POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )
|
|
- Martha Holmes
- 6 years ago
- Views:
Transcription
1 POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free
2 WAGO BENEFITS Using springs instead of screws is the key to WAGO s success. The POWER CAGE CLAMP provides the appropriate clamping force for conductors up to 2, 2/0, 4/0 AWG and 350 kcmil (35, 50, 95 and 185 mm 2 ). The Latest and Largest Member of our High-Current Family Connects: For more information visit 1/0 to 350 kcmil 310 A Up to 1000 VAC/DC 2
3 Suitable for Every Application Meets the most stringent requirements, including those specified for railway and marine applications. Heat- and cold-resistant even under the heaviest of loads Always Reliable Optimum clamping force independent of operator skill 100% reliable with vibration-proof, thermal cycling resistant, gas-tight connections Fast Termination Easy to Use Side conductor entry Orange locking tab keeps the clamp open for hands-free wiring Industry s widest range of accessories to get the job done Eliminate time-consuming preparation no ring terminals or ferrules required No expensive torque wrenches or calibration required Up to 60% faster than wiring with screw terminal blocks Vibration-Proof Fast Maintenance-Free No retightening of screws wire it once and forget it 3
4 OUR POWER TEAM Terminate Conductors up to 350 kcmil (185 mm 2 ) with Just One Turn Grounding Green/yellow terminal blocks easily identify ground function Metal snap-on mounting foot ensures the proper ground connection without the use of screws. Continuous Marking Strip Marking Marking Tags Continuous marking strip installed with a quick swipe of the thumb Marking tags installed individually above the orange locking tab Marking carrier supplements the use of tag and strip marking Conductor Termination Rotate the operating tool counterclockwise to the stop!. Next, push in the orange locking tab for hands-free wiring. Insert a stripped conductor until it hits the backstop. Hold in this position. A short counterclockwise rotation " releases the tab. The operating tool then rotates clockwise, securely clamping the conductor. 4
5 Safety Protective Warning Covers Provides visual indication for high-voltage applications and prevents access to conductor clamping mechanism as well as built-in test point Finger Guards Yellow, detachable shock protectors for unused jumper slots or conductor entries Power Tap (for 2 AWG 350 kcmil) Easy to install, space saving power tap, with marking tag holder, allows for convenient power distribution to additional loads Commoning Testing For 2 AWG Convenient push-in adjacent jumper allows for easy potential commoning. Independent jumper slots allow continuous commoning beyond two terminal blocks. For 2/0, 4/0 and 350 kcmil Comb style jumper provides convenient potential commoning. Dual jumper slot allows for max rated conductor no conductor size derating required.. Via Step-Down Jumpers with TOPJOB S Push-in, step-down jumper offers easy power distribution from 2 AWG (POWER CAGE CLAMP ) to 20-4 AWG ( Series TOPJOB S terminal blocks). Easy troubleshooting via 4 mm Ø touch-proof test plug. Use a test plug adapter ( ) for 2 AWG terminal blocks. 5
6 285 SERIES 2 AWG (35 mm 2 ) 2/0 AWG (50 mm 2 ) Conductor cross-section 10 2 AWG (6 35 mm 2) 10 2 AWG (6 35 mm 2 ) 8 2/0 AWG (10 50 (70 f-st ) mm 2 ) Rated voltage/current 600 V, 115 A U 600 V, 115 A V, 125 A EN 600 V, 115 A U 600 V, 115 A V, 125 A EN 600 V, 150 A U 600 V, 150 A V, 150 A EN Terminal block width Strip length 16 mm/0.63 in. L 25 mm/0.98 in. 16 mm/0.63 in. L 25 mm/0.98 in. 20 mm/0.79 in. L 30 mm/1.18 in. Image Item Numbers through terminal block Only suitable for DIN 35 x 15 rails ground terminal block / Only suitable for DIN 35 x 15 rails; 2.3 mm thick through terminal block Only suitable for DIN 35 x 15 rails Accessories Adjacent jumper (l N 85 A) (l N 150 A for 1 jumper, l N 130 A for 2 4 jumpers) Step-down jumper (l N 90 A) Power tap (1x AWG) (600 V, 30 A U / 800 V, 32 A EN) (2x AWG) (600 V, 30 A U / 1000 V, 41 A EN) Warning cover Finger guard Operating tool (type 3, 5.5 x 0.8 mm screwdriver blade) (Allen-wrench) Marking Accessories Marking strips (plain, white, 11 mm wide, 50 m reel) (plain, white, 11 mm wide, 50 m r Requires use of marker carrier WMB Inline markers (plain, white, 1500 markers, stretchable mm) (plain, white, 1500 markers, str WMB Multi marking system (plain, white, 10 strips with 10 markers per card, stretchable mm) (plain, white, 10 strips with 10 m stretchable mm) Marker carrier
7 4/0 AWG (95 mm 2 ) 350 kcmil (185 mm 2 ) 8 2/0 AWG (10 50 (70 f-st ) mm 2 ) 4 4/0 AWG (25 95 mm 2 ) 4 4/0 AWG (25 95 mm 2 ) 1/0 AWG 350 kcmil ( mm 2 ) 1/0 AWG 350 kcmil ( mm 2 ) 600 V, 150 A U 600 V, 150 A V, 150 A EN 600 V, 200 A U 600 V, 200 A V, 232 A EN 600 V, 200 A U 600 V, 200 A V, 232 A EN 1000 V, 310 A U 1000 V, 310 A V, 353 A EN 1000 V, 310 A U 1000 V, 310 A V, 353 A EN 20 mm/0.79 in. L 30 mm/1.18 in. 25 mm/0.98 in. L 35 mm/1.38 in. 25 mm/0.98 in. L 35 mm/1.38 in. 32 mm/1.26 in. L mm/ in 32 mm/1.26 in. L mm/ in ground terminal block / Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper through terminal block Only suitable for DIN 35 x 15 rails ground terminal block / Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper through terminal block * 1 Only suitable for DIN 35 x 15 rails ground terminal block / * 1 Only suitable for DIN 35 x 15 rails; 2.3 mm thick, copper (l N 232 A for 1 jumper, l N 192 A for 2 4 jumpers) (l N 309 A for 1 jumper) (2x AWG) (600 V, 50 A U / 1000 V, 57 A EN) (1x AWG) (600 V, 50 A U / 1000 V, 57 A EN) (Allen-wrench) (Allen-wrench) eel) (plain, white, 11 mm wide, 50 m reel) Requires use of marker carrier (plain, white, 11 mm wide, 50 m reel) etchable mm) (plain, white, 1500 markers, stretchable mm) (plain, white, 1500 markers, stretchable mm) arkers per card, (plain, white, 10 strips with 10 markers per card, stretchable mm) (plain, white, 10 strips with 10 markers per card, stretchable mm) These items have hazardous locations approvals - IECEx, ATEX, UL, Class 1, Zone 0 For more technical data, see our Full Line Catalog, Volume 1, or visit * Pending 7
8 WAGO 350 kcmil BLOCK WITH MOUNTING FLANGES WAGO s 350 kcmil (185 mm²) high-current, rail-mounted terminal blocks are also available with mounting flanges for direct installation on a sub-panel or mounting plate. This version shares the same accessories with the 350 kcmil rail-mount terminal blocks. For more information visit 8
9 Versions for functional ground in gray-yellow housing Nominal current: 310 A Rated voltage: up to 1000 VAC/DC Mount a 350 kcmil terminal block directly onto the plate via screw-type flanges. Vibration-Proof Fast Maintenance-Free 9
10 INSTALLATION 1. First, insert block-to-block connectors ( ) into housing slots. 2. Then, connect and align the terminal blocks. 3. Secure the terminal block to a mounting plate using two M8 cylinder-head screws and appropriate washers. The Panel Mount Version is the Newest Edition to our POWER CAGE CLAMP family, offering: The same reliable, vibration-proof, and maintenance-free connection as the DIN-rail mount POWER CAGE CLAMP 10
11 285 SERIES WITH MOUNTING FLANGES 350 kcmil (185 mm²) Conductor cross-section Rated voltage/current Terminal block width Strip length 1/0 AWG 350 kcmil ( mm 2 ) 1000 V, 310 A U 1000 V, 310 A V, 353 A EN pending 32 mm/1.26 in. L mm/ in. 1/0 AWG 350 kcmil ( mm 2 ) 1000 V, 310 A U 1000 V, 310 A V, 353 A EN 32 mm/1.26 in. L mm/ in. Image Item Numbers through terminal block with screw flanges through terminal block with screw flanges / * 1 Accessories Adjacent jumper (l N 309 A for 1 jumper) Power tap (2x AWG) (600 V, 50 A U / 1000 V, 57 A EN) Block-to-block connector IMAGE? Warning cover Finger guard Operating tool Marking Accessories Marking strips (plain, white, 11 mm wide, 50 m reel) WMB Inline markers (plain, white, 1500 markers, stretchable mm) WMB Multi marking system (plain, white, 10 strips with 10 markers per card, stretchable mm) 1 These items have hazardous locations approvals - IECEx, ATEX, UL, Class 1, Zone 0 For more technical data, see our Full Line Catalog, Volume 1, or visit * Pending 11
12 WAGO Corporation N120 W19129 Freistadt Road Germantown, Wisconsin Telephone: 800 / DIN Rail ( ) Fax: 262 / info.us@wago.com Canada WAGO Corporation Tel. 800/DIN Rail ( ) Fax 262/ Mexico WAGO Corporation Queretaro Tel. 001/800/309/ /442/221/5946 Fax + 52/442/221/ WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbh. Copyright WAGO Kontakttechnik GmbH & Co. KG all rights reserved. The content and structure of the WAGO Websites, catalogs, videos, and other WAGO media are subject to copyright. The dissemination or changing of the content of these pages and videos is not permitted. Furthermore, the content may neither be copied nor made available to third parties for commercial purposes. Also subject to copyright are the images and videos that were made available to WAGO Kontakttechnik GmbH & Co. KG by third parties / MM² POWER CC 1.1 US 09/2016 Printed in the United States Subject to design changes
POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 )
POWER CAGE CLAMP High-Current Terminal Blocks for Conductors up to 350 kcmil (185 mm 2 ) vibration-proof fast maintenance-free WAGO BENEFITS Using springs instead of screws is the key to WAGO s success.
More informationELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks
ELECTRICAL INSTALLATION PRODUCTS Splicing Connectors and Chassis Mount Terminal Blocks 221 SERIES LEVER-NUTS The Next Generation of Compact Splicing Connectors 221 SERIES LEVER-NUTS The Difference is Clear:
More informationThrough and Ground Conductor Terminal Blocks 290 Series
11 474 Through and Ground Conductor Terminal Blocks 290 Series 0.34-1. mm"f-st" 0.31-1 mm"s" 1 00 V/6 kv/3 2 1 AWG 22-16"f-st" AWG 22-18"s" I N 13. A Terminal block width mm / 0.197 in 0.34-1. mm"f-st"
More informationSwitching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
More informationWINSTA The Connection System. Full Line Catalog 2010/2011
WINSTA The Connection System Full Line Catalog 2010/2011 5 WAGO Registered Trademarks CAGE CLAMP CAGE CLAMP @ POWER CAGE CLAMP FIT CLAMP PUSH WIRE TOPJOB TOPJOB @ WINSTA WAGO X-COM X-COM @ JUMPFLEX TO-PASS
More informationEPSITRON Electronic Circuit Breakers Compact and Precise ECBs for DC Circuits
EPSITRON Electronic Circuit Breakers Compact and Precise ECBs for DC Circuits WHY SECONDARY-SIDE FUSE PROTECTION? On the secondary side, switchedmode power supplies provide DC voltage to control circuit
More informationReflow Technology Product Overview
Reflow Technology Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
More informationPrintview: 4-channel analog input module; 4-20 ma; Single-ended - Item No.:
Printview: 4-channel analog input module; 4-20 ma; Single-ended - Item No: 70-4 4-channel analog input module; 4-20 ma; Single-ended Item No: 70-4 4-channel analog input module; 4-20 ma; Single-ended Marking
More informationOperating tools. with partially insulated shaft Type 1, 2 and 3 in set
Accessories 40 Accessories 41 Operating Tools 42 45 Operating Tools WINSTA 46 47 Disconnection Tools 48 Cable Strippers 500 Wire Strippers 501 Cable Cutters 502 Crimping Tools 502 503 Test and Measurement
More informationJUMPFLEX 857 Series ma ma V. Signal Conditioning/Relay and Solid State Modules
JUMPFLEX Series Signal Conditioning/Relay and Solid State Modules...0 V 0...0 ma...0 ma JUMPFLEX Series Today s factory automation and process control applications require conversion, isolation, and transmission
More information8-channel digital input module; 24 VDC; 3.0 ms; high-side switching; 1-conductor connection
Printview: 8-channel digital input module; 24 VDC; 30 ms; high-side switching; -conductor connection - Item No: 70-430 8-channel digital input module; 24 VDC; 30 ms; high-side switching; -conductor connection
More informationEPSITRON Advanced Power Supply System Innovations
EPSITRON Advanced Power Supply System Innovations EPSITRON COMPACT POWER Technical Data L H W Item Number 787-1202 787-1212 Nominal input voltage 100... 240 VAC 100... 240 VAC Input voltage range 90...
More informationMULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
More informationCurrent and Energy Measurement Technology Efficiency Is That Easy! Product Overview
Current and Energy Measurement Technology Efficiency Is That Easy! Product Overview Content WAGO Energy Management 4 Current Transformers Selection Guide 8 Power and Energy Measurement 10 Voltage Taps
More informationPHOENIX CONTACT
Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode
More informationPHOENIX CONTACT
Selective circuit breaker CLIPLINE Data sheet 100464_en_05 PHOENIX CONTACT 2009-11-17 1 Description The electronic circuit breaker, which has a design width of just 12.5 mm, selectively protects all 24
More informationQ-Zone Hoop-Frame. Assembly Instructions. Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8
Q-Zone Hoop-Frame Assembly Instructions Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8 Table of Contents Table of Contents... i Warranty... ii Parts List Box 1...iii Box 2...
More informationSockets. SU Series: DIN Rail Snap-Mount Sockets. F-6 USA: (800) 262-IDEC or (408) , Canada: (888) 317-IDEC ➀➁➄➅ ➁➂➃➄
SU Series: DIN Rail Snap-Mount SU Series: DIN Rail Snap-Mount SUS-L SUS-L -blade DIN-mount/surface mount -blade DIN-mount/surface mount Spring clamp terminals Spring clamp terminals - AWG - AWG 0A A (using
More informationREC Series Rack Installation Guide
REC Series Rack Installation Guide 1 REC Series Rack Installation Guide TABLE OF CONTENTS SECTION SAFETY WARNINGS 1 600 WIDE EXPLODED VIEW 2 800 WIDE EXPLODED VIEW 3 SWITCHING DOOR HANDING 4 STABILIZING
More informationM14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)
M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM
More informationM14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL. West Springfield, MA Phone: (866) FAX: (413)
M14 MODULAR CHASSIS SYSTEM (MOD 1) INSTRUCTION MANUAL Troy Industries, Inc. WWW.TROYIND.COM West Springfield, MA 01089 Phone: (866) 788-6412 FAX: (413) 383-0339 Thank You M14/M1A MODULAR CHASSIS SYSTEM
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions 10 5.2 mm m 0.205 in spacing 53 2.09" 26.7 1.05" 3 4 5 6 7 8 9 10 Save space by connecting s up to 4 mm2 (CB certified) 12 AWG in
More informationBrochure. SNK series Terminal blocks Screw technology
Brochure SNK series Terminal blocks Screw technology SNK series Terminal blocks Screw technology Rely on our expertise ABB screw clamp technology benefits from years of experience. Billions of our screw
More informationMCR-SL-CUC Universal current transducer. Data sheet _en_05. 1 Description
Universal current transducer Data sheet 104059_en_05 PHOENIX CONTACT 2011-03-09 1 Description MCR-SL-CUC-...-I and MCR-SL-CUC-...-U active current transducers convert DC, AC, and distorted currents into
More informationMANUAL e130. Wallstation
MANUAL 07.29.13 e130 Wallstation The Enovate Medical e130 Wallstation was designed to set a new standard in quality. Enovate Medical s goal is to provide a wallstation that is ready for years of use,
More informationHARTING Han GND. People Power Partnership
98 42 937 0201 HARTING Han GND People Power Partnership Han GND - Mateable Potential Equalization The new Han GND series now enables pluggable grounding systems Han GND (Han Ground) is the innovative HARTING
More informationData sheet. W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationThree-phase monitoring relay CM-PFS
Data sheet Three-phase monitoring relay CM-PFS The CM-PFS is a three-phase monitoring relay that is used to monitor three phase mains for incorrect phase sequence and phase failure. All devices are available
More informationInstall the Housing. Installation Instructions for Entra Round or Square Type IC, Air-tight New Construction Adjustable LED Housing EN3_-LH9_ 1.
Installation Instructions for Entra Round or Square Type IC, Air-tight New Construction Adjustable LED Housing 90ENTRA EN_-LH9_. LED - ROUND/ SQUARE GENERAL PRODUCT I NFORMATION: This product is safety
More informationOPERATOR S MANUAL Model 77E Pneumatic Cable Stripper
110 Fairgrounds Drive P.O. Box 188 Manlius, NY 13104-0188 USA 315.682.9176 FAX: 315.682.9160 OPERATOR S MANUAL Model 77E Pneumatic Cable Stripper PRODUCTION WIRE PROCESSING EQUIPMENT Website: www.carpentermfg.com
More informationTools for crimp contacts
Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered
More informationThe series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties.
w TERMINALS SERIES IK6 GENERAL INFORMATION The series terminals are state of the art based on technical enhancements, changes in power engineering, their applications and properties. 402 Since series terminals
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationVoltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages The CM-ESS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationTapping Screw (W/Flange) 46 Cord Armor 47 Tube (D) 48 Cord. 45 Cord Clip. Tapping Screw (W/Flange) 10 Gear Cover Ass'y. 12 Socket (B) Ass'y
W8VB The exploded assembly drawing should be used only for authoized service center. W8VB Item No. Part time 1 Magnetic Hex. Socket 2 Sub Stopper 3 O-Ring (S-16) 4 Locator (A) 5 Lock Sleeve (A) 6 O-Ring
More informationCurrent monitoring relays CM-SRS.2 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 For single-phase AC/DC currents The CM-SRS.2 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationVdc 9 to 30 (unregulated) and 5 ±0.5 (regulated) Supply voltage
NRH280DP dual output no contact rotary sensor PERFORMANCE Measurement range 20 to 360 in 1 increments Supply voltage 9 to 30 (unregulated) and 5 ±0.5 (regulated) Over voltage protection Up to 40 (-40 to
More informationSTOP. V00029AC Rev. 04 READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID TOOL LIST. NET-ACCESS S-Type Network Cabinets
Rev. 04 STOP READ ALL OF THE FOLLOWING INSTRUCTIONS BEFORE REMOVING CABINET FROM SKID NET-ACCESS S-Type Network Cabinets -Phillips screwdriver -Flatblade screwdriver -22mm socket wrench -15mm socket wrench
More informationElectronic Circuit Breaker with reset input ESS20-1..
Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and
More informationMKKDSH 3/ 2. Extract from the online catalog. Order No.:
Extract from the online catalog MKKDSH 3/ 2 Order No.: 1721045 The illustration shows a 2-position version PC terminal block, Nominal current: 24 A, Nom. voltage: 250 V, Pitch: 5 mm, Number of positions:
More informationABM International, Inc.
ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket
More informationThree-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41
Data sheet Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41 The three-phase monitoring relays CM-PSS.x1 monitor the phase parameters phase sequence, phase failure as well as over- and undervoltage.
More informationHE Insert Series. Application Specification Apr 26 th, 2016 Rev. A. Table of contents
HE Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationThree-phase monitoring relays CM-PVS.81
Data sheet Three-phase monitoring relays CM-PVS.81 The three-phase monitoring relay CM-PVS.81 monitors the phase parameters phase sequence, phase failure as well as over- and undervoltage. The device is
More informationDigital Input Output Module 24 V for Ex n Zone 2 Series 9472/35
www.stahl.de > 16 channels can be adjusted in pairs as digital inputs or outputs > Suitable for NAMUR proximity switches, 3-wire PNP proximity switches, contacts and solenoid valves (24 V / 0.5 A). > Up
More informationAluminum Frame Type Instruction Manual
Aluminum Frame TypeInstruction Manual Thank you for selecting our product. Before starting installation, please read this manual thoroughly to ensure correct installation. Please keep this manual at hand
More informationVoltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages
Data sheet Voltage monitoring relay CM-EFS.2 For single-phase AC/DC voltages The CM-EFS.2 is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationEPSITRON Electronic Circuit Breakers For Secondary Side DC Protection
EPSITRON Electronic Circuit Breakers For Secondary Side DC Protection WHY SECONDARY-SIDE PROTECTION? Switched-mode power supplies provide secondary side DC voltage to control circuits and loads such as
More informationPHOENIX CONTACT - 09/2009
Electronic miniature circuit-breaker CLIPLINE Data sheet 03906_en_0 PHOENIX CONTACT - 09/2009 Description The EC-E... electronic miniature circuit-breaker selectively protects all 24 V DC load circuits
More informationV-Groover SIMPLEX INSTRUCTION AND OPERATION MANUAL M O DEL 703. For best results use only authentic Logan blades.
www.logangraphic.com SIMPLEX M O DEL 703 INSTRUCTION AND OPERATION MANUAL For best results use only authentic Logan blades CAUTION: BLADES EXTREMELY SHARP Use replacement blades #1258 Logan Graphic Products,
More informationElectronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-WBS.22 Impulse generating and flashing with 2 c/o (SPDT) contacts The CT-WBS.22 is a multifunctional electronic timer from the CT-S range. It provides 10 timing functions
More information.00025" PER CLICK. As you turn the adjustment screw you should be able to feel a click. Each click will change the part diameter.00025".
ULTRA PRECISION DIAMETER ADJUSTMENT.00025" PER CLICK The ultra precision diameter adjustment is extremely accurate, as well as, quick and easy to use. The adjustment mechanism is spring loaded to take
More informationData sheet. W-Series WDU 4 BL
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationHand Crimp Tool Operating Instruction And Specifications Sheet Order No Eng. No. RHT 7050 (Replaces )
RHT7050 Hand Crimp Tool Hand Crimp Tool Operating Instruction And Specifications Sheet Order No. 64001-0900 Eng. No. RHT 7050 (Replaces 19285-0053) FEATURES Œ Œ Œ A full cycle ratcheting hand tool ensures
More informationTHIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
LumeLEX 2026 SERIES INSTALLATION INSTRUCTIONS Important THIS SHEET CONTAINS IMPORTANT SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS. Warning This product must be installed in accordance with National Electrical
More informationPreference Collection 5580 Treatment Console INSTALLATION GUIDE
Preference Collection 5580 Treatment Console INSTALLATION GUIDE 0 WARNING Failure to install the 5580 as described in this installation guide may cause the unit to collapse, resulting in serious injury
More informationThree-phase monitoring relays CM-PVS CM-PVS.31, CM-PVS.41 and CM-PVS.81
Data sheet Three-phase monitoring relays CM-PVS CM-PVS.31, CM-PVS.41 and CM-PVS.81 The three-phase monitoring relays CM-PVS.x1 monitor the phase parameters phase sequence, phase failure as well as over-
More informationData sheet. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationN. 15th Street, Middlesboro, KY FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP DUMP BODY INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Dump Body tarping system. With tarping systems
More informationFeed-through terminal block - PT 10-TWIN
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationData sheet... W-Series WDU 2.5
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationBulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
More informationLAN Locker Adjustable Shelves
Adjustable Shelves LAN LOCKER ADJUSTABLE SHELVES * Adjustable Shelves are available for LAN LOCKER widths: 24, 30, 48, 60, and 72. * When installing more than one Adjustable Shelf, it is recommended that
More informationCloset Carousel Installation Instructions. Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
Tools Required: Phillips Screwdriver (#2) Adjustable Wrench Level Tape Measure Utility Knife Electric Drill Drill Bits for Anchors Ladder (4 foot) Models TKA 5 Through TKA 14 Equipped with Footswitch Controls
More informationBulletin 1492 Spring-Clamp Connection Terminal Blocks Introduction
Bulletin Introduction The Allen-Bradley Line of Spring-Clamp Terminal Blocks The Bulletin -L line of internationally approved spring-clamp IEC-style terminal blocks offers a variety of products that can
More informationINSTALLATION: D1-NOTCH DRYWALL TRIM FLANGE
T F W 604.549.979 604.549.9555 fluxwerx.com INSTALLATION: D1-NOTCH DRYWALL TRIM FLANGE fixture housing endcap kit optic kit join kit notch 2 cross section notch 4 cross section 4 4" 4-11/2" 4 /8 (111)
More informationElectronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.23 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.
More informationData sheet. W-Series WDU 2.5 RT
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationREFLOW TECHNOLOGY. Product Overview
REFLOW TECHNOLOGY Product Overview THR COMPONENT REQUIREMENTS THR Components Components for THR (Through-Hole Reflow) soldering must withstand higher temperatures than those found in standard wave soldering.
More informationCOPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire)
Product Facts Bar Crimp Technique Terminals and Splices for aluminum-to-aluminum and aluminum-to-copper stripped wire applications Terminates stripped, stranded and solid (round or rectangular) aluminum
More informationInstalling flat panels on the MPL15 wall mount
Installing flat panels on the MPL15 wall mount The MPL15 (DS-VW775) is a full-service video wall mount that can accommodate tiled LCD panels with up to a 400 x 400 mm VESA pattern in portrait and landscape
More informationINSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System
INSTALLATION RECOMMENDATIONS For The Con-Tech ODYSSEY Line Voltage Flexible Track System IMPORTANT SAFETY INSTRUCTIONS: Read all instructions before installation. Save these instructions for later use.
More informationElectronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-AHS.22 OFF-delayed with 2 c/o (SPDT) contacts The CT-AHS.22 is an electronic timer from the CT-S range with OFF-delay and 10 time ranges. All electronic timers from the CT-S
More informationLiquid level monitoring relay CM-ENS.2x
Data sheet Liquid level monitoring relay CM-ENS.2x The CM-ENS.2x is served to regulate and control liquid levels and ratios of mixtures of conductive fluids. It can be used for overflow protection, dry
More information7878 K940. Checkpoint Antenna. Kit Instructions. Issue B
7878 K940 Checkpoint Antenna Kit Instructions Issue B Revision Record Issue Date Remarks A July 7, 2009 First issue B Nov2013 Revised the Checkpoint installation procedures for 7878 and 7874 scanners Added
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationVoltage monitoring relays CM-ESS.M For single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages The CM-ESS.M is an electronic voltage monitoring relay that provides reliable monitoring of voltages as well as detection of
More informationma. JUMPFLEX 857 Series. Transducers / Relay and Optocoupler Modules
0 0 ma 0 V...0 ma JUMPFLEX Series Transducers / Relay and Optocoupler Modules JUMPFLEX Series A Complete Product Line is Available, Bringing Each Signal into Shape. The perfect match of housing and electronics
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationTorqueMaster Replacement Spring
TorqueMaster Replacement Spring Installation Instructions NOTE: Use these installation instructions in conjunction with the TorqueMaster Repair / Replacement Spring Program literature. Copyright 999 Wayne-Dalton
More informationHand Crimp Tool Operating Instruction Sheet and Specifications Part No Eng. No. RHT 2749-CC (Replaces )
FEATURES Hand Crimp Tool Operating Instruction Sheet and Specifications Part No. 64001-5200 Eng. No. RHT 2749-CC (Replaces 19285-0025) A full cycle ratcheting hand tool ensures complete crimps Long handles
More informationSMKDS 2,5/ 2-5,08. Extract from the online catalog. Order No.:
Extract from the online catalog SMKDS 2,5/ 2-5,08 Order No.: 1705469 The illustration shows the 3-position version. PC terminal block, Nominal current: 20 A, Nom. voltage: 250 V, Pitch: 5.08 mm, Number
More informationCurrent monitoring relays CM-SRS.M1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.M1 For single-phase AC/DC currents The CM-SRS.M1 is an electronic current monitoring relay that monitors single-phase mains (DC or AC) for over- and undercurrent
More informationMultiples EM_ 1.4. Install 1X1/1X2/1X3/1X4 Housings. Installation Instructions for. This product is suitable for indoor locations.
Installation Instructions for 90EMULTI Multiples EM_. GENERAL PRODUCT I NFORMATION: This product is suitable for indoor locations. This product can be dimmed with a standard electronic dimmer or a 0-0V
More informationTerminal blocks Index
Terminal Index - Terminal SNK terminal....1.72 General information Features and benefits...1 -.3...4 Marking solutions...5 Panorama...6 -.7 Ordering details ZS4 Screw terminal...8 ZS6 Screw terminal...9
More informationF l a t S c r e e n A R M S I n s t a l l a t i o n
ITEM NUMBERS (1) #TOACAORG16 (2) #TOACAORG20 (3) #TOACATRP24 (4) #TOACATRP30 (5) #TOACATRPDS (6) #TOACATRPSS TOOLS REQUIRED (1) 3/8 Wrench (not provided) (2) Phillips head screwdriver (not provided) (1)
More informationMultifunctional three-phase monitoring relays CM-MPS CM-MPS.23
Data sheet Multifunctional three-phase monitoring relays CM-MPS CM-MPS.23 The three-phase monitoring relay CM-MPS.23 monitors the phase parameters phase sequence, phase failure, over- and undervoltage
More informationPower Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
More informationPLATE JOINER 4 INCH. ASSEMBLY and OPERATING INSTRUCTIONS. Distributed Exclusively by Harbor Freight Tools
PLATE JOINER 4 INCH 38437 ASSEMBLY and OPERATING INSTRUCTIONS Distributed Exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights
More informationDatenblatt. W-Series WDU 10
The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality
More informationFILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT
04 July, 2018 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Document Filetype: PDF 293 KB 0 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Alibaba.com offers 124 4 gauge wire connectors products. Unique Bargains
More informationIncandescent Lampholders: Edison Screw and Bayonet Cap
: Edison Screw and Bayonet Cap Table of Contents E14 22.223 22.230 E12 22.228 22.231 [08]..10 E17 E27 22.317 [08] 12 22.318 [08] 12, 13 2010-2012 This page is only valid in connection with the general
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More information1. Turn off or disconnect power to unit (machine). 2. Push IN the release bar on the quick change base plate. Locking latch will pivot downward.
Figure 1 Miniature Quick Change Applicators, of the end feed type, are designed to crimp end feed strip terminals to prestripped wires. Each applicator is set up to accept the strip form of certain specific
More informationConnecting the Channel A
20 Edge Lighting. All Rights Reserved. Installation Instructions for Cirrus Channel Suspension T, Tubular Lens w/2sq or 2RD Canopy IMPORTANT INFORMATION - This product is suitable for indoor locations.
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More information