ST SERIES - MINIATURE ROCKER & LEVER SWITCHES
|
|
|
- Matilda Kelley
- 5 years ago
- Views:
Transcription
1 ST SERIES - MIIATURE & SWITCHES SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted and unlighted. SPECIFICATIOS Contact ratings (resistive loads): (Q) power models - coin silver: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC. (B) dry circuit models - gold over nickel over brass: 0.4 VA max. at 20 V max. UL models - coin silver: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). UL file no. E CSA models - coin silver: same ratings as UL models. CSA file no. LR Initial contact resistance: 3 milliohms max. at 3 VDC, 0.1 Amp. Insulation resistance: Greater than 200,000 megohms between terminals & case ground. Dielectric strength: Greater than 2000 VAC for 1 minute between terminals & case ground. Electrical life (resistive loads): 100,000 cycles min.for ST1-1 & ST2-1. Other models, 40,000 cycles min. Operating temperature range: -30 C to +85 C MATERIALS Contacts: circuit models. Actuator: Bushing: Strap: Case: Terminal seal: Support bracket: Spring mounting bracket: Bezel: Hardware: LED: Coin silver for power,ul & CSA models. Gold over nickel over brass for dry J1 & J2 - Glass filled polyester. J3 & J4 - ylon or acetal ickel plated brass Stainless steel DAP, color blue Epoxy (optional) Brass or steel, tin plated Stainless steel ylon. Available in black, red & white. Consult factory for other colors. See 'Miscellaneous' section. Intensity: 2.0 mcd at 10 ma. Forward voltage: 2.0V (3.0V max.). Max. continuous forward current: 15 ma for red, 30 ma for green & 20 ma for yellow. Red is standard. Yellow & green are optional. Specifications are subject to change without notice - consult factory. AGECY RECOGITIO UL, & CSA. Marking: Switches ordered by UL model number are supplied with recognition marking. Switches ordered by UL model no. and with '/CSA' added at end of model no. are supplied with both recognized marks. ABOUT THIS SERIES The material in this series is organized in the following sequence: a. Completely specified switch models b. Miscellaneous c. 'build your own switch' order format d. Option drawings & information e. Mounting information and panel cut-outs 20 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
2 ST SERIES - MIIATURE & SWITCHES Solder lug terminals - panel mounting SIGLE WITH J1 WITH J2 POWER CKT. MODEL O. UL MODEL O. ST1-1L4S4ZQJ12 UL11L4S4ZQJ12 O OE O ST1-2L4S4ZQJ12 UL12L4S4ZQJ12 O OFF O ST1-4L4S4ZQJ12 UL14L4S4ZQJ12 O OFF MOM ST2-1L4S4ZQJ12 UL21L4S4ZQJ12 O OE O ST2-2L4S4ZQJ12 UL22L4S4ZQJ12 O OFF O ST2-4L4S4ZQJ12 UL24L4S4ZQJ12 O OFF MOM ST2-6L4S4ZQJ12 UL26L4S4ZQJ12 O O O ST2-7L4S4ZQJ12 UL27L4S4ZQJ12 O O MOM ST2-8L4S4ZQJ12 UL28L4S4ZQJ12 MOM O MOM Above models have black actuator. SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE SIGLE Straight p.c. terminals with bracket - p.c. mounting SIGLE WITH J1 WITH J2 MODEL O. UL MODEL O. ST1-1L4S4V30BJ12 UL11L4S4V30QJ12 O OE O ST1-2L4S4V30BJ12 UL12L4S4V30QJ12 O OFF O ST1-4L4S4V30BJ12 UL14L4S4V30QJ12 O OFF MOM ST2-1L4S4V30BJ12 UL21L4S4V30QJ12 O OE O ST2-2L4S4V30BJ12 UL22L4S4V30QJ12 O OFF O ST2-4L4S4V30BJ12 UL24L4S4V30QJ12 O OFF MOM ST2-6L4S4V30BJ12 UL26L4S4V30QJ12 O O O ST2-7L4S4V30BJ12 UL27L4S4V30QJ12 O O MOM ST2-8L4S4V30BJ12 UL28L4S4V30QJ12 MOM O MOM Above models have black actuator. SIGLE APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com 21
3 ST SERIES - MIIATURE & SWITCHES SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE Horizontal right angle p.c. terminals - p.c. mounting SIGLE WITH J1 WITH J2 MODEL O. UL MODEL O. ST1-1L4S4A-1BJ12 UL11L4S4A-1QJ12 O OE O ST1-2L4S4A-1BJ12 UL12L4S4A-1QJ12 O OFF O ST1-4L4S4A-1BJ12 UL14L4S4A-1QJ12 O OFF MOM ST2-1L4S4A-1BJ12 UL21L4S4A-1QJ12 O OE O ST2-2L4S4A-1BJ12 UL22L4S4A-1QJ12 O OFF O ST2-4L4S4A-1BJ12 UL24L4S4A-1QJ12 O OFF MOM ST2-6L4S4A-1BJ12 UL26L4S4A-1QJ12 O O O ST2-7L4S4A-1BJ12 UL27L4S4A-1QJ12 O O MOM ST2-8L4S4A-1BJ12 UL28L4S4A-1QJ12 MOM O MOM Above models have black actuator. SIGLE Vertical right angle p.c. terminals - p.c. mounting SIGLE WITH J1 WITH J2 MODEL O. UL MODEL O. ST1-1L4S4V-1BJ12 UL11L4S4V-1QJ12 O OE O ST1-2L4S4V-1BJ12 UL12L4S4V-1QJ12 O OFF O ST1-4L4S4V-1BJ12 UL14L4S4V-1QJ12 O OFF MOM ST2-1L4S4V-1BJ12 UL21L4S4V-1QJ12 O OE O ST2-2L4S4V-1BJ12 UL22L4S4V-1QJ12 O OFF O ST2-4L4S4V-1BJ12 UL24L4S4V-1QJ12 O OFF MOM ST2-6L4S4V-1BJ12 UL26L4S4V-1QJ12 O O O ST2-7L4S4V-1BJ12 UL27L4S4V-1QJ12 O O MOM ST2-8L4S4V-1BJ12 UL28L4S4V-1QJ12 MOM O MOM Above models have black actuator. SIGLE 22 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
4 ST SERIES - MIIATURE & SWITCHES Solder lug terminals - snap-in bezel with outboard LED SIGLE WITH J3 WITH J4 POWER CKT. MODEL O. UL MODEL O. ST1-1L5S5ZQJ3J6122 UL11L5S5ZQJ3J6122 O OE O ST1-2L5S5ZQJ3J6122 UL12L5S5ZQJ3J6122 O OFF O ST1-4L5S5ZQJ3J6122 UL14L5S5ZQJ3J6122 O OFF MOM ST2-1L5S5ZQJ3J6122 UL21L5S5ZQJ3J6122 O OE O ST2-2L5S5ZQJ3J6122 UL22L5S5ZQJ3J6122 O OFF O ST2-4L5S5ZQJ3J6122 UL24L5S5ZQJ3J6122 O OFF MOM ST2-6L5S5ZQJ3J6122 UL26L5S5ZQJ3J6122 O O O ST2-7L5S5ZQJ3J6122 UL27L5S5ZQJ3J6122 O O MOM ST2-8L5S5ZQJ3J6122 UL28L5S5ZQJ3J6122 MOM O MOM SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE.512/.517 Panel thickness range.047" to.125" Solder lug terminals - snap-in bezel SIGLE WITH J3 WITH J4 POWER CKT. MODEL O. UL MODEL O. ST1-1L5S5ZQJ4J9022 UL11L5S5ZQJ4J9022 O OE O ST1-2L5S5ZQJ4J9022 UL12L5S5ZQJ4J9022 O OFF O ST1-4L5S5ZQJ4J9022 UL14L5S5ZQJ4J9022 O OFF MOM ST2-1L5S5ZQJ4J9022 UL21L5S5ZQJ4J9022 O OE O ST2-2L5S5ZQJ4J9022 UL22L5S5ZQJ4J9022 O OFF O ST2-4L5S5ZQJ4J9022 UL24L5S5ZQJ4J9022 O OFF MOM ST2-6L5S5ZQJ4J9022 UL26L5S5ZQJ4J9022 O O O ST2-7L5S5ZQJ4J9022 UL27L5S5ZQJ4J9022 O O MOM ST2-8L5S5ZQJ4J9022 UL28L5S5ZQJ4J9022 MOM O MOM.512/.517 Panel thickness range.047" to.125" APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com 23
5 ST SERIES - MIIATURE & SWITCHES SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE Straight p.c. terminals - p.c. mounting bezel SIGLE WITH J3 MODEL O. UL MODEL O. ST1-1L5S5CBJ3J9322 UL11L5S5CQJ3J9322 O OE O ST1-2L5S5CBJ3J9322 UL12L5S5CQJ3J9322 O OFF O ST1-4L5S5CBJ3J9322 UL14L5S5CQJ3J9322 O OFF MOM ST2-1L5S5CBJ3J9322 UL21L5S5CQJ3J9322 O OE O ST2-2L5S5CBJ3J9322 UL22L5S5CQJ3J9322 O OFF O ST2-4L5S5CBJ3J9322 UL24L5S5CQJ3J9322 O OFF MOM ST2-6L5S5CBJ3J9322 UL26L5S5CQJ3J9322 O O O ST2-7L5S5CBJ3J9322 UL27L5S5CQJ3J9322 O O MOM ST2-8L5S5CBJ3J9322 UL28L5S5CQJ3J9322 MOM O MOM SIGLE Straight p.c. terminals w/bracket - p.c. mounting bezel SIGLE WITH J4 MODEL O. UL MODEL O. ST1-1L5S5V30BJ3J9322 UL11L5S5V30QJ3J9322 O OE O ST1-2L5S5V30BJ3J9322 UL12L5S5V30QJ3J9322 O OFF O ST1-4L5S5V30BJ3J9322 UL14L5S5V30QJ3J9322 O OFF MOM ST2-1L5S5V30BJ3J9322 UL21L5S5V30QJ3J9322 O OE O ST2-2L5S5V30BJ3J9322 UL22L5S5V30QJ3J9322 O OFF O ST2-4L5S5V30BJ3J9322 UL24L5S5V30QJ3J9322 O OFF MOM ST2-6L5S5V30BJ3J9322 UL26L5S5V30QJ3J9322 O O O ST2-7L5S5V30BJ3J9322 UL27L5S5V30QJ3J9322 O O MOM ST2-8L5S5V30BJ3J9322 UL28L5S5V30QJ3J9322 MOM O MOM SIGLE SIGLE 24 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
6 ST SERIES - MIIATURE & SWITCHES Horizontal right angle p.c. terminals - p.c. mtg. bezel SIGLE WITH J3 Poles Option Dim. A Dim. B SP A max. SP A max. DP A max. DP A max. MODEL O. UL MODEL O. ST1-1L5S5A-1BJ3J9322 UL11L5S5A-1QJ3J9322 O OE O ST1-2L5S5A-1BJ3J9322 UL12L5S5A-1QJ3J9322 O OFF O ST1-4L5S5A-1BJ3J9322 UL14L5S5A-1QJ3J9322 O OFF MOM ST2-1L5S5A-1BJ3J9322 UL21L5S5A-1QJ3J9322 O OE O ST2-2L5S5A-1BJ3J9322 UL22L5S5A-1QJ3J9322 O OFF O ST2-4L5S5A-1BJ3J9322 UL24L5S5A-1QJ3J9322 O OFF MOM ST2-6L5S5A-1BJ3J9322 UL26L5S5A-1QJ3J9322 O O O ST2-7L5S5A-1BJ3J9322 UL27L5S5A-1QJ3J9322 O O MOM ST2-8L5S5A-1BJ3J9322 UL28L5S5A-1QJ3J9322 MOM O MOM SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE Vertical right angle p.c. terminals - p.c. mtg. bezel SIGLE WITH J4 SIGLE MODEL O. UL MODEL O. ST1-1L5S5V-1BJ3J9322 UL11L5S5V-1QJ3J9322 O OE O ST1-2L5S5V-1BJ3J9322 UL12L5S5V-1QJ3J9322 O OFF O ST1-3L5S5V-1BJ3J9322 UL13L5S5V-1QJ3J9322 MOM OFF MOM ST1-4L5S5V-1BJ3J9322 UL14L5S5V-1QJ3J9322 O OFF MOM ST1-5L5S5V-1BJ3J9322 UL15L5S5V-1QJ3J9322 O OE MOM ST2-1L5S5V-1BJ3J9322 UL21L5S5V-1QJ3J9322 O OE O ST2-2L5S5V-1BJ3J9322 UL22L5S5V-1QJ3J9322 O OFF O ST2-3L5S5V-1BJ3J9322 UL23L5S5V-1QJ3J9322 MOM OFF MOM ST2-4L5S5V-1BJ3J9322 UL24L5S5V-1QJ3J9322 O OFF MOM ST2-5L5S5V-1BJ3J9322 UL25L5S5V-1QJ3J9322 O OE MOM ST2-6L5S5V-1BJ3J9322 UL26L5S5V-1QJ3J9322 O O O ST2-7L5S5V-1BJ3J9322 UL27L5S5V-1QJ3J9322 O O MOM ST2-8L5S5V-1BJ3J9322 UL28L5S5V-1QJ3J9322 MOM O MOM SIGLE APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com 25
7 ST SERIES - MIIATURE & SWITCHES SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE Snap-in bezel for round hole mounting Self-keying against rotation ST1-1L5S5ZQJ4J9682 POWER CKT. MODEL O. UL MODEL O. ST1-1L5S5ZQJ4J9622 UL11L5S5ZQJ4J9622 O OE O ST1-2L5S5ZQJ4J9622 UL12L5S5ZQJ4J9622 O OFF O ST1-4L5S5ZQJ4J9622 UL14L5S5ZQJ4J9622 O OFF MOM ST2-1L5S5ZQJ4J9622 UL21L5S5ZQJ4J9622 O OE O ST2-2L5S5ZQJ4J9622 UL22L5S5ZQJ4J9622 O OFF O ST2-4L5S5ZQJ4J9622 UL24L5S5ZQJ4J9622 O OFF MOM ST2-6L5S5ZQJ4J9622 UL26L5S5ZQJ4J9622 O O O ST2-7L5S5ZQJ4J9622 UL27L5S5ZQJ4J9622 O O MOM ST2-8L5S5ZQJ4J9622 UL28L5S5ZQJ4J9622 MOM O MOM Panel thickness range.047" to.125". MISCELLAEOUS ST2-6, -7 & -8 SWITCHES May be wired as a single pole 3 position switch; add external jumper between terminals 1 & 5, then: Common terminal is 2 Output 1 - terminal 4 Output 2 - terminal 6 Output 3 - terminal 3 SWITCH BODY SIDE VIEW SIDE VIEW FROT VIEW SIGLE SIGLE AD SIZES WITH TERMIAL LOCATIO DIMESIOS TYPICAL SWITCH CROSS SECTIOS ote: Contacts make opposite actuator direction. O OE O O OFF O MOM OFF MOM O OFF MOM O OE MOM 26 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
8 ST SERIES - MIIATURE & SWITCHES Additional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. 'BUILD YOUR OW SWITCH' ORDER FORMAT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. Allowable options are shown below each respective box with brief description - see option dwgs. & info. following. ote: 'OE' indicates box may be left empty. Model Structure: Series Electrical Sub-actuators Sub-Bushings Terminations Contact functions materials Single pole: S T 1 - U L 1 Double pole: S T 2 - D.P. UL model: U L E FF FF M0M Following for DP only M0M 8 M0M 0 M0M Although most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question. L 4 Specify without bezel L 5 Specify with bezel S 4 Specify without bezel S 5 Specify with bezel Example of completely specified model number: ST2-3L5S5ZQEJ4J9622 Z Solder lug B Gold C Printed circuit Q Coin W Wirewrap silver W 1 Lg. wirewrap G Gold over W 3 Sht. wirewrap coin X Extra lg. wirewrap silver Horiz. right angle p.c.: A Economy gold A - 1 T Economy Vertical right angle p.c.: silver V V - 1 V - 2 Straight p.c. terms. w/brkt.: V 3 0 SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE Options: Sealing Actuator Bezel Bezel color Actuator color Recognition (OE) E Epoxy J 1 Rocker J 2 Lever J 3 Small rocker J 4 Small lever (OE) J 6 1 Snap-in w/led J 9 0 Snap-in no LED J 9 3 P.C. style Self-keying round hole mt.: J 9 6 Snap-in no LED ote: specify J3 or J4 actuators only with bezels. (OE) 2 Black 6 Red 8 White 2 Black 6 Red 8 White ote: J3 & J4 actuators available in black only. (OE) / C S A CSA lising Colors available: J1 & J2: Black, red or white. J3 & J4: Black. ACTUATOR OPTIOS J1 J2 J3 J4 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com 27
9 ST SERIES - MIIATURE & SWITCHES TERMIATIO OPTIOS A A-1 SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE SIGLE HORIZOTAL P.C. MOUTIG SIGLE HORIZOTAL P.C. MOUTIG A A-1 HORIZOTAL P.C. MOUTIG HORIZOTAL P.C. MOUTIG V, V-1 & V-2 FROT VIEW SIGLE FROT VIEW SIDE VIEW - SIGLE & Option Dim. A Dim. B V V V VERTICAL P.C. MOUTIG V30 & V40 PAEL LAYOUT V30, V31, V40 & V41 Option Dim. A Dim. B V V APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
10 ST SERIES - MIIATURE & SWITCHES TERMIATIO OPTIOS (COT'D.) Z C W W1 W3 X SOLDER LUG PRITED CIRCUIT WIREWRAP LOG WIREWRAP SHORT WIREWRAP EXTRA LG. WIREWRAP B Q COTACT MATERIAL OPTIOS Dry circuit - gold over nickel over brass. RATIG: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 100,000 cycles min. (ST1-1 & ST2-1 only - other models 40,000 cycles min.) Power circuit - coin silver. RATIG: 6 Amps at 125 VAC, 3 Amps at 250 VAC or 7 Amps at 30 VDC (resistive loads). ELECTRIC LIFE: 100,000 cycles min. (ST1-1 & ST2-1 only - other models 40,000 cycles min.) SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE G Dry circuit or power circuit - gold over nickel over coin silver. RATIGS & ELECTRIC LIFE: Same as B & Q above - i.e. - can be used in either dry circuit or power circuit, however once used in power circuit, switch cannot be re-used in dry circuit. This option satisfies those customers who have both dry circuit and power circuit requirements, but prefer to inventory only one switch for both. T Dry circuit - gold over nickel over brass. ote- less gold than B option. RATIG: 0.4 Volt-Amps (VA) max. at 20 V max. ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. Power circuit - Silver plate over brass. RATIG: 3 Amps at 125 VAC or 1.5 Amps at 250 VAC (resistive loads). ELECTRIC LIFE: 10,000 cycles min. at 13 cycles per minute. UL & CSA OPTIOS Solder dipped terminals and custom contact plating available - contact factory. UL CSA For power circuits - coin silver RATIG: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor). Underwriter Laboratories file no. E To specify, order UL model no. ote - applicable only to terminations with coin silver contacts (Q or G options). For power circuits - coin silver RATIG: 6 Amps at 125 VAC or 3 Amps at 250 VAC (75% power factor).canadian Standards Association file no. LR To specify, order UL model number, then add '/CSA' to complete switch number. ote - applicable only to terminations with coin silver contacts (Q or G options) as CSA recognizes switches for power applications only. SEALIG & MISCELLAEOUS OPTIOS E /R Epoxy terminal sealing: Available with all terminal configurations. The space between terminal & case hole is sealed with epoxy all around terminal. To specify reverse switch action on non-symmetrical models with bushing keyway, add '/R' to switch model no. Provides maximum protection from entry of flux or contaminants into the switch case. APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com 29
11 ST SERIES - MIIATURE & SWITCHES MOUTIG IFORMATIO & PAEL CUT-OUTS SPECIFICATIOS SUBJECT TO CHAGE WITHOUT OTICE J1 OR J2 Panel Hardware Stand-off tk'ness. number length 1/16" A /32" A /8" A J3 Panel Hardware Stand-off tk'ness. number length 1/16" A /32" A /8" A Mounting hardware consists of 2 each: Hex ut, stainless steel Screw, stainless steel Lockwasher, stainless steel Stand-off, aluminum J4 Panel Hardware Stand-off tk'ness. number length 1/16" A /32" A /8" A /8" panel hardware supplied if not specified separately by hardware number shown in tables. TYPICAL ASSEMBLY 30 APEM, 63 ECK ROAD, HAVERHILL, MA USA TOLL FREE: (877) FAX: (978) info@apem.com
Series 300. Miniature Rocker & Paddle Switches
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and
Pushbutton Switches. Sub-Miniature. Specifications: Switch Function. Page <1> 08/10/11 V1.1. : Dependent upon content material
Specifications: Contact rating : Dependent upon content material Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 20 mω initial at 2-4 V dc 100 ma for both silver and gold plated
TOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
General Specifications
Series M Miniature Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity
ROCKER SWITCHES B 1 SERIES 3A SPECIFICATIONS AGENCY APPROVALS
Miniature Rocker & Paddle switches HOW TO ORDER AGENCY APPROVALS C File N E195524 File N E195524 CHARACTERISTICS The most comprehensive range of terminations, brackets, toggle sizes and bushings. Dially
SMT TR series. Surface mount tiny washable rocker switches. Distinctive features and specifications.
SMT TR series Surface mount tiny washable rocker switches istinctive features and specifications Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials
1M Series Miniature Single Pole Toggle Switches
M Series Miniature Single Pole Toggle Switches 0.0. / - 0NS POS POS POS.0 0..0.. 0. 0... 0.0 CONNETED TEMINALS Model Model Pos. Pos. Pos. Pos. Pos. Pos. SP MS On None On MS On None Mom - OPEN - MOM=Momentary
1SS/1S1/1SM SUB-MINIATURE ROCKERS
SS/S/SM S-Series SUB-MINIATURE ROCKERS The S family of sub-miniature rocker switches is composed of three switch series; the S-Series sub-miniature rocker switch, the SS-Series sealed sub-miniature rocker
Quick Reference Guide Gemini Series Switches
Quick Reference Guide The TE Connectivity extensive Gemini A and Gemini AE Series offer one and two poles with multi circuit configurations, including: momentary function, locking toggle to avoid unwanted
Rocker and Paddle Switches
R2 Specifications: Contact rating : 5 A with resistant load at 120 V ac or 28 V dc 2 A with resistant load at 250 V ac Mechanical life : 50,000 make-and-break cycles Maximum contact resistance : 10 mω
TL series Tiny washable toggle switches
Distinctive features and specifications Sealed Single piece case O-ring seal between actuator and bushing Epoxy sealed terminals Wide variety of contact materials Same PCB layout as TP, TR and TG tiny
Ultraminiature Rocker&Lever Switches V ac or dc
Specifications: Contact Rating Mechanical Life Contact Resistance Minimum Insulation Resistance Dielectric Strength Operating Temperature Materials: Case and Bushing Switch Support Contacts/Terminals :
SPECIFICATIONS MATERIALS. Terminations M1 M2 M3 M51 M52 M53 M54 M6 M6N M7 VS2 V2N VS3 VS4 VS5
M Series Minature SPECIFICTIS CTCT RTING: Dependent upon contact material See page. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
AHU. Specifications. Materials. Ordering Information E UL Approved Illuminated Pushbutton. page 1
Specifications RoHS Compliant E222871 AHU Electrical Ratings Sealing Degree Electrical Life Mechanical Life Contact Resistance 3A @ 125VAC, 65 C, 50K cycles 3A @ 250VAC, 65 C, 50K cycles IP65 50,000 cycles
RoHS. Specifications. Part Number Configurator
RVW Series Rocker Switch Applications / Markets Floor Care Appliances Medical Equipment Electrical Houseware Specifications Commercial Appliances Home Appliances Features & Benefits Industrial Controls
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches
Quick Reference Guide Tiny Pushbutton and Toggle Series Switches TE Connectivity offers the Tiny line of switches in a range of ratings from 0.4VA up to 3A @125 VAC. The extensive product line includes
Gemini A Series. Features. Toggle Switches. Toggle Switches
Gemini A Series Features Gold, gold over silver or silver contacts Epoxy sealed terminals Stainless steel frame with brass tin plated solder support Hardware included Boot seals available Typical performance
Sealed Toggle Switches. Contact Material Q silver plated R gold plated G gold over silver K tin plated
E E TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q terminal) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
IP series Pushbutton switches for harsh environments - bushing Ø 12 mm - momentary
Distinctive features and specifications Illuminated or non-illuminated UG1212-A-R1 Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL
SERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
General Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
7M Series Snap-Acting Pushbutton Switches
Series Snap-cting SPECIFICTIS CTCT RTING: Dependent upon contact material see page 08. MECHNICL LIFE: 0,000 make-and-break cycles. CTCT RESISTNCE: 0m max. initial @ -VDC 00m for both silver and gold plated
KRPA, KRP, KA, KR series
Catalog 1084 Issued -0 KRPA, KRP, KA, KR series to 10 Amp General Purpose Relay File E944, E, E818 (KR Hermetic) File LR14 KRPA KRP KA Users should thoroughly review the technical data before selecting
TT, Tiny Toggle Switch
TT, Tiny Toggle Switch Features Compact design Vertical and horizontal right angle versions available Typical performance characteristics Contact configuration..........................., and pole Contact
APEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Q-Series Panel Mount LED Indicators PANEL MOUNT LED INDICATORS Apem Components, the renowned switch manufacturer, have complemented their extensive
PRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 1.27 mm (.050 inch) centerline (pitch) printed circuit board (PCB) modular jack connector series with selective gold and tin plating. 2.0 PRODUCT DESCRIPTION
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
Miniature Toggle Switches SPECIFICTIS CTCT RTING: @ VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min.
Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
HIGH DENSITY CONNECTORS 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8900 SERIES B-3
HIGH NSITY ONNTORS 0mil(.27mm) PITH 2 PI ONNTOR 8900 SRIS -3 LOW PROIL ONNTORS 89 ORR O Number of cotacts 0 : pi 030 : 30 pi 040 : 40 pi 00 : 0 pi 00 : 0 pi 080 : 80 pi 00 : 00 pi : pi Series ame Receptacle
Q6 series. Ø6 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING LED INDICATORS
IND-Q6-17-07 LED INDICATORS DISTINCTIVE FEATURES 3 mm colored diffused epoxy lens or 3 mm water clear super bright LEDs Prominent, recessed and flush bezel styles (2.0 x 0.5) solder lug terminals, pins
General Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
TECHNICAL SPECIFICATIONS PP1 Series
TECHNICAL SPECIFICATIONS Series Specifications Series Revision B Page: 1 / 10 1.0 SCOPE This specification describes the operating parameters, testing requirements, approvals, materials, and part numbering
Connector Dimensions. Part Number
CIRCULAR PLASTIC CONNECTORS CONTACT VERSIONS 3, 4, 7, 9, 12 & 25 position models 1 to 8 amps per contact Mixed signal and power or coax available recognized components File No. 102195 Each connector half
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
SBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
Miniature Toggle Switches
T0-T SPECIFICTIS CTCT RTING: @0 VC or VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VDC,00 m INSULTI RESISTNCE:,000 M min. DIELECTRIC STRENGTH:,00
PRODUCT DESCRIPTION PAG ES. E110 Series 1PDT, 10 AMP RELAY 2-6. E310 Series 3PDT, 10 AMP RELAY E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19
Index PRODUCT DESCRIPTION PAG ES E110 Series 1PDT, 10 AMP RELAY 2-6 E310 Series 3PDT, 10 AMP RELAY 7-12 E210 / E215 Series 2PDT, 10/15 AMP RELAY 13-19 E410 / E415 Series 4PDT, 10/15 AMP RELAY 20-24 E610
Multiple Density Solder Eyelet
Multiple Density Solder Eyelet FEATURES Solder lug terminals with.093" x.06" (.36mm x 1.57mm) wiring holes. Two-contact "Jones" connector is round, all others are rectangular. For use in cable-to-panel
SBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
MODEL: R9CWTU. Remote I/O R9 Series. EXTENSION UNIT 1: With connection
Remote I/O R9 Series MULTI POWER MOITORIG UIT (Clamp-on current sensor CLSE, CC-Link) Functions & Features Multi Power Monitoring Unit for CC-Link. By using clamp-on current sensors, there is no need of
SINGLE POLE SOCKETS - SOLDER MOUNT
SINGLE POLE SOCKETS - SOLDER MOUNT 450 - XXXX - XX - XX - 00 Body Brass Copper* Spring Beryllium Copper (Heat Treated) Dash Body Spring RoHS -03 Gold over Nickel Gold over Nickel -04 Electro-Tin Electro-Tin
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
Round Indicator Lights Mounting Hole Page
PRODUCT SERIES Round Indicator Lights Page 8, &. 9. &..7 - NEMA -R.7 8 & 9. 7. 8. 9 7. 8. - NEMA -R.9.9 Indicator Lights.7,.. 7. Rectangular Indicator Lights Panel Cutout. x.. x. 7 & 7. x.8 8. x. 9 & 7.
CALRAD 25 series - potentiometers
25 series - potentiometers audio /linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 2" dia. fits into 1 4" hole. Shaft 3 16" dia. Thread length 7 32", shaft length
VE 12 H M S E K HV VD (a) ( * ) (b) (c) (d) (e) (f) (g) (h) (i)
POWER RELAY 1 POLE 5 A (MEDIUM LOAD CONTROL) VE SERIES Lead Free FEATURES UL, CSA, VDE recognized 1 form A (SPST-NO) or 1 form C (SPDT) contact Low cost, miniature relay with big performance in small package
Powerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
SBE 160 / SBX 175 ORDERING INFORMATION SECTION 3. Touch Safe Interface Minimizes potential contact with live circuits per IEC & IEC 60529
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES
MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability gold-overlay
Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj
Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input
SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES
Your Contact for Industrial Relays SECTION 1 SOCKET COMPATIBLE AND FLANGE MOUNTED RELAYS 1 TO 30 AMPERES SOCKET COMPATIBLE & FLANGE MOUNT RELAYS RELAY SERIES CERTIFIED CLASS 1 DIVISION 2 FOR HAZARDOUS
PRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
PRODUCT SPECIFICATION
EC No: UC2018-0645 1.0 SCOE This roduct Specification covers the performance requirements and test methods of Micro-Fit 3.00 mm (.118 inch) centerline (pitch) wire to board and wire to wire connector systems
[ 21.3 ] 0.84 A [ 13.0 ] 0.51
![[ 21.3 ] 0.84 A [ 13.0 ] 0.51](/thumbs/92/108061905.jpg "[ 21.3 ] 0.84 A [ 13.0 ] 0.51")
Connectors - up to 175 Amps SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. SBE connectors feature an IEC 60950 touch safe housing
GENERAL PURPOSE RELAYS
CONTROL LOGIC GENERAL PURPOSE RELAYS GR c3controls offers a full line of General Purpose Relays ( plug-in relays), perfect for your control logic applications. Quick and economical to install, our relays
GHz BGA SOCKET - direct mount, solderless
45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression
JS SERIES 1 POLE 8 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 8 A (MEDIUM LOAD CONTROL) Lead Free FEATURES UL, CSA, VDE, SEV, SEMKO, FIMKO, ÖVE, BSI recognized UL class B (130 C) insulation 1 form A (SPST-NO) or 1 form C (SPDT) contact Low profile
General Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
onlinecomponents.com
MATERIAL SPEIFIATIONS: ontacts Gold over nickel or silver plate ase Material Thermoplastic V-0 Terminals/Fixed ontacts.tin lead plate Terminal Seal...Epoxy on single pole, optional on double pole Process
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash
CALRAD MINIATURE MULTI-CLICK DUAL CONTROLS 40 STEP P.C. MOUNT 11
25 Series - Potentiometers Audio & Linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1 /2" dia. fits into 1 /4 hole. Shaft 3 /16" dia. Thread length 7 /32", shaft
Position switches FM series
B Position switches FM series Selection diagram 0 08 0 A A 0 A 0 external rubber gasket external rubber gasket external rubber gasket external rubber gasket 69 stainless steel round rod square rod fiber
Precision and High Reliability Thermostats Issue 3. Datasheet. Table of Contents
Precision and High Reliability Thermostats DESCRIPTION Thermostats can provide either temperature control or overtemperature protection by breaking electrical contact when a specified temperature is reached.
Power Distribution Blocks with Short-Circuit Current Ratings
Power Distribution Blocks with Short-Circuit Current Ratings General Information: The requirements of the 005 National Electric Code (NEC) and UL508A now require many electrical panels to carry a Short
VSB SERIES 1 POLE 16 A (HEAVY POWER CONTROL) POWER RELAY. RoHS compliant FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 16 A (HEAVY POWER CONTROL) RoHS compliant FEATURES All or nothing relay UL, CSA, VDE, SEV, FIMKO, SEMKO, IMQ, ÖVE, BSI recognized Working class: C Type of service: continuous duty Heavy
Amphenol. Amphenol 97 Series Standard Cylindrical Connector. MIL-5015 Style Connectors widely used for:
Amphenol 97 Series Standard Cylindrical Connector 12-022-15 MIL-5015 Style Connectors widely used for: Factory Automation, Robotics Machine Tool, Instrumentation Welding Equipment Medical Equipment Amphenol
Distinctive Characteristics
Distinctive haracteristics Extremely low profile of. (.mm) from P to top of switch. Red, green, or yellow LED with spot or full face illumination. Rubber seal construction prevents contact contamination
TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N
![TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N](/thumbs/84/91187989.jpg "TEL:-3349 FAX:-332 FBR2 SERIES ORDERING INFORMATION [Example] FBR2 S A D2 U P 2 ( CSA) (a) (b) (c) (d) (e) (f ) (g) (h) (a) Series N")
TEL:-3349 FAX:-332E-MAIL: szss@3.com FUJITSU TAKAMISAWA COMPONENT CATALOG MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FBR2 SERIES FEATURES (FOR SIGNAL APPLICATIONS)
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets VDE 0mm Spacing, KV Dielectric File
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. EPower Connectors 4.20mm (.165") Pitch Mini-Fit Plus Terminal 46083 Crimp,
SBE 320 / SBX 350 Connectors - up to 350 Amps
Connectors - up to 350 Amps ORDERING INFORMATION SBX and SBE connectors can integrate up to 8 auxiliary power / signal contacts along with the two primary power circuits. Sequencing within auxiliary positions
Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
RT series Miniature Printed Circuit Board Relays, Sockets and Accessories
s 查询 RT40 供应商 捷多邦, 专业 PC 打样工厂,4 小时加急出货 RT series Miniature Printed Circuit oard Relays, Sockets and ccessories pplied Coil Voltage (% of rated nom.) RT series (DC Coil) 6 mp PC oard Miniature Relay Meets
BNC Connectors (50 ohm/75 ohm)
BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors
HMI Components. Series. Raised design PCB (with adaptor) Machinery and Automation. Indicator Illuminated pushbutton
Edition 10/2016 HMI Components 41 Series Characteristics The rectangular design of the Series 41 (18 x 24 mm) makes it especially suited: Raised design PCB (with adaptor) Functions The Series 41 incorporates
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. RoHS compliant
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES RoHS compliant FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL pitch terminals
FBR211 SERIES 1 POLE MINIATURE RELAY. 1 to 2 A (FOR SIGNAL SWITCHING) 1 to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS)
MINIATURE RELAY POLE FBR2 SERIES to 2 A (FOR SIGNAL SWITCHING) to 3 A (FOR AUTOMOTIVE SWITCHING) FEATURES (FOR SIGNAL APPLICATIONS) 2 A maximum carrying current Capable of 2 A maximum continuous carrying
D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series
Crimp and Poke, Right-Angle and Vertical PCB D*U Series Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with
JY SERIES 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) POWER RELAY. Lead Free / RoHS compliant* FEATURES ORDERING INFORMATION
POWER RELAY 1 POLE 3, 5 A (MEDIUM LOAD CONTROL) JY SERIES Lead Free / RoHS compliant* FEATURES UL, CSA, VDE recognized High sensitivity and low power consumption High isolation Wide operating range DIL
Notch Bollard LED 5YEAR LED WARRANTY. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: ft.
Date: Customer: Project: Type: Qty: Order Code: T Series - - - - - - - - T Pole Order Code: - - - Series Height Finish Options Height ft. ft. ft. ft. ft. ft. *For other heights, please consult factory
Safety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
NA SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS Compliant FEATURES ORDERING INFORMATION SAFETY STANDARD AND FILE NUMBERS
MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS Compliant FEATURES Slim type relay for high density mounting Conforms to Bellcore specification and FCC Part 68 Dielectric strength 1,500 VAC
onlinecomponents.com
Short-Circuit Current Ratings and Feeder Spacing SCCR Information: Power Distribution Blocks with SCCR and Feeder Spacing The requirements of the National Electric Code (NEC) and UL508A now require many
FM series position switches
FM series position switches Selection diagram 0 08 0 A A 0 A 0 External rubber gasket External rubber gasket External rubber gasket External rubber gasket 0 69 Round rod, stainless steel Square rod Glass
DXRL (DPM-RL) DMX RELAY DRIVER With optional 0-10 Volt Converter. ELM Video Technology, Inc. Innovative DMX and MIDI Products DESCRIPTION SETTINGS
.xx DESCRIPTIO The DXR (DPM-R) is a DMX to relay driver and controller, with an optional 0 to 10 volt converter. Control 12VDC relays up to 100mA each from any DMX console or any DMX generating device.
LGH High Voltage Connectors
Introduction Product Facts No exposed high voltage parts Space saving maximum performance from small size and weight Fast connect and disconnect Wide temperature range -67 F to +257 F [-55 C to +5 C],
L SERIES HANDLE. Technical Information
L SERIES HANDLE, Saanichton, British Columbia, Canada V8M 2A4 Phone: 250-544-2207 Fax: 250-544-2279 Doc #550.0063 Rev. 06/20/2011 R3 L Series Handle Sure Grip "L" Series Control Grip is our Large handle
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Exceeds Category 5 performance
PRODUCT SPECIFICATION
ipass TM 0.8 mm PITCH I/O CONNECTOR REVISION: ECR/ECN INFORMATION: EC No: UCP200-137 DATE: 200 / 02 / 08 TITLE: 1 of 14 TABLE OF CONTENTS 1.0 SCOPE 3 2.0 PRODUCT DESCRIPTION 3 2.1 PRODUCT NAME AND SERIES
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
General Specifications
Series F General Specifications Electrical apacity (Resistive Load) Low/Logic Level: m @ V D Other Ratings ontact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life:
SAFETY SHIELD FOR 12, 14 AND 16 WOOD LATHES
PART O. 1340198(013) 46-896 SAFETY SHIELD FOR 12, 14 AD 16 WOOD LATHES ITRODUCTIO The 46-896 Safety Shield (Fig.1) is an accessory for Delta 12 and 16 wood lathes. The shield can also be retrofitted to
RTBH Series 1-2 Pole Coded Rotary Switches Features/Benefits
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
67TD Series - Miniature Time Delay Relays DPDT, 4PDT, 5 Amp
TD Series - Miniature Time Delay Relays DPDT, PDT, mp E When small size is a requirement series relays fit where others won t. The miniature ice cube timers are capable of handling up to amps. Typical