Tender documents against NIT No. ITPS(WH)/ /04(P)C, for supply of FASTNERS on Annual Rate Contract basis

Transcription

1 Orissa Power Generation Corporation L i m i t e d Ib Thermal Power Station At/P.O:Banharpali,Dist.Jharsuguda, PIN:768234(Orissa) GRAM: IB THERMAL,Tel /222210,Fax: /54/30 pradeep.mahapatra@opgc.co.in ; pradipta.mohanty@opgc.co.in SAFE & CLEAN POWER IS OUR COMMITMENT AN ISO-14001; OHSAS ORGANISATION Tender documents against NIT No., for supply of FASTNERS on Annual Rate Contract basis Date of Sale of tender paper Date of Receipt of Bid Date of opening of tender Cost of Tender paper (non transferable) EMD 01/03/2008 to 15/03/2008 upto 17 hrs. 19/03/2008 upto 13 hrs ( Extended)at undersigned office 19/03/ HRS. Rs only. Rs.5000/- only Note: Before Submission of bid please ensure proper documentation is made in technical bid and price bid as mentioned in the bid. Manager(P),Purchase;Warehouse. Page 1 of 17

2 ORISSA POWER GENERATION CORPORATION LTD. IB THERMAL POWER STATION AT/PO: BANHARPALI DIST: JHARSUGUDA (ORISSA), INDIA Telefax No /10 address: NOTICE INVITING TENDER NIT No. ITPS/(WH)/ /04(P) Dt. 19/02/2008 Orissa Power Generation Corporation Limited (An ISO:14001 & OHSAS:18001 Company in the state of Orissa) having coal based 2x210 MW thermal power plant at IB Thermal Power Station invites following tenders: Sl. Tender Description EMD in Rs. Cost of Tender No. No. Document in Rs. 01. Annual Rate Contract for supply of following items during : i) 04(P)/A Bearings 10, ii) 04(P)/B Electrodes 5, iii) 04(P)/C Fasteners 5, iv) 04(P)/D Packings & Gaskets (Non-asbestos) 5, Tender Document will be sold from 01/03/2008 to 15/03/2008 upto 17:00 Hrs. from the office of the Sr. Manager, Warehouse, ITPS, Banharpalli, Jharsuguda against submission of DD (Non-refundable) drawn in favour of OPGC Ltd on SBI, Banharpalli (Code 9510)/Andhra Bank, Adapada (Code 0662)/Central Bank of India, Belpahar. Tender documents can also be downloaded from our website and submit the tender cost in shape of DD along with the bid. Last date of receipt of tenders is 19/03/2008 up to 13:00 Hrs. Date of opening of tender (as per bid instruction) is 19/03/2008 at 15:00 Hrs. M/s OPGC Ltd. reserves the right to accept/reject/split any tender without assigning any reason thereof and will not be responsible for any delay in postal/courier. Detailed NIT is available at our website Manager, Warehouse Page 2 of 17

3 TENDER SPECIFICATION FOR SUPPLY OF MATERIALS TO IB THERMAL POWER STATION Ib Thermal Power Station, At/PO: Banharpali, Dist. Jharsuguda (Orissa), PIN: is a unit of Orissa Power Generation Corporation Limited a Govt. of Orissa undertaking having 49% of share by AES America engaged in generation of 2x210 MW Thermal Electric Power. The Plant site is about 17 Kms. from Belpahar Railway Station and 40 Kms.from Jharsuguda Rly. Station on S.E. Rly. on the Mumbai- Howrah main line. Sealed tenders are invited from the reputed manufacturers/ authorized stockiest only in their own letter heads for supply of different FASTNERS required for operation & maintenance of Ib Thermal Power Station during the year as per the details given in the Annexure-I enclosed. The tenderers must be either manufacturer or authorized dealer and have in line experience, financial capability and have supplied such items to other Industrial concerns of repute. The tenderer must submit relevant credentials in support of their claim of being manufacturer/authorized dealer and copies of purchase orders in support of supply of said items to other concerns of repute alongwith their offer. The bidders shall have to submit their offer in two parts. Part-I The Bidders shall have to submit Part-II 1. Their credentials in support of their experience & Banker's certificate in support of Financial capability along with a statement of Asset & Liability. 2. EMD mentioned ( Rs. 5000/- only) in shape of DD payable on State Bank of India (Code No. 9510)/Central Bank of India, Ib Thermal Power Station, Banharpali, Jharsuguda in favour of Orissa Power Generation Corporation Limited. 3. Photocopy of PAN NO; 4. TIN NO. 5. Authorized dealership certificate /Manufacture Certificate. Part-II is the Price Bid which should contain the price & details of other commercial terms including trade discount, payment terms, validity, mode of despatch, taxes & duties, Packing, forwarding, freight, insurance & Entry Tax etc. PARTIES HAVE TO CLEARLY MENTION THE DISCOUNT OFFERED IN THE PRICE LIST. The above two bids should be sealed separately superscribing as Technical Bid/Price bid as the case may be and enclosed in third sealed envelope superscribing "N.I.T No. ITPS/(WH)/ /04(P)/C & date 19/02/2008 for supply of FASTNERS to ITPS due on 19/03/20087". Your offer should reach this office on or before 19/03/2008 upto 1 PM. Part-I (Technical Bid) shall be opened on same day at 3 PM in presence of either the bidder or their authorized representative. Parties who shall qualify in Technical bid shall be intimated to attend on a future date & venue to keep themselves present in the opening of Price Bid. In case the bid opening date is declared as holiday the bid shall be opened in the next working date. Tenders without EMD shall not be accepted. Offer received late due to postal or courier delay shall not be entertained. The bidder at their interest should ensure delivery of the bid well in advance. Page 3 of 17

4 Terms & Conditions of Supply 01.Price : 02.Taxes & Duties: 03.Despatch: 04.Validity: 05.Delivery: 06.Standard: 07.Inspection/Testing: 08.Payment: 09.Guarantee: 10.ITCC & STCC: The net price offered shall be on the basis of delivery F.O.R, Ib Thermal Power Station site including excise duty, sales tax, packing, forwarding, freight, insurance & entry tax etc. Rate of Packing forwarding, Excise Duty; Sales Tax, VAT,Transportation & other statutory levies should be clearly indicated item wise, so that changes if any during contract period can be given effect to. The consignments shall be despatched to Ib Thermal Power Station to the consignee on door delivery and freight paid basis. The price quoted should be firm for one year w.e.f date of opening of Technical Bid. Delivery of the materials shall be commenced within 30 days from the date of issue of LOI/PO. The consumption pattern during the year and delivery schedule shall be mentioned in the P.O. Beyond the delivery period per week shall be applicable towards liquidated damage. The materials to be supplied shall be strictly as per relevant IS. Inspection & Testing shall be carried out by Engineer after receipt of materials at our site. Your representative may remain present. Batch Certificate to be submitted along with the supply. OPGCL may ask report Metallurgical Test Report from govt. Approved laboratory along with the supply. OPGCL may incorporate any other testing or inspection if required at your cost. 100% payment shall be made within 30 days from the date of acceptance of materials on submission of bills in triplicate. The merchantability, fitness & quality of the materials should be guaranteed against any manufacturing defect or bad workmanship for a period of 12 months from the date of use or 18 months from the date of supply whichever is earlier. Bidders shall be required to furnish the Photo copy of valid PAN NO.; TIN NO. 11.Security Deposit: Your EMD will be converted as security deposit..p.o.security deposit shall be released after supply is complete. 12. Penalty: If the materials shall not be delivered within stipulated date of the value of the material not delivered per week of delay or part thereof subject to maximum5% of total value shall be deducted. In case the material are not supplied as per schedule M/s OPGCL reserves the right to procure from open market and recover the extra expenditure incurred from you. In case where delivery schedule Page 4 of 17

5 is not adhered to and there are increase in ED and Sales Tax and impose of new duties after scheduled delivery period you shall bear the impact of those levies. 13. Risk Purchase: The inability of the bidders to execute the order in accordance with delivery schedules will entitle M/s OPGCL to purchase the orders at the risk and cost of the vendors from other sources. The difference in amount shall be recovered from the dues of the vendors. Increase in tax structure due to delay in supply beyond contractual delivery period is to vendor account. 14. Loading: Loading of different factor of commercial terms will be done if the offer is not submitted in line with our tender. 15.Jurisdiction of Court: All or any differences or disputes arising out of or related to this order shall be decided by courts in Jharsuguda only. 16. STOCK: The agency has to keep the stock of the items and material to be supplied in the shortest possible time over confirmation by phone;mail;fax. ANNEXURE SL. NO Item Code Description UOM SHCS M12X50; 12.9 GRADE NO ALLINKEY BOLT 5X50 MM NO SOCKET HEAD cap screw 7/8"x2 1/2"(22x65) 12.9 GRADE NO Hex Full-T Bolt,G8.8,M 7/8"x3" NO Hex Full-T Bolt,G8.8, M1"x5" NO COUNTER SHUNKHEAD BOLT12.9 GRADE M16X25 NO COUNTER SHUNK HEAD BOLT M16X35;12.9 GRADE NO COUNTER SHUNK HEAD BOLT 12.9 GRADE M16X40 NO Hex Full-T Bolt,G4.6,M36x400 SET Hex Full-T Bolt,G4.6,M8x10 SET NO Hex Full-T Bolt,G10.9,M12x35 NO COUNTER SHUNK HEAD BOLT 5/8""X1" 12.9 g NO COUNTER SHUNK HEAD BOLT 5/8"X35MM";12.9 GRADE NO COUNTER SHUNK HEAD BOLT 5/8"X45"12.9 GRADE NO Hex Full-T Bolt,G10.9,M18x75 NO SOCKET HEAD BOLT 3/8""X21/2"" GRADE 12.9 SET /8"x3" SOCKET HEAD BOLT GRADE 12.9 NO SOCKET HEAD BOLT GRADE /16""X21/2 NO SOCKET HEAD BOLT GRADE /2""X2""" NO CSK BOLT GR 12.9 SIZE M20X140 MM NO CSK HEAD BOLT GR 12.9 OF 5/8'X2 1/2" NO Hex Full-T Bolt,G10.9,M5x30 NO Hex Full-T Bolt,G10.9,M10x25 NO Hex Full-T Bolt,G8.8,M12x40 NO Hex Full-T Bolt,G10.9,M6x35 NO Hex Full-T Bolt,G10.9,M6x25 NO Hex Full-T Bolt,G10.9,M8x30 NO Hex Full-T Bolt,G10.9,M12x40 NO Hex Full-T Bolt,G10.9,M16x60 NO Hex Full-T Bolt,G10.9,M16x70 NO ALLIENKEY BOLT 8X50 MM NO Hex Full-T Bolt,G10.9,M16x45 NO Hex Full-T Bolt,G10.9,M12x60 NO Hex Full-T Bolt,G10.9,M8x60 NO Page 5 of 17

6 Hex Full-T Bolt,G10.9,M6x50 NO Hex Full-T Bolt,G10.9,M10x50 NO Hex Full-T Bolt,G10.9,M16x40 NO Hex Head Bolt M20x200 minimum thread 60;10.9 GRADE NO Hex Full-T Bolt,G8.8,M8x40 NO Hex Full-T Bolt,G8.8,M20x250 NO Hex Full-T Bolt,G10.9,M18x70 NO M6x16 BSP Hex ScrewGrade8.8 NO Hex Full-T Bolt,G10.9,M16x80 NO Hex Full-T Bolt,G8.8,M12x20 NO Hex Full-T Bolt,G8.8,M3/8"x2 1/2" NO Hex Full-T Bolt,G10.9,M12x100 NO Hex Full-T Bolt,G8.8,M16x50 NO Hex Full-T Bolt,G10.9,M10x40 NO Hex Full-T Bolt,G8.8,M16x180 NO Hex Full-T Bolt,G8.8,M20x50 NO Hex Full-T Bolt,G8.8,M20x100 NO SOCKET HEAD BOLT FULL THREAD M30X90 M GR12.9 NO Hex Full-T Bolt,G10.9,M16x80 NO ALLEN BOLT M6X30 NO BOLT M12*1.7SP*120L; 8.8 GRADE NO Hex Full-T Bolt,G10.9,M10x120 NO Hex Full-T Bolt,G8.8,M20x80 NO Hex Full-T Bolt,G8.8,M24x40 NO Hex Full-T Bolt,G8.8,M24x90 NO Hex Nut,G8,M24 NO Hex Full-T Bolt,G10.9,M20x150 NO Hex Full-T Bolt,G10.9,M10x30 NO Hex Full-T Bolt,G10.9,M12x30 NO Allenkey Head Bolt M8x25Grade12.9 NO Hex Fine-T Bolt,G10.9,M12x35 NO Hex Full-T Bolt,G10.9,M16x50 NO Hex Head Bolt ½"x2"Grade8.8 NO Hex Head Bolt ¾"x2 ½"Grade8.8 NO Hex Head Bolt 1"x4"Grade8.8 NO Hex head Bolt 5/16"x2"Grade8.8 NO Hex Head Bolt 5/8"x1"Grade8.8 NO Hex Head Bolt 5/8"x2 ½"Grade8.8 NO Hex Full-T Bolt,G10.9,M10x12 NO Hex Full-T Bolt,G10.9,M10x150 NO Hex Full-T Bolt,G8.8,M10x20 NO Hex Full-T Bolt,G8.8,M10x25 NO Hex Full-T Bolt,G10.9,M10x35 NO Hex Full-T Bolt,G10.9,M10x60 NO Hex Full-T Bolt,G10.9,M10x80 NO Hex Full-T Bolt,G10.9,M12x120 NO Hex Full-T Bolt,G8.8,M12x120 NO Hex Full-T Bolt,G8.8,M12x55 NO Hex Full-T Bolt,G10.9,M12x80 NO Hex Full-T Bolt,G10.9,M14x80 NO Hex Full-T Bolt,G10.9,M16x100 NO Hex Full-T Bolt,G10.9,M16x120 NO Hex Full-T Bolt,G10.9,M16x130 NO Hex Full-T Bolt,G10.9,M16x150 NO Hex Full-T Bolt,G10.9,M16x40 NO Hex Full-T Bolt,G10.9,M16x75 NO Hex Full-T Bolt,G8.8,M18x70 NO Hex Full-T Bolt,G10.9,M20x100 NO Hex Full-T Bolt,G8.8,M20x150 NO Hex Full-T Bolt,G10.9,M20x200 NO Hex Full-T Bolt,G10.9,M20x50 NO Page 6 of 17

7 Hex Full-T Bolt,G10.9,M20x70 NO Hex Full-T Bolt,G10.9,M20x80 NO Hex Full-T Bolt,G8.8,M4x100 NO Hex Full-T Bolt,G8.8,M4x70 NO Hex Full-T Bolt,G10.9,M5x50 NO Hex Full-T Bolt,G10.9,M6x16 NO Hex Full-T Bolt,G8.8,M6x20 NO Hex Full-T Bolt,G10.9,M6x30 NO Hex Full-T Bolt,G8.8,M6x35 NO Hex Full-T Bolt,G10.9,M6x50 NO Hex Full-T Bolt,G8.8,M6x80 NO Hex Full-T Bolt,G10.9,M8x10 NO Hex Full-T Bolt,G10.9,M8x100 NO Hex Full-T Bolt,G8.8,M8x35 NO Hex Full-T Bolt,G8.8,M8x50 NO Hex Full-T Bolt,G8.8,M8x75 NO Hex Full-T Bolt,G10.9,M10x25 NO Hex Full-T Bolt,G10.9,M16x35 NO Hex Full-T Bolt,G10.9,M5x30 NO SocketHeadcapscrew M10x40 FTGrade12.9 NO Hex Full-T Bolt,G12.9,M 1 1/8"x10" NO Allenkey Head Bolt 5/8"x1"Grade12.9 NO Allenkey Head Bolt 5 ½"x2 ½Grade12.9 NO Allenkey Head Bolt 3/8"x2½"Grade12.9 NO CounterShunkHead Bolt5/8"x1½"Grade12.9 NO CounterShunkHead Bolt 5/8"x2"Grade12.9 NO Hex Fine-T Bolt,G10.9,M12x35 NO CSK Head Bolt M16x25Grade NO CSK Head Bolt M16x45Grade NO CSK HEAD BOLT M16x50Grade12.9 NO hex head bolt m24x190 thread length 100m NO Bolt(Lead Coated BrassL-30mmDia-05m NO Allen boltm5x45 NO Hex Full-T Bolt,G10.9,M24x35 NO CSK head bolt M16x130,10.9 grade NO H.H bolt & nut h.thread M24x160,8.8 gr. NO SS Bolt M8x25 F.T NO SS BOLT M 10X20 NO CSK Bolt M12x grade NO CSK Bolt M12x grade NO Hex. Bolt M12x65 SS-304(FT) NO Hex Nut,G10.9,M16 NO SELF LOCKING NUT M36 GR.8.8 NO Hex Nut,G8,M24 NO Hex Nut,G8,M20 NO Self Locking Nut M20Grade8.8 NO Hex Nut,G10.9,M6 NO Hex Nut,G10.9,M8 NO Hex Nut,G10.9,M16 NO Hex Nut,G10.9,M20 NO Hex Nut,G8,M8 NO Hex Nut,G10.9,M10 NO Hex Nut,G8,M5/8" NO Hex Nut,G8,M1/2" NO Hex Nut,G10.9,M12 NO Hex Nut,G8,M4 NO Hex Nut,G8,M18 NO Hex Nut,G8,M3/8" NO Hex Nut,G8,M1" NO GI MS HEX HEAD NUT M-12 NO "GI NUT 3/8""" NO Page 7 of 17

8 "SLIDING NUT 1 1/2""" NO Hex Nut,G12.9,M12 NO Hex Nut,G8,M10 NO Hex Nut,G8,M16 NO Hex Nut,G8,M20 NO Hex Nut,G8,M24 NO Brass Nut FOR 6 mm thread dia stud NO Hex Fine-T Nut,G10,M12 NO Hex Nut,G12.9,M16 NO Hex Nut,G12.9,M30 NO Hex Nut,G12,M6 NO Hex Nut,G8,M6 NO Hex Nut,G12.9,M8 NO Hex Nut,G8,M3/4" NO Hex Nut,G8,M5/16" NO Hex Nut,G8,M7/8" NO Hex Nut,G10.9,M14 NO Hex Nut,G12.9,M16 NO Hex Nut,G12.9,M20 NO Hex Nut,G10.9,M5 NO Hex Nut,G10.9,M5 NO Hex Nut,G10.9,M12 NO Hex Nut,G10.9,M1 1/8" NO Hex Nut,G12.9,M12 NO Hex Nut,G8,M12 NO Self Locking Nut M16Grade8.8 NO Hex Check Nut,G12.9,M30 NO Nut(Lead Coated Brass): ID-05mm, OD-10mm NO Self locking nut M grade NO SS Nut M12 NO SS Nut M22 NO SS Nut 1/2" 8.8 grade NO "MS Check nut NO Lock nut for M12x60 (10.9G) NO Lock nut for M16x120 (10.9G) NO Hex. Nut M12 SS-304 NO Hex Full-T Bolt & NutG10.9M4x10 NO Hex Full-T Bolt & NutG10.9M4x16 NO Hex Full-T Bolt & NutG10.9M4x20 NO Hex Full-T Bolt & NutG10.9M4x25 NO Hex Full-T Bolt & NutG10.9M6x10 NO Hex Full-T Bolt & NutG10.9M6x16 NO Hex Full-T Bolt & NutG10.9M6x25 NO Hex Full-T Bolt & NutG10.9M8x12 NO Hex Full-T Bolt & NutG10.9M8x16 NO Hex Full-T Bolt & NutG10.9M8x20 NO Hex Full-T Bolt & NutG10.9M8x25 NO Hex Full-T Bolt & NutG10.9M8x50 NO Hex Full-T Bolt & NutG10.9M10x16 NO Hex Full-T Bolt & NutG10.9M10x20 NO Hex Full-T Bolt & NutG10.9M10x25 NO Hex Full-T BoltG10.9M10x40 NO Hex Full-T Bolt & NutG10.9M10x75 NO Hex Full-T Bolt & Nut,G10.9,M12x20 NO Hex Full-T Bolt & Nut,G10.9,M12x25 NO Hex Full-T Bolt & NutG10.9M12x30 NO Hex Full-T Bolt & Nut,G10.9,M12x75 NO Hex Full-T Bolt & Nut,G10.9,M12x100 NO Hex Full-T Bolt & Nut,G10.9,M14x25 NO Hex Full-T Bolt & Nut,G10.9,M14x40 NO Hex Full-T Bolt & Nut,G10.9,M14x50 NO Page 8 of 17

9 Hex Full-T Bolt & Nut,G10.9,M14x100 NO Hex Full-T Bolt & NutG10.9M16x40 NO Hex Full-T Bolt & NutG10.9M16x75 NO Hex Full-T Bolt & Nut,G10.9,M16x100 NO Hex Full-T Bolt & Nut,G10.9,M16x120 NO Hex Full-T Bolt & Nut,G10.9,M16x150 NO Hex Full-T Bolt & Nut,G10.9,M16x180 NO Hex Full-T Bolt & Nut,G10.9,M20x50 NO Hex Full-T Bolt & Nut,G10.9,M20x70 NO Hex Full-T Bolt & Nut,G10.9,M20x100 NO Hex Full-T Bolt & Nut,G10.9,M20x120 NO Hex Full-T Bolt & Nut,G10.9,M20x150 NO Hex Full-T Bolt & Nut,G10.9,M20x180 NO Hex Full-T Bolt & Nut,G10.9,M20x200 NO Hex Full-T Bolt & NutG10.9M24x50 NO Hex Full-T Bolt & NutG10.9M24x60 NO Hex Full-T Bolt & NutG10.9M24x80 NO Hex Full-T Bolt & NutG10.9M24x100 NO Hex Full-T Bolt & NutG10.9M24x120 NO Hex Full-T Bolt & NutG10.9M24x140 NO Hex Full-T Bolt & NutG10.9M24x160 NO Hex Full-T Bolt & NutG10.9M24x180 NO Hex Full-T Bolt & NutG10.9M24x200 NO Hex Full-T Bolt & NutG10.9M27x70 NO Hex Full-T Bolt & NutG10.9M27x100 NO Hex Full-T Bolt & NutG10.9M27x130 NO Hex Full-T Bolt & NutG10.9M27x150 NO Hex Full-T Bolt & NutG10.9M27x180 NO Hex Full-T Bolt & NutG10.9M27x200 NO Hex Full-T Bolt & NutG10.9M27x240 NO Hex Full-T Bolt & NutG10.9M30x80 NO Hex Full-T Bolt & NutG10.9M30x100 NO Hex Full-T Bolt & NutG10.9M30x150 NO Hex Full-T Bolt & NutG10.9M30x180 NO Hex Full-T Bolt & NutG10.9M30x200 NO Hex Full-T Bolt & NutG10.9M30x240 NO Hex Full-T Bolt & NutG10.9M36x80 NO Hex Full-T Bolt & NutG10.9M36x120 NO Hex Full-T Bolt & NutG10.9M36x160 NO Hex Full-T Bolt & NutG10.9M36x200 NO Hex Full-T Bolt & NutG10.9M42x90 NO Hex Full-T Bolt & NutG10.9M42x120 NO Hex Full-T Bolt & NutG10.9M42x200 NO Hex Full-T Bolt & NutG10.9M42x150 NO Hex Full-T Bolt & NutG10.9M42x240 NO Hex Full-T Bolt & Nut,G10.9,M20x220 NO Hex Full-T Bolt,Nut,ChromiumG8.8M10x80 SET Hex Full-T Bolt,Nut,ChromiumG8.8M12x100 SET Hex Full-T Bolt & Nut,G10.9,M24x100 SET Hex Full-T Bolt & Nut,G10.9,M10x50 SET Hex Full-T Bolt & Nut,G10.9,M12x40 SET Hex Full-T Bolt & Nut,G10.9,M12x50 SET Hex Full-T Bolt & Nut,G10.9,M30x120 NO Hex Full-T Bolt,Nut,WasherG8.8M10x120 KG Hex Full-T Bolt,Nut,WasherG8.8M10x100 KG Hex Full-T Bolt & NutG10.9M8x45 NO Hex Full-T Bolt & NutG10.9M12x40 NO Hex Full-T Bolt & NutG10.9M20x70 NO Hex Full-T Bolt & Nut,G10.9,M20x200 SET Hex Full-T Bolt & NutG10.9M10x50 NO Hex Full-T Bolt,G4.6,M6x20 NO Page 9 of 17

10 Hex Full-T Bolt & Nut,G8.8,M16x80 SET Hex Full-T Bolt & Nut,G4.6,M10x40 SET Hex Full-T Bolt & Nut,G6.9,M18x75 SET Hex Full-T Bolt & NutG10.9M12x120 SET Hex Full-T Bolt & Nut,G10.9,M16x120 SET Hex Full-T Bolt & NutG10.9M12x80 SET Hex Full-T Bolt & NutG10.9M12x100 SET Hex Full-T Bolt & NutG10.9M10x120 SET Hex Full-T Bolt & NutG10.9M6x50 SET Hex Full-T Bolt & NutG10.9M20x70 SET Hex Full-T Bolt,Nut,WasherG8.8M 5/8"x2-1 SET Hex Full-T Bolt,Nut,WasherG8.8M 3/4"x2-1 SET Hex Full-T Bolt & NutG10.9M6x150 NO Hex Full-T Bolt & Nut,G10.9,M8x30 NO NUT & BOLT M20X75 NO Hex Full-T Bolt,Nut,WasherG8.8M 1"x4" SET Hex Full-T Bolt,Nut,WasherG8.8M 1/2"x2" SET Hex Full-T Bolt,Nut,WasherG8.8M5/16"x2" SET Hex Full-T Bolt & Nut,G10.9,M20x80 SET Hex Full-T & Nut,G10.9,M10x120 SET Hex Full-T Bolt & Nut,G8.8,M8x35 SET Hex Full-T Bolt & Nut,G8.8,M10x40 SET Hex Full-T Bolt & Nut,G8.8,M10x75 SET Hex Full-T Bolt & Nut,G8.8,M10x50 SET Hex Full-T Bolt & Nut,G10.9,M6x50 SET Hex Full-T Bolt & Nut,G4.6,M6x40 KG Hex Full-T Bolt & Nut,G4.6,M6x50 NO Hex Full-T Bolt & Nut,G4.6,M8x50 KG Hex Full-T Bolt & Nut,G4.6,M10x50 KG Hex Full-T Bolt & Nut,G4.6,M12x25 KG Hex Full-T Bolt & Nut,G4.6,M12x60 KG Hex Full-T Bolt & Nut,G4.6,M16x30 KG Hex Full-T Bolt & Nut,G4.6,M20x50 KG Hex Full-T Bolt & Nut,G4.6,M24x65 KG Hex Full-T Bolt & Nut,G4.6,M20x100 KG Hex Full-T Bolt & Nut,G4.6,M22x100 KG Hex Full-T Bolt & Nut,G4.6,M24x150 KG Hex Full-T Bolt & Nut,G4.6,M30x150 KG Hex Full-T Bolt & Nut,G10.9,M6x30 SET Hex Full-T Bolt & Nut,G8.8,M4x70 NO Hex Full-T Bolt & Nut,G8.8,M4x30 NO Hex Full-T Bolt & Nut,G8.8,M4x100 NO STUD BOLT END THREAD M20X80 SET Hex Full-T Bolt & Nut,G8.8,M16x100 NO BRASS NUT & BOLT SIZE M8X65 LONG SET Hex Full-T Bolt,Nut,WasherG10.9M10x100 NO Hex Full-T Bolt,Nut,WasherG10.9M10x150 NO Hex Full-T Bolt,Nut,WasherG4.6M20x110 KG Hex Coupling Bolt & Nut,G8.8,M16x250 NO Hex Full-T Bolt & Nut,G4.6,M16x125 KG Hex Full-T Bolt,Nut,WasherG4.6M12x KG Hex Full-T Bolt,GI,M10x50 NO Hex Full-T Bolt & Nut,G4.6,M20x120 NO Hex Full-T Bolt & Nut,G4.6,M20x50 NO Hex Full-T Bolt & NutG10.9M16x70 NO Hex Full-T Bolt & NutG10.9M6x26 NO Hex Full-T Bolt,Nut,Washer,G10.9,M20x160 NO Hex Full-T Bolt,Nut,Washer,G10.9,M30x160 NO Hex Full-T Bolt,Nut,Washer,G8.8,M12x45 NO Hex Full-T Bolt & Nut,G10.9,M24x75 NO Hex Full-T Bolt & Nut,G10.9,M24x105 NO Page 10 of 17

11 Hex Full-T Bolt & Nut,G10.9,M30x60 NO Hex Full-T Bolt & Nut,G10.9,M30x70 NO Hex Full-T Bolt & Nut,G10.9,M30x90 NO Hex Full-T Bolt & Nut,G10.9,M36x105 NO Hex Full-T Bolt,Nut,Washer,G10.9,M30x180 NO Hex Full-T Bolt,GI,M24x120 NO Hex Full-T Bolt,G10.9,M5x30 NO Hex Full-T Bolt & Nut,G10.9,M8x40 NO Hex Full-T Bolt & Nut,G10.9,M8x60 NO Hex Full-T Bolt,Nut,Washer,G10.9,M12x70 NO Hex Full-T Bolt,Nut,Washer,G10.9,M12x80 NO Hex Full-T Bolt,Nut,Washer,G10.9,M36x400 NO Hex Full-T Bolt,Nut,Washer,G4.6,M8x40 NO Hex Full-T Bolt & Nut,G4.6,M16x60 NO Hex Full-T Bolt,Nut,Washer,G4.6,M16x75 NO Hex Full-T Bolt,Nut,Washer,G4.6,M16x100 NO Hex Full-T Bolt,Nut,Washer,G4.6,M20x80 NO HexheadBolt&Nut with washer,g4.6,m16x250 SET SS Bolt& Nut M16x80 F.T NO SS Bolt & Nut M22x160H.T NO SS Bolt & Nut M32x140H.T NO SS Bolt & nut M12x80 NO SS Bolt & nut M12x120 NO SS Bolt & nut M16x110 NO SS Bolt & nut M16x85 NO SS Bolt & nut M16x60 NO SS Bolt & nut M12x60 NO GI nuts&bolt1/2"x3" NO Hex Full-T Bolt & Nut,G10.9,M14x70 NO Hex Full-T Bolt,Nut,Washer,G4.6,M12x40 NO Hex Full-T Bolt,Nut,Washer,G4.6,M12x60 SET Hex Full-T Bolt & Nut,G8.8,M16x50 SET Hex Full-T Bolt & Nut,G10.9,M16x60 SET Hex Full-T Bolt & Nut,G8.8,M16x80 SET COUNTER SHUNK BOLT M12x40, GRADE 12.9 NO Hex Full-T Bolt & Nut,G4.6,M12x70 SET Hex Full-T Bolt & NutG10.9M18x70 SET Hex Full-T Bolt,G10.9,M16x40 NO Hex Full-T Bolt,Nut,WasherG10.9M12x75 SET Hex Full-T Bolt,G10.9,M16x60 NO Hex Full-T Bolt,Nut,Washer,G4.6,M20x180 NO Hex Full-T Bolt,Nut,Washer,G4.6,M20x120 NO Hex Full-T Bolt,Nut,Washer,G4.6,M16x40 NO Hex Full-T Bolt & Nut,G4.6,M16x50 NO Hex Full-T Bolt,Nut,Washer,G4.6,M8x40 NO Hex Full-T Bolt,Nut,Washer,G4.6,M24x60 NO Hex Full-T Bolt,Nut,Washer,G4.6,M36x120 NO Hex Full-T Bolt,Nut,WasherG10.9M10x35 SET Hex Full-T Bolt,Nut,Washer,G4.6,M8x15 SET Hex Full-T Bolt,Nut,Washer,G4.6,M8x20 SET Hex Full-T Bolt,Nut,WasherG10.9M12x55 SET Hex Full-T Bolt,Nut,WasherG10.9M08x40 SET Hex Full-T Bolt,Nut,WasherG10.9M20x80 SET Hex Full-T Bolt,Nut,WasherG10.9M16x70 NO Hex Full-T Bolt & Nut,G8.8,M18x70 NO Hex Full-T Bolt & NutG10.9M8x30 SET Hex Full-T Bolt,Nut,WasherG10.9M10x35 SET Hex Full-T Bolt & NutG10.9M10x120 SET Hex Full-T Bolt,Nut,Washer,G4.6,M8x30 SET Hex Full-T Bolt & Nut,G4.6,M16x60 SET Hex Full-T Bolt,Nut,Washer,G4.6,M20x60 SET Page 11 of 17

12 Hex Full-T Bolt,Nut,Washer,G4.6,M12x40 SET Hex Full-T Bolt,Nut,Washer,G4.6,M12x60 SET Hex Full-T Bolt,Nut,Washer,G4.6,M10x40 SET Hex Full-T Bolt & Nut,G10.9,M12x35 SET Hex Full-T Bolt & Nut,G10.9,M20x250 NO Hex Full-T Bolt,Nut,Wash,G10.9,11/8"x10m SET Hex Full-T Bolt,Nut,Washer,G10.9,M36x75 SET Hex Full-T Bolt & Nut,G10.9,M8x60 NO Hex Full-T Bolt & Nut,G10.9,M12x60 NO Hex Full-T Bolt & Nut,G10.9,M10x80 NO Hex Full-T Bolt,Nut,WasherG10.9M12x120 NO Hex Full-T Bolt,Nut,WasherG10.9M16x80 NO Hex Full-T Bolt,Nut,Washer,G4.6,M14x110 SET Hex Full-T Bolt,Nut,Washer,G4.6,M14x80 SET Hex Full-T Bolt,Nut,Washer,G8.8,M10x20 SET Hex Full-T Bolt,Nut,Washer,G10.9,M16x35 SET Hex Full-T Bolt,Nut,Washer,G10.9,M12x30 SET Hex Full-T Bolt,G10.9,M24x180 LOT Hex Full-T Bolt,G10.9,M36x110 SET Hex Full-T Bolt,GI,M8x20 NO Bolt M6X65 lg.with Nut & spring washer 8.8 GRADE NO Bolt M6X85 lg.with Nut & spring washer8.8 GRADE NO Bolt M6X75 lg.with Nut & spring washer8.8 GRADE NO Hex Full-T Bolt,Nut,Washer,G10.9,M8x90 NO Hex Full-T Bolt,Nut,Washer,G10.9,M20x30 NO Hex Full-T Bolt,Nut,Washer,G10.9,M5x10 NO Hex Full-T Bolt,Nut,Washer,G10.9,M10x90 NO Hex Full-T Bolt,Nut,Washer,G10.9,M10x100 NO Hex Full-T Bolt,Nut,Washer,G10.9,M16x90 NO Hex Full-T Bolt,Nut,Washer,G10.9,M16x110 NO Hex Full-T Bolt,Nut,Washer,G10.9,M20x45 NO Hex Full-T Bolt,Nut,Washer,G10.9,M30x160 NO Hex Full-T Bolt,Nut,Washer,G10.9,M36x105 NO Hex Full-T Bolt,Nut,Washer,G10.9,M36x180 NO Hex Full-T Bolt,Nut,Washer,G8.8,M12x45 NO Hex Bolt,G10.9,M6x15 NO Hex Bolt & Nut,G10.9,M6x15 NO Hex Bolt,Nut,Washer,G10.9,M6x10 NO Hex Bolt,Nut,Washer,G10.9,M6x20 NO Hex Bolt,Nut,Washer,G10.9,M6x25 NO Hex Bolt,Nut,Washer,G10.9,M8x10 NO Hex Bolt,Nut,Washer,G10.9,M8x15 NO Hex Bolt,Nut,Washer,G10.9,M8x20 NO Hex Bolt,Nut,Washer,G4.6,M8x25 NO Hex Bolt,Nut,Washer,G4.6,M12x30 NO Hex Bolt,Nut,Washer,G4.6,M20x200 NO Hex Full-T Bolt,G10.9,M16x10 SET Hex Full-T Bolt,G10.9,M6x20 SET Hex Full-T Bolt,G10.9,M6x25 SET Hex Full-T Bolt & Nut,G10.9,M24x90 SET SOCKET HEAD CAP SCREW F.T M3X5; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M3X10; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M3X16; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M3X20; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M3X25; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M4X6; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M4X10; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M4X16; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M4X20; 12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M4X25; 12.9 GRADE NO SOCKET HEAD CAP SCREW M5X10; 12.9 GRADE NO Page 12 of 17

13 SOCKET HEAD CAP SCREW F.T M5X16;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M5X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M5X25;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M5X30;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M6X8;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M6X12;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M6X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M6X25;12.9 GRADE NO SOCKET HEAD CAP SCREW F.TM6X30;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M6X40;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M8X12;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M8X16;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M8X20;12.9 GRADE NO Socket Head Cap Screw F.T. M8x25Gr;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M8X40;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M8X60;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X12;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X16;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X25;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X40;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X60;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M10X80;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M12X16;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M12X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M12X30;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M12X40;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M14X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M14X30;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M14X50;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M16X20;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M16X30;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M16X50;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M18X50;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M20X25;12.9 GRADE NO SOCKET HEAD CAP SCREW F.TM20X40;12.9 GRADE NO SOCKET HEAD CAP SCREW F.TM20X60;12.9 GRADE NO SOCKET HEAD CAP SCREW F.TM14X70;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M16X70;12.9 GRADE NO Socket Head cap. Screw 16x90 F.T.Grade10 NO SOCKET HEAD CAP SCREW F.T M16X100;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M18X70;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M18X100;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M20X80;12.9 GRADE NO SOCKET HEAD CAP SCREW F.T M20X100;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M6X16;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREWM6X10;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M6X25;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M8X12;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M8X20;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M8X30;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M10X16;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M10X25;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M10X30;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M12X25;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M16X30;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M16X40;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M16X50;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M12X135;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M12X130;12.9 GRADE NO SOCKET COUNTER SUNK HEAD SCREW M12X120;12.9 GRADE NO Page 13 of 17

14 SOCKET COUNTER SUNK HEAD SCREWM12X110;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINTM 3X5;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M3X10;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M3X16;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M4X5;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M4X10;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M4X16;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M4X20;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M5X5;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M5X10;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M5X16;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M5X20;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M6X6;12.9 GRADE NO M6x12 BSP GRUB ScrewGrade8.8 NO SOCKET SET SCREW KNURLED CUP JOINT M6X20;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M6X25;12.9 GRADE NO socket set knulad cup joint m8x10 NO SOCKET SET SCREW KNURLED CUP JOINT M8X16;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINT M8X25;12.9 GRADE NO socket set knulad cup joint m8x30 NO SOCKETSETSCREW KNURLED CUP JOINT M10X10;12.9 GRADE NO SOCKET SET SCREW KNURLED CUPJOINTM10X16;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINTM10X25;12.9 GRADE NO SOCKET SET SCREW KNURLED CUP JOINTM10X30;12.9 GRADE NO SOCKET SET SCREWKNURLED CUP JOINT M10X40;12.9 GRADE NO SOCKETSETSCREW KNURLED CUP JOINTM12X12;12.9 GRADE NO M12x16 BSP GRUB ScrewGrade8.8 NO SOCKET SET SCREW KNURLED CUPJOINT M12X20;12.9 GRADE NO SOCKET SET SCREWKNURLED CUP JOINT M12X25;12.9 GRADE NO SOCKET SET SCREW KNURLEDCUPJOINT M12X40;12.9 GRADE NO Socket head cap screw,g10.9,m12x50 NO SOCKETCOUNTERSUNK HEAD BOLTM12X50 GR12.9 NO UNBRACO MAKE SOCKET HEAD CAP SCREW M16X6 NO SOCKET HEAD CAP SCREW M8X25 GRADE 12.9 NO Socket Head cap. Screw M20x70 F.T.Grade1 NO BSP CYLINDERICAL SCREW GR 12.9 M12X66M NO M12x16 BSP Cylindrical ScrewGrade8.8 NO M6x20 BSP Cyl. ScrewGrade8.8 NO BSP HEX SCREW GRADE 8.8 M6X16MM NO M4x8 BSP GRUB ScrewGrade8.8 NO M6x80 BSP Cyl. ScrewGrade8.8 NO COUNTER SHUNK SCREW M12X60 NO Brass screw head, 6X 25 mm length. NO Brass screw head, 6 X 20 mm length. NO Socket Head cap. Screw F.T.M16x90Grade12 NO SHeadsetScrewKunurledcapJointM6x12Gr12.9 NO SSetScrewKunurledcapJointM12x16Grade12.9 NO Socket Head Cap ScrewM8x45Grade NO CSK head screw bolt M24x gr. NO HEX Screw M18x75 (BSP) 8.8 Gr. NO CSK bolt M16x100, 10.9 gr. NO SHCS M20x35 (F.T) 10.9 Gr. NO SHCS M20x45 (F.T) 10.9 Gr. NO SHCS M20x140 (F.T) 10.9 Gr. NO SHCS M36x60 (F.T) 10.9 Gr. NO Grub Screw M6x Gr. NO Grub Screw M6x Gr. NO Grub Screw M10x Gr. NO Grub Screw M12x Gr. NO S S GRUB SCREW SIZE M6X15 NO SS COUNTER SUNK SCREW SIZE M6X20 NO Page 14 of 17

15 Socket head bolt,5/16",24g,ht,l= 45mm NO Socket head bolt,3/8",16g,ft,l= 85mm NO CSK cap screw M20x100,10.9gr. NO Socket Head Cap Screw M12x25 FT 10.9 Gr. NO STUD 10.9 GRADE M20X200 NO STUD 10.9 GRADE M16X130 NO STUD 10.9 GRADE M16X200 NO M25X125 STUD FT BSW 8.8 GRADE NO M16X75 STUD FT BSW 8.8 GRADE NO "M1""X8"" STUD FT 8.8 GRADE" NO "M1""X9"" STUD FT 8.8 GRADE" NO Stud 7/8"x7"Grade8.8 NO Stud 7/8"x6"Grade8.8 NO STUD WITH NUTS BOTH END SIZE 5/8"X11" NO Stud full thread M16x70 F.T.Grade10.9 NO "H T STUD AND NUT GRADE 8.8 SIZE7/8"X7" SET "H T STUD AND NUT GRADE SIZE 7/8"X6" SET "H T STUD AND DOUBLE NUT GRADE 8.8 1""X9 SET "H T STUD AND NUT GRADE 8.8 7/8""X3" SET "H T STUD AND DOUBLE NUT GRADE 8.8 1""X5 SET "H T STUD AND DOUBLE NUT GRADE 8.8 1""X8 NO "H T STUD AND DOUBLE NUT GRADE 7/8""X4"" NO Stud 5/8"x3"Grade8.8 NO "H T STUD AND NUT GRADE 8.8 3/4"X3" NO Stud M 20x90Gr 10.9 thread 40 mm x 30 mm NO Brass Stud 6 X one side 19 /10mm NO Brass Stud 6X 85 thread: L-19R 10 mm. NO Brass Stud 6X95thread, L 19 R10 NO Brass Stud 6X110 L-19 R10 NO Stud 7/8"x3"Grade NO Stud both end thread M16x70 F.T.Grade10.9 NO M12x50(both ends threaded)stud 10.9 gr NO M12x50(both ends threaded)stud 10.9 gr NO SS Stud M12x50 KG SS Stud M22x110 NO Stud M8X30 Both end Threaded;Grade 8.8G NO Stud M12X45 Both end Threaded;Grade 8.8G NO HIGH TEN. STUD DOUBLE NUT WASHER M24X600 NO Stud with Nut size: M12x75, Grade 10.9 NO SS stud & nutsm6x1250mm NO SS stud & nutsm6x1500mm NO SS stud & nutsm10x150mm NO SS Stud & Nuts M 4x1250 mm NO SS stud & nuts M4x1500 mm NO S S STUD WITH DOUBLE NUT M 6X715 mm NO S S STUD WITH DOUBLE NUT M 6X820 mm NO HT Stud with nut 5/8",L-85mm,full thread NO COPPER WASHER 17X7X1.5 MM NO Spring Washer,G4,M4 NO Spring Washer,G4,M6 NO Spring Washer,G4,M8 NO Spring Washer,G10,M10 NO Spring Washer,G10,M12 NO Spring Washer,G4,M14 NO Spring Washer,G10,M16 NO Spring Washer,G4,M20 NO Spring Washer,G10,M24 NO Spring Washer,G4,M27 NO Spring Washer,G10,M30 NO Spring Washer,G4,M36 NO Spring Washer,G4,M42 NO Page 15 of 17

16 Plain Washer,G4,M4 NO Plain Washer,G10,M6 NO Plain Washer,G10,M8 NO Plain Washer,G10,M10 NO Plain Washer,G10,M12 NO Plain Washer,G10,M14 NO Plain Washer,G10,M16 NO Plain Washer,G4,M24 NO Plain Washer,G4,M27 NO Plain Washer,G4,M30 NO Plain Washer,G4,M36 NO Plain Washer,G4,M42 NO Plain Washer,G8.8,M18x50 NO Plain Washer,G4,M22 NO Hex Full-T Bolt,G10.9,M42x180 NO Plain Washer,G4,M6 KG Plain Washer,G4,M16 NO Plain Washer,G4,M22 KG Plain Washer,G4,M24 KG Plain Washer,G10,M20 NO Spring Washer,G4,M32 NO COPPER WASHER 23.5X20.5X1.6 MM NO COPPER WASHER 24X15X1.6 MM NO COPPER WASHER 17MM DIA. NO WASHER D20XD13X1.6 NO LOCK WASHER M-12 NO Brass washer for 6 mm dia stud NO WASHER M-26; GRADE 8 NO Plain Washer,G8,M10 NO Plain Washer,G12,M16 NO Plain Washer,G8,M6 NO Plain Washer,G10,M8 NO Plain Washer,G12,M8 NO Plain Washer,G8,M8 NO Plain Washer,G12,M10 NO Plain Washer,G8,M10 NO Plain Washer,G8,M12 NO Plain Washer,G8,M18 NO Plain Washer,G12,M20 NO Plain Washer,G8,M20 NO Plain Washer,G8,M24 NO Plain Washer,G10,M5 NO Plain Washer,G12,M6 NO Spring Washer,G8,M22 NO Spring Washer,G10,M20 NO WASHER FOR M16Grade8.8 NO Spring Washer,G12,M8 NO WASHER FOR HEX HEAD BOLT M1 1/8" GR 10.9 NO Spring Washer,G4,M18 NO Taper washer M30 NO Tounged lock washer M 10 NO Tounged lock washer M 12 NO Tounged lock washer M 16 NO Tounged lock washer M 20 NO Tounged lock washer M 24 NO Tounged lock washer M 36 NO M32 Spring washer NO DISC SPRING CUP WASHER SIZE-25.0 OD x 12 NO Plain Washer-A-16,IS2063. NO DISC SPRING CUP WASHER SIZE-34.0 OD X 16 NO Plain Washer A-12 IS2083 NO Page 16 of 17

17 M12 SS Plain waher NO Copper Washer 16x7x1.5 mm NO Copper washer 12x8x1.5 NO Copper washer 10x6x1.5 NO Copper washer 28x21x2 NO Copper washer 39x32x2 NO Copper washer 38x30x2 NO Copper washer 14x10x1.5 NO Copper washer 32x27x2 NO Copper washer 55x18x2 NO Copper washer 223x17x2 NO Copper washer 32x26x2 NO COPPER WASHER 14X20X2MM NO Washer(Lead Brass):ID05mm,OD10mm,T02mm NO SELF LOCKING NUT M18 NO Metallic self lock nut M16Grade10.9 NO Hex Nut,G10.9,M24 SET Hex Nut,G10.9,M30 SET S.S SPLIT PIN 2MMX50MM NO SPLIT PIN 2X25 NO SS SPLIT PIN 3X75MM NO SS SPLIT PIN 4X80 NO SS SPLIT PIN 5X75MM NO S.S. SPLIT PIN 2X20 MM NO S.S.SPLIT PIN 3X30 MM NO S.S.SPLIT PIN 3X50 MM NO S.S.SPLIT PIN 4X50 MM NO Split Pin 2 x 40 mm NO Split Pin 2.5 x 40 mm NO Split Pin 3 x 25 mm NO Split Pin 3 x 40 mm NO Split Pin 3 x 60 mm NO Split Pin 4 x 75 mm NO Split Pin dia.10x100 length NO Split Pin dia. 8X75 length NO Split Pin dia. 6X75 length NO Split Pin dia. 6.3X35 length NO Split Pin plain washer 32/50X3 thick NO Split Pin plain washer 42/60X6 thick NO Split Pin dia. 5X35 length NO S S NUT BOLT M24X120 NO HEX FULL THREAD BOLT AND NUT G10.9 GRADE M6 X 50 SET MAKE OF HT FASTNERS: TVS/UNBRAKO/PFL/LPS/GKW SS ITEMS ARE 304 GRADE SR..MANAGER(ELEC) PURCHASE,WAREHOUSE Page 17 of 17