DG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS

Transcription

1 DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals, the DG275/276 provide low on-resistance (0.4 at V), fast speed (t ON, t OFF at 7 ns and 4 ns) and the ability to handle signals over the entire analog voltage range. When operated on a + 3 V supply, control pins are compatible with.8 V digital logic. Additionally, on-resistance flatness and matching (0.05 and 0. ) offer high accuracy between channels. Built on s low voltage submicron CMOS process, the DG275, DG276 were designed to offer solutions that extend beyond audio/video functions, to providing the performance required for today s demanding mixed-signal switching in portable applications. The DG275 contains a normally open (NO) switch, and the DG276 contains a normally closed switch. An epitaxial layer prevents latch-up. All switches conduct equally well in both directions when on, and block up to the power supply level when off. As a committed partner to the community and the environment, manufactures this product with the lead (Pb)-free device terminations. For analog switching products manufactured with 0 % matte tin device terminations, the lead (Pb)-free -E3 suffix is being used as a designator. FEATURES Low voltage operation (.6 V to 3.6 V) Low on-resistance - R DS(on) : 0.4 at 2.7 V Off-isolation: - 57 db at MHz Fast switching: 25 ns t ON Low charge injection - Q J : 9 pc Low power consumption: < µw SC-70 5-lead package BENEFITS High accuracy High bandwidth TTL and low voltage logic compatibility Low power consumption Reduced PCB space APPLICATIONS Mixed signal routing Portable and battery operated systems Low voltage data acquisition Modems PCMCIA cards FUNCTIONAL BLOCK DIAGRAM AND P CONFIGURATION SC-70-5L COM 5 NO 2 3 DG275 4 Top View Device Marking: F7 TRUTH TABLE (DG275) Logic Switch 0 OFF ON SC-70-5L COM 5 NC 2 3 DG276 4 Top View Device Marking: F6 TRUTH TABLE (DG276) Logic Switch 0 ON OFF ORDERG FORMATION Temp. Range Package Part Number DG275DL-T-E3-40 C to 85 C SC70-5 DG276DL-T-E3 S-0303-Rev. C, 28-Feb-

2 DG275, DG276 ABSOLUTE MAXIMUM RATGS Parameter Limit Unit Reference to to + 4, COM, NC, NO a to ( V) V Continuous Current (NO, NC and COM Pins) ± 200 Peak Current (Pulsed at ms, % duty cycle) ± 300 ma Storage Temperature (D Suffix) - 65 to 50 C Power Dissipation (Packages) b 5-Pin SC-70 c 250 mw Notes: a. Signals on NC, NO, or COM or exceeding will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 3. mw/ C above 70 C. SPECIFICATIONS ( =.8 V) Parameter Analog Switch Symbol Test Conditions Otherwise Unless Specified =.8 V, ± %, V = 0.4 V or.0 V e Temp. a Limits - 40 C to 85 C Min. b Typ. c Max. b Analog Signal Range d V NO, V NC, V COM 0 V On-Resistance R ON =.8 V, V COM = 0.9 V I NO, I NC = ma Switch Off Leakage Current f I NO(off) I NC(off) = 2.0 V, V NO, V NC = 0.2 V/.8 V, V COM =.8 V/0.2 V I COM(off) Channel-On Leakage Current f I COM(on) = 2.0 V, V NO, V NC = V COM = 0.2 V/.8 V d d - - d - - d - Digital Control Input High Voltage V H.0 Input Low Voltage V L 0.4 V Input Capacitance d C in 4 pf Input Current f I L or I H V = 0 or - µa Dynamic Characteristics Turn-On Time d t ON V NO or V NC =.5 V, R L = 50, C L = 35 pf d Turn-Off Time d t OFF figures and 2 d 2 33 ns Charge Injection d Q J C L = nf, V GEN = 0 V, R GEN = 0 figure 3 3 pc Off-Isolation d OIRR R L = 50, C L = 5 pf, f = MHz - 57 db N O, N C Off Capacitance d C NO(off) 78 C NC(off) V = 0 or, f = MHz pf Channel-On Capacitance d C ON 93 Unit na 2 S-0303-Rev. C, 28-Feb-

3 DG275, DG276 SPECIFICATIONS ( = 3.0 V) Parameter Analog Switch Symbol Test Conditions Otherwise Unless Specified = 3 V, ± %,V = 0.5 V or.4 V e Temp. a Limits - 40 C to 85 C Min. b Typ. c Max. b Analog Signal Range d V NO, V NC, V COM 0 V On-Resistance R ON = 2.7 V, V COM =.5 V I NO, I NC = 0 ma R ON Flatness Switch Off Leakage Current R ON Flatness = 2.7 V, V COM = 0.6 V,.5 V, 2. V I NO, I NC = 0 ma I NO(off) I NC(off) = 3.3 V, V NO, V NC = 0.3 V/3 V, V COM = 3 V/0.3 V I COM(off) Channel-On Leakage Current I COM(on) = 3.3 V, V NO, V NC = V COM = 0.3 V/3 V Digital Control Input High Voltage V H.4 Input Low Voltage V L 0.5 V Input Capacitance d C in 5 pf Input Current I L or I H V = 0 or - µa Dynamic Characteristics Turn-On Time t ON 7 29 V NO or V NC =.5 V, R L = 50, C L = 35 pf Figure Turn-Off Time t OFF 4 26 ns Charge Injection d Q J C L = nf, V GEN = 0 V, R GEN = 0, figure 3 9 pc Off-Isolation d OIRR R L = 50, C L = 5 pf, f = MHz - 57 db NO, NC Off Capacitance d C NO(off) 72 C NC(off) V = 0 or, f = MHz pf Channel-On Capacitance d C ON 92 Power Supply Power Supply Range V Power Supply Current I+ = 3.6 V, V = 0 or µa Notes: a. = 25 C, = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, nor subjected to production test. e. V = input voltage to perform proper function. f. Guaranteed by 3 V leakage testing, not production tested Unit na Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S-0303-Rev. C, 28-Feb- 3

4 DG275, DG276 TYPICAL CHARACTERISTICS (T A = 25 C, unless otherwise noted) R DS(on) ( ) =.8 V, I NO/NC = ma = 2.7 V, I NO/NC = 0 ma R DS(on) ( ) V CC =.8 V 85 C, 25 C and - 40 C V CC = 2.7 V 85 C, 25 C and - 40 C V D (V) R DS(on) vs. V COM vs. V CC V D (V) R DS(on) vs. V D, V CC and Temperature I CC Supply Current (pa) 00 0 V SUP = 3.6 V, V = 0 V Power Supply Current (µa) = 3.6 V V = 3.6 V V SUP = 3.6 V, V = 3.6 V Temperature ( C) Supply Current vs. Temperature Inout Switching Frequency (khz) Switching Frequency vs. Supply Current 000 = 3.3 V = 3.3 V Leakage Current (pa) 00 0 I NO/NC(of f) I CO M(on) I COM(of f) Leakage Current (pa) I CO M(on) I COM(of f) I NO/NC(of Temperature ( C) Leakage Current vs. Temperature V COM, V NO, V NC - Analog Voltage (V) Leakage Current vs. Analog Voltage 4 S-0303-Rev. C, 28-Feb-

5 DG275, DG276 TYPICAL CHARACTERISTICS (T A = 25 C, unless otherwise noted) 40 t ON, t OFF - Switching Time (ns) R L = 50, C L = 35 pf V CC =.8 V V CC = 3.0 V LOSS, OIRR (db) LOSS OIRR, =.8 V OIRR, = 3.6 V Temperature ( C) Switching Time vs. V CC and Temperature K K 0 K M Frequency (khz) Insertion Loss, Off-Isolation vs. Frequency.4 40 Input Voltage (V) Q - Charge Injection (pc) =.8 V = 3.6 V V SUPPLY (V) Threshold vs. Supply Voltage V COM - Analog V oltage (v) Charge Injection vs. Analog Voltage S-0303-Rev. C, 28-Feb- 5

6 DG275, DG276 TEST CIRCUITS Switch Input Logic Input NO or NC COM Switch Output R L 300 V OUT C L 35 pf Logic Input Switch Output V H V L 0 V t ON 50 % t r < 5 ns t f < 5 ns 0.9 x V OUT t OFF C L (includes fixture and stray capacitance) R V = OU T V L CO M R L + R ON Logic = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. Figure. Switching Time V gen + R gen COM NC or NO V OUT C L = nf V OUT On V OUT Off On V = 0 - Q = V OUT x C L depends on switch configuration: input polarity determined by sense of switch. Figure 2. Charge Injection 6 S-0303-Rev. C, 28-Feb-

7 DG275, DG276 TEST CIRCUITS nf NC or NO 0 V, 2.4 V COM R L V CO M Off I so la tio n = 20 log V NO/ NC Analyzer Figure 3. Off-Isolation nf COM Meter 0 V, 2.4 V NC or NO HP492A Impedance Analyzer or Equivalent f = MHz Figure 4. Channel Off/On Capacitance maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see /ppg? S-0303-Rev. C, 28-Feb- 7

8 Package Information F e b e D -B- E -A- A 2 A E c 0.25 Gauge Plane Dim Min Nom Max Min Nom Max A A A b c D E E e 0.65BSC 0.026BSC e F L Nom 7 Nom L ECN: S Rev. C, 6-Jan-06 DWG: 586 A Document Number: Jan-06

9 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY TERTECHNOLOGY, C. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 900