HIGH REPEATABILITY, TO-5 RELAYS DPDT
|
|
- Doreen Erin Johnston
- 5 years ago
- Views:
Transcription
1 HIGH REPEATABILITY, TO-5 RELAYS DPDT SERIES RELAY TYPE RF7 RF7 Repeatable, RF relay Sensitive, repeatable, RF relay DESCRIPTION The ultraminiature RF7 and RF7 relays are designed to provide improved RF signal switching repeatability over the frequency range. These relays are engineered for use in RF attenuator, RF switch matrices, ATE and other applications that require dependable high frequency signal fidelity and performance. The RF7 and RF7 feature: High repeatability Broader bandwidth Metal enclosure for EMI shielding High isolation between control and signal paths High resistance to ESD The following unique construction features and manufacturing techniques provide excellent robustness to environmental extremes and overall high reliability: Uniframe motor design provides high magnetic efficiency and mechanical rigidity Minimum mass components and welded construction provide maximum resistance to shock and vibration Advanced cleaning techniques provide maximum assurance of internal cleanliness Hermetically sealed Solder Dipped Leads, (RoHS compliant solder option available) The Series RF7D/RF7 relays have internal discrete silicon diodes for coil suppression and polarity reversal protection. This hybrid package reduces required PC board floor space by reducing the number of external components needed to drive the relay. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Temperature (Ambient) Vibration (General Note I) Shock (General Note I) Enclosure Weight Storage Operating RF7 RF7 55 C to +85 C 45 C to +65 C 1 g s to 5 Hz g s, 6ms half sine Hermetically sealed.9 oz. (2.55g) max..16 oz. (4.5g) max. INTERNAL CONSTRUCTION UPPER STATIONARY MOVING LOWER STATIONARY UNI-FRAME ARMATURE 214 TELEDYNE RELAYS (8) RF7/RF7 Page 1
2 SERIES RF7/RF7 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) Insertion Loss (RF Note 6) VSWR (RF Note 6) VSW R RF7/RF7 Time Response (RF Note 6).9.7 9% 7ps reference Volt.5 62.ps propagation delay time ps pulse rise time 1% T ime ( ps) RF NOTES 1. Test conditions: a. Fixture:.1" copper clad, reinforced PTFE, RT/duroid 62 with SMA connectors. (RT/duroid is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 5-ohm load. d. Contact signal level: 1 dbm. e. No. of test samples: Data presented herein represents typical characteristics and is not intended for use as specification limits.. Data is per pole, except for pole-to-pole data. 4. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data. RF7/RF7 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 214 TELEDYNE RELAYS
3 SERIES RF7/RF7 TYPICAL RF REPEATABILITY PERFORMANCE (See RF Notes 1,2 and ) 1 Million Cycle Repeatability ±.1 db from DC to GHz Series RF7/RF7.12 Typical repeatability of attenuation during life (normally open contacts).1.8 ±db MAX X MIN Number of cycles X Typical repeatability of insertion loss during life (normally closed contacts).1.8 ±db.6 MAX X MIN Number of cycles X1 6 RF NOTES 1. One million cycle repeatability data is based upon 96 observations with an average repeatability ±. db and a range of ±.9 db. 2. Repeatability of attenuation values were obtained from tests conducted in a 2 db attenuator network with a dbm input signal.. Relay operates at frequencies higher than GHz with reduced RF performance characteristics. 4. Curves were developed from tests performed on a.1" copper clad, reinforced PTFE circuit board at 2 C (ref). The unutilized contacts were terminated in 5 ohms; characteristic impedance of measuring equipment is 5 ohms. The relays were mounted fl ush to the circuit board ground plane without the relay header soldered to the ground plane. 214 TELEDYNE RELAYS (8) RF7/RF7 Page
4 SERIES RF7/RF7 GENERAL ELECTRICAL SPECIFICATIONS C) Contact Arrangement Rated Duty Contact Resistance Contact Load Rating Contact Life Ratings Coil Operating Power Operate Time Release Time Intercontact Capacitance Insulation Resistance Dielectric Strength 2 Form C (DPDT) Continuous.15 Ω max. Resistive: 1Amp/28Vdc Low level: 1 to 5 1 to 5 mv 5,, cycles (typical) at low level RF7-5: 5 nominal coil RF7-5: 25 nominal coil RF7: 4. ms max. RF7: 6. ms max. RF7:. ms max. RF7:. ms max..4 pf typical 1, MΩ min. between mutually isolated terminals 5 Vrms (6 atmospheric pressure DETAILED ELECTRICAL SPECIFICATIONS (@25 C) BASE PART NUMBERS (RF7) RF7-5 RF7-12 Coil Voltage, Nominal (Vdc) Coil Resistance (Ohms ±2%) 5 9 BASE PART NUMBERS (RF7) RF7-5 RF7-12 Coil Voltage, Nominal (Vdc) Coil Resistance (Ohms ±2%) 1 85 RF7/RF7 Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 214 TELEDYNE RELAYS
5 SERIES RF7/RF7 OUTLINE DIMENSIONS.7 (9.4) DIA. MAX..5 (8.51) DIA. MAX. H RF7:.275 (6.99) RF7:.85 (9.78).5 (.89) REF.1 (.79) REF WIRE LEAD:.75 (19.5) MIN..2 (5.8) ±.1 (.25) DIA. 6 ± TYP (.5).17 (.4).1 (.) DIA. DIMENSIONS ARE SHOWN IN INCHES (MILLIMETERS) (Viewed from Terminals) SCHEMATIC DIAGRAMS RF7/RF7 NOTES: 1. DIMENSIONS ARE IN INCHES, METRIC EQUIVALENTS SHOWN IN ( ). 2. POSTITIONS 5 AND 1 ARE FOR UNINSULATED CASE GROUND OPTIONS.. NO PROTRUSION BELOW BOTTOM OF HEADER WHEN GROUND PINS ARE INSTALLED 4. TO ORDER THE CASE GROUND OPTION, AFTER THE SERIES DESIGNATOR, ADD Y TO THE PART NUMBER FOR POSITION 5 OR Z TO THE PART NUMBER FOR POSITION 1. Teledyne Part Numbering System for RF7/RF7 Relays Relay Series RF7 X - 5 / S R Q = Solder-Coated Leads 1 G = Gold-Plated Leads (RoHS Compliant) R = RoHS Compliant Solder 2 Ground Pin Option (See Appendix A) Note: Parts ordered without suffix may be supplied with Solder-Coated or Gold-Plated leads 1 Parts ordered with Solder-Coated leads will have (Sn6/Pb4) 2 Parts ordered with RoHS Solder-Coated leads will have (Sn99./Cu.7) The slash and characters appearing after the slash are not marked on the relay. S =.187 Leads No Suffi x =.75 Leads Nominal Coil Voltage GENERAL NOTES I. Relays will exhibit no contact chatter in excess of 1 μsec or transfer in excess of 1 μsec. II. For reference only. Coil resistance not directly measureable at relay terminals due to internal series diode. 214 TELEDYNE RELAYS (8) RF7/RF7 Page 5
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT DC-4 GHz
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT DC-4 GHz SERIES RELAY TYPE GRF7 GRF73 Repeatable, RF relay Sensitive, repeatable, RF relay DESCRIPTION The ultraminiature GRF7 and GRF73 relays
More informationHIGH REPEATABILITY, DC-8 GHz/20Gbps TO-5 RELAYS, DPDT
HIGH REPEATABILITY, DC-8 GHz/Gbps TO-5 RELAYS, DPDT SERIES RELAY TYPE RF3 RF33 Repeatable, RF relay Low Power Operating Coil, RF relay DESCRIPTION The ultra miniature RF3 is designed to improve upon the
More informationSURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
SURFACE MOUNT HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES GRF300 GRF300D GRF300DD GRF303 GRF303D GRF303DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient
More informationMAGNETIC-LATCHING DC-8 GHz TO-5 RELAYS 4PST
MagneticLatching Electromechanical Relay MAGNETICLATCHING DC8 GHz TO5 RELAYS PST SERIES SGRF SGRFD RELAY TYPE PST RF Relay PST RF Relay with internal diodes for coil transient suppression DESCRIPTION The
More informationSURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 16 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY Series GRF121 SERIES GRF121 RELAY TYPE RF Magnetic-Latching, SPDT, Surface Mount Relay DESCRIPTION The ultraminiature
More informationHIGH REPEATABILITY SPDT, BROADBAND 12 GHZ, 20 Gbps MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ, 20 Gbps MAGNETIC-LATCHING RF RELAY SERIES RF121 RF121R RELAY TYPE RF Magnetic-Latching, SPDT, Common Coil Negative, Through-Hole Relay RF Magnetic-Latching, SPDT,
More informationSURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 18 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY
SURFACE MOUNT HIGH REPEATABILITY SPDT, BROADBAND 18 GHZ 40GBPS MAGNETIC-LATCHING RF RELAY Series GRF121/GRF121R SERIES GRF121 GRF121R RELAY TYPE RF Magnetic-Latching, SPDT, Common Coil Negative, Surface
More informationLoopBack Relay. LB363 Series. With Built-in AC Bypass Capacitors. LoopBack Relay, Sensitive Coil, thru-hole with AC Bypass Capacitors
LB363 Series With Built-in AC Bypass Capacitors SERIES DESIGNATION LB363 RELAY TYPE, Sensitive Coil, thru-hole with AC Bypass Capacitors DESCRIPTION The LoopBack Series relay combines two DPDT electromechanical
More informationLoopBack Relay. GLB363 Series. With Built-in AC Bypass Capacitors / DC LoopBack Relay
GLB363 Series With Built-in AC Bypass Capacitors / DC SERIES DESIGNATION GLB363 RELAY TYPE, Sensitive Coil, Surface Mount Ground Shield and Stub pins with AC Bypass Capacitors or No capacitor DESCRIPTION
More informationCENTIGRID ESTABLISHED RELIABILITY RELAYS
SERIES DESIGNATION CENTIGRID ESTABLISHED RELIABILITY RELAYS SENSITIVE DPDT 134 DPDT basic relay 134D 134DD RELAY TYPE DPDT relay with internal diode for coil transient suppression DPDT relay with internal
More informationMAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ
MAGNETIC-LATCHING DPDT HALF-SIZE CRYSTAL CAN HIGH POWER RF RELAY DC-3 GHZ SERIES RELAY TYPE Commercial, DPDT, High Power, Half-Size Crystal Can Relay Commercial, DPDT, High Power, Half-Size Crystal Can
More informationMAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT RELAY TYPE. DPDT relay with internal diode for coil transient suppression
ESTABLISHED RELIABILITY SERIES DESIGNATION MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS DPDT 420/422 DPDT basic relay 420D/422D 420DD/422DD RELAY TYPE DPDT relay with internal diode for coil transient
More informationTO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
More informationTO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
More informationMAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS
MAGNETIC-LATCHING ESTABLISHED RELIABILITY TO-5 RELAYS SPDT SERIES 421 SERIES DESIGNATION RELAY TYPE 421 SPDT basic relay 421D 421DD SPDT relay with internal diode for coil transient suppression SPDT relay
More informationElectromechanical Relays Selection Guide
Electromechanical Relays Selection Guide Latching JAN Non-Latching RF Commercial Established Reliability Surface-Mount Attenuated Environmental Switching Solutions Teledyne Relays has been the world s
More informationElectromechanical Relays Selection Guide
Electromechanical Relays Selection Guide Latching JAN Non-Latching RF DC - GHz Established Reliability Loopback PST Environmental Attenuated Switching Solutions Teledyne Relays has been the world s innovative
More informationElectromechanical Relays Selection Guide
Electromechanical Relays Selection Guide Latching JAN Non-Latching RF Loopback Established Reliability PST Surface-Mount Environmental Attenuated Switching Solutions Teledyne Relays has been the world
More informationDistributed by: www.jameco.com 1-8-81-44 The content and copyrights of the attached material are the property of its owner. SLIM POLARIZED RELAY TN RELAYS.551. 9.8.86 FEATURES Small header area makes higher
More information1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
More informationSMALL POLARIZED RELAY WITH HIGH SENSITIVITY
TESTING SMALL POLAIZED ELA WITH HIGH SENSITIVIT TF-ELAS. 9..7 mm inch FEATUES High sensitivity: 8 power (Single side stable - V type) Surge withstand: V FCC Part 68 Minimal magnetic interference allows
More informationSeries HR255/HR257 DC up to 3 GHz Magnetic Latching Space Grade DPDT Relay
PART NUMBER HR255, HR257 DESCRIPTION Magnetic-Latching, DPDT, Half-Size Crystal Can, Space Grade Relay (HIREL) Teledyne Relays HR255/257 Series relay is a High Reliability Off-The Shelf (COTS) relay suitable
More informationULTRA LOW PROFILE 2 A POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTRA LOW PROFILE POLARIZED RELAY RELAYS 9...7 mm inch FEATURES Low profile mm.7 inch height High contact capacity: Surge withstand between contact and coil:, V (Telcordia) RoHS Directive compatibility
More information4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK RoHS compliant FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).34(W).7(H). High contact capacity: A 3. Outstanding
More information1.5 GHz MICROWAVE RELAYS. FEATURES 1. Excellent high frequency characteristics. V.S.W.R. (Max.) 1.5 (at 900 MHz) Impedance
1.5 GHz MICROWAVE RELAYS RK RELAYS RoHS compliant FEATURES 1. Excellent high frequency characteristics V.S.W.R. () 1.5 (at 9 MHz) Impedance 5Ω Impedance 75Ω Insertion loss (db. ) Isolation (db. ) V.S.W.R.
More informationTable of Contents. Kilovac Time Delay Relays
Table of Contents 1600/1700 Series, Delay on Operate, Fixed & Adjustable......................8-2, 8-3 2400 Series, Subminiature, Delay on Operate, Fixed.............................8-4 5600/5700 Series,
More informationAXICOM Telecom-, Signal and RF Relays. D2n V23105 Relay Nov. 07 Rev A ECOC: JM10
108-98007 Nov. 07 Rev A ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More informationPOST REFLOW HEIGHT DIMENSIONS
MEDER electronic RM Series 4 input / 2 output DESRIPTION The RM05-4A-S-4/2 and RM05-2A2B-S-4/2 are low-profile 4 input / 2 output Relay Modules with an FR-4 substrate and rugged thermoset epoxy overmold.
More informationIntroducing. CII FCA-150 Series Relay 50 Amps, 1PST/NO (DM) CII FCAC-150 Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts
Introducing CII Series Relay 50 Amps, 1PST/NO (DM) CII Series Relay 50 Amps, 1PST/NO (DM) with 1PDT Auxiliary Contacts Key Features Non-latching relay Balanced force design Corrosion protected metal enclosure
More informationSeries HR422/ HRS422 DC up to 1 GHz Magnetic Latching Space Grade DPDT Relay
PART NUMBER HR422 DESCRIPTION Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL) HRS422 Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL), Surface Mount J-Leads Teledyne Relays HR/HRS422 Series
More informationCP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
More information4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).4(W).7(H). High contact capacity: A. Outstanding surge resistance
More informationLOW PROFILE 2 FORM C RELAY TQ RELAYS Ð Ð.008. mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC. 200 mw.
LOW PROFILE FORM C RELA RELAS 9.3 6.7.. Ð Ð.8. 9.3. Ð Ð.8 mm inch FEATURES High sensitivity: Form C: power consumption (single side stable type) Form C: power consumption (single side stable type) Surge
More informationSeries HR412K/ HRS412K DC up to 1 GHz, High Shock Non-Latching Space Grade DPDT Relay
Series HR412K/ HRS412K PART NUMBER HR412K HRS412K DESCRIPTION Non-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock Non-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock, Surface Mount
More informationAXICOM Telecom-, Signal and RF Relays. FX2 Relay Nov. 07 Rev. E ECOC: JM10
108-98003 Nov. 07 Rev. E ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More informationPAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 XXX 10X. (All dimensions are in mm [inches]) R 516 _ 1 0 _
PAGE 1/6 ISSUE 15-10-18 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
More informationNew pin layout (LT type) added. Best seller with broad lineup and AC 2000 V breakdown voltage.
Compliance with RoHS Directive FEATURES. 2, V breakdown between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown of 2, V between contact and
More informationSeries CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
More informationSeries HR422K/ HRS422K DC up to 1 GHz, High Shock Magnetic Latching Space Grade DPDT Relay
PART NUMBER HR422K DESCRIPTION Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock HRS422K Magnetic-Latching, DPDT, TO-5 Space Grade Relay (HIREL), High Shock, Surface Mount J-Leads Teledyne
More informationDistributed by: www.jameco.com 188314242 The content and copyrights of the attached material are the property of its owner. S 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS 28. 1.12 12..472
More informationRK RELAYS FEATURES. SPECIFICATIONS Contact. 1.5 GHz MICROWAVE RELAY
. GHz MICROWAVE RELAY RK RELAYS..79.. 9.7.3 mm inch FEATURES Excellent high frequency characteristics (Impedance 7Ω) Isolation: db (at. GHz) Insertion loss:.db (at 9 MHz) :. (at 9MHz) High sensitivity
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
More informationDPDT MJN2CF-IN* MJN2C-IN 3PDT MJN3CF-IN* MJN3C-IN Latching Plug-in DPDT MJN2CK
General Purpose Relay MJN Relay with Plug-in Termination, available in SPDT, DPDT or 3PDT models Rugged power driver offers superior 3/16 through-air and 3/8 over-surface spacing Interlocked frame and
More informationTable of Contents. CII Mid-Range Relays
Table of Contents TD2 Series Time Delay Relays, per MIL-PRF-83726/28, /29, /30, & /31..........5-2 5-5 Double-pole, Electrically Held, 5 mps and Less FC-205 Series.................................................5-6
More informationSeries CCT-38S Multi-Throw DC 12 GHz, SP7T & SP8T Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S PART NUMBER CCT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-12 GHz The CCT-38S is a broadband, multi-throw, electromechanical coaxial switch designed to switch
More informationElectromechanical Relays - Frequently Asked Questions
Electromechanical Relays - Frequently Asked Questions Q: What is the contact carry rating? A: Our EMR are capable of hot switching 28W load plus 100 cycles of overload condition at 56W. Therefore at a
More informationCoaxial Switch. Ordering Information. High-frequency, High-capacity Coaxial Switch Supporting Bandwidth to 26.5 GHz. Model Number Legend:
Coaxial Switch High-frequency, High-capacity Coaxial Switch Supporting Bandwidth to 26.5 GHz Models supporting bandwidth of 26.5 GHz achieve superior high-frequency characteristics, such as an isolation
More informationSeries CCR-39S/CR-39S Multi-Throw DC-18 GHz/DC-22 GHz Latching Coaxial Switch
PART NUMBER CCR-39S CR-39S DESCRIPTION Commercial Latching Multi-throw, DC-8GHz Elite Latching Multi-throw, DC-22GHz The CCR-39S/CR-39S is a broadband, multi-throw, electromechanical coaxial switch designed
More informationSURFACE MOUNT HIGH FREQUENCY, ACTIVE RF SWITCH SPDT
SURFACE MOUNT HIGH FREQUENCY, ACTIVE RF SWITCH SPDT SERIES InP1012 Solid State, InP-HEMT Active RF Switch DESCRIPTION The InP1012-40 is a highly compact, reflective SPDT Active RF switch, manufactured
More informationSeries CCP-32N Low PIM DC 3 GHz Latching SPDT Coaxial Switch
COAX SWITCHES Series CCP-32N PART NUMBER CCP-32N DESCRIPTION Commercial Latching SPDT, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth
More informationSeries CCT-58S/CT-58S Multi-Throw DC-26.5 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-58S/CT-58S PART NUMBER CCT-58S CT-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-26.5GHz Elite Normally Open Multi-throw, DC-26.5GHz The CCT-58S/CT-58S is an internally
More informationCompact Relay Family with Forcibly Guided Contacts
Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES. Forcibly guided contact structure Relay
More informationLimiter Diodes Features Description Chip Dimensions Model DOT Diameter (Typ.) Chip Number St l Style Inches 4 11
Features Low Loss kw Coarse Limiters 200 Watt Midrange Limiters 10 mw Clean Up Limiters 210 20 Description Alpha has pioneered the microwave limiter diode. Because all phases of manufacturing, from design
More informationSeries CCT-38S/CT-38S Multi-Throw DC 18 GHz/DC-22 GHz Normally Open Coaxial Switch
COAX SWITCHES Series CCT-38S/CT-38S PART NUMBER CCT-38S CT-38S DESCRIPTION Commercial Normally Open Multi-throw, DC-18GHz Elite Normally Open Multi-throw, DC-22GHz The CCT-38S/CT-38S is an internally terminated,
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
More informationPCB Footprint Max.Load Coil Voltage Non-Latching part number Single-coil latching part number Standard ground terminal (1GHz)
High Frequency Relay G6K-RF Surface Mount, 1GHz / 3 GHz Miniature DPDT, High Frequency Relay New Models with 3 GHz band available ( -T versions) Space-saving 1 GHz version with smaller ground terminal
More informationSeries CCT-59S/CT-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch
PART NUMBER CCT-59S CT-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCT-59S/CT-59S is an Internally Terminated broadband, multi-throw, electromechanical
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
More informationSeries CCS-37K/CS-37K Miniature DC 36 GHz Latching TRANSFER Coaxial Switch
PART NUMBER CCS-37K CS-37K DESCRIPTION Commercial Latching TRANSFER, DC-36GHz Elite Latching TRANSFER, DC-36GHz The CCS-37K/CS-37K is a long-life high performance transfer switch designed for use in 50
More informationRAMSES SERIES R 570 PART NUMBER SELECTION. SPDT up to 18 GHz. Our Most Important Connection is with You. N - TNC - BNC
SPDT up to 18 GHz PART NUMBER SELECTION Frequency Range: 0: N up to 3 GHz 1: N up to 12.4 GHz 2: BNC up to 3 GHz 5: TNC up to 3 GHz 6: TNC up to 12.4 GHz D: TNC up to 18 GHz Type: 1: Failsafe 2: Failsafe
More informationSeries CCRS-33S/CRS-33S Miniature DC 18 GHz Failsafe 2P3T Coaxial Switch
COAX SWITCHES Series CCRS-33S/CRS-33S PART NUMBER CCRS-33S CRS-33S DESCRIPTION Commercial Failsafe 2P3T, DC-18GHz Elite Failsafe 2P3T, DC-18GHz The CCRS-33S/CRS-33S is a broadband, 2P3T, electromechanical
More informationPAGE 1/12 ISSUE SERIES DP3T/SPDT PART NUMBER R595 XXX XXX
PAGE 1/12 ISSUE 22-06-2018 SERIES DP3T/SPDT PART NUMBER R595 XXX XXX DP3T-SPDT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall s PLATINUM SERIES switches are optimised
More informationLOW-PROFILE SURFACE-MOUNT RELAY
TESTING LOW-PROFILE SURFACE-MOUNT RELAY TQ SMD RELAYS.6. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6. mm.6 inch) Tape and reel
More informationHIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY
HIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY SX RELAYS (ASX) 1. FEATURES 1. High contact reliability over a long life has been made possible for low level loads. Using a low level
More informationHigh Sensitivity, with 100mW nominal operating power, in a compact and space saving case
High Sensitivity, with mw nominal operating, in a compact and space saving case GN RELAYS (AGN) RoHS compliant FEATURES. Compact slim body saves space Thanks to the small surface area of.7 mm.6 mm.4 inch.47
More informationClass Sealing Fully sealed Contact configuration Rated coil voltage Model Basic Type SPDT 4.5 VDC G6Y-1 5 VDC 9 VDC 12 VDC 24 VDC
Switching Structure Based on the Micro Strip Line is Used to Combine High Performance and Costeffectiveness ROHS compliant. Isolation characteristics of 65 db or better at 900 MHz. Effective insertion
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
More information4 AMP POLARIZED HIGH DENSITY RELAY WITH HIGH SENSITIVITY FEATURES
4 AMP POLARIZED HIH DENSITY RELAY WITH HIH SENSITIVITY SRELAYS FEATURES 28. 1...472 1.4.49 mm inch A variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available
More informationMINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
More informationUP TO 8GHz SMALL MICROWAVE RELAYS
RJ (RJ) UP TO 8GHz SMLL MICROWVE RELYS RJ RELYS (RJ) RoHS compliant FETURES Excellent high frequency characteristics (Ω, at GHz) V.S.W.R.: Max. 1.2 Insertion loss: Max..dB Isolation: Min. 3dB (Between
More informationHMC241AQS16 / 241AQS16E
v00.1213 Typical Applications Features The HMC241AQS16 & HMC241AQS16E are ideal for: Base Stations & Portable Wireless CATV / DBS Wireless Local Loop Test Equipment Functional Diagram RoHS Compliant Product
More informationMT4 Relay. 4 pole telecom/signal relay Through Hole Type (THT) Non-polarized. non-latching 1 coil. Features. Typical applications
4 pole telecom/signal relay Through Hole Type (THT) Non-polarized. non-latching 1 coil Features Telecom/signal relay (dry circuit, test access, ringing) 20 x 14.8 mm, 0.795 x 0.582 inch Switching current
More informationRelay Types. Reed V23100-V4 Relay. Typical applications. Features. DIP version (flat) DIP version (high) SIL version.
1 and 2 pole relays non-polarized, non-latching ROHS compliant (Directive 2002/95/EC) as per product date code 0501. Features Direct coil control with TTL-signals possible Highly reliable switching High
More informationHIGH INSULATION RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003))
TESTING HIGH INSULATI RELAYS (Conforming to the supplementary insulation class of EN Standards (EN)) TX-D RELAYS.9.9 8...9.9 8.. FEATURES Approved to the supplementary insulation class in the EN standards
More informationSeries CCP-47N Low PIM DC 3 GHz Latching TRANSFER Coaxial Switch
COAX SWITCHES Series CCP-47N PART NUMBER CCP-47N DESCRIPTION Commercial Latching TRANSFER, DC-3GHz, Low PIM These switches are designed to have extremely low passive intermodulation for use in narrow bandwidth
More informationSeries CCS-19 Multi-Throw DC-2 GHz Latching Coaxial Switch
PART NUMBER CCS-19 CS-19 DESCRIPTION Commercial Latching Multi-throw, DC-2GHz, with N or TNC connectors Elite Latching Multi-throw, DC-2GHz, with N or TNC connectors The CCS-19/CS-19 is a broadband, multi-throw,
More informationFeatures. = +25 C, Vcc = +5V [1]
Typical Applications Low Noise wideband MMIC VCO is ideal for: Features Wide Tuning Bandwidth Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Pout:
More informationPAGE 1/6 ISSUE Jul SERIES Micro-SPDT PART NUMBER R516 XXX 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE Jul-24-2017 SERIES Micro-SPDT PART NUMBER R516 XXX 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT
More informationSMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
More informationSeries HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay
Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with
More informationFMSW6129 DATA SHEET. SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA.
SP4T Normally Open Electro-Mechanical Relay Switch From DC to 22 GHz, 20 Watts with Indicators, TTL, Diodes, SMA The FMSW6129 is an SP4T Electromechanical Relay Switch that operates over a wide frequency
More informationDistributed by: www.jameco.com -8-83-44 The content and copyrights of the attached material are the property of its owner. D HIGHLY ENITIVE 5 V FCC URGE WITHTANDING INIATURE RELAY D RELAY D4E 35.4.387
More informationSeries CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Latching SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Latching SPDT, DC-18GHz, Internal 50Ω Termination Elite Latching SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
More information8W Wide Band Power Amplifier 1GHz~22GHz
8W Wide Band Power Amplifier 1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 50 db Typical Psat: +39 dbm Supply Voltage: +36V Electrical Specifications, T A = +25⁰C Typical Applications
More informationHigh breakdown voltage type is available (1.5 kv between open contacts)
TESTING High type is available (.5 kv between open contacts) TX-D RELAYS New Compliance with RoHS Directive FEATURES. Lineup now includes high type that achieves between open contacts of,5 V AC. between
More informationSeries CCRT-33S/CRT-33S Internal 50Ω Termination DC 18 GHz/DC-22 GHz Failsafe SPDT Coaxial Switch
COAX SWITCHES Series CCRT-33S/CRT-33S PART NUMBER CCRT-33S CRT-33S DESCRIPTION Commercial Failsafe SPDT, DC-18GHz, Internal 50Ω Termination Elite Failsafe SPDT, DC-22GHz, Internal 50Ω Termination The CCRT-33S/CRT-33S
More informationTITANIUM SERIES R 51 PART NUMBER SELECTION. High Performance Multiport Switches. Our Most Important Connection is with You.
PART NUMBER SELECTION Models: 2: Without 50 Ω terminations 4: With 50 Ω terminations RF Connectors: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (1) Radiall s TITANIUM
More informationClassification Contact form Contact type Contact material Enclosure Rating Model Standard DPDT Bifurcated crossbar Ag (Au alloy) Fully sealed G5V-2
Miniature Relay for Signal Circuits ROHS compliant. Wide switching power of 10 µa to 2 A. High dielectric strength coil-contacts:1,000 VAC; open contacts: 750 VAC. Conforms to FCC Part 68 requirements.
More informationSURFACE MOUNT HIGH FREQUENCY, ACTIVE RF SWITCH SPDT
Series InP112 SPDT 3kHz - 3GHz Active RF Switch SURFACE MOUNT HIGH FREQUENCY, ACTIVE RF SWITCH SPDT SERIES InP112 Solid State, InP-HEMT RF Switch DESCRIPTION The InP112 is a highly compact, reflective
More informationFeatures. = +25 C, Vcc = +5V
Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationSeries CCS-37S/CS-37S Miniature DC 18 GHz Failsafe TRANSFER Coaxial Switch
COAX SWITCHES Series CCS-37S/CS-37S PART NUMBER CCS-37S CS-37S DESCRIPTION Commercial Failsafe TRANSFER, DC-8GHz Elite Failsafe TRANSFER, DC-8GHz The CCS-37S/CS-37S is a long-life high performance transfer
More information30W Solid State High Power Amplifier 2-6 GHz. Parameter Min. Typ. Max. Min. Typ. Max. Units
7-3 RF-LAMBDA 30W Solid State High Power Amplifier 2-6 GHz Features Wideband Solid State Power Amplifier Psat: +45dBm Gain: 50dB Supply Voltage: +36V Electrical Specifications, T A = +25⁰C, Vcc = +36V
More informationSeries CCR-58S/CR-58S Multi-Throw DC 26.5 GHz Normally Open Coaxial Switch
PART NUMBER CCR-58S CR-58S DESCRIPTION Commercial Normally Open Multi-throw, DC-6.5GHz Elite Normally Open Multi-throw, DC-6.5GHz The CCR-58S/CR-58S is a broadband, multi-throw, electromechanical coaxial
More informationAN-B21C-0004 Applications Note
Rev. A, 10/12/09 SD 2009 Coto Technology All Rights Reserved 1/10 B21C Relay Specification Data TEST PARAMETERS CONDITIONS 1,2 MIN NOM MAX UNITS COIL SPECIFICATIONS COIL RESISTANCE 140.0 155.0 170.0 Ω
More informationFMSW6097 DATA SHEET. SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA.
SPDT Failsafe Electro-Mechanical Relay Switch From DC to 26.5 GHz, 20 Watts with TTL, Diodes, Indicators, SMA The FMSW6097 is an SPDT Electromechanical Relay Switch that operates over a wide frequency
More informationSeries CCT-59S Multi-Throw DC-18 GHz, SP7T & SP8T Latching Coaxial Switch, Internal 50Ω Termination
COAX SWITCHES Series CCT-59S PART NUMBER CCT-59S DESCRIPTION Commercial Latching Multi-throw, DC-18GHz The CCT-59S is a broadband, multi-throw, electromechanical coaxial switch designed to switch a microwave
More informationPower PCB Relay. To Order: Select the part number and add the desired coil voltage rating (e.g., G6B-1114-US-DC6).
Power PCB Relay Subminiature 20 L x 9.90 W x 9.90 H mm (0.79 L x 0.39 W x 0.39 H in) Low power consumption (200 mw) Sealed construction permits automatic soldering and cleaning of the PC board High-capacity
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
More information4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz
4W Ultra Wide Band Power Amplifier 0.1GHz~22GHz Features Wideband Solid State Power Amplifier Gain: 40 db Typical Psat: +37 dbm Typical Noise Figure: 3dB Typical Supply Voltage: +24V (-NP) / +36V (-WP)
More informationAXICOM Telecom-, Signal and RF Relays. HF3 Relay Aug. 08 Rev. E ECOC: JM10
108-98000 Aug. 08 Rev. E ECOC: JM10 Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that
More information