REQUEST FOR INFORMATION

Transcription

1 Ardmore, PA Atlantic City, NJ REQUEST FOR INFORMATION PROJECT: Renaissance Hotel Renovations RFI NUMBER: 35.0 JONATHAN NEHMER & ASSOC ATTN: Lauren Maccherone Dacey 7361 Calhoun Place Suite 310 Rockville, MD phone fax Requested Date: Requested Contractor: Generated By: Response Due By: Response Received: 08/10/2017 T.N.Ward Company Kenneth Romano 08/15/ /11/2017 The required but unavailable information is resulting in a delay in fabrication of material or prosecution of the work in the field. Once the information is received we will advise you as to the impact to the schedule and cost Subject: Closet millwork need rough opening dimension Reference: Information Requested: Per updated A020, and the shop drawings (OFCI), both attached and highlithgt We are getting (3) three different rough openings sizes for the closet millwork. please review and update A020 drawing reflecting your finds. Response Requested By: Response: FF&E closet inserts are designed to be slightly larger than the closet opening and will be field cut by the installer to fit. Overall dinensions for door jamb J1 on A020 have been updated. See below and attached typical GR Closet: 42" inside dimension 42-3/4" FF&E closet dimension per shops Penthouse Closet: 64" inside dimension 64-5/8" FF&E closet dimension per shops Parlor Cloest: 35-1/2" inside dimension 36" FF&E closet dimension per shops A020 will be issued in the next Addendum

2 Ardmore, PA Atlantic City, NJ Request CCs: Response CCs:

3 Ardmore, PA Atlantic City, NJ REQUEST FOR INFORMATION PROJECT: Renaissance Hotel Renovations RFI NUMBER: 35.0 JONATHAN NEHMER & ASSOC ATTN: Lauren Maccherone Dacey 7361 Calhoun Place Suite 310 Rockville, MD phone fax Requested Date: Requested Contractor: Generated By: Response Due By: Response Received: 08/10/2017 T.N.Ward Company Kenneth Romano 08/15/2017 The required but unavailable information is resulting in a delay in fabrication of material or prosecution of the work in the field. Once the information is received we will advise you as to the impact to the schedule and cost Subject: Closet millwork need rough opening dimension Reference: Information Requested: Per updated A020, and the shop drawings (OFCI), both attached and highlithgt We are getting (3) three different rough openings sizes for the closet millwork. please review and update A020 drawing reflecting your finds. Response Requested By: Response: FF&E closet inserts are designed to be slightly larger than the closet opening and will be field cut by the installer to fit. Overall dimensions for door jamb J1 on A020 have been updated. See below and attached. Request CCs: Response CCs: Typical GR Closet: 42" inside dimension 42-3/4" FF&E closet dimension per shops Penthouse Closet: 64" inside dimension 64-5/8" FF&E closet dimension per shops Parlor Closet: 35-1/2" inside dimension 36" FF&E closet dimension per shops A020 will be issued in the next Addendum.

4 6 5 DOOR JAMB J1 4 DOOR HEAD & JAMB DETAILS A020 3" = 1'-0"

5 DOOR HEAD H1 5 Revised A020. See previous page. DOOR JAMB J1 4 DOOR HEAD & JAMB DETAILS A020 3" = 1'-0"

6 Revised A020 to be 42"

7 Revised A020 to be 64"

8 Revised A020 to be 42"

9 Revised A020 to be 42"