7M Series Snap-Acting Pushbutton Switches
|
|
|
- Gervais Gordon
- 5 years ago
- Views:
Transcription
1 Series Snap-cting SPECIFICTIS CTCT RTING: Dependent upon contact material see page 08. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. -VDC 00m for both silver and gold plated contacts. INSULTI RESISTNCE:,000M min. DIELECTRIC STRENGTH:,000 Vrms min.@sea level. OPERTING TEMPERTURE: -0 C to 8 C. MTERILS CSE: Diallyl phthalate(dp) (UL9V-0). PLUNGER: Glass filled Nylon or Glass filled polyester. BUSHING: Brass,nickel plated. HOUSING: Stainless Steel. CTCT: Copper alloy, silver or gold plated. (See Page 08) HOW TO ORDER MODEL CTUTOR BUSHING FRME CP COLOR COLOR See below TERMINTIS TERMINL MTERIL RoHS CPS SOLDERING (See Page 08) Model S7 On-Mom D7 On-Mom Model SL On-On DL On-On ctuator Bushing B0 B B0 B P P P P P P Bushing B0 B B70 B7 P P. high,keyway (the std). high,flat (the std). high,keyway (non-thd). high,flat (non-thd) Cap only Cap frame Cap only-(flat) Cap frame-(flat) Cap with frame for LED,snap-in Cap with frame for LED,snap-in-(flar) 7. high,keyway (the std) 7. high,flat (the std) 7. high,keyway (non-thd) 7. high,flat (non-thd) Cap frame Cap with frame for LED,snap-in P. high P 7. high(for lock) P. high (Metal material) PB 7.00 high (Metal material,/ bushing) PC 8.7 high (Metal material,b0 bushing only) Terminations M M M M MN VS VN VS VS VS Frame/Cap color ITEM NO COLOR White Black (Std) Red Orange Yellow Green 7 Blue 8 Brown 9 Gray Terminal material Q Silver R Gold G Gold,pure-tin S Silver,pure-tin C Gold over silver K Gold over silver,pure-tin Solder Lug PC thru-hole Wire wrap Right angle, PC thru-hole Right angle, snap-in, PC thru-hole Vertical right angle, PC thru-hole.8 high, V-bracket.8 high, snap-in V-bracket.00 high, V-bracket.8 high, V-bracket.00 high, V-bracket Seal E (std) N NO Caps C C C C C C7 KC RoHS soldering Rohs Compliant S Rohs & Lead Free F Halogen Free+RoHS 99
2 SWITCH FUNCTI POLES UL/CS MODEL MODEL SWITCH FUNCTI POS. POS. CNECTED TERMINLS / SCHEMTIC POS. POS. SP Q77 S7 MOM - NC (COMM) NO - NC (COMM) NO DP Q77 D7 MOM -,- (COMM) NC NO NC NO -,- (COMM) NC NO NC NO POLE S FLT Part No. Shown : S7PBMQE.8. Ø. Ø.0 /-0UNS NC NO COMM..0 Snap-cting FLT Part No. Shown : D7PBMQE Ø. Ø /-0UNS NC NO COMM..0 CTUTOR S P P PBB PCB handle, metal material handle, metal material handle, metal material Ø. Ø.0 /-0UNS Ø. Ø.0 /-0UNS Ø. Ø8.00 /- UNS- Ø. Ø.9 /-0UNS BUSHING S Use with B bushing only Use with B0 bushing std * PC ctuator only for KC Cap B0 THD STD B0 N-THD /-0UNS- B THD STD B N-THD /-0UNS
3 Series Snap-cting M COMM. N.O. N.C Ø. Ø.0 Part No. Shown : S7PB0MQE SECTI - Ø.07 Ø M Ø. Ø COMM. N.O. N.C Ø.07 Ø Part No. Shown : D7PB0MQE SECTI Ø. Ø NC NO COMM Ø.07 Ø Part No. Shown : S7PB0QE SECTI Ø. Ø Part No. Shown : D7PB0RE NC NO COMM SECTI -.8 Ø.07 Ø
4 VS - VS DIM. '' Ø. Ø.0..8 Part No. Shown : S7PB0VSRE C. NC VS VS DIM. '' Ø.07 Ø.8 Snap-cting VS - VS VS - VS Ø. Ø.0 DIM. '' DIM. '' Ø. Ø Part No. Shown : D7PB0VSQE.0. Part No. Shown : S7PB0VSQE C. NC..0.7 C. NC VS VS VS VS DIM. '' DIM. '' Ø.07 Ø Ø.07 Ø VS - VS DIM. '' Ø. Ø Part No. Shown : D7PB0VSQE C. NC VS VS DIM. '' Ø.07 Ø SNP-IN TERMINTI S MN VN 0
5 P CP & FRME L.E.D. SNPS SECURELY INTO FRME. HEIGHT DEPENDS L.E.D. USED..0. R.00 R Ø. Ø PNEL LYOUT FRME Part No. Shown : S7PMQE.07 TO..9 TO.8 PNEL THICKNESS CP ND FRME COLORS COLOR Snap-cting P CP & FRME Part No. Shown : S7P9MRE TERMINTI S FRME L.E.D. SNPS SECURELY INTO FRME. HEIGHT DEPENDS L.E.D. USED..07 TO..9 TO.8 PNEL THICKNESS LED COLORS WHITE BLCK(std) RED COLOR RED(std) ORNGE GREEN M Solder lug M PC Thru-hole M Quick connect M Wire Wrap ''.00(0.7) THK..00(0.7) THK..00(0.7) THK..00(0.7) THK. OTHER TERMINTI S M RIGHT NGLE P.C. MOUNT RIGHT NGLE P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT M- M- M- M- DIM. ''.70 (9.0).9 (.8). (0.80).0 (.0) 0
6 P CP & FRME L.E.D. SNPS SECURELY INTO FRME. HEIGHT DEPENDS L.E.D. USED..0. R.00 R Ø. Ø PNEL LYOUT FRME Part No. Shown : S7PMQE.07 TO..9 TO.8 PNEL THICKNESS CP ND FRME COLORS COLOR Snap-cting P CP & FRME Part No. Shown : S7P9MRE TERMINTI S FRME L.E.D. SNPS SECURELY INTO FRME. HEIGHT DEPENDS L.E.D. USED..07 TO..9 TO.8 PNEL THICKNESS LED COLORS WHITE BLCK(std) RED COLOR RED(std) ORNGE GREEN M Solder lug M PC Thru-hole M Quick connect M Wire Wrap ''.00(0.7) THK..00(0.7) THK..00(0.7) THK..00(0.7) THK. OTHER TERMINTI S M RIGHT NGLE P.C. MOUNT RIGHT NGLE P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT VS VERTICL BRCKET P.C. MOUNT M- M- M- M- DIM. ''.70 (9.0).9 (.8). (0.80).0 (.0) 0
7 Series Snap-cting SWITCH FUNCTI POLES UL/CS MODEL MODEL SWITCH FUNCTI POS. POS. CNECTED TERMINLS / SCHEMTIC POS. POS. SP Q7 SL - (COMM) - (COMM) DP Q7 DL -,- (COMM) -,- (COMM) MOM=MOMENTRY POLE S TRVEL.8.00 Ø. Ø.9 /-0UNS COMM..0 7 M (Lock ) Part No. Shown : SLPB0MQE TRVEL.8.00 Ø. Ø.9 /-0UNS COMM..0 Part No. Shown : DLPB0MQE BUSHING S B0 THD STD B70 N-THD B THD STD B7 N-THD.7.90 /-0UNS /-0UNS
8 TERMINTI S M Solder lug M PC Thru-hole M Quick connect M Wire Wrap ''.00(0.7) THK..00(0.7) THK..00(0.7) THK..00(0.7) THK. 7 M (Lock ) M VS VS OTHER TERMINTI S RIGHT NGLE P.C. MOUNT RIGHT NGLE P.C. MOUNT VERTICL BRCKET P.C. MOUNT VERTICL BRCKET P.C. MOUNT M- M- M- M- DIM. ''.70 (9.0).9 (.8). (0.80).0 (.0) Snap-cting TERMINTI S M Ø. Ø.9 Part No. Shown : SLPB70MQE SECTI - Ø.07 Ø M Ø. Ø.9 Part No. Shown : DLPB70MQE SECTI - Ø.07 Ø
9 Series Snap-cting Ø. Ø Part No. Shown : SLPB70QE SECTI - Ø.07 Ø Ø. Ø Part No. Shown : DLPB70QE SECTI -.8 Ø.07 Ø M (Lock ) VS - VS '' Ø.7 Ø.9..8 Part No. Shown : SLPB70VQE VS VS DIM. '' Ø.07 Ø.8 VS - VS Ø.7 Ø VS VS DIM. '' '' Part No. Shown : DLPB70VQE Ø.07 Ø
10 CP S For,7 Series LY, CP Colors: White, Black, Green, Red C C C C Ø.0 Ø Ø.8 Ø9. Ø.97.9 Ø Ø.97 Ø C C7 KC for PC actuator only Ø.9 Ø Ø.9 Ø Ø.9 Ø M (Lock ) Snap-cting..0 DRESS NUTS HDW HDW for C Cap HDW for C Cap Ø.78. Ø. I.D. Ø.9 Ø Ø.0 Ø Ø.0 I.D. Ø.0.. Ø. I.D. Ø0. Ø. I.D. Ø8.0 /-0 UNS.08. /-0UNS /-0UNS.. MNU-M9 MNU-M0 MNU-M CTCT MTERIL S Q S C K R G CTCT PLTING Silver Gold over Silver Gold TERMINL PLTING Q = Silver S = Silver,pure - tin C = Gold over silver K = Gold over silver,pure - tin R = Gold G = Gold,pure - tin RTINGS mps with resistant 0VC or 8VDC mps with resistant 0VC 0. Volt - mps ( V ) 0V max. ( C or DC ) SOLDERING PROCESSES MNUL SOLDERING: Use soldering iron of 0 watts, controlled at 0 C approximately seconds while applying solder. WVE SOLDERING: Recommended Soldering Temperature: 0 ± C Duration of Solder Immersion: Max sec. (PCB is.mm in thickness) 08
SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5
M Series Minature SPECIFICTIS CTCT RTING: Dependent upon contact material See page. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
Sealed Toggle Switches. Contact Material Q silver plated R gold plated G gold over silver K tin plated
E E TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q terminal) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000
Miniature Toggle Switches
T0-T SPECIFICTIS CTCT RTING: @0 VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min. DIELECTRIC STRENGTH:,00
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
Miniature Toggle Switches SPECIFICTIS CTCT RTING: @ VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min.
Pushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
Series 300. Miniature Rocker & Paddle Switches
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and
Preliminary. Datasheet
Features/Benefits IP68 sealed to endure harsh environments,000,000 life cycle Longer solder leads for ease of wire installation Multiple housing styles Up to 5 resistive load Wirelead options available
F Series Pushbutton Switches
Switches Features/Benefits Up to poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
TOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
1M Series Miniature Single Pole Toggle Switches
M Series Miniature Single Pole Toggle Switches 0.0. / - 0NS POS POS POS.0 0..0.. 0. 0... 0.0 CONNETED TEMINALS Model Model Pos. Pos. Pos. Pos. Pos. Pos. SP MS On None On MS On None Mom - OPEN - MOM=Momentary
ROCKER SWITCHES B 1 SERIES 3A SPECIFICATIONS AGENCY APPROVALS
Miniature Rocker & Paddle switches HOW TO ORDER AGENCY APPROVALS C File N E195524 File N E195524 CHARACTERISTICS The most comprehensive range of terminations, brackets, toggle sizes and bushings. Dially
TL series Tiny washable toggle switches
Distinctive features and specifications Sealed Single piece case O-ring seal between actuator and bushing Epoxy sealed terminals Wide variety of contact materials Same PCB layout as TP, TR and TG tiny
Rocker and Paddle Switches
R2 Specifications: Contact rating : 5 A with resistant load at 120 V ac or 28 V dc 2 A with resistant load at 250 V ac Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 10 mω
Ultraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
Quick Reference Guide Gemini Series Switches
Quick Reference Guide The TE Connectivity extensive Gemini A and Gemini AE Series offer one and two poles with multi circuit configurations, including: momentary function, locking toggle to avoid unwanted
1SS/1S1/1SM SUB-MINIATURE ROCKERS
SS/S/SM S-Series SUB-MINIATURE ROCKERS The S family of sub-miniature rocker switches is composed of three switch series; the S-Series sub-miniature rocker switch, the SS-Series sealed sub-miniature rocker
SMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.
SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials
TT, Tiny Toggle Switch
TT, Tiny Toggle Switch Features Compact design Vertical and horizontal right angle versions available Typical performance characteristics Contact configuration..........................., and pole Contact
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches TE Connectivity offers the Tiny line of switches in a range of ratings from 0.4VA up to 3A @125 VAC. The extensive product line includes
General Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
Gemini A Series. Features. Toggle Switches. Toggle Switches
Gemini A Series Features Gold, gold over silver or silver contacts Epoxy sealed terminals Stainless steel frame with brass tin plated solder support Hardware included Boot seals available Typical performance
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
K5V Right Angle Lighted SMT Tact Switch
Right ngle Lighted SMT Tact Switch Features old plated dome contact SPST/SPDT Excellent ergonomics High bright leds Reduced space usage on board 0 N overload Tape and reel RoHS compliant and compatible
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
RTBH Series 1-2 Pole Coded Rotary Switches Features/Benefits
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
IP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications Illuminated or non-illuminated UG1212-A-R1 Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL
General Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
B3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
Ledex Low Profile Linear Solenoids
Ledex Low Profile Linear Solenoids 8. (55.9) 6. (66.9). (77.9). (89.) % Duty Cycle W 5% Duty Cycle 8W 5% Duty Cycle 6W % Duty Cycle W Ledex Low Profile Solenoids Linear actuation Space-saving, low-profile
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
ST SERIES - MINIATURE ROCKER & LEVER SWITCHES
ST SERIES - MIIATURE & SWITCHES SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel
TERMINAL BLOCKS BULkhEAD & PC BOARD mount TB & TD SERIES
dam Technologies, Inc. TERMINL LOCKS ULkhED & PC ORD mount T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and
BNC Connectors (50 ohm/75 ohm)
BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors
COMPANY PROFILE HISTORY
COMPANY PROFILE CHILY Precision was founded in May 1969. Headquarter in Wugu, New Taipei City and factory in Guangdong, China with almost 300 employees. CHILY is the manufacturer for variety of POWER switches
SMB Connectors, 50 Ohm
SM Connectors, 50 Ohm Straight Plugs Max. 21.10 [.830] Max. Outer Other Metal s Dielectric Style 178, 178, 178, 196, 196 Gold Gold Nickel TEFLON MIL 413985-6 MIL 413985-1 Gold Gold Nickel TEFLON MIL 413985-3
Amphenol AssembleTech. Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/86/94150234.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
General Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
![.100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES](/thumbs/90/102427427.jpg ".100 RECEPTACLE STRIPS SINGLE AND DUAL ROW.100 [2.54] CENTERLINE RS SERIES")
dam Technologies, Inc. INTRODUCTION: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements.
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
Type SCR Commutating Capacitors
Type SCR Commutating Capacitors Type SCRN Film-Paper/Extended Foil Commutating Capacitor Type SCRN capacitors are for SCR (silicon controlled rectifier) commutating applications that require high peak
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
MBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors
BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board
ITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
Contents. Mini Cool Edge IO (MCIO) Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection Guide Product Specifications........
TERMINAL BLOCKS BULKHEAD & PC BOARD MOUNT TB & TD SERIES
TERMINL LOCKS ULKHED & PC ORD MOUNT T & TD SERIES INTRODUCTION: dam Tech T & TD series Terminal locks are a full range of locks which are most commonly used to terminate wires and eliminate splicing. They
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
Spring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
SERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
AirBorn 4321 AirBorn Drive Addison, TX United States
AirBorn Series Body Size (number of contacts) Contact Type Hardware Type JULY 2009 AirBorn has been manufacturing high reliability interconnect systems for more than 45 years with leading-edge, innovative
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
High-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
General Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
GHz BGA SOCKET - direct mount, solderless
45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression
Ledex Tubular Linear Solenoids
Ledex Tubular Linear Solenoids Force lbs. (newtons) 10 (.) (35.5) 6 (6.69) (17.79) 10% Duty Cycle 70W 5% Duty Cycle W 50% Duty Cycle 1W 100% Duty Cycle 7W saia-burgess Solenoids 1-00-99-9 www.saia-burgess-usa.com/ledex
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
Surface. Mount. Fasteners. Revised 908
Surface Mount Fasteners Revised 98 SURFACE MOUNT FASTENERS PEM ReelFast surface mount nuts, spacers, panel fasteners and R ANGLE fasteners are mounted to printed circuit boards in the same manner as other
2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB D*U Series Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
Amphenol AssembleTech. Contents. SlimSAS LP Cable Assemblies. Amphenol AssembleTech Technical Datasheet
Technical Datasheet Contents Introduction........ 2 Description Features and Benefits Applications Industry Standards Technical Documents Part Numbers.......3 Table 1. Cable Connector Part Number Selection
Silver Ball Matrix BGA Socket
A1 corner 4.600 Silver Ball Matrix BGA Socket Features Wide temperature range (-55C to +0C). Current capability is 4A per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact resistance
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY Series GRF121 SERIES GRF121 RELAY TYPE RF Magnetic-Latching, SPDT, Surface Mount Relay DESCRIPTION The ultraminiature
XA CONNECTOR. 1Certified LR R
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Specifications Current rating: 3 A AC DC (AWG #22, #20) Voltage rating: 250 V AC DC Temperature range: -25 C to +85 C (including
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
PLEDxN Series. PLED Open LED Protectors PLEDxN Series. RoHS. Description
RoHS Description The open LED protector provides a switching electronic shunt path when a single LED in an LED string fails as an open circuit. This ensures the entire LED string will continue to function
0.80mm SUB-MICRO HEADERS 1.00mm MICRO HEADERS
dam Technologies, Inc. 0.80mm SU-MIRO HRS 1.00mm MIRO HRS.031" [0.80] & " NTRLIN MPH & SPH / MRS & SRS INTROUTION: dam Tech 0.8mm and 1.00mm and Female Header series is a fine pitch, low profile, dual
HEADER & HOUSING SYSTEMS
dam Technologies, Inc. HEDER & HOUSING SYSTEMS.8mm, 1mm, 1.25mm, 1.5mm, 2mm & 2.5mm INTRODUTION: dam Tech 2H & 2SH Series of multiple pitch Headers and Housings are a matched set of rimp Wire Housings
lif flex CirCUit ConneCtor 2.54mm [.100"] CeNTerliNe 1.25mm [.049"] CeNTerliNe 1.00mm [.
![lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.](/thumbs/80/80818919.jpg "lif flex CirCUit ConneCtor 2.54mm [.100] CeNTerliNe 1.25mm [.049] CeNTerliNe 1.00mm [.")
dam Technologies, Inc. INTRODUTION: dam Tech P Dual Series Port D-Sub Flexible onnectors Printed ircuit provide (FP) the and means Flexible to increase Flat able I/O (FF) without connectors utilizing are
SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS
38.500 SMP-CGA DIRECT MOUNT, SOLDERLESS SOCKET FOR BURN-IN AND TEST APPLICATIONS FEATURES: Wide temperature range (-55C to +155C ) xga IC High current capability (up to 4A ) Excellent signal integrity
2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Products Available From
Products vailable From Solid State Relays and I/O Modules atalog utomation ontrols atalog Switches and Sensors atalog Motors and Fans atalog Pneumatics atalog 5 For your copy of the catalogs, contact Tel:
Teccor brand Thyristors 15 Amp Standard & 16 Amp Alternistor (High Commutation) Triacs
Qxx15xx & Qxx16xHx Series RoHS Description The 15 mp and 16 mp bi-directional solid state switch series are designed for C switching and phase control applications such as motor speed, temperature modulation
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
TERMINAL BLOCKS BARRIER
See More Online From 440+ Top Brands. BARRIER FLEXI-BLOCK CUT-AWAY TERMINAL BLOCK SYSTEM TRI-BARRIER FLEXI-BLOCK FLEXI-BLOCK FLEXI-BLOCK End Stop Standard Track Flanged Track Custom-made terminal blocks
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
Long-distance Separate-amplifier Proximity Sensors ES Series Features Detecting distance twice that of conventional
Long-distance Separate-amplifier ES Series Features Detecting distance twice that of conventional sensors Detecting distance easily adjustable Wide range of sensor head types available Built-in alarm output
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
Sectional Terminal Blocks
General Information: Sectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
At Larsen we want our customers to be confident they can find the right antenna for the right
MOBILE ANTENNAS At Larsen we want our customers to be confident they can find the right antenna for the right application. For this reason, we have provided some guidelines for mobile antenna selection.
DRTXM2 TRANSMITTER BILL OF MATERIAL IDENT QTY PART NUMBER DESCRIPTION
DRTXM2 TRANSMITTER BILL OF MATERIAL H1 C1-5,7,10-11,15,17-18,20, 22-28,34,38, 43-46,49-53,1A,2A 8 Right Angle LED Mount 0 0.01uf 50V Ceramic Disc Capacitor 31 0.1 UF/50V Decoupling Capacitors C13,14,39-42
Compact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High