Wall cladding. Impact edges/bumper rails. interior ATHLON. All the best qualities in one panel
|
|
- Tabitha Bathsheba Sutton
- 6 years ago
- Views:
Transcription
1 Wll cldding. Impct edges/bumper rils. Design interior ATHLON All the best qulities in one pnel
2 Contents Generl informtion 3 Product dt Tresp Athlon 4 Applictions nd delivery progrmme 5 Tresp Athlon 6 Wll cldding 7 Chrcteristics 7 Moisture regulting fixing system 8 Joints 9 Corner solutions 10 Fixing systems 11 Visible fixing with screws 1 Blind fixing with screws or inserts 15 Blind fixing with continuous integrted pnel brcket 19 Blind fixing with dhesive 5 Semi-blind fixing with joint profile or metl tongues 8 Applictions 31 Bthrooms/snitry units 31 Bumper rils 33 Bumper rils combined with Tresp Athlon round-cornered element 34 Tresp Athlon bumper rils combined with bnister 35 Fixing methods 36
3 Generl informtion. Tresp Athlon is high qulity pnel mteril from Tresp Interntionl BV specilly developed for durble interior fittings flexible nd functionl in wide rnge of rchitecturl pplictions techniclly of high qulity economicl ecologicl. 3
4 Product dt Tresp Athlon. 4 Mteril properties Tresp Athlon Properties Vlue Unit Stndrd Physicl properties Specific grvity ± kg/m 3 ASTM-D Weight Thickness 6 mm 8.5 kg/m Thickness 13 mm 18.5 kg/m Thickness 16 mm.5 kg/m Thickness 0 mm 8.0 kg/m Pnel tolernce Length & Width - 0.0/+5 mm Thickness ± 0.5 for 6,8,10 mm ± 0.6 for 13,16 mm ± 0.7 for 0 mm ± 0.8 for 5 mm Opticl properties Chnges when subjected to dry het (mximum temperture of 180 C) EN 438- (8) gloss 5 (= no chnges) colour 5 (= no chnges) crcking 5 (= no chnges) Mechnicl properties Modulus of elsticity N/mm DIN Tensile strength 70 N/mm DIN Flexurl strength 100 N/mm DIN 5345 Surfce impct resistnce 4 Index number EN 438- (11) Scrtch resistnce Plin colours, light 4 Index number EN 438- (14) Plin colours, drk 3 Index number EN 438- (14) Wer resistnce All plin colours 3 Index number EN 438- (6) Fntsy decors Index number EN 438- (6) Wter bsorption 1.0 % weight EN 438- (7) Dimensionl stbility.5 mm/m Therml properties Therml conductivity coefficciënt ± 0.3 W/mK DIN 561 Appliction temperture - constnt -40 to 130 C Chemicl properties See dtsheet chemicl properties Fire behviour Gret Britin Type FR: clss 0 BS 476 Prts 6-7 Fire clssifiction Type Stndrd: clss Building Regultions The Netherlnds Type FR: Klsse 1 NEN 6065 Brndklsse Type Stndrd: Klsse NEN 6065 Germny Typ FR: Klsse B1 DIN 410 Bustoffklsse Typ Stndrd: Klsse B DIN 410 Frnce mm Type FR: Clssement M1 NF P mm Type Stndrd: Clssement M3 NF P Belgium Type FR: Klsse A1 NBN S1-03 Type Stndrd: Klsse A NBN S1-03
5 Applictions nd delivery progrmme. Form nd compiltion Tresp Athlon is flt decortive pnel bsed on thermosetting resins, homogeneously reinforced with cellulose fibres nd mnufctured under high pressure nd temperture. Using specil techniques, the pnels hve n integrted, decortive surfce mde of melmine impregnted pper. Tresp Athlon complies with the Europen stndrd EN 438. Tresp Athlon is specilly developed for durble interior fittings. The pnel is resistnt to scrtches, wer, moisture nd to lrge degree resistnt to chemicls. Tresp Athlon is often used for: project furniture wll cldding in bthrooms nd tretment rooms clenrooms such s operting thetres, lbortories, production rooms for foodstuffs, phrmceuticls, cosmetics, electronic equipment etc. bumper rils chnging cubicles, lockers wll cldding nd prty wlls for showers nd snitry units lbortory furniture Tresp Athlon is often used in: offices hotels universities nd teching institutions sports nd recretion centres cmp sites food industry hospitls cre nd nursing centres public buildings The product progrmme Sizes: 3050 x 1530 mm 550 x 1860 mm Thicknesses: 6, 8, 10, 13, 16 nd 0 mm Colours: more thn 36 primry nd pstel plin colours 16 speckled decors (Futuriq) 1 fntsy decors (Imgiq: Nuges, Fibres, Crquelee) nd 6 wood decors (Nturiq). Surfce structures: Qurtz: surfce structure with flowing, even texture, recommended for verticl pplictions. Crystl mtt: very fine surfce structure with mtt gloss, recommended for horizontl pplictions. Types: Stndrd - blck core Fire resistnt (FR) - brown core. Tresp lso offers Athlon corner profiles for the perfect linkingup to Tresp Athlon flt pnels (with the sme colour nd surfce structure). They re vilble with double-sided colour nd Qurtz structure. Furthermore, unlimited single-sided corner solutions in vrious sizes nd rdii cn be mde with the process Postforming. Stndrd corner profile sizes: 1860 x 300 x 300, rdius 0 mm 3050 x 300 x 300, rdius 0 mm Stndrd corner profile thicknesses: 8, 10 nd 13 mm Further informtion We will be plesed to send you detiled delivery progrmme nd/or extensive colour documenttion. 5
6 Tresp Athlon. The excellent mechnicl nd surfce properties of Tresp Athlon mke this pnel idel for use s wll cldding in dmp rooms, or rooms which require intensive clening. Tresp Athlon is not dverrily ffected by moisture nd is not susceptible to wethering, mould or rot. Dirt cnnot cling to the non porous surfce nd the closed core, so the mteril is esy to clen nd disinfect - even using wek solutions. Incinertion in industril furnces (temp. > 70 C) will not relese hrmful, corrosive gses nd results in n energy recovery of pproximtely 18 GJ/1,000 kg of Tresp Athlon. The pnel mteril cn be swn, routered nd drilled with the usul tools for hrdwoods. There is no requirement to finish the edges becuse of the closed, impct-resistnt core. Tresp Athlon conforms to the requirements of the FDA (Food nd Drugs Administrtion) for use in the food industry. The pnel mteril cn come into direct contct with foodstuffs during preprtion nd preservtion without ny problems. According to DIN 51953, Tresp Athlon is clssed s n ntisttic mteril. This mkes the pnel idel for pplictions in res such s clen rooms, the opticl industry nd s computer furniture. Tresp is penetrted by X-rys nd is therefore often used in the medicl nd nursing sector. Tresp Athlon is esy to instll. It cn be fixed visibly, semiblind or blind with the invisible fixing offering high pull-out resistnce. The pnel mteril does not cuse corrosion of the fixings. It mybe necessry to fit supply nd wiring systems in the wll construction. These cn be conceled behind the pnel. 6 Tresp Athlon, in combintion with suitble insulting mterils, is well suited s dividing elements in rooms which require good noise nd het insultion nd high fire resistnce. Tresp Athlon (Crystl Mtt nd Qurtz) is highly resistnt to burning cigrettes. They do not dmge the surfce nd leve no permnent mrks. The fire behviour of both types of Tresp Athlon is comprble to tht of hrdwood. The pnel mteril does not melt, drip or explode nd retins its stbility for long time. The fire resistnt type (FR) hs been clssed by severl Europen test institutes in the best clss for fire behviour of orgnic mteril. In Frnce this type hs lso been tested ccording to the stndrds NFX nd NFX for emissions of toxic nd corrosive gses. The result of these tests is the F1 clssifiction, the most fvourble clss for orgnic building mteril.
7 WALL CLADDING Chrcteristics. Tresp Athlon is often fitted s so-clled suspended cldding element. This mens tht the mteril is ssembled on supporting subfrme. The pnel is fixed visibly with screws or invisibly with the help of n luminium construction or glue on wll or structure behind the pnel. This wll or structure cn consist of timber, steel or luminium verticl nd horizontl bttens, either unfinished or finished with for instnce plsterbord, or it my be solid brick or concrete wll. The most commonly used fixing method for Tresp Athlon pnels in interior pplictions is blind fixing. The drwings opposite give generl impression of the vrious fixing methods. A. Wll cldding on verticl nd horizontl bttens. A B Zichtbr Visible bevestigd fixing Blind bevestigd fixing B. Wll cldding on metl verticl nd horizontl bttens. C. Wll cldding on metl verticl nd horizontl bttens with plsterbord. C D. Wll cldding on solid wll. E. Instlltion cldding with self-supporting subfrme. 1. Tresp Athlon pnel 8 mm. Tresp Atlon pnel 6 or 8 mm 3. Aluminium uxiliry construction. 4. Verticl btten 5. Verticl timber bttens 6. Insulting mteril 7. Cbles 8. Solid wll 9. C section 10. Plsterbord 11. Box section 1. Adhesive system Zichtbr Visible bevestigd fixing D Blind fixing bevestigd E
8 Moisture regulting fixing system. Aprt from being used s wll cldding, Tresp Athlon is lso used for instlltion cldding, column cldding nd s bumper rils. Specil fixing systems for suh pplictions re shown in the relevnt drwings. The detils given re not specific, but they demonstrte the generl principle. The min detils in the following sections differentite between fully bck ventilted nd semi-seled wll cldding. The difference between the two is pprent in the verticl cross-sections. The difference in the horizontl cross-sections is simply whether or not the joints re seled with mstic. In the cse of dmp subfrmes such s new msonry, new plsterwork, dmp wlls mde of concrete, etc., extr ventiltion must be provided until the reltive moisture on both sides of the construction is equl. A. Fully bck ventilted wll cldding. The Fully bck ventilted wll cldding is distinguished by: - open floor nd ceiling connections - horizontl or verticl profiles mounted to provide spcing. B. Semi-seles wll cldding. The semi-seles wll cldding is distinguished by: - the interconnected open spce between the rer wll nd the spce bove the (system) ceiling. - the horizontl profiles mounted to provide spcing - the closed joints, e.g. ceiling nd floor connections. A B 8 A. Fully bck ventilted wll cldding. Verticl cross-section B. Semi-seles wll cldding. Verticl cross-section
9 Joints. In view of possible chnges in size s result of moisture nd temperture chnges, joints should be left free both for verticl nd horizontl connections in such wy tht the pnel mteril cn move by.5 mm/m 1 mximum. Thnks to the excellent workbility of the mteril, it is possible to precisely sel verticl nd horizontl joints without uxiliry profiles. For pnel thicknesses from 8 mm upwrds it is possible to mke joints in the form of rebted joint connections or s tongue nd groove connections. If the joints turn out to be too deep, then bcking which is ppropite for the seling mteril must first be pplied. For specific processing instructions, see the guidelines provided by the relevnt supplier. Horizontl joints Either tongue nd groove connections or rebted joint connections cn be used for horizontl joints. The joint must be mde in such wy tht the pnels cn move by.5 mm/m 1 mximum.the recess in the rebted joint must mesure t lest x the joint width. A Verticl joints The tongue nd groove connection cn be used for verticl joints. The pnel thickness left on ech side of the groove must be t lest.9 mm. If Tresp Athlon groove is used, the pnel thickness must be 10 mm. If n luminium groove is used, pnel thickness of 8 mm is sufficient. B C b Joint seling using mstic. When Tresp Athlon is used for interior pplictions where high stndrds of hygiene nd disinfection re required, wll constructions with irtight sels re often chosen. The joints re then seled with n elstic mstic. This seling mteril must be mould repellent (ISO 846) nd resistnt to disinfectnts, if it is used in the forementioned pplictions. Wht s more it is necessry for the dhesion between the seling mteril nd the pnel to withstnd drughts, dmp, dust nd dirt. It is recommended to use Tresp Athlon in combintion with silicone mstic or polyurethne. D E F 9 Importnt guidelines for pplying elstic seling mteril: The joint must be bsolutely clen, dry nd free of grese. If necessry, primer must be used to fcilitte dhesion. The seling mteril must on no ccount dhere to the reverse side (dhesion on three sides) becuse this cn cuse crcking. It is dvisble to use seprting film or polyethylene tongue. To ensure tht the seling mteril is not under excessive strin, the joint must be sufficiently wide nd the depth of the joint should not be greter thn the width of the joint. G A, C nd G: For dmp rooms B, D, E nd F: For clen rooms such s operting thetres. 8 mm b 15 mm
10 Corner solutions. Flt pnel When joining Tresp Athlon pnels in corner it is importnt to tke ccount of the movement of the pnel. To void tension in the joint it is dvisble to keep the leg length of the corner element s smll s possible (t most 400 mm). A R B From pnel thickness of 8 mm upwrds, prefbricted corner elements re vilble. Adhered connections must lwys be combined with mechnicl connection. A -component polyurethne glue cn be used to dhere Tresp Athlon prts together. The prts to be dhered must hve the sme grin direction (both cut from the length or from the width of the pnel). R 1 C D The recommended solution for impct-bsorbing pplictions such s bumper rils is n externl corner s shown in detil A. If the solution shown in detil F is used, the outer corner must be well fceted. R R R Postforming Using the modified Tresp Athlon pnel it is possible to mke lmost unlimited individul corner solutions in vrious sizes nd rdii (R>15 mm). Tresp Athlon corner profiles E F These re the idel solution for prticulrly difficult pplictions or where decortive effect is required on both sides. Corner elements re vilble in length of 3050 mm nd 1860 mm with n outer rdius of 0 mm nd leglength of 300 mm. G H 10 Tresp Athlon pnels cn lso be joined together in corners in vrious other wys: glued luminium or plstic corner profile glued luminium or plstic tongue tongue nd groove joint with support b A. Tresp Athlon corner profile, inner nd outer corner B. Subsequently shped inner corner CD. Subsequently shped outer corner EF. Compound outer corner GH. Compound inner corner 4 mm b 5 mm R 1 = 0 mm R 15 mm
11 FIXING SYSTEMS Generl guidelines Tresp is fitted to suitble subfrme with corrosion resistnts devices in such wy tht the pnels re not subjected to tension nd cnnot work loose s result. It is importnt when determining the subfrme to tke ccount of the following points: the lod-bering requirements mximum fixing distnces for the pnels the necessry ventiltion or moisture regulting provisions the unrestricted bility of the pnels to move the vilble pnel sizes the thickness of ny insulting lyer the nchoring options in the building (wll) construction legl requirements Fixing The following methods cn be used for fixing Tresp pnels. It is lso possible to vry or combine the methods. The drwings in this brochure illustrte the principles of the fixing systems, but do not indicte prticulr brnds. visible fixing with screws blind fixing with screws or inserts blind fixing with continuous integrted pnel brckets blind fixing with dhesive semi-blind fixing with metl tongues or joint profiles 11
12 Visible fixing with screws. Instlltion Visible fixing cn be used for pnels with thickness from 6 mm. Pnels with thickness of > 8 mm cn be fixed invisibly. b It is extremely importnt when fixing pnels to ensure tht they cn move freely nd evenly. The dimeter of pre-drilled holes must be t lest 3 mm greter thn the screw dimeter. Screws with countersunk heds must not be used, s they restrict the bility of the pnels to move. The screw must be properly centered in the drillholes. From pnel thickness of 8 mm upwrds, recessed screw cn be used, possibly covered with plstic cp flush with the fce of the pnel (digrm A). It is lso possible to use the quick ssembly screws designed for Tresp. The drillhole dimeter must then be 8 mm (digrm B). The screw must be perfectly centered. Generl remrks Joints: t lest 8 mm Pnel thickness: from 6 mm upwrds b b b Fixing nd edge distnces. horizontl nd verticl fixing distnce (see tble) b: edge distnce min. 0 mm mx. 10 x pnel thickness Mximum fixing distnces: Pnel fixing points 3 or more fixing points thickness in one direction in one direction 6 mm 450 mm 550 mm 8 mm 550 mm 700 mm 10 mm 700 mm 850 mm A B
13 Visible fixing with screws. Horizontl cross-section Corner Hoekdetil Connection Ansluiting to curtin n kozijn wll A. Detils for dry nd dmp rooms 7 B. Detils for clen rooms Tresp Athlon. Plstic cp 3. Cvity wll fixing 4. Spcer 3 mm 5. Plsterbord 6. [ -profile 7. Insulting mteril 8. Tresp curve 9. Mstic joint
14 14
15 Blind fixing with screws or inserts. Instlltion Tresp Athlon pnels with thickness of > 8 mm cn be fixed invisibly. This is often done using thred-cutting screws, inserts nd bolts in pre-drilled hole. It is best to pre-drill using depth stop so tht residul thickness of t lest mm remins on the visible side of the pnel. Instlltion using pnel brckets nd horizontl supports b b There re vrious systems for invisibly fixing Tresp Athlon pnels. Ech one is bsed on the principle tht the pnel must be ble to move in reltion to the subfrme. These systems consist of brckets or continuous profiles fixed to the reverse side of the pnel which engge with horizontl bttens mounted on the wll. The dvntge of these systems is tht the pnels cn be quickly nd esily dismounted, which is importnt, for exmple, when supply nd wiring systems re extended/renewed. b b b b b b Generl remrks Joints t lest 8 mm Pnel thickness from 8 mm upwrds Length of leg of corner pnels mximum 300 mm, otherwise fixing point must be provided ner the corner of the element. Fixing nd edge distnces o = pnel brcket fixing = horizontl fixing distnce (see tble) b = edge distnce: Mximum fixing distnces: Pnel fixing points 3 or more fixing points thickness in one direction in one direction 8 mm 550 mm 700 mm 10 mm 700 mm 850 mm 13 mm 850 mm 1000 mm 15 Fixing detils Fixing mens*: insert thred-cutting screw tension-free insert Anchoring depth: pnel thickness - 3 mm Remining pnel thickness: t lest mm * See lso chpter Fixing mens
16 Blind fixing with screws or inserts. Horizontl cross-section A. Detils for dry nd dmp rooms B. Detils for clen rooms Tresp Athlon 8 mm. Pnel brcket 3. Horizontl support profile 4. Spcer 3 mm 5. Joint 8 mm 6. Aluminium corner profile 7. Tresp Athlon corner profile 8 mm
17 Blind fixing with screws or inserts. Verticl cross-section 8 7 > + 8 mm Tresp Athlon pnel 8 mm. Pnel brcket 3. Horizontl support profile 4. Spcer next to the fixing of the horizontl support profile 5. Lower horizontl btten 6. Plster lyer 7. Plsterbord 8. Mstic joint 9. Moisture repellent lyer 10. Floor finish 11. Rubber profile 1. Tiled floor 13. Edge of bth
18 18
19 Blind fixing with continuous integrted pnel brcket. The continuous pnel brcket is integrted in the Tresp Athlon pnel by mens of milling. This results in n idel mechnicl connection which optimlly preserves the pnel properties. The fixing system hs number of importnt dvntges: very esy nd quick to instll the continuous pnel brcket is integrted in the Tresp Athlon pnel by mens of milling light construction, so thin pnel is possible Mximum fixing intervls (in mm) fixing points in one direction 3 or more fixing points in one direction Pnel thickness (in mm) b c c Generl remrks Joints: t lest 8 mm Pnel thickness: from 8 mm upwrds c Fixing nd edge distnces = horizontl fixing distnces b = edge distnce: 7 mm c = verticl fixing distnce: 600 mm Milling c b The milling in the rer side of the Tresp Athlon pnel is mde with specil milling tool. Verticl support profiles must be positioned exctly. NOTE: the blind fixing with continuous integrted pnel brcket is not suited for rooms with constnt high reltive humidity ( 90%) or wet ppliction. 19
20 Blind fixing with continuous integrted pnel brcket. Horizontl cross-section 9 A. Detils for dry nd dmp rooms 1 3 B. Detils for clen rooms Tresp Athlon pnel 8 mm. Integrted luminium pnel brcket 3. Verticl support profile 4. Mstic joint with plstic profile 5. Supporting rer wll 6. Mstic joint - tongue nd groove connection 7. Tresp Athlon brcket profile 8. Plstic profile 9. Glss 8
21 Blind fixing with continuous integrted pnel brcket. Verticl cross-section A B C D A. Detils for dry nd dmp rooms B. Detils for operting thetres C+D. Detils for clen rooms 1. Tresp Athlon pnel 8mm. Integrted pnel brcket 3. Verticl support brcket 4. System ceiling 5. Mstic joint 6. Plstic profile
22 Blind fixing with continuous integrted pnel brcket. Verticl cross-section 1. Tresp Athlon pnel 8 mm. Glss 3. Integrted pnel brcket 4. Verticl support profile 1 3 4
23 3
24 4
25 Blind fixing with dhesive. Principl detils on fixing using glue The qulity of n dhesive connection is minly determined by the circumstnces under which it ws mde. Dmp, cold nd/or dusty conditions cn hve negtive effect on the qulity. It is possible to dhere Tresp Athlon pnels to timber or metl subfrme whereby. the mximum permitted pnel sizes should not be exceeded so tht the pnels cn move without restriction the dhesive beds re pplied in verticl direction the instructions for the Tresp-recommended dhesive systems must be followed. y Generl remrks Joints t most 8 mm Pnel thickness from 6 mm upwrds Pnel size: mx lenght 550 mm Fixing nd edge distnces = horizontl fixing distnce (see tble) b = pnel width y = pnel height Mximum fixing distnces: Pnel dhesive beds more thn dhesive beds thickness per pnel per pnel 6 mm 450 mm 550 mm 8 mm 600 mm 650 mm 10mm 650 mm 650 mm Timber verticl bttens, lwys plned, minimum sizes: end bttens: 45 x 8 mm centre bttens: 55 x 8 mm centre bttens next to joint: 85 x 8 mm y 5 Metl strips, mimimum sizes: end strip: 45 x mm centre strip: 55 x mm centre strip next to joint: 85 x mm x
26 Blind fixing with dhesive. Horizontl cross-section A. Detils for dry nd dmp rooms 6 6 B. Detils for clen rooms 7 1. Tresp Athlon. Elstic dhesive 3. Tpe 3 mm 4. Verticl lth 5. Filling 6. Mstic 7. Tresp Athlon corner profile
27 Blind fixing with dhesive. Verticl cross-section Tresp Athlon. Glue 3. Verticl luminium profile 3 mm 4. Glss 5. Suspension system for ceiling 6. Plstic profile 7. Edge of bth
28 Semi-blind fixing with joint profile or metl tongues. Instlltion Tresp Athlon, from pnel thickness of 8 mm upwrds, cn be fixed semi-blind with the help of n luminium joint profile in combintion with profile on which the pnel is plced nd supported. The pnel is fixed by screwing the joint profile onto the subfrme. From pnel thickness of 13 mm, the joint profile cn be covered by Tresp Athlon tongue with thickness of 3 mm. Other wys of seling the joint profile re by using rubber profile or PVC profile. Generl remrks Joints: screw hed dimeter + 5 mm Pnel thickness from 8 mm c c c Fixing nd edge distnces = pnel spn (see tble) c= verticl fixing distnce in tongue: mximum 500 mm c Mximum pnel spn (in mm) Pnel spn Fixing detils Pnel thickness (in mm) Groove: t lest. x 15 mm, remining pnel edge thickness in ech cse.9 mm Metl tongue: x 30 mm x pnel length. Timber btten: minimum 35 x 90 mm Screws should be centered nd not overtightened in order to void restricting the movement of the pnel. 8
29 Semi-blind fixing with joint profile or metl tongues. Horizontl cross-section 1 3 A. Detils for dry nd dmp rooms B. Detils for clen rooms Tresp Athlon pnel 8 mm. Metl tongue 3. Filling piece 4. Aluminium Ω-profile
30 Semi-blind fixing with joint profile or metl tongues. Verticl cross-section Tresp Athlon pnel 8 mm. Metl tongue 3. Filling piece 4. U profile 5. Ω-profile 6. -profile
31 Applictions. Bthrooms/snitry units Tresp Athlon is well suited to newly built nd refurbished bthrooms nd snitry units. The esy processing nd fixing of the pnels men tht there is wide scope for different designs, uses nd pplictions. Due to the high rigidity nd impct resistnce of the pnel mteril, it is possible to work with reltively smll wll thicknesses of 10 to 16 mm. Height of doors must be cut from length nd not from width of pnel. Doors must be hung with min. of 3 hinges. From pnel thickness of 8 mm upwrds, Tresp Athlon cn be fixed invisibly to chieve completely smooth finish for n estheticlly plesing wll cldding. 31
32 3
33 Bumper rils. Generl Bumper rils nd pnelling usully consist of nrrow strips of wll cldding. The fixing of these nd the guidelines tht pply to this re no different from those described bove for wll cldding. Ventiltion Ventiltion The idel sitution is to leve open spce t the bottom, between the bord nd the wll. If this is not possible, we recommend witing (for pproximtely month) before seling the upper nd lower edge of the bumper ril. This is bsolutely necessry if fixing is done onto new structure; this hs to dry first. After this period, the upper nd lower edge cn be seled with plstic profile or with mstic. Corner solutions Corner solutions cn be implemented with post-forming elements, corner profiles or prefbricted elements. Joints The solutions for joints cn be implemented s shown in detiled digrms A, B, C nd D. Corner solutions Joints R R 1 33 A B R R R C b D b
34 Bumper rils combined with Tresp Athlon round-cornered element Tresp Athlon 8 mm. Supporting plte 3. Horizontl support profile 4. Rubber profile 5. Tresp Athlon round-cornered element 5 34
35 Tresp Athlon bumper rils combined with bnister. 35
36 Fixing methods. Visible fixing 1. Stinless steel quick ssembly screw for Tresp for pnel thickness of 6 mm to 10 mm Mteril: stinless steel A-170 or stinless steel A4 Dimeter: 4.8 mm Length: t lest 36 mm Hed dimeter: 1 mm Hed height:.5 mm Hole dimeter: 8 mm In ll Tresp Meteon colours If other screws re used, minimum dimeter of 4 mm nd length of 35 mm re required. Snelmontgeschroef Quick ssembly screw voor Tresp for Tresp Cpring Skiffy Cp Skiffy. Skiffy Cp for Tresp from 8 mm upwrds Mteril: nylon Colour: vrious colours for combintion with Tresp colours Dimeter: 1 mm (inner dimeter 10 mm) Height: 5 mm 36
37 Fixing methods. Blind fixing: 1. Fischer PA 4 M6 insert for pnel thickness of 8 mm nd upwrds Mteril: insert: brss screw: stinless steel AZ-170 or stinless steel A4 Dimeter: insert: 8 mm screw: M6 Length: pnel thickness 8: 5.5 mm pnel thickness 10: 7.5 mm pnel thickness 13: 10.5 mm Hole dimeter: 8 mm Hole depth: specil drill with depth stop Insert eidplug. Thred cutting screw for pnel thickness of 8 mm upwrds Type: EJOT-PT-S60 Mteril: stinless steel AZ-1709 or stinless steel A4 Dimeter: 6 mm Hole depth: specil drill with depth guide Ejot screw length: Thred dsnijdend cutting screw Thickness Ejot type Pnel Brcket Wsher DURO-PT-S60 Screw-in-drilled thickness stinless steel A4 depth depth ø * S60 x 9, S60 x 9, S60 x 9, S60 x 11, S60 x 11, ** S60 x 14, * mm wsher ** no stndrd specil drill vilble 3. Stinless steel tension free insert for pnel thickness of 8 mm upwrds Type: Keil Hinterschnittdübel M6 Mteril: stinless steel A4 Hole depth. pnel thickness 8: 5 mm pnel thickness 10: 7 mm pnel thickness 13: 10 mm Hole dimeter: 7 mm / 9 mm To be fitted with specil drill which is supplied with this type of nchoring device. Tension nningsloze free plug insert 37
38 Notes. 38
39 39
40 R E P L Y C A R D F O R O T H E R C O U N T R I E S R E P L Y C A R D F O R T H E U N I T E D K I N G D O M VISIT OUR NEW WEBSITE Qulity. Tresp Interntionl BV Four perfect product lines ISO 9001 Tresp Interntionl BV specilizes in high qulity pnel mteril for fçde cldding nd interior use. Tresp hs both the expertise nd the mens to develop products for specific segments of the mrket. Tresp is continully looking for wys to protect the environment even more effectively. Production of the fçde cldding mteril Tresp Meteon is bsed on unique, ptented techniques, which gurntee excellent wether resistnce nd colourfstness. Tresp Athlon, which offers you outstnding moisture resistnce long with scrtch nd wer resistnce, is prticulrly suitble for interior use. Tresp Virtuon is estheticlly plesing nd the perfect product for interior pplictions where durbility, hygiene, clenbility re required. And Tresp TopLb PLUS, highly resistnt to chemicls nd designed for use s lbortory worktops, completes the product progrmme. Tresp gurntees qulity of both products nd services. We offer our customers optiml technicl support s well s strightforwrd documenttion. Proof of this pproch is the wrd of the ISO 9001 certificte. Whtever your requirements, Tresp offers full support service. Plese contct us for further informtion. Tresp UK Ltd Grosvenor House Hollinswood Rod Centrl Prk, Telford TF 9TW Tel.: 44 (0) Fx: 44 (0) Info@tresp.co.uk Tresp Interntionl BV Postbus 110, 6000 AC Weert Wetering 0, 600 SM Weert The Netherlnds Verkoop Nederlnd Tel.: 31 (0) Fx: 31 (0) infonederlnd@tresp.com Export Deprtment Europe/Middle Est Asi/Pcific Tel.: 31 (0) / 39 / 578 Fx: 31 (0) infoexport@tresp.com Tresp Deutschlnd GmbH Richmodstrsse Köln Telefon: Telefx: infodeutschlnd@tresp.com Tresp Belgium Bvb/Sprl H. vn Veldekesingel 150 B Hsselt Tel.: Fx: infobelgium@tresp.com Tresp Frnce 18 rue Chrtrn 900 Neuilly sur Seine Tel.: 33 (0) Fx: 33 (0) infofrnce@tresp.com Tresp North Americ Ltd. 167 Crosthwite Circle Powy, CA 9064 Tel.: (1) TRESPA Fx: (1) info@trespnorthmeric.com Tresp Jpn Ltd. Tornomon Toyo Building 6F 4- Tornomon, 1-chome Minto-ku, Tokyo 105 Tel.: 81 (0) Fx: 81 (0) All the best qulities in one pnel Typiclly Tresp. Registered trdemrks Tresp, Meteon, Athlon, Toplb, Virtuon, Volkern, Ioniq nd Inspirtions re registered trdemrks of Tresp Interntionl BV. Responsibility All informtion is bsed on our current stte of knowledge. It is intended s informtion concerning our products nd their ppliction possibilities, nd is therefore not intended s ny form of gurntee with regrd to ny specific product chrcteristic. Colours The colours in this document re printed, nd therefore, my vry slightly from the originl Tresp pnel colours with respect to gloss, colour shdes nd surfce texture. Originl smples re vilble on request. Copyrights All rights reserved. No prt of this publiction my be reproduced, stored in retrievl system, or mde public, in ny form or by ny mens, either grphic, electronic or mechnicl, including photocopying, recording or otherwise, without the prior written permission of Tresp Interntionl BV. *U004* U004 / 0801
Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
More informationRoller chains. Roller chains
re chrcterised by n bove-verge service life due to excellent wer resistnce, high consistency, mtchless precision nd considerbly higher breking strength nd ftigue strength thn required by DIN/ ISO stndrd.
More informationRectangular type APS-10 to 15 Series
Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationInstallation guidelines Athlon furniture
TRESP Installation guidelines thlon furniture Trespa thlon Trespa thlon is a flat panel based on thermosetting resins, homogeneously reinforced with cellulose fibres and manufactured under high pressure
More informationFitting & User Instructions
Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising
More informationInnovative plate solutions for flexographic printing. nyloflex printing plates
Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationArray chip resistors size ARC241/ARC242 ARV241/ARV242
Arry chip resistors FEATURES 4 0603 sized resistors in one 1206-sized pckge Reduced reel exchnge time Low ssembly costs Reduced PCB re Reduced size of finl equipment Higher component nd equipment relibility.
More informationPB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars
PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationCanopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationTUR DOORS SHOWER DOORS
TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ
More informationGENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES
GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING
More informationMAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES
MAXIMUM FLOWS IN FUZZY NETWORKS WITH FUNNEL-SHAPED NODES Romn V. Tyshchuk Informtion Systems Deprtment, AMI corportion, Donetsk, Ukrine E-mil: rt_science@hotmil.com 1 INTRODUCTION During the considertion
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationJUMO Wtrans B Programmable Head Transmitter with Radio Transmission
Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationModWood New Zealand Technical and Installation Guide
PTO Pge 1 ModWood New Zelnd Technicl nd Instlltion Guide These guidelines should be red in conjunction with the New Zelnd Building Code (NZBC). Cluses tht pply to open, sltted decking nd blcony construction
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationThe Discussion of this exercise covers the following points:
Exercise 4 Bttery Chrging Methods EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the different chrging methods nd chrge-control techniques commonly used when chrging Ni-MI
More informationMATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR
MATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR INSTALLATION PARTS LIST MOWV MOWP MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454
More informationLarge Commercial Trunking
Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................
More informationET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION
EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE
More informationARK CHEVRON INSTALLATION GUIDE
ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationIPA FITTINGS FOR REHAU NORDIC
IP FITTINGS FOR REHU NORDIC DESIGN PLUS 2017 /S J. PETERSENS BESLGFBRIK JCOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45) 98 35 15 00 3 FITTINGS FOR REHU NORDIC DESIGN PLUS Table of contents PGE REHU Nordic
More informationLEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts
More informationCABLE MANAGEMENT. Parts List
CABLE MANAGEMENT Prts List CONTENTS PARTS LIST 1 Dt Trunking 03 1.1 COMPACT dt 140x50mm 04 1.2 PROFILA dt 180x65mm 07 1.3 Antimicroil Trunking - COMPACT Dt 11 1.4 Antimicroil Trunking - PROFILA Dt, 13
More informationMulti-Point Astragal Prehanger Installation Instructions
Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter
More informationExample. Check that the Jacobian of the transformation to spherical coordinates is
lss, given on Feb 3, 2, for Mth 3, Winter 2 Recll tht the fctor which ppers in chnge of vrible formul when integrting is the Jcobin, which is the determinnt of mtrix of first order prtil derivtives. Exmple.
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge
More informationDIN ANSI Shark Line Material specific application taps. New products 2017
DIN ANSI Shrk Line Mteril specific ppliction tps New products 2017 SHARK LINE SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security.
More information* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP
* MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"
More informationExercise 1-1. The Sine Wave EXERCISE OBJECTIVE DISCUSSION OUTLINE. Relationship between a rotating phasor and a sine wave DISCUSSION
Exercise 1-1 The Sine Wve EXERCISE OBJECTIVE When you hve completed this exercise, you will be fmilir with the notion of sine wve nd how it cn be expressed s phsor rotting round the center of circle. You
More informationA Development of Earthing-Resistance-Estimation Instrument
A Development of Erthing-Resistnce-Estimtion Instrument HITOSHI KIJIMA Abstrct: - Whenever erth construction work is done, the implnted number nd depth of electrodes hve to be estimted in order to obtin
More informationSteel Stud Systems 1800 STUDCO. Studco Stud Fits positively into track. External Infill Framing Between concrete and steel structures
Steel Stud Systems Studco Stud Fits positively into trck Externl Infill Frming Between concrete nd steel structures 32 Service Holes Bell-mouthed service holes t 500mm centres do not require grommets for
More informationModule 9. DC Machines. Version 2 EE IIT, Kharagpur
Module 9 DC Mchines Version EE IIT, Khrgpur esson 40 osses, Efficiency nd Testing of D.C. Mchines Version EE IIT, Khrgpur Contents 40 osses, efficiency nd testing of D.C. mchines (esson-40) 4 40.1 Gols
More informationHarmer Roof Drainage The Modulock Raised Deck Support Ranges
Modulock Rised Deck Supports - Introduction Hrmer Roof Dringe The Modulock Rised Deck Support Rnges Fully engineered, verstile, rised deck product rnges, Modulock Pedestl nd Modulock Uni-Ring, re idel
More informationAPPLICATION MANUAL. application manual >> ARMA-CHEK R. application manual
APPLICATION MANUAL R ppliction mnul >> ARMA-CHEK R ppliction mnul R R APPLICATION MANUAL 1 GENERAL 3» Working with Arm-Chek R 3» Tools for instlling Arm-Chek R 3» Correct use of Armflex dhesive 4» Applying
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More information''Violet'' drill series.
0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More information001CK CK0012 FR-001CK0013 FR EN English
AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion
More informationUltrasonic Level Measurement DU 60 Z and DU 61 Z Sensors
Technicl Informtion TI 9F//en Ultrsonic Level Mesurement DU 6 Z nd DU 6 Z Sensors Modulr design, corrosion-resistnt Approved for explosion hzrdous res DU 6 Z Mesuring rnge pprox. m DU 6 Z Mesuring rnge
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationSAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use
w w w. s m p l i n g. c o m Lbel Solutions 2017 Lbels for Production nd use SYSTEMS Which type lbel is right for me? Smpling Systems fer two types stndrd lbel bcking: Ultr Ahesive Lbels PhrmLbels 1. Ultr
More informationMEASURE THE CHARACTERISTIC CURVES RELEVANT TO AN NPN TRANSISTOR
Electricity Electronics Bipolr Trnsistors MEASURE THE HARATERISTI URVES RELEVANT TO AN NPN TRANSISTOR Mesure the input chrcteristic, i.e. the bse current IB s function of the bse emitter voltge UBE. Mesure
More informationIPA FITTINGS FOR REHAU NORDIC DESIGN A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR REHU NORDIC DESIGN /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ, DK-240 NIE TEL: (+45) 8 35 15 00 3 FITTINGS FOR REHU NORDIC DESIGN Table of contents Profile - REHU Nordic Design 4 PGE FITTINGS
More informationShip Cable Trays and Ladders. Ship Cable Trays System Height: H15 mm Width: mm 2 types of perforations
Ship Cble Trys nd dders Ship Cble Trys System Height: H mm : 7-0 mm 2 types of perfortions Ship Cble dders System Height: H nd H mm : 00-000 mm 2 types of rungs Exmples of Components of Cble dder System
More informationFrami transport hook Art. n models onward
999281902-02/2015 en-g The Formwork Experts. Frmi trnsport hook rt. n 588494000 2009 models onwrd Originl Operting Instructions Plese retin for future reference Originl Operting Instructions Frmi trnsport
More informationAS INDIVIDUAL AS YOUR LIFESTYLE IN THE BATHROOM.
AS INDIVIDUAL AS YOUR LIFESTYLE IN THE BATHROOM. THE PHILOSOPHY, THAT GUIDES US COMES TO LIGHT IN EVERYTHING WE DO. QUALITY WITHOUT COMPROMISE HANSA supplies the best qulity in the mrket: A commitment
More informationHow to remove BRNS/BRFS series from a PWB
Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive
More informationAbrasives, Additives and Compound. for processing in vibratory finishing equipment. Consumables
Deburring - Rounding - Grinding - Smoothing - Polishing Abrsives, Additives nd Compound for processing in vibrtory finishing equipment Cermic (KE)- nd plstic bonded (KS) medi re defined by their shpe,
More informationConnection Technology
Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *
More informationABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC
User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...
More informationCHAPTER 2 LITERATURE STUDY
CHAPTER LITERATURE STUDY. Introduction Multipliction involves two bsic opertions: the genertion of the prtil products nd their ccumultion. Therefore, there re two possible wys to speed up the multipliction:
More informationThree-Phase Synchronous Machines The synchronous machine can be used to operate as: 1. Synchronous motors 2. Synchronous generators (Alternator)
Three-Phse Synchronous Mchines The synchronous mchine cn be used to operte s: 1. Synchronous motors 2. Synchronous genertors (Alterntor) Synchronous genertor is lso referred to s lterntor since it genertes
More information670 Freestyle/Style Door with In-Line Panel
M 670 Freestyle/Style oor with In-Line Pnel Style Series Option Metl HK87 Slide MGNETIC PULL HNLE KIT with Mgnet Vinyl 083 JM E 989 MGNETIC OOR STOP N H900 PN HE SCREW C (CUH or MG) 781 HEER 716 HEER /
More informationIPA FITTINGS FOR ALUPLAST NORD-LINE A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR LUPLST NORD-LINE /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ 9, DK-9240 NIE TEL: (+4) 98 3 1 00 3 FITTINGS FOR LUPLST NORD-LINE Table of Contents Profile - luplast Nord-Line 4 FITTINGS IP
More informationSeries Door with In-Line Panel (GIH / AHD)
600 7000 Series oor with In-Line Pnel (GIH / H) H900 P H 083 JM C 781 HR 716 HR / SILL ISRT H900 P H F H170 MGTIC STRIP H900 P H 083 JM H5195 STTIG LOCK VRTICL VIYL GLZIG X Y Z HORIZOTL VIYL GLZIG FRM
More informationDiscontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)
ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers Fll 2009 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More informationGeneral Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House
Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =
More informationUniversity of North Carolina-Charlotte Department of Electrical and Computer Engineering ECGR 4143/5195 Electrical Machinery Fall 2009
Problem 1: Using DC Mchine University o North Crolin-Chrlotte Deprtment o Electricl nd Computer Engineering ECGR 4143/5195 Electricl Mchinery Fll 2009 Problem Set 4 Due: Thursdy October 8 Suggested Reding:
More informationOPERATING INSTRUCTION
-2 AUTOMATIC POLARIMETER OPERATING INSTRUCTION Plese red through these operting instruction before using MRC.VER.01-. CONTENTS I. APPLICATIONS.1 II. III. IV. PERFORMANCE 1 CONSTRUCTION AND PRINCIPLE 2
More informationThis is a repository copy of Effect of power state on absorption cross section of personal computer components.
This is repository copy of Effect of power stte on bsorption cross section of personl computer components. White Rose Reserch Online URL for this pper: http://eprints.whiterose.c.uk/10547/ Version: Accepted
More informationPower rating at 80 C watts R0005 ohms R0006 to R01. R001 to R01 Power. to R015. (mω) 1 0.2, 0.25, 0.3, 0.
Resistors Metl Strip Current Sense Resistors Surfce Mount Resistors Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Resistnce R000 (m ) to R0 (m ) Metl UR Robust
More informationGeometric quantities for polar curves
Roerto s Notes on Integrl Clculus Chpter 5: Bsic pplictions of integrtion Section 10 Geometric quntities for polr curves Wht you need to know lredy: How to use integrls to compute res nd lengths of regions
More informationSafety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
More informationExperiment 3: Non-Ideal Operational Amplifiers
Experiment 3: Non-Idel Opertionl Amplifiers 9/11/06 Equivlent Circuits The bsic ssumptions for n idel opertionl mplifier re n infinite differentil gin ( d ), n infinite input resistnce (R i ), zero output
More information2N6071A/B Series. Sensitive Gate Triacs. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V
Preferred Device Sensitive Gte Trics Silicon Bidirectionl Thyristors Designed primrily for full-wve AC control pplictions, such s light dimmers, motor controls, heting controls nd power supplies; or wherever
More information* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS
More informationSeven Sisters. Visit for video tutorials
Seven Sisters This imge is from www.quiltstudy.org. Plese visit this website for more informtion on Seven Sisters quilt ptterns. Visit www.blocloc.com for video tutorils 1 The Seven Sisters design cn be
More informationMAYWOOD. Hospitality & ConferenCe tables FURNITURE CORP. GSA Approved! Contract #GS-28F-0050W. Established 1918
MAYWOOD FURNITURE CORP. Mnufctured in the U.S.A. Estblished 1918 Hospitlity & ConferenCe tbles www.mywood.com GSA Approved! Contrct #GS-28F-0050W bout us Circ 1930 Mywood Furniture Corportion ws estblished
More informationControls. Solid-State Switching Devices. Reference Manual April Low-Voltage Controls and Distribution
Controls Solid-Stte Switching Devices Reference Mnul April 2009 Low-Voltge Controls nd Distribution Controls Solid-Stte Switching Devices 4 Introduction Solid-Stte Switching Devices 5 Generl dt Solid-Stte
More informationTOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE
TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series
More informationCHAPTER 3 AMPLIFIER DESIGN TECHNIQUES
CHAPTER 3 AMPLIFIER DEIGN TECHNIQUE 3.0 Introduction olid-stte microwve mplifiers ply n importnt role in communiction where it hs different pplictions, including low noise, high gin, nd high power mplifiers.
More informationLecture 20. Intro to line integrals. Dan Nichols MATH 233, Spring 2018 University of Massachusetts.
Lecture 2 Intro to line integrls Dn Nichols nichols@mth.umss.edu MATH 233, Spring 218 University of Msschusetts April 12, 218 (2) onservtive vector fields We wnt to determine if F P (x, y), Q(x, y) is
More informationJoanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office
. TECHNICA MEMOANDM To Cc repred By Endorsed By NZTA Network Mngement Consultnts nd Contrctors NZTA egionl Opertions Mngers nd Are Mngers Dve Btes, Opertions Mnger, NZTA Ntionl Office Jonn Towler, oding
More informationIPA FITTINGS FOR VEKA DANLINE 70 A/S J. PETERSENS BESLAGFABRIK JACOB PETERSENSVEJ 9, DK-9240 NIBE TEL: (+45)
IP FITTINGS FOR VEK DNLINE 70 2012 /S J. PETERSENS ESLGFRIK JCO PETERSENSVEJ 9, DK-9240 NIE TEL: (+4) 98 3 1 00 3 FITTINGS FOR VEK DNLINE 70 Table of Contents PGE Profile - VEK Danline 70 4 Suggestion
More informationMETHOD OF LOCATION USING SIGNALS OF UNKNOWN ORIGIN. Inventor: Brian L. Baskin
METHOD OF LOCATION USING SIGNALS OF UNKNOWN ORIGIN Inventor: Brin L. Bskin 1 ABSTRACT The present invention encompsses method of loction comprising: using plurlity of signl trnsceivers to receive one or
More informationSection 16.3 Double Integrals over General Regions
Section 6.3 Double Integrls over Generl egions Not ever region is rectngle In the lst two sections we considered the problem of integrting function of two vribles over rectngle. This sitution however is
More informationOn/off valves with spool position monitoring
On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,
More information1, 1.5, 2, 2.5, , 0.75, 1, 1.5, , 3, , 4.5, 5, 5.5, , 4.5, 0.5, 5, , , 6.
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Resistors Element UR Series UR Series Current Metl Resistor Element Resistnce
More informationEnhanced performance compression solutions
Enhnced performnce compression solutions Fittings Introduction Pegler Yorkshire hs upgrded the Kuterlite K900 rnge to Kuterlite K900-PRO As prt of our continuous improvement nd development progrmme we
More informationProducts no longer available
echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck
More informationSynchronous Machine Parameter Measurement
Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions
More informationIonizer. Series IZS31. RoHS
Ionizer Series IZS3 3 types of the sensors re vilble. Autoblnce sensor [High-precision type] Adjusts ion blnce ner the workpiece to reduce ny disturbnce interference! Autoblnce sensor [Body-mounting type]
More informationCrime Scene Documentation. Crime Scene Documentation. Taking the C.S. What should my notes include. Note Taking 9/26/2013
Crime Scene Documenttion Crime Scene Documenttion Most importnt step in C.S. processing Purpose: permnently record the condition of C.S. & physicl evidence Time consuming Documenter must be orgnized nd
More information(CATALYST GROUP) B"sic Electric"l Engineering
(CATALYST GROUP) B"sic Electric"l Engineering 1. Kirchhoff s current l"w st"tes th"t (") net current flow "t the junction is positive (b) Hebr"ic sum of the currents meeting "t the junction is zero (c)
More informationEAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS
EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS INSTALLATION PARTS LIST BRITISH PATENT NO. 2470778 EPH MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 32886 (AFTER SALES)
More informationFirst Round Solutions Grades 4, 5, and 6
First Round Solutions Grdes 4, 5, nd 1) There re four bsic rectngles not mde up of smller ones There re three more rectngles mde up of two smller ones ech, two rectngles mde up of three smller ones ech,
More information2N6071A/B Series. Silicon Bidirectional Thyristors TRIACS 4.0 A RMS, V
Preferred Device Sensitive Gte Trics Silicon Bidirectionl Thyristors Designed primrily for full wve AC control pplictions, such s light dimmers, motor controls, heting controls nd power supplies; or wherever
More informationTHE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS. Matej BEZNÁK, Vladimír HANZEN, Ján VRABEC
THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS Mtej BEZNÁK, Vldimír HANZEN, Ján VRABEC Authors: Mtej Beznák, Assoc. Prof. PhD., Vldimír Hnzen,
More information1 Power supply. Contents
/0 Te Power supply Contents Power supplies Selection guide pges /2 nd /3 nd trnsformers - presenttion nd selection pge/4 to /3 Phseo switchmode supplies pge /4 Filtered rectified power supplies pge /4
More informationDIN/ANSI Shark Line Material Specific Application Taps. New Products 2017
DIN/ANSI Shrk Line Mteril Specific Appliction Tps New Products 2017 SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security. Shrk Line
More informationCompared to generators DC MOTORS. Back e.m.f. Back e.m.f. Example. Example. The construction of a d.c. motor is the same as a d.c. generator.
Compred to genertors DC MOTORS Prepred by Engr. JP Timol Reference: Electricl nd Electronic Principles nd Technology The construction of d.c. motor is the sme s d.c. genertor. the generted e.m.f. is less
More information