STGB19NC60HDT4, STGF19NC60HD, STGP19NC60HD, STGW19NC60HD

Size: px

Start display at page:

Download "STGB19NC60HDT4, STGF19NC60HD, STGP19NC60HD, STGW19NC60HD"

Adela Thomas
6 years ago
Views:

1 STGB19NC60HDT4, STGF19NC60HD, STGP19NC60HD, STGW19NC60HD 19 A, 600 V, very fast IGBT with ultrafast diode Features Datasheet - production data TAB TAB 3 1 D²PAK TO-220FP Low on-voltage drop (V CE(sat) ) Very soft ultrafast recovery anti-parallel diode Applications High frequency motor drives SMPS and PFC in both hard switch and resonant topologies TO TO-247 Figure 1. Internal schematic diagram Description These devices are ultrafast IGBT. They utilize the advanced Power MESH process resulting in an excellent trade-off between switching performance and low on-state behavior. Table 1. Device summary Part numbers Marking Package Packing STGB19NC60HDT4 GB19NC60HD D²PAK Tape and reel STGF19NC60HD GF19NC60HD TO-220FP Tube STGP19NC60HD GP19NC60HD TO-220 Tube STGW19NC60HD GW19NC60HD TO-247 Tube September 2016 DocID12819 Rev 10 1/23 This is information on a product in full production.

2 Contents STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Contents 1 Electrical ratings Electrical characteristics Electrical characteristics (curves) Test circuits Package information D²PAK (TO-263) package information TO-220FP package information TO-220 package information TO-247 package information Packing information Revision history /23 DocID12819 Rev 10

3 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220 D²PAK TO-220FP TO-247 Unit V CES Collector-emitter voltage (V GE = 0) 600 V I C (1) I C (1) (2) I CL (3) I CP I F Continuous collector current at T C = 25 C Continuous collector current at T C = 100 C 2. V clamp = 80%V CES, T J = 150 C, R G =1 0 Ω, V GE = 15 V A A Turn-off latching current 40 A Pulsed collector current 60 A Diode RMS forward current at T C = 25 C 20 A I FSM Surge not repetitive forward current t p =10 ms sinusoidal 50 A V GE Gate-emitter voltage ±20 V P TOT Total dissipation at T C = 25 C W V ISO T STG T j Isolation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; T C = 25 C) Storage temperature range Operating junction temperature range 1. Calculated according to the iterative formula: T jmax ( ) T C I C ( T C ) = R thj c V CE( sat) ( max) T jmax ( ( ), I C ( T C )) 2500 V - 55 to 150 C 3. Pulse width limited by maximum permissible junction temperature and turn-off within RBSOA. Table 3. Thermal data Value Symbol Parameter TO-220 D²PAK TO-220FP TO-247 Unit R thj-case Thermal resistance junction-case diode C/W Thermal resistance junction-case IGBT C/W R thj-amb Thermal resistance junction-ambient C/W DocID12819 Rev 10 3/23 23

4 Electrical characteristics STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 2 Electrical characteristics (T J = 25 C unless otherwise specified) Table 4. Static Symbol Parameter Test conditions Min. Typ. Max. Unit V (BR)CES Collector-emitter breakdown voltage (V GE = 0) I C = 1 ma 600 V V GE = 15 V, I C = 12 A V CE(sat) Collector-emitter saturation voltage V GE = 15 V, I C = 15 A 2 V GE = 15 V, I C =30 A,T J =100 C 2.5 V GE = 15 V, I C =12 A,T J =125 C 1.6 V GE(th) Gate threshold voltage V CE = V GE, I C = 250 µa I CES I GES g fs (1) Collector cut-off current (V GE = 0) Gate-emitter leakage current (V CE = 0) 1. Pulsed: pulse duration = 300 µs, duty cycle 1.5% V CE = 600 V 150 µa V CE = 600 V,T J = 125 C 1 ma V GE = ±20 V ±100 na Forward transconductance V CE = 15 V, I C = 12 A 5 S V Table 5. Dynamic Symbol Parameter Test conditions Min. Typ. Max. Unit C ies Input capacitance C oes Output capacitance V CE = 25 V, f = 1 MHz, C res V GE = 0 Reverse transfer capacitance Q g Total gate charge Q ge Gate-emitter charge V CE = 390 V, I C = 5 A, V GE = 15 V, (see Figure 20) Q gc Gate-collector charge pf nc 4/23 DocID12819 Rev 10

5 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Electrical characteristics Table 6. Switching on/off (inductive load) Symbol Parameter Test conditions Min. Typ. Max. Unit t d(on) Turn-on delay time V CC = 390 V, I C = 12 A t r Current rise time R G = 10 Ω, V GE = 15 V ns (di/dt) on Turn-on current slope (see Figure 21) A/µs t d(on) Turn-on delay time V CC = 390 V, I C = 12 A ns t R G = 10 Ω, V GE = 15 V, r Current rise time T J = 125 C (di/dt) on Turn-on current slope (see Figure 21) A/µs t r(voff) Off voltage rise time V CC = 390 V, I C = 12 A t d(voff) Turn-off delay time R G = 10 Ω, V GE = 15 V, ns t f Current fall time (see Figure 21) t r(voff) Off voltage rise time V CC = 390 V, I C = 12 A t d(voff) Turn-off delay time R G = 10 Ω, V GE = 15 V, T J = 125 C ns t f Current fall time (see Figure Table 7. Switching energy (inductive load) Symbol Parameter Test conditions Min. Typ. Max. Unit E on E (1) off E ts Turn-on switching energy Turn-off switching energy Total switching energy V CC = 390 V, I C = 12 A R G = 10 Ω, V GE = 15 V, (see Figure E on Turn-on switching energy V CC = 390 V, I C = 12 A (1) E R G = 10 Ω, V GE = 15 V, off Turn-off switching energy T J = 125 C E ts Total switching energy (see Figure µj µj 1. Including the tail of the collector current. DocID12819 Rev 10 5/23 23

6 Electrical characteristics STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Table 8. Collector-emitter diode Symbol Parameter Test conditions Min. Typ. Max. Unit V F Forward on-voltage I F = 12 A I F = 12 A, T J = 125 C V t rr Reverse recovery time I F = 12 A, V R = 40 V, ns Q rr Reverse recovery charge di/dt = 100 A/µs nc I rrm Reverse recovery current (see Figure 22) A t rr Reverse recovery time I F = 12 A, V R = 40 V, ns Q rr Reverse recovery charge T J =125 C, di/dt = 100 A/µs nc I rrm Reverse recovery current ((see Figure 22) A 6/23 DocID12819 Rev 10

7 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Transfer characteristics Figure 4. Transconductance Figure 5. Collector-emitter on voltage vs. temperature Figure 6. Gate charge vs. gate-source voltage Figure 7. Capacitance variations DocID12819 Rev 10 7/23 23

8 Electrical characteristics STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Figure 8. Normalized gate threshold voltage vs. temperature Figure 9. Collector-emitter on voltage vs. collector current Figure 10. Normalized breakdown voltage vs. temperature Figure 11. Switching energy vs. temperature Figure 12. Switching energy vs. gate resistance Figure 13. Switching energy vs. collector current 8/23 DocID12819 Rev 10

9 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Electrical characteristics Figure 14. Turn-off SOA Figure 15. Thermal impedance for TO-247 Figure 16. Thermal impedance for TO-220, D²PAK Figure 17. Thermal impedance for TO-220FP Figure 18. Forward voltage drop vs. forward current I FM(A) T j=125 C (typical values) T j=125 C (maximum values) T j=25 C (maximum values) V FM(V) DocID12819 Rev 10 9/23 23

10 Test circuits STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 3 Test circuits Figure 19. Test circuit for inductive load switching Figure 20. Gate charge test circuit Figure 21. Switching waveform Figure 22. Diode recovery time waveform 10/23 DocID12819 Rev 10

11 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 4.1 D²PAK (TO-263) package information Figure 23. D²PAK (TO-263) type A package outline DocID12819 Rev 10 11/23 23

12 Package information STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Table 9. D²PAK (TO-263) type A mechanical data Dim. mm Min. Typ. Max. A A b b c c D D D E E E e 2.54 e H J L L L R 0.4 V /23 DocID12819 Rev 10

13 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Package information Figure 24. D²PAK (TO-263) recommended footprint (dimensions are in mm) DocID12819 Rev 10 13/23 23

14 Package information STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 4.2 TO-220FP package information Figure 25. TO-220FP package outline _Rev_K_B 14/23 DocID12819 Rev 10

15 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Package information Table 10. TO-220FP package mechanical data Dim. mm Min. Typ. Max. A B D E F F F G G H L2 16 L L L L L Dia DocID12819 Rev 10 15/23 23

16 Package information STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 4.3 TO-220 package information Figure 26. TO-220 type A package outline 16/23 DocID12819 Rev 10

17 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Package information Table 11. TO-220 type A mechanical data Dim. mm. Min. Typ. Max. A b b c D D E e e F H J L L L L P Q DocID12819 Rev 10 17/23 23

18 Package information STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 4.4 TO-247 package information Figure 27. TO-247 package outline 18/23 DocID12819 Rev 10

19 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Package information Table 12. TO-247 package mechanical data Dim. mm. Min. Typ. Max. A A b b b c D E e L L L P R S DocID12819 Rev 10 19/23 23

20 Packing information STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 5 Packing information Figure 28. D²PAK (TO-263) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T Top cover tape P0 D P2 E K0 B0 F W A0 P1 D1 User direction of feed R User direction of feed Bending radius AM08852v2 20/23 DocID12819 Rev 10

21 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD Packing information REEL DIMENSIONS Figure 29. D²PAK (TO-263) reel outline T 40mm min. Access hole At sl ot location B D C A N Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Table 13. D²PAK (TO-263) tape and reel mechanical data Tape Reel Dim. mm. mm. Dim. Min. Max. Min. Max. A A 330 B B 1.5 D C D D 20.2 E G F N 100 K T 30.4 P P Base qty 1000 P Bulk qty 1000 R 50 T W DocID12819 Rev 10 21/23 23

22 Revision history STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD 6 Revision history Table 14. Document revision history Date Revision Changes 02-Nov Initial release. 05-Jan Complete version. 01-Jul Modified: Table 2: Absolute maximum ratings. Inserted new packages, mechanical data: TO-220FP, TO Oct V ISO inserted in Table 2 for TO-220FP. 15-May Updated I CP value. 19-May Updated: mechanical data for TO-220FP. 24-Nov Dec Updated Table 4: Static. 02-Sep Sep Inserted new order code STGWA19NC60HD in TO-247 long leads package. Removed order code STGWA19NC60HD in TO-247 long leads package. Added Section 5.2: TO-247 package information. Minor text changes. 22/23 DocID12819 Rev 10

23 STGB19NC60HDT4,STGF19NC60HD,STGP19NC60HD,STGW19NC60HD IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved DocID12819 Rev 10 23/23 23

STGB20NC60V, STGP20NC60V, STGW20NC60V

STGB20NC60V, STGP20NC60V, STGW20NC60V 30 A - 600 V - very fast IGBT Features Datasheet - production data High frequency operation up to 50 khz Lower C RES / C IES ratio (no cross-conduction susceptibility)