SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
|
|
- Hector Hamilton
- 6 years ago
- Views:
Transcription
1 GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power supply. It features high-bandwidth (3MHz) and low on-resistance (4Ω TYP), targeted applications for audio switching. The SGM4461 is configured as a dual double-pole /double-throw (DPDT) device with two logic control inputs that control two multiplexer/demultiplexers each. The configuration can also be used as a dual differential 2-to-1 multiplexer/ demultiplexer. FEATURES Low Voltage Operation: 1.8V to 5.5V Low On-Resistance: 4Ω (TYP) Low On-Resistance Flatness -3dB Bandwidth: 3MHz Rail-to-Rail Input and Output Operation High Off-Isolation: -75dB at 1MHz Low Crosstalk: -1dB at 1MHz Typical Power Consumption (<.1µW) TTL/CMOS Compatible Lead (Pb) Free TQFN-16 (2.6mm 1.8mm) Package Extended Industrial Temperature Range: -4 to +85 SGM4461 is available in Pb-free TQFN-16 (2.6mm 1.8mm) package. BLOCK DIAGRAM APPLICATIONS Communication Systems Cell Phones Portable Instrumentation Audio Signal Routing Audio and Video Switching PCMCIA Cards Computer Peripherals Modems PDAs NC1 NO1 NC2 NO2 NC3 NO3 NC4 NO4 REV. A. 1
2 ORDERG FORMATION MODEL SGM4461 P- PACKAGE TQFN-16 (2.6mm 1.8mm) SPECIFIED TEMPERATURE RANGE ORDERG NUMBER PACKAGE MARKG PACKAGE OPTION -4 to +85 SGM4461YTQA16/TR 4461 Tape and Reel, 3 P CONFIGURATION (TOP VIEW) NC4 NO1 1 SGM4461YTQA16 4 NO4 3-4 NC NO NC NC1 1-2 NO2 2 TQFN-16 (2.6mm 1.8mm) FUNCTION TABLE 1-2 Function NC1 and NC2 NO1 and NO2 ON OFF 1 OFF ON 3-4 Function NC3 and NC4 NO3 and NO4 ON OFF 1 OFF ON ABSOLUTE MAXIMUM RATGS to...v to 6V Analog, Digital voltage range V to ( ) +.3V Continuous Current NO, NC, or...±1ma Operating Temperature Range...-4 to +85 Junction Temperature...15 Storage Temperature to +15 Lead Temperature (soldering, 1s)...26 Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. P DESCRIPTION NAME TQFN P FUNCTION 14 Power supply 6 Ground X 2,1 Digital control pin to connect the terminal to the NO or NC terminals X 16,4, 8, 12 Common terminal NO X 15,3, 7, 11 Normally-open terminal NC X 1, 5, 9, 13 Normally-closed terminal Note: NO X, NC X and X terminals may be an input or output. 2
3 ELECTRICAL CHARACTERISTICS ( = +4.5V to +5.5V, = V, V IH = +1.6V, V IL = +.5V, T A = -4 to +85. Typical values are at = +5.V, T A = +25, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP M TYP MAX UNITS ANALOG SWITCH Analog Signal Range V NO, V NC, V -4 to +85 V On-Resistance R ON = 4.5V, V, Ω I = -1mA, Test Circuit 1-4 to Ω On-Resistance Match Between Channels R ON = 4.5V, V, Ω I = -1mA, Test Circuit 1-4 to Ω On-Resistance Flatness Source OFF Leakage Current Channel ON Leakage Current DIGITAL PUTS R FLAT(ON) I NC(OFF), I NO(OFF) I NC(ON), I NO(ON), I (ON) = 4.5V, V, Ω I = -1mA, Test Circuit 1-4 to Ω =5.5V, = 3.3V/.3V, V =.3V/ 3.3V -4 to µa = 5.5V, V =.3V/ 3.3V, =.3V/ 3.3V, or floating -4 to µa Input High Voltage V H -4 to V Input Low Voltage V L -4 to V Input Leakage Current I = 5.5V, V = V or 5.5V -4 to µa DYNAMIC CHARACTERISTICS Turn-On Time t ON V NC or V NO = 3.V, = 3Ω, ns Turn-Off Time = 35pF, Test Circuit ns Break-Before-Make Time Delay Charge Injection Off Isolation Channel-to-Channel Crosstalk -3dB Bandwidth Channel ON Capacitance POWER REQUIREMENTS t OFF t D Q O ISO X TALK BW C NC(ON), C NO(ON), C (ON) V NC or V NO = 3.V, = 3Ω, = 35pF, Test Circuit4 V G =, R G = Ω, = 1.nF, Q = x, Test Circuit ns pc Signal = dbm, =, 1MHz Test Circuit5 1MHz Signal = dbm, =, 1MHz Test Circuit6 1MHz Signal = dbm, =, Test Circuit7 db db MHz pf Power Supply Range -4 to V Power Supply Current I + = 5.5V, V = V or -4 to µa Specifications subject to changes without notice. 3
4 ELECTRICAL CHARACTERISTICS ( = +2.7V to +3.6V, V IH = +1.6V, V IL = +.4V, T A = -4 to +85. Typical values are at = +3.V, T A = +25, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS TEMP M TYP MAX UNITS ANALOG SWITCH Analog Signal Range V NO, V NC, V -4 to +85 V On-Resistance R ON = 2.7V, V, Ω I = -1mA, Test Circuit 1-4 to Ω On-Resistance Match Between Channels R ON = 2.7V, V, Ω I = -1mA, Test Circuit 1-4 to Ω On-Resistance Flatness Source OFF Leakage Current Channel ON Leakage Current DIGITAL PUTS R FLAT(ON) I NC(OFF), I NO(OFF) I NC(ON), I NO(ON), I (ON) = 2.7V, V, Ω I = -1mA, Test Circuit 1-4 to Ω = 3.6V, = 3.3V /.3V, V =.3V/ 3.3V = 3.6V, V =.3V/ 3.3V, =.3V/ 3.3V, or floating -4 to µa -4 to µa Input High Voltage V H -4 to V Input Low Voltage V L -4 to V Input Leakage Current I = 2.7V, V = V or2.7v -4 to µa DYNAMIC CHARACTERISTICS Turn-On Time t ON V NC or V NO = 1.5V, = 3Ω, ns Turn-Off Time = 35pF, Test Circuit ns Break-Before-Make Time Delay Charge Injection Off Isolation t OFF t D Q O ISO V NC or V NO = 1.5V, = 3Ω, = 35pF, Test Circuit4 V G =, R G = Ω, = 1.nF, Q = x, Test Circuit ns pc Signal = dbm, =, 1MH db Test Circuit5 1MHz db Channel-to-Channel Crosstalk 3dB Bandwidth Channel ON Capacitance X TALK BW C NC(ON), C NO(ON), C (ON) Signal = dbm, =, 1MHz db Test Circuit6 1MHz db Signal = dbm, =, Test Circuit MHz pf Specifications subject to changes without notice. 4
5 SGM4461 TYPICAL PERFORMANCE CHARACTERISTICS On Response (db) On Response vs. Frequency V+ = +4.2V T A = +25 On Response (db) On Response vs. Frequency V+ = +3V T A = Frequency (MHz) Frequency (MHz) On Response (db) Response vs. Frequency OFF-ISOLATION CROSSTALK V+ = +4.2V T A = Frequency (MHz) On Response (db) Response vs. Frequency OFF-ISOLATION CROSSTALK V+ = +3V T A = Frequency (MHz) 5
6 TEST CIRCUITS 1mA V1 R ON = V1/1mA Test Circuit 1. On Resistance.1μF V 5% 5% RL 3Ω 35pF 9% 9% t ON t OFF Test Circuit 2. Switching Times (t ON, t OFF ).1μF R G Δ V G 1nF V ON OFF ON V Q = Δ V Test Circuit 3. Charge Injection 6
7 TEST CIRCUITS (Cont.).1μF NC NO V 5% 3Ω 35pF 9% t D Test Circuit 4. Break-Before-Make Time Delay (t D ).1µF NC NO Source Signal 5pF Test Circuit 5. Off Isolation.1μF Source Signal N.C. 5pF 1-2 5pF Channel To Channel Crosstalk = -2 log Test Circuit 6. Channel-to-Channel Crosstalk 7
8 TEST CIRCUITS (Cont.) 1nF Source Signal 5pF Test Circuit 7. -3dB Bandwidth 8
9 PACKAGE OUTLE DIMENSIONS TQFN-16 (2.6mm 1.8mm) 2.6±.5.4±.5 ( 15).4 TYP P #1 IDENTIFICATION CHAMFER ± Ref..5±.5 P #1 DOT BY MARKG TOP VIEW 2 1.2±.5 BOTTOM VIEW.75± Ref. SIDE VIEW Note: All linear dimensions are in millimeters. 12/28 REV. A. 1 SGMICRO is dedicated to provide high quality and high performance analog IC products to customers. All SGMICRO products meet the highest industry standards with strict and comprehensive test and quality control systems to achieve world-class consistency and reliability. For information regarding SGMICRO Corporation and its products, see 9
SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power
More informationSGM MHz, Low Voltage SPDT Analog Switch in 6-pin SC70
GENERAL DESCRIPTION The SGM3167 is a single, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switches designed to operate from a single 1.8V to 5.5V supply. It features high-bandwidth (600MHz)
More informationSGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered
More informationSGM Ω, Low Voltage Quad, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power
More informationSGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted
More informationSGM3717 4Ω, 400MHz Bandwidth, Dual, SPDT Negative Signal Handling Analog Switch
Preliminary datasheet SGM3717 GENERAL DESCRIPTION The SGM3717 is a dual, bidirectional, single-pole/ double-throw (SPDT) CMOS analog switch designed to operate from a single +2.5V to +5.0V supply. It features
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationSGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch
GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.
More information4Ω, High Speed, Low Voltage Dual, DPDT Analog Switch
GENERAL DESCRIPTION The is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power supply.
More informationSGM Ω, 300MHz, Low-Power Full-Speed USB (12Mbps) Switch
GENERAL ESCRIPTION The SGM2258 is a high-performance, dual, single-pole/ double-throw (SPT) CMOS analog switch designed for switching USB 1.1 signals. High bandwidth and low on-resistance make this switch
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DESCRIPTION The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. SGM7222 is designed for the switching of
More informationSGM7228 Low Cost, High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7228 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7228 is designed for the switching of high-speed
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QFN16 3.0 3.0 UMA QFN16 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single
More informationFEATURES GENERAL DESCRIPTION PIN CONFIGURATIONS(TOP VIEW) APPLICATIONS SGM4157YD6 FUNCTION TABLE PIN DESCRIPTION 6 IN GND 5 V+ COM DFN-6 REV.
SPDT 1Ω Analog Switch GENERAL DESCRIPTION The is a single Low ON-Resistance(1Ω), fast single-pole double-throw (SPDT) CMOS switch. It is designed for low operating voltage, high current switching of speaker
More informationSGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DECRIPTION The GM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply. GM7222 is designed for the switching of high-speed
More informationHigh Speed, Low Voltage, Dual, DPDT Analog Switch
High Speed, Low Voltage, Dual, DPDT Analog Switch General Description UM QF 3.0 3.0 UMA QF 2.6 1.8 The UM/A is a high speed, dual, dual-pole/double-throw (DPDT) analog switch operates from a single +1.8V
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/doublethrow (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationPI5A121/PI5A122/PI5A124
es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/DeMux) designed to operate at a single +5V supply. This 2-channel multiplexer/demultiplexer
More informationSub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection
New Product DG/DG1 Sub-Ω, Low Voltage, SPDT Analog Switches with Over Current Protection DESCRIPTION The DG/DG1 are low-voltage single single-pole/ double-throw monolithic CMOS analog switches. Designed
More informationMultiplexers/Switches
EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch
More information0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer
General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF
More informationPI5A4684. Chip Scale Packaging, Dual SPDT Analog Switch. Features. Description. Pin Configuration/ Block Diagram (top view) CSP.
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.5Ω. Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5V min. High Off Isolation:
More informationFEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )
DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power
More informationMP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches
The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance
More informationPin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1
9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance
More information0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch
.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs
More informationUM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications
0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from
More informationFSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation
December 2013 FSA4159 Low-Voltage, 1Ω SPDT Analog Switch with Power-Off Isolation Features Low I CC When the S Input is Lower Than V CC Power-Off Isolation (V CC=0 V) 1 Ω On Resistance (R ON) for 4.5 V
More information0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches
19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V
More informationPART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO
9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally
More informationAME. 1-Ohm Low Voltage SPDT Analog Switch AME4620. Functional Block Diagram. General Description. Features. Applications
4620 General Description The 4620 analog switches feature low ON resistance, single-pole, double-throw (SPDT) with wide operating single power supply voltage range, from 1.8V to 5.5V. Functional Block
More informationSGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode
Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when
More informationThe UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage
General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance
More informationTOP VIEW COUT1 COM2. Maxim Integrated Products 1
19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.
More information0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch
.6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.
More informationBCT4222B 350MHz DPDT Analog Switch
BCT4222B 350MHz DPDT Analog Switch Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.04 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off Isolation: 58dB at
More informationAutomotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth
Automotive 125 C Analog Switch Dual DPDT / Quad SPDT, 0.37, 338 MHz Bandwidth DESCRIPTION The, is a four-channel single-pole double-throw (SPDT) analog switch with two control inputs. It is also known
More informationDG2535/DG Ω Low-Voltage Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS APPLICATIONS
0.35-Ω Low-Voltage Dual SPDT Analog Switch DG2535/DG2536 DESCRIPTION The DG2535/DG2536 is a sub Ω (0.35 Ω at 2.7 V) dual SPDT analog switches designed for low voltage applications. The DG2535/DG2536 has
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG22 DESCRIPTION The DG22 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low power,
More information50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP
9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from
More informationSGM48754 Quad SPST CMOS Analog Switch
GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage
More informationPI5A23159 Low Voltage Dual SPDT 0.8Ω Analog Switch
Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8 at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Overvoltage Tolerance: 5.5V(Min) Fast Transition Speed:
More informationSGM330A Quad, Wide-Bandwidth SPDT Video Analog Switch
GENERAL DESCRIPTION The SGM330A is a quad, bidirectional, single-pole/ double-throw (SPDT) CMOS video analog switch (Mux/ DeMux) designed to operate from a single 2.7V to 5.5V power supply. This 2-channel
More information2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package
19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw
More informationLow-Voltage Single-Supply, SPDT Analog Switch in SC-70
Low-oltage Single-Supply, SPDT Analog Switch in SC-7 DESCRIPTION The DG499 is a cost effective upgrade to other types of 499 low-voltage, single-pole/double-throw analog switches available in the industry
More information0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854
.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:
More informationFSA Ω Low-Voltage Dual DPDT Analog Switch
March 2013 FSA2467 0.4Ω Low-Voltage Dual DPDT Analog Switch Features Typical 0.4 On Resistance (R ON ) for +2.7V Supply Features Less then12µa ICCT Current when Sn Input is Lower than V CC 0.25 Maximum
More informationLR1551. Leshan Radio Co., Ltd. 2.7Ω Low Voltage SPDT Analog Switch in 6-pin SOT363 ENB VCC B ASSS A1 GND A2 LR1551 ENB GND VCC. SSS: production id
2.7Ω Low Voltage SPDT Analog Switch in 6-pin SOT363 Features Wide Power Supply Range: 1.8V to 5.5V High andwidth: 300MHz High Off-Isolation: 84d at 1MHz 51d at 10MHz On-Resistance: 2.7Ω(typ) at 5.0V Fast
More informationBCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1
BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,
More informationCMOS, ±5 V/+5 V, 4 Ω, Single SPDT Switches ADG619/ADG620
CMOS, ± V/+ V, 4 Ω, Single SPDT Switches ADG619/ADG62 FEATURES 6. Ω (maximum) on resistance.8 Ω (maximum) on-resistance flatness 2.7 V to. V single supply ±2.7 V to ±. V dual supply Rail-to-rail operation
More informationPI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
More informationMAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT
19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V
More information1.3 Ω CMOS, 1.8 V to 5.5 V Single SPDT Switch/2:1 MUX in SOT-66 Package ADG859
1.3 Ω CMOS, 1.8 V to 5.5 ingle SPT Switch/2:1 MUX in SOT-66 Package AG859 FEATURES 1.8 V to 5.5 V single supply Tiny 1.65 mm 1.65 mm package Low on resistance: 1.3 Ω at 5 V supply High current-carrying
More informationBCT MHz DPDT Analog Switch for USB2.0 Hi-Speed
BCT4227 700MHz DPDT Analog Switch for USB2.0 Hi-Speed Features VCC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 Ω (TYP) ON-Resistance Flatness: 0.08Ω (TYP) High Off
More informationBCT4222B BCT4222B. High-Speed DPDT Analog Switch. General Description. Features. Connection Diagram. Applications
BCT4222B Features V CC Operating Range: 1.65V to V Rail-to-Rail Signal Range ON-Resistance Matching: 0.05 (TYP) ON-Resistance Flatness: 0.08 (TYP) High Off Isolation: 57dB at 10MHz 54dB (10MHz) Crosstalk
More informationLow-Voltage, High-Speed, Quad, SPST CMOS Analog Switches
9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard
More informationLow Voltage, Dual SPDT Analog Switch with Charge Pump
Low Voltage, Dual SPDT Analog Switch with Charge Pump DG, DG, DG DESCRIPTION The DG, DG, DG are monolithic CMOS analog switching products designed for high performance switching of analog signals. Combining
More informationCMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774
a FEATURES Low Insertion Loss and On Resistance: 2.2 Typical On Resistance Flatness.5 Typical Automotive Temperature Range 4 C to +125 C 3 db Bandwidth = 24 MHz Single 3 V/5 upply Operation Rail-to-Rail
More information20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP
9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V
More informationDual DPDT Ultra-Low R ON
General Description Dual DPDT Ultra-Low R ON Analog Switch UM3699A UM3699A QFN16 3.0 3.0 The UM3699A are dual independent ultra low R ON DPDT analog switches. These devices are designed for low operating
More informationDescription. Features. Application. Pin Assignment. Pin Description. Logic Function Table PI5A3158B
Low oltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control
More information0.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch
.39, Low-R ON, Ultra-Low Distortion, Compact DPDT Analog Switch DESCRIPTION The is a compact, low resistance, ultra-low distortion double pole double throw (DPST) analog switch. The features a flat.39
More informationPI5A3158B Low Voltage Dual SPDT Analog Switch 2:1 Mux/Demux Bus Switch
2:1 Mux/Demux Bus Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 8Ω at 3.0 Wide Range: 1.65 to 5.5 Rail-to-Rail Signal Range Control Input Overvoltage Tolerance: 5.5(Min)
More informationWAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:
WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low
More information3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849
3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High
More informationSGM Ω, 300MHz Bandwidth, Dual, SPDT Analog Switch
GENERAL DESCRIPTION Th SGM4717 is a dual, bidirctional, singl-pol/ doubl-throw (SPDT) CMOS analog switch dsignd to oprat from a singl 1.8V to 5.5V supply. It faturs high-bandwidth (300MHz) and low on-rsistanc
More informationPA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1
9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V
More informationFeatures. Applications
PRELIMINARY DATASHEET IDTHS421V16 Description The IDTHS421V16 is a bi-directional, low power, Quad single-pole, double-throw (SPDT) hybrid switch targeted at dual SIM card multiplexing. It is optimized
More informationPower-off Isolation, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Isolation,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationFEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number
Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with
More informationWAS4729QB QB* WAS4729QB. Descriptions. Features. Applications. Order information
WAS4729QB Low On Resistance (0.75Ω) Dual SPDT Analog Switch with Negative Swing Audio Capability Http//:www.sh-willsemi.com Descriptions The WAS4729QB is a high performance, dual Single Pole Double Throw
More informationSGM2025 Quad, Low Power, Low Dropout, 200mA, RF-Linear Regulators
GENERAL DESCRIPTION The SGM2025 is a quad, low-power, low-dropout, CMOS linear voltage regulator that operates from 3.3V to 5.5V input and delivers up to 200mA continuous current at each channel. An ultra
More informationPower-off Protection, 6, 1.8 V to 5.5 V, SPDT Analog Switch (2:1 Multiplexer)
Power-off Protection,,. V to 5.5 V, SPDT Analog Switch (: Multiplexer) DESCRIPTION The is a high performance single-pole, double-throw (SPDT) analog switch designed for. V to 5.5 V operation with a single
More informationDG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS
DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,
More informationADG1411/ADG1412/ADG1413
.5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel
More informationMAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES
19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)
More informationTOP VIEW COM2. Maxim Integrated Products 1
19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.
More informationWAS4723Q WAS4723Q. Order information 1 2 VCC NO1. Low On Resistance, Dual SPDT Analog Switch. Http//: QFN L
WAS4723Q Low On Resistance, Dual SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4723Q is a high performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low Ron
More informationMAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches
// General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching
More information10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches
19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are
More informationPI5A391 PI5A393A. Precision Wide Bandwidth Quad Analog Switches. Description. Features
2345678923456789234567892234567892345678923456789223456789234567892345678922345678923456789234567892234567892 Features Single-Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Range Low On-Resistance
More informationLow-Voltage Single SPDT Analog Switch
Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low
More information0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888
FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying
More informationMAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF
19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal
More information0.5 Ω CMOS 1.65 V to 3.6 V Dual SPDT/2:1 Mux in Mini LFCSP Package ADG824
ata Sheet.5 Ω CMOS.65 V to 3.6 V ual SPT/2: Mux in Mini LFCSP Package FEATURES.5 Ω typical on resistance.85 Ω maximum on resistance at 85 C.65 V to 3.6 V operation High current carrying capability: 3 ma
More informationMAX4734 LOGIC NO1 GND. Maxim Integrated Products 1
9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has
More informationDescription. Features. Applications. Pin Assignment. Pin Description Pin No Pin Name. Logic Function Table Logic Inputs(S) PI5A4157
Low Voltage SPDT 0.8Ω Analog Switch Features CMOS Technology for Bus and Analog Applications Low On-Resistance: 0.8Ω at 3.0V Wide Range: 1.65V to 5.5V Rail-to-Rail Signal Range Control Input Overvoltage
More informationON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT
9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make
More informationLow-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability
Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative
More informationHigh-Bandwidth, Low Voltage, Dual SPDT Analog Switches
DG9E High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG9E is monolithic CMOS dual single-pole / double-throw (SPDT) analog switches. It is specifically designed for low-voltage,
More informationQuad, Rail-to-Rail, Fault-Protected, SPST Analog Switches
19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard
More informationSGM mW Differential Input, Stereo Audio Power Amplifier
SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power
More informationSGM3798 Audio Headset Analog Switch with Reduced GND Switch R ON and FM Capability
GENERAL DESCRIPTION The is an audio headset analog switch that is used to detect 3.5mm accessories and switch SLEEVE and RING2 by external controller. The ground signal is routed through a pair of low-impedance
More informationMAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications
General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for
More information1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636
pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C
More informationMaxim Integrated Products 1
9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range
More information