Sectional Terminal Blocks

Transcription

1 ectional Terminal locks General Information: ectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required number of circuits. Marathon s DIN ectional locks will fit on a standard 35mm DIN rail. Marathon offers three sizes of sectional terminal blocks: 3/8 centers, 1/2 centers and 11/16 sectional fuse holders. ll blocks can be ordered with a channel mount base, or a flat mount base for direct mounting to the panel. The 3/8 is also available with a DIN foot. Ratings and tandards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. ectional Terminal locks Class ervice equipment including deadfront switchboards, panel boards, service entrance devices. Class Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. pacing Requirements*: Voltage Thru ir Over urface Class Class Class C *In Inches pplications: Designed for electrical termination of wire where flexibility of circuit design is necessary. ccepts single or multiple wire sizes for tubular screw and tubular clamp styles.

2 ectional Terminal locks 3/8 ectional Channel (C), Flat (F), & DIN Mount 600 Volts C/DC 32 Circuits per Foot pecifications: Meets IP20 Probing Requirement Wire Termination Torque 16 lb-in UL Recognized File No. XCFR2.E62806 C Certified File No. LR19766 RoH Compliant 6G38 T F Tubular crew Connector (6G38 T) Materials: ase - Gray Thermoplastic, 1 C (UL RTI) Tubular crew Connector- Copper, Tin Plated crew - #10-32 teel, Nickel Plated Ordering Code: Wire Ranges: 50 mps (40 mps C) ingle and Multiple Wire Combinations: tranded CU olid CU (1) #8 - #18 WG (1) #10 - #16 WG (1-3) #12 WG (1-3) #12 WG (1-4) #14 WG (1-4) #14 or #16 WG 6G38 T F Flat mount block td pk 100 ee Figure 2 On Page 115 6G38 T C Channel mount block td pk 100 ee Figure 1 On Page 115 6G38 T DIN DIN mount block td pk ee Figure 3 On Page 115 ectional Terminal locks Kant Kut Connector (6G38 TKK) Materials: ase - Gray Thermoplastic, 1 C (UL RTI) Kant Kut Connector- Copper, Tin Plated crew - #10-32, Nickel Plated, Pad - teel Ordering Code: Wire Ranges: 40 mps ingle and Multiple Wire Combinations: tranded CU olid CU (1) #10-#22 WG (1) #10 - #14 WG (1-2) #12 WG (1-2) #12 or #14 WG (1-3) #14 WG (1-4) #16 WG (1-5) #18 or #22 WG WIRE PROTECTOR 6G38 TKK F Flat mount block td pk 100 ee Figure 2 On Page 115 6G38 TKK C Channel mount block td pk 100 ee Figure 1 On Page 115 6G38 TKK DIN DIN mount block td pk ee Figure 3 On Page 115

3 ems Pressure Connector (6H38 P) ectional Terminal locks Materials: White Nylon, 105 C (UL RTI) Connector - rass, Tin Plated crew - #6-32 with Pad, teel Nickel Plated Wire Ranges: mps (1) #12 - #22 WG Ordering Code: 6H38 P F Flat mount block td pk 100 ee Figure 2 On Page 115 6H38 P C Channel mount block td pk 100 ee Figure 1 On Page 115 Not available with a DIN Mounted ase ectional Terminal lock ccessories Catalog # Description td. Pack Qty. J 38 Jumper for T & TKK 50 ectional Terminal locks MC MPC-3 (3 ft channel) MPC-6 (6 ft channel) M 2 MN35-2 Mounting Clamp (For channel style only) Channel 1 Vinyl Marking trip (1/2 x 2 white) DIN Rail, 35 x 7.5 mm 2 m long, slotted MK35 End bracket for DIN mount base 6G38 E C 6G38 E F 6G38 E DIN 6H38 E F 6H38 E C End sections for 6G38 versions P E C I L P R O D U C T CT# End sections for 6H38 versions

4 ectional Terminal locks ectional Terminal lock Dimensions - 6G38 T & TKK FIGURE 1: Channel Mount =.78 + (.375 X No. of Lines) [19.8] + [9.5 X No. of Lines) Ø =.36 + (.375 x No. of Lines) [9.1] + [9.5 X No. of Lines) TYP FIGURE 2: Flat Mount =.78 + (.375 X No. of Lines) [19.8] + [9.5 X No. of Lines) Ø =.36 + (.375 x No. of Lines) [9.1] + [9.5 X No. of Lines) ectional Terminal locks TYP. FIGURE 3: DIN Mount =.22 + (.375 X No. of Lines) [5.6] + [9.5 X No. of Lines) TYP =.62 [15.7]

5 ectional Terminal lock Dimensions - 6H38 ectional Terminal locks FIGURE 4: =.79 + (.375 x E) =.36 + (.375 x E).18 [ 4.6] 1. [31.8] ectional Terminal locks FIGURE 5: 1. [31.8] =.79 + (.375 x E) =.36 + (.375 x E).21 X.34 [5.3 X 8.6] 1. [31.7].37 [9.4] 1.56 [39.7] [30.7]

6 PECIL PRODUCT PECIL PRODUCT ectional Terminal locks 1/2 ectional 600 Volts C/DC 24 Circuits per Foot pecifications: ase, White Nylon - Type 6/6 105 o C Tubular crew (TCU) Copper, Tin Plated; crew #1/4-28 teel, Nickel Plated Wire Range #4-#16 WG Copper, 70 mps Torque 20 lb-in UL Recognized File No. XCFR2.E62806 C Certified File No. LR19766 RoH Compliant Catalog # Description td Pk 6H12 TCU C Catalog # Description td Pk 6H12 TCU F For flat mount block 6H12 TCU C For channel mount block 6H12 E F For flat mount block 6H12 E C For channel mount block Flat Mount: Tubular crew Tubular crew End ection End ection J 12 MC MPC-3 (3 ft channel) MPC-6 (6 ft channel) M 2 Channel Mount: Jumper Mounting Clamp Channel Vinyl Marking trip - 1/2 x ectional Terminal locks.18 [ 4.6].21 X.34 (5.3 X 8.6) =.91 + (0 x E) =.37 + (0 x E) PECIL PRODUCT 1. [31.8] 1 =.91 + (0 x E) =.37 + (0 x E) 1.91 [23.1] 1.56 [39.7] PECIL PRODUCT [30.7]

7 11/16 ectional Fuse Holder 600 Volt, 30 mp (Midget Fuse Holder) ectional Terminal locks pecifications: Tested and pproved for 10,000 mp Withstand Rating ase, White Nylon - Type 6/6 105 o C Connector ox Type ccepts up to #10 WG Wire, either Terminated or Non-Terminated Clip, Copper lloy, Tin Plated UL Recognized File No. IZLT2.E35113 C Certified File No. LR21455 RoH Compliant 6W301F with end piece (fuse not included) ectional Terminal locks tandard Description td Pack Wire Range Fuse ize Fuses 6W301F 6W301C 6WEF 6WEC MC MPC-6 MPC-3 GR-2 Flat Mount Channel Mount End Piece (flat) End Piece (channel) Mounting Clamp 6 Foot Channel 3 Foot Channel 1/8 Diameter X 2 Long Nylon Rod 10 - #10-#14 WG CU TRNDED 13/32 DI Y 1 1/2 LONG 13X-2, Z-2, 60Q-2, 6Y-2, GU, TM, TQ, F, N, LF, LN, L, FL, FLM, FLQ, FNM, FNQ, GFN, GGO, KLK, KLKD, KLQ, KTK, OTM, TRM For electronic drawings or 2D/3D CD data, send request to MarathonP. "L".34 [8.6] "C" Flat Mount: L = (0.68 X N) C = (0.68 X N).21 [5.3] 1.00 [.4] 2.00 [50.8] N = No. of Poles Channel Dimensions: LCH = L [17.4].17 [4.3] 2.80 [71.1] 2.00 [50.8] 13/32 x 1-1/2 FUE [49.5] 1.70 [43.2] PECIL PRODUCT 2.03 [51.6].40 [10.2].08 [2.0].88 [22.4]