ENGINEERING CATALOG March, 2008

Transcription

1 ENGINEERING CATALOG March, 008 What s New: Flexible Stranded Wire UL Rating Information SCCR with Fuses or Circuit Breakers Datasheets on FUSE HOLDERS POWER BLOCKS TERMINAL BLOCKS CUSTOM PRODUCTS

2 Table of Contents General Information - 4 Flexible Stranded Wire - NEW 5-6 Fuse Holders General Information 7-8 Class H & K - 50 Volt 9 Class H & K Volt 0 Class H & K Fuse Panels - Class R - 50 Volt Class R Volt 4 Class H, K & R Dimensions 5-7 Class T - 00 Volt 8 Class T Volt 9 Class T Dimensions 0 - Class J Volt - NEW M Holder Volt 4 Midget Enclosed Holder Volt 5 Midget Holder Sectional Volt 6 CC Holder Volt 7 CC Enclosed Holder Volt 8 Class G 9 M, CC, Class J & G Dimensions 0 - Semi Conductor Fuse Holder Box Semi Conductor Fuse Holder Stud -,000 Volt 4 Fuse Holders with BD Connectors 5 Forklift/Semi Conductor Fuse Holder 6 Fuse Holder Covers 7-8 DIN Rail Adapter 9 Class CC, G and Midget Accessories 9 Short Circuit Current Ratings - NEW 40 UL Listed Power Blocks - NEW 4-4 Power Blocks General Information 4 Power Distribution Blocks Power Blocks (Splicer) Power Stud Blocks 49 Power Splicer/Stud Blocks 50-5 Power Stud to Distribution Blocks 5 IEC EPB Series Power Block - NEW 5 Power Block Covers 54 Grounding Lugs - GL 55 Power Block Dimensions Heavy Duty Terminal Blocks General Information Series 6 0P & 00 Series RZ Series - NEW GP Series Series Series Series 67 Single and Double Row Terminal Blocks General Information - Single Row 68 4 Series Series (799 Riveted) Series (899 Riveted) 7 8 Series (9 Riveted) Series Series Series General Information - Double Row 78 00/670A GP Series 79 00/67 GP Series HB Series 8 00/67 GP Series Series 8 40 GP Series GP Series A GP Series (800A Riveted) GP Series (80 Riveted) GP Series (80 Riveted) GP Series 89

3 Table of Contents Single and Double Row Terminal Blocks (con t) 604 GP Series GP Series 9 6 RZ Series 9 670A RZ Series 9 67 RZ Series RZ Series 95 Terminal Block Accessories General Information Kliptite/Quick Connect 96 Single Row Kliptite/Quick Connect 97 Double Row Kliptite/Quick Connect 98 Solder Terminals (ST & /4 ST) 99 Solder Terminals (Y, YSY, Z) 00 J, RJ, RJS Jumpers, Wire Clamp, Straddle Plate 0 Fanning Strips 0 Stud & Turret Terminal Blocks 0 Top Mounted Covers 04 Sub Mounted Marking Strips 05 Top Mounted Marking Strips 06 Kulka Marking and Insulator Strips 07 Kulka Single Row Marking Strip Dimensions 08 Kulka Double Row Marking Strip Dimensions 09 Marking Styles 0 Terminal Block Printing Sectional Terminal Blocks General Information /8" Sectional Blocks - NEW - 7 /" Sectional Block 8-9 /6" Sectional Fuse Holder 0 DIN Rail Terminal Blocks General Information MIK MIK5 MIK0 4 MIK6 5 MIK5 6 DIN Rail Disconnect - MIKTS4 7 Fuse Terminal Block - MIKSI5 8 MIKE4 8 MIKE0 8 MIKE6 8 DIN Accessories 9 Military and Navy Class Terminal Blocks General Information - Military Class 0 7TB B & 40TB B Series 7TB F & 8TB F Series 9TB F & 40 TB F Series 4TB F & 4TB F Series 4 LD, LS Options 5 General Information - Navy Class 6 TB, 4TB, 5TB, 6TB Series 7 7TB, 8TB, 9TB, 0TB, TB Series 8 5TB, 6TB, 7TB, 5TB, 6TB Series 9 Studded Power Feed Thru Terminal Blocks General Information - ST7 Family/Cover 40 ST7B Series (back mount) 4 ST7S Series (slide-in mount) 4 ST7E Series (end mount) 4 ST75S90 44 ST7B8 Series 45 Single Stud Connection Block 45 Index Terms and Conditions Warnings and Cautions 50

4 General Information Marathon Special Products, a Regal Beloit Company, has served the electrical/electronic component industry for over 70 years. Our facility in Bowling Green, Ohio contains all manufacturing and warehousing operations including an extensive electrical test lab. We offer a broad range of fuse holders and terminal blocks, including Kulka terminal blocks. In addition, we have the expertise to design and manufacture non-standard products for specific customer applications. On February, 994, Marathon Special Products was registered to ISO standards. 900:000 quality standards. We are currently registered to ISO Marathon Special Products also offers a line of DIN sectional terminal blocks. Agency Approvals: The majority of products manufactured by Marathon Special Products are Underwriters Laboratories and Canadian Standards Association approved. The approval status of products can be found throughout the catalog. Below are the different approval forms and brief descriptions. UL UR CSA Listed by Underwriters Laboratories, products are qualified for use in equipment without end-use agency approval when applied within products rated performance. Recognized by Underwriters Laboratories, suitable for use only in end-use equipment where Underwriters Laboratories determine acceptability of the combination. Certified by Canadian Standards Association, suitable for use in other equipment where Canadian Standards Association determines the suitability of the combination. Compliance with European Union Low Voltage Directive. Tightening Torque: Recommended tightening torque is listed for all products, either on the carton label or the product label. All torque recommendations are based on UL 486. In some cases, because of various connector designs, our recommended torque is different from the torque tables shown in UL 486. However, these products passed the heating cycling and static heating tests as specified in UL 486. Wire Ampacity: The ampacity of a wire is its current carrying capacity with reference to the cross sectional area of the conductor(s), the temperature rating of the insulation and ambient temperature. Marathon specified wire ranges are based on UL approved tests using 75 C wire. Wires with temperature ratings other than 75 C are approved while observing NEC Article 0 wire tables for allowable ampacities of insulated conductors. Marathon voltage and amperage ratings remain constant and are independent of the temperature rating of the wire used in application. Wire gauges and type must remain within the Marathon specified ranges to be UL approved. However, UL approval for higher currents may be obtained in some end-use applications.

5 General Information Wire Chart: Stranded wire sizes and ampacity for 75 C copper wire. Tolerances for Catalog Dimensions: Length Dimensions Tolerance All Other Dimensions Tolerance ±.00 X.X ± ±.050 X.XX ± ±.060 X.XXX ±.00 Note: Catalog Dimensions are for Guidance only and are not to be construed as inspection standards. This catalog is intended to present product data that will help the end user with design application. Since changes to products occur, it is recommended that the end user request samples for evaluation. Marathon Special Products reserves the right to change or update without notice. Please visit for the most up-to-date product information. 4

6 Wire Connectors Investigated for Flexible Stranded Wire Screw-type mechanical pressure wire connectors investigated to UL 486A-B for flexible stranded wire UL 508A (Industrial Control Panels), Section 9.. Flex Wire Affected Standards: UL 486A-486B (Wire Connectors Standard) UL 508A (Industrial Control Panels Standard) UL 059 (Terminal Block Standard) NEC (National Electric Code) 0. (A)7 and (B) NEC 690 (in 008) Until now, to be UL and NEC compliant while using flexible stranded wire, it was necessary to use crimp-type ring lugs investigated for flexible stranded wire. By using Marathon s UL 486A-B investigated screw-type pressure connectors in place of crimp lugs, you can save up to 66% of termination costs in material and labor. Marathon s wire approvals, in addition to Classes B and C, now include stranding Classes G, H, I and K. The photo shows two distinctly different stranding classes, both 50 kcmil. The wire on the left, Class B, has 6 strands. The wire on the right, Class K, has approximately 499 strands. A table providing information on wire sizes, Classes and strand count can be found on the reverse side. 9.. Flexible conductors, including welding cable and machine tool wire identified as Flexing or Class K, shall be retained by terminals that have been evaluated to the Standard for Wire Connectors, UL 486A-486B for the size and type of conductors involved. Added 9.. effective March, 007 For specific rating information visit our website and click to view product data sheets. 5

7 Copper Stranded Wire Classes Flex Wire AWG/kcmil Rigid Stranded Flexible Stranded CSA Class Class Class Class Class Class Compact B C G H I K Wire Number of Number of Number of Number of Number of Number of Number of Wire Gauge Strands Strands Strands Strands* Strands* Strands* Strands* Gauge 0 AWG AWG / /0 / /0 / /0 4/ /0 50 kcmil kcmil 00 kcmil kcmil 50 kcmil kcmil 400 kcmil kcmil 500 kcmil kcmil 600 kcmil kcmil 750 kcmil kcmil,000 kcmil ,000 kcmil mm Rigid Flexible Class Class 5 Wire Number Number of Wire Gauge of Strands Strands* Gauge.50 mm mm *Specific quantity of strands for Classes G, H, I, K and 5 vary by manufacturer. For additional information on copper stranded wire classes and approvals on Marathon products go to 6

8 Fuse Holders General Information: Marathon has been manufacturing quality fuse holders for over 40 years. The key word is quality. It is incorporated into every Marathon Fuse holder, right along with design. Fuse Holders The product line includes a broad range of holders to accommodate the following fuses: Class H, K, R, T, J, CC, G, CD, M (Miscellaneous) and Semi-Conductor holders. The majority of these fuse holders are available in 50 and 600 volts at current ratings from 0 through 600 Amperes. The Class R, T, J, CD, CC and Semi-Conductor fuse holders have passed 00,000 ampere high current interrupt testing in accordance with UL 5, the fuse holder Standard. Class R and CC fuse holders have a rejection feature, which prevents the insertion of a fuse with lower interrupting rating. Class T and J fuse holders prevent the use of fuses with lower interrupting rating because of their unique size. Fuse Clips: Marathon s 0 and 60 Amp fuse holders are equipped with the patented Cool-Clip design. The heat generated in a fuse clip can actually reduce the life of the fuse, the clip and the conductor, as well as the protection power of the fusing device. No longer is it necessary for heat build-up to rob equipment of protection and extended life. Reinforcing members are available for most Marathon fuse holders and are recommended for use where an improved performance is desired or more severe conditions exist. They are recommended for electric heat or where high ambient temperatures are present. To comply with Automotive Industry Standard ET- use the following options: Class H Holder with Reinforcing Member 0 Amp use SP Connectors or Copper Box Connectors 60 Amp use Copper Box Connectors 7

9 Fuse Holders Fuse Holders Wire Connectors: Marathon fuse holders are available with five types of wire connectors. S Screw Connector An economical connector for use with a wire, or either a ring or spade type terminal. Screw is #0- steel. SQ Screw Connector w/quick Connects Same as screw connector with additional quick connect options. SP Sems Pressure Connector A positive pressure connector eliminating the need for a wire terminal. Ideal for use where there is a vibration problem. Sems pressure screw is #0- steel. SPQ Sems Pressure Connector w/quick Connects Same as Sems connector with additional quick connect options. B Box Connector Suitable for use with stranded or solid wire. Connector is aluminum tin plated. Copper Box Connectors are available on 0 and 60 amp fuse holders. Add CU after the catalog number. Wire Ranges: All wire ranges shown in the fuse holder section are the ranges of the wire that the connector will accept or that is recommended for the fuse holder assembly. Ordering Code: Reinforcing Amp Connector Member Rating Style R F 0A B CU Designates Class H # of Poles Copper Box Fuse Holder Connector F = 50 Volt Rating (Optional) 6F = 600 Volt Rating Applications: Marathon fuse holders can be used in various applications, including control panels, lighting and heating circuits, motor circuits, circuit breaker protection, switchgear equipment, appliances, electric heat, air conditioning and refrigeration equipment, elevator systems and transformer protection. 8

10 Class H & K Fuse Holders - 50 Volt Are Approved for 0,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 Fuse Holders 0 & 60 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: 00 Amp: 400 & 600 Amp: Catalog#: Clip, Copper Alloy, Tin Plated, with reject pin Clip, One Piece Aluminum, Tin Plated Clip, Copper Alloy, Tin Plated Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses F0AS RF0AS F0AS RF0AS #0-# AWG CU F0AS RF0AS F0ASP RF0ASP F0ASP RF0ASP 0 #0-#4 AWG CU 9/6 DIA BY F0ASP RF0ASP F0AB RF0AB F0AB RF0AB Thermoplastic #6-#4 AWG CU AY F0AB RF0AB CRN F60ASQ* RF60ASQ* NLN F60ASQ* RF60ASQ* #0-# AWG CU NON F60ASQ* RF60ASQ* NRN 60 /6 DIA BY F60AB RF60AB OT #-#4 AWG CU F60AB RF60AB OTN #-# AWG AL F60AB RF60AB RLN RF00AB RF #/0-#4 AWG CU RF00AB 00 Phenolic DIA BY 5 7/8 #/0-# AWG AL RF00AB F00ABE SAME 50 kcmil - / DIA BY 00 Polyester F00ABE #6 AWG CU AL 7 /8 RF400AB () 50 kcmil - / DIA BY 400 RF400AB #6 AWG CU AL 8 5/8 Phenolic F600AB () 500 kcmil - 9/ DIA BY N/A 600 F600AB #4 AWG CU AL 0 /8 *UL Recognized File No. IZLT.E5 Contact Factory for Stud Options - see pages 5-7 for dimensional information See page 7 for available covers See page 9 for DIN Rail Adapter 9

11 Class H & K Fuse Holders Volt Fuse Holders Are Approved for 0,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 0 & 60 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: Clip, One Piece Aluminum, Tin Plated 400 & 600 Amp: Clip, Copper Alloy, Tin Plated Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6F0AS R6F0AS 6F0AS R6F0AS #0-# AWG CU 6F0AS R6F0AS 6F0ASP R6F0ASP 6F0ASP R6F0ASP 0 #0-#4 AWG CU /6 DIA BY 5 6F0ASP R6F0ASP 6F0AB R6F0AB A6Y Phenolic 6F0AB R6F0AB #6-#4 AWG CU CRS 6F0AB R6F0AB NLS 6F60AB R6F60AB NOS #-#4 AWG CU /6 DIA BY 6F60AB R6F60AB 60 NRS #-# AWG AL 5 / 6F60AB R6F60AB OTS R6F00AB RES #/0-#4 AWG CU / DIA BY R6F00AB 00 RFS #/0-# AWG AL 7 7/8 R6F00AB RLS 6F00ABE SAME 50 kcmil - /4 DIA BY 00 Polyester 6F00ABE #6 AWG CU AL 9 5/8 R6F400AB () 50 kcmil - 9/ DIA BY 400 R6F400AB #6 AWG CU AL 5/8 Phenolic 6F600AB () 500 kcmil - 7/6 DIA BY N/A 600 6F600AB #4 AWG CU AL /8 Contact Factory for Stud Options - see pages 5-7 for dimensional information See page 7 for available covers 0

12 Class H & K Fuse Panels 0 and 60 Amp-50 Volt Base, General Purpose Phenolic, 50 C Patented Cool-Clip Design Clip, Copper Alloy, Tin Plated Reinforcing Member Available Bus Bars are Available with #/0 - #4 AWG or 50 kcmil - #6 Wire Ranges Consult Factory for Special Requirements UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Fuse Holders Ordering Code: Reinforcing Member Class H Fuse Distribution Panels Number of Poles,, 4, 5 or 6 R H 4 0 B L Amp Rating of Poles 0 = 60 Amps All Poles = 0 Amps All Poles = 0,60 Any Combination = 0, 60, 60 Any Combination Load Termination S = Wire Binding Screw B = Box Connector # - 4 CU #6-4 CU P = SEMS Pressure Screw Q =.50 Male Quick Connect C = Combination of the Above (consult factory) Entry of Bus Bar (Only if Bused) F-Front L-Lateral Line Terminations Code Same As Load Termination. Omit if line Termination is Same as Load (S, B, P, Q or C). OR Busing Arrangements = Special Busing (consult factory) = Poles Bused by Pairs = Poles Bused by Threes 4 = Poles Bused by Fours

13 Class H & K Fuse Panels (Cont.) Fuse Holders 0 and 60 Amp-50 Volt Poles Dimensions (IN) (MM) Poles Dimensions (IN) (MM) No. L No. L Dimensions (IN) (MM) Fuse Distribution Panel Options Circle/Indicate one item per pole and number of poles. The items to be indicated are within the rectangles. Bussing is only available on line side. If bussing, indicate lug size /0 or 50 kcmil (F = Front entry, L = Lateral entry) Consult factory for other modifications.

14 Class R Fuse Holders - 50 Volt Have Been Tested & Approved for 00,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 Fuse Holders 0 & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Clip, Copper Alloy, Tin Plated, with Reject Pin 00 Amp: Clip, One Piece Aluminum, Tin Plated, with Reject Pin 400 & 600 Amp: Catalog#: Clip, Copper Alloy, Tin Plated, with Reject Pin Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses R0AS R0AS #0-# AWG CU R0AS R0ASP R0ASP 0 Thermoplastic #0-#4 AWG CU 9/6 DIA BY R0ASP R0AB AD-R R0AB #6-#4 AWG CU AK-R R0AB DLN-R R60ASQ* FLNR R60ASQ* SAME #0-# AWG CU FRN-R R60ASQ* KLNR 60 Thermoplastic /6 DIA BY R60AB KTS-R #-#4 AWG CU R60AB LLNRK #-# AWG AL R60AB LPN-RK R00AB TLN #/0-#4 AWG CU R00AB 00 Phenolic DIA BY 5 7/8 TR-R #/0-# AWG AL R00AB R00ABE 50 kcmil - / DIA BY 00 Polyester R00ABE #6 AWG CU AL 7 /8 R400AB () 50 kcmil - / DIA BY 400 R400AB #6 AWG CU AL 8 5/8 Phenolic R600AB () 500 kcmil - 9/ DIA BY N/A 600 R600AB #4 AWG CU AL 0 /8 *UL Recognized File No. IZLT.E5 Contact Factory for Stud Options - see pages 5-7 for dimensional information See page 7 for available covers See page 9 for DIN Rail Adapter

15 Class R Fuse Holders Volt Fuse Holders Have Been Tested & Approved for 00,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 0 & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Clip, Copper Alloy, Tin Plated, with Reject Pin 00 Amp: 400 & 600 Amp: Clip, One Piece Aluminum, Tin Plated, with Reject Pin Clip, Copper Alloy, Tin Plated, with Reject Pin Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6R0AS 6R0AS #0-# AWG CU 6R0AS 6R0ASP 6R0ASP 0 Phenolic #0-#4 AWG CU /6 DIA BY 5 A6D-R 6R0ASP A6K-R 6R0AB DLS-R 6R0AB #6-#4 AWG CU FLSR 6R0AB FLSR_ID 6R60AB SAME /6 FRS-R #-#4 AWG CU 6R60AB 60 DIA BY IDSR #-# AWG AL 6R60AB 5 / KLSR Phenolic 6R00AB KTS-R #/0-#4 AWG CU / DIA BY 6R00AB 00 LLSRK #/0-# AWG AL 7 7/8 6R00AB LLSRK_ID 6R00ABE 50 kcmil - /4 DIA BY LPS-RK 00 Polyester 6R00ABE #6 AWG CU AL 9 5/8 TRS-R 6R400AB () 50 kcmil - 9/ DIA BY 400 6R400AB #6 AWG CU AL 5/8 Phenolic 6R600AB () 500 kcmil - 7/6 DIA BY N/A 600 6R600AB #4 AWG CU AL /8 Contact Factory for Stud Options - see pages 5-7 for dimensional information See page 7 for available covers 4

16 Class H, K and R Fuse Holder Dimensions Figure A B C D E F G H I J K L F0A POLE RF0A POLE SEE FIGURE # R0A POLE F60A POLE.48 RF60A POLE FIG N/A N/A.8 DIA THRU. R60A POLE DIA X. 6 C BORE RF00A POLE.9 R00A POLE FIG N/A N/A.8 DIA THRU.6 POLE DIA X.59 C BORE F00A POLE.00.8 DIA THRU.6 FIG N/A N/A R00A POLE DIA X.8 C BORE RF400A POLE DIA THRU FIG N/A N/A 5/6 HEX R400A POLE DIA X.44 C BORE.9 F600A POLE DIA THRU FIG N/A N/A /8 HEX R600A POLE DIA X.44 C BORE.9 6F0A POLE.6..5 N/A.4.8 DIA THRU R6F0A POLE FIG N/A N/A.50 DIA X.44 C BORE 6R0A POLE 4.5 N/A.5. N/A.5 6F60A POLE.95 N/A.8 DIA THRU R6F60A POLE FIG N/A N/A.50 DIA X.50 C BORE 6R60A POLE POLE. N/A R6F00A 6R00A POLE FIG N/A N/A.8 DIA THRU.59 DIA X.64 C BORE POLE F00A POLE.00. DIA THRU FIG N/A N/A 6R00A POLE DIA X.44 C BORE.6 R6F400A POLE DIA THRU FIG N/A N/A 5/6 HEX 6R400A POLE DIA X.44 C BORE.9 6F600A POLE DIA THRU FIG N/A N/A /8 HEX 6R600A POLE DIA X.44 C BORE.9 MM = Dim X 5.4 Fuse Holders Pole Pole Pole Figure : 5

17 Class H, K and R Fuse Holder Dimensions Fuse Holders Pole Pole Pole Figure : Pole Pole Pole Figure : 6

18 Class H, K and R Fuse Holder Dimensions Fuse Holders Pole Pole Figure 4: Pole Pole Figure 5: 7

19 Class T Fuse Holders - 00 Volt Fuse Holders Have Been Tested & Approved for 00,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 0 & 60 Amp: Clip, Copper Alloy, Tin Plated, with Patented Reject Member 00 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt /4-0 X /, /4 Belleville Washer 00 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt, 5/6-8 X /4 Hex Head, 5/6 Belleville Washer 400 & 600 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt, /8-6 X /4 Hex Head Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses T0AB RT0AB / DIA BY 0 T0AB RT0AB #-#4 AWG CU 7/8 T60AB RT60AB #-# AWG AL 9/6 DIA BY 60 T60AB RT60AB 7/8 T00AB #/0-#4 AWG CU /6 DIA BY AT 00 T00AB #/0-# AWG AL 5/ JJN Phenolic T00AB 50 kcmil /6 DIA BY JLLN 00 T00AB #6 AWG CU AL 7/6 N/A () 50 kcmil - / DIA BY T400AB 400 #6 AWG CU AL /4 () 500 kcmil - 9/64 DIA BY T600AB 600 #6 AWG CU AL /6 See pages 0- for dimensional information 8

20 Class T Fuse Holders Volt Have Been Tested & Approved for 00,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 Fuse Holders 0 & 60 Amp: Clip, Copper Alloy, Tin Plated 00 Amp: 00 Amp: Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt /4-0 X / Bolt /4 Belleville Washer Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt 5/6-8 X /4 Hex Head 5/6 Belleville Washer 400 & 600 Amp: 00 amp shown Connector, One Piece Aluminum with Integral Heat Sink, Tin Plated Bolt /8-6 X /4 Hex Head /8 Belleville Washer Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6T0AS R6T0AS 6T0AS R6T0AS #0-# AWG CU 6T0ASP R6T0ASP 9/6 DIA BY 0 #0-#4 AWG CU 6T0ASP R6T0ASP / 6T0AB R6T0AB 6T0AB R6T0AB #-#4 AWG CU R6T60AB #-# AWG AL /6 DIA BY A6T SAME 60 R6T60AB 9/6 JJS Phenolic 6T00AB #/0-#4 AWG CU /6 DIA BY JLLS 00 6T00AB #/0-# AWG AL 6/64 6T00AB 50 kcmil - /6 DIA BY 00 6T00AB #6 AWG CU AL /4 N/A () 50 kcmil - 9/64 DIA BY 6T400AB 400 #6 AWG CU AL 5/8 () 500 kcmil - 5/64 DIA BY 6T600AB 600 #6 AWG CU AL 6/64 See pages 0- for dimensional information 9

21 Class T Fuse Holder Dimensions Fuse Holders Figure A B C D E F G H I J T0A POLE RT0A POLE FIG. SEE FIGURE # T60A POLE RT60A POLE FIG.8 SEE FIGURE # T00A POLE.7 N/A 0.0 THRU /6 FIG POLE X.44 C BORE HEX 0.9 T00A POLE.50 N/A 0.8 THRU 5/6 FIG POLE X.44 C BORE HEX 0.9 T400A POLE FIG N/A 0.8 THRU 0.50 X.44 C BORE N/A 0.9 T600A POLE FIG THRU 0.50 X.44 C BORE N/A 0.9 6T0A POLE R6T0A POLE FIG 5.8 SEE FIGURE #5 POLE R6T60A POLE FIG 5.74 SEE FIGURE #5 6T00A POLE.7 N/A 0.0 THRU /6 FIG POLE X.44 C BORE HEX 0.9 6T00A POLE.50 N/A 0.8 THRU 5/6 FIG POLE X.44 C BORE HEX 0.9 6T400A POLE FIG N/A 0.8 THRU 0.50 X.44 C BORE N/A 0.9 6T600A POLE FIG THRU 0.50 X.44 C BORE N/A 0.9 MM = Dim X 5.4 0

22 Class T Fuse Holder Dimensions Fuse Holders Pole Pole Figure : Pole Pole Figure :

23 Class T Fuse Holder Dimensions Fuse Holders Figure : Figure 4: Pole Pole Figure 5:

24 Class J Fuse Holders Volt Have Been Tested & Approved for 00,000 Amp Withstand Rating Patented Cool-Clip Design UL Listed File No. IZLT.E5 CSA Certified File No. LR455 0 & 60 Amp: Clip, Copper Alloy, Tin Plated 0 Amp: 00 Amp: Integral DIN Rail Mount Expander Block Clip, Copper Alloy, Tin Plated -pole molding incorporates a dovetail feature for ganging multiple poles 00 Amp: Connector, One Piece Aluminum, Tin Plated (optional one piece copper, nickel plated add CU ) - consult factory FBD, Fuse Bolt-Down Construction 400 and 600 Amp: Catalog#: Connector, One Piece Aluminum, Tin Plated (optional one piece copper, nickel plated add CU ) - consult factory FBD, Fuse Bolt-Down Construction Fuse Holders Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6J0AS R6J0AS 6J0AS R6J0AS 6J0AS R6J0AS #0-# AWG CU 6J0AES R6J0AES Expander 6J0ASP R6J0ASP 6J0ASP R6J0ASP 0 #0-#4 AWG CU /6 DIA BY /4 6J0ASP R6J0ASP Thermoplastic 6J0AESP R6J0AESP Expander 6J0AB R6J0AB A4J 6J0AB R6J0AB AJT #6-#4 AWG CU 6J0AB R6J0AB JKS 6J0AEB R6J0AEB Expander JLS 6J60AB R6J60AB JTD 6J60AB R6J60AB 60 #-#4 AWG CU AL /6 DIA BY /8 JTD_ID 6J60AB R6J60AB LPJ R6J00AB #/0-#4 AWG CU 00 R6J00AB #/0-# AWG AL /8 DIA BY 4 5/8 6J00ABFBD 50 kcmil J00ABFBD #6 AWG CU AL 5/8 DIA BY 5 /4 () 50 kcmil - 6J400ABFBD SAME #6 AWG CU AL 400 Phenolic 6J400ABFBD () 600 kcmil - /8 DIA BY 7 /8 # AWG CU AL 6J600ABFBD () 500 kcmil J600ABFBD #4 AWG CU AL 5/8 DIA BY 8 Contact Factory for Stud Options - see pages 0- for dimensional information Fuse Mounting hardware supplied with fuse holder. See page 7 for available covers

25 M Fuse Holders Volt Fuse Holders Have Been Tested & Approved for 00,000 Amp Withstand Rating Clip, Copper Alloy, Tin Plated Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6M0ASQ AX-, A5Z-, 6M0ASQ #0-# AWG CU A60Q-, A6Y-B, 6M0ASQ AGU, ATM, 6M0ASPQ ATQ, BAF, 6M0ASPQ #0-#4 AWG CU BAN, BLF, / DIA BY 6M0ASPQ BLN, BLS, N/A 0 Thermoplastic / 6M0AB FLA, FLM, 6M0AB FLQ, FNM, 6M0AB FNQ, GFN, #6-#4 AWG CU 6M0ABCU GGO, KLK, 6M0ABCU KLKD, KLQ, 6M0ABCU KTK, OTM, TRM See page 0 for dimensional information See page 7 for available covers See page 9 for DIN Rail Adapter 4

26 Midget Enclosed Fuse Holders Volt Has Been Tested & Approved for 00,000 Amp Withstand Rating Touchsafe Design IEC Type IP0 DIN Rail Mount (5mm) Blown Fuse Indication Available Handle Allows Quick Easy Fuse Change AC & DC Rated Indication light AC and DC - 80 volts minimum UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Fuse Holders Catalog# Indicating Poles Amp Base Material Wire Range Fuse Size Fuses 6SM0A AX-, A5Z-, A60Q-, 6SM0A A6Y-B, AGU, ATM, No 6SM0A ATQ, BAF, BAN, 6SM0A4 4 BLF, BLN, BLS, 0 Thermoplastic #6 - #4 AWG CU / DIA BY / 6SM0Al FLA, FLM, FLQ, 6SM0Al FNM, FNQ, GFN, Yes 6SM0Al GGO, KLK, KLKD, 6SM0A4l 4 KLQ, KTK, OTM, TRM Dimensions mm Inches A B C 5..0 D E F G H Pin kit (used for ganging multiple poles) Catalog Description EFH-MCCK - includes 0 handle pins and 0 body clips *use one handle pin and two body clips per pole 5

27 Midget Fuse Holders Volt Fuse Holders 0 Amp Sectional Version 600 Volts Approved for 0,000 Amp Withstand Rating Base, White Nylon, 05 C Connector, Box Type, Accepts up to #0 AWG Wire, either Terminated or Non-Terminated Clip, Copper Alloy, Tin Plated UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Catalog# Description Std. Pack Wire Range Fuse Size Fuses 6W0AF Flat Mount AX-, A5Z-, A60Q-, 6W0AC Channel Mount 0 A6Y-B, AGN, ATM, 6WE-F End Piece-Flat ATQ, BAF, BAN, 6WE-C End Piece-Channel #0-#4 AWG / DIA BY BLF, BLN, BLS, MC Channel Clamp 5 CU Stranded / LONG FLA, FLM, FLQ, MPC-6 6 Foot Channel FNM, FNQ, GFN, MPC- Foot Channel - GGO, KLK, KLKD, /8 Diameter X GR- KLQ, KTK, OTM, TRM Long Nylon Rod Flat Mount L = (0.68 X N) C = (0.68 X N) N = No. of Poles Channel Dimensions LCH = L +.5 6

28 CC Fuse Holders Volt 0 Amp: Have Been Tested & Approved for 00,000 Amp Withstand Rating Clip, Copper Alloy, Tin Plated with Patented Reject Member Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Listed File No. IZLT.E5 CSA Certified File No. LR Amp: Have Been Tested & Approved for 00,000 Amp Interrupting Capacity Patented Cool-Clip Design Clip, Copper Alloy, Tin Plated Integral DIN Rail Mount Expander Block Available UL Listed File No. IZLT.E5, Class CD CSA Certified File No. LR455-9 Fuse Holders Catalog#: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses 6CC0ASQ 6CC0ASQ #0-# AWG CU 6CC0ASQ 6CC0ASPQ ATDR 6CC0ASPQ #0-#4 AWG CU ATMR 6CC0ASPQ / DIA BY ATQR N/A 0 6CC0AB / CCMR 6CC0AB Thermoplastic FRQ-R 6CC0AB KLDR #6-#4 AWG CU 6CC0ABCU KLKR 6CC0ABCU KTK-R 6CC0ABCU LP-CC R6CC60AB R6CC60AB SAME #-#4 AWG CU 0.70 DIA BY 60 R6CC60AB #-# AWG AL.85 R6CC60AEB EXPANDER See page 0 for dimensional information See page 7 for available covers See page 9 for DIN Rail Adapter 7

29 Class CC Enclosed Fuse Holders Volt Fuse Holders Have Been Tested & Approved for 00,000 Amp Withstand Rating Touchsafe Design IEC Type IP0 DIN Rail Mount (5mm) Blown Fuse Indication Available Handle Allows Quick Easy Fuse Change Indication light AC and DC - 80 volts minimum UL Listed File No. IZLT.E5 CSA Certified File No. LR455 Base Wire Fuse Catalog # Indicating Poles Amp Materials Range Size Fuses 6SC0A ATDR 6SC0A ATMR NO 6SC0A ATQR 6SC0A4 4 / DIA BY CCMR 0 Thermoplastic #6-#4 AWG CU 6SC0Al / FRQ-R 6SC0Al KLDR YES 6SC0Al KLKR 6SC0A4l 4 KTK-R, LP-CC Dimensions mm inches A B C 5..0 D E F G H Pin kit (used for ganging multiple poles) Catalog Description EFH-MCCK - includes 0 handle pins and 0 body clips *use one handle pin and two body clips per pole 8

30 Class G Fuse Holders Have Been Tested & Approved for 00,000 Amp Withstand Rating Clip, Copper Alloy, Tin Plated with Patented Reject Member Quick Connect Standard with Screw (S) or Sems Pressure (SP) UL Listed File No. IZLT.E5 CSA Certified File No. LR455 / - 5 Amps (600 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G5ASQ RG5ASQ G5ASQ RG5ASQ #0-# AWG CU G5ASQ RG5ASQ G5ASPQ RG5ASPQ G5ASPQ RG5ASPQ #0-#4 AWG CU AG G5ASPQ RG5ASPQ / DIA BY 5 Thermoplastic SC G5AB RG5AB 5/6 SLC G5AB RG5AB G5AB RG5AB G5ABCU RG5ABCU #6-#4 AWG CU G5ABCU RG5ABCU G5ABCU RG5ABCU 0 Amps (600 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G0ASQ RG0ASQ G0ASQ RG0ASQ #0-# AWG CU G0ASQ RG0ASQ G0ASPQ RG0ASPQ G0ASPQ RG0ASPQ #0-#4 AWG CU AG G0ASPQ RG0ASPQ / DIA BY 0 Thermoplastic SC G0AB RG0AB / SLC G0AB RG0AB G0AB RG0AB G0ABCU RG0ABCU #6-4 AWG CU G0ABCU RG0ABCU G0ABCU RG0ABCU 5-0 Amps (480 Volt) Catalog #: Base Wire Fuse Std. Reinforced Poles Amp Materials Range Size Fuses G0ASQ RG0ASQ G0ASQ RG0ASQ #0-# AWG CU G0ASQ RG0ASQ G0ASPQ RG0ASPQ G0ASPQ RG0ASPQ #0-#4 AWG CU AG G0ASPQ RG0ASPQ / DIA BY 0 Thermoplastic SLC G0AB RG0AB 5/8 SC G0AB RG0AB G0AB RG0AB G0ABCU RG0ABCU #6-#4 AWG CU G0ABCU RG0ABCU G0ABCU RG0ABCU See page 0 for dimensional information See page 9 for DIN Rail Adapter 9 Fuse Holders

31 Class J, G, M, CC Fuse Holder Dimensions Fuse Holders Figure A B C D E F G H I J K L M EXPANDER POLE.6 6J0A. X.79 R6J0A POLE FIG SLOT POLE.5 N/A N/A N/A N/A 0.4 YES 6J60A POLE R6J60A POLE FIG POLE R6J00A POLE FIG 6 POLE 6J00A POLE POLE FIG 6M0A 6CC0A POLE 0.85 G5A POLE FIG G0A POLE.5 G0A POLE. R6CC60A POLE FIG POLE. 6J400A POLE FIG 4 POLE 6J600A POLE FIG 5 POLE MM = Dim X X.59 SLOT.8 X.74 SLOT N/A N/A N/A N/A 0.09 NO N/A N/A N/A N/A 0.09 YES EXPANDER Pole Pole Pole Figure : 0

32 Class J Fuse Holder Dimensions /6 HEX DRIVE φ φ φ.4 THRU [ 8.6] CB.75 X.40 DP [.9.0 X 0.] 4X φ 5/6 HEX DRIVE /4-0 STUD TYP Fuse Holders Pole Pole Figure : Pole Pole Pole Figure :.4 THRU [8.6] CB.75 X.44 DP [9. X.] 4X TYP. 5/6 HEX DRIVE / HEX DRIVE TYP TYP. /8-6 STUD TYP Pole Pole Figure 4:.6 5.9

33 Class J Fuse Holder Dimensions Fuse Holders TYP. /8 HEX DRIVE TYP..4 THRU [8.6] CB.75 X.44 DP [9. X.] 4X TYP TYP. /- STUDS TYP Pole Pole Figure 5: φ φ.8 [7.] THRU CB.5 [.5] TYP. SLOT.5 X.8 [.5X7.] CB.06 X.5 [6.9X.5] REF. Integral dovetail features for multi-line stackup. (For -Pole thermoplastic block only.) Figure 6:

34 Semi Conductor Fuse Holders Box Version - Insulator Base, General Purpose Phenolic, 50 C Hex-Head Bolts and Belleville Washers Provided Unassembled Connector-Aluminum, Tin Plated MS0 has dove-tail interlocking feature Two-piece modular design Have been tested and approved for 00,000 Amp, 600 Volt Withstand Rating UL Recognized File No. IZLT.E5 Fuse Holders Catalog#: Maximum Amperage: Wire Range: Tested At: I t Ip MS0 00 #/0 - #4 9 ka 7.4 ka MS0 400 () 50 kcmil - #6 480 ka 69.5 ka MS0 400 () 50 kcmil - #6 480 ka 69.5 ka MS () 500 kcmil - #6 840 ka 50.8 ka Note: Order two blocks per fuse.. [54.] /6 HEX. [79.].56 [4.].75 [9.].47 [.0].88 [.].75.5 [57.5] /8-6 [44.5].40 [60.96].7 [6.9] /4-0 MS0 MS0. [79.].56 [4.] 4.00 [0.6].75 [9.].5 [57.5] [7.9] [7.0] /4-0 / [60.96].8 [8.9] MS0 MS04

35 Semi Conductor Fuse Holders -,000 Volt Fuse Holders Stud Version - Base, General Purpose Phenolic, 50 C Stud, Steel Zinc Plated Nuts and Washers Provided Unassembled Have been tested and approved for 00,000 Amp, 600 Volt Withstand Rating UL Recognized File No. IZLT.E5 Catalog#: Maximum Amperage: Wire Range: ST 4 00 DIA 0 ka 7.6 ka ST DIA 0 ka 40. ka Approved for,000 volts - not interrupt tested Tested At: I t Ip ST 4 ST 8 Note: Order two blocks per fuse. 4

36 Fuse Holders with BD (Box Distribution) Connectors 0 and 60 Amp 50 and 600 Volt Fuse Holders Available on Class H, R, and J Holders Connectors, High Conductive Aluminum, Tin Plated Reinforcing Member Available, Standard on Class R UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Class H Fuse Holders (For Class R, Replace F with R in Catalog Number) Catalog #: Volts Amp Line Wire Range Load Wire Range F60AXBD F60AXBD-D () #-#0 AWG () #-#0 AWG () #6-#4 AWG 6F0AXBD-D 0 () #6-#4 AWG 6F60AXBD () #-#0 AWG 6F60AXBD-D () #6-#4 AWG () #0-#8 AWG () #-#0 AWG () #6-#4 AWG () #-#0 AWG () #6-#4 AWG Class J Fuse Holders Catalog #: Volts Amp Line Wire Range Load Wire Range 6J60AXBD 6J60AXBD-D () #-#0 AWG () #-#0 AWG () #6-#4 AWG () #-#0 AWG () #6-#4 AWG X - Denotes Number of Poles (,, or ) Class R and J - No Agency 5

37 STSF Forklift/Semi Conductor Fuse Holder Fuse Holders Base, High Strength Thermoplastic Temperature Rating of 70 C Studs, Stainless Steel (Nuts and Washers Provided) 0 Volt AC/DC, to 400 Amps UL Recognized File No. IZLT.E5 Applications: This holder is found in direct current (DC) applications: forklifts, golf carts, custom high-end car stereo systems, heavy equipment, marine aircraft, etc. STSF: A #0 flat or conventional pan head screw head is acceptable. 6

38 Fuse Holder Covers Material, Thermoplastic Thermal Rating, 5 C (RTI, per UL 746) Flammability, VO (per UL 94) UL Listed Accessories Under File No. JDVS.E885 In Application, Protection is Consistent With IEC Standard 59, Designation IP0 (finger safe)* - except CJ600-, CJ600- and CJ600- Opening Allows View of Self-Indicating Fuses Holes for Test Probes and Re-tightening of Wire Terminations Covers Fit Most Fuse Holder Brands Fuse Holders Catalog#: For Use W/Fuse Holder#: Fuse Type: Voltage: Amp: CHR0 F0A/R0A H/R 50 0 CHR60 F60A/R60A H/R CHR00 RF00A/R00A H/R CHR60 6F0A/6R0A H/R CHR660 6F60A/6R60A H/R CHR600 R6F00A/6R00A H/R CJ60 6J0A J CJ660 6J60A J CC60 6CC0A CC CC660 R6CC60A CD CCM60** 6M0A/6CCM0A MISC CJ600 - XC (, or ) 6J00A J See page 8 for dimensional information. * Applications involving fuse holders other than Marathon may not provide IP0 finger protection. ** Covers are recognized if used with recognized fuses. Cover/Puller (CVR-MCC) Marathon s Cover/Puller was designed for use with the Class CC (0 Amp), Midget and Class G (5 & 0 amp only) fuse holders. Once installed, the Cover/Puller provides an easy and safe way to remove fuses. In application, protection is consistent with IEC Standard 59, designation IP0 (finger safe). 7

39 Fuse Holder Covers Fuse Holders Catalog Name Figure A B C D E F CHR0 FIG CHR60 FIG CHR00 FIG CHR60 FIG CHR660 FIG CHR600 FIG CJ60 FIG CJ660 FIG CC60 FIG CC660 FIG CCM60 FIG CJ600-C FIG ( mounting screws supplied) CJ600-C FIG ( mounting screws supplied) CJ600-C FIG (4 mounting screws supplied) MM = Dim X 5.4 Figure : Figure : "A" "B".8 REF. 7.. TYP Figure : Figure 4: 8

40 DIN Rail Adapter Accessory to Secure Surface Mount Devices on DIN Rail: DIN Adapter is Made of Acetal Resin Material High Mechanical Strength and Rigidity Good Resilience and Resistance to Creep Excellent Dimensional Stability Excellent Low Temperature Toughness Wide End-Use Temperature Range Fuse Holders Assembly Method: Press Adapter onto Rail, Fasten Component with #8 Self Tapping Screw (Screw Not Supplied) Assembly Locks Firmly onto DIN Rail The Adapter will work with Class H 50 Volt 0 Amp, Class R 50 Volt 0 Amp Holders, 500 Series, 600 Series, 700 Series Consult Factory for Others USE A #8 SELF TAPPING SCREW FOR MOUNTING COMPONENT Catalog Standard Number Package DIN R- 0 Class CC, G and M Fuse Holder Accessories DIN Rail Adapter (Catalog# DIN R-) This adapter is for use with the Class CC (0 Amp), Midget and Class G fuse holders. The DIN R- snaps securely to the Marathon fuse holders and to DIN rails without tools. This permits the holders to mount directly to standard and low profile 5mm symmetrical and mm asymmetrical DIN rails. They may be removed from rails by lifting the disconnect tab. 9

41 Power Distribution Blocks with Short- Circuit Current Ratings General Information: The requirements of the 005 National Electric Code (NEC) and UL508A now require many electrical panels to carry a Short Circuit Current Rating (SCCR). Analyzing the SCCR of individual components and overcurrent protection devices is a method of determining the SCCR of an electrical assembly. Equipment with low SCCRs are limited to locations where only low-level short-circuit current is available. By replacing a low-rated power distribution block with a Marathon high SCCR power distribution block, an assembly can achieve a higher SCCR for more installation flexibility. SCCR Marathon s Power Distribution Blocks are standard products that have been used in electrical control panels for over 5 years. These blocks have now been tested and approved for higher SCCR. The higher ratings are based on proper wire sizes and the appropriate circuit protection device (fuses or circuit breakers). UL508A does allow default SCCR for Power Distribution Blocks of 0,000A with no additional testing. Marathon s Power Distribution Blocks (UL File # E6806) are recognized under UL Standard 059 and have been investigated by UL for Short Circuit Current Rating under category XCFR; Terminal Blocks-Component. In addition, Marathon offers Power Distribution Blocks that are listed to UL 95. The feeder spacing requirements of UL508A are achieved with these blocks. For detailed SCCR product information, please visit 40

42 UL Listed Power Distribution Blocks The requirements of the 005 National Electric Code (NEC) and UL508A now require many electrical panels to carry a Short Circuit Current Rating (SCCR). These new Power Distribution Blocks are listed to UL95. The feeder spacing requirements of UL508A are achieved with these blocks. Connector Housings, Thermoplastic, UL 94 V-0, RTI 5 C Insulator Base Plate, Phenolic Laminate, UL 94 V-0, RTI 0 C Wire Connectors - Tin Plated Aluminum, Rated for Copper or Aluminum wire (CU & AL) Short Circuit Current Rating up to 00kA (00kA SCCR Rating with copper conductors only. Requires specific over-current protection device.) Short Circuit Ratings (Copper Wire Only) Attached hinge cover UL 508A Feeder Circuit Terminal Spacing for up to 600 Volts Rated up to 5 Amp, 600 Volts Line side conductor up to 600 kcmil Distribution, up to twelve conductors per pole Investigated to UL 95 UL Category and File: QPQS.E0940 Suitable Conductors Overcurrent Protection Fuse kcmil/awg CU Required Class/Max Amp Rating SCCR RMS Volts Catalog # Line Load J T RK RK5 G CG Sym A Max FPB570 CH / , FPB57 CH /0-6 / , FPB574 CH /0-6 / , FPB580 CH / , FPB55 CH / / , FPB588 CH /0 / / , FPB595 CH / / , Listed Power Blocks TORQUE RATINGS Line Load Wire Range AWG/kcmil Current Amps Wire Range Torque Wire Range Torque Catalog # Line Load CU AL AWG/kcmil in. lb. AWG/kcmil in. lb. /0-6 0 FPB570 CH /0-4 (4) /0-6 0 FPB57 CH /0-4 / /0-6 0 FPB574 CH /0-4 /4-0 stud /4-0 stud /0-6 0 FPB580 CH /0-4 (6) FPB55 CH (6) FPB588 CH /0-0 () / (6) FPB595 CH () See page 4 for dimensional information 4

43 Listed Power Blocks FPBXXX PRODUCT & SCCR INFORMATION PROVIDED ON SIDES OF BLOCK Listed Power Blocks CB Φ. [5.6] THRU Φ.50 X.8 DP 4X [.7 X 9.7 DP] w/ Cover w/o Cover FPBXXX PRODUCT & SCCR INFORMATION PROVIDED ON SIDES OF BLOCK Φ. [5.6] THRU CB Φ.50 X.8 DP 4X [.7 X 9.7 DP] w/ Cover w/o Cover 4

44 Power Terminal Blocks General Information: Barrier Style Power Terminal Blocks are available in eight sizes. They are identified by the first three digits of the catalog number. The 40, 4, 4, 44 and 45 series are manufactured with general purpose phenolic rated at 50 C. The 4, and series are manufactured with high impact thermoplastic rated at 5 C. Enclosed touch proof power terminal blocks (EPB series) are available in two sizes. All Power Terminal Blocks are UL recognized file number XCFR.E6806 and CSA certified file number LR9766, unless noted. Connector Wire Hole Size: Conductor Opening Diameter of Opening # # # * #/ * 50kcmil * 50kcmil kcmil * 500kcmil kcmil * Enclosed blocks have larger openings (see page 5) Power Blocks Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: Designed for use with heating, air conditioning and refrigeration, elevator systems, material handling equipment, control panels, motor control, switchgear, and any area where power needs to be distributed to more than one load. 4

45 Power Distribution Blocks Power Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Amp Rating Based on NEC Table 0-6 Using 75 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit ** Openings rated for #4-4 AWG are multiple wire rated: () #0 CU Str, ( to 4) # CU Str, and ( to 4) #4 CU Str. *** Openings rated for #-4 AWG are multiple wire rated: () #8 CU Str, () #0 CU Str, () # CU Str, and () #4 CU Str Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole CH CH CH CH CH CH CH CH CH CH CH CH 4 4 Adder Adder Thermoplastic Thermoplastic Thermoplastic Phenolic Thermoplastic Phenolic Phenolic Phenolic Thermoplastic Phenolic Phenolic Phenolic Phenolic Thermoplastic CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information 44 #-#4 AWG #-#4 AWG /0-#4 AWG /0-#4 AWG /0-#4 AWG /0-#4 AWG /0-#4 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 400 kcmil - #6 AWG 400 kcmil - #6 AWG 400 kcmil - #6 AWG 400 kcmil - #6 AWG 400 kcmil - #6 AWG #0-#8 AWG #0-#6 AWG ** #4-#4 AWG ** #4-#4 AWG ** #4-#4 AWG ** #4-#4 AWG ** #4-#4 AWG #4-#4 AWG #/0-#4 AWG #-#4 AWG #-#4 AWG #-#4 AWG #-#4 AWG *** #-#4 AWG

46 Power Distribution Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Amp Rating Based on NEC Table 0-6 Using 75 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit Phenolic Thermoplastic Phenolic Phenolic Thermoplastic Phenolic Phenolic Phenolic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic Thermoplastic 45 ** Openings rated for #4-4 AWG are multiple wire rated: () #0 CU Str, ( to 4) # CU Str, and ( to 4) #4 CU Str. *** Openings rated for #-4 AWG are multiple wire rated: () #8 CU Str, () #0 CU Str, () # CU Str, And () #4 CU Str Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information #/0-#4 AWG #/0-#4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 600 kcmil - # AWG 600 kcmil - # AWG 600 kcmil - # AWG 600 kcmil - # AWG 600 kcmil - # AWG 50 kcmil - #/0 AWG 50 kcmil - #/0 AWG ** #4-#4 AWG ** #4-#4 AWG #-#4 AWG #/0-#4 AWG ***#-#4 AWG 50 kcmil - #6 AWG ***#-#4 AWG 50 kcmil - #6 AWG #-#4 AWG #-#4 AWG *** #-4 AWG #/0 - #4 AWG ** #4-#4 AWG *** #-#4 AWG /0-#4 AWG 50 kcmil - #/0 AWG ** #4-#4 AWG *** #-#4 AWG Power Blocks

47 Power Distribution Blocks (Cont.) Power Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated - Rated for Copper and Aluminum Wire CU Connector, High Conductive Copper, Tin Plated, Rated for Copper Wire Only Amp Rating Based on NEC Table 0-6 Using 75 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit Adder Thermoplastic Phenolic Phenolic Phenolic Phenolic Thermoplastic Phenolic Phenolic Phenolic Thermoplastic Thermoplastic Phenolic Phenolic Phenolic ** Openings rated for #4-4 AWG are multiple wire rated: () #0 CU Str, ( to 4) # CU Str, and ( to 4) #4 CU Str. *** Openings rated for #-4 AWG are multiple wire rated: () #8 CU Str, () #0 CU Str, () # CU Str, And () #4 CU Str Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole CH CH CH CH CH CH CH CH CH CH CH CH CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information CU CU CU CU CU CU CU CU 50 kcmil - #/0 AWG 500 kcmil - #4 AWG 50 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 600 kcmil - # AWG /0 - #4 AWG /0 - #4 AWG /0 - #4 AWG 500 kcmil - #4 AWG /0 - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 500 kcmil - #4 AWG 6 /0 -#4 AWG /0 -#4 AWG ** #4 - #4 AWG /0 -#4 AWG /0 - #6 AWG ** #4 - #4 AWG ** #4- #4 AWG ** #4- #4 AWG ** #4- #4 AWG #-#4 AWG ** #4 -#4 AWG *** # -#4 AWG # -#4 AWG /0-#4 AWG /0-#4 AWG

48 Power Splicer Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Amp Rating Based on NEC Table 0-6 Using 75 C and 90 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole CH CH CH CH CH CH CH CH CH CH CH CH CH CH CH 4 Adder Thermoplastic Phenolic Thermoplastic Phenolic Phenolic Phenolic Phenolic Phenolic Thermoplastic Thermoplastic Phenolic Thermoplastic Thermoplastic Phenolic CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information # - #4 AWG # - #4 AWG #/0 - #4 AWG #/0 - #4 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG #/0 -#4 AWG 600 kcmil - #4 AWG 600 kcmil - # AWG 50 kcmil - #/0 AWG 50 kcmil - #4 AWG # - #4 AWG # - #4 AWG #/0 - #4 AWG #/0 - #4 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG 50 kcmil - #6 AWG #/0 -#4 AWG 600 kcmil - #4 AWG 600 kcmil - # AWG 50 kcmil - #/0 AWG 50 kcmil - #4 AWG Power Blocks 47

49 Power Splicer Blocks (Cont.) 600 Volts Connector, High Conductive Aluminum, Tin Plated, Rated for Copper and Aluminum Wire CU Connector, High Conductive Copper, Tin Plated, Rated for Copper Wire Only Amp Rating Based on NEC Table 0-6 Using 75 C and 90 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit Power Blocks Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole CH CH CH Adder Phenolic Thermoplastic Phenolic Phenolic CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information CU CU CU 500 kcmil - #4 AWG #/0 -#4 AWG #/0 -#4 AWG 50 kcmil - #6 AWG 500 kcmil - #4 AWG #/0 -#4 AWG #/0 -#4 AWG 50 kcmil - #6 AWG 48

50 Power Stud Blocks 600 Volts Connector, High Conductive Copper, Tin Plated Stud, Brass, Tin Plated, Metric (M) Studs, Steel Suitable for Compression Wire Lugs UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole 0 Adder CH CH 00 Thermoplastic /4-0 X 9/6 /4-0 X 9/6 CH 04 Adder 4 CH 4 CH 00 Thermoplastic M6 x 5 M6 x 5 4 CH Phenolic /4-0 Screw /4-0 Screw Phenolic /4-0 X 9/6 /4-0 X 9/ Phenolic /8-6 X /6 /8-6 X / Phenolic /8-6 X /6 /4-0 X / Phenolic /8-6 X 7/6 /4-0 X 9/ Phenolic /8-6 X 7/6 /8-6 X 7/ Phenolic /8-6 X 7/6 /8-6 X 7/ Phenolic /8-6 X 7/6 /4-0 X 7/ CH 56 CH 0 Thermoplastic /8-6 X /6 /8-6 X /6 56 CH 564 CH 564 CH 0 Thermoplastic M0 x 0 M0 x CH Phenolic /- x 7/6 /- x 7/ Phenolic /8-6 X /8-6 X 4464 CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information 49 Power Blocks

51 Power Splicer/Stud Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Stud, Brass, Tin Plated Quick Connect, Brass, Tin Plated 0- Screw, Brass, Nickel Plated Amp Rating Based on NEC Table 0-6 Using 75 C Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 (does not apply to 4X559) For detailed SCCR information, please visit Power Blocks Connector Line Openings Connector Load Openings Catalog# Poles Amps Material Configuration Wire Range Per Pole Configuration Wire Range Per Pole Thermoplastic #-#4AWG 0- Screw Thermoplastic #-#4AWG 0- Tapped Hole Thermoplastic #-#4AWG.5X.0 QC Thermoplastic #-#4AWG 0- X.60 Stud Thermoplastic #-#4AWG #0- Hole & () QC Thermoplastic #-#4AWG #-#4AWG & () QC Phenolic 50kcmil-#6AWG /8-6 X /8 Stud Phenolic /0-#4AWG M6 Hole Phenolic /0-#4AWG /4-0 Tapped Hole 455 See pages for dimensional information (See page 54 for available covers) 50

52 Power Splicer/Stud Blocks 600 Volts Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Stud, Brass, Tin Plated, Metric (M) Studs, Steel; intended for wires terminated with crimp lugs Amp Rating Based on NEC Table 0-6 Using 75 C, Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 (does not apply to X559 and X558) For detailed SCCR information, please visit ** Openings rated for #4-4 AWG are multiple wire rated: () #0 CU Str, ( to 4) # CU Str, and ( to 4) #4 CU Str. *** Openings rated for #-4 AWG are multiple wire rated: () #8 CU Str, () #0 CU Str, () # CU Str, and () #4 CU Str Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole 0574 Adder 574 CH 574 CH 75 Thermoplastic #/0 - #4 AWG /4-0 X / 574 CH 0474 Adder 474 CH 474 CH 75 Thermoplastic #/0 - #4 AWG M6 x 474 CH Phenolic #/0 - #4 AWG /4-0 X / Phenolic #/0 - #4 AWG /4-0 X / CH 559 CH 0 Thermoplastic 50 kcmil - #6 AWG /8-6 X /4 559 CH 558 CH 558 CH 0 Thermoplastic 50 kcmil - #6 AWG M0 X CH Phenolic 500 kcmil - #4AWG /4-0 X / Phenolic 500 kcmil - #4AWG /8-6 X 5/ Phenolic 000 kcmil kcmil /8-6 X / Phenolic 500 kcmil - #4AWG /8-6 X 5/ Phenolic 500 kcmil - #4AWG /- X 5/ Power Blocks CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information 5

53 Power Stud to Distribution Blocks Connector, High Conductive Aluminum, Tin Plated Rated for Copper and Aluminum Wire Stud, Brass, Tin Plated, Metric (M) Studs, Steel; intended for wires terminated with crimp lugs Amp Rating Based on NEC Table 0-6 Using 75 C, Copper Wire UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 For detailed SCCR information, please visit ** Openings rated for #4-4 AWG are multiple wire rated: () #0 CU Str, ( to 4) # CU Str, and ( to 4) #4 CU Str. Power Blocks *** Openings rated for #-4 AWG are multiple wire rated: () #8 CU Str, () #0 CU Str, () # CU Str, And () #4 CU Str Stud to Distribution Blocks Catalog # Hinge Connector Line Wire Openings Connector Load Wire Openings Cover Poles Amps Material Configuration Range Per Pole Configuration Range Per Pole 7 CH 7 CH 50 Thermoplastic /8-6 x /6 ** #4 - #4 AWG 7 CH 7 CH 7 CH 50 Thermoplastic M0 x 0 ** #4 - #4 AWG 7 CH 80 CH 80 CH 50 Thermoplastic /8-6 x /6 *** # - #4 AWG 8 80 CH 8 CH 8 CH 50 Thermoplastic M0 x 0 *** # - #4 AWG 8 8 CH 70 CH 70 CH 50 Thermoplastic /8-6 x /6 *** #/0 - #4 AWG 4 70 CH 7 CH 7 CH 50 Thermoplastic M0 x 0 ***#/0 - #4 AWG 4 7 CH CH = Available with hinge cover attached (See page 54 for available covers) See pages for dimensional information 5

54 New EPB Series Enclosed Power Block Electrical 600 Volts (UL 059 Group B and C) Up to 50 Amps 690 Volts (IEC) Wire range #/0 to 400 kcmil *Multiple Wire Ratings: Copper Strand Wire Only # opening: () #6 AWG () #8 AWG ( to 4) #0 AWG ( to 4) # AWG ( to 4) #4 AWG #/0 opening: () #4 AWG () #6 AWG () #8 AWG () #0 AWG () # AWG () #4 AWG Mechanical Base, Gray Thermoplastic, 5 O C (UL RTI) Flammability, UL 94 V-0 Mounting: DIN mount option (panel mount also) Standards UL Recognized File No. XCFR.E6806 (UL 059) CSA Certified File No. LR9766 (CSA C. No. 58) CE (Component IEC ) IEC 59, IP-0 Connector Wire Hole Size Conductor Diameter Opening of Opening # #4 AWG.8" #/0 #4 AWG.50" 50 kcmil #6 AWG.7" 400 kcmil #6 AWG.94" Accessories (consult factory) White Markers to Identify Circuits Black Thermoplastic Safety Plugs Feed Spacing UL508A Adapter Plate SCCR, RMS Amperage Line Line Load Load SYM Amps CU Wire Connector Wire Openings Connector Wire Openings Catalog # 600 Volt Max 75 O C Configuration Range Per Pole Configuration Range Per Pole Power Blocks EPBXD4 00, /0 - #4 AWG /0 - #4 AWG mm mm EPBXD44 00, /0 - #4 AWG # - #4 AWG mm mm 4 EPBXD7 0,000 EPBXP7 50,000-00, kcmil - #6 AWG 0-6 mm 50 kcmil - #6 AWG 0-6 mm EPBXD74 0,000 EPBXP74 00, kcmil - #6 AWG 85-6 mm /0 - #4 AWG mm # - #4 AWG mm Note: ) The ampacities are based on Table 0-6 of the NEC. ) The connectors were tested and approved at 90 O C per UL 486 A/B. ) See for detailed SCCR information. See page 59 for dimensional information Catalog Description: EPB A D 4 Connector Material A Aluminum D Mount on 5 mm 4 () #/0 to () #/0 rated copper or DIN rail or 44 () #/0 to (4) # aluminum wire flat panel 7 () #50 to () #50 C Copper rated P Flat panel 74 () #400 & () #/0 to (8) # copper wire only (for 7 and 74) 5

55 Power Block Covers Material UL Recognized, QMFZ, 5 C,.06 Clear Protective Plastic Two Thread Cutting Screws Furnished Per Cover Covers Are Slotted For Easy Installation Covers Are Available For The 40, 4, 4, 4, 44, 45 and Series Power Blocks: Snap On, Hinged Cover, Thermoplastic, UL Recognized, QMFZ, 5 C Dimensions (IN): Power Blocks Catalog # A B Figure # CC CC CC CC CC CC CC CC CC CC CC4..8 CC CC CC CC CC CC CC CH CH - - CH CH CH - - CH A Figure B Figure Figure (Hinged Cover) 54

56 Grounding Lugs Connector, High Conductive Aluminum, Tin Plated Per Code Screw Is Green UL Recognized File No. ZMVV.E4665 CSA Certified File No Catalog # (Connector Wire Range) Power Blocks GL0 (#-#4 AWG) GL0 (#/0-#4 AWG) 9780 Part # Wire Range Torque AWG / kcmil Lb in - 50 GL /0-6 0 GL GL GL5 (50MCM-#6 AWG)

57 Series Power Terminal Block Dimensions Power Blocks CH Series (MTG. SLOTS) Adder POLE POLE POLE TYP SLOT.49 X. THRU [. X 5.5] TYP (W/O COVER) (WITH COVER).85.6 Series POLE POLE POLE POLE POLE POLE 56

58 Power Terminal Block Dimensions CH Series SLOT. X.7 THRU CB.44 X.94 X.9 DP TYP (MTG. SLOTS) TYP TYP (MTG SLOTS) (W/O COVER) (WITH COVER) Series POLE POLE POLE Power Blocks 4 Series POLE POLE POLE POLE POLE 4 POLE 57

59 4 Series Power Terminal Block Dimensions Power Blocks 4 Series POLE POLE POLE POLE POLE POLE 44 Series.9 [58.] 4.7 [05.9] 6.05 [5.6].0/[5.] DIA. THRU.4/[0.] C'BORE x.8/[4.6] DP [0.6] 4. [04.8].88 [47.8].50 [8.].88 [47.8].88 [47.8]. [7.9].4 [9.0].05 [.8]. [8.].90 [7.7] POLE POLE POLE 58.5 [.]

60 Power Terminal Block Dimensions 45 Series POLE POLE POLE EPBXD4 & EPBXD44 STACK UP DIMENSIONS (IF DOVETAIL IS USED FOR MULTI-LINE) Power Blocks SLOT.50 X.5 [.70 X 6.5] [95.58] TYP. FOR SNAP-IN MARKER CARDS EPBXX7 & EPBXX [.49] TYP STACK UP DIMENSIONS (IF DOVETAIL IS USED FOR MULTI-LINE PB) SLOT.5 X.7 [. X 6.86] [4.54].75 [95.5] 4.9 [.44] TYP. FOR SNAP-IN MARKER CARDS. [8.8]

61 Heavy Duty Terminal Blocks General Information: Heavy Duty Terminal Blocks are available in two styles Deadfront Type (00, 00, 985 and 0987 series) and Barrier Type (500, 600 series and 700 series [Thermoplastic]). Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface, and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Heavy Duty Terminal Blocks Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: These rugged terminal blocks are widely used in such industries as traffic control, utilities, switchgear and other utility related equipment. 60

62 Heavy Duty Terminal Blocks 00 Series - Deadfront Type 600 Volts Base, General Purpose Phenolic, 50 C Connector, Aluminum Tin Plated Spring, Copper, Use XXS Screws, Brass, Tin Plated Wire Range #6-#8 AWG CU 65 Amps Wire Range With Spring #6-#4 AWG CU 65 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog# Catalog# # of Poles A B 0 0S S S S S S S=Copper Pressure Spring MM = Dim X 5.4 Heavy Duty Terminal Blocks 6

63 Heavy Duty Terminal Blocks 0P and 00 Series - Deadfront Type 600 Volts Base, General Purpose Phenolic, 50 C Connector, Aluminum, Tin Plated Screws, Steel, Tin Plated 0P Wire Range #4-#4 AWG CU 70 Amps 00 Wire Range #4-#8 AWG CU 70 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog# # of Poles A B MM = Dim X 5.4 Heavy Duty Terminal Blocks.50 [8.].9 [4.8].50 [.7] "A" "B".75 [9.].50 [.7].66 [6.7].8 [0.7]. [8.6] 0P Series 00 Series 6

64 Heavy Duty Terminal Blocks 0987 RZ Series - Deadfront Type 600 Volts 50 Amps Base, Thermoplastic, 5 C, Flammability - UL 94 V-O Connector, Copper Alloy, Nickel Plated (TC Tubular Clamp) Wire Range () #8-#4 sol/str () str () 4 str () str and () 4 str.475 Centerline Spacing IP0 Touchproof Protection UL Recognized File No. XCFR.E478 CSA Certified File No. LR "A" "B" Dimensions Catalog # # of poles A B 0987 RZ TC N/A 0987 RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC RZ TC Heavy Duty Terminal Blocks.7 8. CB DEPTH SECTION A-A ø.5 THRU CB ø.7 TYP. [ø.8 THRU CB ø 6.9] A A.6 6

65 Heavy Duty Terminal Blocks 985 GP Series - Deadfront Type 600 Volts 85 Amps Heavy Duty Terminal Blocks Base, General Purpose Phenolic, 50 C Connector, Aluminum, Tin Plated Screws, Steel, Nickel Plated Wire Range #4-#8 AWG Copper Wire 85 Amps Multiple Wire Combinations For Solid Or Stranded Copper Wire Are: #6 AWG to #4 AWG to 6 #4 AWG #8 AWG to 6 #6 AWG to 4 #0 AWG to 8 #8 AWG to 4 # AWG.65 Center-Line Spacing UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 985 GP 0.6 N/A 985 GP GP GP GP GP GP GP GP GP GP MM = Dim X

66 Heavy Duty Terminal Blocks 500 Series 600 Volts 500 MCJ Multiple Circuit Jumper Base, General Purpose Phenolic, 50 C Connector, Brass, Nickel Plated Screws, Brass, Nickel Plated, 0- Rated 0 Amps with unprepared wire, #0-8 AWG Copper Rated 75 Amps when wired with crimp type ring, spade or fork terminal 5/8 Line To Line Spacing UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog #: # of Poles Catalog #: # of Poles 50 STD 50 ST 504 STD ST STD ST STD ST 8 5 STD 5 ST 50 DJ 50 SC 504 DJ SC DJ SC DJ SC 8 5 DJ 5 SC 50 DJSV 50 H 504 DJSV H DJSV H DJSV H 8 5 DJSV 5 H 500 STD 500 DJ 500 DJSV 500 ST* 500 SC 500 H Standard Removable Removable 0- Stud Short Circuiting Standard Connector Connector With Connector With Connector With Removable Bar With Brass With Hinge Cover Serrations for Brass Insert Brass Insert Connector Insert 4 Shorting Anti-rotation Removable Cover Pins Per Block Heavy Duty Terminal Blocks * STRC: 0- Stud with Riveted Connector Catalog #: # of Poles A B MM = Dim X 5.4 See page 9 for DIN Rail Adapter 65

67 Heavy Duty Terminal Blocks 600 Series 600 Volts Heavy Duty Terminal Blocks 600 MCJ Multiple Circuit Jumper Base, General Purpose Phenolic, 50 C Connector, Brass, Nickel Plated Screws, Brass, Nickel Plated, 0- Rated 0 Amps with unprepared wire, #0-8 AWG Copper Rated 75 Amps when wired with crimp type ring, spade or fork lugs / Line To Line Spacing UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog #: # of Poles Catalog #: # of Poles 60 STD 60 ST 604 STD ST STD ST STD ST 8 6 STD 6 ST 60 DJ 60 SC 604 DJ SC DJ SC DJ SC 8 6 DJ 6 SC 60 DJSV 60 H 604 DJSV H DJSV H DJSV H 8 6 DJSV 6 H 600 STD 600 DJ 600 DJSV 600 ST* 600 SC 600 H Standard Removable Removable 0- Stud Short Circuiting Standard Connector Connector With Connector With Connector With Removable Bar With Brass With Hinge Cover Serrations for Brass Insert Brass Insert Connector Insert 4 Shorting Anti-rotation Removable Cover Pins Per Block * STRC: 0- Stud with Riveted Connector Catalog #: # of Poles A B MM = Dim X 5.4 See page 9 for DIN Rail Adapter 66

68 Heavy Duty Terminal Blocks...Thermoplastic 700 Series 600 Volts Base, Thermoplastic, 5 C (UL RTI) Serrated Connectors, Brass, Nickel Plated Screws, Brass, Nickel Plated, 0- Rated 0 Amps with unprepared wire, #0-8 AWG Copper Rated 75 Amps when wired with crimp type ring, spade or fork lugs 5/8 (.65 ) Line To Line Spacing UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Standard Short Circuit Dimensions Clear # of Poles Terminal Terminal A B Cover 70 STD 70 SC CC STD 70 SC.6.6 CC STD 704 SC.5.89 CC STD 705 SC.88.5 CC STD 706 SC CC STD 707 SC CC STD 708 SC CC STD 709 SC CC STD 70 SC CC 70 7 STD 7 SC CC 7 7 STD 7 SC CC 7 STD = Standard Terminal - Connector Plate, Phil-Slot Screws, Center M/S SC = Short Circuit Terminal (Pin to be torqued to 5 in-lbs) CC = Cover - Clear PVC snap on cover, sized to fit and protect Heavy Duty Terminal Blocks See page 9 for DIN Rail Adapter 67

69 Single Row Terminal Blocks General Information: Single Row Terminal Blocks are available in four basic line to line molding sizes. Some are available in either open or feed thru/printed circuit designs. The basic material is phenolic. Modifications are also provided on most terminal blocks, including marking strips. Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 059. Ratings based on UL 059 may be higher in some cases depending on application. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Reference Chart: Single/Double Row Terminal Blocks Catalog Base Max Wire Screw Inches # of Series Page Amps Volts Material Size for Screw Size L to L Lines Features *00 Phenolic # Open Back 599/ Phenolic # Open Back 699/ Phenolic # Open Back 8/ Phenolic # Open Back Phenolic # Feed Thru Phenolic # Printed Circuit Phenolic #4 6-/ Printed Circuit All voltage ratings based on Class C requirements unless noted. Open back terminal blocks require an insulator strip to achieve voltage rating. *Based on Class B requirements. 68

70 Single Row Terminal Blocks Kulka 4 Series 00 Volts* Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-0F) Material Available Screws, #-56 Binder Head, Phil-Slot, Brass Terminals, Plated Brass - Poles /4 Centers Wire Range With Wire Binding Screw #8-#0 AWG 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Hardware Options: (Hardware options may affect ratings - consult factory) KT0 = Full Quick Connect (0 Flat) See Page 97 KT = Full Quick Connect (45 Bend) See Page 97 KT = Full Quick Connect (90 Bend) See Page 97 ST = Full Solder See Page 99 J 40 = Line to Line Jumper See Page 0 /4 ST = Half Solder See Page 99 KT6 = Half Quick Connect (0 Flat) See Page 97 KT7 = Half Quick Connect (45 Bend) See Page 97 KT8 = Half Quick Connect (90 Bend) See Page 97 Z = Lug Over the Side (.) Consult Factory Catalog Number Dimensions Description of Poles A B 4 GP 0 PSB GP 0 PSB GP 0 PSB GP 04 PSB GP 05 PSB GP 06 PSB GP 07 PSB GP 08 PSB GP 09 PSB GP 0 PSB GP PSB GP PSB GP PSB GP 4 PSB GP 5 PSB GP 6 PSB GP 7 PSB GP 8 PSB GP 9 PSB GP 0 PSB GP PSB GP PSB GP PSB MM=Dim X 5.4 *Based on Class B Requirements 9 = Printed Circuit Pin (.5) (Over the Side) Consult Factory 904 = Feed Thru Solder See Page 0 See pages 96- for terminal block accessories 69 Single/Double Row Terminal Blocks

71 Single Row Terminal Blocks Kulka 599/799 Series 50 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-0F) Material Available Screws, #5-40 Binder Head, Phil-Slot, Brass Terminals, Plated Brass -0 Poles /8 Centers Wire Range With Wire Binding Screw #6-# AWG 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 799 Series (Riveted KTs) See page 97 UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks Number Dimensions Catalog of Description Poles A B 599 GP 0 PSB GP 0 PSB GP 0 PSB GP 04 PSB GP 05 PSB GP 06 PSB GP 07 PSB GP 08 PSB GP 09 PSB GP 0 PSB GP PSB GP PSB GP PSB GP 4 PSB GP 5 PSB GP 6 PSB GP 7 PSB GP 8 PSB GP 9 PSB GP 0 PSB GP PSB GP PSB GP PSB GP 4 PSB GP 5 PSB GP 6 PSB GP 7 PSB GP 8 PSB GP 9 PSB GP 0 PSB MM=Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT8 = Full Quick Connect (0 Flat) See Page 97 KT9 = Full Quick Connect (45 Bend) See Page 97 KT0 = Full Quick Connect (90 Bend) See Page 97 J 600 = Line to Line Jumper See Page RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT4 = Half Quick Connect (0 Flat) See Page 97 KT5 = Half Quick Connect (45 Bend) See Page 97 KT6 = Half Quick Connect (90 Bend) See Page 97 Z = Lug Over the Side (.) See Page = Stud See Page = Feed Thru Solder See Page 0 00 = Solder Pin See Page 0 0 = Solder Pin (Slotted Screw) See Page 0 See pages 96- for terminal block accessories 70

72 Single Row Terminal Blocks Kulka 699/899 Series 50 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-0F) Material Available Screws, #6- Binder Head, Phil-Slot, Steel Terminals, Plated Brass - Poles 7/6 Centers Wire Range With Wire Binding Screw #4-#6 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 899 Series (Riveted KTs) See page 97 UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Number Dimensions Catalog of Description Poles A B 699 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT46 = Full Quick Connect (0 Flat) See Page 97 KT47 = Full Quick Connect (45 Bend) See Page 97 KT48 = Full Quick Connect (90 Bend) See Page 97 J 60 = Line to Line Jumper See Page 0 60 RJ(S)= Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT5 = Half Quick Connect (0 Flat) See Page 97 KT5 = Half Quick Connect (45 Bend) See Page 97 KT54 = Half Quick Connect (90 Bend) See Page 97 Z = Lug Over the Side (.47) See Page 00 0 = Stud See Page 0 04 = Feed Thru Solder See Page 0 0 = Solder Pin See Page 0 = Solder Pin See Page 0 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 7 Single/Double Row Terminal Blocks

73 Single Row Terminal Blocks Kulka 8/9 Series 600 Volts Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-0F) Material Available Screws, #8- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -8 Poles 9/6 Centers Wire Range With Wire Binding Screw #-#4 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 9 Series (Riveted KTs) See page 97 UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks Number Dimensions Catalog of Description Poles A B 8 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT7 = Full Quick Connect (0 Flat) See Page 97 KT74 = Full Quick Connect (45 Bend) See Page 97 KT75 = Full Quick Connect (90 Bend) See Page 97 J 60 = Line to Line Jumper See Page 0 /4 ST = Half Solder See Page 99 KT79 = Half Quick Connect (0 Flat) See Page 97 KT80 = Half Quick Connect (45 Bend) See Page 97 KT8 = Half Quick Connect (90 Bend) See Page 97 Z = Lug Over the Side (.64) See Page 00 0 = Stud See Page 0 04 = Feed Thru Solder See Page 0 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 7

74 Single Row Terminal Blocks Kulka 690 Series 00 Volts Base, Phenolic, 50 C Screws, #6- Binder Head, Phil-Slot, Brass 7/6 Centers Terminals, Plated Brass Wire Range #4 Max. 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR GP / 69 GP / 69 GP 69 GP PSB / 69 GP / 69 GP Number Dimensions of Terminals A B MM=Dim X 5.4 Number Dimensions of Terminals A B Add PSB after part # Solder terminal K=.5 [.0] W=.06 [.59] Kliptite terminal Solder terminal K=.58 [4.68] W=. [.8] 694 GP / 695 GP / 696 GP 694 GP / 695 GP / 696 GP Number Dimensions of Terminals A B MM=Dim X 5.4 Number Dimensions of Terminals A B Add PSB after part # Solder terminal K=.5 [.0] W=.06 [.59] Kliptite terminal Solder terminal K=.58 [4.68] W=. [.8] Single/Double Row Terminal Blocks

75 Single Row Terminal Blocks Kulka 690 Series 00 Volts 697 GP / 698 GP / 699 GP Number Dimensions of Terminals A B MM=Dim X 5.4 Add PSB after part # Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) KT46 = Full Quick Connect (0 Flat) See Page 97 KT47 = Full Quick Connect (45 Bend) See Page 97 KT48 = Full Quick Connect (90 Bend) See Page 97 J 60 = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT5 = Half Quick Connect (0 Flat).50 See Page 97 KT5 = Half Quick Connect (45 Bend).50 See Page 97 KT54 = Half Quick Connect (90 Bend).50 See Page 97 See pages 96- for terminal block accessories 74 Solder Terminal 697 GP K=.5 W=.06 [.0] [.59] 698 GP Kliptite Terminal 699 GP Solder Terminal K=.58 W=. [4.68] [.8]

76 Single Row Terminal Blocks Kulka 590 Series 50 Volts Base, Phenolic, 50 C Screws, #6- Binder Head, Slotted, Brass /8 Centers Terminals, Plated Brass Wire Range #6 Max. 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Number of 59A GP / 59A GP Dimensions Terminals A B MM=Dim X A GP / 599A GP Number Dimensions of Terminals A B MM=Dim X 5.4 Number of 59A GP / 59A GP Dimensions Terminals A B Hardware Options: (Hardware options may affect ratings - consult factory) KT8 = Full Quick Connect (0 Flat) See Page 97 KT4 = Half Quick Connect (0 Flat) See Page 97 KT9 = Full Quick Connect (45 Bend) See Page 97 KT5 = Half Quick Connect (45 Bend) See Page 97 KT0 = Full Quick Connect (90 Bend) See Page 97 KT6 = Half Quick Connect (90 Bend) See Page 97 J 600 = Line to Line Jumper See Page 0 Z = Lug Over the Side (.7) 600 RJ(S) = Multiple Position Jumper See Page 0 Y = Lug Over the Side (.59) /4 ST = Half Solder See Page 99 59A PC = Printed Circuit (.0 X.09) 000 = Wire Wrap Lug (.64) 599A PC = Printed Circuit (.0 X.09) 59A PC = Printed Circuit (.0 X.06) 597A PC = Printed Circuit (.0 X.06) See pages 96- for terminal block accessories Add PSB after part # Number of 597A GP / 599A GP Dimensions Terminals A B Add PSB after part # 75 Single/Double Row Terminal Blocks

77 Single Row Terminal Blocks Kulka 690 Series 00 Volts Single/Double Row Terminal Blocks 697 GP / 698 GP / 699 GP 697A GP / 698A GP / 699A GP Number Dimensions of Terminals A B MM=Dim X 5.4 Add PSB after part # Hardware Options: (Hardware options may affect ratings - consult factory) KT8 = Full Quick Connect (0 Flat).87 See Page 97 KT9 = Full Quick Connect (45 Bend).87 See Page 97 KT0 = Full Quick Connect (90 Bend).87 See Page 97 KT4 = Half Quick Connect (0 Flat).87 See Page 97 KT5 = Half Quick Connect (45 Bend).87 See Page 97 KT6 = Half Quick Connect (90 Bend).87 See Page 97 KT46 = Full Quick Connect (0 Flat).50 See Page 97 KT47 = Full Quick Connect (45 Bend).50 See Page 97 KT48 = Full Quick Connect (90 Bend).50 See Page 97 KT5 = Half Quick Connect (0 Flat).50 See Page 97 KT5 = Half Quick Connect (45 Bend).50 See Page 97 KT54 = Half Quick Connect (90 Bend).50 See Page 97 J 60 = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 Z = Lug Over the Side (.44) Y = Lug Over the Side (.609) See pages 96- for terminal block accessories Definition Barrier Ends: 697 GP = #6- Brass Screw, Printed Circuit Width = A GP = #8- Brass Screw, Printed Circuit Width = GP = #6- Brass Screw, Solder Turret (not shown) 698A GP = #8- Brass Screw, Solder Turret (not shown) 699 GP = #6- Brass Screw, Printed Circuit Width = A GP = #8- Brass Screw, Printed Circuit Width =.09 76

78 Single Row Terminal Blocks Kulka 690 Series 00 Volts Base, General Purpose Phenolic, 50 C Screws, #6- Binder Head, Slotted Or 8- Binder Head, Slotted, Brass 7/6 Centers Terminals, Plated Brass Wire Range #4-#6 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR GP / 695 GP / 696 GP 694A GP / 695A GP / 696A GP Number of Terminals Dimensions A B MM = Dim X 5.4 Add PSB after part # *See page 76 for hardware options. Definition Mount Ends: 694 GP = #6- Brass Screw, Printed Circuit Width = A GP = #8- Brass Screw, Printed Circuit Width = GP = #6- Brass Screw, Solder Turret (not shown) 695A GP = #8- Brass Screw, Solder Turret (not shown) 696 GP = #6- Brass Screw, Printed Circuit Width = A GP = #8- Brass Screw, Printed Circuit Width = Single/Double Row Terminal Blocks

79 Double Row Terminal Blocks General Information: Double Row Terminal Blocks are available in four basic line to line molding sizes. Some are available in either open or closed back designs. The basic material is phenolic, however thermoplastic is also available on certain sizes. Modifications are also provided on most terminal blocks, including marking strips. Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, and service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Ratings based on UL 059 may be higher in some cases depending on application. Reference Chart: Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Single/Double Row Terminal Blocks Catalog Base Max Wire Screw Inches # of Series Page Amps Volts Material Size for Screw Size L to L Lines Features 00/670A GP Phenolic # Closed Back 00/67 GP Phenolic # Closed Back 00HB Phenolic # High Barrier/ Closed Back 00/67 GP Phenolic # Closed Back Phenolic # Closed Back *00 Phenolic # Open Back Phenolic # Open Back 600A/800A Phenolic # Open Back 60/ Phenolic # Open Back 60/ Phenolic # Open Back Phenolic # Open Back Phenolic # Open Back Phenolic # / Open Back 6 RZ Thermoplastic # High Barrier/ Closed Back 670A RZ 9 0 *00 Thermoplastic # Closed Back 67 RZ 94 0 *00 Thermoplastic # Closed Back 67 RZ Thermoplastic # Closed Back All voltage ratings based on Class C requirements unless noted. Open back terminal blocks require an insulator strip to achieve voltage rating. *Based on Class B requirements. 78

80 Double Row Terminal Blocks 00 Series Kulka 670A GP Series 50 Volts Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -6 Poles /8 Centers Wire Range With Wire Binding Screw #-# AWG 0 Amps Wire Range With Sems Pressure Screw #8-# AWG Stranded Copper Wire Only, 50 Volts 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 MSP Kulka Dimensions Catalog # Catalog # # of poles A B MSP Kulka Dimensions Catalog # Catalog # # of poles A B 0 670A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP Top Mounted Hardware is.87 Wide MM=Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT9 = Full Quick Connect (0 flat) See Page 98 (F) KT0 = Full Quick Connect (45 Bend) See Page 98 (F) KT = Full Quick Connect (90 Bend) See Page 98 (S) ST = Full Solder See Page 99 (LL00) J 600 = Line to Line Jumper See Page 0 600RJ(S) = Multiple Position Jumper See Page 0 (HS) /4 ST = Half Solder See Page 99 (HF) KT5 = Half Quick Connect (0 Flat) See Page 98 (HF) KT6 = Half Quick Connect (45 Bend) See Page 98 (HF) KT7 = Half Quick Connect (90 Bend) See Page 98 (L) Y = Feed Thru Solder (.) LWW = Feed Thru Wire Wrap (.59) YSY = Feed Thru Solder (.500) PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 79 Single/Double Row Terminal Blocks

81 00 Series Kulka 67 GP Series 00 Volts Double Row Terminal Blocks Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -0 Poles 7/6 Centers Wire Range With Wire Binding Screw #-# AWG 0 Amps Wire Range With Sems Pressure Screw #-# AWG Stranded Copper Wire Only, 0 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Single/Double Row Terminal Blocks MSP Kulka Dimensions MSP Kulka Catalog # Catalog # # of poles A B 0 67 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP MM=Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT7 = Full Quick Connect (0 flat) See Page 98 (F) KT8 = Full Quick Connect (45 Bend) See Page 98 (F) KT9 = Full Quick Connect (90 Bend) See Page 98 (S) ST = Full Solder See Page 99 (LL 00) J60 = Line to Line Jumper See Page 0 60RJ(S) = Multiple Position Jumper See Page 0 (HS) /4 ST = Half Solder See Page 99 (HF) KT4 = Half Quick Connect (0 Flat) See Page 98 (HF) KT44 = Half Quick Connect (45 Bend) See Page 98 (HF) KT45 = Half Quick Connect (90 Bend) See Page 98 (SP) 765 = Sems Pressure Saddle Screw See Page 0 (SPSE) 767 = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.640) (L) Y = Feed Thru Solder (.47) YSY = Feed Thru Solder (.65) PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 80 Dimensions Catalog # Catalog # # of poles A B 6 67 GP GP GP GP GP GP GP GP GP GP GP GP GP GP GP

82 Double Row Terminal Blocks 00 HB Series (High Barrier) 600 Volts (See Page 9 for Thermoplastic Version 6 RZ) Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #6- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -0 Poles 7/6 Centers Wire Range With Wire Binding Screw #-# AWG 0 Amps Wire Range With Sems Pressure Screw #-# AWG Stranded Copper Wire Only, 0 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 0HB HB.6. 0HB HB HB HB HB HB HB HB HB HB HB HB HB MM = Dim x 5.4 Top Mounted Hardware is.50 Wide Hardware Options: (Hardware options may affect ratings - consult factory) Dimensions Catalog # # of poles A B 6HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB (F) = Full Quick Connect (0 flat) See Page 98 (F) = Full Quick Connect (45 Bend) See Page 98 (F) = Full Quick Connect (90 Bend) See Page 98 (S) = Full Solder See Page 99 LL 00HB = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 (HS) = Half Solder See Page 99 (HF) = Half Quick Connect (0 Flat) See Page 98 (HF) = Half Quick Connect (45 Bend) See Page 98 (HF) = Half Quick Connect (90 Bend) See Page 98 (SP) = Sems Pressure Saddle Screw See Page 0 (SPSE) = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.640) Y(L) = Feed Thru Solder (.65) YSY = Feed Thru Solder (.47) PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 8 Single/Double Row Terminal Blocks

83 00 Series Kulka 67 GP Series 600 Volts MSP Kulka Dimensions Catalog # Catalog # # of poles A B 0 67 GP GP GP GP GP GP GP GP GP GP GP GP Double Row Terminal Blocks Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #8- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -4 Poles 9/6 Centers Wire Range with Wire Binding Screw # 0 - #4 AWG - 0 Amps Wire Range with Sems Pressure Screw #0 - # AWG Stranded Copper Wire Only, 0 Amps Will Accommodate Lugs for Wire Sizes #0 - #6 AWG - 0 Amps The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 MSP Kulka Dimensions Catalog # Catalog # # of poles A B 67 GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.50 Wide MM = Dim x 5.4 Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) MSP KULKA (F) KT55 = Full Quick Connect (0 Flat) See Page 98 (F) KT56 = Full Quick Connect (45 Bend) See Page 98 (F) KT57 = Full Quick Connect (90 Bend) See Page 98 (S) ST = Full Solder See Page 99 (LL 00) J 60 = Line to Line Jumper See Page 0 (HS) /4 ST = Half Solder See Page 99 (HF) KT6 = Half Quick Connect (0 Flat) See Page 98 (HF) KT6 = Half Quick Connect (45 Bend) See Page 98 (HF) KT6 = Half Quick Connect (90 Bend) See Page 98 (SP) 786 = Sems Pressure Saddle Screw See Page 0 (SPSE) = Sems Pressure Saddle Screw with External Tooth Lock Washer LWW = Feed Thru Wire Wrap (.00) (L) Y = Feed Thru Solder (.47) YSY = Feed Thru Solder (.65) PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 8

84 Double Row Terminal Blocks 400 Series 600 Volts Base, General Purpose Phenolic, 50 C Closed Back Design Screws, #0- Binder Head, Phil-Slot, Steel Terminals, Plated Brass - Poles /6 Centers Wire Range With Wire Binding Screw #0-# AWG 0 Amps Wire Range With Sems Pressure Screw #0-# AWG Stranded Copper Wire Only, 0 Amps Will Accommodate Lugs For Wire Sizes #6-#6 AWG 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Hardware Options: (Hardware options may affect ratings - consult factory) PSB = Phil-Slot Brass Screw SPSE = Sems Pressure Saddle Screw J 60 (LL 400) = Line to Line Jumper See Page 0 See pages 96- for terminal block accessories Dimensions Catalog # # of poles A B Single/Double Row Terminal Blocks

85 Double Row Terminal Blocks Kulka 40 GP Series 00 Volts* Base, Phenolic, 50 C Open Back Design (Insulator Strip Required for Voltage Rating) JJ (GDI-0F) Material Available Screws, #-56 X 7/ Binder Head, Phil-Slot, Brass Terminals, Plated Brass - Poles /4 Centers Wire Range With Wire Binding Screw #8-#0 AWG 5 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 40 GP 0 PSB GP 0 PSB GP 0 PSB GP 04 PSB GP 05 PSB GP 06 PSB GP 07 PSB GP 08 PSB GP 09 PSB GP 0 PSB GP PSB GP PSB.50.5 Dimensions Catalog # # of poles A B 40 GP PSB GP 4 PSB GP 5 PSB GP 6 PSB GP 7 PSB GP 8 PSB GP 9 PSB GP 0 PSB GP PSB GP PSB GP PSB * Voltage Based on Class B Requirements MM = Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) J 40 = Line To Line Jumper See Page 0 Y = Feed Thru Solder (.) 9 = Printed Circuit Pin (.09) Single/Double Row Terminal Blocks See pages 96- for terminal block accessories 84

86 Double Row Terminal Blocks Kulka 600 GP Series 00 Volts Base, Phenolic, 50 C /8 Centers JJ (GDI-0F) Material Available Wire Range With Wire Binding Screw Open Back Design (Insulator Strip Required for #-# AWG 5 Amps Voltage Rating) UL Recognized File No. XCFR.E478 Screws, #5-40 Binder Head, Phil-Slot, Brass CSA Certified File No. LR9766 Terminals, Plated Brass - Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 600 GP 0 PSB GP 0 PSB GP 0 PSB GP 04 PSB GP 05 PSB GP 06 PSB GP 07 PSB GP 08 PSB GP 09 PSB GP 0 PSB GP PSB Top Mounted Hardware is.87 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 600 GP PSB GP PSB GP 4 PSB GP 5 PSB GP 6 PSB GP 7 PSB GP 8 PSB GP 9 PSB GP 0 PSB GP PSB GP PSB Hardware Options: (Hardware options may affect ratings - consult factory) KT9 = Full Quick Connect (0 flat) See Page 98 KT0 = Full Quick Connect (45 Bend) See Page 98 KT = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 600 = Line to Line Jumper See Page RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT5 = Half Quick Connect (0 Flat) See Page 98 KT6 = Half Quick Connect (45 Bend) See Page 98 KT7 = Half Quick Connect (90 Bend) See Page 98 Y = Feed Thru Solder (.) See Page 00 YSY = Feed Thru Solder (.500) See Page 00 Z = Lug Over the Side (.65) See Page = Feed Thru Solder See Page 0 See pages 96- for terminal block accessories 85 Single/Double Row Terminal Blocks

87 Double Row Terminal Blocks Kulka 600A/800A GP Series 00 Volts Base, Phenolic, 50 C /8 Centers JJ (GDI-0F) Material Available Wire Range With Wire Binding Screw Open Back Design (Insulator Strip Required for #-# AWG 5 Amps for Voltage Rating) 800A Series (Riveted KTs) See page 98 Screws, #6- Binder Head, Phil-Slot, Steel UL Recognized File No. XCFR.E478 Terminals, Plated Brass CSA Certified File No. LR Poles The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 600A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP Top Mounted Hardware is.87 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 600A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP A GP Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT9 = Full Quick Connect (0 Flat) See Page 98 KT0 = Full Quick Connect (45 Bend) See Page 98 KT = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 600 = Line to Line Jumper See Page RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT5 = Half Quick Connect (0 Flat) See Page 98 KT6 = Half Quick Connect (45 Bend) See Page 98 KT7 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 0 Y = Feed Thru Solder (.) YSY = Feed Thru Solder (.500) Z = Lug Over the Side (.65) 00 = Stud See Page 0 PSB = Phil-Slot Brass Screw 860 = Wire Clamp Screw Brass See Page 0 See pages 96- for terminal block accessories 86

88 Double Row Terminal Blocks Kulka 60/80 GP Series 00 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-0F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #6- Binder Head, Phil-Slot, Steel Terminals, Plated Brass - Poles 7/6 Centers Wire Range With Wire Binding Screw #-# AWG 0 Amps Will Accommodate Lugs For Wire Sizes #0-#6 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 80 Series (Riveted KTs) See page 98 UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.50 Wide MM = Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) KT7 = Full Quick Connect (0 Flat) See Page 98 KT8 = Full Quick Connect (45 Bend) See Page 98 KT9 = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 60 = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT4 = Half Quick Connect (0 Flat) See Page 98 KT44 = Half Quick Connect (45 Bend) See Page 98 KT45 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 0 Y = Feed Thru Solder (.4) See Page 00 YSY = Feed Thru Solder (.687) See Page 00 0 = Stud See Page 0 04 = Feed Thru Solder See Page 0 08 = Individual Screw Terminals See Page 0 PSB = Phil-Slot Brass Screw 760 = Wire Clamp Screw See Page 0 87 See pages 96- for terminal block accessories Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP Single/Double Row Terminal Blocks

89 Double Row Terminal Blocks Kulka 60/80 GP Series 00 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-0F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #8- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -6 Poles 9/6 Centers Wire Range With Wire Binding Screw #-#4 AWG 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application 80 Series (Riveted KTs) See page 98 UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP GP GP Top Mounted Hardware is.50 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP GP GP Hardware Options: (Hardware options may affect ratings - consult factory) Single/Double Row Terminal Blocks KT55 = Full Quick Connect (0 Flat) See Page 98 KT56 = Full Quick Connect (45 Bend) See Page 98 KT57 = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J60 = Line to Line Jumper See Page 0 /4 ST = Half Solder See Page 99 KT6 = Half Quick Connect (0 Flat) See Page 98 KT6 = Half Quick Connect (45 Bend) See Page 98 KT6 = Half Quick Connect (90 Bend) See Page = Wire Clamp Screw See Page 0 Y = Feed Thru Solder (.500) See Page 00 YSY = Feed Thru Solder (.67) See Page 00 Z = Lug Over the Side (.609) See Page 00 0 = Stud See Page 0 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 88

90 Double Row Terminal Blocks Kulka 60 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-0F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #0- Binder Head, Phil-Slot, Steel Terminals, Plated Brass - Poles /6 Centers Wire Range With Wire Binding Screw #0-# AWG 50 Amps Will Accommodate Lugs For Wire Sizes #6-#6 AWG 65 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Hardware Options: (Hardware options may affect ratings - consult factory) J 60 = Line to Line Jumper See Page 0 Y = Feed Thru Solder (.60) See Page 00 0 = Stud See Page 0 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories Dimensions Catalog # # of poles A B 60 GP GP GP GP GP GP GP GP GP GP GP GP MM = Dim X 5.4. [5.5] A B.69 [7.4] Ø.0 [Ø5.] THRU C'BORE Ø.5 [6.4] X.09 [.] DP..75 [9.].44 [.].48 [.] #0- X.8[9.5] BD HD SCREW.6 [5.9] [7.0].8 [46.0] Single/Double Row Terminal Blocks

91 Double Row Terminal Blocks Kulka 604 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-0F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #- Binder Head, Phil-Slot, Brass Terminals, Plated Brass -8 Poles 7/8 Centers Wire Range With Wire Binding Screw #4-# AWG 70 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 604 GP 0 PSB GP 0 PSB GP 0 PSB GP 04 PSB GP 05 PSB GP 06 PSB GP 07 PSB GP 08 PSB MM = Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) 40 = Stud 0 - Brass (.4 H) Nuts Included See Page 0 J 604 = Line to Line Jumper See Page 0 See pages 96- for terminal block accessories Single/Double Row Terminal Blocks 90

92 Double Row Terminal Blocks Kulka 605 GP Series 600 Volts Base, General Purpose Phenolic, 50 C JJ (GDI-0F) Material Available Open Back Design (Insulator Strip Required for Voltage Rating) Screws, #/4-8 Binder Head, Slotted, Brass Terminals, Plated Brass -6 Poles -/8 Centers Wire Range With Wire Binding Screw #-# AWG 90 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 605 GP 0 SLB GP 0 SLB GP 0 SLB GP 04 SLB GP 05 SLB GP 06 SLB MM = Dim X 5.4 Hardware Options: (Hardware options may affect ratings - consult factory) 50 = Stud /4-8 Brass (.750 H) Nuts Included See Page 0 J 605 = Line to Line Jumper See Page 0 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 9 Single/Double Row Terminal Blocks

93 Double Row Terminal Blocks 6 RZ Series 600 Volts Base, Thermoplastic, 5 C (U.L. RTI) Wire Range With Wire Binding Screw Closed Back Design #-# AWG 0 Amps Screws, #6- Binder Head, Phil-Slot, Steel Wire Range With Sems Pressure Screw #-# Terminals, Plated Brass AWG Stranded Copper Wire Only 0 Amps -0 Poles UL Recognized File No. XCFR.E6806 7/6 Centers CSA Certified File No. LR9766 The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 6 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.50 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 6 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) KT7 = Full Quick Connect (0 flat) See Page 98 KT8 = Full Quick Connect (45 Bend) See Page 98 KT9 = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 LL 00 HB = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT4 = Half Quick Connect (0 Flat) See Page 98 KT44 = Half Quick Connect (45 Bend) See Page 98 KT45 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page = Sems Pressure Saddle Screw with External Tooth Lock Washer PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 9

94 Double Row Terminal Blocks 670A RZ Series 00 Volts Base, Thermoplastic, 0 C (U.L. RTI) Wire Range With Wire Binding Screw Closed Back Design #-# AWG 0 Amps Screws, #6- Binder Head, Phil-Slot, Steel Wire Range With Sems Pressure Screw Terminals, Plated Brass #4-# AWG Stranded Or Solid Wire -0 Poles (Cat. Designation 865) /8 Centers UL Recognized File No. XCFR.E478 The Suitability Of These Devices For Greater CSA Certified File No. LR9766 Currents Shall Be Determined In The End-Use Application Dimensions Catalog # # of poles A B 670A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ Top Mounted Hardware is.87 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 670A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ A RZ Hardware Options: (Hardware options may affect ratings - consult factory) KT9 = Full Quick Connect (0 Flat) See Page 98 KT0 = Full Quick Connect (45 Bend) See Page 98 KT = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 600 = Line to Line Jumper See Page RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT5 = Half Quick Connect (0 Flat) See Page 98 KT6 = Half Quick Connect (45 Bend) See Page 98 KT7 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page 0 Y(L) = Feed Thru Solder (.) See Page 00 YSY = Feed Thru Solder (.500) See Page 00 PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 9 Single/Double Row Terminal Blocks

95 Double Row Terminal Blocks 67 RZ Series 00 Volts Base, Thermoplastic, 5 C (U.L. RTI) Wire Range With Wire Binding Screw Closed Back Design #-# AWG 0 Amps Screws, #6- Binder Head, Phil-Slot, Steel Wire Range With Sems Pressure Screw #-# Terminals, Plated Brass AWG Stranded Copper Wire Only 0 Amps -0 Poles Will Accommodate Lugs For Wire Sizes 7/6 Centers #0-#6 AWG 0 Amps The Suitability Of These Devices For Greater UL Recognized File No. XCFR.E6806 Currents Shall Be Determined In The CSA Certified File No. LR9766 End-Use Application Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.50 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Single/Double Row Terminal Blocks Hardware Options: (Hardware options may affect ratings - consult factory) KT7 = Full Quick Connect (0 Flat) See Page 98 KT8 = Full Quick Connect (45 Bend) See Page 98 KT9 = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 60 = Line to Line Jumper See Page 0 60 RJ(S) = Multiple Position Jumper See Page 0 /4 ST = Half Solder See Page 99 KT4 = Half Quick Connect (0 Flat) See Page 98 KT44 = Half Quick Connect (45 Bend) See Page 98 KT45 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page = Sems Pressure Saddle Screw with External Tooth Lock Washer PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 94

96 Double Row Terminal Blocks 67 RZ Series 600 Volts Base, Thermoplastic, 5 C (U.L. RTI) Closed Back Design Screws, #8- Binder Head, Phil-Slot, Steel Terminals, Plated Brass -4 Poles 9/6 Centers Wire Range With Wire Binding Screw #0-#4 AWG 0 Amps Wire Range With Sems Pressure Screw #0-# AWG Stranded Copper Wire Only 0 Amps The Suitability Of These Devices For Greater Currents Shall Be Determined In The End-Use Application UL Recognized File No. XCFR.E478 CSA Certified File No. LR9766 Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Top Mounted Hardware is.50 Wide MM = Dim X 5.4 Dimensions Catalog # # of poles A B 67 RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ RZ Hardware Options: (Hardware options may affect ratings - consult factory) KT55 = Full Quick Connect (0 Flat) See Page 98 KT56 = Full Quick Connect (45 Bend) See Page 98 KT57 = Full Quick Connect (90 Bend) See Page 98 ST = Full Solder See Page 99 J 60 = Line to Line Jumper See Page 0 /4 ST = Half Solder See Page 99 KT6 = Half Quick Connect (0 Flat) See Page 98 KT6 = Half Quick Connect (45 Bend) See Page 98 KT6 = Half Quick Connect (90 Bend) See Page = Sems Pressure Saddle Screw See Page = Sems Pressure Saddle Screw with External Tooth Lock Washer PSB = Phil-Slot Brass Screw See pages 96- for terminal block accessories 95 Single/Double Row Terminal Blocks

97 Terminal Block Accessories Kliptite (Quick Connect) Accessories Kliptite (Quick Connect) accept standard female wire terminals. These Kliptites are ideal for applications that require a positive, yet quick disconnect termination. Kliptites are assembled to the block with screws or in some applications riveted to the block. Kliptites are available in 0, 45 and 90 bends; one side or two side. Single Row: Screw Rivet Tab Tab Construction Construction Width Thickness ) 590 Series use the 599 series Kliptites. ) 690 Series insulated feed-thru blocks use the 699 Kliptites. ) 690 Series PC block use the 699 Kliptites. Double Row: Screw Rivet Tab Tab Construction Construction Width Thickness 00, 670, 670A, 670ARZ , 67, 67RZ, 00HB, 6RZ , 67, 67RZ , 600A 800A ) 00, 670, 670A, 670ARZ Series use the 600, 600A Kliptites. 5) 00, 67, 67RZ, 00HB, 6RZ Series use the 60 Kliptites. 6) 00, 67, 67RZ Series use same as 60 Kliptites. 96

98 Accessories Kliptite Quick Connect Single Row 4 Series 599 Series 699 Series 8 Series Screw Construction Screw Construction Screw Construction Screw Construction Tab Width.0 Tab Width.87 Tab Width.50 Tab Width.50 Tab Thickness.00 Tab Thickness.00 Tab Thickness.0 Tab Thickness Series 899 Series 9 Series Rivet Construction Rivet Construction Rivet Construction Tab Width.87 Tab Width.50 Tab Width.50 Tab Thickness.00 Tab Thickness.0 Tab Thickness.0 Specifications - see Specifications - see Specifications - see page 70 (599) page 7 (699) page 7 (8) Terminal Block Accessories TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS Material: Brass Finish: TIN 97

99 Terminal Block Accessories Kliptite Quick Connect Double Row Accessories 00, 600, 600A 60, 00, 00HB 00 Series 670, 670A, 670A RZ 6, 67 Series 60, 67 Series 60 Series Series Screw Construction Screw Construction Screw Construction Screw Construction Tab Width.87 Tab Width.50 Tab Width.50 Tab Width.50 Tab Thickness.00 Tab Thickness.0 Tab Thickness.0 Tab Thickness.0 800A Series 80 Series 80 Series Rivet Construction Rivet Construction Rivet Construction Tab Width.87 Tab Width.50 Tab Width.50 Tab Thickness.00 Tab Thickness.0 Tab Thickness.0 Specifications - see Specifications - see Specifications - see page 86 (600A) page 87 (60) page 88 (60) TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS TWO SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS ONE SIDE TABS Material: Brass Finish: TIN 98

100 Accessories Solder Terminal Lugs: ST & /4 ST Types Terminal Block Accessories Figure A Figure Figure A Figure Figure Figure A B C D E F G H J M N R T ALSO USED ON 4ST FIGURE 4-/4ST FIGURE A 599-/4ST FIG , 590A 600ST FIG A, 670A /4ST FIG A ST FIG HB, 6RZ /4ST FIG A ST FIG /4ST FIG A /4ST FIG , /4ST FIG MM = Dim X 5.4 ST = (S) /4 ST = (HS) * To ensure solderability, use within six (6) months. 99

101 Terminal Block Accessories Solder Terminal Lugs: Y, YSY & Z Types Material: Brass Finish Electro-Tin Plated Accessories Style Y YSY Figure Figure Figure Same as Fig except as shown Same as Fig except as shown Style Z Figure 4 Figure 5 Same as Fig 4 except as shown Figure 6 Note: For Factory Assembly only onto 60 Terminal Boards Style Y YSY XY Detail R Style Z Catalog # Figure A B C D E F H J M L (see detail R) also used on 599Z & 600Y FIG Z=0., 600Y=0. 670A RZ NA 0.44 NA 600YSY FIG A RZ Z FIG A RZ 699Z & 60Y FIG Z=0.4, 60Y= YSY FIG NA 60Y FIG NA Z & 60YSY FIG Z=0.64, 60YSY= Z FIG Y FIGURE 6 Note: for factory assembly only to 60 terminal block 0.60 MM = Dim X 5.4 * To ensure solderability, use within six (6) months. 00

102 Accessories J & JS Jumpers J 600 = LL 00 J 60 = LL 00 J 60 = LL 00 LL 00HB RJ Type Jumpers J & LL Type Jumper Material: Brass Finish: Nickel Plate JS Type Jumper *Per 5564/8B Catalog # A B C D E F G H J K J 40 (J4) NA J NA J NA J NA J NA J NA J NA JS JS JS LL 00HB MM = Dim X 5.4 Note : These parts are not necessarily supplied flat. The functioning of the part, however will not be interfered. Note : All dimensions are applicable after the bus (jumper) is torqued down into the associate terminal board Terminal Block Accessories RJS Type Jumpers Material: Brass Finish: Nickel Plate Max. no. of sections = 4 Max. no. of sections = RJ 60 RJ Note: 670ARZ, 599 Series: Use 600 RJ Wire Clamp Material: Brass Finish: Nickel Plate Max. no. of sections = RJS Note: 670ARZ, 599 Series: Use 600 RJS Max. no. of sections = 4 60 RJS Catalog # Material Finish Screw Thread L A UNC Steel Nickel UNC UNC Brass Nickel UNC Brass Nickel 6- UNC Steel Nickel 6- UNC MM = Dim X 5.4 Straddle Plate Note: Termi-lox washer or equal CAT. NO. A B C D E F MATERIAL FINISH SPB N/A BRASS TIN SPB N/A BRASS NICKEL SPB N/A BRASS NICKEL SPB BRASS TIN SPB BRASS TIN SPB BRASS NICKEL MM = Dim X 5.4 0

103 Terminal Block Accessories Kulka Fanning Strips Terminals, Brass, Tin Plated Material: XP = Phenolic, Black GME = Glass Cloth Melamine, Per MIL-M-4 Light Brown Term 649 SERIES FOR 40 & 4 SERIES TERMINAL BLOCKS Accessories Available in XP phenolic only. 649 SERIES 649A SERIES 650 SERIES FOR 599, 600, 670A RZ SERIES TERMINAL BLOCKS 65 SERIES FOR 60 & 699 SERIES TERMINAL BLOCKS 65 SERIES FOR 60 & 8 SERIES TERMINAL BLOCKS SERIES W SERIES A A A (L) LEFT (R) RIGHT 0

104 Accessories Kulka Stud and Turret Terminal Blocks Marathon Offers Kulka Terminal Blocks with Stud and Turret Configurations: Threaded Stud Catalog # Figure A B C 599 GP 00 XX FIG NC 600A GP 00 XX FIG NC 60 GP 0 XX FIG NC 60 GP 0 XX FIG NC 60 GP 0 XX FIG NF 604 GP 40 XX FIG NF 605 GP 50 XX FIG /4-8 NF 699 GP 0 XX FIG NC 8 GP 0 XX FIG NC Terminal Block Accessories XX - Number of Terminals Note : Standard with block, but packed separately. Note : 604 and 605 nuts are part of the assembly. Additional nuts (one per stud) are supplied in bulk. Screw Terminal with Feed-thru Solder Terminal Catalog # Figure A B C D 4 GP 904 XX FIG NC X GP 004 XX FIG NC X GP 004 XX FIG NC X GP 04 XX FIG NC X GP 04 XX FIG NC X GP 04 XX FIG NC X XX - Number of Terminals Screw Terminal with Solder Pin for Printed Circuit Board Connection Catalog # A B C D E 599 GP 00 XX NC X GP 0 XX NC X GP 0 XX NC X GP XX NC X.5 XX - Number of Terminals Individual Screw Terminals Catalog # A B C 60 GP 08 XX NC X.5 XX - Number of Terminals 0

105 Terminal Block Accessories Double Row/Top Mounted Cover Accessories White Vinyl Material Two Nylon Spring Clips For Mounting Provided Printed On Top, Bottom Or Center Line With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Series = 00/670A GP, 600 GP, 600A, 670A RZ Number of A B Terminals Series = 00/67 GP, 00HB, 60 GP, 6 RZ, 67 RZ Number of A B Terminals COVER (WHITE) CB (BLACK) 04 ORDERING CODE Series = 00/67 GP 60 GP, 67 RZ Number of A B Terminals NYLON SPRING CLIP CW 05 0A SERIES NO. OF TERMINALS NOTE: PRINT STYLE Add HB if using 00HB Terminal Block

106 Accessories Double Row/Sub Mounted Marking Strip Black XP Phenolic Material Printed On Top Or Bottom Position With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Terminal Block Accessories # of Poles 00 Series A 00HB Series A 00 Series A Series B C D E F HB

107 Terminal Block Accessories Double Row/Top Mounted Marking Strip White Vinyl Material Two Nylon Spring Clips For Mounting Provided Printed On The Center Line With Letters Or Numbers For Circuit Identification Printing Character Size Is /8 Inch Accessories Series = 00/670A GP 600 GP, 600A GP, 670A RZ Number of A B Terminals Series = 00/67 GP, 00HB, 60 GP, 6 RZ, 67 RZ Number of A B Terminals MARKING STRIP (WHITE) 06 SERIES Series = 00/67 GP, 60 GP, 67 RZ Number of A B Terminals NYLON SPRING CLIP NO. OF TERMINALS PRINT STYLE SW 0 0A NOTE: Add HB if using 00HB Terminal Block

108 Accessories Marking and Insulator Strips: Kulka marking strips serve as insulation between terminal blocks and chassis, as well as providing a marking surface for terminal identification. When specified, they can be printed to show terminal designations by numbers, letters, symbols or any combination thereof. Insulator strips offer the same properties, but do not provide space for terminal identification. Both marking and insulator strips can be supplied pre-mounted on the back of each block thereby simplifying assembly and inventory control. DOUBLE ROW MARKING STRIP EXAMPLE SINGLE ROW MARKING STRIP EXAMPLE Terminal Block Accessories DOUBLE ROW MARKING STRIP EXAMPLE SINGLE ROW MARKING STRIP EXAMPLE Drawing and Dimensions: Marking and insulator strips are available for Kulka Terminal Blocks. These include double and single row/single row insulated turret. Dimensions for insulator strips, which are more narrow (see dimension N on pages 08 and 09) and do not afford a marking surface are the same as marking strips except for dimension D. Order Information: FEED-THRU STYLE: For feed-thru terminal blocks, see styles,, 5, 6, 8, & 9 on page 08. Insert applicable feed-thru style designation in ordering code, i.e. Y, YSY, XY, 904, 9, 000, 004, 00, 0, 04, 0, 000. AVAILABILITY: Marking and insulator strips are available to fit most Kulka Terminal Blocks. See SERIES reference numbers on pages 08 and 09 for a complete listing. If not listed, consult the factory for availability. Designate appropriate prefix (MS for marking strips or IS for insulator strip) in front of the SERIES number when ordering. Available materials: XP (general purpose laminate), XXXPFR (flame retardant), GME (glass cloth melamine), GEE (glass cloth epoxy). Printing: a. Marking strips are available in many printing styles. The maximum number of characters per station is two (). b. Please specify printing style. c. If unprinted marking strips are desired, insert the letter X in the printing style space of the ordering code. d. Printing is the standard method of marking. e. Printing color is silver (white) on dark surfaces and black on light surfaces. PROTECTIVE COATING: Marking and insulator strips can be supplied with a fungus proof varnish (MIL-V-7A) cover coating. State on order: coat after printing with MIL-V-7A varnish. *See block dimension for overall length and mounting Ordering Code Example MS/IS SERIES MAT. CODE FEED THRU NO. OF TERM PRINT STYLE (IF APPLICABLE) MS 60 XP Y 6 06A Contact Factory for Availability of Materials 07

109 Terminal Block Accessories Marking Strip Dimensions - Single Row Dimensions Series Style D F G K W X N* 4,, , 7, (799),, , 7, (899),, , 7, (9),, , 7, * N dimension to replace D dimension for insulator strips MM = Dim X 5.4 ** Consult factory on marking strips that are for terminal blocks with Z lugs. Accessories For overall lengths, reference appropriate terminal block series A & B dimensions. Single Row K TYP A REF. B D G REF. F Ø X TYP. STYLE &.0 D F REF. F D G REF. F STYLE 7 & 8.0 STYLE 4 & 5.0 STYLE STYLE W STYLE 4 STYLE 5 A B C D W STYLE 7 STYLE 8 A B E F E F C D 08

110 Accessories Marking Strip Dimensions - Double Row Dimensions Series Style C D F G K W X N* , 8, (800) , 8, (80) , 8, (80) , 8, , 8, , , , 8, , 8, , 8, * N dimension to replace D dimension for insulator strips ** Consult factory on marking strips that are for terminal blocks with Z lugs. For overall lengths, reference appropriate terminal block series A & B dimensions. Double Row MM = Dim X 5.4 Terminal Block Accessories K TYP. F A REF. B D F C G REF. D C G REF. C Ø X TYP. F STYLE THRU.0 D F REF. C F STYLE 4,5,& 6.0 D F REF. STYLE 8 & 9.0 STYLE 7.0 STYLE A B C D STYLE 4 A B C D STYLE W W STYLE 5 STYLE 6 STYLE STYLE 8 STYLE 7 E F E F STYLE 9 A B C D E F 09

111 Terminal Block Accessories Marking Styles MSA, MSB, MSC Front Surface of Marking Strip Accessories Back Surface of Marking Strip Marathon Offers a Complete Line of Military Marking Strips Requirements: Type Mount: Dimensions: Material: Marking: Bottom Only See Page 09 For Charts Type GME Marking Strips Shall Be Marked In Accordance With CID A-A-595 can be provided to MIL T5564 A single letter shall be inserted in the above type designation to specify the marking style (A, B or C). Both the front and the back of the marking strips shall be marked as indicated. The numbers shall be marked at a 45 ± angle with reference to the side of the marking strip, as indicated. Type MSC7TB (blank single sided marking strip) shall have the same dimensions as type MSA. 0

112 Accessories Terminal Block Printing Numeric Print Styles Terminal Block Accessories Alpha Print Styles

113 Sectional Terminal Blocks General Information: Sectionals are terminal blocks which are made up of individually molded units with electrically conductive members which, when assembled together, make up the block producing the required number of circuits. Marathon s DIN Sectional Blocks will fit on a standard 5mm DIN rail. Marathon offers three sizes of sectional terminal blocks: /8 centers, / centers and /6 sectional fuse holders. All blocks can be ordered with a channel mount base, or a flat mount base for direct mounting to the panel. The /8 is also available with a DIN foot. Sectional Terminal Blocks Ratings and Standards: The voltage ratings of terminal blocks are based upon the minimum spacing between electrically conductive parts line to line through air and over surface and line to ground through air and over surface. Class A Service equipment including deadfront switchboards, panel boards, service entrance devices. Class B Commercial appliances including business equipment, electronic data processing equipment and the like. Class C General industrial and machine tool controls which can be further defined as equipment falling under UL 508. Spacing Requirements*: Voltage Thru Air Over Surface Class A Class B Class C *In Inches Applications: Designed for electrical termination of wire where flexibility of circuit design is necessary. Accepts single or combination of wire sizes for tubular screw and tubular clamp styles.

114 Sectional Terminal Blocks /8 Sectional Volts Circuits Per Foot Channel (C), Flat (F) & (DIN) Mount Materials: UL Recognized File No. XCFR.E6806 CSA Certified File No. LR 9766 Wire termination torque 6 lb-in Tubular Screw Connector (6G8 TS) Sectional Terminal Blocks Base - Gray Thermoplastic, 5 C (RTI) Tubular Screw Connector- Copper, Tin Plated Screw - #0- Steel, Nickel Plated 50 Amps (40 Amps CSA) Wire Ranges: Single and Multiple Wire Combinations: Stranded CU Solid CU () #8-8 AWG () #0 - #6 AWG (-) # AWG (-) # AWG (-4) #4 (-4) #4 or #6 AWG Ordering Code: 6G8 TS F For flat mount block Std pk 00 See Figure On Page 6 6G8 TS C For channel mount block Std pk 00 See Figure On Page 6 6G8 TS DIN For DIN mount block Std pk 5 See Figure On Page 6

115 Kant Kut Connector (6G8 TSKK) Materials: Base - Gray Thermoplastic, 5 C (RTI) Kant Kut Connector- Copper, Tin Plated Screw - #0- Steel, Nickel Plated, Pad - Steel Sectional Terminal Blocks Wire Ranges: Single and Multiple Wire Combinations: Sectional Terminal Blocks Stranded CU Solid CU () #0 - AWG () #0 - #4 AWG (-) # AWG (-) # or #4 AWG (-) #4 AWG (-4) #6 AWG (-5) #8 or # AWG Ordering Code: WIRE PROTECTOR 6G8 TSKK F For flat mount block Std pk 00 See Figure On Page 6 6G8 TSKK C For channel mount block Std pk 00 See Figure On Page 6 6G8 TSKK DIN For DIN rail mount block Std pk 5 See Figure On Page 6 Strap Connector (6H8 S - Screw) Materials: White nylon, 05 C (RTI) Connector - Brass, Tin Plated Screw - #6- Binder Head, Phil-Slot, Brass Plated Water Absorption: 0.9% (Per ASTM D-570) (4 Hrs. % Wt. Gain) Wire Ranges: 0 Amps, () #4 - #6 AWG, Larger wire may be used with proper termination Ordering Code: 6H8 S F For flat mount block Std pk 00 See Figure 5 On Page 7 6H8 S C For channel mount block Std pk 00 See Figure 4 On Page 7 NOT AVAILABLE WITH A DIN MOUNTED BASE 4

116 Sectional Terminal Blocks Sems Pressure Connector (6H8 SP) Materials: White nylon, 05 C (RTI) Connector - Brass, Tin Plated Screw - #6- with Pad, Steel Nickel Plated Water Absorption: 0.9% (Per ASTM D-570) (4 Hrs. % Wt. Gain) Wire Ranges: 5 Amps; () # - # AWG Ordering Code: 6H8 SP F For flat mount block Std pk 00 See Figure 5 On Page 7 6H8 SP C For channel mount block Std pk 00 See Figure 4 On Page 7 NOT AVAILABLE WITH A DIN MOUNTED BASE Catalog # Description Std. Pack Qty. Sectional Terminal Blocks J 8 Jumper for TS & TSKK 50 MC Mounting Clamp (For channel style only) 5 MPC- ( ft channel) MPC-6 (6 ft channel) Channel MS MN5- Vinyl Marking Strip (/ x white) DIN Rail, 5 x 7.5 mm m long, slotted 5 5 MSK5 End bracket for DIN mount base 5 6G8 E C 6G8 E F 6G8 E DIN 6H8 E F 6H8 E C End sections for 6G8 versions 5 End sections for 6H8 versions 5 5

117 Sectional Terminal Blocks 6G8 TS & TSKK FIG - CHANNEL MOUNT A =.78 + (.75 X No. of Lines) [9.8] + [9.5 X No. of Lines) φ B =.6 + (.75 x No. of Lines) [9.] + [9.5 X No. of Lines) Sectional Terminal Blocks FIG - FLAT MOUNT TYP A =.78 + (.75 X No. of Lines) [9.8] + [9.5 X No. of Lines) φ B =.6 + (.75 x No. of Lines) [9.] + [9.5 X No. of Lines) TYP. A =. + (.75 X No. of Lines) [5.6] + [9.5 X No. of Lines) FIG - DIN MOUNT TYP A =.6 [5.7] + B

118 S S S S S S S S S S Sectional Terminal Blocks 6H8 FIG - 4 A B A =.79 + (.75 x E) B =.6 + (.75 x E) E = No. of Poles S S S S S.5 [.8].5 [.8] φ.8 [φ 4.6] Sectional Terminal Blocks 6H8 FIG - 5 A B. X.4 [5. X 8.6] A =.79 + (.75 x E) B =.6 + (.75 x E) E = No. of Poles S S S S S.5 [.7].7 [9.4].56 [9.7].5 [8.]. [0.7] 7

119 Sectional Terminal Blocks / Sectional Volts 4 Circuits Per Foot Sectional Terminal Blocks Base, White Nylon Type 6/6 05 C Water Absorption 0.9% (Per ASTM D-570) (4 Hrs. % Wt. Gain) Tubular Screw (TSCU) Copper, Tin Plated; Screw #/4-8 Steel, Nickel Plated, Wire Range #6-#4 AWG Copper, 70 Amps Torque 0 lb-in UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog # Description Std. Pack Qty. 6H-TSCU-F For flat mount block 6H-TSCU-C For channel mount block Tubular Screw 50 Tubular Screw 50 6H-E-F For flat mount block End Section 5 6H-E-C For channel mount block End Section 5 MC Metal Clamp 5 J- Jumper 50 MPC-6 6 Foot channel MPC- Foot channel Channel --- MS Vinyl Marking Strip 5 / X 8

120 Sectional Terminal Blocks / Sectional FLAT MOUNT A =.9 + (.500 x E) B =.7 + (.500 x E) C = No. of Poles Sectional Terminal Blocks CHANNEL MOUNT 9

121 /6 Sectional Fuse Holder 600 Volt 0 Amp Sectional Terminal Blocks Sectional Terminal Blocks Have Been Tested and Approved for 0,000 Amp Interrupting Capacity Base, Gray Nylon 5 C Connector Box Type Accepts up to #0 AWG Wire, either Terminated or Non-Terminated Clip, Copper Alloy, Tin Plated UL Recognized File No. IZLT.E5 CSA Certified File No. LR455 Std. Carton Wire Fuse Catalog # Description Qty. Range Size 6W0AF FLAT MOUNT 0 6W0AC CHANNEL MOUNT 0 6WE-F END PIECE--FLAT 0 #0-#4 / 6WE-C END PIECE--CHANNEL 0 AWG CU DIAMETER MC CHANNEL CLAMP 5 STRANDED BY / LONG MPC-6 6 FOOT CHANNEL --- MPC- FOOT CHANNEL --- GR- /8 DIA X LONG NYLON ROD --- Flat Mount L = (0.68 x N) C = (0.68 x N) N = No. of Poles Channel Dimensions LCH = L +.5 0

122 DIN Rail Terminal Blocks General Information: Marathon DIN Rail Terminal Blocks are ideal for various applications such as machine tool controls, distribution and instrumentation installations, switchgear, elevator and panelboard construction. Insulating Materials: The moldings are made of Polyamide 6.6. This material has high creepage resistance and high impact strength. It also has a UL 94V- flammability rating and is resistant to gasoline, oil, alcohol and many other chemicals. Temperature Rating: 00 C / F Continuous 70 C / 8 F Intermittent & Short Exposure Connector System: The connectors are made of copper alloy and are nickel-plated for corrosion resistance. The screws are rolled steel, zinc plated. The total connector system provides the following benefits:. The system ensures that no matter how small the cross section of the wire it can only be inserted into the connection hole.. A serrated pressure plate eliminates any wire damage from the torquing of the screw.. The upward pressure on the screw from the pressure plate reduces the risk of a screw loosening due to vibration. 4. The pressure plate also compensates for some reduction in contact pressure caused by cold flow in the wire. 5. The design of the pressure plate and its heavy construction eliminates tilting, even with solid wires. 6. The use of rolled rather than turned screw threads provide for the application of higher torque without thread damage. Reference Chart: Catalog Number Page Amps Volts Wire Range Thickness Terminals per Foot Wire Termination Torque MIK #-#AWG 5 mm 60 5 MIK #-#0AWG 6 mm 50. MIK #-#8AWG 8 mm 8. MIK #-#6AWG 0 mm 0 8 MIK #8-#4AWG mm 5 5 MIKTS #-#AWG 6 mm - - MIKSI #0-#0AWG 8 mm - - MIKE #-#0AWG 7 mm MIKE #8AWG 8 mm -. MIKE #6AWG 0 mm - 8 Contact Factory For Identification Labels MSK5 - End Bracket securing torque 7-9 lb-in (.8- N-m) DIN Rail Terminal Blocks

123 DIN Rail Terminal Blocks MIK 5 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #-# AWG 0 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR Amps VDE 6 Amps DIN Rail Terminal Blocks Catalog # Description MIK Center Section MN5- DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated MVB- Jumper -position MVB- Jumper -position MVL- Connecting straps for linking together two adjacent pole jumpers MIW Insulating end sections for covering and insulating the last terminal in an assembly MIW4 Insulating partition walls for visual and electrical separation of terminal groups MKAW Safety cover with warning label for line terminals which cannot be disconnected MSK5 End bracket used on both ends of the assembly to hold blocks in place Wire strip length /4 Dimensions: H = 6 mm (.47") W = 4 mm (.65") T = 5 mm (.97")

124 DIN Rail Terminal Blocks MIK5 6 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #-#0 AWG 0 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR Amps VDE 4 Amps Catalog # Description MIK5 Center Section MN5- DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated MVB4- Jumper -position MVB4- Jumper -position MVL4- Connecting straps for linking together two adjacent pole jumpers MSTB Plug Sockets- test plugs of. mm MPST Test Plugs-. mm MIW4 Insulating end sections for covering and insulating the last terminal MIW6 Insulating partition walls for visual and electrical separation of terminal groups MKAW4 Safety cover with warning label for line terminals which cannot be disconnected MSK5 End bracket used on both ends of the assembly to hold blocks in place Wire strip length.0 DIN Rail Terminal Blocks Dimensions: H = 8 mm (.496") W = 4 mm (.65") T = 6 mm (.6")

125 DIN Rail Terminal Blocks MIK0 8 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #-#8 AWG 50 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR Amps VDE 6 Amps DIN Rail Terminal Blocks Catalog # MIK0 MN5- MVB6- MVB6- MVL6- MSTB MPST MIW6 MIW50 MKAW0 MSK5 Description Center Section DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated Jumper -position Jumper -position Connecting straps for linking together two adjacent pole jumpers Plug Sockets- test plugs of. mm Test Plugs-. mm Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety cover with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 44 mm (.7") W = 4 mm (.65") T = 8 mm (.5") 4

126 DIN Rail Terminal Blocks MIK6 0 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #-#6 AWG 65 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR Amps VDE 8 Amps Catalog # MIK6 MN5- MVB6- MVB6- MVBL6 MVL6- MIW6 MIW50 MKAW6 MSK5 Description Center Section DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated Jumper -position Jumper -position Removable connecting jumpers for the connection of adjacent lines Connecting straps for linking together two adjacent pole jumpers Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety covers with warning label for line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place DIN Rail Terminal Blocks Dimensions: H = 44 mm (.7") W = 4 mm (.65") T = 0 mm (.94") 5

127 DIN Rail Terminal Blocks MIK5 mm 600 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #8-#4 AWG 85 Amps UL Recognized File No. XCFR.E6806 CSA Certified File No. LR Amps VDE 08 Amps DIN Rail Terminal Blocks Catalog # MIK5 MN5- MVB5 MVL5 MVL5- MVBU5 MSTB5 MPST4 MIW50 MIW70 MKAW5 MSK5 Description Center Section DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated Jumpers -position Connecting straps- position Connecting straps- position Supports for use under the MVL straps using M 6 X 5 screws Plug sockets for test plugs of 4 mm Test plugs- 4 mm Insulating end sections for covering and insulating the last terminal in an assembly Insulating partition walls for visual and electrical separation of terminal groups Safety covers with warning label for supply line terminals which cannot be disconnected End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 48 mm (.89") W = 50 mm (.97") T = mm (.47") 6

128 DIN Rail Terminal Blocks MIKTS4 (Disconnect) 6 mm 00 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #-# AWG 0 Amps CSA Certified File No. LR70090 VDE 6 Amps Catalog # MIKTS4 MN5- MDSBL (Plug only) MDSRT (Plug only) MPST MIW4 MSK5 Description Center Section DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated Diode plug- blue with diode 400 Volt, Amp cathode on high voltage side Diode plug- red with diode 400 Volt, Amp cathode on low voltage side Test Plug-. mm Insulating end sections for covering and insulating the last terminal in an assembly End bracket used on both ends of the assembly to hold blocks in place DIN Rail Terminal Blocks Dimensions: H = 9 mm (.55") H = 46 mm (.800") H = 5 mm (.00") W = 4 mm (.65") T = 6 mm (.6") 7

129 DIN Rail Terminal Blocks MIKSI5 8 mm 00 Volts Insulating Material, Polyamide 6.6, Gray Wire Range #0-#0 AWG 0 Amps VDE - 4mm IEC - 6. Amps UL Recognized 0 Amps Fuse Type - 5 x 0 mm, 5 x 5 mm Catalog # MIKSI5 MN5- MIW50 MSK5 Description Center Section DIN Rail symmetrical 5 X 7.5 mm slotted m long/ steel zinc-plated Insulating partition walls for visual and electrical separation of terminal groups End bracket used on both ends of the assembly to hold blocks in place Dimensions: H = 47 mm (.850") W = 60 mm (.6") T = 8 mm (.5") DIN Rail Terminal Blocks MIKE4, MIKE0, MIKE6 7 mm, 8 mm, 0 mm Insulating Material, Polyamide 6.6, Green/Yellow Wire Range MIKE4 - #-#0 AWG MIKE0 - #8 AWG MIKE6 - #6 AWG UL Recognized File No. XCFR.E6806 CSA Certified File No. LR70090 VDE Dimensions: H = MIKE4 8 mm (.496") MIKE0 44 mm (.77") MIKE6 44 mm (.7") W = 56 mm (.04") T = MIKE4 7 mm (.75") MIKE0 8 mm (.5") MIKE6 0 mm (.94") 8

130 DIN Rail Terminal Blocks Universal Identification Labels Type MSH Strips of ten Large surface area Available: plain, with numbers, letters or symbols Can be labeled vertically or horizontally Single label MSH 5 can be used for all sizes Ordering Code for MSH MSH 5 P B H -0 LABELS BLOCK SIZE 5 = 5 mm (FITS ALL SIZES) 6 = 6 mm (FITS 6mm & Larger) 8 = 8 mm (FITS 8-0 mm) 0 = 0 mm PRINTED/UNPRINTED P = PRINTED U = UNPRINTED SPECIFY PRINTING ORIENTATION H = HORIZONTAL V = VERTICAL TYPE OF PRINTING A = EACH STRIP PRINTED IDENTICAL (Example: All T ) B = EACH STRIP PRINTED IN SEQUENCE (Example: -0) C = CUSTOM Universal Identification Labels Type MSK /0 MSK /0 Applicator Identification with up to 4 or 6 digits Star shaped applicator for easy insertion of labels into holder MSKT 5/4 holder fits all sizes - 4 digits MSKT 5/6 holder fits all sizes - 6 digits Each Wheel comes with 0 identical numbers or letters Ordering Code for MSK /0 MSK /0 P 9 WHEEL LABEL FITS ALL SIZES P = PRINTED SPECIFY PRINTING MSKT 5/4 Holder MSKT 5/6 Holder DIN Rail Terminal Blocks Pens/Screwdrivers MP PL SD SD4 SD6 SPECIAL WATER-PROOF MARKER BARRIER REMOVAL TOOL SCREWDRIVER.5 X 00 mm FOR MIK & MIK5 SCREWDRIVER 4.0 X 00 mm FOR MIK0 SCREWDRIVER 5.5 X 00 mm FOR MIK6 & MIK5 9

131 Kulka Military Class (A-A-595)/(MIL-T-5564) Military Class: Closed Back These military blocks feature molded-in terminals in an improved Kulka design for greater strength and flexibility. The mounting holes are covered with molded-in reinforcement straddle plates. A-A-595/ MIL-T-5564 Terminal Type Voltage Current Wire & Lug Information Information Class Spec # Description Max Dielectric Max Screw RECMD Max MS74 Max Lug RECMD Torque Rated with Test Rated Size Wire Size Lug # Width Lb-In (N-M) 7 TB / Double Screw 00 V 000 V 5 Amp #6 #6 AWG - RMS RMS 60 Hz [7.] [0.9-.] 8 TB / Double Screw 600 V 400 V 0 Amp #6 #4 AWG -4 RMS RMS 60 Hz [7.9] [0.9-.] 9 TB / Double Screw 600 V 4000 V 0 Amp #8 #0 AWG -9 RMS RMS 60 Hz [0.4] [.-.4] 40 TB / 4 Single Screw 00 V 000 V 7.5 Amp #6 #8 AWG -0 Feed Thru RMS RMS 60 Hz [7.] [0.9-.] 4 TB / 5 Single Screw 600 V 400 V 0 Amp #6 #6 AWG -4 Feed Thru RMS RMS 60 Hz [7.9] [0.9-.] 4 TB / 6 Single Screw 600 V 4000 V 5 Amp #8 #4 AWG -8 Feed Thru RMS RMS 60 Hz [0.4] [.-.4] 4 TB / 6 Double Screw 50 V 000 V 5 Amp # # AWG RMS RMS 60 Hz [4.7] [0.-0.5] 44 TB / 7 Single Screw 50 V 000 V 5 Amp # # AWG RMS RMS 60 Hz [4.7] [0.-0.5] Military/Navy Class Terminal Blocks 0

132 Kulka Military Class (A-A-595)/(MIL-T-5564) 7TB-B/40TB-B Series 00 Volts Base, GPT-0F, Grey Color, 0 C Closed Back Design Screws, Brass Nickel Plate, 6- Binder Head, Slotted Terminals, Brass Nickel Plate, Ultrasonically Inserted -0 Poles, Consult Factory for Longer Lengths /8 Centers Flammability Rating 94 V-O Wire Size #6 5 Amps Parts are supplied with end plates Catalog Number Dimensions Catalog Number Dimensions Number of Poles A B Number of Poles A B 7TB0B.4. 7TBB TB0B TBB TB04B TB4B TB05B TB5B TB06B TB6B TB07B TB7B TB08B TB8B TB09B TB9B TB0B TB0B TBB Hardware Options: Feed-Thru Hardware Options: Service Options: Lug Types (Commercial): Long Feed-Thru Solder Consult Factory /4 ST 600 = Half Solder 40TB B Only ST600 = Full Solder Accessories: (Jumper Commercial Grade) Marking Strips = MSA, MSB, MSC Jumper = J600, 600RJ, 600RJ(S) Military/Navy Class Terminal Blocks

133 7TB-Military Class (A-A-595/)/(MIL-T-5564/) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: Brass per QQ-B-6, nickel plated per QQ-N-90 Electrical Rating: Rated voltage (maximum): 00 volts Current rating: 5 Amps D.W.V.: 000 volts RMS Military Type Number Dimensions Designation of poles A B 7TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F MM=Dim X 5.4 Military/Navy Class Terminal Blocks 8TB-Military Class (A-A-595/)/(MIL-T-5564/) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: Brass per QQ-B-6, nickel plated per QQ-N-90 Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 0 Amps D.W.V.: 400 volts RMS Military Type Number Dimensions Designation of poles A B 8TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F TB F TB F MM=Dim X 5.4

134 9TB-Military Class (A-A-595/)/(MIL-T-5564/) Molded Material: Plastic: Grade F temperature rating 55 C per MIL-M-4 Screws: Brass per QQ-W-, nickel plated per QQ-N-90 Terminal Plates: Brass per QQ-B-6, nickel plated per QQ-N-90 Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 0 Amps D.W.V.: 4000 volts RMS Military Type Number Dimensions Designation of poles A B 9TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F MM=Dim X TB-Military Class (A-A-595/4)/(MIL-T-5564/4) Molded Material: Same as 7 TB Class Hardware: Lug, Brass per QQ-B-6, tin plated Electrical Rating: Rated voltage (maximum): 00 volts Current rating: 7.5 Amps D.W.V.: 000 volts RMS Military Type Number Dimensions Designation of poles A B 40TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F MM=Dim X 5.4 Military/Navy Class Terminal Blocks

135 4TB-Military Class (A-A-595/5)/(MIL-T-5564/5).6 [4.0]. [8.4] FEED THRU SOLDER LUG A B.44 [.] Molded Material: #6- UNC-A x.5[6.] BD HD SCREW ø.0 [ø5.0].4 [0.7].8 [0.8].56 [4.].9 [9.9]. [8.6].6 [5.9] Same as 8 TB Class Hardware: Lug, Brass per QQ-B-6, tin plated Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 0 Amps D.W.V.: 400 volts RMS Military Type Number Dimensions Designation of poles A B 4TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F TB 9 F TB 0 F TB F TB F TB F MM=Dim X 5.4 Military/Navy Class Terminal Blocks 4TB-Military Class (A-A-595/6)/(MIL-T-5564/6) Molded Material: Same as 9 TB Class Hardware: Lug, Brass per QQ-B-6, tin plated Electrical Rating: Rated voltage (maximum): 600 volts Current rating: 5 Amps D.W.V.: 400 volts RMS 4 Military Type Number Dimensions Designation of poles A B 4TB 0 F TB 0 F TB 04 F TB 05 F TB 06 F TB 07 F TB 08 F TB 09 F TB 0 F TB F TB F TB F TB 4 F TB 5 F TB 6 F TB 7 F TB 8 F MM=Dim X 5.4

136 Kulka Military Class (A-A-595)/(MIL-T-5564) (Solder Hardware Dimensions are not to Mil Spec) 7TBLD (Commercial Equivalent). [.0].8 [7.].6 [4.].75 [9.].69 [7.5].06 [.6]. [.0].6 [4.0] Ø.09 [.].0 [.76]. Ø.44 [7.9] [.6] ( HOLES) ( HOLES) 7TBLS (Commercial Equivalent).45 [].8 [7.]. [5.9].6 [4.0].6.06 [4.] [.6].9 []. [7.9] Ø.44 -HOLES [.6] Ø.09 HOLE [.].0 [0.8] This is an assembly of the 7TB Class Terminal Board and a two-sided terminal lug (ST600). Available in lengths from terminals through terminals. Lugs are brass and are tin plated. This is an assembly of the 7TB Class Terminal Board and a one-sided terminal lug (/4 ST600). Available in lengths from terminals through terminals. Lugs are brass and are tin plated. 8TBLD (Commercial Equivalent) 8TBLS (Commercial Equivalent).58 [40.].. [7.9] [5.6].58 [40.].94 [.8].84 [.4].06.4 [.6] []. [5.6].06 [.9] Ø. -HOLES [.] Ø.5 -HOLES [.8].58 [5].7 [9.7]..4 [8.] []. [5.6].06 [.9] Ø.5 -HOLES...06 [.8] [7.9] [5.6] [.6] Ø. -HOLES [.] This is an assembly of the 8TB Class Terminal Board and a two-sided terminal lug (ST60). Available in lengths from terminals through terminals. Lugs are brass and are tin plated. This is an assembly of the 8TB Class Terminal Board and a one-sided terminal lug (/4 ST60). Available in lengths from terminals through terminals. Lugs are brass and are tin plated. 9TBLD (Commercial Equivalent) 9TBLS (Commercial Equivalent).85 [47.0].4 [0].8 [7.].09 [.4] [].85 [47.0].06 [6.9].94 [.9] This is an assembly of the 9TB Class Terminal Board and a two-sided terminal lug (ST60). Available in lengths from terminals through 8 terminals. Lugs are brass and are tin plated [7.].07 [0.9] Ø. -HOLES [.] Ø.77 -HOLES [4.5] 5.69 [8].4 [0] [9.9] [7.].8 [7.].7 [4.8] [] This is an assembly of the 9TB Class Terminal Board and a one-sided terminal lug (/4 ST60). Available in lengths from terminals through 8 terminals. Lugs are brass and are tin plated [.4] [0.9] Ø.77 -HOLES [4.5] Ø. HOLE [.] Military/Navy Class Terminal Blocks

137 Kulka Navy Class (A-A-595)/(MIL-T-5564) Military/Navy Class Terminal Blocks A-A-595/ MIL-T-5564 Terminal Type Voltage Current Wire & Lug Information Information Class Spec # Description Max Dielectric Max Screw RECMD Max MS74 Max Lug RECMD Torque Rated with Test Rated Size Wire Size Lug # Width Lb-In (N-M) TB / 9 Single Stud 600 V 000 V 45 Amp #8 #0 AWG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] 4 TB / 0 Single Stud 600 V 00 V 40 Amp #8 # AWG - Double Row RMS RMS 60 Hz [0.0] [.8-.0] 5 TB / Feed Thru Stud 600 V 00 V 50 Amp #8 #0 AWG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] 6 TB / Single Stud 600 V 00 V 0 Amp #6 #4 AWG -5 Double Row RMS RMS 60 Hz [7.8] [.-.4] 7 TB / Feed Thru Stud 600 V 00 V 40 Amp #6 # AWG -6 Single Row RMS RMS 60 Hz [7.8] [.-.4] 8 TB Double Stud 00 V 500 V 0 Amp / 4 #5 #4 AWG - 8 TBHT Double Row RMS RMS 60 Hz [7.] [0.9-.] 9 TB / 5 Single Stud 00 V 500 V 5 Amp #6 # AWG Single Row RMS RMS 60 Hz [7.8] [.-.4] 0 TB / 6 Single Stud 600 V 00 V 0 Amp #6 #4 AWG Double Row RMS RMS 60 Hz [6.] [.-.4] TB / 7 Feed Thru Stud 600 V 00 V 40 Amp #6 # AWG -5 Single Row RMS RMS 60 Hz [6.] [.-.4] 5 TB / 9 Single Stud 600 V 00 V 0 Amp #8 #4 AWG -8 Double Row RMS RMS 60 Hz [7.8] [.8-.0] 6 TB / 0 Single Stud 000 V 000 V 40 Amp #8 # AWG - Double Row RMS RMS 60 Hz [0.0] [.8-.0] 7 TB / Double Stud 600 V 00 V 40 Amp #6 # AWG - Double Row RMS RMS 60 Hz [0.0] [.-.4] 8 TB / Single Stud 600 V 00 V 45 Amp #8 #0 AWG - Single Row RMS RMS 60 Hz [0.0] [.8-.0] 5 TB Single Stud 00 V 500 V 5 Amp / #4 #4 AWG -7 5 TBHT Single Row RMS RMS 60 Hz [6.] [ ] 6 TB Double Stud 00 V 500 V 0 Amp / 4 #4 #6 AWG -0 6 TBHT Double Row RMS RMS 60 Hz [6.] [ ] Notes: Molded materials is MAI-60 in accordance with MIL-M-4. The stud connector for these terminal boards is considered part of the stud and is required, unless otherwise specified. With the stud connector removed, the terminal board will provide twice the number of connection points and allow for an additional wire per terminal. Nuts and connectors are unplated brass and shipped unassembled. 6

138 Kulka Navy Class (A-A-595)/(MIL-T-5564) TB (A-A-595/9)/(MIL-T-5564/9) 4TB (A-A-595/0)/(MIL-T-5564/0) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 4 TB 08F TB 0F MM = Dim X 5.4 5TB (A-A-595/)/(MIL-T-5564/) Single Row, Through Connection Number of Type Terminals Dim. A Dim. B Nuts 5 TB 08F TB 0F MM = Dim X 5.4 6TB (A-A-595/)/(MIL-T-5564/) 7 Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 6 TB 06F TB 0F TB 4F MM = Dim X 5.4 Military/Navy Class Terminal Blocks

139 7TB (A-A-595/)/(MIL-T-5564/) Kulka Navy Class (A-A-595)/(MIL-T-5564) 8TB (A-A-595/4)/(MIL-T-5564/4) Double Row, Linked Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 8 TB 0F TB 06F TB 08F TB 0F MM = Dim X 5.4 9TB (A-A-595/5)/(MIL-T-5564/5) Single Row, Front Connection Number of Type Terminals Dim. A Nuts 9 TB 0F.48 9 TB 04F MM = Dim X 5.4 0TB (A-A-595/6)/(MIL-T-5564/6) Military/Navy Class Terminal Blocks TB (A-A-595/7)/(MIL-T-5564/7) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Dim. C Nuts 0 TB 8F TB 8F Single Row, Through Connection Number of Type Terminals Dim. A Dim. B Dim. C Nuts TB 04F TB 06F TB 4F MM = Dim X MM = Dim X 5.4

140 Kulka Navy Class (A-A-595)/(MIL-T-5564) 5TB (A-A-595/9)/(MIL-T-5564/9) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 5 TB 0F TB 4F MM = Dim X 5.4 6TB (A-A-595/0)/(MIL-T-5564/0) Double Row, Front Connection Number of Type Terminals Dim. A Dim. B Nuts 6 TB 04F TB 0F MM = Dim X 5.4 7TB (A-A-595/)/(MIL-T-5564/) Double Row, Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 7 TB 0F MM = Dim X 5.4 5TB (A-A-595/)/(MIL-T-5564/) 6TB (A-A-595/4)/(MIL-T-5564/4) 9 Single Row, Front Connection Type Number of Terminals Dim. A Dim. B Nuts 5 TB 0F TB 05F TB 06F TB 07F TB 09F TB 0F TB F MM = Dim X 5.4 Double Row, Linked Front Connection Number of Terminals Type w/stud w/o stud Dim. A Dim. B Nuts connectors connectors 6 TB 06F TB 08F TB 0F TB F MM = Dim X 5.4 Military/Navy Class Terminal Blocks

141 Studded Power Feed Thru Terminal Blocks Stud Feed Thru ST7 Family These terminal blocks were designed for applications where power feed thru is necessary using standard double hole lugs with.65" spacing. These terminal blocks are available in three mounting options (end mount, back mount, and slide-in mount) and are offered in various line lengths. These terminal blocks lower cost by eliminating multiple components and assembly time. The terminal blocks are manufactured from top quality insulator and conductor materials. They are designed with a robust one-piece insulator base using a one-piece conductor permanently assembled together. Offered with various hardware options (See Description Below). Covers are molded using a one-piece design and are available as an option for all series of terminal blocks. Optional Cover Available: - Cover is offered in 6 poles - One cover accommodates all series - Base, Thermoplastic - Flammability UL 94 V-0 Catalog Number Dimensions A Number of Poles Inches Metric C (.) C70.64 (4.66) C70.7 (60.0) C (78.74) C (97.8) C (5.8) Series Mounting Stud (Thread Size) Poles Hardware ST7 B 5 0 B Back Mount 9 - #0- Stud (Back Mount) 0 06 (blank) No hardware S Slide Mount 5 - /4-0 Stud (Slide Mount) 0 04 UH All nuts shipped bulk E End Mount M5 - M5 Stud (End Mount) 0 06 AH All nuts assembled M6 - M6 Stud DL Assembled barrier side, remainder shipped bulk 40

142 Studded Power Feed Thru Terminal Blocks ST7B Series (back mount) Stud Feed Thru Electrical: 00 Volts (UL 059 Class B and C) 75 Amps Wire Range #/0 - #8 (Accommodates Two Hole Compression Lugs on.65" Centers wires # and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 5 C (UL RTI) Studs, Brass, Nickel Plated 6 Poles.7" Centers Application Torque: 5 lbf-in for #0 - and M5. 50 lbf-in for /4-0 and M6 The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog Number Dimensions A Number of Poles Inches Metric ST7BXX0.55 (9.7) ST7BXX0.8 (57.9) ST7BXX (75.45) ST7BXX (95.00) ST7BXX (.54) Replace XX with thread size on page 40. "A" BLIND HOLE FOR #6 THREAD CUTTING SCREW THD. X.4 TYP. BOTH ENDS ((4) #6 THREAD CUTTING SCREW PROVIDED)

143 Studded Power Feed Thru Terminal Blocks Stud Feed Thru ST7S Series (slide-in mount) Electrical: 00 Volts (UL 059 Class B and C) 75 Amps Wire Range #/0 - #8 (Accommodates Two Hole Compression Lugs on.65" Centers wires # and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 5 C (UL RTI) Studs, Brass, Nickel Plated 4 Poles.7" Centers Application Torque: 5 lbf-in for #0 - and M5. 50 lbf-in for /4-0 and M6 The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog # Number Dimensions A of Poles Inches Metric ST7SXX0 0.8 (0.8) ST7SXX0.55 (9.7) ST7SXX0.8 (57.9) ST7SXX (76.45) Replace XX with thread size on page 40. "A" THD. X.4 TYP. BOTH ENDS

144 Studded Power Feed Thru Terminal Blocks ST7E Series (end mount) Stud Feed Thru Electrical: 00 Volts (UL 059 Class B and C) 75 Amps Wire Range #/0 - #8 (Accommodates Two Hole Compression Lugs on.65" Centers wires # and larger may require narrow lugs) General/Mechanical: Base, Thermoplastic, 5 C (UL RTI) Studs, Brass, Nickel Plated 6 Poles.7" Centers Application Torque: 5 lbf-in for #0 - and M5. 50 lbf-in for /4-0 and M6 The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR.E6806 CSA Certified File No. LR9766 Catalog Number Dimensions A Dimensions B Number of Poles Inches Metric Inches Metric ST7EXX0.77 (44.96). (.5) ST7EXX0.50 (6.50).05 (5.07) ST7EXX0. (8.40).78 (70.6) ST7EXX (00.58).5 (89.5) ST7EXX (9.) 4.4 (07.70) ST7EXX (7.67) 4.97 (6.4) Replace XX with thread size on page 40. "B" "A" φ THD. X.4 TYP. BOTH ENDS

145 Studded Power Feed Thru Terminal Blocks Stud Feed Thru ST75S90 Electrical: 00 Volts (UL 059 Class B and C) 80 Amps Wire Range #6 - #4 (Accommodates Two Hole Compression Lugs on.65" Centers) General/Mechanical: Base, Thermoplastic, 5 C (UL RTI) Studs, Brass, Nickel Plated Poles.56" Centers Application Torque 5 lbf-in The Suitability of These Devices for Greater Currents Shall Be Determined in the End-Use Application UL Recognized File No. XCFR.E6806 cur Certified File No. XCFR8.E #0- TBD 8X C750 (Cover)..9 φ.096 X.9 DP [.4 X 4.8] FOR #4 SCREW MARATHON Æ SPECIAL PRODUCTS MAX (() #4 THREAD CUTTING SCREW PROVIDED) 44

146 Studded Power Feed Thru Terminal Block ST7B8 Series (Back Mount) Mechanical: Base, Thermoplastic, 5 C (UL RTI) Flammability, UL 94 V-O Studs, /8-6 Brass, Nickel Plated Mounting hardware included (4) #0- screws Lug termination hardware not included Application Torque 9 lb-in. UL Recognized File No. XCFR.E6806 cur Certified File No. XCFR8.E6806 Ordering Code: ST7B80 - one pole ST7B80 - two poles Contact Factory for -Pole Drawing Electrical: 600 Volts (UL 059 Class B and C) 80 Amps Wire Range #500 kcmil - #/0 AWG (Accommodates Two Hole Compression Lugs on " Centers wires larger than 50 kcmil require narrow lugs) φ.8 TYP. 0.6 /8-6 X.86" LG. TH'D BOTH ENDS.9 0. φ.55 TYP..9 X.4 [0.9] DP. FOR #0 SCREW Stud Feed Thru φ.0 X.45 DP..6 Single Stud Connection Block Base, Thermoplastic Temperature rating of 5 C (UL RTI) Hardware, Stainless Steel 00V Recommended Mounting Screw /4 Available with two stud sizes: 5/6 or /8 Designed for two or more wire lugs 5/6 Stud /8 Stud Catalog# ST 70 Catalog# ST

147 Catalog Page No. No RZ Series 6 MS Series TBF Series 7 4TBF Series 7 5TBF Series 7 6CC0A Series 7 6F0A Series 0 6F60A Series 0 6F00A Series 0 6F600A Series 0 6G8 Series - 6 6H8 Series 4-7 6H Series 8-9 6J0A Series 6J60A Series R6J00A Series 6J00A Series 6J400A Series 6J600A Series 6M0A Series 4 6R0A Series 4 6R60A Series 4 6R00A Series 4 6R00A Series 4 6R400A Series 4 6R600A Series 4 6SC0A Series 8 6SM0A Series 5 6TBF Series 7 6T0A 9 6T00A 9 6T00A 9 6T400A 9 6T600A 9 6W0A Series 6, 0 7TBF Series 8 8TBF Series 8 9TBF Series 8 0TBF Series 8 TBF Series 8 5TBF Series 9 6TBF Series 9 7TBF Series 9 5TBF Series 9 6TBF Series 9 7TBB Series 7TBF Series 7TBLD 5 7TBLS 5 8TBF Series 8TBLD 5 8TBLS 5 9TBF Series Catalog Page No. No. 9TBLD 5 9TBLS 5 40TBB Series 40TBF Series 4TBF Series 4 4TBF Series 4 00 Series 79 X 49 X4 49 X474 5 X X57 47 X574 5 X X X97 48 X6 47 X70 5 X7 5 X7 5 X7 5 X80 5 X8 5 X05 47 X0 47 X60 47 X55 44 X X X558 5 X559 5 X56 49 X X X X X X X X X X X95 46 X X X X X X X X0 50 4X0 50 4X Index Catalog Page No. No. 4X X X0 50 4X X X 48 4X 49 4X 49 4X4 50 4X X X X X X X 47 4X4 48 4X6 47 4X X X X X X X X X X X 49 44X X X X X X X X X X X X X X X X X X X X X X X X986 46

148 Index Catalog Page No. No. 45X Series 80 00HB Series 8 00 Series Series 8 40 GP Series 84 4 Series Series GP Series A GP Series A GP Series GP Series GP Series GP Series GP Series RZ Series Series (Fanning Strips) Series (Fanning Strips) 0 65 Series (Fanning Strips) 0 65 Series (Fanning Strips) Series A GP Series A RZ Series 9 67 GP Series RZ Series GP Series 8 67 RZ Series Series A Series Series Series 88 8 Series Catalog Page No. No. 899 Series 7 9 Series Series Series 6 0P 6 00 Series Series Series Series Series Series Series DIN Rail Adapter 9 Flex Wire 5-6 Fuse Cover/Puller 7-8 Fuse Holder with BD 5 F0A Series 9 F60A Series 9 F00A Series 9 F600A Series 9 FPB Series 4-4 FPB Series 4-4 G5A Series 9 G0A Series 9 G0A Series 9 Grounding Lugs 55 IEC Power Blocks (EPB Series) 5 J-JS Jumpers (LL) 0 KT Series Marking Strips & Covers 04 - MIK MIK5 MIK0 4 MIK6 5 MIK5 6 MIKE4 8 MIKE0 8 MIKE6 8 MIKSI5 8 MIKTS4 7 Power Block Covers 54 R0A Series R60A Series R00A Series R00A Series R400A Series R600A Series R6CC60 Series 7 R6F0A Series 0 R6F60A Series 0 R6F00A Series 0 R6F400A Series 0 R6J0A Series 47 Catalog Page No. No. R6J60A Series R6T0A Series 9 R6T60A Series 9 RF0A Series 9 RF60A Series 9 RF00A Series 9 RF400A Series 9 RG5A Series 9 RG0A Series 9 RG0A Series 9 RH Series - RJ, RJS Jumpers 0 RT0A Series 8 RT60A Series 8 SCCR 40 SPB (Straddle Plate) 0 ST, /4 ST 99 ST4 4 ST8 4 ST70 Series 45 ST75S90 44 ST7B80 45 ST7B 4 ST7E 4 ST7S 4 STSF 6 T0A Series 8 T60A Series 8 T00A Series 8 T00A Series 8 T400A Series 8 T600A Series 8 Wire Clamp 0 Y, YSY, Z 00

149 ALL QUOTATIONS ARE MADE AND ALL ORDERS ARE ACCEPTED BY MARATHON SPECIAL PRODUCTS CORPORATION SUBJECT ONLY TO THESE TERMS AND CONDITIONS.. MODIFICATIONS OF SALES TERMS Any Terms and Conditions contained in any purchase order or other form of communication from Marathon s customers which are additional or different from these Terms and Conditions shall be deemed rejected by Marathon unless expressly accepted in writing by Marathon. In general, no modification, amendment, waiver or other change of any of these Terms and Conditions and those contained on the reverse side hereof and/or in attachments hereto ("Terms and Conditions"), or of any of Marathon s rights or remedies thereunder, shall be binding on Marathon unless expressly accepted in writing by Marathon s authorized officers at Marathon s home office. No course of dealing, usage of trade or course of performance shall be relevant to explain or supplement any of these Terms and Conditions. In cases of conflict between the Terms and Conditions printed on this page and those contained on the face side or in attachment hereto, the latter shall control. If any document issued by any party hereto is sent by facsimile or another form of electronic document transmission, the parties hereto agree that (a) the copy of any such document printed on the facsimile machine or printer of the recipient thereof is a counterpart original copy thereof and is a "writing", (b) delivery of any such other form of electronic document to the recipient thereof by facsimile or such other form of electronic document transmission is authorized by the recipient thereof and is legally sufficient for all purposes as if delivered by United States mail, (c) the typewritten name of an authorized agent of the party sending such document on any such document is sufficient as a signature thereon and behalf of such party and the intent of such signature is to authenticate the writing, and (d) an electronically stored and reproduced copy of any such document shall be deemed to be legally sufficient evidence of the terms of such document for all purposes.. ACCEPTANCE OF ORDERS Acceptance by Marathon of Buyer s purchase order(s) is expressly conditioned upon Buyer s assent to these Terms and Conditions. Buyer will be deemed to have assented to such Terms and Conditions unless Marathon receives written notice of any objection within fifteen (5) days after Buyer s receipt of this form and in all events prior to any delivery or other performance by Marathon of Buyer s order.. QUOTATIONS Quotations by Marathon shall be deemed to be offers by Marathon to sell the equipment described therein subject to these Terms and Conditions, and acceptance of such offers is expressly limited to acceptance by Buyer of all of these Terms and Conditions within thirty (0) days from the date of the quotation. Purchase orders submitted by Buyer for the equipment quoted by Marathon shall be subject to and will be deemed to constitute acceptance of these Terms and Conditions. All purchase orders will be subject to approval by Marathon at Marathon s home office. 4. PRICES: PRICE CHANGES All prices are net F.O.B. shipping point and are subject to change without notice. In the event of a change in Marathon s prices, the price for equipment unshipped will be the price in effect on the date of shipment. If Marathon s quoted price was based on delivery to and acceptance by Buyer of a specified quantity of equipment, such price shall be subject to adjustment if Buyer does not accept the quantity at the times specified in Marathon s quotation, and Buyer will be invoiced at Marathon s standard price without quantity discounts, if any, for the quantity of equipment actually accepted by Buyer. 5. TAXES In addition to any prices, Buyer shall pay the amount of any present or future manufacturer s tax, retailer s occupation tax, use tax, sales tax, excise tax, duty, custom, inspections or testing fee, or any other tax, fee or charge of any nature whatsoever imposed by any government authority, on or measured by the transaction between Marathon and Buyer. In the event Marathon is required to pay any such tax, fee or charge, Buyer shall reimburse Marathon therefor, or, in lieu of such payment, Buyer shall provide Marathon at the time the order is submitted with an exemption certificate or other document acceptable to the authority imposing such tax, fee or charge. 6. TERMS OF PAYMENT All orders are subject to the approval of Marathon at its home office. Terms of payment are cash in full no later than thirty (0) days from date of shipment, without discount. If, during the period of performance of an order, the financial condition of Buyer is determined by Marathon not to justify the terms of payment specified, Marathon may demand full or partial payment in advance before proceeding with the work, or satisfactory security or guarantees that invoices will be promptly paid when due, or, at its option without prejudice to other lawful remedies, may defer delivery or cancel this contract If delivery is deferred, the equipment may be stored as provided in Section 9 hereof and Marathon may submit a new estimate of cost for completion based upon prevailing conditions. If Buyer defaults in any payment when due, or in the event any voluntary or involuntary bankruptcy or insolvency proceedings involving Buyer are initiated by or against Buyer, then the whole contract price shall immediately become due and payable upon demand, or Marathon, at its option without prejudice to its other lawful remedies, may defer delivery or cancel this contract Prorata payments shall become due as shipments are made. If shipments are delayed by the Buyer for any cause, payments shall become due from the date on which Marathon is prepared to make shipment and storage shall be at the Buyer s risk and expense as provided in Section 9 hereof. If manufacture is delayed by the Buyer for any cause, a Partial payment based upon the proportion of the order completed shall become due from the date on which Marathon is notified of the delay. 7. DELIVERY; RISK OF LOSS All sales are F 0.B. Marathon s plant or other point of shipment designated by Marathon. Shipping dates are estimates only which are not guaranteed and are based upon prompt receipt from Buyer of all necessary shipping and other information, Marathon reserves the right to make delivery in installments. All installments to be separately invoiced and paid for by Buyer when due per invoice, without regard to subsequent deliveries. Delivery of equipment to a commercial carrier at Marathon s plant or other loading point shall constitute delivery to Buyer, and any risk of loss and further cost and responsibility thereafter for claims, delivery, loss or damage, including if applicable, placement and storage shall be borne by Buyer. When equipment is delivered by Marathon s truck, unloading at Buyer s dock shall constitute delivery to Buyer. Claims for shortages or other errors in delivery must be made in writing to Marathon within ten (0) days after receipt of shipment and failure to give such notice shall constitute unqualified acceptance and a waiver of all such claims by Buyer. Claims for loss or damage to equipment in transit by common carrier must be made to the carrier and not to Marathon. Freight and handling charges by Marathon may not reflect actual freight charges prepaid to the carrier by Marathon due to incentive discounts earned by Marathon based upon Marathon s aggregate volume of freight tendered to a carrier or when a carrier must be used which charges a rate which is different than the rate upon which Marathon s freight and handling charges were based. When shipments are delivered in Marathon s private trucks, Buyer will be charged an amount approximating the prevailing common carrier rate. 8. EXCUSABLE DELAYS FORCE MAJEURE Marathon shall not be liable for any loss or damage as a result of Marathon s delay in or failure of delivery or installation due to (i) any cause beyond Marathon s reasonable control, (ii) an act of God, act of the Buyer, Terms & Conditions embargo or other governmental act, authority regulation or request, fire, theft, accident, strike, slow-down or other labor disturbance, war, riot, delay in transportation, or (iii) inability to obtain necessary labor, materials, components or facilities. Should any of the aforementioned events of force majeure occur, Marathon at its option, may cancel Buyer s order with respect to any undelivered equipment or extend the delivery date for a period equal to the time lost because of delay. Notice of such election shall be given promptly to Buyer. In the event Marathon elects to so cancel the order Marathon shall be released of and from all liability for failure to deliver the equipment including, but not limited to any and all claims on behalf of Buyer for lost profits or any other claim of any nature which Buyer might have. If shipping or progress of the work is delayed or interrupted by Buyer, directly or indirectly, Buyer shall pay Marathon for all additional charges resulting therefrom. 9. STORAGE If the equipment is not shipped within thirty (0) days after notification has been made to Buyer that it is ready for shipping, for any reason beyond Marathon s control, including Buyers failure to give shipping instructions, Marathon may store the equipment at Buyer s risk and expense in a warehouse or upon Marathon s premises, and Buyer shall pay all handling, transportation and storage costs at the prevailing commercial rates promptly following Marathon s submission of invoices for such costs. O. WARRANTIES TO DISTRIBUTORS AND INDUSTRIAL OR COMMERCIAL CUSTOMERS This warranty is extended only to Marathon s distributors and industrial or commercial customers and does not apply to consumer purchasers. Warranty Period - Marathon warrants products manufactured by it to be free from defects in materials and workmanship and to conform to Marathon s written specifications for a period of twelve () months from date of first use or eighteen (8) months from date of manufacture whichever period shall expire first. Warranty Remedies - If prior to expiration of the foregoing warranty period, any product shall be proved to Marathon s satisfaction to be defective or nonconforming, Marathon will repair or replace such defective equipment or components thereof. F.O.B. Marathon s plant or other destination designated by Marathon or will refund or credit by Marathon, the purchase price paid therefor by Buyer, at Marathon s sole option. Buyer s exclusive remedy and Marathon s sole obligation under this warranty shall be limited to such repair or replacement, F.O.B. Marathon s plant or other destination designated by Marathon or refund or credit by Marathon, and shall be conditioned upon Marathon s receiving written notice of any defect within sixty (60) days after it was discovered or by reasonable care should have been discovered. In no event shall Marathon s liability for such defective or nonconforming products exceed the purchase price paid by Buyer therefore. Exclusions - This warranty does not (i) cover shipping expenses to and from Marathon s factory or other destination designated by Marathon for repair or replacement of defective equipment or any tax, duty, custom, inspection or testing fee, or any other charge of any nature related thereto, nor does it cover the costs of removing defective equipment or reinstalling repaired or replaced equipment, (ii) apply and shall be void with respect to equipment operated in excess of rated capacity or otherwise not in accordance with installation, maintenance or operating instructions or requirements, to equipment repaired or altered by others than Marathon or Marathon s authorized service agencies, or to equipment which was subjected to abuse, negligence, misuse, misapplication, accident, damages by circumstances beyond Marathon s control, to improper installation (if by others than Marathon), operation, maintenance or storage, or to other than normal use or service, and (iii) apply to equipment or components not manufactured by Marathon. With 48

150 Terms & Conditions respect to equipment or components not manufactured by Marathon, Marathon s warranty obligations shall in all respects conform and be limited to the warranty actually extended to Marathon by its suppliers but in no event shall Marathon s obligations be greater than those provided under Marathon s warranty set forth in this Section 0. THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES (EXCEPT TITLE), INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO EMPLOYEE, REPRESENTATIVE, OR AGENT OF MARATHON OTHER THAN AN OFFICER OF MARATHON IS AUTHORIZED TO ALTER OR MODIFY ANY PROVISION OF THIS SECTION 0 OR TO MAKE ANY GUARANTEE, WARRANTY, OR REPRESENTATION, EXPRESS OR IMPLIED, ORALLY OR IN WRITING, WHICH IS CONTRARY TO THE FOREGOING. Any description of the equipment, whether in writing or made orally by Marathon or Marathon s agent, specifications, samples, models, bulletins, drawings, diagrams, engineering sheets or similar materials used in connection with Buyer s order are for the sole purpose of identifying the equipment and shall not be construed as an express warranty. Any suggestions by Marathon or Marathon s agents regarding use, application or suitability of the equipment shall not be construed as an express warranty unless confirmed to be such in writing by Marathon s authorized officer at Marathon s home office.. LIMITATIONS OF LIABILITY; CONSEQUENTIAL DAMAGES Nuclear Use Disclaimer - Equipment sold by Marathon is not intended for use in connection with any nuclear facility or activity. If so used Marathon disclaims all liability for any nuclear damage, injury or contamination, and Buyer shall indemnify and hold Marathon, its officers, agents, employees, successors, assigns, and customers harmless from and against any and all losses, damages or expenses of whatever form or nature (including attorneys fees and other costs of defending any action) which they or any of them may sustain or incur whether as a result of breach of contract, warranty, tort (including negligence) or otherwise, by reason of such use. Consequential Damage Disclaimer - Marathon s liability with respect to equipment proved to its satisfaction to be detective within the warranty period shall be limited to repair, replacement or refund as provided in Section 0 hereof and in no event shall Marathon s liability exceed the purchase price of the equipment involved. Marathon shall not be subject to any other obligations or liabilities, whether arising out of breach of contract, warranty, tort (including negligence) or other theories of law, with respect to equipment sold or services rendered by Marathon, or any undertakings, acts or omissions relating thereto. Without limiting the generality of the foregoing, Marathon specifically disclaims any liability for property or personal injury damages, penalties, special or punitive damages, damages for lost profits or revenues, loss of use of equipment or any associated equipment, cost of capital, cost of substitute products, facilities or services, down-time, shut-down, or slow-down costs, or for any other types of economic loss, and for claims of Buyer s customers for any such damages. MARATHON SHALL NOT BE LIABLE FOR AND DISCLAIMS ALL CONSEQUENTIAL, INCIDENTAL AND CONTINGENT DAMAGES WHATSOEVER. EVEN IF THE REPAIR OR REPLACEMENT REMEDY SHALL BE DEEMED TO HAVE FAILED OF ITS ESSENTIAL PURPOSE UNDER SECTION -79 OF THE UNIFORM COMMERCIAL CODE, MARATHON SHALL HAVE NO LIABILITY TO BUYER FOR CONSEQUENTIAL DAMAGES, SUCH AS LOST PROFITS, LOST REVENUE, DAMAGE TO OTHER EQUIPMENT OR LIABILITY OR INJURY TO A THIRD PARTY.. INDEMNIFICATION BY BUYER Buyer shall indemnify, hold harmless, and defend Marathon and Marathon s employees and agents from and against any and all damages, liability, claims, losses, and expenses (including reasonable attorneys fees, court costs, and out-of-pocket expenses) arising out of or resulting in any way from claims by customers of Buyer or third parties against Marathon alleging a breach of contract or warranty by Marathon to the extent that such damages, liability, claims, losses, and expenses which may be payable by Marathon to Buyer pursuant to and as limited by Marathon s warranty and damage obligations as contained in Sections 0 and hereof so as to effectively limit Marathon s obligations to customers of Buyer or third parties to those set forth in Sections 0 and hereof.. PATENT INDEMNIFICATION Marathon will at its own expense, defend or settle any suits that may be instituted against Buyer for alleged infringement by the equipment of any United States patent, provided that (a) such alleged infringements consists of the use of the equipment for any of the purposes for which such equipment was sold, (b) Buyer shall have made all payments for such equipment then due hereunder, (c) Buyer shall give Marathon immediate notice in writing of any such suit and transmit to Marathon immediately upon receipt all processes and papers served upon Buyer, and (d) Buyer shall permit Marathon through its counsel, either in the name of Buyer or in the name of Marathon, to defend such suit(s) and give all needed information, assistance and authority to enable Marathon to do so. In case of a final award of damages in any such suit, Marathon will pay such award but will not be responsible for any compromise or settlement made without its written consent. In case the equipment itself is in such suit held to infringe any valid patent issued in the United States and its use enjoined, or in the event of a settlement or compromise approved by Marathon which shall preclude future use of the equipment sold to Buyer hereunder, Marathon shall, at its own expense and, at its sole option, either (a) procure rights to continue using such equipment, (b) modify the equipment to render it noninfringing, (c) replace the equipment with noninfringing equipment, or (d) refund the purchase price paid by Buyer for the equipment after return of the equipment to Marathon. Notwithstanding the foregoing, Marathon shall not be held responsible for infringements of combination or process patents covering the use of equipment in combination with other goods or materials not furnished by Marathon. The foregoing states the entire liability of Marathon for patent infringement and IN NO EVENT SHALL MARATHON BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO AN INFRINGEMENT nor for infringement based on the use of the equipment for a purpose other than that for which sold by Marathon. As to any equipment furnished by Marathon to Buyer manufactured in accordance with designs proposed or furnished by Buyer or any claim of contributory infringement resulting from the use or resale by Buyer of equipment sold hereunder, Buyer shall indemnify Marathon against any award made against Marathon for any patent, trademark or copyright infringements, including attorneys fees and defense costs. 4. SECURITY AGREEMENT AND FINANCING STATEMENTS To secure payment of the purchase price and of all monies which may be due hereunder, and performance of all of Buyer s obligations hereunder, Buyer hereby grants to Marathon a security interest in all equipment sold by Marathon, and agrees to execute such other Security Agreements and Financing Statements as Marathon may reasonably request. 5. INSURANCE Until payment in full of the purchase price, Buyer shall maintain insurance covering all equipment sold by Marathon to Buyer in such amounts and against such risks as is customary by companies engaged in the same or similar business and similarly located, and shall, upon Marathon s request, furnish evidence of such insurance satisfactory to Marathon. 6. DRAWINGS: OTHER DESIGN DATA All specifications, drawings, design, data, information, ideas, methods, patterns and/or inventions made, conceived, developed or acquired by Marathon in connection with procuring and/or executing Buyer s order will vest in and inure to Marathon s sole benefit notwithstanding any changes therefor which may have been or may be imposed by Marathon. Buyer shall not give, loan, exhibit, sell or transfer to any person not then employed by Buyer and authorized to receive such information, or to any organization or entity, any drawing, photograph, or specification furnished by Marathon or reproduction thereof which may enable such person, organization or entity to furnish similar goods or parts therefor. 7. RETURN OF EQUIPMENT No equipment or part shall be returned to Marathon without written authorization and shipping instructions first having been obtained from Marathon. 8. ASSIGNMENT None of the Buyer s rights under any order shall be assigned by the Buyer to any other person, whether by operation of law or otherwise, without Marathon s prior written approval. Marathon may, without the necessity of obtaining Buyer s prior written consent, subcontract the production of all or any portion of the equipment. 9. CANCELLATION No order submitted to Marathon may be cancelled by Buyer without the prior written consent of Marathon, which consent will at all times be conditioned on Buyer s agreement to pay Marathon s cancellation charge. For finished equipment which in Marathon s judgment is readily resalable to others, the cancellation charge shall be 5% of the invoice price of the equipment. For all other cancellations the cancellation charge shall amount to all costs and expenses incurred by Marathon and arising out of or in connection with the Buyer s order, net of recoverability, but in no event less than 0% of the invoice price of the equipment or more than the invoice price. 0. GENERAL Governing Law - These Terms and Conditions, and the contract of sale between Marathon and Buyer, shall be governed by and construed in accordance with the internal laws of the State of Ohio. Marathon and Buyer hereby agree that any legal action deemed necessary by either party hereto shall be brought in the Circuit Court in and for Wood County, Ohio and hereby consent to the personal jurisdiction of such court in any such action over the parties hereto. The rights and obligations of Marathon and Buyer shall not be governed by the provisions of the United Nations Convention on Contracts for the International Sales of Goods. Attorneys Fees - Buyer agrees to pay all of Seller s costs and expenses of collection and related litigation, including but not limited to attorneys fees and costs. Salvatory Clause - The invalidity, in whole or in part, of any of the provisions of these Terms and Conditions, shall not affect the enforceability of any of the other provisions thereof. Applicability - The Terms and Conditions as stated herein are applicable as of the date of this printing and until such time as changed by Marathon. Revised, January 00 49

151 IMPORTANT INFORMATION PLEASE READ CAREFULLY The following DANGER, WARNING and CAUTION information is supplied to you for your protection and to provide you with many years of trouble free and safe operation of your Marathon Special Products components. DANGER Devices sold by Marathon Special Products provide for interconnection of electrical circuits and as such are, or can be, points of live electrical contact. It is the responsibility of the Buyer or user to ensure through the use of enclosures, insulation, engineering controls, or other means in the application, that the wiring device is protected from intentional or accidental contact in an energized condition. Failure to do so can create the potential for electrical shock and associated serious injury. Only qualified personnel should install and troubleshoot electrical products due to the potential for serious injury related to electrical shock. Make certain that the power supply is disconnected and/or locked out before attempting to install, remove or service components. WARNING Connection tightness is critical to electrical performance. Buyer, user, or installer must always ensure that the proper screw torque is applied and maintained. Buyer or user must ensure that proper clearances are maintained between energized electrical components and all other devices including but not limited to the enclosure and mounting mechanism. CAUTION Install and ground per local and national code. Buyer shall be solely responsible for determining the adequacy of the product for any and all uses to which Buyer shall apply the product. Buyer must ensure that the application of the device conforms to all standards, codes, policies or practices that govern or apply to their equipment or application. Marathon Special Products uses design parameters, materials, and construction methods intended to meet the standards noted in the engineering catalog, with specific suitability of use and restrictions as noted in the appropriate agency files. The application by Buyer shall not be subject to any implied warranty of fitness for a particular purpose. Products in this catalog are tested and listed with various standards agencies. They will meet or exceed all performance guidelines as tested and qualified. Buyer or user must check that applications do not exceed rated capacities of voltage and amperage and that appropriate wiring practices are followed. Products are intended for use in an "as sold" condition. Modification of components can affect performance and ratings and subsequently the safety of the component system. Buyer or user assumes liability for component modification. Electrical products in this catalog are designed for use in appropriate enclosures. Buyer or user is responsible to ensure that appropriate environmental control is designed into the application. In the event of the resale of any goods, in whatever form, Resellers/Buyers will include the following language in a conspicuous place and in a conspicuous manner in a written agreement covering such sale: The manufacturer makes no warranties or representations, express or implied, by operation of law or otherwise, as to the merchantability or fitness for a particular purpose of the goods sold hereunder. Buyer acknowledges that it alone has determined the goods purchased hereunder will suitably meet the requirements of their intended use. In no event will the manufacturer be liable for consequential, incidental or other damages. Even if the repair or replacement remedy shall be deemed to have failed of its essential purpose under section -79 of the Uniform Commercial Code, the manufacturer shall have no liability to Buyer for consequential damages. Resellers/Buyers agree to also include this entire document including the dangers,warnings and cautions listed above in a conspicuous place and in a conspicuous manner in writing to instruct users on the safe usage of the product. This information should be read together with all other printed information supplied by Marathon Special Products. For more information contact: Marathon Special Products, Subsidiary of Marathon Electric, 00 Van Camp Road, Bowling Green, OH. 440 Phone: Fax:

152 Notes 5

153 5 Notes

154 Marathon Is Quality ISO 900 Registered MARATHON SPECIAL PRODUCTS ENGINEERING CATALOG 00 Van Camp Road P.O. Box 468 Bowling Green, Ohio 440 Phone: (49) Fax: (800) K/SK/7500/-08/DBH