industry standard 2 5 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser product complies with
More informationReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
More informationFeatures. Description. PART NUMBER TX RX VOLTAGE TEMPERATURE KSB2-A3S-PC-N nm 1310 nm 3.3 V 0 C to 70 C
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationTGL2201-SM T/R. Wideband Dual Stage VPIN Limiter. Applications. Ordering Information. Part No. ECCN Description
Applications LNA Receiver Chain Protection Military Radar Product Features 2-12 GHz Passive, High Isolation Limiter Low Loss < 1.0 db, X-band Return Loss > 10 db Flat Leakage < 18 dbm Input Power CW Survivability
More informationANN-MS. active GPS antenna. Data Sheet. locate, communicate, accelerate. Abstract
locate, communicate, accelerate ANN-MS active GPS antenna Data Sheet Abstract The ANN active GPS antenna with integrated low-noise amplifier (LNA) is the perfect match to the u-blox GPS receivers. 48 x
More informationCAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
More informationGigabit Ethernet LC Bi-directional SFP Transceiver (40km) RBT12SEX
RoHS Compliant Gigabit Ethernet LC Bi-directional SFP Transceiver (40km) RBT12SEX Applications Gigabit Ethernet 1X Fiber Channel Description Features RoHS compliant Bi-directional GbE single / multi-rate
More informationHAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationAirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
More informationAFBR-59E4APZ. Data Sheet. Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet and FDDI, with LC Connector. Description.
Data Sheet AFBR-59E4APZ Multimode Small Form Factor (SFF) Transceiver for Fast Ethernet and FDDI, with LC Connector Description The AFBR-59E4APZ is a new power saving Small Form Factor transceiver that
More informationData Sheet. ACPF-8040 Bandpass Filter for 3GPP Band 40. Features. Description. Functional Block Diagram. Specifications (Typ, 25 C) Applications
ACPF-84 Bandpass Filter for 3GPP Band 4 Data Sheet Description The Avago ACPF-84 is a miniaturized Bandpass Filter designed for use in 3GPP Band 4 wireless applications (23 24 MHz DL, 23 238 MHz UL). The
More information3M High Routability External MiniSAS Cable Assembly 8G26 Series Product Specification Revised
Page 1 of 7 Product Specification 78-5102-0099-7 Revised 11-16-11 Contents Title Page and Contents......................................................... 1 1.0 Scope....................................................................
More informationRoHS Compliant TX-1310/RX-1550 nm Single-mode Bi-directional 2
Features Compliant with IEEE 802.3z Gigabit Ethernet Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash
More informationNBASE-T Copper Transceiver Small Form Factor Pluggable (SFP+), 3.3V 100M/1G/2.5G/5G/10Gbps Ethernet. Features
Features 10Gbps Links up to 35 m using Cat 6a/7 Cable 100M/1G/2.5G/5Gbps Links up to 100 m using Cat5e Cable Low Power Consumption 2.2W Max, 35m @ 10Gbps, 75 C 1.88W Max, 100m @ 2.5G and 5Gbps, 75 C 1.88W
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationData sheet E-DAT modul 2 port AP Cat.6 A, pearl white
Illustrations Dimensional drawing Wiring Page 1/7 See enlarged drawings at the end of document Product specification surface-mounted termination unit with E-DAT modul component testing for Cat.6 A to ISO/IEC
More informationData Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
More informationRoHS compliant 1310 nm Single-mode Transceiver (1000BASE-LX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet
Features RoHS compliant Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 2 5 footprint LC duplex connector Single power supply 3.3V Compatible
More informationMulti-rate Gigabit Ethernet & Fibre Channel SFP Transceivers with Digital Diagnostics
Multi-rate Gigabit Ethernet & Fibre Channel SFP Transceivers with Digital Diagnostics TRPEG-EG Single Mode Pb Product Description The TRPEG-EG SFP series of multi-rate fiber optic transceivers with integrated
More informationSBB-5089Z GHz, Cascadable Active Bias InGaP HBT MMIC Amplifier
Product Description Sirenza Microdevices SBB-89Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable
More informationFeatures. Parameter Min. Typ. Max. Units. Frequency Range 8 12 GHz GHZ. Input Return Loss* GHZ 10 db
v6.316 MMIC 4-BIT DIGITAL Typical Applications The HMC43LC4B is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Functional Diagram Features Low RMS Phase Error:
More informationModel PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
More informationModel PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
More informationRosenbergerHSD Number Codes
RosenbergerHSD Number Codes D4 K 1 0 A 1 xx A5 y Coding A Jet Black / Graphite Black B Cream White C Signal Blue / Light Blue D Claret Violet E Leaf Green / May Green F Nut Brown Z Water Blue (Neutral
More informationSTANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
More informationLightning Series MIL-DTL Optical Transceiver, 100Base-FX / Fast Ethernet Applications, Multimode, 1310nm
Lightning Series MIL-DTL-38999 Optical Transceiver, 100Base-FX / Fast Ethernet Applications, Multimode, 1310nm Dual Port, Receptacle FEATURES Suitable for 100Base-FX / Fast Ethenet applications @ 125Mbps
More information