Fixed Coaxial Attenuators

Transcription

1 Fixed Caxial Attenuatrs dc t 52 GHz, up t 1,000 Watts Chice f frequency ranges, attenuatin valure and pwer level. Cnsistent, repeatable perfrmance High reliability Rugged injectin mlded cnnectrs Lw Intermdulatin (LIM) versins available Custm cnnectr ptins General Infrmatin In this sectin f the catalg, each Fixed Caxial Attenuatr is utlined utilizing individual data sheets cntaining prduct features, specificatins, and utline drawings. These data sheets are preceded by a quick reference guide t help yu select the Fixed Caxial Attenuatr(s) that fits yur needs. The page number fr each Fixed CaxialAttenuatr data sheet is given in the quick reference guide. Frm the cmpany s very first DC - 1 GHz tee attenuatr, came the technlgy that enabled the design f the first DC - 5 GHz, the first DC - 10 GHz, and the first DC - 18 GHz caxial attenuatrs. These designs led t the develpment f the distributed resistr card attenuatr element, which is the basis fr mst all attenuatrs manufactured tday frm DC - 60 GHz. Until the riginal patents expired a few years ag, mst majr attenuatr manufacturers in the U.S. were licensed under ne r mre Weinschel Engineering, C., patents. Als MIL-DTL-3933 Qualified - Aerflex / Weinschel is a QPL supplier f Fixed Attenuatrs. Mst Aerflex / Weinschel Fixed Caxial Attenuatrs can be supplied accrding t custmer specified testing, envirnmental r military r gvernment specificatin requirements (page 26). Attenuatr Sets f Aerflex / Weinschel Fixed Attenuatrs are als available...see page 62. Shipment available via r. Check with ur distributr fr current prducts and stcking quantities. 11 Revisin Date: 1/18/10

2 Fixed Caxial Attenuatrs Fixed Attenuatrs...dc-42 GHz, 1-10 Watts Frequency Average Peak Mdel Range Pwer Pwer Nminal Attenuatin Cnnectr Page (GHz) (Watts) (kw) Type N 1 dc , 20, 30, 40, 50, * N 32 2 dc * 1W dc , N 30 3T dc , 20, 30, 40, 50, * SMA 22 4T dc * 3M dc , 20, 30, 40, 50, * SMA 21 4M dc * 4H dc , 12, 15, 20, * SMA dc , 6, 10, 20, 30, 40, 50, * N dc , 6, 10, 20, * N dc in 0.5 db Increments * SMA 23 32J dc in 0.5 db Increments mm dc , 2, 3, 6, 10, 20, * SMA dc , 20, 30, 40, 50, * N 33 54A dc , 6, 10, 20, * 2.92mm dc , 6, 10, 20, * TNC dc , 20, * 3.5mm 27 69A dc , 20, * SMA 34 75A dc , 6, 10, 20, * 2.92mm 35 84A dc , 6, 10, 20, * 2.4mm A dc , 20, * SMA A * VARIES WITH FREQUENCY. Shipment available via r. Nte: Other mdels may als be available frm Express delivery. 12 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

3 Fixed Caxial Attenuatrs Fixed Attenuatrs...dc-40 GHz, Watts Frequency Average Peak Mdel Range Pwer Pwer Nminal Attenuatin Cnnectr Page (GHz) (Watts) (kw) Type N 24 dc , 6, 10, 20, * 2.92mm/N dc , 6, 10, 20, * 2.92mm/N dc , 6, 10, 20, * dc , 6, 10, 20, 30, * 3.5mm/N dc , 6, 10, 20, 30, * 3.5mm/N dc , 10, 20, 30, * 3.5mm/N dc , 20, 30, N dc , 2, 3, 6, 10, 20, 30, N dc , 6, 10, 20, 30, N/2.92mm dc , 6, 10, 20, 30, * N dc , 6, 10, 20, * 3.5mm dc , 6, 10, 20, mm dc , 20, 30 1, * 2.92mm dc , 6, 10, 20, N 46 * VARIES WITH FREQUENCY. Shipment available via r. Nte: Other mdels may als be available frm Express delivery. 13 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

4 Fixed Caxial Attenuatrs Fixed Attenuatrs...dc-18.0 GHz, Watts Frequency Average Peak Mdel Range Pwer Pwer Nminal Attenuatin Cnnectr Page (GHz) (Watts) (kw) Type N. 40 dc , 6, 10, 20, 30, N dc , 10, 20, 30, N 45 dc , 6, 10, 20, 30, N dc , 10, 20, 30, * 49 dc , 6, 10, 20, 30, * N dc , 6, 10, 20, 30, N dc , 6, 10, 20, N dc , 20, 30, N dc , 20, * N dc , 20, 30, * N 60 NEW 82 dc-3.0 1, , 20, 30, * N 61 * VARIES WITH FREQUENCY. Shipment available via r. Nte: Other mdels may als be available frm Express delivery. 14 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

5 Fixed Caxial Attenuatrs Lw IM Fixed Attenuatrs...dc-18.0 GHz, Watts Frequency Average Peak Mdel Range Pwer Pwer Nminal Attenuatin Cnnectr Page (GHz) (Watts) (kw) Type N. 24-XX-XX-LIM dc , 20, * 2.92mm/N XX-XX-LIM dc , 20, 30, * 2.92mm/N XX-XX-LIM dc , 20, 30, * 3.5mm/N XX-XX-LIM dc , 20, 30, * 3.5mm/N XX-XX-LIM dc , 20, 30, * 3.5mm/N XX-XX-LIM dc , 20, 30, N XX-XX-LIM dc , 20, 30, * N XX-XX-LIM dc , 20, 30, * N XX-XX-LIM dc , 20, 30, N 59 * VARIES WITH FREQUENCY. web: weinschel-sales@aerflex.cm Revisin Date: 7/13/10 15

6 Fixed Caxial Attenuatrs Frequently Asked Questins abut Fixed Caxial Attenuatrs What are the advantages f Weinschel's fixed attenuatrs? Aerflex / Weinschel lw pwer fixed attenuatrs feature a cmbinatin f advantages ver ther designs:* 1. Mst Aerflex / Weinschel attenuatrs feature injectin mlded dielectric fr better center pin captivatin and alignment. Injectin mlded dielectric als eliminates the need fr the epxy hle "stake" as seen in ther designs. This epxy hle in ther designs is subject t RF leakage and mvement when expsed t envirnmental extremes and prlnged use. 2. Aerflex / Weinschel fixed attenuatrs have a prprietary resistr element, fired at 950 C fr superir lng term stability ver temperature, pwer and time. The attenuatr element is trimmed fr precise custm attenuatin values. 3. Aerflex / Weinschel fixed attenuatrs have n slder cntacts. They feature spring laded plunger cntacts t the resistr cards that prvide expansin tlerance ver wide temperature and pwer ranges. 4. Aerflex / Weinschel fixed attenuatrs are made with high quality materials and machined t very clse tlerances. The result is a design that stands up t severe envirnmental and multiple matings. 5. High pwer designs feature special high temperature dielectric supprt beads. Des Aerflex / Weinschel ffer high reliability fixed attenuatrs? Yes. Aerflex / Weinschel is a majr QPL supplier f MIL-DTL-3933, CLASS III/IV, N/S Fixed Attenuatrs. Mst Weinschel Fixed Caxial Attenuatrs can be supplied accrding t custmer specified testing, envirnmental r military r gvernment specificatin requirements. Hi-Rel units can be laser-marked and are manufactured frm materials which have a TML f less than 1% and CVCM less than 0.1%. Refer t page 25 fr mre details. What is a bidirectinal and unidirectinal attenuatr? All Aerflex / Weinschel attenuatrs are bidirectinal unless they are specified as unidirectinal in the pwer rating specificatin. Bidirectinal means the maximum specified pwer can be applied t either the input r utput f the attenuatr. Unidirectinal means the maximum specified pwer can nly be applied t the input prt f the attenuatr. Unidirectinal designs allw fr smaller verall package sizes and reduced csts. All ur attenuatrs have maximum average and peak pulse input pwer limits. The average pwer limit decreases linearly as the ambient temperature increases. If these limits are exceeded, burnut f the attenuatr element results r its calibratin may be permanently changed. When used within its specificatins, an attenuatr is an indispensable cmpnent in measurement and system applicatins. *Mst designs, sme features may nt apply t certain lw cst attenuatr designs. What db values are available besides thse in the catalg? Mst any db value is available; hwever yu shuld cnsult yur lcal sales representative r the factry fr design availability fr a particular db value fr the selected mdel. There is generally an additinal charge fr nn-catalg values. Can Aerflex / Weinschel prvide attenuatrs fr space applicatins? Yes. Aerflex / Weinschel fixed attenuatrs are being used n a wide variety f military and cmmercial cmmunicatin satellites. "S" level fixed attenuatrs can be prvided fr any db value up t 40 db frm dc t 40 GHz. Aerflex / Weinschel has recently intrduced Mdels 32 (page 24) and 32J (page 23) standard fixed attenuatrs that perates frm dc t 18 r 32 GHz. These attenuatrs ffer superir electrical and mechanical design that is ideally suited fr space applicatins. Aerflex / Weinschel s use f precisin cnnectrs, injectin mlded captivatin f cnnectr cntacts (n slder r cntact fingers) and very precise and stable resistrs result in a superir electrical and mechanical design that is ideally suited fr space applicatins. Aerflex / Weinschel prgram experience includes: Aussat (Optus) SSTI JCSAT KOREASAT GlbalStar GEM TDRSS ICO SMTS TELSTAR INTELSAT AGILA GOES ACeS MSAT MILSTAR EOS TOMS...and many thers. Aerflex / Weinschel ffers extensive testing prgrams fr space qualified attenuatrs and ther cmpnents that can include: Randm Vibratin: Randm and/r Sine Vibratin up t 100 g rms. Mnitred Thermal Cycle: Units mnitred fr pen cnditin ver -55 t +85 C temperature range. Thermal Shck: Perfrmed per MIL-STD-202, Methd 107. Burn-In Testing: Perfrmed at rated pwer and perating temperature frm 96 t 360 hurs typical. Mechanical Shck: Perfrmed per MIL-STD-202, Methd 213 Test Cnditin F up t 1000 G peak. Misture Resistance Testing: Perfrmed per MIL-STD- 202, Methd 106. (except sub-cycle 7b is nt applicable) with cnnectrs capped. Salt Spray: Perfrmed per MIL-STD-202, Methd 101 with cnnectrs capped. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

7 Fixed Caxial Attenuatrs Can Weinschel prvide special fixed attenuatrs? Yes. Aerflex / Weinschel has prduced ver 2000 custm fixed attenuatr designs. Specials cntinue t be a significant part f Weinschel's prduct ffering. Special features may include: 1. Custm Cnnectr Cnfiguratins 2. Matched Pairs r Sets 3. Lwer V & Higher Accuracy 4. Special Munting & Envirnmental Cnditins 5. Unique Test Requirements & Data Des Weinschel ffer any attenuatrs with IM3 specified? Yes Aerflex / Weinschel has recently intrduced new as well as updated mdels specifically fr applicatins requiring lw intermdulatin distrtin. Mdels are available with the lw IM ptins are...24, 33, 40, 45, 46, 47, 48, 48, 53, 57, & 58. Refer t the page 17 fr a prduct line verview r the specific data sheet fr IM3 details. Hw is the temperature r pwer cefficient specificatin applied? These specificatins tell hw much the attenuatin will change when the ambient temperature r input pwer changes. First multiply the catalg temperature cefficient r pwer cefficient by the ambient temperature range r input pwer range t which the attenuatr will be expsed. Then multiply that number by the db value f the attenuatr. The result is the maximum change in attenuatin than can be expected ver the ambient temperature range r pwer range that was specified. Hw is the attenuatr pwer rating calculated? An attenuatr will handle specified pwer at ambient temperatures as specified in the catalg. N special fan cling is required. At higher temperatures the pwer rating is calculated by using catalg specificatins and a straight line graph (Example shwn abve). Fr instance the pwer rating f the Mdel 48 attenuatr is 100 watts t 25 C and 10 watts at 125 C. Using linear graph paper, plt a straight line between these tw pints. This plt shws that the pwer rating at 75 C is apprximately 56 Watts. 30 db attenuatin values. Each attenuatr is tested in 1 GHz intervals t minimize interplatin errr. The attenuatr sets are available in stainless steel type N (Mdel 1 & 44), and 3.5mm (Mdel 56) cnnectrs. Custm sets with ther cnnectr type and higher pwer sets are als available upn request. Refer t page 60 fr mre details. What is Third-Order Intermdulatin Distrtin? (IM3) Intermdulatin distrtin (IM) cnsists f the spurius signals which result frm the mixing f nth rder frequencies in the nn-linear elements f a cmpnent. Third rder intermdulatin distrtin is f particular interest because third rder prducts typically represent the highest level distrtin appearing clse t the desired signal, and as such the highest level nn-filterable distrtin. Third rder IM level (IM3) is tested by injecting tw pure tnes f equal magnitude (f1 and f2) int the cmpnent t be tested. The third rder IM prducts will appear in the utput spectrum at the frequencies 2f1-f2 and 2f2-f1. These prducts are characterized by defining their level (in dbc) relative t the fundamental utput tnes at either f1 r f2. Applicatins... Aerflex / Weinschel Attenuatrs are used in a wide variety f applicatins in the electrnic field fr the cntrl r measurement f radi frequency energy. Attenuatrs are used as accurate standards in the measurement f lss r gain by the RF substitutin methd. They are used as a means f extending the dynamic range f measuring equipment such as pwer meters, field intensity meters, spectrum analyzers, and amplifiers, r t prevent verlading f receivers and amplifiers. They als reduce, by masking, the effects f variable r mismatched impedances n such circuit elements as scillatr, T-junctins, mixers, etc. Fixed Attenuatrs can satisfy almst any requirement invlving a reductin in pwer. Attenuatrs designed and manufactured by Weinschel Crpratin are very stable and remain precisin calibrated ver wide ranges f humidity, temperature, and ther ambient cnditins fr lng perids f time. Des Aerflex / Weinschel ffer attenuatrs sets r attenuatin test kits? Aerflex / Weinschel ffers a variety f attenuatin standard sets cnsisting f precisin designed fixed attenuatrs. These sets are ideally suited fr standards and research labratries as well as prductin, quality cntrl, and inspectin departments. Aerflex / Weinschel attenuatin sets are available in either 3, 6, 10, 20 db r 1, 3, 6, 10, 20, web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 17

8 Fixed Caxial Attenuatrs Fixed Attenuatrs... 1,000W 82 (Type N) 800W Specials 500W 350W 250W 200W 150W 100W 53 (Type N) 45 (Type N) 58 (Type N) 40 (Type N) 65 (Type N) 57 (Type N) 59 (Type N) 68 (Type N) 81 (Type N) 67 (Type N) Specials 49 (Type N) 73 (Type N) Specials 66 (Type N) 48 (Type N /3.5mm) 72 (Type N / 2.92mm) 24 (Type N / 2.92mm) Pwer Handling 50W 25W 20W 34 (Type N) 33 (Type N / 2.92mm) 47 (Type N / 3.5mm) & 90 (Type N) 86 (3.5mm) 46 (Type N / 3.5mm) 74 (3.5mm) 89 (2.92mm) 10W 37 (Type N) 23 (Type N) 41 (SMA) Specials 5W 1 (Type N) 2 (Type N) 44 (Type N) 55 (TNC) 69A (SMA) Specials 75A (2.92mm) 2W 2W 1W (Type N) 3T (SMA) 3M (SMA) 32 (SMA, Hi-Rel) 3330A / 3331A (SMA Hex/ Rund) 4H (SMA - Hex) 4T (SMA) 4M (SMA) 56 (3.5mm) 32J & 87 (2.92mm) 54A (2.92mm) & 84 (2.4mm) 2 GHz 4 GHz 8 GHz 12.4 GHz 18 GHz 26.5 GHz 40 GHz Frequency Attenuatin Selectin Guide: Pwer Handling / Frequency / Cnnectr Type 18 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

9 Fixed Caxial Attenuatrs Mdels 3330A & 3331A General Purpse Attenuatrs Lw Cst Subminiature Lw Cst - These general purpse attenuatrs ffer subminiature size, bradband frequency respnse, and attenuatin values frm 1 t 30 db at lw, cmpetitive prices. Tw Cnfiguratins - Rund bdy Mdel 3330A and a hex bdy Mdel 3331A. Ideal fr Bulk Quantity Requirements. Specificatins FREQUENCY RANGE: dc t 18.0 GHz dc t 18.0 GHz 2 Watts CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 5.6 g (0.2 z) maximum (Bth Mdels) Mdel 3330A (Rund): Mdel 3331A (Hex): RHS Nminal ATTN (db) Deviatin (db) , dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t C. 250 watts peak (5 μsec pulse width; 0.4% duty cycle). TEMPERATURE RANGE: -55 C t +125 C. db VALUE DIM A ( ) 20, ( ) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. 3330A - XX Mdel Attenuatin web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 19

10 Fixed Caxial Attenuatrs Mdel 4H Hex Bdy Attenuatr Precisin SMA Cnnectrs dc t 18.6 GHz 2 Watts RHS CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 5.0 g (0.18 z) maximum Subminiature - These attenuatrs ffer the smallest package size with bradband frequency respnse, and attenuatin values frm 0 t 10, 12, 15, 20 & 30 db. Designed t meet envirnmental requirements f Precisin SMA Cnnectrs. Usable t 23 GHz. Specificatins FREQUENCY RANGE: dc t 18.6 GHz Nminal ATTN (db) Deviatin (db) , 15, 20, dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t C. 250 watts peak (5 μsec pulse width; 1% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -50 C t +125 C db VALUE DIM A (0.75) 12, 15, (0.85) (0.95) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 4H - XX Attenuatin 20 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

11 Fixed Caxial Attenuatrs Mdel 3M Mdel 4M Fixed Caxial Attenuatrs Ruggedized SMA Cnnectrs Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f Usable t 22 GHz. Specificatins FREQUENCY RANGE: Mdel 3M: dc t 12.4 GHz Mdel 4M: dc t 18.0 GHz Nminal ATTN (db) 3M 4M , , dc t 12.4 GHz dc t 18.0 GHz 2 Watts RHS POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 125 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT (Bth Mdels): db VALUE WEIGHT (Net) 1-10, g (0.35 z) 30, 40, 50, g (0.70 z) Specificatin Limit Specificatin Limit Typical Attenuatin Perfrmance f 4M-10 3M 4M dc db VALUE DIM A (0.02) 1-10, (1.20) 30, 40, 50, (1.85) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. 4M available with RHS cmpliant materials, specify when rdering. *4M - XX Specificatin Typical f a Mdel 4M-10 Mdel Attenuatin *Add Prefix M fr duble male and F fr duble female cnnectrs. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 21

12 Fixed Caxial Attenuatrs Mdel 3T Mdel 4T Fixed Caxial Attenuatrs Ruggedized SMA Cnnectrs Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f Small Package Size Usable t 22 GHz. Specificatins FREQUENCY RANGE: Mdel 3T: dc t 12.4 GHz Mdel 4T: dc t 18.0 GHz Nminal ATTN (db) 3T 4T , , dc t 12.4 GHz dc t 18.0 GHz 2 Watts RHS POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 125 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT (Bth Mdels): db VALUE WEIGHT (Net) g (0.14 z) g (0.15 z) g (0.17 z) 40, 50, g (0.23 z) Specificatin Limit Specificatin Limit T 4T dc Typical Attenuatin Perfrmance f 4T-10 Specificatin db VALUE DIM A (0.02) (0.86) (0.94) (1.04) 40, 50, (1.85) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. 4T - XX Typical f a Mdel 4T-10 Mdel Attenuatin web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

13 Fixed Caxial Attenuatrs Mdel 32 High Reliability Fixed Caxial Attenuatr dc t 18.0 GHz 2 Watts Suitable fr Space & Airbrne Applicatins Available in 0.5 db increments frm 0-20 db. Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f 100% Subjected t Thermal Shck & Peak Pwer Tests. Specificatins FREQUENCY RANGE: dc t 18.0 GHz RHS TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +125 C CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. Each unit is sealed using lw utgassing sealant. WEIGHT: db VALUE WEIGHT (Net) g (0.14 z) g (0.15 z) Nminal ATTN (db) Deviatin (db) Typical Attenuatin Accuracy f dc Specificatin Limit Specificatin Limit Specificatin db VALUE DIM A (0.02) (0.86) (0.94) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Screening Units are screened by lt as fllws: Thermal Shck: 10 cycles, -55 C t +125 C, with a minimum f 1/2 hur dwell time at each temperature extreme. Attenuatin is measured befre and after thermal shck. Peak Pwer: 500 Watts, 5 μsec pulse width; 0.05% duty cycle fr 3 minutes at each end. DC Attenuatin is measured befre and after peak pwer. Attenuatin and are tested as final electrical test. Test data is available at additinal cst Typical f a POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 125 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts Mdel 32 - XX Attenuatin web: weinschel-sales@aerflex.cm Revisin Date: 2/10/09 23

14 Fixed Caxial Attenuatrs Mdels 32J High Reliability Fixed Caxial Attenuatr Suitable fr Space & Airbrne Applicatins dc t 32.0 GHz 2 Watts RHS Available in 0.5 db increments frm 0-30 db. Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f 100% Subjected t Thermal Shck & Peak Pwer Tests. Specificatins FREQUENCY RANGE: dc t 32.0 GHz Nminal ATTN (db) Deviatin (db) / dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 100 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +100 C CONNECTORS: 2.92mm cnnectrs - mate nndestructively with SMA cnnectrs per MIL-C-39012, 3.5mm, SMK, and ther 2.92mm cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. Each unit is sealed using lw utgassing sealant. WEIGHT: 13 g (0.46 z) Aerflex / Weinschel db VALUE DIM A (0.02) (1.15) (1.23) (1.33) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Screening Units are screened by lt as fllws: Thermal Shck: 10 cycles, -55 C t +100 C, with a minimum f 1/2 hur dwell time at each temperature extreme. Attenuatin is measured befre and after thermal shck. Peak Pwer: 500 Watts, 5 μsec pulse width; 0.05% duty cycle fr 3 minutes at each end. DC Attenuatin is measured befre and after peak pwer. Attenuatin and are tested as final electrical test. Test data is available at additinal cst. Mdel 32J - XX Attenuatin EXPORT CONTROL: This prduct is cntrlled fr exprt under the Internatinal Traffic in Arms Regulatins (ITAR). A license frm the U.S. Department f State is required prir t the exprt f this prduct frm the United States. EXPORT WARNING: Aerflex s military and space prducts are cntrlled fr exprt under the Internatinal Traffic in Arms Regulatins (ITAR) and may nt be sld r prpsed r ffered fr sale t certain cuntries. (See ITAR fr cmplete infrmatin.) 24 web: weinschel-sales@aerflex.cm Revisin Date: 7/7/10

15 Fixed Caxial Attenuatrs Mdels 32J High Reliability Fixed Caxial Attenuatr Suitable fr Space & Airbrne Applicatins dc t 32.0 GHz 2 Watts RHS Available in 0.5 db increments frm 0-30 db. Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f 100% Subjected t Thermal Shck & Peak Pwer Tests. Specificatins FREQUENCY RANGE: dc t 32.0 GHz Nminal ATTN (db) Deviatin (db) / dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 100 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +100 C CONNECTORS: 2.92mm cnnectrs - mate nndestructively with SMA cnnectrs per MIL-C-39012, 3.5mm, SMK, and ther 2.92mm cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. Each unit is sealed using lw utgassing sealant. WEIGHT: 13 g (0.46 z) Aerflex / Weinschel db VALUE DIM A (0.02) (1.15) (1.23) (1.33) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Screening Units are screened by lt as fllws: Thermal Shck: 10 cycles, -55 C t +100 C, with a minimum f 1/2 hur dwell time at each temperature extreme. Attenuatin is measured befre and after thermal shck. Peak Pwer: 500 Watts, 5 μsec pulse width; 0.05% duty cycle fr 3 minutes at each end. DC Attenuatin is measured befre and after peak pwer. Attenuatin and are tested as final electrical test. Test data is available at additinal cst. Mdel 32J - XX Attenuatin EXPORT CONTROL: This prduct is cntrlled fr exprt under the Internatinal Traffic in Arms Regulatins (ITAR). A license frm the U.S. Department f State is required prir t the exprt f this prduct frm the United States. EXPORT WARNING: Aerflex s military and space prducts are cntrlled fr exprt under the Internatinal Traffic in Arms Regulatins (ITAR) and may nt be sld r prpsed r ffered fr sale t certain cuntries. (See ITAR fr cmplete infrmatin.) 24 web: weinschel-sales@aerflex.cm Revisin Date: 7/7/10

16 Fixed Caxial Attenuatrs Mdel 87 Fixed Caxial Attenuatr dc t 32.0 GHz 2 Watts Quality 2.92mm Cnnectrs Available in 0.5 db increments frm 0-30 db. Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f New Lwer Cst Cmmerical Versin. CONNECTORS: 2.92mm cnnectrs - mate nndestructively with SMA cnnectrs per MIL-C-39012, 3.5mm, SMK, and ther 2.92mm cnnectrs. CONSTRUCTION: Passivated stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 8 g (0.28 z) Specificatins FREQUENCY RANGE: dc t 32.0 GHz Nminal ATTN (db) Deviatin (db) / Aerflex / Weinschel db VALUE DIM A (0.02) (1.15) (1.23) (1.33) dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 100 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +100 C TESTING & CALIBRATION Attenuatin and are tested as final electrical test. Test data is available at additinal cst. All dimensins are given in mm (inches) and are maximum, unless therwise specified. Mdel 87 - XX Attenuatin web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 25

17 Fixed Caxial Attenuatrs Military-Qualified Attenuatrs dc t 18.0 GHz 2 t 25 Watts MIL-DTL-3933, CLASS III/IV, N/S Screened and Nn-screened mdels available. Chice f attenuatin values frm 0 t 40 db. Frequency Ranges frm dc t 18 GHz. Pwer capability frm 2 t 25 watts. Test Data supplied per Type N, SMA, & TNC Cnnectrs. MIL-DTL-3933 Infrmatin... Military Descriptin * Outline Drawing/ Part Dimensins M3933/10 dc t 18 GHz Refer t Aerflex / Weinschel (-2 thrugh -21) 25 Watts Average; 2 kw peak Standard Mdel 46 (page 41) Nn-Screened (N), Screened (S) M3933/14 dc t 12.4 GHz Refer t Aerflex / Weinschel (-01 thrugh-14, 2 watts Average; 200 W peak Standard Mdel 3M (page 21) -17 thrugh -24) Nn-Screened (N), Screened (S) M3933/16 dc t 18 GHz Refer t Aerflex / Weinschel (-01 thrugh -13, 2 watts Average; 500 W peak Standard Mdel 4M (page 21). -16 thrugh -51, -57, -58) Nn-Screened (N), Screened (S) M3933/17 dc t 18 GHz Refer t Aerflex / Weinschel (-01, -02) 4 watts Average; 500 W peak Standard Mdel 55 (page 30). Nn-Screened (N), Screened (S) M3933/18 dc t 12.4 GHz Refer t Aerflex / Weinschel (-01 thrugh -06, 5 watts Average; 1 kw peak Standard Mdel 1 (page 31). -09 thrugh -18) Nn-Screened (N), Screened (S) M3933/25 dc t 18.0 GHz Refer t Aerflex / Weinschel (-01 thrugh -54, 2 watts Average; 500 W peak Standard Mdel 3T/4T (page 22). -58 thrugh -92) Nn-Screened (N), Screened (S) *Fr cmplete specificatins and rdering infrmatin refer t Military Specificatin, 26 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

18 Fixed Caxial Attenuatrs Mdel 56 Fixed Caxial Attenuatr 3.5mm Cnnectrs Precisin 3.5mm Cnnectrs. Lw & Flat Respnse. Bulkhead ideal fr instrument frnt panels. Specificatins FREQUENCY RANGE: dc t 28.0 GHz dc t 28.0 GHz 2 Watts A RHS TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +85 C. TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: 3.5mm cnnectrs - cntact pin recessin (0 t in). CONSTRUCTION: Stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 10 g (0.28 z) maximum MAXIMUM DEVIATION OVER FREQUENCY (db): Nminal ATTN (db) DEVIATION (db) , 6, , Typical Attenuatin Accuracy f a dc Specificatin Limit Specificatin Limit Specificatin Typical f a POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.5 watts at 85 C. 500 watts peak (5 μsec pulse width; 0.2% duty cycle). POWER COEFFICIENT: < db/db/watts Mdel DIM A ( ) F ( ) M ( ) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel *56 - XX Attenuatin * Add Prefix M fr duble male and F fr duble female cnnectrs. ATTENUATOR SET (AS-20): Mdel 56 is als available in a Attenuatr Set which includes five different attenuatrs (3, 6, 10, 20, 30 db). Refer t Attenuatr Sets data sheet fr mre infrmatin. 27 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

19 Fixed Caxial Attenuatrs Mdel 54A Fixed Caxial Attenuatr dc t 42.0 GHz 2 Watts Ruggedized 2.92mm Cnnectrs Designed t meet envirnmental requirements f Ruggedized 2.92mm Cnnectrs. CONNECTORS: 2.92mm cnnectrs - mate nndestructively with SMA cnnectrs per MIL-C-39012, 3.5mm, SMK, and ther 2.92mm cnnectrs. CONSTRUCTION: Stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 13 g (0.46 z.) maximum Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: 50 Ω dc t 42.0 GHz Nminal Deviatin (db) ATTN (db) dc , , Mdel DIM A 54A 39.9 (1.57) F54A 37.9 (1.49) M54A 42.0 (1.64) dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.1 watt at 85 C. 200 watts peak (5 μsec pulse width; 0.5 % duty cycle). POWER COEFFICIENT: < db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +100 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. All dimensins are given in mm (inches) and are maximum, unless therwise specified. Mdel *54A - XX Attenuatin * Add Prefix M fr duble male and F fr duble female cnnectrs. 28 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

20 Fixed Caxial Attenuatrs Mdel 84A Fixed Caxial Attenuatr 2.4mm Cnnectrs dc t 40.0 GHz 2 Watts RHS Useable t 43 GHz. Designed t meet envirnmental requirements f Ruggedized 2.4mm Cnnectrs. TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: 2.4mm cnnectrs mate nndestructively with ther 2.4mm cnnectrs. Cntact Pin Recessin (0 t 0.003) CONSTRUCTION: Stainless steel bdy; gld plated beryllium cpper cntacts and brass cnnectrs. WEIGHT: 13 g (0.46 z.) maximum Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: 50 Ω dc t 40.0 GHz Nminal Deviatin (db) ATTN (db) dc dc POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t 0.1 watt at 125 C. 200 watts peak (5 μsec pulse width; 0.5 % duty cycle). POWER COEFFICIENT: < 0.01 db/db/watts TEMPERATURE COEFFICIENT: < db/db/ C Mdel DIM A 84A (1.50) F84A (1.34) M84A (1.66) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel *84A - XX Attenuatin * Add Prefix M fr duble male and F fr duble female cnnectrs. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 29

21 Fixed Caxial Attenuatrs Mdel 1W General Purpse Attenuatr Lw Cst, Type N dc t 4.0 GHz 2 Watts RHS CONNECTORS: Type N (male/female) cnnectrs - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Nickel-plated brass bdy and cnnectrs, gld plated Beryllium cntacts WEIGHT: 65 g (2.5 z) maximum Attenuatin Values frm 1 t 10, 20 db. Lw Cst Wireless Applicatins - Optimized fr use in the wireless cmmunicatins bands (1.79) Specificatins FREQUENCY RANGE: dc t 4.0 GHz Nminal ATTN (db) Deviatin (db) , dc All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 1W - XX Attenuatin POWER RATING: 2 watts average t 25 C ambient temperature, derated linearly t C. 250 watts peak (5 μsec pulse width; 0.4% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -20 C t +105 C. 30 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

22 Fixed Caxial Attenuatrs Mdel 55 Fixed Caxial Attenuatr TNC Cnnectrs dc t 18.0 GHz 5 Watts RHS Quality TNC Cnnectrs - This Attenuatr incrprates an imprved 18 GHz TNC cnnectr design standardized thrugh the IEC. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 18.0 GHz POWER RATING: 5 watts 25 C ambient temperature, derated linearly t C. 1 kilwatt peak (5 μsec pulse width; % duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: TNC cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 28 g (1 z) maximum Nminal ATTN (db) Deviatin (db) , dc All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering XX Mdel Attenuatin web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 31

23 Fixed Caxial Attenuatrs Mdel 1 Mdel 2 Fixed Caxial Attenuatrs Type N Cnnectrs Rugged injectin mlded cnnectrs. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: Mdel 1: dc t 12.4 GHz Mdel 2: dc t 18.0 GHz Nminal ATTN (db) , , dc t 12.4 GHz dc t 18.0 GHz 5 Watts RHS POWER RATING: 5 watts average t 25 C ambient temperature, derated linearly t 45 C, 65 C, 85 C, 105 C, C. Nte: db values 1, 2 and 3 can handle 10 watts.1 kilwatt peak (5 μsec pulse width; 0.25% duty cycle). POWER COEFFICIENT: <0.005 db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: Precisin Type N cnnectrs per MIL- STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. CONSTRUCTION: Stainless steel bdy and cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: db VALUE WEIGHT (Net) 1-10, 20, g (2.6 z) 40, 50, g (3.6 z) Specificatin Limit Specificatin Limit Typical Attenuatin Perfrmance f Mdel dc db VALUE DIM A 1-10, 20, (2.28) 40, 50, (2.68) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. *1 - XX Specificatin Typical f Mdel 2-10 Mdel Attenuatin *Add Prefix M fr duble male r F fr duble female cnnectrs. ATTENUATOR SET (AS-6): Mdel 2 is als available in a Attenuatr Set which includes fur different attenuatrs (3, 6, 10, 20 db). Refer t Attenuatr Sets data sheet fr mre infrmatin. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

24 Fixed Caxial Attenuatrs Mdel 44 Lab Standard Fixed Caxial Attenuatr dc t 18.0 GHz 5 Watts Lab Standard N Cnnectrs Nminal ATTN (db) Deviatin (db) , , Precisin Cnnectrs Test data - A certificate f test supplied with each attenuatr. Hex Nut Cnnectr - Allws fr use f a trque wrench t imprve cnnectr repeatability. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 18.0 GHz Specificatin Limit Specificatin Limit Typical Attenuatin Accuracy f a 44-6 dc POWER RATING: 5 watts average t 25 C ambient temperature, derated linearly t 4 45 C, 3 65 C, and 2 85 C. 1 kilwatt peak (5 μsec pulse width; 0.25% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C TEMPERATURE RANGE: -50 C t +85 C TEST DATA: Insertin lss and data supplied at 0.05, 4, 8, 12 and 18 GHz. Other test data available at additinal cst. CONNECTORS: Precisin Type N per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cupling Trque: in/lbs. CONSTRUCTION: Brass Bdy (plated) and Stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: db VALUE WEIGHT (Net) 1-10, 20, g (3.5 z) 40, 50, g (4.5 z) Ø (.88) MAX All dimensins are given in mm (inches) and are maximum, unless therwise specified ( ) db VALUE 3/4 HEX NAME PLATE TYP DIM "A" MAX *44 - XX ( ) DIM A Prefix M STD Prefix F 0-10, 20, (3.0) 76.2 (3.0) 77.7 (3.06) 40, 50, (3.4) 86.4 (3.4) 87.9 (3.46) Ø (.64) MAX TYP Specificatin Typical f a 44-6 Mdel Attenuatin *Add Prefix M fr duble male r F fr duble female cnnectrs. ATTENUATOR SET (AS-18): Mdel 44 is als available in a Attenuatr Set which includes six different attenuatrs (1, 3, 6, 10, 20, 30 db). Refer t Attenuatr Sets data sheet fr mre infrmatin. web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10 33

25 Fixed Caxial Attenuatrs Mdel 69A Medium Pwer Fixed Caxial Attenuatr SMA Cnnectrs, Bi-directinal Design dc t 18.0 GHz 5 Watts RHS Cmpact Cnstructin - Lwest size/pwer rati. Precisin Injectin Mlded Cnnectrs. Designed t meet envirnmental requirements f Flat Respnse & Lw. Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: Nminal ATTN (db) 50 Ω dc t 18.0 GHz Deviatin (db) , 20, POWER RATING (munted hrizntally): 5 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. 500 watts peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: <0.003 db/db/watt TEMPERATURE RANGE: -55 C t 100 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: SMA cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with SMK, 3.5mm, 2.92mm and SMA cnnectrs per MIL-C Cnnectr Optins Type/Descriptin 1 SMA, Female 2 SMA, Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: Net 10 g (0.35 z) maximum 8.4 (.34) MAX /-.76 (1.32 +/-.03) Specificatin Limit Specificatin Limit Ø 15.9 (.625) Typical Attenuatin Accuracy f a 69A-10 dc Specificatin 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. 69A - XX - 12* Typical f a 69A-10 Mdel Attenuatin Cnnectr Optins -11 Female/Female -12 Male/Female -22 Male/Male *Unit is bi-directinal and full pwer may be applied t either cnnectr. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

26 Fixed Caxial Attenuatrs Mdel 75A Medium Pwer Fixed Caxial Attenuatr dc t 42.0 GHz 5 Watts Bi-directinal Design Cmpact Cnstructin - Lwest size/pwer rati. Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f Flat Respnse. Specificatins FREQUENCY RANGE: dc t 42.0 GHz TEMPERATURE RANGE: -55 C t 125 C TEST DATA SUPPLIED: Sweep /Attenuatin data/ plts perfrmed acrss GHz frequency range. CONNECTORS: 2.92mm (Male/Female) cnnectrs - mate nndestructively with SMA per MIL-C-39012, 3.5mm and ther 2.92mm cnnectrs. Cnnectr Optins Type/Descriptin mm, Female mm, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 200 g (7.0 z.) maximum Nminal Deviatin (db) ATTN (db) dc-26.5 GHz GHz , 10, 20, dc POWER RATING (munted hrizntally): 5 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. 200 watts peak (5 μsec pulse width; 1.25% duty cycle). POWER COEFFICIENT: <0.002 db/db/watt Dash N. Cnnectr Type DIM A mm Female/Female 39.9 (1.56) mm Male/Female 44.1 (1.74) mm Male/Male 48.8 (1.92) All dimensins are given in mm (inches) and are nminal, unless therwise specified. Mdel 75A - XX - XX* Attenuatin Cnnectr Optins -11 Female/Female -12 Female/Male -22 Male\Male *Unit is bi-directinal and full pwer may be applied t either cnnectr. 35 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10

27 Fixed Caxial Attenuatrs Mdel 41 Medium Pwer Fixed Caxial Attenuatr Bi-directinal Design dc t 18.0 GHz 10 Watts RHS Cmpact Cnstructin - Lwest size/pwer rati. Quality Cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal ATTN (db) Deviatin (db) 1, , POWER RATING (munted hrizntally): 10 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. 1 kilwatt peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.0, and 18.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: SMA (Male/Female) cnnectrs per MIL- STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 1 SMA, Female 2 SMA, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 28 g (1 z.) maximum (.65) MAX Specificatin Limit Specificatin Limit A (1.16) MAX. A dc Typical Attenuatin Accuracy Specificatin Typical f a All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel Cnnectr DIM A SMA Male (0.44) SMA Female 9.4 (0.37) 41 - XX - XX* Attenuatin Cnnectr Optins -11 Female/Female -12 Female/Male -22 Male\Male 36 * Unit is bi-directinal and full pwer may be applied t either cnnectr. web: weinschel-sales@aerflex.cm Revisin Date: 5/12/09

28 Fixed Caxial Attenuatrs Mdel 37 Medium Pwer Fixed Caxial Attenuatr Bi-directinal Design! dc t 8.5 GHz 10 Watts RHS Optimized fr Wireless OEM & Test Applicatins. Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f TEST DATA: Insertin lss test data supplied at 0.05, 2.0, 4.0, 8.0 and 8.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 110 g (4 z.) maximum Specificatins FREQUENCY RANGE: dc t 8.5 GHz Nminal Deviatin (db) ATTN (db) dc-4 GHz GHz 3, 6, 10, dc POWER RATING (munted hrizntally): 10 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 20 Watts average (bi-directinal). 1 kilwatt peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: <0.005 db/db/watt TEMPERATURE RANGE: -55 C t 125 C 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel Cnnectr DIM A N Male 24.1 (0.95) N Female 19.1 (0.75) 37 - XX - XX* Attenuatin Cnnectr Optins 1st digit is J1 side 2nd digit is J2 side *Unit is bi-directinal and full pwer may be applied t either J1 r J2. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 37

29 Fixed Caxial Attenuatrs Mdel 23 Medium Pwer Fixed Caxial Attenuatr dc t 18.0 GHz 10 Watts Bi-directinal Design! Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal ATTN (db) Deviatin (db) 1, , , , RHS POWER RATING (munted hrizntally): 10 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 1, 2, 3 db mdels can handle 20 Watts average (bi-directinal). 1 kilwatt peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.0, and 18.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 110 g (4 z.) maximum Specificatin Limit Specificatin Limit dc Typical Attenuatin Accuracy f a Specificatin Cnnectr DIM A N Male 24.1 (0.95) N Female 19.1 (0.75) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering XX - 34* Typical f a Mdel Attenuatin Cnnectr Optins -34 Male/Female nly! * Unit is bi-directinal and full pwer may be applied t either J1 r J2. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

30 Fixed Caxial Attenuatrs Mdel 89 Medium Pwer Fixed Caxial Attenuatr dc t 40.0 GHz 20 Watts Higher Pwer Vs Frequency Design Cmpact Cnstructin - Lwest size/pwer rati. Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f Flat Respnse. Specificatins TEST DATA SUPPLIED: Sweep /Attenuatin data/ plts perfrmed acrss GHz frequency range. CONNECTORS: 2.92mm (Male/Female) cnnectrs - mate nndestructively with SMA per MIL-C-39012, 3.5mm and ther 2.92mm cnnectrs. Cnnectr Optins Type/Descriptin mm, Female mm, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 200 g (8.0 z.) maximum FREQUENCY RANGE: dc t 40.0 GHz Nminal Deviatin (db) ATTN (db) dc-18 GHz GHz 10, 20, /-0.0 dc POWER RATING (munted hrizntally): 20 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. 200 watts peak (5 μsec pulse width; 1.25% duty cycle). Maximun in pwer int utput prt is 5 Watts. POWER COEFFICIENT: <0.002 db/db/watt TEMPERATURE RANGE: -55 C t 125 C Dash N. Cnnectr Type DIM A mm Female/Female (4.18) mm Female/Male (4.30) mm Male/Female (4.30) mm Male/Male (4.40) All dimensins are given in mm (inches) and are nminal, unless therwise specified. Mdel 89 - XX -XX Attenuatin Cnnectr Optins -11 Female/Female -12 Female/Male -21 Male/Female -22 Male/Male web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 39

31 Fixed Caxial Attenuatrs Mdel 34 Medium Pwer Fixed Caxial Attenuatr Bi-directinal Design dc t 4.0 GHz 25 Watts RHS Optimized fr Wireless OEM & Test Applicatins. Precisin Cnnectrs with high temperature supprt beads. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 4.0 GHz TEST DATA: Insertin lss test data supplied at 0.05, and 4.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 170 g (6 z.) maximum Nminal Deviatin (db) ATTN (db) dc-2 GHz 2-4 GHz 3, 6, 10, 20, MAXIMUM *: dc POWER RATING (munted hrizntally): 25 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 50 Watts average (bi-directinal). 5 kilwatt peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 34 - XX - XX* Attenuatin Cnnectr Optins 1st digit is J1 side 2nd digit is J2 side *Unit is bi-directinal and full pwer may be applied t either J1 r J2. 40 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

32 Fixed Caxial Attenuatrs Mdel 33 Medium Pwer Fixed Caxial Attenuatr dc t 8.5 GHz 25 Watts Bi-directinal Design! Quality Cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Lw Intermdulatin ptin available. Mde free peratin t 10 GHz. Specificatins FREQUENCY RANGE: dc t 8.5 GHz MAXIMUM DEVIATION OVER FREQUENCY (db): Nminal dc-4 GHz GHz ATTN (db) LIM LIM 3, , RHS POWER RATING (munted hrizntally): 25 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 50 Watts average (bi-directinal). 5 kilwatt peak (5 μsec pulse width; 0.25% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, and 8.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N & 2.92mm cnnectrs per MIL- STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Optins Descriptin Optins Descriptin mm Female 3 Type N, Female mm Male 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 170 g (6 z.) maximum Specificatin Limit Specificatin Limit dc Typical Attenuatin Accuracy f a Specificatin Typical f a rd ORDER INTERMODULATION (33-XX-XX-LIM Only): Reflected Levels (IM3), -100 dbc and Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +41 dbm each. IM specificatin at J2 limited t 10 Watts f input pwer. Cnnectr DIM A Cnnectr DIM A N Male 22.9 (0.90) 2.92mm Female N Female 15.0 (0.59) 2.92mm Male 14.0 (0.55) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 33 - XX - XX* - LIM Attenuatin IM Optin** Cnnectr Optins 1st digit is J1 side 2nd digit is J2 side *Unit is bi-directinal & full pwer may be applied t either J1 r J2. **Add -LIM t entire mdel number fr Lw Intermdulatin ptin. Available in nly 10, 20, 30 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 41

33 Fixed Caxial Attenuatrs Mdel 46 Medium Pwer Fixed Caxial Attenuatr dc t 18.0 GHz 25 Watts Bi-directinal Design! Designed t meet envirnmental requirements f Rugged injectin mlded cnnectr dielectric. Lw Intermdulatin ptin available. Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal LIM ATTN (db) dc - 8 GHz 8-18 GHz 3, / / , /-1.0 RHS POWER RATING (munted hrizntally): 25 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 50 Watts average (bi-directinal). 1 kilwatt peak (5 μsec pulse width; 1.25% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.0, and 18.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. 3.5mm Cnnectrs - mate nndestructively with SMA per MIL-C-39012, 2.92mm and ther 3.5mm cnnectrs. Optins Descriptin Optins Descriptin 1 3.5mm Female 3 Type N Female 2 3.5mm Male 4 Type N Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel cnnectrs with gld plated beryllium cpper cntacts. WEIGHT: 110 g (4 z.) maximum Specificatin Limit Specificatin Limit Typical Attenuatin Accuracy f a dc Specificatin Typical f a rd ORDER INTERMODULATION (46-XX-XX-LIM ONLY): Reflected Levels (IM3), -90 dbc and Thrugh Levels (IM3), -100 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +41 dbm each. Optin nly available 10, 20, 30, 40 db. Cnnectr DIM A Cnnectr DIM A N Male 24.1 (0.95) 3.5mm Female 14.0 (0.55) N Female 19.0 (0.75) 3.5mm Male 13.2 (0.52) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 46 - XX - XX* - LIM Attenuatin IM Optin** Cnnectr Optins 1st digit is J1 side 2nd digit is J2 side * Unit is bi-directinal & full pwer may be applied t either J1 r J2. ** Add -LIM fr Lw Intermdulatin ptin. Optin nly available in 10, 20, 30 and 40 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

34 Fixed Caxial Attenuatrs Mdel 74 Medium Pwer Fixed Caxial Attenuatr dc t 28.0 GHz 25 Watts 3.5mm Cnnectrs Cmpact Cnstructin - Lwest size/pwer rati. Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f Lw Design. Specificatins FREQUENCY RANGE: dc t 28 GHz TEST DATA SUPPLIED: Sweep /Attenuatin data/ plts perfrmed acrss GHz frequency range. CONNECTORS: 3.5mm (Male/Female) cnnectrs - mate nndestructively with SMA per MIL-C-39012, 2.92mm and ther 3.5mm cnnectrs. Cnnectr Optins Type/Descriptin 1 3.5mm, Female 2 3.5mm, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 100 g (3.5 z.) maximum Nminal ATTN (db) Deviatin (db) , , dc POWER RATING: 25 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. 500 watts peak (5 μsec pulse width; 2.5% duty cycle). Maximum pwer rating int utput is 10% f the average pwer rating. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C All dimensins are given in mm (inches) and are maximum, unless therwise specified. Mdel Cnnectr DIM A 3.5mm Male 16.0 (0.63) 3.5mm Female 15.0 (0.59) 74 - XX -XX Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10 43

35 Fixed Caxial Attenuatrs Mdel 72 Medium Pwer Fixed Caxial Attenuatr dc t 4.0 GHz 50 Watts Cnductin Cled Cmpact Cnstructin - Lwest size/pwer rati. Precisin Cnnectrs with high temperature supprt beads. Designed t meet envirnmental requirements f Wireless Applicatins - Optimized fr use in the cmmunicatins bands. Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: 50 Ω dc t 4.0 GHz RHS TEMPERATURE RANGE: -55 C t 100 C (case) TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. 2.92mm cnnectrs mate with SMA, 3.5mm, Type K and ther 2.92mm cnnectrs. Cnnectr Optins Type/Descriptin mm, Female mm, Male 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 170 g (6 z.) maximum Nminal ATTN (db) Deviatin (db) 3, 6, 10, 20, 30, Specificatin Limit Specificatin Limit Typical Attenuatin Accuracy f a Specificatin Typical f a dc POWER RATING 50 watts average (unidirectinal), 5 kilwatts peak (5 μsec pulse width; 0.5 % duty cycle) with case temperature held within 100 C maximum with apprpriate cnductive heat sink. Maximum pwer rating int utput prt is 10% f the average pwer rating. POWER COEFFICIENT: < db/db/watt Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 2.92mm, Male 14.0 (0.55) 2.92mm, Female 12.7 (0.50) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 72 - XX -XX Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

36 Fixed Caxial Attenuatrs Mdel 24 Medium Pwer Fixed Caxial Attenuatr dc t 8.5 GHz 50 Watts Bi-Directinal Design! Specificatins FREQUENCY RANGE: dc t 8.5 GHz Designed t meet envirnmental requirements f Lw Intermdulatin ptin available. Mde free peratin t 10 GHz. MAXIMUM DEVIATION OVER FREQUENCY (db): Nminal dc-4 GHz GHz ATTN (db) LIM LIM 3, , , Specificatin Limit Specificatin Limit RHS POWER RATING (munted hrizntally): 50 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 100 Watts average (bi-directinal). 5 kilwatt peak (5 μsec pulse width; 0.5% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, and 8.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. 2.92mm cnnectrs - mate nndestructively with SMA per MIL-C-39012, 3.5mm, SMK, and ther 2.92mm. Female 2.92mm cnnectr NOT RHS cmpliant. Optins Descriptin Optins Descriptin mm, Female 3 Type N, Female mm, Male 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 280 g (10 z.) maximum Typical Attenuatin Accuracy f a dc Specificatin Typical f a rd ORDER INTERMODULATION (24-XX-XX-LIM nly!): Reflected Levels (IM3), -100 & Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. Optin nly available 10, 20, 30, 40 db. IM specificatin at J2 limited t 20 Watts f input pwer. Cnnectr DIM A Cnnectr DIM A N Male 22.9 (0.90) 2.92mm Male 14.0 (0.55) N Female 15.0 (0.59) 2.92mm Female 12.7 (0.50) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 24 - XX - XX* - LIM Attenuatin IM Optin** Cnnectr Optins 1st digit is J1 side 2nd digit is J2 side *Unit is bi-directinal & full pwer may be applied t either J1 r J2. **Add -LIM t entire mdel number fr Lw Intermdulatin ptin. Optin nly available in 10, 20, 30, 40 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 45

37 Fixed Caxial Attenuatrs Mdel 90 Medium Pwer Fixed Caxial Attenuatr Bi-directinal Design! dc t 18.0 GHz 50 Watts RHS TEST DATA SUPPLIED: Sweep /Attenuatin data/ plts perfrmed acrss 50 MHz t 18 GHz frequency range. Frequency Markers 0.05, 2.0, , 12.4, 18 GHz. CONNECTORS: Type N (Male/Female) cnnectrs - mate nndestructively with ther N cnnectrs per MIL-C Cnnectr Optins Type/Descriptin 3 N, Female 4 N, Male CONSTRUCTION: Black, finned aluminum bdy, gld plated beryllium cpper cntacts. WEIGHT: 120 g (4.2 z.) maximum Precisin injectin mlded cnnectr dielectric. Designed t meet envirnmental requirements f Flat Respnse. Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal ATTN (db) Deviatin (db) 3, , dc POWER RATING (munted hrizntally): 50 watts average (bi-directinal) t 25 C ambient temperature, derated linearly t C. 1 kw peak (5 μsec pulse width; 2.5% duty cycle). POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel Cnnectr DIM A N Male 24.1 (0.95) N Female 19.0 (0.75) 90 - XX -XX Attenuatin Cnnectr Optins -33 Female/Female -34 Female/Male -44 Male/Male 46 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

38 Fixed Caxial Attenuatrs Mdel 47 Medium Pwer Fixed Caxial Attenuatr Type N Cnnectrs dc t 18.0 GHz 50 Watts RHS Designed t meet envirnmental requirements f Lw Intermdulatin ptin available. Rugged injectin mlded cnnectr dielectric. Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal LIM ATTN (db) dc-8 GHz 8-18 GHz 3, , / , /-0.5 POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.0, and 18.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. 3.5mm Cnnectrs - mate nndestructively with SMA per MIL-C-39012, 2.92mm and ther 3.5mm cnnectrs. Optins Descriptin Optins Descriptin 1 3.5mm Female 3 Type N Female 2 3.5mm Male 4 Type N Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel cnnectrs with gld plated beryllium cpper cntacts. WEIGHT: 175 g (6 z.) maximum 3, 6 db 10, 20, 30, 40 db dc rd ORDER INTERMODULATION (47-XX-XX-LIM ONLY: Reflected Levels (IM3), -90 & Thrugh Levels (IM3), -100 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. Optin nly available 10, 20, 30, 40 db. POWER RATING (munted hrizntally): 50 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 100 Watts average (unidirectinal). 1 kilwatt peak (5 μsec pulse width; 2.5% duty cycle). Maximum pwer rating int utput prt is 10 Watts average. Cnnectr DIM A Cnnectr DIM A N Male 24.1 (0.95) 3.5mm Female 14.0 (0.55) N Female 19.0 (0.75) 3.5mm Male 13.2 (0.52) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel 47 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side * Add -LIM fr Lw Intermdulatin ptin. Optin nly available in 10, 20, 30 and 40 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 3/2/10 47

39 Fixed Caxial Attenuatrs Mdel 86 Medium Pwer Fixed Caxial Attenuatr Cnductin Cled, 3.5mm Cnnectrs dc t 22.0 GHz 50 Watts RHS CONSTRUCTION: Aluminum bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 60 g (2.1 z.) maximum Cmpact Cnstructin - Lwest size/pwer rati. Precisin Cnnectrs with high temperature supprt beads. Designed t meet envirnmental requirements f Ideal fr Airbrne r Space Applicatins. Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: 50 Ω dc t 22.0 GHz Nminal ATTN (db) Deviatin (db) 3, 6, 10, 20, POWER RATING 50 watts average (bi-directinal), 1 kilwatts peak (5 μsec pulse width; 0.5 % duty cycle) with case temperature held within 90 C maximum with apprpriate cnductive heat sink. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 90 C (case) CONNECTORS: 3.5mm cnnectrs - mate nndestructively with SMA per MIL-C-39012, 2.92mm and ther 3.5mm cnnectrs. Optins Descriptin 1 3.5mm Female 2 3.5mm Male All dimensins are given in mm (inches) and are nminal, unless therwise specified. Mdel Cnnectr DIM A 3.5mm Male ( ) 3.5mm Female ( ) 86 - XX -XX Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side 48 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

40 Fixed Caxial Attenuatrs Mdel 59 High Pwer Fixed Caxial Attenuatr dc t 2.5 GHz 100 Watts Cnductin Cled Precisin Cnnectrs with high temperature supprt beads. Designed t meet envirnmental requirements f 10 Kilwatts peak, Cnductive Cled Wireless Applicatins - Optimized fr use in the cmmunicatins bands. Specificatins FREQUENCY RANGE: dc t 2.5 GHz RHS TEMPERATURE RANGE: -55 C t 100 C (case temp) TEST DATA: Insertin lss test data supplied at 0.05, 0.5, 1.0, 1.5, 2.0 and 2.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 150 g (5.2 z.) maximum Nminal Deviatin (db) ATTN (db) dc-1 GHz GHz 3, 6, 10, 20, 30, dc POWER RATING 100 watts average (unidirectinal), 10 kilwatts peak (5 μsec pulse width; 0.4 % duty cycle) with case temperature held within 100 C maximum with apprpriate cnductive heat sink. Nte: 3 db mdel can handle 200 Watts average (unidirectinal). Maximum pwer rating int utput prt is 10 % f the average pwer rating. POWER COEFFICIENT: < db/db/watt TEMPERATURE COEFFICIENT: < db/db/ C 1. All dimensins are given in mm (inches) and tlerances are.x+0.5 (0.02) &.XX+0.25 (0.01), unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering 59 - XX -XX Mdel Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 49

41 Fixed Caxial Attenuatrs Mdel 68 High Pwer Fixed Caxial Attenuatr dc t 4.0 GHz 100 Watts Cnvectin Cled Precisin Cnnectrs with high temperature supprt beads. Designed t meet envirnmental requirements f 10 Kilwatts peak, Cnvectin Cled Wireless Applicatins - Optimized fr use in the cmmunicatins bands. Specificatins FREQUENCY RANGE: dc t 4.0 GHz Nminal ATTN (db) Deviatin (db) 1, , 6, 10, 20, POWER RATING (munted hrizntally): 100 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 200 Watts average (unidirectinal). 10 kilwatts peak (5 μsec pulse width; 0.5% duty cycle). Maximum pwer rating int utput prt is 10% f the average pwer rating. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 100 C TEST DATA: Insertin Lss and Testing perfrmed acrss frequency range. Test data available at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 500 g (18 z.) maximum 68 - XX -XX RHS dc Mdel Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side 50 Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. web: weinschel-sales@aerflex.cm Revisin Date: 10/20/09

42 Fixed Caxial Attenuatrs Mdel 48 High Pwer Fixed Caxial Attenuatr Type N r 3.5mm Cnnectrs dc t 18.0 GHz 100 Watts RHS Designed t meet envirnmental requirements f Lw Intermdulatin ptin available. Rugged injectin mlded cnnectrs. Specificatins FREQUENCY RANGE: dc t 18.0 GHz TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.4, and 18.0 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. 3.5mm (Male/Female) cnnectrs - mate nndestructively with SMA per MIL-C-39012, 2.92mm and ther 3.5mm cnnectrs. Cnnectr Optins Type/Descriptin 1 3.5mm, Female 2 3.5mm, Male 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel cnnectrs, gld plated beryllium cpper cntacts. WEIGHT: 320 g (11 z.) maximum MAXIMUM DEVIATION OVER FREQUENCY (db): Nminal LIM ATTN (db) dc-8 GHz 8-18 GHz / / , /-0.0 Frequency LIM (GHz) 6 db 10 db 20, 30, 40 db dc : POWER RATING (munted hrizntally): 100 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. 1 kilwatt peak (5 μsec pulse width; 5% duty cycle). Maximum pwer rating int utput prt is 10 Watts average. 3rd ORDER INTERMODULATION (48-XX-XX-LIM nly): Reflected Levels (IM3), -90 dbc & Thrugh Levels (IM3), -100 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. POWER COEFFICIENT: < db/db/watt 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel Cnnectr DIM A 3.5mm Female 13.2 (0.52) 3.5mm Male 14.0 (0.55) N Male 24.1 (0.95) N Female 19.0 (0.75) 48 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side * Add -LIM t entire mdel number fr Lw Intermdulatin ptin. Optin is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 51

43 Fixed Caxial Attenuatrs Mdel 73 High Pwer Fixed Caxial Attenuatr Type N Cnnectrs Cmpact Cnstructin - Lwest size/pwer rati. Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 8.5 GHz Nminal Deviatin (db) ATTN (db) dc-4 GHz GHz 3, 6, 10, 20, dc POWER RATING (munted hrizntally with fins vertical): 100 watts average (unidirectinal) t 35 C ambient temperature, derated linearly t C. Nte: 3 db mdel can handle 200 Watts average (unidirectinal). 5 kilwatt peak (5 μsec pulse width; 1.0% duty cycle). Maximum pwer rating int utput prt is 20 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 4.0, and 8.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 1130 g (2 lbs, 8 z.) maximum Mdel dc t 8.5 GHz 100 Watts 73 - XX -XX Attenuatin RHS Cnnectr Optins 1st digit is input side 2nd digit is utput side All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

44 Fixed Caxial Attenuatrs Mdel 40 Mdel 57 High Pwer Fixed Caxial Attenuatr Type N Cnnectrs Specificatins FREQUENCY RANGE: Mdel 40: dc t 1.5 GHz Mdel 57: dc t 5.0 GHz Nminal Deviatin (db) ATTN (db) LIM 3* , , Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Input Output dc - 2 (1.5*) (1.10*) * Mdel 40 nly! 3rd ORDER INTERMODULATION (57-XX-XX-LIM ONLY): Reflected Levels (IM3), -100 & Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. Optin nly available 6, 10, 20, 30, 40 db. dc t 1.5 GHz dc t 5.0 GHz 150 Watts RHS POWER RATING (munted hrizntally with fins vertical): 150 watts average (unidirectinal) t 55 C ambient temperature, derated linearly t 125 C. Nte: 3 db mdel can handle 300 Watts average (unidirectinal). 10 kilwatt peak (5 μsec pulse width; 0.75% duty cycle). Maximum pwer rating int utput prt is 20 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 1, 2, 3, 4, and 5 GHz (Mdel 40 at 0.05 and 1.5 GHz). Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium female cpper cntacts and stainless steel male cntacts. WEIGHT: 1,130 g (2 lbs, 8 z.) maximum Mdel 57 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side * Add -LIM fr Lw Intermdulatin ptin. Optin nly available with Mdel 57 in 6, 10, 20, 30, 40 db and is nt available thrugh Express. Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 53

45 Fixed Caxial Attenuatrs Mdel 65 High Pwer Fixed Caxial Attenuatr dc t 2.5 GHz 150 Watts Cnductin/Cnvectin Cled Cmpact Cnstructin - Lwest size/pwer rati. Flexible Munting Psitin - The units may be munted in hrizntal (fins up) r vertical psitin. Rugged Cnstructin - Quality cnnectrs with special high temperature supprt beads. Specificatins FREQUENCY RANGE: dc t 2.5 GHz Nminal ATTN (db) Deviatin (db) 3, 6, 10, 20, dc POWER RATING 150 watts average (unidirectinal), 10 kilwatts peak (5 μsec pulse width; 0.5 % duty cycle) with case temperature held within 100 C maximum with apprpriate cnvectin cling and/r cnductive heat sink. Maximum pwer rating int utput prt is 20 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 100 C (case temp.) TEST DATA: Insertin lss test data supplied at 0.05, 0.5, 1.0, 1.5, 2.0 and 2.5 GHz. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 850 g (1 lbs., 14 z.) maximum Mdel 65 - XX -XX Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) All dimensins are given in mm (inches) and are maximum, unless therwise specified. 54 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

46 Fixed Caxial Attenuatrs Mdel 49 High Pwer Fixed Caxial Attenuatr Cnductin/Cnvectin Cled Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Flexible Munting Psitin - The units may be munted in hrizntal (fins up) r vertical psitin. Specificatins FREQUENCY RANGE: dc t 8.5 GHz MAXIMUM DEVIATION OVER FREQUENCY (db): Nminal dc-4 GHz GHz ATTN (db) LIM LIM 3, , dc t 8.5 GHz 150 Watts RHS TEST DATA: Insertin lss test data supplied at 0.05, 4.0, and 8.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper female cntacts r stainless steel male cntacts. (-LIM ptin uses different cnnectr and cntact materials) WEIGHT: 1,450 g (3 lbs, 3 z.) maximum dc rd ORDER INTERMODULATION (49-XX-XX-LIM ONLY): Reflected Levels (IM3), -95 & Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. POWER RATING (munted hrizntally r vertically): 150 watts average (unidirectinal) t 35 C ambient temperature, derated linearly t C. 5 kilwatt peak (5 μsec pulse width; 1.5% duty cycle). Maximum pwer rating int utput prt is 25 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Mdel Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 49 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side *Add -LIM fr Lw Intermdulatin ptin. Optin nly available in 10, 20, 30, and 40 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 55

47 Fixed Caxial Attenuatrs Mdel 66 High Pwer Fixed Caxial Attenuatr dc t 18.0 GHz 150 Watts Cnvectin Cled Quality injectin mlded cnnectrs. Designed t meet envirnmental requirements f Bradband perfrmance, ideal fr test applicatins. Specificatins FREQUENCY RANGE: dc t 18.0 GHz Nminal ATTN (db) Deviatin (db) , 30, , 30, 40 db dc POWER RATING (munted hrizntally): 150 watts average case temperature f -55 C t +100 C maximum. 1 kilwatt peak (5 μsec pulse width; 7.5% duty cycle). Maximum pwer rating int utput prt is 10 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 100 C (case temp.) TEST DATA: Insertin lss test data supplied at 0.05, 4.0, 8.0, 12.4 and 18.0 GHz. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 480 g (17 z.) maximum Mdel 66 - XX -XX Attenuatin RHS Cnnectr Optins 1st digit is input side 2nd digit is utput side 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. 56 web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

48 Fixed Caxial Attenuatrs Mdel 45 Mdel 58 High Pwer Fixed Caxial Attenuatr Cnvectin Cled Specificatins FREQUENCY RANGE: Mdel 45: dc t 1.5 GHz Mdel 58: dc t 5.0 GHz Nminal Deviatin (db) ATTN (db) LIM 3*, , , Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f 45/58 58 LIM Input Output Input Output dc - 2 (1.5*) (1.10*) * Mdel 45 nly! 3rd ORDER INTERMODULATION (58-XX-XX-LIM ONLY): Reflected Levels (IM3), -100 & Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. dc t 1.5 GHz dc t 5.0 GHz 250 Watts RHS POWER RATING (munted hrizntally with fins vertical): 250 watts average (unidirectinal) t 55 C ambient temperature, derated linearly t 125 C. 10 kilwatt peak (5 μsec pulse width; 1.25% duty cycle). Maximum pwer rating int utput prt is 50 watts average. Nte: Mdel 45-3-XX is rated fr 500 Watts average (unidirectinal) int the input and 250 Watts average (maximum) int the utput prt. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C TEST DATA: Insertin lss test data supplied at 0.05, 1, 2, 3, 4 and 5 GHz (Mdel 45 at 0.05 and 1.5 GHz). Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 1,530 g (6 lbs, 3 z.) maximum Mdel 58 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side *Add -LIM fr Lw Intermdulatin ptin. Optin nly available with Mdel 58 in 10, 20, 30, 40 db and is nt available thrugh Express. Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. web: weinschel-sales@aerflex.cm Revisin Date: 7/13/10 57

49 Fixed Caxial Attenuatrs Mdel 67 High Pwer Fixed Caxial Attenuatr Frced Cled dc t 12.7 GHz 350 Watts RHS Precisin Injectin Mlded Cnnectrs. Designed t meet envirnmental requirements f Bradband perfrmance, ideal fr test applicatins. Specificatins FREQUENCY RANGE: dc t 12.7 GHz Nminal Deviatin (db) ATTN (db) dc-8 GHz GHz / , /-0.00 POWER RATING (munted hrizntally): 350 watts average 25 C ambient temperature. Case temperature must be held t 100 C maximum. 5 kilwatt peak (5 μsec pulse width; 3.5% duty cycle). Maximum pwer rating int utput prt is 10 watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 100 C (case temp.) TEST DATA: Insertin lss test data supplied at 0.05, 0.5, 4.0, 8.0 & 12.0 GHz. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, stainless steel cnnectrs; gld plated beryllium cpper cntacts. WEIGHT: 1200 g (43 z.) maximum 67 - XX -XX dc Mdel Attenuatin Cnnectr Optins 1st digit is input side 2nd digit is utput side All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

50 Fixed Caxial Attenuatrs Mdel 53 High Pwer Fixed Caxial Attenuatr dc t 2.5 GHz 500 Watts Cnductin/Cnvectin Cled Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Flexible Munting Psitin - The units may be munted in hrizntal (fins up) r vertical psitin. Lw Intermdulatin Distrtin Optin. Specificatins FREQUENCY RANGE: dc t 2.5 GHz TEST DATA: Insertin lss test data supplied at 0.05, 2.5 GHz. Other test data can be prvided at additinal cst. CONNECTORS: Type N cnnectrs per MIL-STD-348 interface dimensins - mate nndestructively with MIL-C cnnectrs. Cnnectr Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Aluminum ally bdy, gld plated beryllium cpper cntacts. WEIGHT: 3,640 g (8 lbs.) maximum Nminal ATTN (db) Deviatin (db) LIM 3, , 20, 30, LIM dc Munting Hles UNF-2B x 0.44 MIN Depth, 4 Hles 3rd ORDER INTERMODULATION (53-XX-XX-LIM ONLY): Reflected Levels (IM3), -100 & Thrugh Levels (IM3), -110 dbc with tw input 869 MHz and 891 MHz with average carrier pwer levels f +43 dbm each. POWER RATING (munted hrizntally with fins vertical): 500 watts average (unidirectinal) t 35 C ambient temperature, derated linearly t C. 10 kilwatt peak (5 μsec pulse width; 2.5% duty cycle). Maximum pwer rating int utput prt is 45 watts average. Nte: 3 db units are rated fr 750 Watts average (unidirectinal) int the input and 250 Watts average (maximum) int the utput prt. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t 125 C All dimensins are given in mm (inches) and are maximum, unless therwise specified. Mdel Cnnectr DIM A N Male 22.9 (0.90) N Female 15.0 (0.59) 53 - XX -XX- LIM Attenuatin IM Optin* Cnnectr Optins 1st digit is input side 2nd digit is utput side *Add -LIM fr Lw Intermdulatin ptin. Optin nly available in 10, 20, 30 and 40 db and is nt available thrugh Express. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09 59

51 Fixed Caxial Attenuatrs Mdel 81 High Pwer Fixed Caxial Attenuatr dc t 10.0 GHz 500 Watts Cnductin/Cnvectin Cled Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Specificatins NOMINAL IMPEDANCE: FREQUENCY RANGE: 50 Ω dc t 10.0 GHz MAXIMUM DEVIATION OVER FREQUENCY (db): NOM ATTN (db) Deviatin dc GHz GHz 10, 20, 30, / -0 db dc POWER RATING (assuming unbstructed air flw and natural cnvectin arund unit): 500 watts average (unidirectinal) t 35 C ambient temperature, derated linearly t C. 5 kilwatt peak (5 μsec pulse width; 1.5% duty cycle). Maximum pwer int utput is 20 Watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t +125 C TEST DATA: Insertin Lss and Test data supplied at 0.05, 2.0, 4.0, 6.0, 8.0 and 10 GHz. Other test data can be prvided at additinal cst. CONNECTOR: Type N cnnectrs - mate nndestructively with MIL-C cnnectrs. Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel r silver plated brass cnnectrs with gld plated beryllium cpper r stainless steel N male cntacts. WEIGHT: Net 1.45 kg (3 lbs, 4 z) maximum 81 - XX - XX Mdel Attenuatin Value Cnnectr Optins - 1st Digit is input side - 2nd digit is utput side. Cnnectr Type DIM A N female 15.0 (0.59) N male 22.9 (0.90) 60 All dimensins are given in mm (inches) and are maximum, unless therwise specified. web: weinschel-sales@aerflex.cm Revisin Date: 1/28/09

52 Aerflex / Weinschel Fixed Caxial Attenuatrs Mdel 82 High Pwer Caxial Attenuatr dc t 3.0 GHz 1,000 Watts Type N Cnnectrs Quality cnnectrs with special high temperature supprt beads. Designed t meet envirnmental requirements f Specificatins FREQUENCY RANGE: dc t 3.0 GHz MAXIMUM DEVIATION OVER FREQUENCY (db): NOM ATTN (db) Deviatin dc GHz GHz 10, 20, 30, , -0.5 db POWER RATING (assuming unbstructed air flw and natural cnvectin arund unit): 1,000 watts average (unidirectinal) t 25 C ambient temperature, derated linearly t C. 10 kilwatt peak (5 μsec pulse width; 5% duty cycle). Maximum pwer int utput is 75 Watts average. POWER COEFFICIENT: < db/db/watt TEMPERATURE RANGE: -55 C t +125 C with pwer derating applied. TEST DATA: Insertin Lss and measurements perfrmed acrss frequency range. Test data supplied at additinal cst. CONNECTOR: Type N cnnectrs - mate nndestructively with MIL-C cnnectrs. Optins Type/Descriptin 3 Type N, Female 4 Type N, Male CONSTRUCTION: Black, finned aluminum bdy, stainless steel r silver plated brass cnnectrs with gld plated beryllium cpper r stainless steel N male cntacts. WEIGHT: Net 13 kg (28.7 lbs) maximum 82 - XX - XX dc Mdel Attenuatin Value RHS Cnnectr Optins - 1st Digit is input side - 2nd digit is utput side. Aerflex / Weinschel FEET ARE SPRING LOADED FOR SELF LEVELING AND ARE SHOWN FULLY EXTENDED AND CAN BE COMPRESSED UP TO 0.16 INCHES (4 PLCS) 1. All dimensins are given in mm (inches) and are maximum, unless therwise specified. 2. Unit available with RHS cmpliant materials, specify when rdering. Cnnectr Type DIM A DIM B N female 15.0 (0.59) 21.4 (0.84) N male 22.9 (0.90) 29.3 (1.15) web: weinschel-sales@aerflex.cm Revisin Date: 7/7/10 61

53 Fixed Caxial Attenuatrs Attenuatr Sets dc t 18.0/28.0 GHz Mdel AS-6 (Type N) Mdel AS-18 (Precisin Type N) Mdel AS-20 (3.5mm) Test Data: Test Data fr each attenuatr is prvided. Data furnished: AS-6 and AS-18, Insertin lss & prts 1 and 2 test data supplied at 0.05, 4.0, 8.0, 12.4 and 18.0 GHz and AS-20, Insertin lss & prts 1 and 2 test data supplied at 0.05, 4.0, 8.0, 12.4, 18.0 and 26.5 GHz. Wide Temperature Range: -55 C t 125 C. Full rated pwer t 25 C. Derated Linearity t C. Unifrm Phase Characteristics: Excellent unit-t-unit tracking and phase linearly with frequency. Rugged Cnstructin: Designed t meet all envirnmental requirements f High Repeatability Cnnectrs: - AS-6: Type N per MIL-STD AS-18: Precisin N per MIL-STD AS-20: Precisin 3.5mm Durable Strage Case. Specificatins Set Standard Nminal Frequency Average Cnnectr Maximum* Page Mdel Mdel Values Range Pwer Type N.** (db) (GHz) (W) AS-6 2 3, 6, 10, 20 dc-18 GHz 5 N AS , 3, 6, 10, 20, 30 dc-18 GHz 5 N AS , 6, 10, 20, 30 dc-28 GHz 2 3.5mm *Varies with frequency. **Refer t indicated page fr mre detailed attenuatr specificatins. STORAGE CASE DIMENSIONS: Mdel AS-6: 136.5mm (5-3/8 in) lng x 125.4mm (4-15/16 in) wide x 35.6mm (2-3/16 in) high Mdel AS-18: 215.9mm (8.5 in) lng x 273mm (10-3/4 in) wide x 63.5mm (2-1/2 in) high Mdel AS-20: 139.7mm (5-1/2 in) lng x 123.8mm (4-7/8 in) wide x 60.3mm (2-3/8 in) high 62 web: weinschel-sales@aerflex.cm Revisin Date: 1/18/10