TERMINAL BLOCKS BARRIER

Transcription

1 See More Online From 440+ Top Brands. BARRIER FLEXI-BLOCK CUT-AWAY TERMINAL BLOCK SYSTEM TRI-BARRIER FLEXI-BLOCK FLEXI-BLOCK FLEXI-BLOCK End Stop Standard Track Flanged Track Custom-made terminal blocks are interchangeable with all standard terminal blocks. Just pull terminal blocks, assembled on tape, from convenient, stackable dispenser carton and cut to desired number of blocks with mfg. part no track and tape cutting tool, ordered separately below. Then cut standard track to length of terminal blocks plus two extra spaces to accommodate two nylon end stops. Slide terminals into track and secure with end stops to complete assembly. Predrilled holes in track allow quick mounting on flat or curved surfaces. In addition to direct application of wire ends under screw heads, terminal blocks accept up to four levels of single and double FASTON jumper tab plates, ordered separately below. Available in two sizes: size #6 blue is rated 15 amps/00 volts maximum with AWG wire; size #8 yellow is rated 0 amps/600 volts maximum with AWG wire. UL recognized, CSA certified. SIZE #6 BLUE FLEXI-BLOCK COMPONENTS AND KITS SOLD IN PACKAGES OF 100 Description Stock No Block Assemblies on Tape 82F Nickel-Plated Brass Screws (100 Block Dispenser) End Stop (2 Required*) 82F FASTON Tab Plate 87F SIZE #6 BLUE FLEXI-BLOCK COMPONENTS AND KITS SOLD INDIVIDUALLY Description Stock No Std. Track (80 Position) 82F Track Flanged for Marker 82F ID (80 Position) #6 Kit includes: Block 82F Assembly, 50 End Stops, Flanged Tracks #6 Kit includes: Block Assembly, 25 End Stops, 2 Standard Tracks 87F SIZE #8 YELLOW FLEXI-BLOCK COMPONENTS AND KITS SOLD IN PACKAGES OF 100 Description Stock No Block Assemblies on Tape 98F Nickel-Plated Brass Screws (100 Block Dispenser) End Stop (2 Required*) 87F FASTON Tab Plate 18M FASTON Tab Plate 95F SIZE #8 YELLOW FLEXI-BLOCK COMPONENTS AND KITS SOLD INDIVIDUALLY Description Stock No Std. Track (60 Position) 87F Track Flanged for Marker 87F ID (60 Position) #8 Kit includes: Block 87F Assembly, 50 End Stops, Standard Tracks Jumper Tab 9B SIZE #6 AND #8 TABS Flat 18M F F *Per Assembly; Size #6 Jumper; For Sizes #6 and #8 (5461) Snip it Slide it Snap it FLEXI-BLOCK Block Assembly on Tape 4PCV SERIES VERTICAL MOUNT, 0.25 (8.26) CENTER SPACING 150V AWG wire clamp screws. 0.5H x 0.6 W (12.70 x 15.24). Length Positions Stock No. 4PCV (57.66) 8 1H PCV SERIES VERTICAL MOUNT, 0.75 (9.5) CENTER SPACING 00V AWG. 6-2 wire clamp screws. 0.6H x 0.7 W (15.24 x 17.78). Length Positions Stock No. 6PCV (20.6) 2 96B PCV (47.6) 6 95C (104.78) 12 81C PCV (15.2) 14 92C (142.88) 16 92C PCV SERIES VERTICAL, (11.10) CENTER SPACING 0A at 600V UL and CSA AWG UL and CSA wire range. 8-2 wire clamp screws H x 0.8 W. Length Positions Stock No (46.58) 4 16H (5196) TRI-BARRIER UL Recognized, CSA Certified 4PCV SERIES VERTICAL MOUNT, 0.25 (8.26) CENTER SPACING 150V AWG wire clamp screws. 0.5H x 0.6 W (12.70 x 15.24). (8769) Length Positions Stock No. 4PCV (57.66) 8 1H DUAL BARRIER NC6 Series 4DB Series Dual Row NC6 SERIES SINGLE ROW, AWG, 20A, 00V Length Positions (in) Stock No NC6-P F NC6-P F NC6-P F NC6-P H NC6-P H DB SERIES SINGLE ROW, AWG, 20A, 150V 4DB-P F DB-P F DB-P C DB-P F DUAL ROW TERMINAL BLOCK, AWG, 25A, 000V J (89845) Find more at 909

2 BARRIER SNAPTRACK SOCKET MOUNTING TRACK SYSTEM Saves 0% Installation Time Saves 50% Wiring Time Fig. 1 Fig. 2 SPECIFICATION GUIDE FOR 140, 141, 142 SERIES SCREW TERMINAL BARRIER BLOCKS Open Bottom Screw Terminal Barrier Blocks Other size terminal blocks available; contact your Newark sales office for details. ELECTRICAL VACrms Without Marker Strip VACrms With Marker Strip Maximum Current Amps Maximum Watts per Terminal Maximum Wire Size Series # # # 10 DIMENSIONS Series W x H 0.875x0.406 (22.2x10.1) 1.125x0.50 (28.57x12.70) 1.1x0.625 (.5x15.88) Terminal Centers 0.75 (9.5) 0.48 (11.11) 0.56 (14.29) Mounting Centers 0.1 (7.94) (10.72) 0.50 (12.70) Screw Size #5-40 #6-2 #8-2 (540) Fig. SNAPTRACK is a nonconductive, rigid extruded PVC chassis for mounting socket assemblies and custom circuit boards. Mounts panels with rivets, screws or double-faced tape. PC boards snap-in from front and are held securely by integral ribs that absorb shock when PC board is flexed. SNAPTRACK allows convenient PC board removal for field servicing. Slots on 2 (50.8) centers for fast, easy installation. SNAPTRACK MOUNTING TRACK FIG. 1 (76.20) WIDE SOCKETS Length Stock No. TK2-6-AG 6 (152.40) 29F TK2-12-AG 12 (04.80) 29F TK2-24-AG 24 (609.60) 29F TK2-48-AG 48 (1.219M) 29F (69.85) WIDE SOCKETS 2TK2-6 6 (152.40) 29F TK (04.80) 29F TK (609.60) 29F TK (1.219M) 29F (82.60) WIDE SOCKETS TK (1.219M) 70B SPLIT APART 4TK (1.219M) 94F (101.60) WIDE SOCKETS 6TK2-6 6 (152.40) 48F TK (1.219M) 98F (55.6) WIDE SOCKETS 8TK (1.219M) 81F TK2D (1.219M) 04F SNAPTRACK MOUNTING TRACK FIG. 2 Panel mount or use with type TKAD SNAPTRACK rail adapter, ordered separately, to mount on DIN rails and A Series track. (76.20) WIDE SOCKETS Length Stock No. TK2D (1.219M) 04F (69.85) WIDE SOCKETS 2TK2D-6 6 (152.40) 04F TK2D (1.219M) 04F RAIL ADAPTER FOR SNAPTRACK FIG. Universal mounting foot that adapts SNAPTRACK to the symmetrical DIN rail, asymmetrical DIN rail and A Series rail. Description Stock No. TKAD Rail Adapter 50F (527) (94640) 140, 140-Y SERIES SCREW TERMINAL BARRIER BLOCKS 0.75 (9.5) Density Terminal Blocks Barriers Boost Electrical Ratings And Protect Against Frayed Wire Shorting 140 Series Have Binder Screws, 140-Y Series Have Y Terminals Installed See specifications guide on this page. Rated at 250V. Temperature range: 55 to +00 F. UL recognized. Order fanning strips and jumpers separately on page 911. Other sizes are available; go online or call. 140 SERIES BINDER SCREW TERMINALS FIT #16 WIRE Terminals Stock No F F F F F F F F F F F F F F F F F F Y SERIES Y TERMINALS FIT #16 WIRE Terminals Stock No Y 2 29F Y 4 29F Y 5 29F Y 6 29F Y 10 29F (541) 141 SERIES BINDER SCREW TERMINAL BARRIER BLOCKS Same Features As 140 Series Except 0.48 (11.12) Screw Terminal Density Fits #14 Wire See specifications guide on this page. Order jumpers and fanning strips separately on page 911. Other sizes are available; go online or call. Terminals Stock No F F F F

3 Find Datasheets & Tech Chat Online. 141 SERIES BINDER SCREW TERMINAL BARRIER BLOCKS (CONT.) Terminals Stock No F F F F F F F F F F F F (542) 142 SERIES BINDER SCREW TERMINAL BARRIER BLOCKS Same Features as 140 Series Except 0.56 (14.0) Screw Terminal Density Fits #10 Wire See specification guide on page 910. Order jumpers separately on this page. Terminals Stock No F F F F F F F F F F F F F (54) JUMPERS QUICK-CLAMP TERMINALS Brass Screws, Binder Head Type With Nickel Plating Tin-Plated Brass Terminals Accept 6-2x5/16 Screw; AWG SOLDER TERMINALS BARRIER Include two mating clamps and one screw. Sold in multiples of 5. For Barrier Block Series Stock No QC F (5471) LUG-TYPE TERMINAL STRIPS 54B 54C 56 56A 56C Cadmium-Plated Steel Lugs With Diameter Mounting Holes XPC Insulation Material, Rated UL94 HB 0.75 Density Color: chocolate brown. Sold in multiples of 5. Description Mounting Centers Stock No A 2 Lugs; 1 Ground 29F Lugs 28F A Lugs; 1 Ground 29F Lugs F Lugs F A 6 Lugs; 2 Ground F B 4 Lugs 29F C 5 Lugs; 1 Ground 29F Lugs F A 8 Lugs; 2 Ground F C 8 Lugs; 2 Ground F (5469) (5470) 51A For Barrier Block Series Stock No Y F Y F MARKER STRIPS 52 52A A 140J-1 Rugged Nickel-Plated Brass Sold in multiples of 5. For Barrier Block Series Stock No J F J F J F B F J-1* 142, F J-2 142, F * Connects two alternate terminals. (5472) (94645) Mfg. Part Nos. 141J, 95B 141J-1 142J-1 142J (0.78) Thick Bottom Mount (.18) White Numerals Used to identify terminal positions and insulate exposed portions of terminals from conductive mounting surfaces. Flame retardant material. UL recognized. NOTE: suffix in mfg. part no. indicates series number. 140, 141, 142 Series Terminals Stock No MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F Find more at 911

4 BARRIER MARKER STRIPS (CONT.) Terminals Stock No MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F MS F (548) PC SCREW TERMINAL CONNECTORS PC SCREW TERMINAL CONNECTORS (CONT.) METRIC SCREW (M x 6.5 LONG SCREW) Description Mounting Style Fig. Stock No Unassembled Vertical Snap-In 2 1C Captivated Assembled Vertical Snap-In 2 1C * Supplied with 10-2 x 8 long screw; Sold as each (9191) LOCKWASHER & SOLDER TERMINAL LUGS Fig. 1 Fig. 2 Fig. PC board mount. Insert into predrilled or punched holes. Antirotational feature ehances stability. Accept 14-22AWG solid/stranded wire. Rated 15A (0.81) thick tin-plate brass terminal with nickel-plated brass 6-2 binding head screw. Antiwicking design. For high-density packaging. Sold in packages of 100. Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 COLOR SELECTOR TABLE Standard screw is brass, nickel plate. For painted color head, add suffix as shown. Painted color head versions available; visit Newark.com. HEAD COLOR SUFFIX RED -2 BLACK - WHITE -4 BLUE -5 GREEN -6 YELLOW -7 NICKEL None SNAP-IN AND PC MOUNT Description Mounting Style Fig. Stock No Unassembled Horizontal Snap-In 1 95F Captivated Assembled Horizontal Snap-In 1 95F Unassembled Vertical Snap-In 2 95F Captivated Assembled Vertical Snap-In 2 95F Unassembled Horizontal PC Mount 50F Captivated Assembled Horizontal PC Mount 95F Unassembled Vertical PC Mount 4 94F Captivated Assembled Vertical PC Mount 4 95F Unassembled Extended Vertical PC Mount 5 1C Captivated Extended Assembled Vertical PC Mount 5 1C Unassembled 45 PC Mount 6 26C Captivated Assembled 45 PC Mount 6 1C LOW PROFILE Mounting Description Style Fig. Stock No Unassembled Vertical PC Mount 7 96B Captivated Assembled Vertical PC Mount 7 1C Captivated Assembled Vertical PC Mount 7 1C AMP Mounting Description Style Fig. Stock No Unassembled Vertical Snap-In 8 91B Captivated Assembled Vertical Snap-In 8 1C * Unassembled Vertical HD Snap-In 8 1C METRIC SCREW (M x 6.5 LONG SCREW) Mounting Description Style Fig. Stock No Unassembled Horizontal Snap-In 1 1C Captivated Assembled Horizontal Snap-In 1 1C Material: Brass Plating: Tin Sold in package of 100 LOCKWASHER TERMINAL LUGS Figure H DIM Mounting Hole Diameter Stud Size Stock No. 90 A #4 94F A #6 97H A #8 94F B #4 94F B #6 97H C #2 94F D #6 97H D #8 97H F #4 97H F #8 97H G #6 97H G #8 97H H #4 94F H #6 97H H #8 97H SOLDER TERMINAL LUGS 4004 E F I #4 94F I #6 97H I #8 97H J #4 97H J #6 94F J #8 97H K #8 97H TERMINALS LUGS A DIM Mounting Hole Diameter Hole Diameter Material Thickness Stock No H H (786) (94656) 912

5 You Need. We Speed. Order Today. DOUBLE ROW, FLAT MOUNT THERMOSET 600 Series 671 Series 60 Series Molded general-purpose phenolic material. UL recognized, CSA certified. 410 SERIES MINIATURE 1 4 CENTERS, 00V Class B, 5A, AWG Terminals Length Stock No. 410-GP F GP F GP F GP F GP F GP F GP F GP F GP F SERIES 5-40 SCREWS 8 CENTERS, 00V CLASS C, 15A, AWG Terminals Length Stock No. 600-GP F GP F GP F GP F GP F GP F GP F GP F GP F A SERIES 6-2 SCREWS 8 CENTERS, 00V CLASS C, 15A, AWG Terminals Length Stock No. 600A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F SERIES 7 16 CENTERS, 00V CLASS C, 20A, AWG Terminals Length Stock No. 601-GP F GP F GP F GP F GP F GP F GP F GP F GP F GP F GP F GP F SERIES 9 16 CENTERS, 00V CLASS C, 0A, AWG Terminals Length Stock No. 602-GP F GP F GP C GP F GP F GP F GP F GP F GP F GP F BARRIER DOUBLE ROW, FLAT MOUNT THERMOSET (CONT.) 60 SERIES HEAVY-DUTY CENTERS, 600V CLASS C, 50A, AWG Terminals Length Stock No. 60-GP F GP F GP F GP F GP F SERIES HEAVY-DUTY 7 8 CENTERS, 600V CLASS C, 70A, 4-12 AWG Terminals Length Stock No. 604-GP F GP F GP F GP F GP F SERIES HEAVY-DUTY CENTERS, 600V CLASS C, 90A, 2-12 AWG Terminals Length Stock No. 605-GP F GP F GP F A SERIES CLOSED BACK 8 CENTERS, 150V CLASS C, 15A, AWG Terminals Length Stock No. 670A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F A-GP F SERIES CLOSED BACK 7 16 CENTERS, 00V CLASS C, 20A, AWG Terminals Length Stock No. 671-GP F GP F GP F GP F GP F GP F GP F GP F GP F SERIES CLOSED BACK 9 16 CENTERS, 600V CLASS C, 0A, AWG Terminals Length Stock No. 672-GP F GP F GP F GP F GP F GP F GP F GP F A RZ SERIES THERMOPLASTIC CLOSED BACK 8 CENTERS, 00 VOLTS, 20A, AWG Tough, flame-retardant thermoplastic. Terminals Length Stock No. 670A-RZ F A-RZ F A-RZ F (528) (94650) Find more at 91

6 BARRIER 621 RZ SERIES THERMOPLASTIC HEAVY-DUTY Molded material is thermoplastic, 110C. 600V, closed-end design centers. Wire range with wire binding screw amps, with sems pressure screw stranded copper wire only 20 amps. (2986) Length Stock No. 621 RZ F RZ F RZ F RZ F RZ F SINGLE ROW, FLAT AND FEED-THRU MOUNT UL recognized, CSA certified. NOTE: Suffix in mfg. part nos. denote number of terminals. FLAT MOUNT 411-GP SERIES (6.5) CENTERS, 00V CLASS B, 5 AMP, AWG Length Stock No. 411-GP F GP F GP F GP SERIES 0.75 (9.5) CENTERS, 150V CLASS C, 15 AMP, AWG 599-GP F GP F GP F GP F GP F GP F GP F GP F GP SERIES 0.48 (11.1) CENTERS, 150V CLASS C, 20 AMP, AWG 699-GP F GP F GP F GP F GP F (5256) 1100, 1200 Series, 110P 1500 Series,1612STD General-Purpose Phenolic Molded Base, Rated 150 C UL Recognized File No. E62806, CSA Certified File No. LR19766, ISO9001:2000 Certified 1100, 110P and 1200 series are deadfront style series are barrier style, available in 4 types denoted by suffix in mfg. part nos.: STD = standard connector; DJ = removable connector with brass insert; ST = 10-2 stud; and SC = short circuiting bar with brass insert, 4 shorting pins per block. 110P (4-14 AWG), 1200 (4-18 AWG) SERIES 600 VOLTS, 70 AMPS Terminals Length Stock No P F F F SERIES 600 VOLTS, 65 AMPS, 6-18 AWG Terminals Length Stock No F F F F F SERIES 600 VOLTS, AWG, (15.88) LINE-TO-LINE SPACING, APPROVED FOR 75 AMPS WITH PROPER TERMINATION Terminals Length Stock No STD F STD F STD F STD F DJSV F ST F ST F SC F SC F STD F (545) POWER DISTRIBUTION AND SPLICER BLOCKS J TYPE JUMPERS For single and double row flat mount thermoset terminal blocks. Fig AWG Fig AWG Fig. 2/0-14 AWG Fig AWG Fig AWG Fig. 6 2/0-14 AWG (5285) (5259) Center Dimension Stock No J F J F J B J F RJS F RJS- 8 94F RJS B J F GROUNDING LUGS Tin-plated, high-conductive aluminum. UL recognized, CSA certified. AWG Stock No GL F GL20 2/ F GL5 50MCM-6 52F Fig MCM- 6 AWG Fig AWG Fig AWG Fig x 9 16 Stud Fig x 1 16 Stud 600 Volt, 1 Line, 1 Load Opening Per Pole, Except All Power Distribution Blocks High-Conduction Tin-Plated Connectors UL Recognized, CSA Certified, ISO9001:2000 Certified 141 series power distribution and splicer blocks feature small size, high-impact thermoplastic, rated at 125 C. May be ganged together to form various line lengths. All other types are general-purpose phenolic, rated at 150 C. POWER DISTRIBUTION BLOCKS, 600 VOLT FIG. 1 Connector Amps/ Line Load Poles Pole Stock No * Fig. 1 Fig F * Fig. 1 Fig F * Fig. 1 Fig F * Fig. 1 Fig F * Fig. Fig F * Fig. Fig F * Fig. Fig F Fig. Fig F Fig. Fig F Fig. 6 Fig F Fig. 7 Fig F Fig. 7 Fig F

7 No Minimum Order Fees POWER DISTRIBUTION AND SPLICER BLOCKS (CONT.) POWER BLOCKS (SPLICER), 600 VOLT FIG. 2 Connector Amps/ Line Load Poles Pole Stock No * Fig. 1 Fig F * Fig. 1 Fig F * Fig. 1 Fig F * Fig. 1 Fig F * Fig. 1 Fig F * Fig. Fig F * Fig. Fig F POWER STUD BLOCKS, 600 VOLT FIG. Connector Line Load Poles Amps/ Pole Stock No Fig. 10 Fig F Fig. 11 Fig F *CE compliant EN (5510) 66 SERIES PC BOARD TRI-BARRIER TERMINAL STRIPS High-Temperature Thermoplastic Housing, Rated UL94V-0 Wire Range: 8-18 AWG 66 series PC board mount 600V, 45A terminal strips deliver on board power yet run cool. Provide an economical alternative to bus bars or rail mount terminal blocks. Tri-barrier construction eliminiates over insertion of terminated wires and prevents accidental shorting of PC board components. Tin/lead-plated copper brass terminals. Zinc chromate-plated steel M4 screws with clamp washers. Dielectric withstanding voltage: 12000VDC. UL recognized, CSA certified. No. of Poles Dim. A Stock No K K K K B K K K (48995) 9.5mm AND 11.1mm HIGH-BARRIER SINGLE- ROW TERMINAL STRIPS Fig. 2 Fig. 1 Fig. Fig Series: 25 00V, 0.75 (9.5) Centers 6 Series: V, 0.79 (20.1) Centers Barrier strips are UL94V-0 glass-filled flexible thermoplastic. Choose from 4 terminal styles: printed circuit bottom-side, insulated solder turret bottom-side, no printed circuit terminals, and insulated quick-connect. Terminals are welded, resulting in no solder joint fatigue caused by twisting the tails. Terminals are tin-lead plated brass with 6-2 x 1 4 phillips/slotted screws (16.8)H x 0.6 (16.0)W. UL recognized, CSA certified SERIES PRINTED CIRCUIT BOTTOM TERMINALS FIG. 1 Terminals Stock No F K K K K K K F K K SERIES INSULATED SOLDER TURRET TERMINALS FIG. 2 Terminals Stock No F K K K F SERIES 0.75 (9.5) 20A BARRIER TERMINAL STRIPS (94668) BARRIER 9.5mm AND 11.1mm HIGH-BARRIER SINGLE-ROW TERMINAL STRIPS (CONT.) SERIES INSULATED SOLDER TURRET TERMINALS FIG. 2 Terminals Stock No K K K K K SERIES NO PRINTED CIRCUIT BOTTOM TERMINALS FIG. Terminals Stock No K K K K K F SERIES INSULATED QUICK-CONNECT TERMINALS FIG B K K SERIES PRINTED CIRCUIT BOTTOM TERMINALS FIG K M K F M K M (5225) Glass-Filled Thermoplastic Housing, Rated UL94V-0 Wire Size: 12 to 24 AWG Double row, closed-back high barrier strips with 0.75 (9.5) terminal centers. 110 C temperature index. Zinc-chromateplated steel no. 6-2 x (6.5) phillips/slotted screws (22.4) wide x 0.6 (16) high. Voltage rating: UL recognized 00Vrms Class B, 150Vrms class C; CSA certified 20A. Withstanding voltage: 10,500Vrms. Terminals Length Stock No (5.8) 7K (45.2) 72K (54.9) 72K (64.) 72K (7.9) 72K (8.) 0B (9.1) 72K (112) 72K (11) 14F (150) 72K (169) 72K (188) 72K (207) 72K (226) 7K (245) 72K (0) 72K (518) Find more at 915

8 BARRIER 77 SERIES 0.75 (9.5) 20A BARRIER TERMINAL STRIPS 18 SERIES 0.48 (11.1) 20A BARRIER TERMINAL STRIPS (CONT.) Terminals Length in. (mm) Stock No (8.4) 72K (77847) Same as 76 series strips except low-barrier design. CSA certified 20A; and withstanding voltage: 7500Vrms (22.4) wide x 0.44 (11.2) high (9.5) terminal centers. Terminals Length (mm) Stock No (5.8) 14F (45.2) 72K (54.9) 72K (64.) 14F (7.9) 72K (8.) 72K (9.1) 72K (112) 72K (11) 14F (140) 72K (150) 72K (169) 14F (188) 72K (207) 14F (226) 14F (245) 72K (0) 72K (5184) 78 SERIES 0.48 (11.1) 20A BARRIER TERMINAL STRIPS Glass-Filled Thermoplastic Housing, Rated UL94V-0 Wire Size: 14 AWG Max. Double-row, closed-back strips with 0.48 (11.1) terminal centers. 110 C temperature index. Zinc-chromate-plated steel no. 6-2 x (6.5) phillips/slotted screws. Size: 1.1 (28.7) wide x 0.55 (14.2) high. Voltage rating: UL recognized 250Vrms Class B, 00V Class C; CSA certified 20A. Withstanding voltage: 7500Vrms. Terminals Length (mm) Stock No (41.4) 72K (52.) 94F (6.5) 72K (74.7) 72K (85.9) 72K (96.8) 72K (108) 14F (10) 72K (152) 72K (175) 72K (197) 72K (219) 72K (241) 72K (286) 72K (5185) 18 SERIES 0.48 (11.1) 20A BARRIER TERMINAL STRIPS 21 SERIES 0.56 (14.) 0A BARRIER TERMINAL STRIPS General-Purpose Phenolic Housing Wire Size: 10 to 18 AWG Closed/Open-bottom strips with 0.56 (14.) centers. Zinc-chromate-plated steel no. 8-2 x 0.1 (7.94) phillips/ slotted screws. 1.1 (.) wide x 0.6 (16) high. UL recognized 00Vrms class B and C; CSA certified 0A. 8211: Closed-Bottom Strips Terminals Length (mm) Stock No (5.9) 72K (67.6) 72K (81.8) 72K (96) 72K (110) 14F (125) 88F (19) 72K (167) 72K (196) 72K (110) 72K : Open-Bottom Strips (67.6) 72K (81.8) 7H (96) 72K (110) 84F (125) 72K (19) 80K (19) 80K (167) 72K (10) 29B (68) 7K (5186) 28 SERIES (17.5) 50A BARRIER TERMINAL STRIPS Open back and feed thru strips with (17.5) centers. General-purpose phenolic insulator with UL temperature index 150 C. Nickel-plated brass no x 0.75 (9.5) phillips/slotted screws. Wire size: no. 6 lugged (46) wide x 0.75 (19.1) high. UL recognized 00Vrms Class B and C; CSA certified 50A. Withstanding voltage: 10,500Vrms. Terminals Length (mm) Stock No (6.5) 72K (81) 72K (98.4) 72K (116) 72K (168) 72K (20) 72K (28) 72K (5187) Dielectric Withstanding Voltage: 10,500Vrms Temperature Rating: 150 C max. General-Purpose Phenolic Housing Wire Size: 12 to 22 AWG Dielectric Withstanding Voltage: 7500 VDC Temperature Rating: 150 C max. Open-back strips with 0.48 (11.1) centers. Screws #6-2 phillips/slotted, steel, zinc chromate plate. Terminals are brass, nickel plated. UL recognized 20A class B and C. CSA certified 20A. 916

9 See More Online From 440+ Top Brands. BARRIER DIN RAIL MOLEX TERMINAL BLOCK JUMPERS DIN RAILS AND MOUNTING ACCESSORIES SPC10578 SPC10577 Fig.1 Fig.2 Fig. Fig.4 Nickel-Plated Brass Sold in multiples of 10. Fig.5 Fig.6 For Terminal Block Series Figure Number Stock No B ,76, B B K B ,14,24,71,72,75,76, K ,7, B K H (77852) 52 SERIES FILTERED The 52 series of filtered terminal blocks have been developed for DC power filtering applications. Working voltage: 100VDC. Operating temperature range: 55 C to +105 C. Capacitance: 2,500pF + 100% 0%. Current rating: 20A. Mininum Ins. 100MHz: 60. UL 1059 recognized and CSA certified. For latest mechanical details, go online or call. Terminal Block Position Stock No F A 2 78K A 95F A 4 95F A 6 95F (7448) NEMA 900 SERIES 900 series medium duty, gray surface, 0.75 pitch. Voltage rating: 600 V max. Current rating: 50 A max. Housing: Polyester, UL 94V-0 rated. Mount Type Wire Termination Wire Size (AWG) Stock No Dovetail Base Channel... 07J Flat Base Direct... 11H Flat Base Direct H Dovetail Base Channel H Flat Base Direct H Dovetail Base Channel J Flat Base Direct H Channel Mount Plug-In J Dovetail Base Channel J Dovetail Base Channel J Flat Base Direct H20.8 END SECTIONS Mount Type Stock No Dovetail Base 8C Flat Base 89C (797) SPC10575 End Clip Slotted versions have a 25mm slot length x 5.mm width and measure 6mm between slot centers. Rails are constructed of zinc chromate plated steel. The end clip fits on the end of the DIN rail. CE compliant. Description Stock No. SPC mm x 7.5mm Slotted, 2m 19C SPC mm x 7.5mm Slotted, 1m 19C SPC mm x 7.5mm Solid, 2m 19C SPC mm x 15mm Slotted, 2m 19C mm x 7.29 mm Slotted, 1m 92N SMS-RC Rail Spacer 46N SMS-EC End Clip 46N (66776) SERIES AB1 IEC TERMINAL BLOCKS WITH BOX LUGS AB1TP65U The AB1VV series terminal blocks allow the color coding of circuits in the control panel. Mount on DIN 1 and 5mm DIN track. Feature 4-sided wire entry with reliable box lug termination. UL recognized, CSA certified, CE compliant, VDE approved. TERMINAL BLOCK 600V - 20A, WIDTH: 5mm Color Stock No. Each AB1VV25U Gray 08C AB1VV25UBL Blue 18C AB1VV25UGE Orange 18C V - 0A, WIDTH: 6mm Color Stock No. Each AB1VV45U Gray 15B AB1VV45UBL Blue 18C AB1VV45UBLA White 18C AB1VV45UGE Orange 18C AB1VV45UNO Black 18C AB1VV45URO Red 18M AB1VV45UVE Green 18M V - 50A, WIDTH: 8mm Color Stock No. Each AB1VV65U Gray 18M AB1VV65UBL Blue 18C AB1VV65UGE Orange 18C GROUNDING BLOCK 600V Current (A) Stock No. Each AB1TP45U 20 18C AB1TP65U 0 18M ACCESSORIES Description Stock No. Each AB1AC2 Ivory, End Barrier 18C AB1AC24 Gray, End Barrier 15B AB1AC24BL Blue, End Barrier 18C Find more at 917

10 DIN RAIL SERIES AB1 IEC WITH BOX LUGS (CONT.) ACCESSORIES Color Stock No. Each AB1AC24GE Orange, End Barrier 18C AB1AC6 Gray, End Barrier, 50A 08C (6271) ACCESSORIES FOR AB1 SERIES BOX LUG For use with 8mm wide blocks. Constructed of nylon 6-6 with black numbers on a white background. POLE JUMPERS Poles For Block Width Stock No. Each AB1ALN mm 08C AB1ALN22 2 5mm 18M AB1ALN mm 18M AB1ALN42 2 6mm 18C AB1ALN mm 08C AB1ALN62 2 8mm 18C PARTITIONS Color: gray. Current (A) Stock No. Each AB1AS24 20/0 18C AB1AS C MARKERS Marked Stock No. Each AB1B C AB1B C AB1B C AB1B C AB1B C AB1B C AB1B B AB1B C AB1B B (6274) TERMINAL BLOCK ACCESSORIES (CONT.) Marked Stock No. Each AB1B B AB1B B (6mm) MARKERS Marked Stock No. Each AB1B B AB1B B AB1B B AB1B B AB1B B AB1B C AB1B6L1 L1 18C AB1B6L2 L2 18C AB1B6L L 18C x 0. (4.5 x 8.mm) MARKERS Sold individually. Marked Stock No. Each AB1RT Ground Symbol 18C AB1SA1 Blank 18M JUMPERS AND END CLAMPS Description Stock No. Each AB1RRAL22 2-pole Jumper, 5mm Spacing 18C AB1RRAL2 -pole Jumper, 5mm Spacing 18C AB1RRAL24 4-pole Jumper, 5mm Spacing 18C AB1RRAL42 2-pole Jumper, 6mm Spacing 18C AB1RRAL4 -pole Jumper, 6mm Spacing 18C AB1RRAL44 4-pole Jumper, 6mm Spacing 18M AB1AB8P5 End Clamp for 5mm DIN -Track 15B (59481) G SERIES NEMA TYPE AND END BARRIERS SERIES AB1 IEC WITH FUSED DISCONNECT 9080GR6 9080GK6 9080GM6 The AB1FUSE series for 5x20mm or 5x25mm fuse (not included). 8mm wide. Maximum current: 15A AWG wire. Grey. UL recognized, CSA certified, CE compliant, NEMKO, SEV approved. Description Stock No. Each AB1FUSE45U5X Standard 08C AB1FUSE45U5XJ With LED 5-12V 18C AB1FUSE45U5XB With LED 12-24V 08C AB1FUSE45U5XM With Neon V 18M (627) TERMINAL BLOCK ACCESSORIES Made of nylon 6-6. Black numbers on white background. Sold in strips of 10 identical markers (5mm) MARKERS Marked Stock No. Each AB1B C AB1B B AB1B B AB1B B GA6 9080GF6 Each section of G series terminal blocks requires one end barrier, ordered separately below. Terminals and end barriers have molded nylon construction with 125 C maximum service temperature. All blocks mount on mfg. part no. 9080GH and 5mm DIN channel except mfg. part no. 9080GK6 which mounts on mfg. part no. 9080GH channel or mounts directly. Maximum voltage: 600V. Mfg. part no. 9080GF6 features fuse block with beryllium-copper clips and wrap-around fuse puller.gr, GK and GM available in assorted colors. UL recognized, CSA certified. Order mounting channel, jumpers and marking accessories on page 919. Max. Current Description Stock No. 9080GR6 60A Solderless box lug, 22 to 50F AWG, natural 9080GK6 40A Solderless box lug, 22 to 50F AWG, natural for direct or channel mounting 9080GM6 0A Mini solderless box lug, 22 to 9F AWG (600V), natural 9080GMB6 0A Mini solderless box lug, 22 to 97F AWG (600V), black 9080GMG6 0A Mini solderless box lug, 22 to 10AWG (600V), green 97F

11 Find Datasheets & Tech Chat Online. G SERIES NEMA TYPE AND END BARRIERS (CONT.) Max. Current Description Stock No. 9080GA6 40A Flat terminal, 22 to 12AWG, 50F x 5/16 screws 9080GF6 0A Fuse block for 1/2 dia. x 1 1/2 20J ferrule fuse, 18 to 10AWG (fuse not included); pkg. of 10 G SERIES END BARRIERS Max. Current Description Stock No. Each 9080GK6B Fits type 9080GK series 50F GM6B Fits type 9080GM and GR series 96F GP6B Fits type 9080GA6, GP6 50F GF6B Fits type 9080GF6, GG6, GS6 50F (5257) G SERIES TERMINAL BLOCKS WITH CIRCUIT BREAKERS Channel-mount circuit breakers feature solderless box lug connections. UL/CSA rated: 250VAC/65VDC; except mfg. part nos. 9080GCB100/GCB150: 125VAC/65VDC. 1mm width DIN-VDE rated: mm 2 solid wire /0.5-6mm 2 stranded 250VAC 65VDC, 1mm width (0.512 ). 24 sections per foot. Comes with track adapter. Circuit breakers are also compatible with 5mm DIN rails. UL recognized, CSA certified, VDE approved. (5289) (5290) Amps Stock No. Each GCB F GCB F GCB F GCB0.0 50F GCB F GCB F GCB F ACCESSORIES FOR G SERIES Mounting Channel 9080GCB 6-Pole Jumper Description Stock No. 9080GH26 Snap-off mounting channel, 50F (914.4) in length 9080GH710 6-pole jumper for GM6 97F GH7 6-pole jumper for 9080GK6, 50F GR6 9080GH60 Marking strip end plug for 9080GK6, 50F GR6, GM6, GA6, GP6 9080GH10 Screw-on end clamp 9F GH11 Slip-in end clamp 9F TOPJOB TOPJOB DIN-rail mount terminal blocks feature CAGE CLAMP technology that allows insertion, by hand, of a stripped conductor (solid or ferruled stranded) as well as screwdriver actuated wire insertion and removal of all conductor types. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. DIN RAIL TOPJOB (CONT.) SINGLE LEVEL, GRAY Wire Size Poles (AWG) Rating Stock No V/15A 28K V/15A 28K V/15A 28K V/20A 28K V/20A 28K V/20A 28K V/0A 28K V/0A 28K V/0A 28K V/55A 28K V/55A 28K GROUND, GREEN/YELLOW Poles AWG Stock No K K K K K K K K K ANGLED FRONT ENTRY Rating Poles AWG (A) Stock No V/24A 9M V/24A 7K LEVEL Rating Description AWG (A) Stock No Through/through V/20A 28K Ground/through V/15A 28K Conductor, All Common V/15A 28K Ground/ground K LEVEL Rating Description AWG (A) Stock No Through/through/through V/15A 28K Conductor, All Common V/15A 28K Gnd/through/through V/15A 28K Gnd/gnd/gnd; 6 conductors K TERMINAL BLOCK END PLATES, ORANGE Description Stock No Fits and K Fits and K Fits and K Fits 2002 Double Deck 28K Fits 2002 Triple Deck 28K Fits 2002 Angled Fron Entry 9M INSULATED JUMPERS, PUSH-IN, LIGHT GRAY Description Rating (A) Stock No way 15 28K way 15 28K way 20 28K way 20 28K way 0 28K way 0 28K way 55 28K way 55 28K ACCESSORIES Description Stock No White Marking Strip Roll, 50M 28K White Marking Strip Roll, 00M 28K Screwdriver, 2.5 x 0.4mm 28K Screwdriver,.5 x 0.5mm 28K Screwdriver, 5.5 x 0.8mm 28K (84751) Find more at 919

12 DIN RAIL 280 SERIES DIN RAIL DIN-rail mount terminal blocks feature CAGE CLAMP spring pressure wiring technology that operates by inserting a screwdriver, inserting a stripped conductor (solid or stranded) and removing the screwdriver. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. SINGLE-LEVEL FRONT ENTRY, GRAY Wire Size Poles (AWG) Rating Stock No /RN V/20A 79K /RN V/20A 79K /RN V/20A 79K /RN V/20A 79K /RN V/20A 79K /RN V/20A 79K /RN V/0A 79K /RN V/20A 79K /RN V/65A 79K /RN V/65A 79K /RN V/115A 79K V/200A 28K GROUND, GREEN/YELLOW /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K END PLATES, 2.5mm WIDE, ORANGE Description Stock No End Plate for 280, 2-Conductor Blocks 28K End Plate for 280, -Conductor Blocks 28K End Plate for 280, 4-Conductor Blocks 28K End Plate for 281, 2-Conductor Blocks 28K End Plate for 281, -Conductor Blocks 28K End Plate for 281, 4-Conductor Blocks 28K End Plate for 28, 2-Conductor Blocks 28K End Plate for 282, -Conductor Blocks 28K End Plate for 28, 2-Conductor Blocks 28K End Plate for 28, -Conductor Blocks 28K End Stop, Gray 28K INSULATED ADJACENT 2-POLE PUSH-IN JUMPERS Rating Description (A) Stock No /RN Jumper for 280 Series 20 79K /RN Jumper for 281 Series 20 79K /RN Jumper for 282 Series 0 79K /RN Jumper for 28 Series 65 79K Jumper for Series 85 28K Jumper for Series K ACCESSORIES Description Stock No DIN Rail, Slotted, 5x7.5mm (2M) 28K DIN Rail, Unslotted, 5x7.5mm (2M) 28K Screwdriver, 2.5 x 0.4mm 28K Screwdriver,.5 x 0.5mm 28K Screwdriver, 5.5 x 0.8mm 28K Set of Screwdrivers ( , -620, -621) 28K (84690) 280 SERIES CAGE CLAMP FUSE AND DISCONNECT Fig. 1 Fig. 2 DIN-rail mount fuse/disconnect terminal blocks feature CAGE CLAMP spring pressure wiring technology that operates by inserting a screwdriver, inserting a stripped conductor (solid or stranded) and removing the screwdriver. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. Thermal circuit breakers available on page 129 DISCONNECT/TEST, GRAY (Fig. 1) Poles Wire Size (AWG) Rating Stock No /RN V/0A 79K /RN V/0A 79K V/0A 28K FUSE (Fig. 2) Price Rating Stock Each Description AWG (A) No /RN x 20mm Fused V/10A 79K Disconnect / x 20mm LED Fuse V/10A 04M Indication, 15-0VDC / /RN x 20mm, Neon V/10A 79K Fuse Indication, 10VAC /RN /4 x 1-1/4 Fuse V/10A 79K Disconnect / /4x1-1/4 LED V/10A 04M Fuse Indication, 15-0VDC / /RN /4x1-1/4 Neon V/10A 79K Fuse Indication, 110VAC /RN Fuse Terminal Block V/0A 79K for Blade-Type Automotive Fuse /281 Fuse Terminal Block V/0A 29K for Mini-Automotive Blade-Type Fuse END PLATES, ORANGE Description Stock No End Plate for K End Plate for K End Plate for 281 Blocks 28K End Plate for 282 Blocks 28K (84749) (9465) 920

13 You Need. We Speed. Order Today. SAK SERIES SCREW CLAMP TERMINAL BLOCKS FOR TS 2 DIN-RAIL Expanded marking options; ideal for use with PLC circuitry. Vibrationproof clamping system made from corrosion-resistant, zinc-plated steel. Polyamide thermoplastic molding combines UL94V-2 rating with an operating temperature range to 22 F. UL recognized, CSA certified, VDE approved. Order terminal block accessories separately on page 922. FEED-THRU Description Stock No * SAKD2.5N, AWG, 00V/20A 16F SAK2.5, AWG, 600V/20A 17M SAK4, AWG, 600V/0A 2M SAK6N, 22-8 AWG, 600V/40A 16F FUSE ASK1, AWG, 00V/10A 17M KDKS1, AWG, 00V/10/20A 99F GROUND EK 4, AWG 42M EK 10, 14-6 AWG 17M *5mm wide; +6mm wide or higher (5269) W SERIES SCREW CLAMP AND ACCESSORIES FOR TS 5 DIN-RAIL Reduces Installation Time By 40% DIN RAIL W SERIES SCREW CLAMP AND ACCESSORIES FOR TS 5 DIN-RAIL (CONT.) Pluggable Jumpers High-density: 0.2 per block for 12 AWG. Jumpers and other current-carrying components are completely insulated for touch-safe operation. Vibrationproof clamping system made from corrosion-resistant zinc-plated steel. Wemid thermoplastic moldings combine temperature range of up to 250 F with the resilience of nylon. UL recognized, CSA certified, VDE approved. ACCESSORIES FEED-THRU Price W x L x H Configuration Wire Vol- Each Description (Inches) Size tage Stock No WDU 2.5N 0.20 x 1.7 x 1.48 Single M WDU x 2.6 x 1.85 Single M WDK 2.5N 0.20 x 1.7 x 1.48 Single M WDU x 2.6 x 1.85 Single F WDU x 2.6 x 1.85 Single M WDU x 2.6 x 1.85 Single M WDU x 2.6 x 2.48 Single M WDU 2.5N 0.20 x 1.7 x 1.48 Single M WDU 1.5/R x 0.96 x 0.98 Single C WDK 2.5 DU-PE 0.20 x 2.72 x 2.48 Single & F Ground WDK x 2.72 x 2.48 Dual F WDK 2.5 (with 0.20 x 2.72 x 2.48 Dual C ZQV Jumpers) WDK 4N 0.24 x 2.6 x 2.52 Dual C WDU 1.5/R x 2.72 x 2.48 Dual C WDK 1.5/R x 1.8 x 1.52 Dual C WDK 2.5 NV 0.20 x 2.6 x 2.44 Branch H WDK 4NV 0.24 x 2.6 x 2.52 Branch M FUSE WSI x 2.6 x 2.6 Single F WSI 6 LED 0.1 x 2.6 x 2.76 Single F WSI 6 LED 0.1 x 2.6 x 2.76 Single F (with BFI) WSI 6/ x 2.6 x 2.64 Single F WSI 6/2 LED 0.47 x 2.6 x.11 Single F USI x.09 x 2.41 Single C KDKS x 2.89 x 2.19 Feed, F Single DISCONNECT, FUSE INDICATION WTR x 2.6 x 1.9 Lever M WTR x 2.6 x 1.9 Lever F GROUND Description W x L x H (Inches) Configuration Wire Size Voltage Stock No. Price Each WDK 2.5N 0.20 x 2.6 x 2.44 Single & M DU-PE Ground WPE x 2.6 x 1.85 Single M WPE 2.5N 0.20 x 2.1 x 1.48 Single F WPE x 2.6 x 1.85 Single M WPE x 2.6 x 1.85 Single F WPE x 2.6 x 1.85 Single M WPE x 2.6 x 2.48 Single F Description Function Used with Stock No. Price Each WEW 5/1 End WDU 2.5N,WDU 2.5, 10B Bracket WDU4,WDU6,WDU EW 15 WDU 1.5/R.5,WDK 1.5/T.5 94F WAP WDU 1.5 WDU 2.5N 66F End WAP WDU 1.5/R.5 Plates WDU 1.5/R.5,WDK 1.5/T.5 14C WAP WDK 1.5/R.5 WDK 1.5/R.5 14C WQV 6/10 WDU 6 66F WQV 6/2 WDU 6 10B WQV 10/10 WDU 10 66F WQV 10/2 WDU 10 10B Jumper WQV 16/2 Links WDU 16 1C WQV 16/10 WDU 16 1C WQV 6/ WDU 6 10B WQV 6/4 WDU 6 10B WQV 10/4 WDU 10 10B ZQV 2.5N/2 WDU 2.5N 10B ZQV 2.5N/ WDU 2.5N 10B ZQV 1.5/R.5/2 GE WDU 1.5/R.5,WDK 1.5/T.5 14C ZQV 1.5/R.5/ GE WDU 1.5/R.5,WDK 1.5/T.5 14C Jumpers ZQV 4N/2 WDK 4N,WDK 4NV 4C ZQV 4N/10 WDK 4N,WDK 4NV 28C ZQV 4N/4 WDK 4N,WDK 4NV 28C ZQV 4N/ WDK 4N,WDK 4NV 4C WTW Partition WDK 2.5N,WDK 2.5 DU-PE, WDK 4N,WDK 4NV,WDK 2.5NV 66F (5267) Z SERIES TENSION CLAMP TERMINAL BLOCKS FOR TS5 DIN-RAIL ZDU 1.5 Feed-Thru Terminal Block ZSI 2.5 Fuse Terminal Block ZDU 2.5 Feed-Thru Terminal Block ZPE 4 Ground Terminal Block ZDU 6 Feed-Thru Terminal Block Vibrationproof clamping system made from corrosion-resistant stainless steel. Current-carrying components, including jumpers, are completely insulated for touch-safe use. High-density: 0.2 per block for 12 AWG. Ideal for use with PLC circuitry. Wemid thermoplastic moldings, rated UL94V-0, combined with the resilience of nylon. Operating temperature range: up to 250 F. UL listed, CSA certified, VDE approved. Order terminal block accessories separately on page 922. FEED-THRU Description AWG Rating Stock No * ZDU 1.5** V/10A 2M ZDU V/25A 2M * ZDU V/A 2M * ZDU V/8A 2M ZDU 2.5/AN V/25A 16F ZDK 2.5/ V/20A 2M Find more at 921

14 DIN RAIL Z SERIES TENSION CLAMP FOR TS5 DIN-RAIL (CONT.) SINGLE-LEVEL 5x20 FUSE AWG Description Fuse Indicator Stock No ZSI F ZSI 2.5 LED 40-60VDC/80-120VAC 16F GROUND Description AWG Stock No * ZPE 1.5** C ZPE M * ZPE M * ZPE F ZPE 2.5/AN M ZPE 2.5/4AN M *Single-level; **Use.5mm tags for ZDU 1.5 terminals; +Dual-level; -Clamp branch; 4-Clamp branch END COVERS Use with Block Stock No ZDU/ZPE F ZDU/ZPE 4 16F ZDU/ZPE 6 16F ZDU 2.5/AN, ZPE 2.5/AN, ZTR 2.5D 16F ZDU 2.5/4AN, ZSI 2.5, ZSI 2.5 LED, ZTR 2.5/AN, 16F ZPE 2.5/4AN ZDK 2.5/1.5 16F PLUGGABLE JUMPERS Use with Block Poles Stock No ZDU B ZDU B ZDU/ZTR/ZDK B ZDU/ZTR/ZDK B (5272) THERMOCOUPLE FEED-THRU TERMINAL BLOCK AND END PLATE For TS 5 DIN rail mounting. Thermocouple (TC) terminal blocks are designed for use in temperature measurement circuits. To provide TC wiring continuity, current bars of terminal are made of same dissimilar metal of TC wire, which increases accuracy of signal. UL listed, CSA certified, VDE approved. Thermocouple WDU Description Stock No mm Wide Block WDU 2.5 TC, Type K CH/AL, AWG 42M End Plate WAP/WDU F (69169) DEKAFIX MARKING TAGS (CONT.) CONSECUTIVE VERTICAL INCREMENTS OF 10 Pre-Printed Numbers Width (mm) Stock No to H to H to H (527) SCREWDRIVERS FOR TERMINAL BLOCK INSTALLATION Ergonomically designed, blade-tip screwdrivers for use with Weidmüller terminal blocks. A complete line of tools is available; go online or call. Description Stock No For WDU 1.5, 0.5 x.0 mm Blade-Tip 17M For WDU 2.5, 4 Blade-Tip to 0.6 x.0mm 92B For WDU 6 Blade-Tip to 0.8 x 4.0mm 97B For WDU 10, 16, 5 Blade-Tip to 1.0 x 5.5mm 94B (5268) MOUNTING RAILS, END BRACKETS AND END PLATES Description Stock No TS 5 x 7.5mm Steel Slotted Rail 17M TS 5 x 7.5mm Steel Solid DIN Rail 99F TS 2 x 15mm Steel Solid Rail 90F EW 5 End Bracket for TS 5 16F EWK 1 End Bracket for TS 2 90F WEW 5/2, End Bracket TS 5 90F ZEW 5, End Bracket TS 5 11B WAP End Plate 9F WAP 16-5 End Plate 90F (5244) WKF SERIES DIN RAIL MOUNT IEC SPRING CLAMP WKF series features spring clamp (screwless) technology, 5mm DIN rail mounting, vibration-resistant clamp, touch-safe design, built-in test points and a complete complement of accessories for bridging and marking electrical circuits. UL recognized, CSA certified, CE compliant, VDE approved. Order accessories separately on pages DEKAFIX MARKING TAGS Use to mark terminal blocks and assemblies. White Dekafix tags are printed with large, black numbers, symbols, or characters. Tension clamp feed-through terminal blocks can hold 1 Dekafix tag on each side of the block, in addition to a center marking area. W series terminal blocks can hold 2 Dekafix tags on each side. To select the proper tag, make sure the width of the tag is no greater than the width of the terminal block. Both horizontal and vertical printing are available. Print on all tags is rubproof and oilproof. Other styles and custom printing available; go online or call. CONSECUTIVE HORIZONTAL INCREMENTS OF 50 Pre-Printed Numbers Width (mm) Stock No to H to M to H CONSECUTIVE HORIZONTAL INCREMENTS OF to M to M to H to H CONSECUTIVE VERTICAL INCREMENTS OF to M to H FEED-THRU Description Stock No. Price Each WKF 2.5/5, AWG, 600V/25A 59K WKF 4/5, AWG, 600V/0A 59K MULTICONDUCTOR WKF In-2-Out, AWG, 600V/20A 59K WKF In-2-Out, AWG, 600V/20A 59K WKF Double-Tier, 0-14 AWG, 600V/15A 58K DISCONNECT AND FUSE Lever Disconnect for Current Loop Testing, AWG, 58K V/20A Fuse Terminal for Fuse Holder, AWG, 600V/10A 58K GROUND WKF 2.5, AWG 59K WKF 4, AWG 58K (60084) 922

15 No Minimum Order Fees WKC SERIES DIN RAIL MOUNT IDC WKC 1 Feed-Thru Hybrid WKC 2.5 Feed-Thru Hybrid DIN RAIL ACCESSORIES FOR WKF AND WKC SERIES DIN RAIL MOUNT TERMINAL BLOCKS (CONT.) JUMPER BARS Description Stock No Z Fits WKC 4/WKC B Z Fits WKC 4/WKC B SCREWLESS END CLAMP Description Stock No Z mm DIN Rail 1C (5997) WK/WKN SERIES DIN RAIL MOUNT IEC SCREW CLAMP Fuse At Just 5mm and 6mm Wide, the taris Line Includes the Industry s Narrowest IDC Blocks Capable of Accepting 14 AWG UL94V-0 Non-Flammability Rating Built-In Test Points and Push-In Jumpers Marking Facilities at Each Termination Point Wieland s new taris line of Insulation Displacement Connection (IDC) DIN rail mount terminal blocks is designed to address the increasing demand for time and labor savings (up to 60% compared to screw terminals). Using a standard screwdriver, the IDC contact is moved into the unstripped wire and makes contact with the conductor by piercing the insulation on the wire. UL recognized, CSA certified, CE compliant, VDE approved. FEED-THRU TERMINALS Description Stock No WKC 1/ AWG, 600V, 1A 59K WKC 2.5/ AWG, 600V, 22A 59K WKC 1 S/C/5, AWG, 600V, 1A - Hybrid 02M WKC 2.5 S/C/5, AWG, 600V, 22A - Hybrid 02M GROUND TERMINALS WKC 1 SL/ AWG 58K WKC 2.5/SL/ AWG 59K WKC 1 S/C/5 Ground Terminal - Hybrid 02M WKC 2.5 S/C/5 Ground Terminal - Hybrid 02M IN-2-OUT TERMINALS WKC 1 D1/2/ AWG, 600V, 1A 58K WKC 2.5 D1/2/ AWG, 600V, 22A 02M FUSE TERMINALS WKC 1 TKG/ AWG, 600V, 6.A (Without Holder) 58K WKC 2.5 TKG/ AWG, 600V, 6.A (Without Holder) 59K Z x 20mm Fuse Holder (Without Indicator) 01M Z x 20mm Fuse Holder (With 24V Indicator) 19C (60082) ACCESSORIES FOR WKF AND WKC SERIES DIN RAIL MOUNT Fuse Terminal Block Ground Terminal Block WK/WKN series features a universal mounting foot for both 5mm and 2mm DIN rail, captive hardware, touch safe-design, vibration- and corrosion-resistant clamping design, and a complete complement of accessories for bridging and marking potentials. Available for designs requiring up to 5A and 22 AWG to 50 MCM conductors. UL recognized, CSA certified, CE compliant, VDE approved. Order accessories separately on pages FEED-THRU Available in colors for circuit identification; go online or call. Description Stock No. Price Each WK2.5/U Series, AWG, 600V/0A 02M WK4/U Series, AWG, 600V/5A 02M WK6/U Series, 22-8 AWG, 600V/50A 02M FUSE Lever Fuse Holder (5 x 20mm), AWG, 600V/6.A 19C Lever Fuse Holder (0.25 x 1.25 ), AWG, 600V/15A 19C Lever Fuse Holder with LED (0.25 x 1.25 ), AWG, 02M V/15A Z WK4 TKG Fuse Holder without Indicator (5 x 20mm) 01M GROUND TERMINAL BLOCK WK4SL/U, AWG 02M (59976) ACCESSORIES FOR WK/WKN SERIES DIN RAIL MOUNT DIN mounting rails, end clamps and marking tags also available; order separately on pages Jumper Bar END PLATES End plates provide electrical insulation for the exposed metal components of the last terminal block in the assembly. The end plates snap directly into the housing of the terminal block for ease of assembly. Description Stock No Fits WKF 2.5/.5 and WKF 4/5 59K Fits WKF 2.5/5 2-IN-2-OUT 59K Fits WKC 1 and WKC 2.5 Feed-Thru Terminal 1C Fits WKC 1 and IN-2-OUT and Fuse 1C JUMPER BARS Jumpers common 2 or more consecutive terminal blocks for the distribution of the electrical potential. Available in 2-to-20 pole configurations. Jumpers can be staggered to form longer lengths. For example, 2 2-poles equal common terminals. Description Stock No Z Fits WKF 2.5/WKC 1 2-Pole 01M Z Fits WKF 2.5/WKC 1 4-Pole 01M End Clamp End Plate Jumper Bar Mounting Rail Marking Tags END PLATES End plates provide electrical insulation for the exposed metal components of the last terminal block in the assembly. The end plates snap directly into the housing of the terminal block for ease of assembly. Description Stock No Fits Both WK2.5/U and WK4/U 59K Fits WK6/U 59K Find more at 92

16 DIN RAIL EURO ACCESSORIES FOR WK/WKN SERIES DIN RAIL MOUNT TERMINAL BLOCKS (CONT.) Description Stock No Partition plates are used to increase the electrical clearance between terminal blocks with different potentials or to provide visual separation of banks of terminal blocks in an assembly. Versions for assembly prior to and after terminal block is assembled onto the mounting rail Pre-Assembly Version Fits WK2.5/U and WK4/U 59K Pre-Assembly Version Fits WK6/U Series 59K Post Assembly Version Fits WK2.5/U 90F Post Assembly Version Fits WK4/U 59K JUMPER BARS Jumpers common 2 or more consecutive terminal blocks for the distribution of the electrical potential. Available in pre-cut 2-to-12 pole configurations or standard strips, which can be cut by the end user. Description Stock No Z Standard Strip (80 Poles) for WK2.5/U 01M Z Standard Strip (70 Poles) for WK4/U 01M Z Standard Strip (40 Poles) for WK6/U 01M DIN MOUNTING RAILS AND END CLAMPS Mounting rail comes standard in 2m (6 6 ) lengths and is available in both steel or aluminum construction with or without mounting slots. End clamps are mounted on both ends of a DIN rail assembly to ensure the security of the DIN rail mounted components TS-5mm Rail without Mounting Slots Zinc-Plated Steel 02M TS-5mm Rail with Mounting Slots Zinc-Plated Steel 02M TS-5mm Rail without Mounting Slots Aluminum 02M Z End Clamp Medium-Duty 01M Z End Clamp Heavy-Duty 99F Z Screwless End Clamp 1C MARKING TAGS FOR WK/WKN, WKF AND WKC SERIES DIN RAIL MOUNT For additional marking tag options and custom marking, go online or call. Description Stock No Fits WK2.5/U, WKF2.5/5 and WKC1/5, Marked K9219 (10 Tags) Fits WK4/U, WKF4/5 and WKC2.5/5, Marked 1-10 (10 59K9221 Tags) Fits WK2.5/U, WKF2.5/5 and WKC1/5, Marked K9220 (10 Tags) Fits WK4/U, WKF4/5 and WKC2.5/5, Marked (10 59K9222 Tags) Fits WK2.5/U, WKF2.5/5 and WKC1/5, Marked K2594 (2500 Tags) Fits WK4/U, WKF4/5 and WKC2.5/5, Marked K922 (2500 Tags) (59974) EUROSTYLE CAGE CLAMP EUROSTYLE CAGE CLAMP (CONT.) Positions Stock No C C ANGLE MOUNT, (5.08) CENTER SPACING Positions Stock No C C ANGLE MOUNT, (5.08) CENTER SPACING Positions Stock No C C C C C C C C (522) 2SV SERIES SUBMINIATURE SCREWLESS 2SV series screwless vertical mount terminal blocks are 0.45 H x 0.2 D (11.4 x 1.21). Wire range: AWG. 20A, 00V UL recognized; 20A, 150V CSA certified (except 24AWG). Solder terminal connections on 0.2 (5.08) centers. Handle multiple wires per terminal. Thermoplastic polyester body, flammability classification UL94V-0. Acid-tin plated copper alloy terminals. Standoffs for flux removal. Positions Dim. A Stock No SV (5.08) 46F SV (10.16) 46F SV (15.24) 46F SV (20.2) 46F SV (25.40) 46F SV (5.56) 46F SV (40.64) 46F SV (45.72) 46F SV (76.20) 46F (52) Vertical Vertical 90 Angle 45 Angle 45 Angle EUROSTYLE CAGE CLAMP PLUGGABLE Vertical 5.08mm (0.200 ) Centerline Wire Range: 12-0 AWG Current Rating: 17.5A 90 Angle 45 Angle Voltage Rating: 00V Temperature Rating: -40 C to 105 C UL Recognized, CSA Certified, VDE Approved Eurostyle cage clamp screw PC board terminal blocks feature black, polyamide 6/6 nylon housing, rated UL94V/0. Contact, cage clamp, and screw are nickel-plated brass. VERTICAL MOUNT, (5.08) CENTER SPACING Positions Stock No C C C C C C Right-Angle Plug Right-Angle Plug Right-Angle Header Right-Angle Header Right-angle plug and vertical or right-angle header terminal blocks, available with 5.00mm and 5.08mm centerline. Cage clamp design is ideal for frequent terminations. Green housings. Current rating: 12A max. Voltage rating: 00V. Wire range: 12-0 AWG. Temperature rating: -40 C to 105 C. 5.00mm RIGHT-ANGLE PLUGS Positions Stock No C C C C C

17 See More Online From 440+ Top Brands. EUROSTYLE CAGE CLAMP PLUGGABLE (CONT.) 5.08mm RIGHT-ANGLE PLUGS Positions Stock No C C C C C C mm RIGHT-ANGLE CLOSED-END HEADERS Positions Stock No C C K C mm VERTICAL CLOSED-END HEADERS Positions Stock No C C C mm RIGHT-ANGLE CLOSED-END HEADERS Positions Stock No C C C C C mm VERTICAL OPEN-END HEADERS Positions Stock No C C C (69027) IEC ENCLOSED POWER DISTRIBUTION BLOCKS 600 Volt, Up To 580A Conforms to IP-20 (Finger-Safe) Mounts on Panel or 5mm DIN Rail UL Recognized, CSA Certified EURO IEC power blocks feature oversized wire openings to accept stranded wire and multiple wire combinations. European touch-proof design. 5mm DIN or panel mount, with dovetail sides for ganging multiple poles. ALUMINUM CONNECTORS Price Line Load Each Poles Openings /Pole Wire Range Openings /Pole Wire Range Amps Stock No. EPBAD /0-14AWG 1 2/0-14AWG 195 0K EPBAD /0-14AWG 4 2/0-14AWG 195 0K EPBAD kcmil-6AWG 2 250kcmil-6AWG 580 0K EPBAD kcmil-6AWG 1 1 2/0-14AWG AWG 80 0K COPPER CONNECTORS Line Load Price Each Mfg. Part No. Poles Openings /Pole Wire Range Openings /Pole Wire Range Amps Stock No. EPBCD /0-14AWG 1 2/0-14AWG 195 0K EPBCD /0-14AWG 4 2/0-14AWG 195 0K EPBCD kcmil-6AWG 2 250kcmil-6AWG 580 0K EPBCD kcmil-6AWG 1 1 2/0-14AWG AWG 80 0K (84889).5mm BEAU EUROSTYLE 985 SERIES HEAVY-DUTY, PRESSURE CONTACT Rated 600V, 85A Wire Range: 18-4 AWG Copper Tubular Terminals Screws: Steel, Nickel-Plated Molded material is commercial grade phenolic (black). UL recognized file no. E CSA certified file no. LR ISO9001:2000 certified. Terminals Length Stock No. 985-GP F GP F GP F GP F GP F (5475) 0987 SERIES PRESSURE CONTACT Rated 600V, 50A Wire Range: 24-8 AWG Nickel-Plated Steel Screws Terminal contacts are copper alloy, nickel-plated. Feed-thru contacts are copper alloy, electro tin-plated. UL recognized file no. E47811, CSA certified file no. LR19766, ISO9001:2000 certified. Terminals Length Stock No RZ-TC B RZ-TC F RZ-TC F RZ-TC F RZ-TC F RZ-TC F (5476) 0% density advantage over traditional 5.00mm (0.197 ) terminal blocks Headers have been designed to withstand surface mount re-flow soldering processes, eliminating the need for secondary wave soldering operations and reducing assembly time Rising cage clamp termination provides a gas-tight connection without strand damage or intermittence Polarization and keying features prevent mismating. 180 WIRE ENTRY PLUG Circuits Stock No M M M M M M M WIRE ENTRY PLUG SCREW RETENTION Circuits Stock No M M M M M VERTICAL PCB HEADER CLOSED ENDS Circuits Stock No M M M M Find more at 925

18 EURO.5mm BEAU EUROSTYLE (CONT.) VERTICAL PCB HEADER THREADED RETENTION INSERTS Circuits Stock No M M M M M RIGHT-ANGLE PCB HEADER CLOSED ENDS Circuits Stock No M M M M M M M RIGHT-ANGLE PCB HEADER THREADED RETENTION INSERTS Circuits Stock No M M M M M FIXED MOUNT PCB TERMINAL BLOCK Circuits Stock No K H H H H H (8488) 85 SERIES EUROSTYLE PC BOARD (CONT.) No. of Poles Length Stock No (0) 89F (40) 8H (5188) ESE SERIES SINGLE- PIECE FIXED Polyamide Housing, Rated UL94V-0 Wire Range: 12 to 26 AWG Operating Temperature: 55 to +110 C Permanent-mount Eurostyle terminal blocks in (5.08mm) spacing. Tin-plate brass pressure clamps compress wire uniformly. Straight thru terminals. Closed bottom prevents solder wicking. Hot tin dip phosphor bronze contacts. Zinc chromate-plated steel screws. 0. (8.8mm) wide footprint. Withstanding: 6500VDC. Contact resistance: <10 milliohms initial. Additional pole positions available; go online or call. UL recognized 00V; CSA certified 00V. VDE approved 250V. No. of Poles Stock No M M M M M (5189) ESE SERIES 5.00mm EUROSTYLE PLUGGABLE PC BOARD TERMINAL BLOCK PLUGS AND HEADERS 84 SERIES 5.0mm ECONOMICAL SCREW Wire Range: 16 to 0 AWG Low profile conserves space Rated UL94V-0 84 series Eurostyle screw terminal blocks allow for simple and reliable field termination in tight spaces. Dovetail stacking. Copper alloy clamps provide repeatable wire clamping. Insulator: polyamide. Zinc-chromate plated steel screws. 00V, 1.5A. No. of Poles Stock No K K (5224) 85 SERIES EUROSTYLE PC BOARD Black thermoplastic housing, rated UL94V-0 Current: 20A Voltage: 6500Vrms Wire size: 12 to 0AWG Straight PC wire entry to 14 AWG; 12 AWG minimum stranded or multiple (5.00mm) contact spacing provides up to 5 terminations per inch. Dead front construction; recessed, captive screws. Closed side prevents wires from passing through. Size: 0.475H x 0.50 W (12.07 x 8.89mm). Available in 10mm contact spacing; add suffix 10mm to mfg. part no. Additional pole positions available; go online or call Newark. No. of Poles Length Stock No (5) 89F (10) 89F (15) 89F (20) 89F mm PLUGGABLE PC BOARD TERMINAL BLOCK PLUGS FIG. 1 Poles Length Stock No M mm PLUGGABLE PC BOARD HEADERS, CLOSED-END, VERTICAL FIG M M M M M M M M mm PLUGGABLE PC BOARD HEADERS, CLOSED-END, RIGHT-ANGLE FIG M M M M M M M (75867) Fig. 1 Fig. 2 ESE series 5.00mm Eurostyle pluggable PC board terminal block plugs and headers have the same ratings as the 86 series 5.08mm pluggable PC board terminal block plugs and headers; order separately on page 927 and on page 927. Fig. 926

19 Find Datasheets & Tech Chat Online. ESE SERIES (5.08) EUROSTYLE PLUGGABLE PC BOARD TERMINAL BLOCK PLUGS Fig. 1 Fig. 2 Fig. Black Polyamide Housing, Rated UL94V-0 Wire Range: AWG ESE series (5.08mm) Eurostyle pluggable PC board terminal block plugs for wire-to-pc board applications. Polarized with the industry-standard scalloped design. Tin-plated phosphor bronze contacts. Rising cage, nickel-plated brass pressure clamp compresses wires for a higher-pressure, gastight interface. 2.5mm zinc chromate-plated steel screws. Compatible with convection or vapor-phase soldering. End-to-end stackable. Intermateable with most pluggable 5.08mm terminal block headers. UL recognized Class B commercial 15A at 00V/Class C industrial 10A at 00V, CSA certified 15A at 00V. 87 series (5.00mm) Eurostyle pluggable PC board terminal block plugs are also available; go online or call. ESE SERIES (5.08mm) STANDARD PLUGS FIG. 1 Poles Stock No M M M70 2. ESE SERIES VERTICAL RIGHT-HAND PLUGS FIG M M M M M762.5 ESE SERIES (5.08mm) VERTICAL LEFT-HAND PLUGS FIG M M (5207) ESE SERIES (5.08) EUROSTYLE PLUGGABLE PC BOARD TERMINAL BLOCK HEADERS 2-SCREW TERMINAL STRIPS Closed-back strips can be cut to size. Center-to-center spacing when installed end-to-end. Mounting holes between every circuit. Dead-front construction. Recessed screws, terminals. Captive wire protectors. C-15 series0.646h x 0.60 W (16.4 x 16.0) and VDE approved C-40 series 0.748H x W (19.0 x 20.0) are UL rated 250Vrms commercial equipment/00vrms general individual. VDE approved C-60 series 0.874H x W (22.5 x 24.0), UL rated: 600Vrms commercial equipment and general individual. EURO C-15 SERIES 10 AMPS, 0.15 (8.00) CENTERS 12 AWG Poles Length (mm) Stock No (1.8) 41K (21.8) 41K (29.8) 7K (7.8) 69K (45.8) 7K (61.8) 45K (77.8) 7K (9.8) 5K C-40 SERIES 10 AMPS, 0.94 (10.00) CENTERS 12 AWG (26.5) 7K * 1.04 (26.5) 7K (6.5) 7K (46.5) 68K (56.5) 7K (76.5) 7K (96.5) 7K (116.5) 68K C-60 SERIES 25 AMPS, (12.00) CENTERS 8 AWG (116) 9K (140) 69K *Low profile (5190) SCREW CLAMP AND ACCESSORIES VERTICAL HEADERS CLOSED-END FIG. 1 No. of Poles Stock No M M M HORIZONTAL 90 HEADERS CLOSED-END FIG M M M (5208) (94656) Fig. 1 Fig.2 Black Nylon Housing, Rated UL94V-0 Wire Range: 12-0 AWG ESE series (5.08mm) pin spacing headers in vertical and horizontal configurations. Polarized and keyed with the industry-standard scalloped design. Tin-plated brass pins. Rising cage pressure clamp compresses wires for a higher-pressure, gastight interface. Intermateable with most pluggable (5.08mm) terminal block plugs. UL recognized Class B commercial 15A at 00V/Class C industrial 10A at 00V, CSA certified 15A at 00V. Constructed of zinc-plated steel with a rising clamp design that provides maximum vibration-proof installation and corrosion resistance. Tin-lead plated copper current bars for minimum contact resistance. Terminal block material is thermoplastic with temperature resistance to 105 C. Terminals are rated 600V and are used in conjunction with standard DIN rails; ordered separately on page 917. Order end covers, end brackets and jumpers separately below. UL listed, CE compliant, VDE approved. DIN RAIL MOUNT Thickness Description Amp (A) AWG (mm) W (mm) Ht. (mm) Stock No. SPC10564 PEK 2.5 Feed-Thru C SPC10565 PEK 4 Feed-Thru C SPC10566 PEK 6 Feed-Thru C SPC10567 PEK 10 Feed-Thru C SPC10570 Fuse Block* C SPC10571 Fuse Block C SPC10569 Disconnect Block C SPC10568 Ground Block C *24VDC; +110VAC ACCESSORIES Description Stock No. SPC1057 End Cover (Feed-Thru), 1.5mm Thickness 19C SPC10572 End Cover (Fuse Disc), 1.5mm Thickness 19C SPC1178 End Bracket, 8 AWG 7C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C Find more at 927

20 EURO SCREW CLAMP AND ACCESSORIES (CONT.) Description Stock No. SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC Pole Jumper for Type SPC C SPC11912 Fuse Block without Indication 8C (66779) INSULATED SCREWDRIVERS FOR 2 SERIES CAGE-CLAMP PCB (CONT.) Poles Stock No /RN K /RN K /RN K /RN K /RN K /RN K /RN K (84647) LM SERIES.5mm SCREW CLAMP SINGLE-LEVEL AND DOUBLE- LEVEL Insulated screwdrivers are ergonomically designed so that proper tightening torques can be applied on all terminal blocks. Constructed of hardened steel. CE compliant. Dimensions (mm) Stock No. A B C SPC C SPC C SPC C (68727) 862 SERIES CHASSIS MOUNT Chassis-mount terminal strips feature convenient pushbutton-operated CAGE CLAMP spring pressure wiring technology. Rated 600V/5A, 00V/15A. Accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). 2 conductors per pole. Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. CHASSIS MOUNT Connection Points Poles Stock No /RN K /RN K /RN K /RN K MARKING STRIP Description Stock No Marking Strip, 7.5mm x 00m 28K (84747) 90 Single 90 Single 15 Single 90 Double Low Profile Design Can Be Dovetailed Together Small.5mm Pitch Features a gastight, vibration-resistant clamping yoke wire termination. Small.5mm pitch and low profile make these terminal blocks ideal for high-density applications where space saving is critical. 2- and -pole blocks can be dovetailed together to maker higher pole versions. Accepts wire size: AWG. UL rated at 00V, 10A. Color: black. Also available in orange; go online or call. LM.50/90, SINGLE-LEVEL, 90 ORIENTATION No. of Poles Stock No B M M (8X10). 8 11B B LM.50/15, SINGLE-LEVEL, 15 ORIENTATION B M LM2N.50/90, DOUBLE-LEVEL, 90 ORIENTATION C C C C C C C C (1978) LM SERIES 5.00/5.08mm MULTILEVEL SCREW CLAMP 2 SERIES CAGE-CLAMP PCB 90 Single 90 Single 15 Single Printed circuit board mount terminal blocks feature CAGE CLAMP spring pressure wiring technology. Rated 150V/4A. Accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar and solder pins are lead-free tin-plated copper alloy. Clamp is stainless steel. PCB, 2.54mm, ORANGE (Fig. 1) Poles Stock No /RN K /RN K /RN K Single Single-, Double-, and Triple-Level Blocks 90, 15, 180 Wire Orientations Low-Profile Design 90 Double 90 Triple 928

21 You Need. We Speed. Order Today. LM SERIES 5.00/5.08mm MULTILEVEL SCREW CLAMP TERMINAL BLOCKS (CONT.) Features a gastight, vibration-resistant clamping yoke wire termination. Low-profile terminal blocks are ideal for applications where space saving is critical. Double- and triple-level blocks for high-density applications. 2- and -pole blocks can be dovetailed together to maker higher pole versions. Accepts wire size: AWG. UL rated at 00V, 10A. Color: black. Also available in orange; go online or call. LM 5.00/90, SINGLE-LEVEL, 90 ORIENTATION No. of Poles Stock No M B B B B LM 5.00/15, SINGLE-LEVEL, 15 ORIENTATION B M B LM 5.08/90, SINGLE-LEVEL, 90 ORIENTATION M M M M M B B LM 5.08/15, SINGLE-LEVEL, 15 ORIENTATION B B B B B LM 5.08/180, SINGLE-LEVEL, 180 ORIENTATION B M B M LM2N 5.08/90, DOUBLE-LEVEL, 90 ORIENTATION, OFF-SET LEFT M C C C M C H H LMR 5.08/90, TRIPLE-LEVEL, 90 ORIENTATION C M C C C C H H (1979) PM SERIES 5.08mm LEAF SPRING SCREW CLAMP For Commercial Applications Can Be Dovetailed Together Reliable terminal for commercial applications. 2- and -pole blocks can be dovetailed together to make up to 16 pole versions. Wire range: AWG. UL rated for 00V, 16A. Also available in additional pole positions; go online or call. No. of Poles Color Stock No Orange 18M Orange 92B Black 14C Black 26M (49777) TOP SERIES 5.08mm SCREW CLAMP EURO Screw Clamp Terminal Block for Applications That Require Wire and Screwdriver Access in the Same Plane TOP 1.5GS 5.08: 00V, 10A UL Rating; Accommodate AWG Wires Products Featured in Black; Also Available in Orange 4GS 7.62mm Versions Available; Go online or call UL Recognized No. of Poles Orientation Stock No C C C C C C C C C C C C C C (5270) LP SERIES 5.00/5.08mm SCREW CLAMP LP 90 Single-Level TOP 5.08mm/90 LP 15 Single-Level TOP 5.08mm/180 LPP 90 Single-Level LP2N 90 Double-Level LPTR 90 Single-Level LPR 90 Triple-Level High-Performance Blocks: 00V, 15A UL Rating; Accept AWG Wires Feature a Gastight, Vibration-Resistant Clamping Yoke Wire Termination 2- and -Pole Versions Can Be Dovetailed to Make Higher Pole Versions Single-Level Blocks Available with or without Test Points Single-Level Blocks are Black; Multilevel Blocks are Orange Accessories and single-level terminal blocks in 7.50mm and 7.62mm pitch versions are available; go online or call. UL recognized. LP 5.00/90, SINGLE-LEVEL, 90 ORIENTATION, SCREW CLAMP No. of Poles Stock No B B B LPP 5.00/90, SINGLE-LEVEL, 90 ORIENTATION WITH TEST POINTS, SCREW CLAMP B B LP 5.00/15, SINGLE-LEVEL, 15 ORIENTATION WITH TEST POINTS, SCREW CLAMP B B Find more at 929

22 EURO LP SERIES 5.00/5.08mm SCREW CLAMP (CONT.) LP 5.08/90, SINGLE-LEVEL, 90 ORIENTATION, SCREW CLAMP No. of Poles Stock No B B LPP 5.08/90, SINGLE-LEVEL, 90 ORIENTATION WITH TEST POINTS, SCREW CLAMP B B LPTR/5.08, SINGLE-LEVEL, 90 ORIENTATION, DISCONNECTION ELEMENT WITH TEST POINTS, SCREW CLAMP C LP 5.08/15, SINGLE-LEVEL, 15 ORIENTATION WITH TEST POINTS, SCREW CLAMP B B LP 2N/5.00, DOUBLE-LEVEL, 90 ORIENTATION, LOW-PROFILE, OFFSET LEFT, SCREW CLAMP F F F B F LP 2N/5.08, DOUBLE-LEVEL, 90 ORIENTATION, LOW-PROFILE, OFFSET LEFT, SCREW CLAMP M F F B F LPR/5.08, TRIPLE-LEVEL, 90 ORIENTATION, SCREW CLAMP H H (5266) MK 8 SERIES 45 SINGLE- LEVEL BLOCKS LX SERIES 15.00mm 600V SCREW CLAMP (CONT.) No. of Poles Stock No C H LXB 15.00/90, SINGLE LEVEL, WITH TEST POINTS AND FLANGE FIG C C H C C LXBL 15.00/90, SINGLE LEVEL, WITH TEST POINTS AND FLANGE FIG C (6897) MK SERIES DIRECT MOUNT TERMINAL STRIPS Direct mount terminal strips provide space-saving termination for basic feed-through applications. Use modified box clamp system, where a moving shield plate compresses wire against current bar. Material: polyamide. Mfg. part no ratings: UL recognized 00V/20A, AWG; CSA certified 00V/25A, AWG. Mfg. part no ratings: UL recognized 00V/0A, AWG; CSA certified 00V/40A, AWG; VDE approved 690V/41A, 6mm 2. Poles Length Stock No (109.9) 90F (74.90) 90F (5246) MK/12 (2456) 8142 SERIES 2-PC. PC BOARD DISCONNECT MK6/6 ( ) Molded multi-position blocks with center spacing (5.08). Pin diameter: (1.0). Pin length: (5.00). Molding material: polyamide 6.6. Strip length: 0.24 (0.610). UL recognized 50V/15A, AWG. CSA certified 150V/10A, AWG. VDE approved 60V/16A, AWG. (5249) Poles Stock No F F M F Connector Strip LX SERIES 15.00mm 600V SCREW CLAMP Fig Wire Orientation Large 15.00mm Pitch Gastight Screw Clamp Termination Fig. 2 Integrated Test Points Heat Dissipation Vents Designed for drives technology, frequency converters and power supply applications. Gray housings UL rated for 600V, 85A. Wire range: 16-4 AWG. LX 15.00/90, SINGLE LEVEL, WITH TEST POINTS FIG. 1 No. of Poles Stock No C C M Pin Strip Solderable connector strip for (5.00) spacing allows connection and disconnection of up to 24 poles to and from printed circuit in one simple plugging operation; go online or call for pole sizes not listed. Wires connected to flush-mounted strip by screws having wire protection spring. Two connector pins available: 1.mm diameter above board and 1.0mm diameter below board or 1.mm diameter above board and 1.mm diameter below board. Tin-plated socket contacts. Pin strips can be field cut to desired length. 15A, 00V, AWG. UL recognized, CSA certified, VDE approved. NOTE: Parts listed are unmarked. Marked parts also available; go online or call SERIES (5.00mm SPACING) CONNECTOR BLOCKS Poles Stock No F M F F F F F F

23 No Minimum Order Fees 8142 SERIES 2-PC. PC BOARD DISCONNECT (CONT.) 8142 SERIES (5.00mm SPACING) PIN STRIPS (1./1.0mm PIN DIA.) Poles Stock No Z K Z K Z K Z K SERIES (5.00mm SPACING) PIN STRIPS (1.1/1.mm PIN DIA.) Z F Z K Z K Z K Z K Z K (5205) 5.00MM and 5.08MM LOW- PROFILE 5 ANGLED MODULAR PC BOARD 11.5mm low profile 2-24 pole configurations 0-14 AWG, 00V, 20A factory, 15A field 5 angle entry allows for easy access when space is limited. Housing flammability rated at UL94V-0. Available with or without insulating plate, with or without fixing bolt, marked or unmarked: go online or call for versions not listed. 814 SERIES ANGLED ENTRY MODULAR mm SPACING, UNMARKED WITHOUT INSULATING PLATE Poles Length (mm) Stock No K K K K K SERIES ANGLED ENTRY MODULAR mm SPACING, UNMARKED WITHOUT INSULATING PLATE Poles Length (mm) Stock No F F K K K (4998) 8192 AND 8292 SERIES LOW- PROFILE MODULAR PC BOARD 8192 series (5.00mm pin spacing) and 8292 series (5.08mm pin spacing) modular interlocking terminal blocks with low-profile, 10mm height. Field wiring rated at 00V, 15A. Factory wiring rated at 00V, 20A 14-0 AWG. Constructed of Polyamide 6.6 material, rated UL94V-0. UL recognized, CSA certified, VDE approved. Available in 2- to 24-pole configurations, with or without insulating plate, with or without fixing bolt, and in marked or unmarked versions; go online or call for versions not listed below SERIES (5.00mm PIN SPACING) MODULAR PC BOARD - UNMARKED WITHOUT INSULATING PLATE Poles Length (mm) Stock No K K K K SERIES (5.08mm PIN SPACING) MODULAR PC BOARD - UNMARKED WITHOUT INSULATING PLATE Poles Length (mm) Stock No K K EURO 8192 AND 8292 SERIES LOW-PROFILE MODULAR PC BOARD TERMINAL BLOCKS (CONT.) Poles Length (mm) Stock No K K (49985) 5MM AND 5.08MM MODULAR PC BOARD 00V, 0A, 12AWG 2-24 pole configurations Marked or unmarked All can be interlocked to form different configurations. Fully enclosed parts, nickel-plated brass cage clamps, test point provisions. Field rated a 00V, 20A. Made of polyamide 6.6 UL94V-0 rated material. Available with or without insulating plate, with or without fixing bolt. For versions not listed below; go online or call SERIES 5.00MM PC BOARD UNMARKED, NO INSULATING PLATE Poles Length Stock No mm 59K mm 60K mm 59K mm 59K mm 40B mm 58K SERIES 5.08MM PC BOARD UNMARKED, NO INSULATING PLATE Poles Length Stock No mm 59K mm 59K mm 59K mm 40B mm 60K mm 59K mm 59K Z SERIES 5.08MM PIN SPACING Poles Length Stock No mm 59K mm 59K (526) COMPACT TERMINAL STRIPS Extremely compact terminal strips for panel and surface mounting. Polyamide 6 insulating body with nickel-plated connectors, supplied with self-locking screws to prevent loosening of contacts. Phosphor bronze wire guards. Zincplated steel clamping screws. Metal parts enclosed or recessed for safety. Rated: 250V, 20A, AWG maximum. UL recognized, CSA certified, VDE approved 0110 Gr. C. (521) Poles Length (mm) Stock No F M F F M M Find more at 91

24 EURO PLUG & SOCKET DIVISIBLE EUROPA STRIPS Phosphor bronze wire guard Polyamide 6 insulation Nickel-plated connectors Zinc-plated clamping screws Captive screws Strips feature phosphor bronze wire guard between screw and conductor for protection against damage. Polyamide 6 insulation body is easily cut with a knife or saw. To double voltage performance to 600V from 00V order spacers separately below. 6EHDS series offers a 600V rating without requiring a spacer. Other sizes available; go online or call. 4EDS SERIES - 250V, 10A, AWG Poles L (mm) Stock No K K K K K K K K EDS SERIES - 00V,15A, AWG M F M M F M EDS SERIES - 00V, 20A, AWG M M M M M M EDS SERIES - 00V, 0A, AWG F M K M F EDS SERIES - 00V, 65A, 22-6 AWG M M M M EHDS SERIES - 600V, 20A, AWG M M M M F M SPACERS FOR TERMINAL STRIPS Increase 00V strips to 600V. Comes with 12 poles. Cut to required length. For Terminal Strip Stock No EDS Series 58K EDS Series 1F EDS Series 59K EDS Series 59K (5229) PCB MOUNT Wire receptacle, side wire-entry, vertical PCB mount, 16-0 AWG, 0.2 in (5.08 mm) centerline, green. Voltage rating: 250 VAC. Housing material: polyamide 6.6. Contact material: brass. Positions Stock No K K C H H PCB MOUNT (CONT.) Positions Stock No H H H H H H H H H H H H H H H H H H H (795) 97 SERIES HIGH-POWER High Temperature Thermoplastic Housing, Rated UL94V-0 Wire Range: 6-18 AWG Current: 60A Rising clamp termination system produces a secure and reliable gastight interface. Designed for 600V applications. The deep wire funnel shrouds the wire and the insulator jacket preventing arcing between adjacent wires. No. of Poles Stock No K K K (6518) 98 SERIES PLUGGABLE TERMINAL BLOCK SYSTEM Plug Black Polyamide Housing, Rated UL94V-0 Voltage: 00V Feature 5.08mm pitch terminal block plugs and headers with patent-pending positive latching mechanism. Secures the mating plug to resist vibration and the molded integral construction of the latch offers substantial cost savings over screw lock designs. Polarized to enable proper blind mating. Space-saving, compact design is 69% shorter and 45% more narrow than standard pluggable terminal blocks. Header is high-temperature design and rated for reflow solder ovens. UL recognized. PLUGS No. of Poles Stock No B B B B HEADERS No. of Poles Stock No B B B B (65184) Header Current: 10A Wire Range: AWG

25 See More Online From 440+ Top Brands. 8 AMP HORIZONTAL, PLUGGABLE CAGE CLAMP Specifications:.5 mm Spacing Wire size: AWG. Voltage Rating: 125 V Operating Temperature: -0 C to +105 C Insulating polyimide housing, flammability rated UL94V-0 UL recognized, CSA certified, VDE approved. Horizontal and vertical mating headers are available; go online or call. Poles Stock No. 9 SPC K SPC K SPC K SPC K SPC K SPC K (1797) VERTICAL TERMINAL BLOCKS, CAGE CLAMPS PLUG & SOCKET WIRE GUARD, COMBINATION VERTICAL/HORIZONTAL Multiconnector system features 2- and -pole plugs that mate with straight unshrouded pin header, ordered separately below. Suitable for mass assembly. Cage-clamp style plugs allow connection to be disconnected and then restored numerous times. Wire size: AWG. Unbreakable insulating polyimide housing, flammability rated UL94V pole pin header can be cut down to size. UL recognized, CSA certified, VDE approved. Description Poles Spacing H x W Stock No. 9 SPC15594 Plug mm 10.8 x 1.5mm 82K SPC15595 Plug 5.00mm 10.8 x 1.5mm 82K SPC15596 Header mm 12.5 x 2.8mm 82K (1798) Plug 7 SERIES MULTI-CONNECTION SYSTEM PLUGS AND HEADERS Header Specifications: Voltage Rating: 250 V Current Rating: 15 A Operating Temperature: -0 C to +105 C VERTICAL PLUG, 5.00 mm SPACING, WIRE SIZE 22 TO 10 AWG Poles Stock No. 9 SPC K SPC K TOP WIRE ENTRY, VERTICAL PLUG, 5.08 mm SPACING, WIRE SIZE 28 TO 14 AWG SPC K SPC K SPC K ( ): Reverse Vertical Plug (885) (17929) Vertical Plug Top Wire Entry Vertical Plug Insulating polyimide housing, flammability rated UL94V-0 15 AMP HORIZONTAL, PLUGGABLE CAGE CLAMP Specifications: Voltage Rating: 250 V Spacing: 5.00mm or 5.08mm Wire Size: AWG Insulating polyimide housing, flammability rated UL94V-0 UL recognized, CSA certified, VDE approved. Mate with horizontal or vertical headers, Ordered separately 5.00 mm SPACING Poles Stock No. 9 SPC K SPC K SPC K SPC K mm SPACING SPC K SPC K SPC K SPC K SPC K SPC K SPC K SPC K Fig. 1 Fig. 2 High-density pluggable printed circuit board mount terminal blocks feature CAGE CLAMP spring pressure wiring technology, 100% protection against mis-mating modular assembly. Rated 125V/4A. Connectors accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. FEMALE CONNECTORS (Fig. 1) Poles Stock No /RN K /RN K /RN K /RN K /RN K /RN K STRAIGHT HEADERS (Fig. 2) 07-02/RN K /RN K /RN K /RN K /RN K /RN K MCS HORIZONTAL HEADERS, 2.5mm PIN SPACING /RN K /RN K /RN K /RN K /RN K /RN K (84652) 21 SERIES PLUGS AND HEADERS Pluggable printed circuit board mount terminal blocks feature CAGE CLAMP spring pressure wiring technology. Rated 600V/5A, 00V/15A. Connectors accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. Female Connector Straight Header FEMALE CONNECTOR, 5.08mm, ORANGE Poles Stock No / /RN K / /RN K Find more at 9

26 PLUG & SOCKET 21 SERIES PLUGS AND HEADERS (CONT.) Poles Stock No / /RN K / /RN K / /RN K / /RN K / /RN K / /RN K STRAIGHT HEADERS, 5.08mm, ORANGE Poles Stock No / /RN K / /RN K / /RN K / /RN K / /RN K / /RN K / K / K / K FEMALE CONNECTOR, 5.00mm, GRAY Poles Stock No / /RN K / /RN K / /RN K / /RN K / /RN K / /RN K / K / /RN K / /RN K STRAIGHT HEADER, 5.00mm, GRAY Poles Stock No / /RN K / K / /RN K / /RN K / /RN K / /RN K / /RN K / K / K (8461) 256 SERIES PCB WITH OPERATING LEVERS Printed circuit board mount terminals blocks feature convenient lever-operated CAGE CLAMP spring pressure wiring technology. Rated 600V/5A, 00V/15A. Accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. Other colors available, go online or call NewarkinOne. PCB WITH OPERATING LEVERS, 5.00mm, GRAY Poles Stock No /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K (84648) 26/76 SERIES PCB 26 Series 76 Series Printed circuit board mount terminal blocks feature CAGE CLAMP spring pressure wiring technology. Mfg. part no. 26 is rated 600V/5A, 00V/15A. Mfg. part no. 76 is rated 00V/10A. Connectors accept AWG wire. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. SERIES 26 PCB, 5.00mm Poles Stock No /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K /RN K K SERIES 76 TWO-LEVEL PCB, 5.00mm Poles Stock No K K K /RN K K K (84649) 745 SERIES SINGLE LEVEL PCB Printed circuit board mount terminal blocks feature CAGE CLAMP spring pressure wiring technology. Pin spacings of 7.5mm or 10mm in a variety of ratings and wire sizes. Insulation housing: polyamide 6.6 to UL94V-0 (rated 105 C). Current bar is lead-free tin-plated copper alloy. Clamp is stainless steel. 5mm PIN SPACING Poles AWG Rating Stock No V/10A 28K /RN V/10A 79K /RN V/10A 79K /RN V/10A 79K mm PIN SPACING Poles AWG Rating Stock No /RN V/10A 79K V/10A 28K V/10A 28K V/10A 28K (84650) (94660) 94

27 Find Datasheets & Tech Chat Online. PLUG & SOCKET S2L/B2L SERIES DOUBLE-DENSITY.5mm CONNECTOR SYSTEM.5mm PITCH PIN HEADERS (CONT.) B2L.5LH/180 2 connection rows in 1 housing doubles the connection density of standard.5mm systems. Takes up to 10% less board space and 0% less front panel space than 2.5/2.54mm connector systems. Open-end, closed-end, locking and release lever versions available. Tin-plated copper/tin contacts. Gold plating available; go online or call. Molded black PBT material has V-0 flammability rating. S2L SERIES 90 DUAL-ROW PIN HEADERS, FLANGED No. of Poles Stock No C C C C C C C S2L SERIES 90 DUAL-ROW PIN HEADERS, OPEN-END, NONLOCKING B S2L SERIES 180 DUAL-ROW PIN HEADERS, OPEN-END, FLANGED, LOCKING C C C C C C C B2L.5H SERIES 180 DUAL-ROW SOCKET CONNECTORS, NONLOCKING, TENSION CLAMP B B B C B2L SERIES 180 DUAL-ROW SOCKET CONNECTORS, LOCKING C C C C C C C (49778) S2L.5/90 Dual-Row, Open-End Pin Header B2L.5LH/180 Dual-Row, Nonlocking Socket Connector.5mm PITCH PIN HEADERS B2L.5/180 Dual-Row Socket, Nonlocking S2L.5/90 Time-Saving Tension Clamp Wire Termination Accepts AWG Wires; 150V, 10A UL Rating S2L.5/180 Open-End SLD Recessed 90 SLD Recessed 90 Double-Level Double-Level B2L.5/180 Small.5mm pitch is ideal for miniaturization and high-density applications. Single- and double-level pin headers mate with all.5mm socket connectors; ordered separately on page 96. Offered in standard thru-hole and surface mount compatible versions. SL and SLD series pin headers are molded from black, PBT material with a V-0 flammability rating. SL series surface mount compatible pin headers are molded from halogen-free, high-temperature resistant, black LCP material which is suitable for all SMT soldering processes. Thru-hole reflow technology enables 100% SMT production, double-sided PC boards, and greater tensile strength than standard SMT components. UL rated for 00V, 10A. Available in tape-on-reel or tray packaging; go online or call. SL.5/90G, SINGLE-LEVEL, 90 ORIENTATION, CLOSED-END, NONLOCKING No. of Poles Stock No B B B B K M B SL.5/180G, SINGLE-LEVEL, 180 ORIENTATION, CLOSED-END, NONLOCKING K K M B SL.5/180F, SINGLE-LEVEL, 180 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING C B C SL.5/90F, SINGLE-LEVEL, 90 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING F C F B B B F SL-SMT.5/90F, SINGLE-LEVEL, 90 ORIENTATION, CLOSED-END, NONLOCKING C SL-SMT.5/180G, SINGLE-LEVEL, 180 ORIENTATION, CLOSED-END, NONLOCKING C C SL-SMT.5/180LF, SINGLE-LEVEL, 180 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING C C C C C C C C H SL-SMT.5/90LF, SINGLE-LEVEL, 90 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING C C C C C C C C H SLD.5/90G, DOUBLE-LEVEL IN-LINE, 90 ORIENTATION, CLOSED-END, NONLOCKING B K (526) SLD Recessed 180 Double-Level SLD In-Line 90 Double-Level SL 90 Single-Level SL 90 Single-Level SL 180 Single-Level SL SMT 180 Single-Level SL SMT 90 Single-Level Find more at 95

28 PLUG & SOCKET.5mm PITCH SOCKET CONNECTORS BL.5/180 BL.5/180 BL.5/90 /270.5mm PITCH SOCKET CONNECTORS (CONT.) BLIDC.5F, IDC, 90 /180 ORIENTATION, WITH FLANGE, LOCKING No. of Poles Stock No H C H BLIDCB.5F, IDC BUS, 90 /180 ORIENTATION, WITH FLANGE, LOCKING C C C C C (1977) BLZF.5/180 BLZF.5/180 BLIDC, BLIDCB.5 90 /180 Wire Connection Styles: Screw Clamp, Tension Clamp, and IDC Molded from Black PBT Material with V-0 Flammability Rating BLIDC, BLIDCB.5 90 /180 Mate with all.5mm pin headers; order separately on page 95. BL series socket connectors feature a gastight, vibration-resistant clamping yoke wire termination and are rated for 00V, 10A (28-14AWG) per UL. BLZF series socket connectors feature time-saving tension clamp wire termination and is rated for 00V, 10A (26-14AWG) per UL. BLIDC series socket connectors feature insulation displacement wire termination which reduces wiring time; rated for 00V, 7A (22-20AWG) per UL. BLIDC B series is a bus version IDC connector plug for uninterrupted bus wiring and daisy chaining. Locking versions are available; go online or call. BL.5/90, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, NONLOCKING No. of Poles Stock No B B B B M B B B M B BL.5, SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, NONLOCKING F F F B F F F F F B BL.5F, SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, CLOSED END WITH FLANGE, LOCKING F F M B B B B B B BL.5/270, SCREW CLAMP: CLAMPING YOKE, 270 ORIENTATION, NONLOCKING B B B B C B B B B BLZF.5, TENSION CLAMP, 180 ORIENTATION, NONLOCKING C C BLIDC.5F, IDC, 90 /180 ORIENTATION, WITH FLANGE, LOCKING C C C C C mm PITCH SOCKET BLOCKS BL-I/O.5 10/F series socket blocks allow the connection of 8 signal leads and 2 contacts for voltage feeding. I/O.5 10/FP series allow the connection of 8 signal leads, 2 contacts for voltage feeding and compact flanges for bolting the socket to the front of a device. These compact flanges are offset to allow socket blocks to nest for space savings. Wire size: AWG. Both series feature push-in spring clamp and 180 orientation. BL-I/O.5/10F SERIES WITH FLANGES, LOCKING Poles Voltage Current Stock No V 55H A * 24V 55H BL-I/O.5/10FP SERIES WITH OFFSET FLANGES, LOCKING V 55H A * 24V 55H BL-I/O.5 0/F series socket blocks allow the connection of 8 -wire sensors/actuators, integrated power distribution, and 6 jumpering contacts for voltage feeding/distribution. BL-I/O.5 10/FP series socket blocks allow the connection of 8 -wire sensors/actuators, integrated power distribution, 6 jumpering contacts for voltage feeding/distribution and compact flanges for bolting the socket connector to the front of the device. These compact flanges are offset to allow socket blocks to nest for space savings. Wire size: AWG. Both series feature push-in spring clamp and 180 orientation. BL-I/O.5/0F SERIES WITH FLANGES, LOCKING Poles Voltage Current Stock No V 55H A * 24V 17M BL-I/O.5/0FP SERIES WITH OFFSET FLANGES, LOCKING V 55H A * 24V 55H *With integrated LEDs (76184) BL-I/O.5/10F with Integrated LEDs BL-I/O.5/10FP with Integrated LEDs BL-I/O.5/0FP BL-I/O.5/0FP with Integrated LEDs BL-I/O.5/10F with Integrated LEDs BL-I/O.5/10FP with Integrated LEDs BL-I/O.5/0FP BL-I/O.5/0FP with Integrated LEDs 96

29 You Need. We Speed. Order Today. PLUG & SOCKET.81mm PITCH PIN HEADERS.81mm PITCH SOCKET CONNECTORS SL.81/90F, 90 SL.81/90F, 90 Fig. 1 BL.81/90, 90 BL.81/90, 90 SL.81/90G, 90 SL.81/90G, 90 Fig. 2 BL.81/90, 90 BL.81/90, 90 SL.81/180F, 180 SL.81/180F, 180 Fig. BL.81, 180 BL.81, SL.81/180G, 180 SL.81/180G, 180 These.81mm pitch pin headers complement the comprehensive.5mm pitch system and is ideal for high-density applications. Offered in 90 (horizontal) and 180 (vertical) orientations. Soldering pin length:.5mm. UL rated for 00V/8A. Color: Green. Also available in black; go online or call. Order socket blocks separately on pages SL.81/90F, SINGLE-ROW, 90 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING No. of Poles Stock No C C C C C C H C H SL.81/90G, SINGLE-ROW, 90 ORIENTATION, CLOSED-END, NONLOCKING C C C C C C H C H SL.81/180F, SINGLE-ROW, 180 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING C C C C C C H C H SL.81/180G, SINGLE-ROW, 180 ORIENTATION, CLOSED-END, NONLOCKING C C C C C C H C H (76180) Fig. 4 BL.81F, BL.81F, 180 Fig. 6 BL.81/270F, 270 BL.81/270F, 270 These.81mm pitch sockets complement the comprehensive.5mm pitch system and is ideal for high-density applications. Socket blocks, with clamping yoke connection, are available with 90, 180, or 270 cable entry angles. UL rated for 00V/8A. Clamping range: 0-16 AWG. Color: Green. Mate with.81mm pitch pin headers; order separately on this page. Also available in black; go online or call. BL.81/90, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, NONLOCKING No. of Fig. Poles Stock No C C K BL.81/90F, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING C C M C M M M C M BL.81 SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, NONLOCKING K M C K BL.81F SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, WITH FLANGE, LOCKING C C C C C C M C H Find more at 97

30 PLUG & SOCKET.81mm PITCH SOCKET CONNECTORS (CONT.) BL.81/270F, SCREW CLAMP: CLAMPING YOKE, 270 ORIENTATION, CLOSED-END WITH FLANGE, LOCKING No. of Fig. Poles Stock No H H H H H H H H H (76181) 5.00/5.08mm PITCH SOCKET CONNECTORS 98 BLZ 5.00/ BLZ 5.00/ BLZ 5.00/ BLZF 5.00/ BLT 5.08/180 BLZ 5.00/ BLZ 5.00/ BLZ 5.00/ BL 5.00/ BL 5.00/ BLZF 5.00/ BLT 5.08/180 BLIDC /180 BLIDC / /5.08mm PITCH SOCKET CONNECTORS (CONT.) 5.00mm and 5.08mm pitch nonlocking socket connectors offer free choice of wire connection style: clamping yoke, leaf spring, screw clamp, tension clamp, top-entry and IDC versions. Mate with 5.00 and 5.08mm pin headers; order separately, go online or call. BLZ, BLZF, BLT, and BLIDC series connectors are molded from black PBT material with a V-0 flammability rating. BL series connectors are molded from PA material with a V-2 flammability rating. Locking versions available; go online or call. BLZ 5.00, SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, NONLOCKING BLZ series socket connectors feature a gastight, vibration-resistant clamping yoke wire termination. UL rated for 00V, 15A, AWG. No. of Poles Stock No F F F B F B M B F C F F B BLZ 5.00/90, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, NONLOCKING No. of Poles Stock No F F F B F M F B F B F F BLZ 5.00/270, SCREW CLAMP: CLAMPING YOKE, 270 ORIENTATION, NONLOCKING Stock No F F M B F B F B F B F BLZ 5.08, SCREW CLAMP: CLAMPING YOKE, 180 ORIENTATION, NONLOCKING No. of Poles Stock No B B B B B B F M B B B B B BLZ 5.08/90, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, NONLOCKING No. of Poles Stock No M B M B M M

31 No Minimum Order Fees 5.00/5.08mm PITCH SOCKET CONNECTORS (CONT.) BLZ 5.08/90, SCREW CLAMP: CLAMPING YOKE, 90 ORIENTATION, NONLOCKING No. of Poles Stock No B B M B B B M BLZ 5.08/270, SCREW CLAMP: CLAMPING YOKE, 270 ORIENTATION, NONLOCKING No. of Poles Stock No B B B B B B M B B B B B BL 5.00/180, SCREW CLAMP: LEAF SPRING, 180 ORIENTATION, NONLOCKING BL series socket connectors feature a reliable leaf spring screw clamp wire termination for low-cost commercial applications. UL rated for 00V, 10A, AWG. No. of Poles Stock No M C C M M C C BL 5.08/180, SCREW CLAMP: LEAF SPRING 180 ORIENTATION, NONLOCKING No. of Poles Stock No C C C M M C M BLZF 5.00, TENSION CLAMP: 180 ORIENTATION, NONLOCKING BLZF series socket connectors feature time-saving tension clamp wire termination. UL rated for 00V, 10A, AWG. No. of Poles Stock No M K BLZF 5.08/180, TENSION CLAMP: 180 ORIENTATION, NONLOCKING No. of Poles Stock No C C C C C BLT 5.08/180, SCREW CLAMP: TOP CONNECTION, 180 ORIENTATION, NONLOCKING BLT series top-entry socket connectors allow screwdriver and wire access in the same plane for space restrictive applications. Feature a gastight screw clamp wire termination. UL rated for 00V, 15A, AWG. No. of Poles Stock No B B B B B B B /5.08mm PITCH SOCKET CONNECTORS (CONT.) 811 AND 821 SERIES SCREW CLAMP PLUGGABLE PC BOARD AND SOCKETS PLUG & SOCKET BLT 5.08/180, SCREW CLAMP: TOP CONNECTION, 180 ORIENTATION, NONLOCKING No. of Poles Stock No B C (5247) Plug Horizontal Socket 811 and 821 series 2-piece, plug-in terminal strips provide quick-connect and disconnect of PC board wiring. Available in horizontal or vertical configurations. All metal parts are recessed or enclosed in the insulating body to provide circuit protections and dead-front safety. Insulating housings are made of polyamide 6.6 and rated UL94V-0. Captive nickel-plated brass screws are secured against loosening. Contact springs and solder pins are tin-plated bronze. Rated 00V, 15A, 12 AWG. Additional pole configurations (2 to 24 poles), unmarked parts, and 5mm and 5.08mm leftand-right marked vertical plugs are available in both 811 and 821 series; go online or call. UL recognized, CSA certified, VDE approved. 811 SERIES 5.00mm SPACING 811 series plugs are black while 811 series sockets are available in black (listed in the table below) or gray (select gray by changing last digit in mfg. part no. from 1 to 0) and have 0.09 (1.00) square pins for (5.00) spacing. PLUGS RIGHT-ANGLE, MARKED 100- No. of Poles Stock No K K K K K K K K K K K F SOCKETS VERTICAL, UNMARKED F F F F F F F SOCKETS HORIZONTAL, UNMARKED F F F F F F F F F SERIES 5.08mm SPACING 821 series plugs and sockets have all of the features of the 811 series except available in gray only and have 0.09 (1.00) square pins for (5.08) spacing. PLUGS RIGHT-ANGLE, MARKED No. of Poles Stock No K K K K K Find more at 99

32 PLUG & SOCKET INTERFACE 811 AND 821 SERIES SCREW CLAMP PLUGGABLE PC BOARD TERMINAL BLOCKS AND SOCKETS (CONT.) 100- No. of Poles Stock No K K K K F SOCKETS VERTICAL, UNMARKED F F F F F F F SOCKETS HORIZONTAL, UNMARKED F F F F F F F (59886) 815 AND 825 SERIES 5 ANGLED MODULAR PC BOARD 5 angle wire entry ideal for limited-space applications. Modular 2- and -pole units assemble to form any pole configuration. Field wiring rated 00VAC, 20A, 12-22AWG; factory wiring 00VAC, 0A, 12-0AWG. Body is polyamide 6.6 rated UL94V-0. Clamping screws are dichromated steel. Clamping body is nickel plated copper alloy. Color: gray. UL recognized, CSA certified, VDE approved. Also available in 2- to 24-pole configurations, with or without insulating plate, with or without fixing bolt, and in marked or unmarked versions; go online or call for versions not listed below. 815 SERIES (5.00mm PIN SPACING) ANGLED ENTRY MODULAR TERMINAL BLOCK - UNMARKED WITHOUT INSULATING PLATE Poles Length Stock No mm 50F mm 50F mm 59K mm 59K mm 58K mm 58K SERIES (5.08mm PIN SPACING) ANGLED ENTRY MODULAR - UNMARKED WITHOUT INSULATING PLATE mm 59K mm 59K mm 41B mm 58K mm 58K (520) ST COMPACT CONNECTOR SYSTEM Coding Feature Eliminates Mismating Locking Feature Provides Secure Connections Strain Relief Avoids Loose Wires First-Make-Last-Break Ground Connection For User Safety Enclosed plug-and-socket connector system saves installation time and space when distributing power. Male and female thermoplastic housings provide a unique coding feature to eliminate mismating. Offers a locking feature for secure connections and strain-relief to avoid loose wires. The ground connection is first-make-last break providing safety to the user. Ideal for power distribution, motor and sensor wiring, modular lighting systems, custom cable assemblies, and test equipment connections. Tin-plated copper-alloy contacts and pins. Clamping screws are steel, zinc-plated and chromated for corrosion resistance. Each connection point is labeled to indicate power/signal/ground which prevents wiring errors. Color: gray. Additional colors also available; go online or call. UL recognized (00V, 20A, AWG), CSA certified, VDE approved. MALE CONNECTORS Poles L x W (mm) Stock No x 28 02M x 8 02M x 66 94B FEMALE CONNECTORS x 28 02M x 8 02M x 66 02M (6667) 10-POLE PLUG AND SOCKET CONNECTORS 20 A, 00 V, 12 AWG, 100 C Rail Mount, Panel-to-Panel or Cable-to-Panel 92mm x 4mm x 17mm (L x W x H) mated Numbered Poles Compact connectors with dead front design and coding facility. Phosphor bronze wire guards. Numbered poles. Polyamide 6.6 insulating body. Steel, zinc-plated, dichromated pressure screws. Coding bars are supplies in batches of 10 connected together. Description Stock No Socket 59K Plug 59K ACCESSORY (Sold in packages of 10) Coding Pin 44F (5228) SNAPTRACK CARD EDGE CONNECTOR ASSEMBLIES Panel mount 22-pin single-side straight and notched PC cards and 44-pin double side notched PC cards on (.96) centers. Convert edge connectors to screw terminal wiring. Assemblies hold Kluge cards. Mount to 2TK series SNAPTRACK system. Mfg. part no. 2M44PC also fits 2TKD seriessnap- TRACK system. Both SNAPTRACK systems ordered separately on page PCB Description Stock No. 22PCBL* 22-Pin Notched Card 16M PCL* 44-Pin Notched Card 16M M44PCL* 44-Pin Notched Card 16M *Connector: Elco 6022 (5195) (94668) 940

33 See More Online From 440+ Top Brands. INTERFACE FLAT CABLE CONNECTOR-TO- TERMINAL BLOCK INTERFACES TELCO CONNECTOR INTERFACE MODULES Feature 4-sided notched sockets to provide correct polarity connections. Rated 1A. System consists of gold over nickel-plated, 94V-0 thermoplastic header; gold over nickel-plated beryllium copper strain relief connector for 26-0 AWG solid, 28 AWG stranded wire range; AWG wire range terminal block with -48 screws. Fit 2TK and 2TDK series SNAPTRACK systems; order separately on page 910. Description Dim. C Stock No. 2M10FCL 10-Pin Header 1.50 (8.10) 16M M14FCL 14-Pin Header 2.10 (5.4) 16M M60FC 16-Pin Header 2.0 (58.42) 87F M20FCL 20-Pin Header 2.70 (68.58) 16M M26FCL 26-Pin Header.20 (81.28) 16M M4FCL 4-Pin Header 4.10 (104.14) 16M M40FCL 40-Pin Header 4.70 (119.8) 16M M50FCL 50-Pin Header 5.50 (19.70) 16M M60FC 60-Pin Header 6.50 (165.10) 87F M64FCL 64-Pin Header 6.70 (170.18) 16M (5194) Convert DIN standard connector or Telco connector to field wiring. UL94V-0 thermoplastic housing. Ready-towire terminals fit 12-22AWG wire. Fit 2TK2 and 2TKD series SNAPTRACK systems; order separately on page 910. TELCO SOCKET CONNECTOR INTERFACE MODULES Positions Dim. C Stock No. 2M50TELSL (144.78) 16M (5192) RI-IDC RAIL MOUNT IDC TRANSITION MODULES D-SUB CONNECTOR-TO- TERMINAL BLOCK INTERFACES Metal shielded male connector mates with EMI-RFI cable and screw position with grounding path to connector shell. Connectors gold over nickel-plated brass, with 94V-0 thermoplastic polyester housing and tin-plated shells. Wire range 12-22AWG. Mount 2TK, and 2TKD series SNAPTRACK systems; order separately on page 910. Dimensions Pins B C Stock No. 2M09DSML (26.92) 1.50 (8.10) 16M M15DSML (26.92) 2.10 (5.4) 16M (26.92).10 (78.74) 52K (26.92) 4.1 (109.47) 96K M50DSML (0.48) 5.9 (150.62) 02M (519) DIP SOCKETS-TO-SCREW TERMINAL BLOCK INTERFACES Rated 5A, 150V. Inner-machined contacts have gold over nickel plating; outer-machined brass contacts have tin over copper plating. M nickel-plated brass screws. Wire range: AWG. Fit 2TK and 2TKD series SNAPTRACK systems; order separately on page 910. Dimensions Pins A B C Stock No. 2M16DPL M (50.80) 2M24DPL (76.71) (26.67) (71.12) 16M (5191) RI-series modules feature four accessory pads per line for installation of potentiometers, resistors, diodes or DIP switches. Mount on TS 2 or T 5 rail, ordered separately on page 922. Tension clamps available; go online or call Pins Dim. T Stock No (50) 90F (65) 90F (85) 90F (105) 90F (120) 90F (150) 90F (175) 20M (182) 90F (524) RD SERIES D-SUB TRANSITION MODULES Designed to make point-topoint connection between discrete wire transition modules and D-sub, card edge, IDC, or DIP connectors. Tension clamps available; go online or call. PLUGS WITH JACK SCREWS Pins Dim. T Stock No (40) 90F (55) 90F (85) 90F (115) 90F (150) 17M SOCKETS WITH JACK SCREWS (40) 90F (55) 90F (85) 17M (115) 90F (150) 51F (5242) Find more at 941

34 INTERFACE TERMINALS & SPLICES DIN RAIL MOUNT MAINTENANCE OUTLETS 120VAC, 15A outlets in single and dual versions for mounting on TS5 and TS2 DIN rails. Ideal for use in control cabinets, power computers, test equipment, lights, power tools. Feed AC power to terminal block and tap output from both outlet and terminals for powering other devices. (61874) Description Stock No RS Simplex Single Outlet 17M RS Duplex Dual Outlet 14C DATA CABLE CONNECTOR-TO- TERMINAL BLOCK INTERFACES Terminal block accepts up to 12 AWG wire. Polarized and compatible with all systems. Length (perpendicular to rail) is 80mm. 5 x 7.5mm DIN (mfg. part no ) and 2 x 15mm DIN (mfg. part no ) mounting rails are available; go online or call. MALE FLAT CABLE WITH SHORT AND LONG LEVERS 1A, 2V Poles Width Stock No mm 02M mm 02M mm 02M mm 02M mm 51F mm 02M D-SUB TRAPEZOIDAL MALE CONNECTORS 1.5A, 2V mm 02M mm 02M D-SUB TRAPEZOIDAL FEMALE CONNECTORS 5A mm 02M mm 02M mm 02M (6950) M SOLDERLESS TERMINALS Fig. 1 Fig. 2 Fig. Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Color Codes: Yellow (26-24 AWG) Yellow (12-10 AWG) Yellow (4 AWG) Fig. 1 Fig. 14 Fig. 15 Red (22-18 AWG) Red (8 AWG) Blue (16-14 AWG) Blue (6 AWG) M SOLDERLESS TERMINALS (CONT.) NONINSULATED RING TONGUE TERMINALS FIG. 1 AWG Stud Size Length (L) of Stock No. R18-4C F R18-6C F R18-8C F R18-10C F R14-4C F R14-6C F R14-8C F R14-10C F R10-10L F R10-14L F VINYL INSULATED RING TONGUE TERMINALS FIG C C C C RV14-6C F C C C C RV10-6L H RV10-8L H RV10-10L F RV10-14L F RV10-516Q F NYLON INSULATED RING TERMINALS FIG. 2 AWG Stud Size Length (L) of Stock No H H H H H H H H VINYL INSULATED FORK TERMINALS FIG C C C C C NYLON INSULATED WITH INSULATION GRIP BLOCK FORK TERMINALS FIG. 4 BFV18-6C F BFV18-8C F BFV18-10C F BFV14-6C F BFV14-8C F BFV14-10C F BFV10-6L F BFV10-8L F BFV10-10L F NYLON INSULATED WITH INSULATION GRIP BLOCK FORK TERMINALS FIG. 4 AWG Stud Size Length (L) of Stock No H H H H H H H H H VINYL INSULATED LOCKING FORK TERMINALS FIG C C C C C

35 Find Datasheets & Tech Chat Online. M SOLDERLESS TERMINALS (CONT.) VINYL INSULATED LOCKING FORK TERMINALS FIG. 5 AWG Stud Size Length (L) of Stock No C C C NONINSULATED BUTT SPLICES FIG. 6 AWG Length (L) of Stock No. BS18C F BS14C F BS10L F VINYL INSULATED BUTT SPLICES FIG C C C NYLON INSULATED BUTT SPLICES FIG H H A H NONINSULATED FEMALE DISCONNECTS FIG. 8 Mate with male disconnects; order separately below. AWG Length (L) Size of Stock No. FD18-187C F FD14-187C F FD14-250C F VINYL INSULATED FEMALE DISCONNECTS FIG. 9 Mate with male disconnects; order separately below C C C C C FULLY-INSULATED NYLON FEMALE DISCONNECTS FIG. 10 Mate with male disconnects; order separately below C C H C C NONINSULATED MALE DISCONNECTS FIG. 11 Mate with female disconnects; order separately above. AWG Length (L) W x Thickness of Stock No. 71M x K M x K M x K M x K M x K VINYL INSULATED MALE DISCONNECTS FIG. 12 Mate with female disconnects; order separately above x C x C M P x E x C x C FULLY-INSULATED NYLON MALE DISCONNECTS FIG. 1 Mate with female disconnects; order separately above x C x C x C x C x C VINYL INSULATED SNAP PLUGS FIG. 14 Mate with snap receptacle; order separately below. AWG Snap Diameter Length (L) of Stock No. SPV18-156L F SPV14-156L F FULLY-INSULATED NYLON SNAP RECEPTACLE FIG. 15 Mate with snap plugs; order separately above C (81094) M HEAT-SHRINK RING TONGUE TERMINALS, BUTT SPLICES AND DISCONNECTS PIDG TERMINALS AND SPLICES (85705) TERMINALS & SPLICES Ring Tongue Terminal Butt Splice Corrosion-Resistant Improves Mechanical Performance Durable Heat-Shrink Tubing Resists Abrasion, Scoring and Cut-Through Heat-shrink, pre-insulated ring tongue terminals, butt splices and disconnects protect against the most challenging of environments. Versatile and easy to install just strip wires to appropriate length, insert wire into terminal and crimp, then apply heat with a recommended heat source. Sold in packages of 25. HEAT-SHRINK BRAZED-SEAM RING TONGUE TERMINALS AWG Stud SIze Length (L) Stock No. MH18-6R/LX M MH18-8R/LX M MH18-10R/LX M MH14-6R/LX M MH14-8R/LX M MH14-10R/LX M MH14-8RX / M MH14-516R/SX 5/ M MH14-14R/SX 1/ M MH10-8RX M MH10-10RX M MH10-8RX (BOX) / M MH10-14RX 1/ M HEAT-SHRINK FORK TERMINALS AWG Stud SIze Length (L) Stock No. MH18-6FLX M MH18-8FLX M MH18-10FLX M MH14-6FLX M MH14-8FLX M MH14-10FLX M MH10-8FLX M MH10-10FLX M MH10-14FLX 1/ M HEAT-SHRINK BUTT SPLICES AWG Length (L) Stock No. MH18BCX M MH14BCX M MH10BCX M HEAT-SHRINK DISCONNECTS All disconnects are Male tab is x 0.2. AWG Style Length (L) Stock No. MNHU18-250DFIX Female M MNHU14-250DMIX Male M MNHU10-250DFIX Female M MNHU10-250DMIX Male M (78552) Find more at 94

36 TERMINALS & SPLICES PIDG INSULATION- RESTRICTING RING TONGUE TERMINALS PIDG FASTON RECEPTACLES PIDG insulation-restricting ring tongue terminals meet MIL-T-7928, Type II, Class 1 and 2 requirements. UL listed, CSA certified for 105 C, 00V. (75870) 944 AWG Stud Size Stock No C H H H H H H B H H H H H H H H H C H H H H H B H H H H C C H B B B C H PIDG RADIATION- RESISTANT RING TONGUE TERMINALS PIDG radiation-resistant ring tongue terminals meet MIL-T-7928, Type II, Class 1 and 2 requirements. UL listed, CSA certified for 105 C, 00V. Sold in package quantities listed in table below. Mfg. Part Insulation Diameter in No. AWG Stud Size W x L (in.) (mm) of Stock No # x (.175) 1 16M # x (.175) 1 66H # x (.175) 1 16M # x (.175) C # x (.96) 1 16M # x (.96) 1 16M # x (.96) 1 7H # x (.96) 1 87K # x (.96) 1 22C # x ( 5.85) 1 16M (75871) PIDG FASTON RECEPTACLES All have dimple with wire stop, except (*): no dimple with wire stop. Fit Tab Width AWG of Stock No F F F F F F F F F F * F F * F * F F PIDG FASTON TABS (SOLD INDIVIDUALLY) x J x J x J (8572) PIDG RING TONGUE TERMINALS Closed Barrel Regular Wire Nylon Insulation with Insulation Support Insulation Diameter: (2.08mm) Copper with Tin Finish Voltage: 00VAC PIDG terminals and splices meet MIL-T-7928, Type II, Class 1 and 2 requirements. UL listed, CSA certified for 105 C, 00V. Order mfg. part no crimp tool separately on page 952. Sold in package quantities listed in table below. PIDG RING TONGUE TERMINALS AWG Stud Size Dimensions W x L (Inches) of Stock No / x H / x C / x H / x F / x F / x H / x F / x F / x H / x F / x F / x B # x H / x C / x F / x F # x H # x F # x F # x C # x H # x H # x F # x C # x B # x F # x F # x H # x B # x H # x C # x F # x F # x C / x H / x C

37 You Need. We Speed. Order Today. PIDG RING TONGUE TERMINALS (CONT.) AWG Stud Size Dimensions W x L (Inches) of Stock No / x F / x F / x F / x H # x C / x B / x H / x F # x H / x H / x H / x F / x F / x H / x H / x H # x H # x F / x H # x F # x F # x F # x B # x B # x H #6 0.4 x B #6 0.4 x C #6 0.4 x H # x H # x H # x H #8 0.4 x F #8 0.4 x F #8 0.4 x F /2 0.4 x H # x H # x B # x H # x F # x H # x F # x F # x C # x C # x C / x H / x F / x F / x H / x F / x F x F / x F / x F / x F / x F x H x H x F x F x H # x F # x H # x F # x F # x H # x F # x H # x F # x C # x C # x F # x F # x F TERMINALS & SPLICES PIDG RING TONGUE TERMINALS (CONT.) AWG Stud Size Dimensions W x L (Inches) of Stock No # x F # x H # x F # x C # x H # x F # x F # x F # x C # x H # x H # x C # x C # x F # x F # x F # x H x C HDSP x B # x C # x B # x B x F x F # x F # x F # x F # x F # x H # x F # x F # x F # x B # x H (85711) PIDG SPADE TONGUE TERMINALS Spade Tongue Flanged Spade Tongue Spring Spade Tongue Closed Barrel Regular Wire Nylon Insulation with Insulation Support Insulation Diameter: (2.08mm) Copper with Tin Finish Voltage: 00VAC PIDG terminals and splices meet MIL-T-7928, Type II, Class 1 and 2 requirements. UL listed, CSA certified for 105 C, 00V. Order mfg. part no crimp tool separately on page 952. Sold in package quantities listed in table below. PIDG SPADE TONGUE TERMINALS Insulation AWG Stud Size Dimensions W x L (Inches) Diameter (Inches) of Stock No # x C # x F # x F # x H # x F # x F # x H # x H # x C # x F # x F # x F # x F # x C # x F # x F Find more at 945

38 TERMINALS & SPLICES PIDG SPADE TONGUE TERMINALS (CONT.) Insulation Dimensions Diameter AWG Stud Size W x L (Inches) (Inches) of Stock No x F x F # x F # x F # x H # x H # x H # x F # x H # x F x C PIDG FLANGED SPADE TONGUE TERMINALS # x F # x F # x F # x F # x F # x F # x F # x F # x C # x F # x F x F x F x F # x H # x F # x F # x F # x F x H # x H x H PIDG SHORT SPRING SPADE TONGUE TERMINALS # x F # x F # x F # x F # x F # x F # x F # x F # x F # x F # x F # x F x F # x F PIDG LONG SPRING SPADE TONGUE TERMINALS / x B # x H # x H # x C # x H # x H # x H # x H # x F # x H # x H (85712) PIDG SPLICES Closed Barrel Regular Wire Nylon Insulation with Insulation Support Insulation Diameter: (2.08mm) Copper with Tin Finish Voltage: 00VAC Butt Splice Knife Disconnect PIDG splices meet MIL-T-7928, Type II, Class 1 and 2 requirements. UL listed, CSA certified for 105 C, 00V. Order mfg. part no crimp tool separately on page 952. Sold in package quantities listed in table below. PIDG BUTT SPLICES AWG Wire Diameter (Inches) of Stock No F F F F K F F PIDG KNIFE DISCONNECT SPLICES AWG Length (Inches) of Stock No F F F F F (85714) 500-PC. PIDG TERMINAL KIT Kit contains insulated PIDG ring and spade terminals, butt splices, and FASTON receptacles in wire sizes AWG. Available with or without SUPER CHAMP IV crimp tool. Packaged in heavyduty, metal storage case. (5545) Description Stock No Kit with Crimp Tool 87F Kit without Crimp Tool 87F PLASTI-GRIP TERMINALS AND SPLICES Fig. 1 Fig. 2 (94656) Fig. Fig. 4 Fig. 5 Closed Barrel Regular Wire Vinyl Insulation with Insulation Support Copper with Tin Finish Voltage: 600VAC Temperature Range: 90 C 946

39 No Minimum Order Fees PLASTI-GRIP TERMINALS AND SPLICES (CONT.) Designed for economical insulated electrical terminations in most commercial and many industrial applications. UL recognized to 600V; CSA certified, LR7 189 to 600V, 90 C maximum. NOTE: terminals and splices are stamped in accordance with MIL-T Order mfg. part nos , and crimp tools and die sets separately on page 952. Sold in package quantities listed in tables below. PLASTI-GRIP RING TONGUE TERMINALS FIG. 1 AWG Stud Size Dimensions W x L (in.) Insulation Diameter Inch (mm) of Stock No x (.55) F # x (.17) 1 66H # x (.56) 1 66H # x (.55) F # x (.55) 1 1H # x (.17) 1 66H # x (.17) 1 66H # x (.17) 1 14C # x (.55) 1 66H # x (.55) 1 71C # x (.55) F # x (.55) 1 66H # x (.55) F # x (.17) 1 66H # x (.17) 1 66H # x (.55) F # x (.55) F # x (.17) F # x (.55) 1 66H # x (.55) 1 66H # x (.55) F # x (.17) F # x (.55) F / x (.17) 1 66H / x (.56) 1 66H / x (.55) F / x (.55) F / x (.55) F # x (4.2) F #6 0.4 x (4.2) 1 66H # x (.55) F #6 0.4 x (4.2) F #8 0.4 x (.68) 1 66H # x (4.2) 1 66H #8 0.4 x (4.2) F # x (6.5) 1 1H # x (4.2) F # x (.68) F # x (4.90) 1 27C / x (.68) 1 66H / x (4.2) 1 66H / x (5.08) 1 1H / x (4.2) F / x (4.2) 1 46F / x (4.2) F / x (4.90) 1 66H # x (5.84) 1 66H # x (6.5) 1 66H # x (6.5) 1 66H # x (6.5) F # x (5.84) F # x (6.5) F / x (6.5) 50 96F / x (6.5) 1 66H / x (6.5) F / x (7.62) 1 18H / x (5.84) 50 96F / x (6.5) 50 96F / x (6.5) 50 96F /0 / x (16.89) 1 15H / x (17.7) 1 22C PLASTI-GRIP TERMINALS AND SPLICES (CONT.) Dimensions W x L (in.) TERMINALS & SPLICES Insulation Diameter Inch (mm) AWG Stud Size of Stock No # x (9.14) H # x (9.14) F # x (8.8) F / x (8.8) F / x (9.14) F / x (8.8) F / x (9.14) H / x (9.14) F / x (9.14) F # x (9.14) H # x (11.07) H # x (11.07) H / x (11.07) H / x (11.07) H / x (9.14) F / x (11.4) H / x (11.4) F / x (11.4) F # x (11.4) H / x (1.08) H / x (11.4) F / x (11.4) H / x (14.22) 1 2C / x (16.05) 1 92B / x (16.05) 50 58H / x (14.22) 1 92B PLASTI-GRIP SPADE TONGUE TERMINALS FIG. 2 Insulation AWG Stud Size Diameter Inch (mm) of Stock No # (.55) F # (.55) F # (.55) F # (.68) F # (4.2) F # (4.2) F # (5.84) F PLASTI-GRIP FLANGED SPADE TONGUE TERMINAL FIG # (.55) F # (.55) F # (.55) F # (4.2) F #6 0.2 (5.84) 50 96F #8 0.2 (5.84) 50 96F PLASTI-GRIP SPRING SPADE TONGUE TERMINAL FIG # (.55) F # (.55) F # (.55) F # (4.2) F # (4.2) 1 66H # (4.2) F # (4.2) F # (4.2) 1 66H #6 0.2 (5.08) 50 96F PLASTI-GRIP BUTT SPLICES FIG. 5 Dimensions W x L (in.) Insulution Diameter Inch (mm) AWG Stock No * (2.0) 96F (.05) 97F (.55) 52F (4.2) B * x F (5.84) 74C *Sold in pkg. of 100 (5540) Find more at 947

40 TERMINALS & SPLICES BUDGET RING TONGUE TERMINALS Terminal Body: Copper Per ASTM-B-152 Plating: Tin Per MIL-T Temperature Rating: 170 C Max. Sold in Packages in 100 AWG Stud Size Dimensions W x L Stock No x C x B x H x E x H x H x B x H x H x H x H x H x B x H x H x H x C x H x H / x H / x C / x H / x H x H x H x C x C x H x H / x H / x H x H x H x C x C x C / x H / x H / x H / x H / x H (75875) AMPLI-BOND RING TONGUE TERMINALS Straight and Right-Angle Configurations Insulation Material: Vinyl Terminal Body: Copper Per ASTM-B-152 Insulation Support Ring: Steel Per ASTM-A-109 Plating: Tin Per ASTM-B-545 Sold in Package Quantities Listed Below STRAIGHT FIG. 1 Fig. 1 Fig. 2 AWG Stud Size Dimensions W x L of Stock No # x F # x H # x H LL10000G 8 # x F # x H # x H # x H / x H TEMT881C 8 1/ x H / x H / x H AMPLI-BOND RING TONGUE TERMINALS (CONT.) Dimensions AWG Stud Size W x L of Stock No / x H # x H # x H / x H TSM / x H HLMP # x H / x H / x H / x H / x H / x H H11L1M 2 5/ x H / x H /0 / x F RIGHT-ANGLE FIG # x C / x H # x H / x H / x H / x H / x H / x H / x H / x H (7587) TERMINYL RING TONGUE TERMINALS Insulation Material: Nylon, Rated UL94V-2 Terminal Body: Copper Per ASTM-B-152 Plating: Tin Per ASTM-B-545 Temperature Rating: 105 C Max. Sold in Package Quantities Listed Below AWG Stud Size of Stock No #8 1 50F # H / H / H / H # H # F / H TSM / H / H # H # H # H / H / H /2 1 40C / H / H / H /0 1/4 1 67C /0 / H (75874) (9465) 948

41 See More Online From 440+ Top Brands. PRO-CRIMPER III HAND TOOL PRO-CRIMPER III tool frame requires less hand force to produce the same connection as comparable tools. With interchangeable die sets it can crimp many different types of connectors. Multiple terminal sizes are accommodated in one die. Has angled head for comfortable hand and wrist position. Ratchet control provides complete crimping cycle. Features emergency ratchet release and extra strong pivot pins for greater durability. Constructed of rugged high-carbon steel with cushioned handles. Various interchangeable die sets for the PRO-CRIMPER tool frame are available; go online or call. PRO-CRIMPER II Tool Frame Stock No With Die Set for Insulated Terminals and Splices, PIDG and 97F PLASTI-GRIP, AWG With Die Set for Hex Crimp 50-Ohm BNC/TNC Coaxial 50F Connectors, 58, 62, 59 RG/U With Die Set for D-Sub 20 DF Pin and Socket Contacts, 28-24, AWG 44F (8291) TERMINAL KITS CLOSED END SPLICES (CONT.) SOLISTRAND PARALLEL SPLICES Body Material: Copper Per ASTM-B-152 Plating: Tin Per MIL-T TERMINALS & SPLICES NYLON-MOLDED SPLICES ECN, EC AWG Insul. Color Splice Mark. of Stock No Clear ECN F Clear ECN F (5541) Mfg. part no piece PLASTI-GRIP terminal kit contains mfg. part no SUPER CHAMP crimp tool, 225 rings, 200 spades, and 75 butt splices in wire sizes AWG. Packaged in heavy-duty metal box. Mfg. part no piece PLASTI-GRIP and PIDG terminal kit contains PRO-CRIMPER II hand tool and 225 ring and spade terminals in wire sizes 12-10, 16-14, and AWG. Packaged in sturdy storage box. Description Stock No PLASTI-GRIP Kit with SUPER CHAMP Crimp Tool 87F PLASTI-GRIP and PIDG Kit with PRO-CRIMPER II Hand Tool 92F (5542) PRE-INSULATED SEALED BUTT SPLICES Pre-Insulated Sealed Body Insulation Material: Polyolefin Insulation Diameter: (4.2mm) Max. Body Material: Copper Plating: Tin BUTT SPLICES AWG of Stock No B B F CRIMP TOOL FOR BUTT SPLICES Description Stock No Crimp Tool (22-10 AWG) 92F (5467) Moistureproof seal prevents corrosion. Order mfg. part no crimp tool separately below. Butt Splice Sold in package quantities listed in table below. AWG of Stock No F H C C F C / F /0 1 66H / H /0 1 66H MCM 25 58H MCM 25 58H MCM 25 58H (75876) SOLISTRAND TERMINALS AND SPLICES CLOSED END SPLICES Fig. 1A Fig. 1B Fig. 1C Fig. 1D Fig. 2 VS, ECV Insulated with Non-Insulation Support Material: Copper ECN, EC Finish: Tin Voltage Rating: VS and ECN - 00V, ECV and EC - 600V For single and multiple wire applications. UL listed, CSA certified. VINYL BOMB-TAIL SPLICES VS, ECV AWG Insul. Color Splice Mark. of Stock No Red VS F Purple VS F Clear ECV 1 50F Purple VS F Purple ECV F Fig. Fig. 4 Fig. 5 Style A Standard Fig. 5 Style B Strap SOLISTRAND RING TONGUE TERMINALS Fig. AWG Stud Size of Stock No A / F A / F A / F A / F A H A B A # F A #4 1 50B Find more at 949

42 TERMINALS & SPLICES SOLISTRAND TERMINALS AND SPLICES (CONT.) Fig. AWG Stud Size of Stock No A #4 1 66H A #4 1 87F A # F A #6 1 66H A #6 1 92B A # F A #8 1 96B A # F A # F A # F A / F A /4 1 50F A / F A /16 1 B A / F A /8 1 1H A /2 1 0C A /2 1 66H A #4 1 50F A # F A #6 1 8C A #6 1 66H A # F A #8 1 7C A # F A # F A #10 1 B A # H A # H A # H A / F A /4 1 98F A / B A / F A / F A /2 1 05C A /2 1 50F A H A #4 1 99F A # F A #6 1 98F A #6 1 66H A # F A #8 1 08C A #8 1 67C A # F A #10 1 1H A # C A # H A # F A 8 5/ H A 6 1/ H A 6 1/4 1 92B A 6 5/8 1 97C A 4 5/ F A 4 1/2 1 92B A 4 / H A #4 1 9B B 4/0 1/ H B 4/0 1/ H B 4/0 5/ F B 4/0 5/ F B 4/0 / H B 4/0 / F B /0 1/ H B /0 5/ H B /0 / H B /0 / H B /0 7/ H B /8 1 1H B # C B 8 1/ F B 8 1/ F B 8 5/ F SOLISTRAND TERMINALS AND SPLICES (CONT.) Fig. AWG Stud Size of Stock No B 8 5/ C B 8 / F B 8 1/2 1 66H B 8 # F B 8 # F B 8 # F B 6 1/ F B 6 1/4 1 B B 6 5/ F B 6 / F B 6 # C B 6 # H B 4 1/ F B 4 1/4 1 90B B 4 5/ F B 4 / F B 4 / H B 4 # F B 4 # F B MCM 1/ H B MCM / H B 400 MCM 1/ H B 400 MCM / F B MCM 1/ F B MCM / F C 4/0 / F C 1/0 5/ H C 1/0 7/ H C 1/0 / F C 8 # F C 6 1/ H C 6 # F C 4 1/ H C 2 1/ H C 2 / H D 2/0 1/ F D 2/0 1/ F D 2/0 1/ F D 2/ F D 2/0 5/ H D 2/0 5/ F D 2/0 / F D 2/0 / F D 2/0 / H D 2/0 1/2 1 66H D 2/0 # F D 1/0 1/ F D 1/0 1/ H D 1/0 1/ H D 1/0 5/ F D 1/0 / F D 1/0 / F D 1/0 1/ F D 2 1/ H D 2 1/ H D 2 5/ H SOLISTRAND SPADE TONGUE TERMINALS Fig. AWG Stud Size of Stock No F # F # F # H #6 1 99F # F # F # F # H F # F #6 1 66H #8 1 66H #8 1 66H # F

43 Find Datasheets & Tech Chat Online. SOLISTRAND TERMINALS AND SPLICES (CONT.) SOLISTRAND SPADE TONGUE TERMINALS Fig. AWG Stud Size of Stock No # F #6 1 17H # H #4 1 66H #6 1 97B #8 1 15H # H #8 1 66H #6 1 66H #8 1 66H SOLISTRAND BUTT SPLICES Fig. AWG Style of Stock No B F B F A F A F D4BL-K B 1 50F A 50 96F A 50 96F A 25 96F SOLISTRAND DOUBLE BARREL TERMINALS Fig. AWG Style of Stock No F (556) ULTRA-FAST PLUS FASTON RECEPTACLES TERMINALS & SPLICES ULTRA-FAST FASTON RECEPTACLES AND TABS (CONT.) ULTRA-FAST FASTON FLAG RECEPTACLES Ins. Dia. AWG Mating Tab Max. Stock No x F x F x F x F x F ULTRA-FAST FASTON TABS Mating Ins. Dia. AWG Receptacle Max. Stock No x B x B HAND TOOLS FOR FASTON RECEPTACLES AND TABS Description Stock No. Price Each TETRA-CRIMP Hand Tool Frame 98F Die Set for AWG 98F Die Set for AWG 50F Die Set for AWG 9F (076) ULTRA-FAST FASTON RECEPTACLES AND TABS Receptacle Flag Receptacle Completely protected terminal and wire crimp with comparable electromechanical performance to open barrel F crimp Faston terminals. Receptacles, flag receptacles and tabs are preinsulated assemblies featuring housing molded from type 6 6 nylon material with a +125 C UL temperature rating. The Faston receptacles and tabs are recessed sufficiently within the housing to allow its use in 600V applications. Assemblies are color-coded by wire size: Violet AWG, Red AWG, Blue AWG, and Yellow AWG. Terminal base material is brass, except for mfg. part nos. with ( ) which denotes a phosphor Tab bronze terminal base. ULTRA-FAST FASTON RECEPTACLES Price AWG Mating Tab Ins. Dia. Max. Stock No. Each x or F x or F x or F x or F x F x F x F x F x F x F x F x F x F x F x F x F x F Offer all the advantages and conveniences of the standard ultra-fast product plus an insulation crimp. Assemblies are color-coded by wire size: Red AWG and Blue AWG. Tin-plated, copper alloy terminal with brass terminal base. Dimensions AWG Mating Tab B D Stock No x F x C x F x C x F x F HAND TOOLS FOR ULTRA-FAST PLUS FASTON RECEPTACLES Description Stock No TETRA-CRIMP Hand Tool Frame 98F Die Set for AWG 66F Die Set for AWG 66F (075) Ultra-Fast Plus Receptacle FULLY-INSULATED PIDG FASTON RECEPTACLES AWG Ultra-Fast Plus Receptacle AWG Tin-Plated Brass Body Full Nylon Insulation Provides Wire Support Allows Wire to Bend Without Fraying or Breaking the Conductor Mating Tab: x 0.02 (6.5 x 0.81) AWG Applications: power supplies, automotive, motors and instrumentation. UL recognized, CSA certified Find more at 951

44 TERMINALS & SPLICES FULLY-INSULATED PIDG FASTON RECEPTACLES (CONT.) AWG Stock No C C C (7117) HAND TOOLS FOR TERMINALS AND SPLICES Mfg. part no SUPER CHAMP multipurpose hand tool features wire stripper, cutter, and multiple crimping options. Ideal for stripping wire, cutting bolts and crimping insulated terminals and splices 12-10, 16-14, and AWG. Constructed of high-carbon, heat-treated steel with PVC cushion grips on handles. Description AWG Stock No PRO-CRIMPER II Hand Tool Frame with Die Set F PRO-CRIMPER II Die Set for Insulated Terminals and F Splices Crimp Tool F CERTI-CRIMP Hand Tool F PRO-CRIMPER II Hand Tool with Die Set for F FASTON 250 Series PRO-CRIMPER II Die Set for F FASTON 250 Series PRO-CRIMPER II Hand Tool with Die Set for F FASTON 250 Series PRO-CRIMPER II Die Set for F FASTON 250 Series TETRA-CRIMP Hand Tool F SUPER CHAMP Multipurpose Hand Tool C (554) Mfg. part no PRO-CRIMPER II hand tool frame, complete with mfg. part no interchangeable die set assembly, crimps PIDG and PLASTI-GRIP insulated terminals and splices 22-16, 16-14, and AWG. Features angled head for comfortable hand and wrist position. Ratchet control provides complete crimping cycle plus emergency ratchet release and extra strong pivot pins for greater durability. Constructed of rugged high-carbon steel with cushioned handles for comfort. Various interchangeable die sets fit into tool frame, including replacement die set mfg. part no , ordered separately below. Mfg. part no hand tool crimps pre-insulated sealed terminals and splices 22-18, 16-14, AWG. Mfg. part no CERTI-CRIMP hand tool with ratchet control provides a complete crimping cycle. Crimps SOLISTRAND terminals and splices 22-16, 16-14, and AWG. Features insulation crimp adjustment, a locator for proper terminal positioning and support, a wire stop, and color coding and/or wire information on the tool head or handles. Designed to exacting dimensions, requires minimum skill to operate, and is repairable. Suited for military, UL and CSA applications. Mfg. part no TETRA-CRIMP hand tool crimps PIDG and PLASTI-GRIP insulated terminals and splices 26-22, 22-16, 16-14, and AWG. Dies travel in arc-like path. Features multiple color-coded crimping cavities, terminal locator and wire stop, and ratchet control release. FULLY-INSULATED QUICK-DISCONNECTS (CONT.) AVIKRIMP FEMALE (STANDARD FLARE), TIN-PLATED BRASS CONTACT, NYLON INSULATED Insul. Color Wire Range (AWG) Accepts Tab Size Stock No C C Red H C C C Blue H C Yellow C INSULKRIMP FEMALE (STANDARD FLARE), TIN-PLATED BRASS CONTACT, PVC INSULATED InsulKrimp fully-insulated quick-disconnects are designed for dense packaging requirements (low profile height). Translucent see-through insulator provides for fast inspection. Features funnel entrance for increased crimping rates and wire stop in barrel to prevents insertion of over-stripped wires. UL listed, CSA certified H Red M H Blue H H Yellow H INSULKRIMP FEMALE, TIN-PLATED BRASS CONTACT, PVC INSULATED Blue C INSULKRIMP FEMALE COUPLER (EXPANDED FLARE), TIN-PLATED BRASS CONTACT, NYLON INSULATED Red H INSULKRIMP MALE COUPLER, ZINC-CHROMATE PLATED COPPER CONTACT, NYLON INSULATED Red C INSULKRIMP PIGGYBACK DUAL (STANDARD FLARE), TIN-PLATED BRASS CONTACT, NYLON INSULATED InsulKrimp piggyback dual disconnects are used when multiple connections are required and there is a limited number of tabs Red H Blue H Yellow H KRIMPTITE FEMALE, BUTTED SEAM, TIN-PLATED BRASS CONTACT, NONINSULATED C (5527) FULLY-INSULATED QUICK-DISCONNECT FLAGS Nylon Insulated Right Angle, Space Saving Design UL Listed, CSA Certified Sold in Packages of 100 Color Wire Range (AWG) Accepts Tab Size Stock No Red C Blue C Red C Blue C Yellow C (5529) FULLY-INSULATED QUICK-DISCONNECTS Sold in packages of 100 AVIKRIMP MALE (STANDARD FLARE), ZINC-CHROMATE PLATED COPPER CONTACT, NYLON INSULATED Avikrimp fully-insulated male and female quick-disconnects feature a secure metal support sleeve, superior strain relief, and smooth edges. Meets the double-crimp requirements of VDE and other DIN specifications. UL listed, CSA certified, TÜV approved. Insul. Wire Range Color (AWG) Accepts Tab Size Stock No H Red C C Blue C Yellow C STEP-DOWN BUTT SPLICES A Unique Problem Solver Perfect Solution When Going From 2-Wires-to-1 Great For Splicing Multiple Wires-to-1 UL listed, CSA certified Sold in Packages of 100 Wire Range (AWG) Insulation Color Stock No to Blue with Red Stripe 7C * to Noninsulated 55H to Yellow with Blue Stripe 29M to Red with Yellow Stripe 7C *Sold individually (552) Insulated 952

45 You Need. We Speed. Order Today. WINDOW BUTT SPLICES Convenient wire inspection window Color-coded nylon insulation Butted seam Tin-plated copper contact Wire Range (AWG) Mil. Spec. Insulation Color Length (In.) Max. Wire Insul. Dia. (In.) Stock No. Price Each M7928/5- Red H M7928/5-4 Blue H M7928/5-5 Yellow H (89548) Avikrimp FULLY-INSULATED QUICK-DISCONNECT FLAGS TÜV Approved, Meets DIN Specifications Provides a Double Crimp with Metal Strain Relief Patented Sold in Packages of 100 Color Wire Range (AWG) Accepts Tab Size Stock No Red C Blue C Red C Blue C Yellow C (5528) Avikrimp NYLON INSULATED QUICK-DISCONNECTS WITH VIBRATION-SUPPORT Tin-Plated Brass Construction with Closed Electrical Barrels Sold in Packages of 100 Available in loose piece and tape-mounted form; go online or call. Color AWG Accepts Tab Size Max. Wire Insulation Diameter Stock No Red x H Red x H Red x H Red x H Blue x H Blue x H Blue x H Yellow x H (7585) MULTI-LOCKS No special tools needed to make pigtail taps, parallel or in-line splices. Self-tapping, insulation displacement. Sold in packages of 100. Wire Range (AWG) Color Stock No Yellow 7C Blue 7C White 7C Red 7C WIRE TAPS Yellow 55H Blue 55H Red 55H (69849) Rated 00V max. Temperature range: -55 C to +105 C Sold individually SNAP PLUGS TERMINALS & SPLICES InsulKrimp (PVC INSULATION) AWG Crimp Tool # Max. Wire Insulation Dia. Stock No H H Avikrimp (NYLON INSULATION) H H (75854) InsulKrimp (PVC INSULATION) AWG Crimp Tool # Max. Wire Insul. Diameter Stock No H H Avikrimp (NYLON INSULATION) H H (75855) InsulKrimp Designed to SAE Specifications Can Be Connected and Disconnected Repeatedly SNAP RECEPTACLES InsulKrimp Designed to SAE Specifications Can Be Connected and Disconnected Repeatedly Perma-Seal TERMINALS Avikrimp Diameter: Sold in Packages of 100 Avikrimp Diameter: Sold in Packages of 100 Seals Out Corrosion Permanently Heavy-Duty Insulation Resists Abrasion and Contamination Waterproof Adhesive Seal UL Listed Sold in Packages of 100 RING TERMINAL Wire Range Stud (AWG) Color Size Stock No Red 8 7C Red 10 7C Red 1/4 9C Blue 10 7C Blue 1/4 7C Yellow 10 7C Yellow 1/4 7C SPADE TERMINAL Red 10 7C Blue 8 7C Blue 10 7C Yellow 8 28M BUTT SPLICE TERMINAL Red 7C Blue 7C Yellow 7C QUICK-DISCONNECT COUPLERS MALE Blue 1/4 54H Yellow 1/4 54H Find more at 95

46 TERMINALS & SPLICES Perma-Seal TERMINALS (CONT.) QUICK-DISCONNECT COUPLERS FEMALE Wire Range Stud (AWG) Color Size Stock No Red 1/4 54H Blue 1/4 54H Yellow 1/4 54H (6981) SNAP SPADE TERMINALS Copper Contact Contact Material Thickness: 0.02 Crimp Tool #: 1 Sold in Packages of 100 InsulKrimp (PVC INSULATION) AWG Stud Size Max. Wire Insul. Diameter Max. Width Stock No H H H H H H H H Avikrimp (NYLON INSULATION) H H H H M H H M H H H H (75856) RATCHET CONTROL CRIMP HAND TOOLS HEAVY-DUTY COPPER RING TERMINALS Flared barrel for easy wire insertion. Provide 100% conductivity. Sold in packages of 10 and 100. Wire Range (AWG) Stud Size of Stock No C / C / C /8 10 7C / C /8 10 7C /4 10 7C / C /8 10 7C / C /8 10 7C /2 10 7C / C /8 10 7C / M /0 5/ C /0 /8 10 7C /0 1/2 10 7C /0 5/ M /0 /8 10 7C /0 1/2 10 7C /0 5/ C /0 /8 10 7C /0 1/2 10 7C /0 / M /0 1/2 10 7C (69848) Avikrimp RING TERMINALS WITH STRAIN RELIEF Double crimp with metal strain relief. Easy tunnel entry with tough nylon insulation. Sold in packages of 100. Releases Only When Crimp Cycle is Completed, Providing Proper Crimp and Pull-Test Terminal Locator Included Long Handles Minimize Operator Fatigue Nested Tools Feature Interchangeable Die for Crimping Various Types of AWG Terminals Fig. Description Stock No Sealed Ring, Spade and Butt Splices 54H Sealed, AWG H AWG and J Splice 8 AWG 49H Butt Splice AWG 54H Flag Quick-Disconnect 01J Wire Pins AWG 2H Discrete Wire AWG 81H Butt Splice AWG 54H Splices AWG 79C Discrete Wire AWG 97H (75858) Fig. 1 Fig. 2 -Nested Wire Range (AWG) Max. Width (mm) Min. Clearance (mm) Max. Lgth. (mm) Stud Color Size Stock No Red C Red M Red C Blue 5/ C Red 1/ C Blue M Blue C Blue C Blue 1/ C Yellow 1/ H (69852) PVC (Insulkrimp ) RING TERMINALS Molded insulation provides funnel entry. Sold in packages of 100. (94640) Wire Range (AWG) Max. Width (mm) Min. Clearance (mm) Max. Lgth. (mm) Stud Color Size Stock No Yellow C Yellow H Yellow C Yellow 1/ C

47 No Minimum Order Fees TERMINALS & SPLICES PVC (Insulkrimp ) RING TERMINALS (CONT.) Wire Max. Min. Max. Range Stud Width Clearance Lgth. (AWG) Color Size (mm) (mm) (mm) Stock No Yellow 5/ C Yellow / C (6985) DELUXE INSULATED SOLDERLESS TERMINAL KIT PVC BUTT SPLICES Industry standard butt splices. Sold in packages of 100. Wire Range (AWG) Color Stock No Blue 7C Red 7C Yellow 7C (69850) Avikrimp BUTT SPLICES WITH STRAIN RELIEF Heavy-duty for high vibration applications. Double crimp with metal strain relief. Tough nylon insulation. Sold in packages of 100. Wire Range (AWG) Color Stock No Red 7C Blue 7C Yellow 7C (69851) CLOSED-END INSULATED SPLICES Molex Nylon Closed-End Connectors feature 2-piece construction. A translucent nylon-molded insulation is adhered to the metal connector insert. The connector s insert is annealed, Tin-plated, seamless, pure electrolytic, tough pitch Copper. Individual design and performance requirements dictate the use of Copper inserts. These connectors are all rated for a maximum of 600V AWG Stock No H H H H (89569) Kit contains variety of Molex ring terminals, spade terminals, hook terminals, and butt splice contacts and hand held crimp tool. pc Description 25 FEMALE Q.D. AVIKRIMP TAB.250X.02 (22-18)AWG 25 FEMALE Q.D. AVIKRIMP TAB.187X.020 (22-18)AWG 25 FEMALE Q.D. AVIKRIMP TAB.250X.02 (16-14)AWG 25 FEMALE Q.D. AVIKRIMP TAB.187X.020 (16-14)AWG 25 FEMALE Q.D. INSULKRIMP TAB.250X.02 (22-18)AWG 25 FEMALE Q.D. INSULKRIMP TAB.187X.020 (22-18)AWG 25 FEMALE Q.D. INSULKRIMP TAB.250X.02 (16-14)AWG 25 FEMALE Q.D. FLAG AVIKRIMP.250x.02 (22-18)AWG 25 FEMALE Q.D. FLAG AVIKRIMP.187X.020 (22-18)AWG 25 FEMALE Q.D. FLAG AVIKRIMP.250X.02 (16-14)AWG 25 FEMALE Q.D. FLAG INSULKRIMP.250x.02 (22-18)AWG 25 FEMALE Q.D. FLAG INSULKRIMP.250X.02 (16-14)AWG 25 FEMALE Q.D. FLAG INSULKRIMP.187X.020 (16-14)AWG 25 FEMALE Q.D. FLAG INSULKRIMP.250X.02 (12-10)AWG 25 PIGBACK INSULKRIMP DUAL SEX.250X.02 (22-18)AWG 25 FEMALE Q.D. AVIKRIMP TAB.110X.020 (22-18)AWG 25 FEMALE Q.D. AVIKRIMP TAB.187X.020 (22-18)AWG 25 FEMALE Q.D. AVIKRIMP TAB.250X.02 (16-14)AWG SNAP PLUG INSULKRIMP (16-14)AWG 25 BUTT SPLICE (22-18)AWG INSULKRIMP 25 STEPDOWN BUTT BLUE/RED STRIPE (22-14)AWG 25 CLOSED-END SPLICE NYLON (22-12)AWG 25 SPADE TONGUE AVIKRIMP #(5-6)STUD (16-14)AWG 25 SPADE TONGUE AVIKRIMP #(5-6)STUD (22-18)AWG 25 CRIMPER INSUL/NON INSUL (10-22)AWG Description Stock No. WMX-100 Solderless Insulated Terminal Deluxe Kit - 601pcs. 5K (85055) VOLTREX BRAND CRS SERIES RING TONGUE TERMINALS Avikrimp SPADE TERMINALS WITH STRAIN RELIEF Double crimp with metal strain relief. Easy funnel entry with tough nylon insulation. Sold in packages of 100. Wire Range (AWG) Max. Width (mm) Min. Clearance (mm) Max. Lgth. (mm) Stud Color Size Stock No Red C Red C Blue C Blue C Blue C Yellow M Yellow M Yellow C Yellow 1/ C (69854) Wire guide barrel for excellent electrical and mechanical connections. 1-pc. burr-free construction for maximum electrical conductivity. Electro-tin plating for maximum corrosion resistance. Constructed of pure electrolytic (ETP) copper, annealed to relieve stress points and provide maximum installed strength. Barrel-to-pad transition designed to minimize flexing and bending. Multiple V grooves in barrel give maximum holding power and current flow. Insulation is molded vinyl or nylon. Molded flange for accurate location of crimp tool. Open-end design permits visual inspection of wire location before and after crimping. Made in the U.S.A. UL recognized, CSA certified, OSHA compliant. Sold in package quantities indicated below. STYLE TO NONINSULATED BUTTED SEAM BARREL AWG Stud Size Color of Stock No #0 CRS-TO N #4 CRS-TO N #6 CRS-TO N #4 CRS-TO-1804* 100 1N #6 CRS-TO-1806* 100 1N #8 CRS-TO-1808* 100 1N #10 CRS-TO-1810* 100 1N CRS-TO-1825* 100 1N #6 CRS-TO-1406* 100 1N #8 CRS-TO-1408* 100 1N #10 CRS-TO-1410* 100 1N CRS-TO-1425* 100 1N #6 CRS-TO-1006* 50 1N #10 CRS-TO-1010* 50 1N CRS-TO-1025* 50 1N CRS-TO-107* 50 1N STYLE ZO NONINSULATED BRAZED SEAM BARREL #6 CRS-ZO-1806* 100 1N #8 CRS-ZO-1808* 100 1N (94645) Find more at 955

48 TERMINALS & SPLICES VOLTREX BRAND CRS SERIES RING TONGUE TERMINALS (CONT.) STYLE ZO NONINSULATED BRAZED SEAM BARREL AWG Stud Size Color of Stock No #6 CRS-ZO-1406* 100 1N #8 CRS-ZO-1408* 100 1N #10 CRS-ZO-1410* 100 1N #8 CRS-ZO-1008* 50 1N #10 CRS-ZO-1010* 50 1N CRS-ZO-1025* 50 1N #10 CRS-ZO N CRS-ZO N CRS-ZO N CRS-ZO N #10 CRS-ZO N CRS-ZO N CRS-ZO N CRS-ZO N SPC N STYLE TV VINYL-INSULATED BUTTED SEAM BARREL #6 Red CRS-TV N #8 Red CRS-TV N #10 Red CRS-TV N Red CRS-TV N #6 Blue CRS-TV N #8 Blue CRS-TV N #10 Blue CRS-TV N Blue CRS-TV N #6 Yellow CRS-TV N #8 Yellow CRS-TV N #10 Yellow CRS-TV N Yellow CRS-TV N Yellow CRS-TV N Yellow CRS-TV N STYLE ZV VINYL-INSULATED BRAZED SEAM BARREL #6 Red CRS-ZV N #8 Red CRS-ZV N #6 Blue CRS-ZV N #8 Blue CRS-ZV N #10 Blue CRS-ZV N Blue CRS-ZV N #6 Yellow CRS-ZV N Crimp tool reference: *CTT ; CTT ; +CTT ; order separately on page 960 (5557) VOLTREX BRAND RING TONGUE TERMINALS Meet UL 486H, UL listed (file E58918), CSA certified (file LR22190M6) except mfg. part nos. with suffix (+). Sold in package quantities indicated below. NYLON-INSULATED BARREL AWG Stud Size Color of Stock No. 8 #10 Red CRS-ZY N Red CRS-ZY N Red CRS-ZY N Red CRS-ZY N #10 Blue CRS-ZY N Blue CRS-ZY N Blue CRS-ZY N NYLON-INSULATED SURE GRIP BARREL AWG Stud Size Color of Stock No #4 Red CRS-DY-1804* 100 1N #6 Red CRS-DY-1806* 100 1N #8 Red CRS-DY-1808* 100 1N #10 Red CRS-DY-1810* 100 1N Red CRS-DY-1825* 100 1N #6 Blue CRS-DY-1406* 100 1N #8 Blue CRS-DY-1408* 100 1N #10 Blue CRS-DY-1410* 100 1N VOLTREX BRAND RING TONGUE TERMINALS (CONT.) AWG Stud Size Color of Stock No #8 Yellow CRS-DY-1008* 50 1N #10 Yellow CRS-DY-1010* 50 1N Yellow CRS-DY-1025* 50 1N Crimp tool reference: *CTT ; order separately on page 960. (5521) VOLTREX BRAND HIGH- TEMPERATURE TERMINALS Temperature rating: 900 F. Sold in packages of quantities indicated below. HIGH-TEMPERATURE RING TONGUE TERMINALS Fig. 1 AWG Stud Size of Stock No #4-6 CRS-TO-1806-HT N #8-10 CRS-TO-1810-HT N #4-6 CRS-TO-1406-HT N #8-10 CRS-TO-1410-HT N # CRS-TO-1425-HT N #4-6 CRS-TO-1006-HT 50 81N #8-10 CRS-TO-1010-HT 50 81N # CRS-TO-1025-HT 50 81N HIGH-TEMPERATURE SPADE TONGUE TERMINALS Fig #8-10 CSS-TO-1810-HT N #8-10 CSS-TO-1410-HT N #8-10 CSS-TO-1010-HT 50 81N HIGH-TEMPERATURE BLOCK SPADE TONGUE TERMINALS Fig #4-6 CBS-TO-1806-HT N #4-6 CBS-TO-1406-HT N HIGH-TEMPERATURE FEMALE QUICK-DISCONNECT TERMINALS Fig. 4 Male Tab AWG W Dim. L of Stock No. CFS-TO-1418-HT N HIGH-TEMPERATURE FEMALE FLAG QUICK-DISCONNECT TERMINALS Fig. 5 CFL-TO-1425-HT N HIGH-TEMPERATURE MALE QUICK-DISCONNECT TERMINALS FIG. 6 CMS-TO-1425-HT N HIGH-TEMPERATURE BUTT SPLICE TERMINALS Fig. 7 AWG of Stock No. CCS-TO-1414-HT N CCS-TO-1010-HT N (5468) VOLTREX BRAND SPADE (FORK) TONGUE TERMINALS Mfg. part nos. CBS-TO and CSS-TO are noninsulated butted seam terminals for use where special characteristics are not required. Mfg. part no. CBS-ZO noninsulated brazed seam terminals allow crimp at any location on barrel. Seam is silver brazed and can not open under crimping or operating pressure. Mfg. part nos. CBS-TV and CSS-TV vinyl insulated terminals with wire guide barrel consists of butted seam with flared, rigid PVC sleeve. Flexure occurs over wide area on the wire insulation rather than at juncture. Funnel shaped sleeve guides wire strands into barrel. Mfg. part no. CBS-ZV vinyl insulated brazed seam terminals with wire guide barrel have same features as mfg. part no. CBS-TV terminals plus the advantage of the brazed seam over the butted seam. Mfg. part nos. CBS-DY and CSS-DY nylon insulated terminals with sure-grip wire guide barrel consist of a butted seam with flared seamless brass sleeve covered with a flared injection molded nylon sleeve. Made in the U.S.A. UL recognized, CSA certified, OSHA compliant. Sold in package quantities listed below. AWG Stud Size Color of Stock No. CBS-TO # N SPC # N

49 See More Online From 440+ Top Brands. VOLTREX BRAND SPADE (FORK) TONGUE TERMINALS (CONT.) AWG Stud Size Color of Stock No. CBS-TO # N SPC89* # N SPC896* # N CBS-ZO-1806* # N CBS-TV-1804* #4 Red 100 1N CBS-TV-1806* #6 Red 100 1N SPC676* #6 Red N CBS-TV-1808* #8 Red 100 1N SPC677* #8 Red N CBS-TV-1810* #10 Red 100 1N CBS-TV-1406* #6 Blue 100 1N SPC679* #6 Blue N CBS-TV-1408* #8 Blue 100 1N SPC680* #8 Blue N CBS-TV-1410* #10 Blue 100 1N CBS-ZV-1806* #6 Red 100 1N SPC69* #6 Red N CBS-ZV-1808* #8 Red 100 1N CBS-ZV-1810* #10 Red 100 1N CBS-ZV-1406* #6 Blue 100 1N CBS-ZV-1408* #8 Blue 100 1N CBS-ZV-1410* #10 Blue 100 1N CBS-DY-1804* #4 Red 100 1N CBS-DY-1806* #6 Red 100 1N CBS-DY-1808* #8 Red 100 1N CBS-DY-1406* #6 Blue 100 1N CBS-DY-1408* #8 Blue 100 1N CBS-DY-1410* #10 Blue 100 1N CBS-DY-1006* #6 Yellow 100 1N CBS-DY-1010* #10 Yellow 100 1N CSS-TO-2204* # N CSS-TO-2206* # N SPC668* #8 Red N CSS-TV-1008* #8 Yellow 50 1N CSS-TV-1010* #10 Yellow 50 1N SPC701* #6 Red N Crimp tool reference: *Mfg. part no. CTT ; Mfg. part no. CTT ; +Not UL recognized (549) TERMINALS & SPLICES VOLTREX BRAND BUTT SPLICE TERMINALS Made in the U.S.A. UL recognized (file E58918), CSA certified (file M), OSHA compliant. Sold in packages of quantities indicated below. NONINSULATED BUTTED SEAM BARREL AWG Color of Stock No. CCS-TO-1818* N CCS-TO-1414* N NONINSULATED BUTTED SEAM PARALLEL BARREL CCP-TO-1818* N NONINSULATED SEAMLESS PARALLEL BARREL CCP-ZO-1414* N CCP-ZO-1010* N VINYL-INSULATED BUTTED SEAM BARREL CCS-TV Red 100 1N CCS-TV Blue 50 1N VINYL-INSULATED BRAZED SEAM OR SEAMLESS BARREL CCS-ZV Red 100 1N CCS-ZV Blue 50 1N CCS-ZV Yellow 50 1N NYLON-INSULATED SURE-GRIP BARREL CCS-DY Red 50 1N CCS-DY Yellow 50 1N NYLON-INSULATED SEAMLESS BARREL CCS-ZY Red N CCS-ZY Blue N CCS-ZY Yellow N Crimp tool reference: *CTT ; CTT ; **CTT ; order separately on page 960. (5561) VOLTREX BRAND QUICK-DISCONNECT TERMINALS VOLTREX BRAND SNAP-ON SPADE TERMINALS Multiple V Grooves for Maximum Holding Power and Minimum Resistance Wire Guide Barrel Eliminates Strand Hangups Nonslip Insulation for Ease of Positioning Crimp Tool Funneled Insulation Beveled Terminal Mouth for Easy Wire Insertion Maximum Corrosion Protection, Installation Strength, Flexing Resistance Mfg. part no. CLS-TV vinyl-insulated terminals feature a butted seam barrel. Use mfg. part no. CTT crimp tool; order separately. Go online or call. Made in the U.S.A. UL recognized, CSA certified, OSHA compliant. Sold in packages of 100 and NONINSULATED AWG Stud Size of Stock No. CLS-TO # N VINYL-INSULATED CLS-TV # N CLS-TV # N CLS-TV # N CLS-TV # N CLS-TV # N CLS-TV # N CLS-TV # N CLS-TV #6 50 1N CLS-TV #8 50 1N CLS-TV # N CLS-TV /4 50 1N (5440) Made in the U.S.A. UL listed, CSA certified, except mfg. part nos. CFS-TO-1412, CFS-TV-1412, CFS-DY-1412 and CMS-TO Sold in package quantities indicated below. STYLE TO FEMALE NONINSULATED BUTTED SEAM BARREL AWG Tab Width of Stock No. CFS-TO-1818* N CFS-TO-1825* N CFS-TO-1418* N CFS-TO-1425* N STYLE TV FEMALE VINYL-INSULATED BUTTED SEAM BARREL AWG Tab Width of Stock No. CFS-TV N CFS-TV N CFS-TV N CFS-TV N CFS-TV N STYLE DY FEMALE NYLON-INSULATED SURE GRIP BARREL AWG Tab Width of Stock No. CFS-DY N CFS-DY N STYLE TO MALE NONINSULATED SLIDE-BUTTED SEAM BARREL AWG Tab Width of Stock No. CMS-TO N STYLE TV MALE VINYL-INSULATED BUTTED-SEAM BARREL AWG Tab Width of Stock No. CMS-TV N CMS-TV N CMS-TV N Find more at 957

50 TERMINALS & SPLICES VOLTREX BRAND QUICK-DISCONNECT TERMINALS (CONT.) STYLE DY MALE NYLON-INSULATED SURE GRIP BARREL AWG Tab Width of Stock No. CMS-DY N CMS-DY N STYLE TF FEMALE FULLY NYLON-INSULATED BUTTED-SEAM BARREL AWG Tab Width of Stock No. CFS-TF N CFS-TF N CFS-TF N CFS-TF N CFS-TF N STYLE DF FEMALE FULLY NYLON-INSULATED SURE GRIP BARREL AWG Tab Width of Stock No. CFS-DF N CFS-DF N CFS-DF N STYLE TF MALE FULLY NYLON-INSULATED BUTTED-SEAM BARREL AWG Tab Width of Stock No. CMS-TF N CMS-TF N CMS-TF N CMS-TF N CMS-TF N STYLE DF MALE FULLY NYLON-INSULATED SURE GRIP BARREL AWG Tab Width of Stock No. CMS-DF N CMS-DF N CMS-DF N CMS-DF N CMS-DF N MALE SNAP PLUG NYLON-INSULATED WITH INSULATION GRIP, 0.19 Barrel Length AWG W L I.D. Insul. Dia. of Stock No. CBP-DY N CBP-DY N FEMALE SNAP RECEPTACLE NYLON-INSULATED W/ INSULATION GRIP, 0.25 Barrel Length AWG W L I.D. Insul. Dia. of Stock No. CBR-DY N CBR-DY N Crimp tool reference: *CTT ; CTT ; CTR-100-IT (550) VOLTREX BRAND HEAT- SHRINK CRIMP CONNECTORS VOLTREX BRAND HEAT-SHRINK CRIMP CONNECTORS (CONT.) RING TONGUE TERMINALS Fig. AWG Description of Stock No #6 Stud Size N #8 Stud Size N #10 Stud Size N #6 Stud Size N #8 Stud Size N #10 Stud Size N Stud Size N Stud Size N #10 Stud Size N Stud Size N Stud Size N #6 Stud Size N #8 Stud Size N #10 Stud Size N #6 Stud Size N #8 Stud Size N #10 Stud Size N Stud Size N Stud Size N #10 Stud Size N Stud Size N Stud Size N FORK TONGUE TERMINALS #4 Stud Size N #6 Stud Size N #10 Stud Size N #8 Stud Size N #10 Stud Size N #10 Stud Size N #6 Stud Size N #10 Stud Size N #8 Stud Size N #10 Stud Size N #10 Stud Size N QUICK-DISCONNECTS Tab Male 955* N Tab Male 956* N Tab Male 957* N Tab Male 1674* 25 92N Tab Male 1675* 25 92N Tab Male 1676* 25 92N Tab Female 958* N Tab Female 959* N Tab Female 960* N Tab Female 1677* 25 92N Tab Female 1678* 25 92N Tab Female 1679* 25 92N BUTT SPLICES Length Red N Length Blue N Length Yellow N Length Red N Length Blue N Length Yellow N *Not UL listed or CSA certified (5516) Fig. 1 Fig. 2 Fig. Fig. 4 Fig. 5 Heat-shrink connectors are environmentally sealed by a heat-shrinkable insulation that is pre-installed on the component. As the polyolefin tubing shrinks, an adhesive lining seals out contaminants and provides strain relief for the wire connection. These parts are reliable and easy to install. Each connection can be visually inspected through the translucent insulation. The heat-shrink tubing is corrosion and abrasion resistant and is ideal where corrosive fumes or liquid contaminants are present. Heat-shrink crimp connectors are made using seamless butt splices and brazed seam ring and fork tongue terminals. Nylon fully insulated quick-disconnects are butted seam. UL listed file E141071, CSA certified. Sold in packages of 25 and 100. (94650) 958

51 Find Datasheets & Tech Chat Online. TERMINALS & SPLICES VOLTREX BRAND HEAT-SHRINK CRIMP AND SOLDER CONNECTORS VOLTREX BRAND 500-PC. INSULATED SOLDERLESS TERMINAL KITS (CONT.) Stock No N Mfg. part no. 647 kit contains 25 each of 20 different kinds of quick-disconnect terminals including both male and female noninsulated, vinyl-insulated, and fully nylon-insulated styles. For wire gauge sizes 22-18, and Plus a crimp tool and a convenient identification chart in the lid of a durable metal storage case. Stock No N (4089) Easy to install heat-shrink crimp and solder butt connectors. Available in clear, red, blue and yellow. Order crimp tools separately below. Made in the U.S.A. Sold in packages of 100 and 25. AWG Length Color of Stock No Clear SPC C Red SPC C Blue SPC C Yellow SPC C Clear SPC C Red SPC C Blue SPC C Yellow SPC C CRIMP TOOLS Description AWG Stock No. SPC11945 Multipurpose Crimp Tool for Insulated Terminals C SPC11946 Ratchet Crimp Tool C (7822) VOLTREX BRAND HEAT-SHRINK SOLDER CONNECTORS Heat-shrink solder connectors are made with a low temperature solder and require no crimping. Solder connectors provide greater mechanical strength and superior conductivity. UL recognized (file E141071) and CSA certified (file ). Made in the U.S.A. Sold in packages of 25 and 100. AWG Description of Stock No Length Clear N Length Red N Length Blue N Length Yellow 97 84N Length Clear N Length Red N Length Blue N Length Yellow N (6859) VOLTREX BRAND 500-PC. INSULATED SOLDERLESS TERMINAL KITS Mfg. part no. 648 kit contains 25 each of 20 different kinds of solderless terminals including snap spade tongue, pin, ring tongue, block spade tongue and wire butt splices. Feature vinyl-insulated and fully insulated styles. For wire gauge sizes 22-18, and Plus a crimp tool and a convenient identification chart in the lid of a durable metal storage case. VOLTREX BRAND SOLDERLESS AND SOLDER TERMINAL KITS UL Recognized, CSA Certified, OSHA Compliant 840-QD 00-PC. QUICK-DISCONNECT KIT Mfg. part no. 840-QD kit contains 25 each of the 12 most popular quick-disconnect terminals including both male and female vinyl- and fully-insulated styles. For wire gauge sizes and Plus a crimp tool and a convenient identification chart in the lid of a durable plastic storage case. Description Stock No. 840-QD 00-pc. Quick Disconnect Kit 2N PC. VINYL-INSULATED TERMINAL KIT Mfg. part no. 840-TV kit contains 25 each of the 12 most popular vinyl-insulated terminals including ring tongue, block spade, wire splice, spade tongue and quick-disconnect styles. For wire gauge sizes 22-16, and Plus a crimp tool and a convenient identification chart in the lid of a durable plastic storage case. Description Stock No. 840-TV 00-pc. Vinyl-Insulated Terminal Kit 1N PC. SURE GRIP TERMINAL KIT Mfg. part no. 840-DY kit contains 25 each of the 12 most popular Sure-Grip terminals including ring tongue, quick-disconnect and block spade tongue styles. For wire gauge sizes 22-18, and Plus a crimp tool and a convenient identification chart in the lid of a durable plastic storage case. Description Stock No. 840-DY 00-pc. Sure Grip Terminal Kit 1N PC. NONINSULATED TERMINAL KIT Mfg. part no. 840-TO kit contains 25 each of the 12 most popular noninsulated terminals including ring tongue, quick-disconnect, block spade tongue and wire butt splice styles. For wire gauge sizes 22-18, and Plus a crimp tool and a convenient identification chart in the lid of a durable plastic storage case. Description Stock No. 840-TO 00-pc. Noninsulated Terminal Kit 1N PC. HEAT-SHRINK CRIMP CONNECTOR KIT Mfg. part no heat crimp connector kit contains 50 ring tongue terminals, 15 fork tongue terminals, 0 butt splices, and 20 fully-insulated male and female quick disconnects. For wire gauge 20-18, and Crimp connectors insulated with heat-shrink tubing. Packaged in a durable plastic storage case. Description Stock No pc. Heat-Shrink Crimp Connector Kit 92N PC. HEAT-SHRINK SOLDER CONNECTOR KIT Mfg. part no heat-shrink solder connector kit contains 15 ring tongue terminals, 15 fork tongue terminals, 10 butt splices and 8 pieces of 1 adhesive-lined heat-shrink tubing for wire gauge Solder connectors are insulated with heat-shrink tubing. Packaged in a durable plastic storage case. Description Stock No pc. Heat-Shrink Solder Connector Kit 92N (5515) 647, 648 (94656) Find more at 959