MC14024B SEMICONDUCTOR TECHNICAL DATA

Size: px

Start display at page:

Download "MC14024B SEMICONDUCTOR TECHNICAL DATA"

Polly Perkins
6 years ago
Views:

1 SEMIONDUTO TEHNIAL DATA The M4024B is a 7 stage ripple counter with short propagation delays and high maximum clock rates. The eset input has standard noise immunity, however the lock input has increased noise immunity due to Hysteresis. The output of each counter stage is buffered. Diode Protection on All Inputs Output Traitio Occur on the Falling Edge of the lock Pulse Supply Voltage ange = 3.0 Vdc to 8 Vdc apable of Driving Two Low power TTL Loads or One Low power Schottky TTL Load Over the ated Temperature ange Pin for Pin eplacement for D4024B MAXIMUM ATINGS* (Voltages eferenced to ) Symbol Parameter Value Unit ÎÎ D Supply Voltage 0.5 to V Vin, VoutÎ Input or Output Voltage (D or Traient)ÎÎ 0.5 to V lin, loutî Input or Output urrent (D or Traient), ± per Pin Î ma PD Power Dissipation, per Package 500 Î mw Tstg Storage Temperature 65 to + 50 TL Lead Temperature (8 Second Soldering) 260 * Maximum atings are those values beyond which damage to the device may occur. Temperature Derating: Plastic P and D/DW Packages: 7.0 mw/ From 65 To 25 eramic L Packages: 2 mw/ From 0 To 25 LOK 2 ESET LOGI DIAGAM L SUFFIX EAMI ASE 632 ODEING INFOMATION M4XXXBP M4XXXBL M4XXXBD Plastic eramic SOI TA = 55 to 25 for all packages. LOK ESET PIN ASSIGNMENT P SUFFIX PLASTI ASE 646 D SUFFIX SOI ASE 75A N 2 N 3 N = PIN 4 = PIN 7 N = NO ONNETION = PIN 9 4 = PIN 6 5 = PIN 5 EV 3 /94 M4024B Motorola, Inc MOTOOLA MOS LOGI DATA

2 ELETIAL HAATEISTIS (Voltages eferenced to ) Î ÎÎ 25 haracteristic Symbol Vdc Min Max Min Typ # Max Min Max Unit Output Voltage 0 Level Î Vin = or 0 ÎÎ 0.05 ÎÎ ÎÎ Vdc 0.05 Î Vin = 0 or LevelÎ Î Vdc ÎÎ 4.95 Input Voltage 0 Level VIL Vdc (VO = 4.5 or 0.5 Vdc) (VO = 9.0 or.0 Vdc) ÎÎ Î (VO = 3.5 or.5 Vdc) 5 ÎÎ ÎÎ (VO = 0.5 or 4.5 Vdc) Level VIH ÎÎ (VO =.0 or 9.0 Vdc) Î (VO =.5 or 3.5 Vdc) ÎÎ ÎÎ Vdc 7.0 Output Drive urrent Î IOH madc ( = 2.5 Vdc) Source ÎÎ ( = 4.6 Vdc) ( = 9.5 Vdc) ÎÎ Î ( = 3.5 Vdc) ( = 0.4 Vdc) Sink IOL ÎÎ ( = 0.5 Vdc) ( =.5 Vdc) ÎÎ ÎÎ madc Input urrent ÎÎ Iin 5 ± 0. ± ± 0. ±.0 µadc Input apacitance Î in Î ÎÎ ÎÎ ÎÎ ÎÎ 7.5 pf (Vin = 0) uiescent urrent IDD ÎÎ Î (Per Package) 5 ÎÎ ÎÎ µadc Total Supply urrent** ÎÎ IT IT = (0.3 µa/khz) f + IDD µadc (Dynamic plus uiescent, ÎÎ IT = (0.60 µa/khz) f + IDD Per Package) (L = 50 pf on all outputs, all ÎÎ 5 IT = (.89 µa/khz) f + IDD buffers switching) #Data labelled Typ is not to be used for design purposes but is intended as an indication of the I s potential performance. ** The formulas given are for the typical characteristics only at 25. To calculate total supply current at loads other than 50 pf: IT(L) = IT(50 pf) + (L 50) Vfk where: IT is in µa (per package), L in pf, V = ( ) in volts, f in khz is input frequency, and k = This device contai protection circuitry to guard agait damage due to high static voltages or electric fields. However, precautio must be taken to avoid applicatio of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be cotrained to the range (Vin or Vout). Unused inputs must always be tied to an appropriate logic voltage level (e.g., either or ). Unused outputs must be left open. MOTOOLA MOS LOGI DATA M4024B

3 SWITHING HAATEISTIS* (L = 50 pf, TA = 25 ) ÎÎ haracteristic Symbol Min Typ # Max Unit ÎÎ Output ise and Fall Time, ÎÎ ÎÎ, = (.5 /pf) L , = (0.75 /pf) L ÎÎ 50 0, = (0.55 /pf) L ÎÎ Propagation Delay Time tplh, Î ÎÎ lock to tphl ÎÎ tplh, tphl = (.7 /pf) L ÎÎ tplh, tphl = (0.66 /pf) L + 7 ÎÎ tplh, tphl = (0.5 /pf) L ÎÎ lock to 7 tplh, tphl = (.7 /pf) L Î ÎÎ tplh, tphl = (0.66 /pf) L ÎÎ tplh, tphl = (0.5 /pf) L eset to ÎÎ n ÎÎ tplh, tphl = (.7 /pf) L tplh, tphl = (0.66 /pf) L + 27 tplh, tphl = (0.5 /pf) L ÎÎ lock Pulse Width twh ÎÎ eset Pulse Width twh ÎÎ ÎÎ eset emoval Time trem Î ÎÎ lock Input ise and Fall Time, Î.0 ÎÎ ÎÎ s 8.0 ms µs Input Pulse Frequency fcl MHz ÎÎ ÎÎ ÎÎ 5 ÎÎ * The formulas given are for the typical characteristics only at 25. #Data labelled Typ is not to be used for design purposes but is intended as an indication of the I s potential performance. TUTH TABLE lock eset State 0 0 No hange 0 All Outputs Low 0 No hange All Outputs Low 0 No hange All Outputs Low 0 Advance One ount All Outputs Low M4024B 2 MOTOOLA MOS LOGI DATA

4 = Vout = Vout n n IOH IOL OUNT n TO A LOGI LEVEL. EXTENAL POWE SUPPLY EXTENAL POWE SUPPLY Figure. Typical Output Source haracteristics Test ircuit Figure 2. Typical Output Sink haracteristics Test ircuit 500 µf ID 0.0 µf EAMI PULSE GENEATO f L L L L L L L Figure 3. Power Dissipation Test ircuit MOTOOLA MOS LOGI DATA M4024B 3

5 LOK () ESET (2) (2) 2 () 3 (9) 4 (6) 5 (5) 6 (4) 7 (3) twl twh trem tplh 90% % tplh2 t PHL tphl2 90% % tplh3 tphl3 tphl4 tplh4 t PLH5 tphl5 tphl6 t TLH t THL tplh6 90% % tplh7 tphl7 t TLH t THL Input t TLH and t THL = 20 t t2 t3 t4 t5 t 6 t7 V DD V OL V OH V OL V OH Figure 4. Functional Waveforms M4024B 4 MOTOOLA MOS LOGI DATA

6 OUTLINE DIMENSIONS A B L SUFFIX EAMI DIP PAKAGE ASE ISSUE Y L NOTES:. DIMENSIONING AND TOLEANING PE ANSI Y4.5M, ONTOLLING DIMENSION: INH. 3. DIMENSION L TO ENTE OF LEAD WHEN FOMED PAALLEL. 4. DIMENSION F MAY NAOW TO 0.76 (0.030) WHEE THE LEAD ENTES THE EAMI BODY. T SEATING PLANE F D 4 PL G 0.25 (0.0) M T A N S K J 4 PL M 0.25 (0.0) M T B S INHES MILLIMETES DIM MIN MAX MIN MAX A B D F G 0.0 BS 2.54 BS J K L BS 7.62 BS M N B P SUFFIX PLASTI DIP PAKAGE ASE ISSUE L NOTES:. LEADS WITHIN 0.3 (0.005) ADIUS OF TUE POSITION AT SEATING PLANE AT MAXIMUM MATEIAL ONDITION. 2. DIMENSION L TO ENTE OF LEADS WHEN FOMED PAALLEL. 3. DIMENSION B DOES NOT INLUDE MOLD FLASH. 4. OUNDED ONES OPTIONAL. A F H G D N SEATING PLANE K L M J INHES MILLIMETES DIM MIN MAX MIN MAX A B D F G 0.0 BS 2.54 BS H J K L BS 7.62 BS M 0 0 N MOTOOLA MOS LOGI DATA M4024B 5

7 OUTLINE DIMENSIONS A B P 7 PL D SUFFIX PLASTI SOI PAKAGE ASE 75A 03 ISSUE F 0.25 (0.0) M B M NOTES:. DIMENSIONING AND TOLEANING PE ANSI Y4.5M, ONTOLLING DIMENSION: MILLIMETE. 3. DIMENSIONS A AND B DO NOT INLUDE MOLD POTUSION. 4. MAXIMUM MOLD POTUSION 0.5 (0.006) PE SIDE. 5. DIMENSION D DOES NOT INLUDE DAMBA POTUSION. ALLOWABLE DAMBA POTUSION SHALL BE 0.27 (0.005) TOTAL IN EXESS OF THE D DIMENSION AT MAXIMUM MATEIAL ONDITION. T SEATING PLANE G D 4 PL K 0.25 (0.0) M T B S A S X 45 M J F MILLIMETES INHES DIM MIN MAX MIN MAX A B D F G.27 BS BS J K M P Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation coequential or incidental damages. Typical parameters which may be provided in Motorola data sheets and/or specificatio can and do vary in different applicatio and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. Motorola does not convey any licee under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicatio intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless agait all claims, costs, damages, and expees, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUOPE/Locatio Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi SPD JLD, 6F Seibu Butsuryu enter, P.O. Box 2092; Phoenix, Arizona or Tatsumi Koto Ku, Tokyo 35, Japan MFAX: MFAX0@ .sps.mot.com TOUHTONE ASIA/PAIFI: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, INTENET: NET.com 5 Ting Kok oad, Tai Po, N.T., Hong Kong M4024B 6 MOTOOLA MOS LOGI M4024B/D DATA

MC14017B SEMICONDUCTOR TECHNICAL DATA

MC14017B SEMICONDUCTOR TECHNICAL DATA SEIONUTO TEHNIAL ATA The 14017B is a five stage Johon decade counter with built in code converter. High speed operation and spike free outputs are obtained by use of a Johon decade counter design. The