Precision Wide Bandwidth Analog Switches
|
|
- Abel Barber
- 6 years ago
- Views:
Transcription
1 PA3A PA3A/33A/3A Precision Wide Bandwidth Analog Switches Features Single-Supply Operation (+2 to +6) Rail-to-Rail Analog Signal Dynamic Range ow On-Resistance (Ω typ with supply) Minimizes Disttion and Err oltages R Matching Between hannels,.9 Ω typ On-Resistance Flatness, 3Ω typ ow harge njection Reduces Glitch Errs. Q = 7p typ High Speed. t = ns typ ery Good Off-solation: MHz Wide -3dB Bandwidth: 23 MHz High-urrent hannel apability: >ma TT/MOS ogic ompatible ow Power onsumption (.µw typ) Pin-compatible with DGX, MAX3X Applications Audio, ideo Switching and Routing Battery-Powered ommunication Systems omputer Peripherals Telecommunications Ptable nstrumentation Replaces Mechanical Relays Description The PA3/33/3A are dual monolithic analog switches designed f single-supply operation. These high-precision devices are ideal f low-disttion audio, video signal switching and routing. The PA3 is a dual single-pole single-throw (SPST), nmally open (NO) switch. The PA33 is a dual single-pole double-throw (SPDT) switch. The PA3 is a dual doublepole single-throw (DPST), nmally open (NO) function. Each switch conducts current equally well in either direction when on. When off they block voltages up to the power-supply rails. The PA3/33/3 are fully specified with, and +3.3 supplies. With, they guarantee <Ω on-resistance. Onresistance matching between channels is within 2Ω. Onresistance flatness is less than Ω over the specified range. The PA3X family guarantees fast switching speeds (t < ns). These products are available in the 6-pin narrow-body SO, QSOP, and PDP packages f operation over the industrial (- o to + o ) temperature range. Functional Diagram, Pin onfigurations and Truth Tables 6 NO N N N 6 N NO2 Switches shown f ogic input = Nmally losed, NO = Nmally Open, N = Not internally onnected ogic PA3A Switc h ogic SW, SW2 SW3, SW ogic Switc h 32 PS762D 7//9
2 PA3A Absolute Maximum Ratings oltages Referenced to.... to +7,,, NO (Note ).... to mA, whichever occurs first urrent (any terminal except, NO, )... 3mA urrent,, NO,... ma (pulsed at ms, % duty cycle)... 2mA Thermal nfmation ontinuous Power Dissipation PDP (derate.mw/º above 7º)... mw Narrow SO & QSOP (derate.7mw/º above +7º)... 6mW Stage Temperature... -6º to +º ead Temperature(soldering, s)... +3º Note : Signals on, NO,, exceeding are clamped by internal diodes. imit fward diode current to 3mA. aution: Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these any other conditions beyond those indicated in the operational sections of this specification is not implied. Electrical haracteristics-single. Supply ( = ±%, =, H = 2., =.) Parameter Analog Switch Symbo l T est ondition s T emp(º ) in. M ( 2) ( 2) T yp. M ax. ( 2) Unit 3) A nalog Signal Range -Resistance On-Resistance Match ) B etween hannels ( ANAO G R ( R N =., = -3mA NO = +2. O Ω ) O n-resistanceflatness ( R FAT( ) NO =, = -3mA =, 2., 3 NO Off eakageurrent (6) NO() () =., NO = =.. - Off eakage urrent ( 6) () + =., NO = +. = ± OM. - na On eakage urrent (6) () =., NO = = PS762D 7//9
3 PA3A Electrical haracteristics-single. Supply (continued) ( = ±%, =, H = 2., =.) Parameter Symbo l ondition s Temp(º ) M in ) ( ( 2) T yp M ax ( ) Unit ogic nput nput High oltage nput ow oltage H Guaranteed logic High evel Guaranteed logic ow evel. 2 nput urrent with nput oltage High nput urrent with nput oltage ow H = 2., all others =. -. =., all others = µα Dynamic Turn-On Time Turn-Off Time t t =, Figure ns ( 3) harge njection Q nf, Off solation = =, R GEN GEN = Ω Figure 2 ORR R = Ω, = pf, f= MHz, Figure 3 - ( ) rosstalk R () = Ω, = pf, f= MHz, Figure -92 NO apacitance ( ) f= khz, Figure Off apacitance OM() On apacitance OM() = f khz, Figure 6 7 p -3dB Bandwidth BW R = Ω, Figure 7 23 MHz ( 9) D isttion D R = kω.3 % Supply db pf Power-Supply Range Positive Supply urrent =., all channels on off =, 2 6 µa Notes:. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are f DESGN AD Y, not guaranteed subject to production testing. 3. Guaranteed by design.. R ΟΝ = R ΟΝ max - R ΟΝ min.. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured. 6. eakage parameters are % tested at maximum rated hot temperature and guaranteed by crelation at +º. 7. Off solation = 2log [ / ( NO )]. See figure 3.. Between any two switches. See figure. 9. D = R FAT() /R. 3 PS762D 7//9
4 PA3A Electrical Specifications - Single +3.3 Supply ( = +3.3 ±%, =, H = 2., =.) Parameter Symbo l ondition s Temp ( ) M in ) ( T yp ( 2) M ax ( ) Units Analog Switch A nalog Signal Range 3) On-Resistance On-Resistance Match B etween hannels ) On-Resistance F latness 3,) Dynamic ( ANAOG ull R ( R ( RFAT() NO NO = 3, = -3m A, =. = 3.3, = -3m A, =., 2. F Turn-On Time t = 3.3, NO o r =. Figure 2 Turn-Off Time t 2 harge njection 3) Supply Positive urrent Supply ( Q =n, FGEN =, RGEN =, Figure 2 c c = 3.6, all channels on off =, p µa Notes:. The algebraic convention, where the most negative value is a minimum and the most positive is a maximum, is used in this data sheet. 2. Typical values are f DESGN AD Y, not guaranteed subject to production testing. 3. Guaranteed by design. R ΟΝ = R ΟΝ max - R ΟΝ min. Flatness is defined as the difference between the maximum and minimum value of on-resistance measured. Ω ns 3 PS762D 7//9
5 PA3A Typical Operating haracteristics (T A =+º, unless otherwise noted) R vs. R vs. and Temperature 6 cc = +2 = A: T A = 9º B: T A = º : T A = -º R ( W Ω ) (Ω) R 2 A B () 2 3 ( ) 2 eakage urrents vs. Analog oltage na eakage urrent vs. Temperature = na = eakage (pa) 6 A( B() A() B() eakage pa pa pa () () -.pa N O, N, ().pa - Temperature ( ) º ( ) harge njection vs. Analog oltage - rosstalk and Off-solation vs. Frequency Q-harge njection (p) = = 3.3 (db) = Off solation rosstalk () Frequency (MHz) 36 PS762D 7//9
6 PA3A nsertion oss (db) nsertion oss vs. Frequency -3dB Point = R = WΩ Frequency (MHz), () nput Switching Threshold vs. Supply oltage () R vs. and Single Supply 2 Switching Times vs. Temperature 2 t, t (ns) t, t t t (ns) t t () - Temperature (º) (n A) cc.. Supply urrent vs. Temperature = (ma) Supply urrent vs. nput Switching Frequency 2.. = Temperature ( º ) Frequency (MHz) 37 PS762D 7//9
7 PA3A Test ircuits/timing Diagrams Switch nput ogic nput +3* NO cc R OUT pf ogic nput Switch Output +3 % OUT 9% t r <2ns t f<2ns t 9% UDES FXTURE AND STRAY APATAE R OUT = NO ( R R ) + t OG PUT WAEFORMS ERTED FOR SWTHES THAT HAE OPPOSTE OG *. FOR 3.3 SUPPY Figure. Switching Time GEN ogic nput R GEN + NO nf OUT OUT OUT Q = ( OUT )( ) Figure 2. harge njection 3 PS762D 7//9
8 PA3A Test ircuits/timing Diagrams (continued) nf nf + Signal Generat dbm + N Analyzer NO 2. NO N2 Figure 3. Off solation Figure. rosstalk nf nf apacitance Meter f = khz + NO 2. apacitance Meter f = khz + NO 2. Figure. hannel-off apacitance Figure 6. hannel-on apacitance nf Ordering nfmation Part Number Package PA3AP 6-Pin PDP NO cc R o PA3AW Narrow Body SO-6 PA3AQ P 6-Pin QSOP 6-Pin PDP W Narrow Body SO-6 Rg = Q P 6-Pin QSOP 6-Pin PDP W Narrow Body SO-6 Q 6-Pin QSOP Figure 7. Bandwidth 39 PS762D 7//9
PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More informationINPUTS V 1 V 2 OSC IN V 3 V 4
19-0391; Rev 2; 9/08 Low-Voltage, Quad, SPDT, General Description The is a precision, low-voltage, quad, singlepole/double-throw (SPDT) analog switch. The four independent switches operate with bipolar
More information*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1
9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With
More informationPrecision, Quad, SPDT, CMOS Analog Switch
19-0189; Rev 1; 6/99 Precision, Quad, SPDT, MOS Analog Switch General Description The is a precision, quad, single-pole doublethrow (SPDT) analog switch. The four independent switches operate with bipolar
More informationFunctional Diagrams, Pin Configurations, and Truth Table
Ω Ω µ With +12V power supply, the PS4066/PS4066A guarantee
More informationLow-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More information5Ω, Quad, SPST, CMOS Analog Switches
9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)
More informationFEATURES BENEFITS APPLICATIONS. QFN-16 (4 mm x 4 mm) Top View GND 3
1.6 On Resistance, ± 5 V, +12 V, and +3 V Quad SPST Switches DESRIPTION The are monolithic quad singlepolesinglethrow analog switches. The G9424E and DG9425E differ only in that they respond to opposite
More informationPI5A100 Precision, Wide Bandwidth 4PDT Analog Switch
Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with V supply) Minimizes Distortion and Error Voltages On-Resistance Matching Between Channels,.Ω
More informationMaxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
More informationLow-Power, High-Speed CMOS Analog Switches
G401, G403, G40 Low-Power, High-Speed MOS Analog Switches ESRIPTION The G401, G403, G40 monolithic analog switches were designed to provide precision, high performance switching of analog signals. ombining
More information10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad PT MO Analog es ERIPTION The G4 series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog signals. ombining low power
More informationPrecision Quad SPDT Analog Switch
Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a
More informationMAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF
9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal
More informationMAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF
9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat
More informationFEATURES APPLICATIONS
.7, Low On Resistance, + V, +5 V, +3 V, ± 5 V, SPST Switches DESCRIPTION The DG9E and DG9E are monolithic single-pole-single-throw (SPST) analog switches. The DG9E has a normally closed function. The DG9E
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG27 High-Speed Quad Monolithic SPST CMOS Analog Features Benefits Applications Fast ing : ns Low Charge Injection: pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Description Fast Settling Times
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More informationPI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features
2345678923456789234567892234567892345678923456789223456789234567892345678922345678923456789234567892234567892 Features Single-Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Range Low On-Resistance
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch. Features Benefits Applications. Fast Settling Times Reduced Switching Glitches High Precision
DG High-Speed Quad Monolithic SPST CMOS Analog Switch Features Benefits Applications Fast Switching t ON : ns Low Charge Injection: 9 pc Low r DS(on) : 3 TTL Compatible Low Leakage: pa Fast Settling Times
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More information2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 32 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing Glitches High Precision High-Speed
More informationMonolithic Dual SPST CMOS Analog Switch
Monolithic Dual SPST CMOS Analog Switch DG00B DESCRIPTION The DG00B is a dual, single-pole, single-throw analog switch designed to provide general purpose switching of analog signals. This device is ideally
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage
More informationHigh-Speed Quad Monolithic SPST CMOS Analog Switch
High-Speed Quad Monolithic SPST CMOS Analog FEATURES BENEFITS APPLICATIONS Fast ing : 55 ns Low Charge Injection: 5 pc Low r DS(on) : 3 TTL/CMOS Compatible Low Leakage: pa Fast Settling Times Reduced ing
More informationHigh-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches
9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More information50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationMAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More information1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636
pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More information0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information
.5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally
More information3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More information16-Channel CMOS Analog Multiplexer. Memory
306 16-Channel CMOS Analog Multiplexer FEATURES: RAD-PAK technology radiation-hardened against natural space radiation Total dose hardness: - > 50 Krad (Si), depending upon space mission Excellent Single
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More informationThe UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
More informationCMOS Analog Switches (Obsolete for non-hermetic. Use DG304B Series as pin-for-pin replacements.)
DGA_MIL/A_MIL/A_MIL/A_MIL CMOS Analog Switches (Obsolete for non-hermetic. Use DGB Series as pin-for-pin replacements.) -V Input Range Fast Switching t ON : ns Low r DS(on) : Single Supply Operation CMOS
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationDG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.
1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationImproved Quad CMOS Analog Switches
Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,
More informationPrecision Monolithic Quad SPST CMOS Analog Switches
Precision Monolithic Quad SPST CMOS Analog Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More informationPrecision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers
9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationDual SPDT Analog Switch
Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V
More informationPA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1
9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V
More informationDATASHEET ISL8393. Features. Applications. Ordering Information. Related Literature. Low-Voltage, Single and Dual Supply, Quad SPDT, Analog Switches
NOT REOMMENDED FOR NEW DESIGNS REOMMENDED REPLAEMENT PART ISL8393 Low-Voltage, Single and Dual Supply, Quad SPDT, Analog Switches DATASHEET FN638 Rev 3. The Intersil ISL8394 device is a precision, quad
More information8-Ch/Dual 4-Ch High-Performance CMOS Analog Multiplexers
8-Ch/ual 4-Ch High-Performance CMOS Analog Multiplexers ESCRIPTION The G48 is an 8-channel single-ended analog multiplexer designed to connect one of eight inputs to a common output as determined by a
More informationPART MAX4584EUB MAX4585EUB TOP VIEW
19-1521; Rev ; 8/99 General Description The serial-interface, programmable switches are ideal for multimedia applicatio. Each device contai one normally open (NO) single-pole/ single-throw (SPST) switch
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationDG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS
High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6
More informationDG3157. High-Speed, Low r ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) RoHS* COMPLIANT DESCRIPTION FEATURES
High-Speed, Low r ON, SPDT Analog Switch (2:1 Multiplexer/Demultiplexer Bus Switch) DG3157 DESCRIPTION The DG3157 is a high-speed single-pole double-throw, low power, TTL-Compatible bus switch. Using sub-micro
More informationLow-Power, High-Speed CMOS Analog Switches
G401B, G403B, G405B Low-Power, High-peed MO Analog witches ERIPTION The G401B, G403B, G405B monolithic analog switches are replacements for the popular G401/403/405 analog switches and provide improved
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationMAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1
9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from
More informationMAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationADG1411/ADG1412/ADG1413
.5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
More informationPrecision, 4-Channel/Dual 2-Channel, Low-Voltage, CMOS Analog Multiplexers
9-7; Rev. ; /98 Precision, 4-Channel/Dual 2-Channel, General Description The AX48/AX49 precision, monolithic, COS analog multiplexers (muxes) offer low on-resistance (less than ), which is matched to within
More informationFSUSB46 Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated Charger Port Detection
March 2013 FSUSB46 Hi-Speed USB2.0 (480Mbps) DPST Switch with Dedicated harger Port Detection Features Low On apacitance: 7.0pF Typical Low On Resistance: 3.9Ω Typical Low Power onsumption: 1μA Maximum
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability
19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationLow-Voltage, 1 Ω Dual SPST Analog Switch with Power-Off Isolation. Description
FS1259 Low-Voltage, 1 Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (V CC =0 V) 1 Ω On Resistance (R ON ) for 4.5V V CC 0.25 Ω Maximum R ON Flatness for 4.5 V V CC Space-Saving,
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationFSA1259 / FSA1259A Low-Voltage, 1Ω Dual SPST Analog Switch with Power-Off Isolation
FS1259 / FS1259 Low-Voltage, 1Ω Dual SPST nalog Switch with Power-Off Isolation Features Power-Off Isolation (=0V) 1Ω On Resistance (R ON) for 4.5V 0.25Ω Maximum R ON Flatness for 4.5V Space-Saving, US8
More informationLC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453
LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationCMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620
CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation
More information1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859
1.3 Ω CMOS, 1.8 V to 5.5 ingle SPT Switch/2:1 MUX in SOT-66 Package AG859 FEATURES 1.8 V to 5.5 V single supply Tiny 1.65 mm 1.65 mm package Low on resistance: 1.3 Ω at 5 V supply High current-carrying
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More informationPower-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationLow-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability
19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -
More informationLow Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223
Data Sheet Low Capacitance, Low Charge Injection, ±15 V/+12 V icmos Dual SPST Switches ADG1221/ADG1222/ADG1223 FEATURES
More information