PA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1

Size: px
Start display at page:

Download "PA R T NC1 A0 V+ EN CONTROL LOGIC A0 NC1 EN 1 MAX4674 COM2 QFN. Maxim Integrated Products 1"

Transcription

1 9-78; Rev 3; 2/6 3V/5V, 4Ω, Wideband Quad 2: Analog Multiplexer General Description The is a low-voltage CMOS analog switch containing four 2: multiplexers/demultiplexer. When powered from a single +5V supply, it features a low 4Ω max on-resistance (R ON ),.4Ω max R ON matching between channels, and.8ω RON flatness over the entire signal range. Off-leakage current is only.5na max at +25 C. The features fast turn-on (t ON ) and turn-off (t OFF ) times of 8ns and 6ns, respectively, and is available in QFN, QSOP, TSSOP, and SO packages. This low-voltage multiplexer operates with a +.8V to +5.5V single supply. All digital inputs have +.8V and +2.4V logic thresholds, ensuring TTL/CMOS-logic compatibility with +5V operation. Applications / Base-T ATM Switching Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Communications Circuits Relay Replacement Features Guaranteed On-Resistance 4Ω max (+5V Supply) 6Ω max (+3V Supply) Guaranteed Match Between Channels.4Ω max Guaranteed Flatness Over Signal Range.8Ω max.8v Operation R ON = Ω typ Over Temperature t ON = 5ns typ t OFF = 3ns typ Guaranteed Low Leakage Currents.5nA max at +25 C Single-Supply Operation from +.8V to +5.5V Rail-to-Rail Signal Handling TTL/CMOS-Logic Compatible Crosstalk: -4dB (MHz) Off-Isolation: -67dB (MHz) 4mm 4mm QFN Package PA R T Ordering Information T EM P R A N G E PIN - PA C K A G E PK G C O D E M AX 4674E E E - 4 C to + 85 C 6 QS OP E 6-4 M AX 4674E U E - 4 C to + 85 C 6 TS S O P U 6-2 M AX 4674E S E - 4 C to + 85 C 6 N ar r ow S O S 6-2 M AX 4674E GE - 4 C to + 85 C 6 QFN - E P * G 644- M AX 4674E GP - 4 C to + 85 C 2 QFN - E P * G *EP = Exposed pad. Pin Configuration/Functional Diagram/Truth Table TOP VIEW NC A AO N.C. N.C. A NC NO COM NC2 NO2 COM CONTROL LOGIC NC4 NO4 COM4 NC3 NO3 COM3 A X ON SWITCH NONE COM-NC COM2-NC2 COM3-NC3 COM4-NC4 COM-NO COM2-NO2 COM3-NO3 COM4-NO CONTROL LOGIC NO COM 2 2 NC4 NO4 NC NO 2 NC2 NO COM4 NC3 COM NC CONTROL LOGIC 6 5 NC4 4 NO4 3 COM4 2 NC3 QSOP/TSSOP/SO COM2 COM3 NO3 NO2 5 NO3 QFN COM2 N.C. N.C. COM3 QFN Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at , or visit Maxim s website at

2 2: Analog Multiplexer ABSOLUTE MAXIMUM RATINGS, A,...-.3V to +6V COM_, NO_, NC_ (Note)...-.3V to (V +.3V) Continuous Current COM_, NO_, NC_...±mA Peak Current (COM_, NO_, NC_) (pulsed at ms, % duty cycle)...±3ma Continuous Power Dissipation (T A = +7 C) 6-Pin QSOP (derate 8.3mW/ C above +7 C) mW 6-Pin TSSOP (derate 6.7mW/ C above +7 C)...533mW 6-Pin Narrow SO (derate 8mW/ C above +7 C)...64mW 6-Pin QFN (derate 8.5mW/ C above +7 C)...48mW 2-Pin QFN (derate 2mW/ C above +7 C)...6mW Operating Temperature Range E_E...-4 C to +85 C Die Temperature...+5 C Storage Temperature Range C to +5 C Lead Temperature (soldering, s)...+3 C Note : Signals on NO_, NC_, and COM_ exceeding or are clamped by internal diodes. Limit forward-diode current to maximum current rating. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Single +5V Supply ( = +4.5V to +5.5V, V IH = 2.4V, V IL =.8V,, unless otherwise noted. Typical values at TA = +25 C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Range V COM_,V NO_, V NC_ V On-Resistance R ON = 4.5V, I COM_ = ma, V NO_ or V NC_ = to On-Resistance Match Between Channels (Notes 4, 5) On-Resistance Flatness (Note 6) NO_, NC_ Off-Leakage Current (Note 7) COM_ Off-Leakage Current (Note 7) COM_ On-Leakage Current (Note 7) DIGITAL I/O (A, ) R ON R FLAT (ON) = 4.5V, I COM_ = ma, V NO_ or V NC_ = to = 4.5V, I COM_ = ma, V NO_ or V NC_ = to = 5.5V; V COM_ = V, I NO_(OFF), 4.5V; V NO_ or V NC_ = 4.5V, I NC_(OFF) V I COM_(OFF) = 5.5V; V COM_ = V, 4.5V; V NO_ or V NC_ = 4.5V, V I COM_(ON) = 5.5V; V COM_ = V, 4.5V; V NO_ or V NC_ =, 4.5V, or floating T A = +25 C T A = +25 C T A = +25 C.5.8 T A = +25 C -.5 ± T A = +25 C -.5 ± T A = +25 C -.5 ± Input Logic High V IH 2.4 V Input Logic Low V IL.8 V Input Leakage Current I IN V IN = or +5.5V -.5 ± +.5 µa DYNAMIC Turn-On Time (Note 7) t ON R L = Ω, C L = 35pF, V NO_ or V NC_ = 3V, Figure 2 T A = +25 C 8 2 Ω Ω Ω na na na ns 2

3 2: Analog Multiplexer ELECTRICAL CHARACTERISTICS Single +5V Supply (continued) ( = +4.5V to +5.5V, V IH = 2.4V, V IL =.8V,, unless otherwise noted. Typical values at TA = +25 C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Turn-Off Time (Note 7) t OFF R L = Ω, C L = 35pF, V NO_ or V NC_ = 3V, Figure 2 Break-Before-Make (Note 7) t BBM R L = Ω, C L = 35pF, V NO_ or V NC_ = 3V, Figure 3 T A = +25 C T A = +25 C 5 ns ns Charge Injection Q V G = 4V, R G =, C L =.nf, Figure 4 pc C L = 5pF, R L = Ω, f = MHz -47 Off-Isolation (Note 8) V ISO f = MHz, Figure 5 f = MHz -67 C L = 5pF, R L = Ω, f = MHz -68 Crosstalk (Note 9) V CT f = MHz, Figure 5 f = MHz -4 db db Total Harmonic Distortion THD R L = 6Ω, f = 2Hz to 2kHz.5 % NO_, NC_ Off-Capacitance C NO_(OFF), C NC_(OFF) V NO_, V NC_ =, f = MHz, Figure 6 pf COM_ Off-Capacitance C COM_(OFF) V COM_ =, f = MHz, Figure 6 2 pf COM_ On-Capacitance C (ON) V C OM_ = V N O_, V N C _ = GN D, f = M Hz, Fi g ure 6 3 pf SUPPLY Supply Range V Positive Supply Current I+ = +5.5V, V IN = or.. µa ELECTRICAL CHARACTERISTICS Single +3V Supply ( = +2.7V to +3.3V, V IH = 2.V, V IL =.4V, T A =T MIN to, unless otherwise noted. Typical values at T A = +25 C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS ANALOG SWITCH Analog Signal Range V COM, V NO, V NC_ V On-Resistance R ON = 2.7V, I COM_ = ma, V NO_ or V NC_ = to On-Resistance Match Between Channels (Notes 4, 5) On-Resistance Flatness (Note 6) NO_, NC_ Off-Leakage Current (Note 7) R ON R FLAT(ON) = 2.7V, I COM_ = ma, V NO_ or V NC_ = to = 2.7V, I COM_ = ma, V NO_ or V NC_ = to I NO_(OFF), V + = 3.3V ; V C OM _ = V, 3V ; I NC_(OFF) V N O_ or V N C _ = 3V, V T A = +25 C T A = +25 C T A = +25 C T A = +25 C -.5 ± Ω Ω Ω na 3

4 2: Analog Multiplexer ELECTRICAL CHARACTERISTICS Single +3V Supply (continued) ( = +2.7V to +3.3V, V IH = 2.V, V IL =.4V, T A =T MIN to, unless otherwise noted. Typical values at T A = +25 C.) (Notes 2, 3) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS COM_ Off-Leakage Current (Note 7) COM_ On-Leakage Current (Note 7) DIGITAL I/O (A, ) I COM_(OFF) V + = 3.3V ; V C OM _ = V, 3V ; V N O_ or V N C _ = 3V, V V + = 3.3V ; V C OM _ = V, 3V ; I COM_(ON) V NO_ or V NC_ = V, 3V, or floating T A = +25 C -.5 ± T A = +25 C -.5 ± Input Logic High V IH 2. V Input Logic Low V IL.4 V Input Leakage Current I IN V IN = or +5.5V -.5 ± +.5 µa DYNAMIC Turn-On Time (Note 7) t ON R L = Ω, C L = 35pF, V NO_ or V NC_ =.5V, Figure 2 Turn-Off Time (Note 7) t OFF R L = Ω, C L = 35pF, V NO_ or V NC_ =.5V, Figure 2 Break-Before-Make (Note 7) t BBM R L = Ω, C L = 35pF, V NO_ or V NC =.5V, Figure 3 T A = +25 C T A = +25 C 5 8 T A = +25 C 5 na na ns ns ns Charge Injection Q V G = 2V, R G =, C L =.nf, Figure 4 C f = MHz -47 Off-Isolation (Note 8) V L = 5pF, R L = Ω, ISO f = MHz, Figure 5 f = MHz -67 C f = MHz -68 Crosstalk (Note 9) V L = 5pF, R L = Ω, CT f = MHz, Figure 5 f = MHz -4 Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in this data sheet. Note 3: Parts are tested at the maximum hot-rated temperature. Limits across the entire temperature range are guaranteed by design and correlation. Note 4: R ON = R ON(MAX) - R ON(MIN). Note 5: R ON matching specifications for QFN packaged parts are guaranteed by design. Note 6: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the specified analog signal range. Note 7: Guaranteed by design. Note 8: Off-Isolation = 2log (V COM /V NO ), V COM = output, V NO = input to off switch. Note 9: Between any two switches. 4 8 pc NO_, NC_ Off-Capacitance C NO_(OFF), C NC_(OFF) V NO_ or V NC_ =, f = MHz, Figure 6 pf COM_ Off-Capacitance C COM_(OFF) V COM_ =, f = MHz, Figure 6 2 pf V COM_ = V NO_, V NC_ =, f = MHz, COM_ On-Capacitance C (ON) Figure 6 3 pf SUPPLY Positive Supply Current I+ = 3.3V, V IN = or.. µa db db

5 2: Analog Multiplexer ( = +5V, T A = +25 C, unless otherwise noted.) RON (Ω) ON-RESISTANCE vs. V COM =.8V = 2.5V = 3.V V COM (V) = 5.V - RON (Ω) = 5V ON-RESISTANCE vs. V COM T A = +85 C T A = -4 C V COM (V) Typical Operating Characteristics T A = +25 C -2 ICOM (pa) ON/OFF-LEAKAGE CURRT vs. TEMPERATURE I ON_LEAK TEMPERATURE ( C) I OFF_LEAK CHARGE INJECTION vs. V COM SUPPLY CURRT vs. SUPPLY VOLTAGE TURN-ON/-OFF TIME vs. SUPPLY VOLTAGE -6 Q (pc) 5 I+ (pa) ton/toff (ns) 2 5 t ON 5 5 t OFF V COM (V) (V) (V) ton/toff (ns) TURN-ON/-OFF TIME vs. TEMPERATURE t ON t OFF -7 AMPLITUDE (db) OFF-ISOLATION, ON-RESPONSE, AND CROSSTALK vs. FREQUCY ON-RESPONSE OFF-ISOLATION CROSSTALK -8 THD (%) TOTAL HARMONIC DISTORTION vs. FREQUCY TEMPERATURE ( C) -2.. FREQUCY (MHz).2 k k k FREQUCY (Hz) 5

6 2: Analog Multiplexer PIN QSOP/TSSOP/SO 2 QFN 6 QFN NAME FUNCTION 2 5 A Address Input 2 6 NC Normally Closed Terminal 3 2 NO Normally Open Terminal COM Analog Switch Common Terminal NC2 Normally Closed Terminal NO2 Normally Open Terminal COM2 Analog Switch Common Terminal 7, 9, 7, 9 N.C. No Connection Ground 9 7 COM3 Analog Switch Common Terminal 8 NO3 Normally Open Terminal 2 9 NC3 Normally Closed Terminal 2 3 COM4 Analog Switch Common Terminal 3 4 NO4 Normally Open Terminal NC4 Normally Closed Terminal Output Enable, Active Low Positive Supply Voltage EP EP EP Exposed Pad. Connect to. Pin Description Detailed Description The is a low on-resistance (R ON ), low-voltage, quad 2: analog multiplexer/demultiplexer that operates from a +.8V to +5.5V single supply. The features very fast switching speed (t ON = 8ns max, t OFF = 6ns max) and guaranteed breakbefore-make switching. Its low R ON allows high continuous currents to be switched in a variety of applications. Digital Interface A and are CMOS digital inputs that meet TTL logic levels when = 5V. Note that A and can exceed the voltage at to a maximum of +5.5V. This feature allows operation of the from a +3.3V supply while controlling it with 5V CMOS logic signals. The Pin Configuration/Functional Diagram/Truth Table located on the first page of this data sheet details the operation of the. Applications Information Power-Supply Considerations Overview The construction is typical of most CMOS analog switches. It has two supply pins, and, used to drive the internal CMOS switches and set the limits of the analog voltage on any switches. Reverse ESD-protection diodes are internally connected between each analog-signal pin and both and. If any analog signal exceeds and, one of these diodes conducts. During normal operation, these and other reverse-biased ESD diodes leak, forming the only current drawn from V CC or. Virtually all the analog leakage current comes from the ESD diodes. Although the ESD diodes on a given signal pin are identical and therefore fairly well balanced, they are reverse biased differently. Each is biased by either or and the analog signal. This means 6

7 2: Analog Multiplexer their leakages will vary as the signal varies. The difference in the two-diode leakages to the and pins constitutes the analog-signal-path leakage current. All analog leakage current flows between each pin and one of the supply terminals, not to the other switch terminal, which is why both sides of a given switch can show leakage currents of either the same or opposite polarity. and power the internal logic and set the input logic limits. Logic inputs have ESD-protection diodes to ground. The logic-level thresholds are TTL/CMOS compatible when is +5V. As rises, the threshold increases; as falls, the threshold decreases. For example, when = +3V, the guaranteed minimum logic-high threshold decreases to 2.V. Low-Voltage Operation The operates from a single supply between +.8V and +5.5V. At room temperature, it actually works with a single supply near or below +.7V; as supply voltage decreases, however, switch on-resistance becomes very high. D EXTERNAL BLOCKING DIODE Overvoltage Protection Proper power-supply sequencing is recommended for all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings can cause permanent damage to the device. Always sequence on first, followed by the logic inputs and analog signals. If power-supply sequencing is not possible, add two small signal diodes (D, D2) in series with the supply pins for overvoltage protection (Figure ). Adding diodes reduces the analog-signal range to one diode drop below and one diode drop above, but does not affect the device s low switch resistance and low leakage characteristics. Device operation is unchanged, and the difference between and should not exceed 6V. These protection diodes are not recommended if signal levels must extend to ground. High-Frequency Performance In 5Ω systems, signal response is reasonably flat up to 5MHz (see the Typical Operating Characteristics). Above 2MHz, the on response has several minor peaks that are highly layout dependent. The problem is not turning the switch on, but turning it off. The off-state switch acts like a capacitor and passes higher frequencies with less attenuation. At MHz, off-isolation is about -5dB in 5Ω systems, becoming worse (approximately 2dB per decade) as frequency increases. Higher circuit impedances also degrade off-isolation. Adjacent channel attenuation is about 3dB above that of a bare IC socket and is entirely due to capacitive coupling. TRANSISTOR COUNT: 478 Chip Information * * * * D2 EXTERNAL BLOCKING DIODE *INTERNAL PROTECTION DIODES Figure. Overvoltage Protection Using External Blocking Diodes 7

8 2: Analog Multiplexer V AO 5Ω AO NO NC V NO_ V IH +.5V V AO Test Circuits/Timing Diagrams 5% t R < 5ns t F < 5ns 9% COM R L C L * t OFF t ON *C L INCLUDES STRAY CAPACITANCE. Figure 2. Turn-On and Turn-Off Times V AO 5Ω AO NC, NO V N V IH +.5V V AO 5% t R < 5ns t F < 5ns COM R L C L * V COM 9% *C L INCLUDES STRAY CAPACITANCE. t BBM Figure 3. Break-Before-Make Interval OR AO NC, NO R G V V G V COM 5Ω C L * VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE- TRANSFER ERROR Q WH THE CHANNEL TURNS OFF. *C L INCLUDES STRAY CAPACITANCE. Q = C L Figure 4. Charge Injection 8

9 2: Analog Multiplexer nf OR AO NC, NO COM Test Circuits/Timing Diagrams (continued) NETWORK ANALYZER V IN 5Ω 5Ω OFF-ISOLATION = 2log V IN V ON-LOSS = 2log OUT V IN MEAS REF CROSSTALK = 2log V IN 5Ω 5Ω NOTES: MEASUREMTS ARE STANDARDIZED AGAINST SHORTS AT SOCKET TERMINALS. OFF-ISOLATION IS MEASURED BETWE COM AND "OFF" NO TERMINAL ON EACH SWITCH. ON-LOSS IS MEASURED BETWE COM AND "ON" NO TERMINAL ON EACH SWITCH. CROSSTALK IS MEASURED FROM ONE CHANNEL TO ALL OTHER CHANNELS. SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED. Figure 5. Off-Isolation, On-Loss, and Crosstalk OR AO NC, NO COM MHz CAPACITANCE ANALYZER Figure 6. Capacitance 9

10 2: Analog Multiplexer Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to QSOP.EPS PACKAGE OUTLINE, QSOP.5",.25" LEAD PITCH 2-55 F TSSOP4.4mm.EPS PACKAGE OUTLINE, TSSOP 4.4mm BODY 2-66 I

11 2: Analog Multiplexer Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to N E H INCHES MILLIMETERS DIM MIN MAX MIN MAX A A B C e.5 BSC.27 BSC E H L SOICN.EPS TOP VIEW VARIATIONS: DIM D D D INCHES MILLIMETERS MIN MAX MIN MAX N MS AA AB AC D A C e B A FRONT VIEW L SIDE VIEW -8 PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE,.5" SOIC APPROVAL DOCUMT CONTROL NO. REV. 2-4 B

12 2: Analog Multiplexer Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to 2,6,2, 24L QFN.EPS PACKAGE OUTLINE 2,6,2,24L QFN, 4x4x.9 MM 2-6 E 2 PACKAGE OUTLINE 2,6,2,24L QFN, 4x4x.9 MM 2-6 E 2 2 2

13 2: Analog Multiplexer Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to 2,6,2, 24L QFN.EPS PACKAGE OUTLINE 2,6,2,24L QFN, 4x4x.9 MM 2-6 E 2 PACKAGE OUTLINE 2,6,2,24L QFN, 4x4x.9 MM 2-6 E 2 2 Revision History Pages changed at Rev 3: 7, 3 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 2 San Gabriel Drive, Sunnyvale, CA Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.

0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches

0.8Ω, Low-Voltage, Single-Supply Dual SPST Analog Switches 19-116; Rev ; 1/6.Ω, Low-Voltage, Single-Supply Dual SPST General Description The are low on-resistance, low-voltage, dual single-pole/single-throw (SPST) analog switches that operate from a single +1.6V

More information

PART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO

PART MAX4503CPA MAX4503CSA. Pin Configurations 1 5 V+ COM N.C. V+ 4 MAX4504 MAX4503 DIP/SO 9-064; Rev ; /07 Low-Voltage, Dual-Supply, SPST, General Description The are low-voltage, dual-supply, single-pole/single-throw (SPST), CMOS analog switches. The is normally open (NO). The is normally

More information

0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer

0.8Ω, Low-Voltage, 4-Channel Analog Multiplexer General Description The is a low on-resistance, low-voltage, 4-channel CMOS analog multiplexer that operates from a single 1.6V to 3.6V supply. This device has fast switching speeds (t ON = 25ns, t OFF

More information

Multiplexers/Switches

Multiplexers/Switches EVALUATION KIT AVAILABLE / General Description The / are low-voltage, single-supply CMOS analog switches configured as a 4-channel multiplexer/demultiplexer () and a double-pole/double-throw (DPDT) switch

More information

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches 19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard

More information

ON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT

ON SWITCH NONE COM-NO0 COM-NO1 COM-NO2 COM-NO3 ADDA ADDB X = DON T CARE N.C. = NO CONNECT 9-224; Rev ; /8 Low-Voltage, 6, 4: Analog Multiplexer in QFN General Description The MAX474 low-voltage, 4-channel analog multiplexer operates from a single +.8V to +.V supply. The MAX474 features break-before-make

More information

20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP

20Ω, 300MHz Bandwidth, Dual SPDT Analog Switch in UCSP 9-2626; Rev ; /2 2, 3MHz Bandwidth, Dual SPDT Analog General Description The low-voltage, low on-resistance (R ON ), dual single-pole/double throw (SPDT) analog switch operates from a single +.8V to +5.5V

More information

MAX4734 LOGIC NO1 GND. Maxim Integrated Products 1

MAX4734 LOGIC NO1 GND. Maxim Integrated Products 1 9-238; Rev ; 5/4.8Ω, Low-Voltage, 4-Channel General Description The is a low on-resistance, low-voltage, 4- channel CMOS analog multiplexer that operates from a single.6v to 3.6V supply. This device has

More information

Precision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers

Precision, 8-Channel/Dual 4-Channel, Low-Voltage, CMOS Analog Multiplexers 9-299; Rev. 6; 6/7 Precision, 8-Channel/Dual 4-Channel, General Description The precision, monolithic, CMOS analog multiplexers (muxes) offer low on-resistance (less than Ω), which is matched to within

More information

MAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES

MAX4740ETE+ MAX4740EVE+ MAX4740HETE+ MAX4740HEVE+ TOP VIEW INTERNAL SPEAKER EXTERNAL HEADPHONES COM4 EXTERNAL HEADPHONES 19-558; Rev 1; 11/7 Quad SPDT Audio Switches General Description The low on-resistance (.61Ω typ) analog switches operate from a single 1.6V to 5.5V supply. The are quad, singlepole, double-throw (SPDT)

More information

Low-Voltage, High-Speed, Quad, SPST CMOS Analog Switches

Low-Voltage, High-Speed, Quad, SPST CMOS Analog Switches 9-5; Rev ; 7/99 Low-Voltage, High-Speed, Quad, SPST General Description The quad, low-voltage, high-speed, single-pole/single-throw (SPST) analog switches are pin compatible with the industry-standard

More information

TOP VIEW COUT1 COM2. Maxim Integrated Products 1

TOP VIEW COUT1 COM2. Maxim Integrated Products 1 19-77; Rev ; 7/4.75Ω, Dual SPDT Audio Switch with General Description The dual, single-pole/double-throw (SPDT) switch operates from a single +2V to +5.5V supply and features rail-to-rail signal handling.

More information

TOP VIEW COM2. Maxim Integrated Products 1

TOP VIEW COM2. Maxim Integrated Products 1 19-3472; Rev ; 1/4 Quad SPST Switches General Description The quad single-pole/single-throw (SPST) switch operates from a single +2V to +5.5V supply and can handle signals greater than the supply rail.

More information

0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch

0.6Ω, Low-Voltage, Single-Supply, Dual SPDT Analog Switch .6Ω, Low-Voltage, Single-Supply, Dual SPDT General Description The is a low on-resistance, low-voltage, dual single-pole/double throw (SPDT) analog switch that operates from a single 1.6V to 4.2V supply.

More information

MAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF

MAX4680CWE. Pin Configurations/Functional Diagrams/Truth Tables N01 N.C. COM1 V- MAX4690 COM2 IN2 N.C. NO2 SSOP/SO/DIP SWITCH 2 ON OFF 1 OFF 19-1513; Rev ; 7/99 General Description The dual analog switches feature low on-resistance of 1.25Ω max. On-resistance is matched between switches to.3ω max and is flat (.3Ω max) over the specified signal

More information

Low-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability

Low-Voltage, Dual SPDT, Audio Clickless Switches With Negative Rail Capability 19-563; Rev ; 5/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single pole/double throw) audio switches feature negative signal capability that allows signals as low as -

More information

MAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC "0" INPUT

MAX4684/MAX4685 OFF ON 1 SWITCHES SHOWN FOR LOGIC 0 INPUT 19-1977; Rev 4; 1/9.5Ω/.8Ω Low-Voltage, Dual SPDT General Description The low on-resistance (R ON ), lowvoltage, dual single-pole/double-throw (SPDT) analog switches operate from a single +1.8V to +5.5V

More information

5Ω, Quad, SPST, CMOS Analog Switches

5Ω, Quad, SPST, CMOS Analog Switches 9-393; Rev ; 8/99 5Ω, Quad, SPST, CMOS Analog Switches General Description The quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to.5ω max and is flat (.5Ω max)

More information

MAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF

MAX4661CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NC2 V- NO2 MAX4662 NO3 COM3 IN3 SSOP/SO/DIP MAX4662 LOGIC SWITCH OFF 9-56; Rev ; 7/99 General Description The // quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat (.5Ω max) over the specified signal

More information

10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches

10Ω, Quad, SPST, +3V Logic-Compatible Analog Switches 19-218; Rev 1; 9/8 1Ω, Quad, SPST, +3V Logic-Compatible General Description Maxim s analog switches feature low on-resistance (1Ω max) and 1.5Ω onresistance matching between channels. These switches are

More information

MAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches

MAX4751/MAX4752/MAX Ω, Low-Voltage, Single-Supply Quad SPST Analog Switches // General Description The // are low on-resistance, low-voltage, quad, single-pole/single-throw (SPST) analog switches that operate from a single +1.V to +3.V supply. These devices have fast switching

More information

Pin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1

Pin Configurations/Functional Diagrams/Truth Table COM COM GND MAX4644 OFF OFF. Maxim Integrated Products 1 9-7; Rev ; 3/ High-Speed, Low-Voltage, 4Ω, General Description The is a single-pole/double-throw (SPDT) switch that operates from a single supply ranging from +.8V to +.V. It provides low 4Ω on-resistance

More information

Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability

Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability 19-563; Rev 1; 11/6 Low-Voltage, Dual SPDT, Audio Clickless General Description The MAX4744/MAX4744H/MAX4745/MAX4745H/ dual SPDT (single-pole/double-throw) audio switches feature negative signal capability

More information

2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package

2.5Ω, Low-Voltage, SPST/SPDT Analog Switches in UCSP Package 19-242; Rev 1; 2/3 2.5Ω, Low-Voltage, SPST/SPDT General Description The low on-resistance (R ON ), low-voltage analog switches operate from a single +1.8V to +5.5V supply. The / are single-pole/single-throw

More information

MAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF

MAX4601CWE. Pin Configurations/Functional Diagrams/Truth Tables IN2 NO2 MAX4602 NO3 COM3 IN3 SSOP/SO/DIP MAX4602 LOGIC SWITCH OFF 9-396; Rev ; /99 2.5Ω, Quad, SPST, General Description The MAX46/MAX462/MAX463 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to.5ω max and is flat

More information

50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP

50Ω, Low-Voltage, Quad SPST/Dual SPDT Analog Switches in WLP 9-266; Rev 3; /2 5Ω, Low-Voltage, Quad SPST/Dual SPDT Analog General Description The low-voltage, quad single-pole single-throw (SPST)/dual single-pole/double-throw (SPDT) analog switches operate from

More information

MAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1

MAX4723EUA -40 C to +85 C 8 µmax MAX4722 MAX4723. Pin Configurations/Functional Diagrams/Truth Tables C NC1 IN1 UCSP. Maxim Integrated Products 1 9-2632; Rev ; /2 4.5Ω Dual SPST Analog Switches in UCSP General Description The MAX472/MAX4722/ low-voltage, low onresistance (R ON ), dual single-pole/single throw (SPST) analog switches operate from

More information

Pin Configurations/Functional Diagrams/Truth Tables COM SC70-6 SC70-6 PIN 5 5 XYZ NOTE: SC70-5 PACKAGE HAS LETTERING NEAREST PIN 5.

Pin Configurations/Functional Diagrams/Truth Tables COM SC70-6 SC70-6 PIN 5 5 XYZ NOTE: SC70-5 PACKAGE HAS LETTERING NEAREST PIN 5. 9-359; Rev ; / General Description The MAX76/MAX77 single-pole/single-throw (SPST) switches operate from a single.8v to 5.5V supply. The MAX76 is a normally closed (NC) switch and the MAX77 is the normally

More information

Dual SPDT Negative Rail Analog Switches with ±VCC Capability

Dual SPDT Negative Rail Analog Switches with ±VCC Capability 19-4244; Rev 1; 12/8 EVALUATION KIT AVAILABLE Dual SPDT Negative Rail Analog Switches General Description The MAX1454/MAX1455/MAX1455A/MAX1456 dual single-pole/double-throw (SPDT) audio switches feature

More information

Maxim Integrated Products 1

Maxim Integrated Products 1 9-362; Rev 3; 6/7 Quad, SPST Analog Switch General Description The quad analog switch features on-resistance matching (4Ω max) between switches and guarantees on-resistance flatness over the signal range

More information

PART MAX4631ESE MAX4633CPE MAX4632EPE MAX4633MJE MAX4632CSE MAX4632CPE MAX4632ESE MAX4632MJE MAX4633CSE MAX4633ESE MAX4633EPE

PART MAX4631ESE MAX4633CPE MAX4632EPE MAX4633MJE MAX4632CSE MAX4632CPE MAX4632ESE MAX4632MJE MAX4633CSE MAX4633ESE MAX4633EPE 19-1515; Rev ; 7/99 Fault-Protected, High-oltage, General Description The high-voltage, dual analog switches are pin compatible with the industry-standard DG41/DG43/DG45. They upgrade the existing devices

More information

MAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications

MAX4737/MAX4738/ MAX Ω Quad SPST Analog Switches in UCSP. General Description. Benefits and Features. Applications General Description The MAX77/MAX78/ low-voltage, low onresistance (R ), quad single-pole/single throw (SPST) analog switches operate from a single +.8V to +5.5V supply. These devices are designed for

More information

High-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches

High-Speed, Low-Voltage, 4Ω, Dual SPST CMOS Analog Switches 9-; Rev ; / High-Speed, Low-oltage, Ω, Dual SPST General Description The MAX//MAX are monolithic, dual, single-pole/single-throw (SPST) switches that can operate from a single supply ranging from +. to

More information

Quad SPST CMOS Analog Switches

Quad SPST CMOS Analog Switches 9-3960; Rev 3; 6/06 Quad SPST CMOS Analog Switches General Description The are normally open, quad singlepole single-throw (SPST) analog switches. These CMOS switches can be continuously operated with

More information

High-Bandwidth T1/E1 Dual-SPDT Switches/ 4:1 Muxes

High-Bandwidth T1/E1 Dual-SPDT Switches/ 4:1 Muxes 19-3915; Rev 1; 1/7 High-Bandwidth Dual-SPDT Switches/ General Description The / high-bandwidth, low-on-resistance analog dual SPDT switches/4:1 multiplexers are designed to serve as integrated protection

More information

Low-RON, Dual-SPST/Single-SPDT Clickless Switches with Negative Rail Capability

Low-RON, Dual-SPST/Single-SPDT Clickless Switches with Negative Rail Capability 9-3775; Rev 2; 5/6 Low-RON, Dual-SPST/Single-SPDT Clickless General Description The switches feature negative signal capability that allows signals below ground to pass through without distortion. The

More information

SGM48754 Quad SPST CMOS Analog Switch

SGM48754 Quad SPST CMOS Analog Switch GENERAL DESCRIPTION The is a CMOS analog switch configured as quad SPST. This CMOS device can operate from 2.5V to 5.5V single supplies. Each switch can handle rail-to-rail analog signals. The off-leakage

More information

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch 19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333

More information

Precision, 4-Channel/Dual 2-Channel, Low-Voltage, CMOS Analog Multiplexers

Precision, 4-Channel/Dual 2-Channel, Low-Voltage, CMOS Analog Multiplexers 9-7; Rev. ; /98 Precision, 4-Channel/Dual 2-Channel, General Description The AX48/AX49 precision, monolithic, COS analog multiplexers (muxes) offer low on-resistance (less than ), which is matched to within

More information

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch

Quad, Rail-to-Rail, Fault-Protected, SPDT Analog Switch 19-1452; Rev 1; 1/99 Quad, Rail-to-Rail, Fault-Protected, General Description The quad, single-pole/double-throw (SPDT), fault-protected analog switch is pin-compatible with the industry-standard MAX333

More information

S 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413

S 500µA (typ) Supply Current S TSSOP 16-Pin Package S -40 C to +85 C Ambient Temperature Range S Functionally Compatible to DG411, DG412, and DG413 19-572; Rev ; 12/1 Quad SPST +7V Analog Switches General Description The are analog switches with a low on-resistance of 1I (max) that conduct equally well in both directions. All devices have a rail-to-rail

More information

EVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches

EVALUATION KIT AVAILABLE 5.0Gbps PCI Express Passive Switches 19-77; Rev 2; 5/9 EVALUATION KIT AVAILABLE 5.Gbps PCI Express Passive Switches General Description The high-speed passive switches route PCI Express (PCIe) data between two possible destinations. The MAX4888A

More information

3.5Ω/7Ω Quad SPST Switches with Over-Rail Signal Handling

3.5Ω/7Ω Quad SPST Switches with Over-Rail Signal Handling 19-71; Rev ; 1/.5Ω/7Ω Quad SPST Switches with Over-Rail General Description The MAX851/MAX851H/MAX85/MAX85H family of quad single-pole/single-throw (SPST) switches operates from a single +2V to +5.5V supply

More information

Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability

Low-Voltage, Dual SPDT, Audio Clickless Switches with Negative Rail Capability 9-352; Rev 2; /6 Low-Voltage, Dual SPDT, Audio Clickless General Description The dual SPDT (single-pole/double-throw) switches feature negative signal capability that allows signals below ground to pass

More information

MP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches

MP2735/MP2736 Low-Voltage 0.45Ω Dual SPDT Analog Switches The Future of Analog IC Technology GENERAL DESCRIPTION The MP2735/MP2736 are low voltage, low onresistance, dual single-pole, double-throw (SPDT) monolithic CMOS analog switches designed for high performance

More information

MAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch

MAX V Capable, Low-R ON, Beyond-the-Rails DPDT Analog Switch Click here for production status of specific part numbers. MAX2327 12V Capable, Low-R ON, General Description The MAX2327 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches

More information

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications. Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and

More information

0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information

0.5Ω, Low-Voltage, Single-Supply SPST Analog Switches MAX4626/MAX4627/ MAX4628. General Description. Benefits and Features. Ordering Information .5Ω, Low-Voltage, Single-Supply General Description The // are low-on-resistance, low-voltage, single-pole/single-throw (SPST) analog switches that operate from a +.8V to +5.5V single supply. The is normally

More information

MAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1

MAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1 19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle signals greater than

More information

MAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch

MAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch General Description The quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range

More information

The UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage

The UM4684 is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage General Description 0.5Ω Low-Voltage Dual SPDT Analog Switch H CSP10 2.0 1.5 EEUE MSOP10 The is a sub 1Ω (0.5Ω at 2.7V) dual SPDT analog switch designed for low voltage applications. The has on-resistance

More information

*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1

*EP = exposed pad TOP VIEW COM N.C. GND. Maxim Integrated Products 1 9-984; Rev ; 5/ High-urrent, Ω, SPST, MOS General Description Maxim s are medium-voltage MOS analog switches with low on-resistance of Ω max, specifically designed to handle large switch currents. With

More information

TOP VIEW. Maxim Integrated Products 1

TOP VIEW. Maxim Integrated Products 1 9-987; Rev ; 9/3 5MHz, Triple, -Channel Video General Description The is a triple, wideband, -channel, noninverting gain-of-two video amplifier with input multiplexing, capable of driving up to two back-terminated

More information

16-Channel CMOS Analog Multiplexer. Memory

16-Channel CMOS Analog Multiplexer. Memory 306 16-Channel CMOS Analog Multiplexer FEATURES: RAD-PAK technology radiation-hardened against natural space radiation Total dose hardness: - > 50 Krad (Si), depending upon space mission Excellent Single

More information

IF Digitally Controlled Variable-Gain Amplifier

IF Digitally Controlled Variable-Gain Amplifier 19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The

More information

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch

SGM4684 Chip Scale Packaging, Low-Voltage 0.4Ω, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM4684 is a dual, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single 1.8V to 5.5V power supply.

More information

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774

CMOS 3 V/5 V, Wide Bandwidth Quad 2:1 Mux ADG774 a FEATURES Low Insertion Loss and On Resistance: 2.2 Typical On Resistance Flatness.5 Typical Automotive Temperature Range 4 C to +125 C 3 db Bandwidth = 24 MHz Single 3 V/5 upply Operation Rail-to-Rail

More information

BCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1

BCT4699ETE. Applications. Ordering Information. December, 2013, REV1.1 BCT4699 General Description The BCT4699 is configured as a quad-spdt switch with two common control inputs. Each digital input controls two pairs of SPDT switches. The switches are fully bi-directional,

More information

PART MAX4887ETE +5V R0 G0 B0 R1 G1 B1 MAX4887 R2 G2 B2 SEL EN QP GND. Maxim Integrated Products 1

PART MAX4887ETE +5V R0 G0 B0 R1 G1 B1 MAX4887 R2 G2 B2 SEL EN QP GND. Maxim Integrated Products 1 19-3972; Rev ; 2/6 Triple Video Switch General Description The triple, high-frequency switch is intended for notebooks and monitors to permit RGB signals to be switched from one driver to one of two loads

More information

Functional Diagrams, Pin Configurations, and Truth Table

Functional Diagrams, Pin Configurations, and Truth Table Ω Ω µ With +12V power supply, the PS4066/PS4066A guarantee

More information

ADG1411/ADG1412/ADG1413

ADG1411/ADG1412/ADG1413 .5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz

Low-Jitter, 8kHz Reference Clock Synthesizer Outputs MHz 19-3530; Rev 0; 1/05 Low-Jitter, 8kHz Reference General Description The low-cost, high-performance clock synthesizer with an 8kHz input reference clock provides six buffered LVTTL clock outputs at 35.328MHz.

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

FEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V )

FEATURES BENEFITS APPLICATIONS. PARAMETER LIMIT UNIT Reference to GND V to +6 IN, COM, NC, NO a -0.3 to (V ) DESCRIPTION www.vishay.com.5, High Bandwidth, Dual SPDT Analog Switch The DGE is a low-voltage dual single-pole / double-throw monolithic CMOS analog switch. Designed to operate from. V to 5.5 V power

More information

PI5A121/PI5A122/PI5A124

PI5A121/PI5A122/PI5A124 es Features Single-Supply Operation (+V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ. with 5V supply) Minimizes Distortion and Error Voltages On-Resistance Flatness, Ω typ.

More information

0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability

0.45, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability 5, Low Voltage Dual SPDT Analog Switch with Negative Swing Audio Capability DESCRIPTION The is a dual SPDT low on-resistance switch designed to from a single 1.6 V to 5.5 V power supply. It is a bi-directional

More information

0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch

0.4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch .4, Low Resistance and Capacitance, Dual DPDT / Quad SPDT Analog Switch DESCRIPTION The DG2523 and DG2524 are four-channel single-pole double-throw (SPDT) analog switches. The DG2523 has two control inputs

More information

FEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number

FEATURES DG2538, MSOP-10 V+ 1 V+ COM 1. Top View. Temperature Range Package Part Number Dual SPST Switches DG, DG8, DG9 DESCRIPTION The DG, DG8, and DG9 are low voltage, precision dual SPST switches that can be operated in a single supply or in a dual supply configuration power supply with

More information

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch

SGM3003 Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch GENERAL DESCRIPTION The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted

More information

PART MAX4584EUB MAX4585EUB TOP VIEW

PART MAX4584EUB MAX4585EUB TOP VIEW 19-1521; Rev ; 8/99 General Description The serial-interface, programmable switches are ideal for multimedia applicatio. Each device contai one normally open (NO) single-pole/ single-throw (SPST) switch

More information

Dual DPDT Ultra-Low R ON

Dual DPDT Ultra-Low R ON General Description Dual DPDT Ultra-Low R ON Analog Switch UM3699A UM3699A QFN16 3.0 3.0 The UM3699A are dual independent ultra low R ON DPDT analog switches. These devices are designed for low operating

More information

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794

Low Voltage, 300 MHz Quad 2:1 Mux Analog HDTV Audio/Video Switch ADG794 Low Voltage, 300 MHz Quad 2: Mux Analog HDTV Audio/Video Switch FEATURES Bandwidth: 300 MHz Low insertion loss and on resistance: 5 Ω typical On-resistance flatness: 0.7 Ω typical Single 3.3 V/5 V supply

More information

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS

ADG1606/ADG Ω RON, 16-Channel, Differential 8-Channel, ±5 V,+12 V,+5 V, and +3.3 V Multiplexers FEATURES FUNCTIONAL BLOCK DIAGRAMS 4.5 Ω RON, 6-Channel, Differential 8-Channel, ±5 V,+2 V,+5 V, and +3.3 V Multiplexers ADG66/ADG67 FEATURES 4.5 Ω typical on resistance. Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3

More information

SGM Ω, Low Voltage Quad, SPDT Analog Switch

SGM Ω, Low Voltage Quad, SPDT Analog Switch GENERAL DESCRIPTION The SGM3699 is a quad, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch that is designed to operate from a single 1.8V to 4.35V power

More information

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636 FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation

More information

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849

3 V/5 V CMOS 0.5 Ω SPDT/2:1 Mux in SC70 ADG849 3 V/5 V CMOS.5 Ω SPT/2: Mux in SC7 AG849 FEATURES Ultralow on-resistance:.5 Ω typical.8 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion:.3 Ω typical.24 Ω maximum RON flatness High

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44601 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

27pF TO ADC C FILTER (OPTIONAL) Maxim Integrated Products 1

27pF TO ADC C FILTER (OPTIONAL) Maxim Integrated Products 1 19-215; Rev 6; 9/6 EVALUATION KIT AVAILABLE RF Power Detectors in UCSP General Description The wideband (8MHz to 2GHz) power detectors are ideal for GSM/EDGE (MAX226), TDMA (MAX227), and CDMA (MAX225/MAX228)

More information

UM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications

UM Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN General Description. Applications 0.5Ω Ultra Low ON-Resistance Dual SPDT Analog Switch UM5223 QFN10 1.8 1.4 General Description The UM5223 is a low on-resistance (R ON ), dual single-pole/double-throw (SPDT) analog switch operates from

More information

MAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1

MAX4852 MAX4852H NC1 COM1 NO1 IN1 IN2 NC2 COM2 NO2. Maxim Integrated Products 1 19-7; Rev ; 7/ Dual SPDT Analog Switches with General Description The MAX8/MAX8H/MAX8/MAX8H family of dual SPDT (single-pole/double-throw) switches operate from a single +V to +.V supply and can handle

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM44599 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM4462 is a dual, high-speed, low-voltage, double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single 1.8V to 5.5V power supply. It features high-bandwidth

More information

3V 10-Tap Silicon Delay Line DS1110L

3V 10-Tap Silicon Delay Line DS1110L XX-XXXX; Rev 1; 11/3 3V 1-Tap Silicon Delay Line General Description The 1-tap delay line is a 3V version of the DS111. It has 1 equally spaced taps providing delays from 1ns to ns. The series delay lines

More information

LVDS or LVTTL/LVCMOS Input to 14 LVTTL/LVCMOS Output Clock Driver

LVDS or LVTTL/LVCMOS Input to 14 LVTTL/LVCMOS Output Clock Driver 19-2392; Rev ; 4/2 LVDS or LVTTL/LVCMOS Input to General Description The 125MHz, 14-port LVTTL/LVCMOS clock driver repeats the selected LVDS or LVTTL/LVCMOS input on two output banks. Each bank consists

More information

WAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//:

WAS4899Q WAS4899Q. Descriptions. Features. Order information. Applications. Low On Resistance, Quad SPDT Analog Switch. Http//: WAS4899Q Low On Resistance, Quad SPDT Analog Switch Http//:www.willsemi.com Descriptions The WAS4899Q is a high performance, quad, Single Pole Double Throw (SPDT) analog switch that features ultra-low

More information

3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers

3.9, 8-Channel / Dual 4-Channel, ± 15 V, +12 V, ± 5 V Precision Multiplexers DG148E, DG149E 3.9, 8-Channel / Dual 4-Channel, ± 15, +12, ± 5 Precision Multiplexers DESCRIPTION The DG148E is a precision analog multiplexer comprising eight single-ended channels. The DG149E is a dual

More information

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888 FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying

More information

Ultra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches

Ultra-Small, Low-RON, Beyond-the-Rails DPDT Analog Switches EVALUATION KIT AVAILABLE MAX14689 General Description The MAX14689 ultra-small, low-on-resistance (R ON ) double-pole/double-throw (DPDT) analog switches feature Beyond-the-Rails capability that allows

More information

Low-Charge Injection, 16-Channel, High-Voltage Analog Switches MAX14800 MAX14803

Low-Charge Injection, 16-Channel, High-Voltage Analog Switches MAX14800 MAX14803 19-4484; Rev 1; 9/09 Low-Charge Injection, 16-Channel, General Description The provide high-voltage switching on 16 channels for ultrasonic imaging and printer applications. The devices utilize HVCMOS

More information

Dual SPDT Analog Switch

Dual SPDT Analog Switch Dual SPDT Analog Switch DESCRIPTION The DG9236 is a CMOS, dual SPDT analog switch designed to operate from = 2.7 V to = 6 V max. operating, single supply. All control logic inputs have a guaranteed.8 V

More information

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch

SGM Ω, High Speed, Low Voltage Dual, DPDT Analog Switch GENERAL DESCRIPTION The SGM4461 is a high-speed, low-voltage, advanced dual-independent double-pole/double-throw (DPDT) CMOS analog switch that is designed to operate from a single +1.8V to +5.5V power

More information

6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable

6500V/µs, Wideband, High-Output-Current, Single- Ended-to-Differential Line Drivers with Enable 99 Rev ; /99 EVALUATION KIT AVAILABLE 65V/µs, Wideband, High-Output-Current, Single- General Description The // single-ended-todifferential line drivers are designed for high-speed communications. Using

More information

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436 Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6

More information

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch

SGM Ω Ultra Low ON-Resistance, Dual, SPDT Analog Switch GENERAL DESCRIPTION The SGM2267 is a dual single-pole/double-throw (SPDT) analog switch that is designed to operate from a single +1.8V to +4.2V power supply. Targeted applications include battery powered

More information

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 .5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:

More information

CLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1

CLK_EN CLK_SEL. Q3 THIN QFN-EP** (4mm x 4mm) Maxim Integrated Products 1 19-2575; Rev 0; 10/02 One-to-Four LVCMOS-to-LVPECL General Description The low-skew, low-jitter, clock and data driver distributes one of two single-ended LVCMOS inputs to four differential LVPECL outputs.

More information

DG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix.

DG1411E, DG1412E, DG1413E. 1.5 On Resistance, ± 15 V / +12 V / ± 5 V, Quad SPST Switches. Vishay Siliconix. 1.5 On Resistance, ± 15 / +12 / ± 5, Quad SPST Switches DESCRIPTION The are ± 15 precision monolithic quad single-pole single-throw (SPST) CMOS analog switches. Built on a new CMOS process, the ishay Siliconix

More information

DG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS

DG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,

More information