Features. Description. Table 1. Device summary. Order code Marking Package Packing. MJD32CT4-A MJD32C DPAK Tape and reel

Transcription

1 Automotive-grade low voltage PNP power transistor Features Datasheet - production data TAB AEC-Q101 qualified Surface-mounting TO-252 power package in tape and reel Complementary to the NPN type MJD31CT4-A DPAK 1 3 Applications General purpose linear and switching equipment Description Figure 1. Internal schematic diagram The device is manufactured in planar technology with base island layout. The resulting transistor shows exceptional high gain performance coupled with very low saturation voltage. Table 1. Device summary Order code Marking Package Packing MJD32CT4-A MJD32C DPAK Tape and reel January 2018 DocID13576 Rev 5 1/14 This is information on a product in full production.

2 Contents MJD32CT4-A Contents 1 Electrical ratings Electrical characteristics Electrical characteristics (curves) Test circuits Package information DPAK (TO-252) type A package information DPAK (TO-252) packing information Revision history /14 DocID13576 Rev 5

3 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCBO Collector-base voltage (I E = 0) -100 V VCEO Collector-emitter voltage (I B = 0) -100 V VEBO Emitter-base voltage (I C = 0) -5 V I C Collector current -3 A I CM Collector peak current -5 A I B Base current -1 A P TOT Total dissipation at T c = 25 C 15 W T stg T j Storage temperature range Operating junction temperature range -65 to 150 C Table 3. Thermal data Symbol Parameter Value Unit R thj-case Thermal resistance junction-case 8.3 C/W R (1) thj-pcb Thermal resistance junction-pcb 50 C/W 1. When mounted on a 1-inch² FR-4 board, 2oz Cu DocID13576 Rev 5 3/14 14

4 Electrical characteristics MJD32CT4-A 2 Electrical characteristics T case =25 C unless otherwise specified. Table 4. On/off states Symbol Parameter Test conditions Min. Typ. Max. Unit I CES I CEO I EBO V CEO(sus) Collector cut-off current (V BE = 0) Collector cut-off current (I B = 0) Emitter cut-off current (I C = 0) Collector-emitter sustaining voltage (I B = 0) V CE = V µa V CB = - 60 V µa V EB = - 5 V ma I C = - 30 ma V V (1) Collector-emitter CE(sat) I C = - 3 A, I B = ma V saturation voltage V BE(on) Base-emitter on voltage I C = - 3 A, V CE = - 4 V V h FE DC current gain 1. Pulse test: pulse duration 300 µs, duty cycle 2% I C = - 1 A, V CE = - 4 V 25 - I C = - 3 A, V CE = - 4 V /14 DocID13576 Rev 5

5 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain (V CE = - 2 V) Figure 5. DC current gain (V CE = - 4 V) Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage DocID13576 Rev 5 5/14 14

6 Electrical characteristics MJD32CT4-A Figure 8. Base-emitter on voltage Figure 9. Resistive load switching time (on) Figure 10. Resistive load switching time (off) 6/14 DocID13576 Rev 5

7 Test circuits 3 Test circuits Figure 11. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor Figure 12. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier DocID13576 Rev 5 7/14 14

8 Package information MJD32CT4-A 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. 4.1 DPAK (TO-252) type A package information Figure 13. DPAK (TO-252) type A package outline 8/14 DocID13576 Rev 5

9 Package information Table 5. DPAK (TO-252) type A mechanical data Dim. mm Min. Typ. Max. A A A b b c c D D E E e e H L (L1) L L R 0.20 V2 0 8 DocID13576 Rev 5 9/14 14

10 Package information MJD32CT4-A Figure 14. DPAK (TO-252) type A recommended footprint (dimensions are in mm) 10/14 DocID13576 Rev 5

11 Package information 4.2 DPAK (TO-252) packing information Figure 15. DPAK (TO-252) tape outline DocID13576 Rev 5 11/14 14

12 Package information MJD32CT4-A Figure 16. DPAK (TO-252) reel outline Table 6. DPAK (TO-252) tape and reel mechanical data Tape Reel Dim. mm mm Dim. Min. Max. Min. Max. A A 330 B B 1.5 B C D D 20.2 D1 1.5 G E N 50 F T 22.4 K P Base qty P Bulk qty P R 40 T W /14 DocID13576 Rev 5

13 Revision history 5 Revision history Table 7. Document revision history Date Revision Changes 01-Jun First release 09-Nov Updated package mechanical data. 14-Jan Modified Table 3 on page Jun Modified: mechanical data updated 24-Jan Modified title. Modified features on cover page. Updated Section 4: Package information. Minor text changes. DocID13576 Rev 5 13/14 14

14 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved 14/14 DocID13576 Rev 5