General Purpose Relays Types K, R, N, and C

Transcription

1 General Purpose Relays s K, R, N, and C Catalog 0CT00R/0 00 Class 0 CONTENTS Description Page R Miniature Plug-in Relays K Plug-in Relays KA Alternating Relays N Sockets and Accessories C Power Relays Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

2 0/ Schneider Electric Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

3 R Miniature Plug-in Relay General and Order Information SPDT 0/0 Hz Options and RS* RSM* RSP* RSMP* RSD* These miniature plug-in relays have a 0 Ampere resistive rating (except for RS/RSD), the same as the K plug-in relays, but are much smaller. The compact size of these relays makes them ideal for downsizing equipment. SPDT through PDT or Operated Horsepower rated UL Contact Ratings h RS and RSD relays have a B00 rating. Resistive Rating General Use Rating Horsepower Rating 0RS h 0 V 0 / 0 V 0 / 0RSD h V 0RS 0 V 0 0 / 0 V 0 0 / 0RSD 0 V 0 0 0RS 0 V V 0 0 0RSD V 0 0 0RS 0 V V 0 0 0RSD V 0 0 Stocked Relays Complete line of Sockets / Bidirectional Green LED Pilot Light Options 0/0 Hz Code V V V V0 V Code V0 V V V0 RS S S RSD S S RSM S S RSDM S RSP S S RSDP S RSMP S S RSDMP S RS S S S S S RSD S S S RSM RSDM RSP S S S RSDP S S S S RSMP S RSDMP S RS S S RSD S RSM RSDM RSP S RSDP RSMP S RSDMP RS S S S RSD S S RSM RSDM RSP S RSDP S RSMP S RSDMP S Stocked Factory Order items require a minimum order quantity of and have a lead time of weeks. Silver Cadmium Oxide Contacts DPDT Silver Cadmium Oxide Contacts PDT Silver Cadmium Oxide Contacts PDT Silver Cadmium Oxide Contacts 0/0 Hz 0/0 Hz 0/0 Hz and Options and and Options and and Options and RSDM* RSDP* RSDMP* RS* RSM* RSP* RSMP* RSD* RSDM* RSDP* RSDMP* RS* RSM* RSP* RSMP* RSD* RSDM* RSDP* RSDMP* RS* RSM* RSP* RSMP* RSD* RSDM* RSDP* code must be specified to order this product. Refer to standard voltage codes listed in the Stocked Relay table to the left and insert as shown in How To Order. How to Order: To Order Specify: Class Number Number Code (See Stocked Relay Table to left) and RSDMP* Catalog Number Class Code 0 RS V0 Application Data page Wiring Diagrams page Dimensions page Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

4 R Miniature Plug-in Relay General and Order Information 0 R relays are suited for use as logic elements and power switching output devices. The short stroke motion of the armature provides long mechanical life required for high speed operation of control systems. Different contact compositions allow these relays to be used in a variety of applications. Fine silver (gold flashed) and bifurcated crossbar (gold overlay silver) are suitable for high contact reliability and low level switching requirements. Silver cadmium oxide is best suited for inductive loads. Hermetically sealed relays can be used in adverse environments.,, or Ampere Versions Horsepower Rated PDT or Operation Complete Socket Line / Options A Options For switching inductive loads Contacts: Silver Cadmium Oxide 0/0 Hz and and RS RSM RSP RSMP RSD RSDM RSDP RSDMP A Options For low level switching Contacts: Fine Silver (Gold Flashed) 0/0 Hz and and RS RSM RSP RSMP RSD RSDM RSDP RSDMP A Best for low level switching 0/0 Hz RS Bifurcated Silver Gold Plated Contacts RSD Option An Internal green pilot light is available in both and versions for positive indication of power to the coil. The pilot lights are bidirectional LEDs. Manual Operation Option To speed circuit testing, a manual operator can be provided. The relay can be manually switched to simulate normal operation. NOTE: All R relays with a manual operator must be used on circuits of same polarity. Contact Ratings RS h RSD h RS h RSD h RS RSD RS 0 RSV 0 RSDPV 0 RSMV Continuous Current Rating Horsepower Rating 0/0 V / 0 0 V 0/0 V / 0 V 0/0 V / a 0 V 0/0 V RSD 0 V h RS/RSD, RS/RSD have C00 pilot duty rating. a Horsepower rating at 0 V. Hermetically Sealed Ampere Resistive q Silver Cadmium Oxide Contacts Suitable for Class I Division Locations 0/0 Hz RS code must be specified to order this product. Refer to standard voltage codes listed in the Stocked Relays table on page and insert as shown in How To Order. q Do not ground frame. RSD How to Order: To Order Specify: Class Number Number Code (See Stocked Relay Table on page ) Catalog Number Class Code 0 RS V0 Application Data page Wiring Diagrams page Dimensions page Sockets and Holddown Clips page 0/ Schneider Electric Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

5 R Miniature Plug-in Relay Ordering Information and Application Data Stocked Relays 0/0 Hz Code V V V V V0 V Code V0 V V V V0 RS S S RSD S S RSM S RSDM RSP S RSDP S RSMP S RSDMP S RS S S S RSD S S S RSM S RSDM S RSP S RSDP S S S RSMP S S RSDMP S S RS S RSD S RS S RSD S S S Stocked Factory Order items require a minimum order quantity of and have a lead time of weeks. Class 0 RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD Pick-Up Time ms Maximum ms Max. 0 ms Maximum Operating Data Coil Drop-Out Time Operating Temperature Range Duty Cycle Range Coils. VA sealed ms Maximum ms Max. 0 ms Maximum -0 C to +0 C (-0 F to + F). VA sealed. VA sealed - C to +0 C (- F to + F) Continuous coils +0%, -% of nominal coils +0%, -0% of nominal. VA sealed -0 C to +0 C (-0 F to + F) Coils 0. watt 0. watt 0. watt 0. watt 0. watt 0. watt.0 watt.0 watt. VA inrush,. VA sealed. VA inrush,. VA sealed. VA inrush,.0 VA sealed. VA inrush,. VA sealed CCN E0 NRNT N/A E NLDX E NRNT CCN E0 NRNT (Approved but not marked) E0 NQMJ, NQMJ N/A Class 0 N/A 0 Yes CCN E NLDX E0 NPKR, NPKR E NLDX N/A When used with the appropriate 0 NR socket Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

6 R Miniature Plug-in Relay Dimensions and Wiring Diagram Wiring Diagrams 0 0 RS, RSD RS, RSD RS, RSD RS, RSD 0 RS, RSD, RS, RSD, RS, RS, RSD, RS, RSD. For devices with manual operator.0. B- #- NC- A THREAD B- #- NC- A THREAD RS, RSD, RS, RSD, RS, RSD..... RS, RSD (When Provided) (When Provided) (When Provided) (When Provided) (When Provided) (When Provided).0 RS, RSD RS, RSD (When Provided)..0 (When 0.0 Provided) (When Provided) (When 0.0 Provided) (When Provided) (When Provided).0 RS, RSD RS, RSD Dual Dimensions: Inches Millimeters 0/ Schneider Electric Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

7 K - Plug-in Relay Dimensions and Wiring Diagram 0 K relays are designed for multipole switching applications at 0 volts or lower. These relays have industry standard wiring and pin arrangements which allows for their use as replacements for many similar relays without wiring or hardware modifications. 0 or Ampere Versions Horsepower Rated DPDT or PDT DPDT Latching Relay / or Operation Red Options KF c Flange Mounted Spade Terminals 0/0 Hz Contact Arrangement DPDT PDT DPDT PDT c Socket is not required with KF relays. Options Available Available KL Latching Relay Spade Terminals Stocked Relays 0/0 Hz Contact Arrangement Options KF KF KFD KFD DPDT Available KL DPDT Available KLD 0/0 Hz Codes V V V V0 V Codes V0 V V V V0 V KP S S S S S KPD S S S S S S KPP S S S S KPDP S S S S KP S S S S KPD S S S S S KPP S S S KPDP S S KU S S S S KUD S S KUM KUDM S KUP S S KUDP KUMP S S S KUDMP S KU S S S S KUD S S S S KUM KUDM S KUP S S KUDP KUMP S S S KUDMP S S S KF S S S KFD S S KF S S KFD S KL S S S KLD S S KP Tubular Terminals 0/0 Hz KU Spade Terminals 0/0 Hz Contact Arrangement Options DPDT KP DPDT KPP PDT KP PDT KPP DPDT KPD DPDT KPDP PDT KPD PDT KPDP Contact Arrangement Options DPDT KU DPDT KUM DPDT KUP DPDT and KUMP PDT KU PDT KUM PDT KUP PDT and KUMP DPDT KUD DPDT KUDM DPDT KUDP DPDT KUDMP and PDT KUD PDT KUDM PDT KUDP PDT and KUDMP Option Available on s KP and KU. Internal pilot lights are available in both ac and dc versions for positive indication of power to the coil. The pilot light will be a red bidirectional LED. Option Available on KU only. To speed circuit testing a manual operator can be provided. With this feature the relay can be manually switched to simulate normal operation. Application Data page Dimensions page Sockets page S Stocked Factory Order items require a minimum order quantity of and have a lead time of weeks. code must be specified to order this product. Refer to standard voltage codes listed in the Stocked Relays table above and insert as shown in How To Order. How to Order: To Order Specify: Class Number Number Code (See Stocked Relay Table above) Catalog Number Class Code 0 KP V Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

8 K Plug-in Relay Application Data, Dimensions, Wiring Diagrams Contact Ratings Volts Resistive % PF Continuous Amperes l 0 KP, KU, and KF relays have a B00 rating. c pole devices have a 0 A max. total (sum of currents in all poles), continuous rating. q pole devices have a 0 A max. total (sum of currents in all poles), continuous rating. HP Volts Resistive Amperes KP l 0 0 / c / KU l KF l 0 q / c / KL 0 0 / / Wiring Diagrams A KU, KUD KF, KFD A KU, KUD KF, KFD B B KP, KPD 0 KP, KPD A COMMON A + KL LATCH RESET KLD RESET B LATCH B + Operating Data Typical Pick-Up Time KP KF, KU Comments coil: approximately ms coil: approximately ms coil: approximately ms coil: approximately ms KL approximately ms Approximate Dimensions. dia MAX Typical Drop-Out Time Operating Temperature Range KP KF, KU KL KF, KP, KU KL coil: approximately ms coil: approximately ms coil: approximately ms coil: approximately ms approximately ms : pole: -0 C to + C (-0 F to + F) pole: -0 C to + C (-0 F to + F) : -0 C to +0 C (-0 F to + F) /: - C to +0 C (- F to + F).. MAX KU... MAX..... Contacts KP Configuration PDT or PDT ( or Form C) Coils General Ratings Material Duty Terminals: Solder/plug-in UL/CSA: For 0 KP, KU, and KF: See contact ratings table above. KF, KU, and KL Silver cadmium oxide KP Silver nickel Continuous rated coils Available s See Stocked Relays page. Operate Typical Burden : +0, -% of Nominal at C ( F) : +0, -% of Nominal at C ( F) s KP, KU, KF KL :. VA inrush,. VA sealed :. watts standard, watts maximum :.0 VA latch, 0. VA unlatch :. watts.. MAX KL.0. MAX...0 MAX. 0.0 R(TYP) 0... MAX KF MAX MAX MAX Inches Dual Dimensions: Millimeters CCN E0 NRNT For 0 KP, KU, and KL: CCN E NLDX Class 0 When used with the appropriate 0NR socket. For 0 KL: CCN E NLDX Class 0 0/ Schneider Electric Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

9 KA Alternating Relays General Information and Specifications KA Alternating Relay Contact Arrangement Options & SPDT LED, Toggle 0KA & DPDT LED, Toggle, Duplex Pumping 0KA & DPDT (N.C.) LED, Toggle 0KA & DPDT (N.O.) LED, Toggle 0KAA Contact Ratings 0 KA alternating relays are designed to minimize pump and motor wear by equalizing run time between parallel components in a multi-pump system. These relays are controlled by an external control switch. This switch may be any type of contact closure; for example, the contacts of a timing relay or the closure of a float switch. The 0 KA relays also have a toggle switch that allows the operator to lock one side of the duplex system, preventing alternation. A Resistive Rating Horsepower Rated SPDT or DPDT and Control Toggle switch for load control UL Listed w/ SquareD Socket LED Load Indicators Rohs Compliant 0KA Relay Availability Volts Resistive HP Pilot Duty Volts Resistive Amperes Amperes 0 / B / B00 & 0 0 Code V V V0 V 0KA S S 0KA S S 0KA S S 0KA S S = 0/0 Hz S Stocked. Stocked items do not require a minimum quantitiy and have a lead time of weeks. All other part numbers require a minimum order quantity of 00 and have a lead time of weeks. Alternating Functions Diagram Toggle Switch Position Detail S = Control Switch S = Control Switch LA = Load LB = Load A, C & D B All Alternate Closing S alternates the loads between LA and LB. Lock LA is ON and LB is OFF. S is not used in this mode. Lock LA is OFF and LB is ON. S is not used in this mode. Alternate Closing S alternates the loads between LA and LB. S will only control LA. Lock S will control LA and S will control LB. Lock S will control LB and S will control LA. The cross wired option allows extra system load capacity through simultaneous operation of both motors when needed (LA and LB energize simultaneously when both S and S are closed - relay contacts are not isolated). voltage must be applied at all times for proper alternation. Use of a solid state control switch for S or S may not initiate alternation correctly. S or S voltage must be from the same supply as the unit s input voltage (see wiring diagrams). Loss of input voltage resets the unit; LA becomes the lead load for the next operation Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

10 KA Alternating Relays Wiring Diagrams and Approximate Dimensions Wiring Diagrams A B S V 0KA Socket = 0NR or NR 0KA Socket = 0NR or NR C D 0KA Socket = 0NR or NR 0KAA Socket = 0NR or NR Approximate Dimensions FILE CLASS E NLDX FILE CLASS 0 0 0/ Schneider Electric Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

11 N Sockets and Accessories General and Order Information 0 NR sockets are designed for use with plug-in 0 K and R relays, 0 MPS phase failure relays and 00 JCK timers. The 0 NR screw terminal sockets have pressure wire clamps that accept or #- wires. All other sockets have pressure clamps that will accept or #- wires. The recommended tightening torque for all terminals is - lb-in. All Devices Stocked in Central Warehouse DIN Track Mount or Direct Panel Mount Tubular Sockets Available in Easy-to-Wire Single Tier or Space-Saving Multi-Tier Versions Snapmount Sockets Class 0 KP KPD KP KPD KL KU RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD RS RSD Must be ordered in multiples of the quantity listed. Units provided in standard quantity of one are individually packaged; devices with B suffix have a standard quantity of 0 per bulk pack. Rated for use with Class 0 MPS at 0 Volts. q 0 A maximum total load (CSA) NOTE: For DIN mounting track and end clamps refer to the NEMA type terminal block section 00CT0 or the IEC type terminal block section 00CT0R/0. UL/CSA: For Use With Class 0 MPS (0 volts) MPS (0 Volts) CCN Class 00 JCK JCK JCK JCK0 JCK F JCK F JCK F JCK JCK JCK0 JCKF JCKF How to Order: To Order Specify: Class Number Number E SWV Description Pin Tubular Single Tier Pin Tubular Double Tier Pin Tubular Single Tier Pin Tubular Double Tier Pin Spade Double Tier Pin Spade Double Tier Pin Spade Double Tier Pin Spade Double Tier Pin Spade Double Tier Pin Spade Double Tier Socket Rating UL 0 A 00 V A 00 V A 00 V A 00 V A 00 V A 00 V A 00 V A 00 V CSA 0 A 00 V 0 A 00 V 0 A 00 V q 0 A 00 V q A 00 V j A 00 V j 0 A 00 V Class 0 NR NRB NR NRB NR NRB NR NRB NR NRB NR NRB NR NRB 0 A 00 V q NR NRB 0 A 00 V q NR NRB 0 A 00 V NR NRB LR Class 0 Catalog Number Class 0 NRB Std. Qty Socket Accessories Socket For Use With Description Catalog Number Std. Pack 0NR 0KP, KPD Hold Down Clip Not Available 0MPSV Restraining Strap 0NH 00JCK Restraining Strap 0NH 0NR 0KP, KPD Hold Down Clip 0NH 0 0MPSV Restraining Strap 0NH 00JCK Restraining Strap 0NH 0NR 0KP, KPD Hold Down Clip Not Available 00JCK Restraining Strap 0NH 0NR 0KP, KPD Hold Down Clip 0NH 0 00JCK Restraining Strap 0NH 0NR 0KU and KL Hold Down Clip 0NH 0 0MPSV Restraining Strap 0NH 0NR 0RS, RSD Hold Down Clip Supplied with socket as standard 0NR 0RS, RSD Hold Down Clip 0NH 0 0NR 0RS, RSD Hold Down Clip 0NH 0 0NR 0RS, RSD Hold Down Clip 0NH 0 0NR 0 NR 0 NR 0 NR 0 NR 0 NR 0 NR 0 NH 0RS, RSD 0RS, RSD 0RS, RSD 0RS, RSD 0 NR 0 NR 0 NR 0 NR Hold Down Clip 0NH 0 Dimensions page Terminal Locations page Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

12 MADE IN CHINA N Sockets and Accessories General and Order Information NR NR Terminal screws M. x Terminal Location Terminal screws M. x Terminal Location Top View Top View NR NR Terminal screws - x /" 0. dia () TERMINAL LOCATION 0 TOP VIEW TERMINAL LOCATION 0 TOP VIEW NR NR B A TERMINAL LOCATION TERMINAL LOCATION Terminal Screws M. x B A TOP VIEW Typ TOP VIEW Terminal Screws -0 x /" Schneider Electric /0 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

13 N Sockets and Accessories General and Order Information NR NR.0. Terminal Screws M X 0. Terminal Screws M. X A A REF. TERMINAL LOCATION TOP VIEW.. Terminal Screws - x /" 0.0. DIA. TYP TERMINAL LOCATION TOP VIEW NR NR Terminal Screws - x." Terminal Screws - x." 0.. TERMINAL LOCATION TOP VIEW TERMINAL LOCATION 0 TOP VIEW Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

14 C Power Relays Application Data, Dimensions, Order Information Class 0 C relays are ideally suited for controlling small single phase motors and other light loads such as electric heaters, pilot lights or audible signals. 0 Ampere Contact Rating CE Approved Horsepower Rated Visible Contacts UL Listed Low Cost CSA Certified 0CDOV Contact Arrangement Selection Table Rated Contacts Application Data Contact Ratings Application Data Coil Burden Number of Fixed Contacts Operated Coil Open Operated Coil Open Maximum Contact Resistive Ampere Rating % Power Factor Maximum Single Phase Horsepower Nominal Power (V Coil) Nominal Burden (V Coil) N.O. N.C. 00V 00V 0V 0V 00V SPST 0 CO CDO VA W DPST 0 CO CDO 00 0 / / / 0VA W SPST 0 CO CDO VA W SPDT CO CDO 00 0 / / / 0VA W DPDT CO CDO 00 0 / / / 0VA W Selection Table Rated Contacts Application Data Contact Ratings Application Data Coil Burden 0V 0V SPST 0 CO CDO VA W N.A. DPDT CO CDO 0 0VA W code must be specified to order this product. Refer to standard voltage codes listed in the Stocked Relays table below and insert as shown in How to Order. Enclosure: Separately packed NEMA sheet steel enclosure for s CO & CDO relays order Class UE Operating Data Operating s/ Range Coil Inrush (V Coil) Coils Operating Temp. Range UL/CSA: CCN E NLDX Approximate Dimensions through 0 volts, + 0/-% of nominal at C through 0 volts, + 0/-0% of nominal at C VA Duty: Continuous rated coils. (Non-replaceable) : - F to + F (-0 C to +0 C) : - F to +0 F (-0 C to +0 C) 0 Class 0 Dimensions Catalog A B C D E F Number 0 IN mm IN mm IN mm IN mm IN mm IN mm CO, CO, CO, CDO, CDO, CDO CO, CO, CDO, CDO CO,CDO CO, CDO Stocked Relays Class 0 Code 0/0 Hz Class V V V V0 V0 V V0 V Code V0 V V V0 CO S S S S S S S CDO S S CO S S S S S S S CDO S S CO S S S S S S CDO S CO S S S S S S S CDO S CO S S S S S S S CDO S S S CO S CDO S S CO S CDO S S S Stocked Factory Order items require a minimum order quantity of and have a lead time of weeks. How to Order: To Order Specify: Class Number Number Code (See Stocked Relay Table above) Catalog Number Class Code 0 CO V Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

15 C Power Relays Application Data, Dimensions, Order Information Schneider Electric 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-

16 Schneider Electric USA 00 Knightdale Blvd. Knightdale, NC --SquareD (---) Schneider Electric Canada Waterman Avenue, MB Y Toronto, Ontario CT00R/ Schneider Electric Replaces 0CT00, December 00 0/00 Courtesy of Steven Engineering, Inc.-0 Ryan Way, South San Francisco, CA 00-0-Main Office: (0) -00-Outside Local Area: (00) -00-