2/2 Introduction. Unequipped Distribution Boards 2/5 8GK1 surface and flush-mounting distribution boards

Transcription

1 Siemens AG 010 ALPHA DIN Wall-Mounted Distribution Boards / Introduction Distribution Boards with Built-In Distribution Board Panels /4 8GK1 surface and flush-mounting with quickassembly kits Unequipped Distribution Boards /5 8GK1 surface and flush-mounting Quick-Assembly Kits for Unequipped Distribution Boards /6 8GK4 quick-assembly kits for modular installation devices Assembly Kits for Unequipped Distribution Boards /7 8GK4 longitudinal stays /7 Assembly kits for modular installation devices /8 8GK4 assembly kits for horizontal terminal blocks /8 8GK4 assembly kits with mounting plates /9 8GK4 assembly kits for unequipped panels /9 Mounting of fuse switch disconnectors Accessories /10 Unequipped and partially equipped /11 Quick-assembly kits and standard assembly kits Siemens ET A1 10/009

2 Siemens AG 010 Introduction ALPHA DIN wall-mounted distribution boards Partially equipped Page Surfacemounting distribution boards Flushmounting distribution boards Rated current Cabinet depth Safety class Degree of protection A mm 1 / IP31/IP43 Unequipped / IP31/IP43 System The modular design of our new Siemens distribution board system draws on our long years of experience in the distribution board sector. This system has been tailored to meet individual requirements for distribution board installation. The system comprises unequipped, partially equipped with cabinet-high quick-assembly kits, cabinet-high quick-assembly kits for modular installation devices for fast equipping and wiring, assembly kits for projectrelated and individual assembly, as well as an extensive range of accessories. Enclosures Material: Electrogalvanized and powder-coated sheet steel. Sheet thickness: Body 0.75 mm, door 1 mm Color: RAL 9016 (traffic white). Further RAL colors are available on request. Quick-assembly kits and standard assembly kits The assembly kits are made of sendzimir-galvanized sheet steel and are equipped with molded-plastic covers for a wide range of equipping options, e.g., for switching devices and modular installation devices. The largest switching devices mountable with the ALPHA DIN wall-mounted are the 3NP40 10 and 3NP40 70 fuse switch disconnectors of size NH 000 and NH 00 with a rated current of up to 160 A. Benefits Easy planning thanks to modular design Ample wiring space behind the standard mounting rail Comprehensive range of cabinet-high and frequently used quick-assembly kits and assembly kits for individual and project-related assembly Easy assembly thanks to keyhole-fastened components and modules with quick-acting locks Fast mounting times thanks to quick-assembly kits System concept according to DIN, EN and VDE regulations Solid sheet-steel enclosure Degree of protection: - Surface mounting: IP43 with door - Flush mounting: IP31 with door and integrated masking frame Safety class (total insulation) High-quality surface finish: made of electrogalvanized and powder-coated sheet steel, system components made of sendzimir-galvanized sheet steel, galvanized and transparently chromated small components and screws Doors can be hinged on the right or left Door opening angle of 170 Replaceable locking systems (accessories) Front cover with sealable 90 quick-acting locks Environmentally-friendly and recyclable plastics. Application ALPHA DIN wall-mounted are used for all applications for which a small distribution board does not provide sufficient equipping or wiring space, e.g. in residential, administrative, non-residential, commercial and industrial buildings. Its ultra flat design (depth 140 mm) makes it an extremely useful addition to the Siemens distribution board product range. The distribution board and its components are of modular design. With just a few standard components, it is possible to achieve a wide range of project-related mounting and equipping options. The ALPHA DIN wall-mounted distribution board range comprises wall-mounted with up to 7 modular installation devices with 1 MW per mounting width (50 mm) each. The standard mounting rail tier spacing is 15 mm or 150 mm. A total of 4 cabinet widths are available, each with an internal dimension of 50 mm. The can be supplied in safety class (total insulation). The standard degree of protection for surfacemounting is IP43 and IP31 for flush-mounting. The rated current is 160 A. The modular design of the board enables easy planning, configuration, calculation, ordering and mounting. Cabinet-high quick-assembly kits or assembly kits that only require a one-size screwdriver for assembly are available for all mountable switching devices and modular installation devices. / Siemens ET A1 10/009

3 Siemens AG 010 Introduction Technical specifications Overvoltage category III Rated impulse withstand voltage U imp in KV 6 Clearance and creepage distances DIN VDE 0110 Rated insulation voltage U i in V 690 Rated operational voltage U e in V AC/DC 690 Rated voltage U n (40 Hz to 60 Hz AC) in V 690 for built-in devices Rated current in A Up to 160 Protective measures Safety class (total insulation) Degree of protection acc. to EN 6059 Surface mounting: IP43 with door Flush mounting: IP31 with door and integrated masking frame Standard mounting rail tier spacing per standard mounting rail tier 15/150 in mm Modular width (MW) 18 mm, 1 MW + 1 mountable MW Pollution degree 3 Ambient temperature in C 35 (4-h average value) Relative air humidity in % 50 at 40 C Test specifications EN /3 (VDE 0660 Part 500/504) Enclosures Sheet steel Mounting dimensions DIN Surface Electrogalvanized and powder-coated Color Enclosure 1) RAL 9016 (traffic white) Covers RAL 7035 (light gray) Locking system Rotary handle this can be replaced by other locking systems on request Packing material Shock-proof, environmentally-friendly 1) Further RAL colors are available on request. Cabinet dimensions Surface-mounting (external dimensions) Depth 140 mm Flush-mounting distribution boards with integrated masking frame (external dimensions) Depth 140 mm Height Width Height Width mm mm mm mm Siemens ET A1 10/009 /3

4 Siemens AG 010 Distribution Boards with Built-In Distribution Board Panels 8GK1 surface and flush-mounting with quick-assembly kits Cabinet depth of 140 mm Safety class (total insulation) Tier spacing of 15 mm with N-/PE-bar per panel width RAL 9016 (traffic white) Surface-mounting distribution board: Degree of protection IP43 Flush-mounting distribution board with integrated masking frame: degree of protection IP31 Enclosure complete with door. Distribution boards with a width of 750/800 mm or more will be supplied with a double door. The integral rotary handle can also be replaced with a different type of locking system, if preferred. Two -component flanges per panel width at the top and bottom Note: Wall anchors are included in delivery with flush-mounting. Internal/external dimensions Panel width Tiers/ MW DT Surface-mounting Height Width Order No. Price DT Flush-mounting Order No. Price mm mm 450/500 50/300 3/36 A 8GK1 05-1KK C 8GK KK /550 6/7 A 8GK1 05-1KK A 8GK KK /800 9/108 C 8GK1 05-1KK C 8GK KK /650 50/300 4/48 A 8GK1 05-KK A 8GK1 051-KK /550 8/96 A 8GK1 05-KK A 8GK1 051-KK /800 1/144 A 8GK1 05-KK C 8GK1 051-KK / /19 C 8GK1 05-KK C 8GK1 051-KK /800 50/300 5/60 A 8GK1 05-3KK C 8GK KK /550 10/10 A 8GK1 05-3KK A 8GK KK /800 15/180 A 8GK1 05-3KK C 8GK KK /1050 0/40 C 8GK1 05-3KK C 8GK KK /950 50/300 6/7 A 8GK1 05-4KK A 8GK KK /550 1/144 A 8GK1 05-4KK A 8GK KK /800 18/16 A 8GK1 05-4KK A 8GK KK /1050 4/88 C 8GK1 05-4KK C 8GK KK / /300 7/84 A 8GK1 05-5KK C 8GK KK /550 14/168 A 8GK1 05-5KK A 8GK KK /800 1/5 A 8GK1 05-5KK A 8GK KK /1050 8/336 A 8GK1 05-5KK C 8GK KK For accessories, see page /10 ff. /4 Siemens ET A1 10/009

5 Siemens AG 010 Unequipped 8GK1 surface and flush-mounting Cabinet depth of 140 mm Safety class (total insulation) RAL 9016 (traffic white) Surface-mounting distribution board: Degree of protection IP43 Flush-mounting distribution board with integrated masking frame: degree of protection IP31 Enclosure complete with door. Distribution boards with a width of 750/800 mm or more will be supplied with a double door. The integral rotary handle can also be replaced with a different type of locking system, if preferred. Two -component flanges per panel width at the top and bottom Note: Wall anchors are included in delivery with flush-mounting. Internal/external dimensions Panel width DT Surface-mounting Height Width Order No. Price DT Flush-mounting Order No. Price mm mm 450/500 50/300 A 8GK1 03-1KK C 8GK KK /550 A 8GK1 03-1KK C 8GK KK /800 C 8GK1 03-1KK C 8GK KK /650 50/300 A 8GK1 03-KK C 8GK1 031-KK /550 A 8GK1 03-KK C 8GK1 031-KK /800 C 8GK1 03-KK C 8GK1 031-KK /1050 C 8GK1 03-KK C 8GK1 031-KK /800 50/300 A 8GK1 03-3KK A 8GK KK /550 A 8GK1 03-3KK A 8GK KK /800 A 8GK1 03-3KK C 8GK KK /1050 C 8GK1 03-3KK C 8GK KK /950 50/300 A 8GK1 03-4KK C 8GK KK /550 A 8GK1 03-4KK A 8GK KK /800 A 8GK1 03-4KK C 8GK KK /1050 C 8GK1 03-4KK C 8GK KK / /300 A 8GK1 03-5KK C 8GK KK /550 A 8GK1 03-5KK A 8GK KK /800 A 8GK1 03-5KK C 8GK KK /1050 A 8GK1 03-5KK C 8GK KK For quick-assembly kits and standard assembly kits, see page /6 to /1. For accessories, see page /10 ff. Siemens ET A1 10/009 /5

6 Siemens AG 010 Quick-Assembly Kits for Unequipped Distribution Boards 8GK4 quick-assembly kits for modular installation devices Quick-assembly kits are pre-assembled, cabinet-high system components for the most common applications. These kits come complete with longitudinal stays and are simply snapped into the unequipped of the respective mounting height thanks to the time-saving quick-locking technology. External dimensions Tiers/ MW DT Quick-assembly kits for modular installation devices Tier spacing of 15 mm, with N-/PE-bar Height Width Order No. Price DT Tier spacing of 150 mm, without N/PE bar Order No. Price mm mm /36 B 8GK KK A 8GK KK GK KK /48 A 8GK KK B 8GK KK GK KK /60 A 8GK KK B 8GK KK GK KK /7 A 8GK KK A 8GK KK GK KK /84 A 8GK KK A 8GK KK GK KK11 The quick-assembly kits with a width of 50 mm are equipped with 7.5 mm standard mounting rails. For accessories, see page /11. /6 Siemens ET A1 10/009

7 Siemens AG 010 Assembly Kits for Unequipped Distribution Boards 8GK4 longitudinal stays Version DT Order No. Price 8GK KK00 Longitudinal stays To mount the assembly kits in unequipped, two longitudinal stays are required for each assembly kit width 1 set = stays Height in mm 450 A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set A 8GK KK00 1 set 1 set 039 Assembly kits for modular installation devices Assembly kits for individual and project-related assembly, comprising: equipment racks, front cover including supports, screws and mounting accessories The front cover is sealable as standard and the quick-acting locking technique facilitates fast and reliable mounting on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). External dimensions Tiers/ MW DT Assembly kits for modular installation devices Tier spacing of 15 mm, without N/PE bar Height Width Order No. Price DT Tier spacing of 150 mm, without N/PE bar Order No. Price mm mm /1 -- A 8GK KK /4 -- B 8GK KK GK KK /4 B 8GK4 301-KK A 8GK4 351-KK /48 B 8GK4 301-KK A 8GK4 351-KK GK KK /36 A 8GK KK A 8GK KK /7 A 8GK KK A 8GK KK GK KK /48 B 8GK KK A 8GK KK /96 B 8GK KK A 8GK KK GK KK1 The assembly kits with a width of 50 mm and 500 mm are equipped with 7.5 mm standard mounting rails. For accessories, see page /11. Siemens ET A1 10/009 /7

8 Siemens AG 010 Assembly Kits for Unequipped Distribution Boards 8GK4 assembly kits for horizontal terminal blocks Assembly kits for individual and project-related assembly, comprising: equipment racks, front cover including supports, screws and mounting accessories The front cover is sealable as standard and the quick-acting locking technique facilitates fast and reliable mounting on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). 8GK KK11 For accessories, see page /11 ff. Version DT Order No. Price Assembly kits for horizontal terminal blocks Terminal blocks are installed on graded insulating mountings With front cover Closed Height in mm (external dimensions) Width in mm (external dimensions) A 8GK KK A 8GK KK A 8GK4 401-KK A 8GK4 401-KK Note For assembly kits with a width of 500 mm, we recommend installing a vertical profile bar. 8GK4 assembly kits with mounting plates Assembly kits for individual and project-related assembly, comprising: mounting plate, front cover for unequipped panels including supports, screws and mounting accessories The front cover is sealable as standard and the quick-acting locking technique facilitates fast and reliable mounting on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). 8GK4 451-KK11 For accessories, see page /11 ff. Version DT Order No. Price Assembly kits with mounting plates With front cover Closed Assembly kit external dimensions in mm Mounting plate dimensions in mm Height Width Height Width A 8GK4 451-KK A 8GK KK A 8GK KK /8 Siemens ET A1 10/009

9 Siemens AG 010 Assembly Kits for Unequipped Distribution Boards 8GK4 assembly kits for unequipped panels Assembly kits for individual and project-related assembly, comprising: front cover for unequipped panels including supports, screws and mounting accessories The front cover is sealable as standard and the quick-acting locking technique facilitates fast and reliable mounting on the supports Note: To mount the assembly kits in unequipped distribution boards, longitudinal stays are required per assembly kit. These must be ordered separately (see page /7). Version DT Order No. Price 8GK KK11 For accessories, see page /11 ff. Assembly kits for unequipped panels Height in mm (external dimensions) Width in mm (external dimensions) A 8GK KK A 8GK KK A 8GK4 501-KK A 8GK4 501-KK A 8GK KK A 8GK KK A 8GK KK B 8GK KK Mounting of fuse switch disconnectors Installation of the size NH000 and NH00 3NP1 fuse switch disconnectors in the ALPHA 160 wall-mounted distribution board is performed with the assembly kits for modular installation devices. Here the fuse switch disconnector is mounted between the standard mounting rails and the front cover on the modular installation devices cut out appropriately (see graphic). Covering strip I_18163 Siemens ET A1 10/009 /9

10 Siemens AG 010 Accessories Unequipped and partially equipped 8GK9 91-0KK10 Version DT Order No. Price Wall-mounting rails For all wall-mounted The distribution board allows fast and accurate mounting by one person Length in mm 50 B 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK A 8GK9 91-0KK Cabinet mounting lugs, flat Versions For mounting and fixing a cabinet directly against the wall without A 8GK KK36 1 set 5 sets 039 spacing - 1 set = 4 lugs incl. screws For linking two cabinets and mounting and fixing directly against the wall without spacing - 8GK KK36 also required for the ends of a series of cabinets - 1 set = lugs incl. screws A 8GK KK37 1 set 1 set 039 Hollow-wall sets For fixing flush-mounting in hollow-walls A 8GK KK8 1 set 1 set 039 8GK KK04 Locking systems Versions Standard locking devices A 8GK KK Made of plastic -Black - With rotary handle for wall-mounted distribution board, degree of protection IP43 - Cannot be retrofitted to other locking devices Rotary handle locking devices for profile cylinders A 8GK KK For wall-mounted with degree of protection IP43/IP55, with mounting option for a profile semicylinder (length 40 mm) - Suitable for E01 or Senat tumbler -Black Lockable rotary handles A 8GK KK Incl. E01 lock and two keys Profile semicylinders Versions With E01 lock and two keys A 8GK KK GK KK07 With Senat tumbler and two keys C 8GK KK GK KK08 With 3-mm pin as double-bit lock A 8GK KK GK KK10 8GK KK0 8GD component flanges For fast and correct wiring With 44 possible knockouts Comprising elastic components Siemens nameplates Made of aluminum Self-adhesive Petrol Paint sticks RAL 9016 (traffic white) 1 g Paint spray cans RAL 9016 (traffic white) 400 ml A 8GK KK A 8GD A 8GK KK C 8GK KK /10 Siemens ET A1 10/009

11 Siemens AG 010 Accessories Quick-assembly kits and standard assembly kits Version DT Order No. Price Partitions For the visual and spatial separation of different potentials Material: plastic Versions Vertical - Height 450 mm A 8GK KK Height 600 mm B 8GK KK Height 750 mm B 8GK KK Height 900 mm A 8GK KK Height 1050 mm A 8GK KK GK KK01 8GK9 00-0KK10 Horizontal - Width 50 mm A 8GK9 00-0KK N/PE bars A 8GK KK For mounting on longitudinal stays, with 9 clamping points, 16 mm 50 mm long 8GK KK10 8GK KK11 N/PE bars as plug-in terminals Versions Each with 6 screw terminals from mm and 1 plug-in terminals from mm for mounting on longitudinal stays at a 30 inclination With 6 screw terminals from mm and 1 plug-in terminals from mm for PE bar and one N bar each with screw terminals from mm and 10 plug-in terminals from mm for mounting on longitudinal stays at a 30 inclination A 8GK KK A 8GK KK N terminals N } 8GS For snapping onto standard mounting rail For distributing the neutral conductor to two residual current operated circuit-breakers screw terminal, conductor cross-section max. 16 mm 14 plug-in terminal, conductor cross-section max. 4 mm 8GS PE terminals N } 8GS For snapping onto standard mounting rail screw terminal, conductor cross-section max. 16 mm 14 plug-in terminal, conductor cross-section max. 4 mm 8GS N/PE terminals N } 8GS For snapping onto standard mounting rail For distributing the neutral conductor to two residual current operated circuit-breakers 1 screw terminal, conductor cross-section max. 16 mm 1) 7 plug-in terminal, conductor cross-section max. 4 mm 1) Footnote Per PE or N potential. 8GS Siemens ET A1 10/009 /11

12 Siemens AG 010 Accessories Quick-assembly kits and standard assembly kits Version DT Order No. Price N/N terminals N } 8GS For snapping onto standard mounting rail For distributing the neutral conductor to two residual current operated circuit-breakers 1 screw terminal, conductor cross-section max. 16 mm 1) 7 plug-in terminal, conductor cross-section max. 4 mm 1) Footnote Per PE or N potential. 8GS Supports for front cover Short version Material: plastic 1 set = 4 supports A 8GK KK0 1 set 5 sets 039 8GK KK0 8GK KK00 8GK KK7 8GK KK35 Blanking strips Color RAL 7035 (light gray) Versions For 1 MW (1 MW = 18 mm) A 8GK KK Length 1 m, without pressure-relief joint, to cut to length A 8GK KK ALPHA assembly tools For supports Short and long version With ergonomic handle for supports Standard mounting rails, lowered Width A 8GK KK mm A 8GK KK mm N C 8GK KK40 1 set 1 set mm N C 8GK KK41 1 set 1 set 039 /1 Siemens ET A1 10/009 7