LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.
|
|
- Phyllis Snow
- 6 years ago
- Views:
Transcription
1 Section I - Instlltion Preprtion Prt Numer: Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts Note: None Quntity Reqd. Recommended Tools Sfety Tools Specil Tools Quntity Reqd. Hrdwre Bg Contents Sfety goggles Quntity Reqd. Description 4 Plstic Retiner Crip Description (pinted prts) Legend Lyout STOP: Dmege to the vehicle my occur. Do not proceed until prpcess hs een complied with. OPERATOR SAFETY: Use cution to void risk of injury. CRITICAL PROCESS: Proceed with cution to ensure qulity instlltion. These points will e udited on completed vehicle instlltion. GENERAL PROCESS: This highlights specific processes to ensure qulity instlltion. These points will e udited during the ccessory instlltion. TOOLS & EQUIPMENT: Clls out the specific tools nd equipment recommended for this process. Instlltion Tools Drill Drill it Screwdriver(+,-) Clip removl tool File or stright flute remer Rtchet Socket & Extention Scrier Cloth tpe Msking tpe Push pin Air gun Lint-free cloth Specil Chemicls Genuine wx remover TM 3M Adhesion Promoter K-500 Recommended Sequence of Appliction Issue:A 08/7/05 Vrile 3 (hole sw) 0mm Deep Well *Mndtory Pge of 7 pges
2 LEXUS IS50/IS350 A. Prts Rmovl Protecting Vehicle Prts. To protect the re from scrtches, ffix cloth tpe to the hedlight nd the prting re etween the fender pnel nd the umper. FRONT SPOILER Remove The Front Spoiler. Remove the nine tpping screws nd two clips.. Detch the ten ts nd remove the front spoiler. 9 Tpping Screws Clips Prts Rmovl. Remove the four clips from the rch nd two tpping screws in the order of nd s shown. At the wheel rch, turn the clips 90 efore pulling them out. Do not misplce the prts tht you hve removed from the vehicle ecuse you will e reusing them.. Detch the ts t three res mrked (RH nd LH). : T Positions Tpping Screws Clip Issue:A 08/7/05 Pge of 7 pges
3 LEXUS IS50/IS350 FRONT SPOILER B. Processing Front Bumper Cover Drilling Holes in Front Bumper Cover. Plce mrks on the three mrking points (t the two res) ehind the front umper cover y fully inserting push pin into the centers of those points. When plcing the mrks with push pin, insert the push pin perpendiculrly to the umper surfce. To check the mrking positions esily, illuminte the inside of the umper with work light. Mrking The other side of umper Push pin Push Pin. Drill 3 pilot holes t the six loctions tht you hve mrked. 3. Using hole sw, ore ø full holes over the six pilot holes tht you hve drilled (this will crete two slotted holes). 4. Use smll file to remove urrs from the holes. 5. Repet the opertion on the RH side in the sme mnner. this will crete slotted holes (RH nd LH) To protect the front umper cover nd other prts from scrtches while mking the holes, wrp cloth tpe, which cts s stop, round the drill nd the hole sw t the positions shown elow. Use hole sw with distnce of less thn 3mm from the end of the center drill to the stop. If the mrks remin fter the holes hve een mde, use smll file to enlrge the holes. Mrks Pilot hole 3 6 Full hole 6 (Hole sw) Mrking Cloth tpe 0mm 5mm 3mm Drill 3 Drill it, Hole sw Degrese the Front Bumper Cover. Use genuine wx remover to degrese the htched re.. Repet the opertion on the RH side in the sme mnner. After dwgresing the res, do not touch them. Issue:A 08/7/05 Pge 3 of 7 pges
4 C. Instlltion of the front spoiler Disposing of Liners. Peel the two liners from the dhesive tpe on the front spoiler, out 30mm from the inner side of the vehicle, nd secure them with msking tpe. Liner Msking Tpe Temporry Instlltion of Front Spoiler. Instll the front spoiler nd engge the eight ts. : T Positions Instlltion of Plstic clip. Pull the side of the front umper cover outwrd of the vehicle, nd engge the two plstic clips to the rcket.. Repet the opertion on the RH side in the sme mnner. The other side of umper Plstic clips Brckets Issue:A 08/7/05 Pge 4 of 7 pges
5 Instltion of Front spoiler. Using the cross section in the illustrtion s reference, check the verticl position of the fender liner nd the engine undercover.. Engge the six ts of the front umper cover, which were previously removed. 3. Instll the two tpping screws nd six clips tht were removed, in the order shown in Figures through 3. 3 Tpping Screw Clips 3 : T Positions Tpping Screw Front umper cover Fender liner Fender liner Front spoiler Engine undercover Front spoiler Pressure the dhesive tpe. Peel the liner from the dhesive tpe of the front spoiler in the direction shown, nd ffix the dhesive tpe.. Repet the opertion on the RH side in the sme mnner. Pull the liner while pushing on the front umper cover, without llowing the liner to ter in the middle. Apply minimum pressure of 49N to ffix the dhesive tpe. Otherwise the dhesive tpe could come loose nd crete gp. Slowly peel the entire liner Apply Pressure Peel liner Push Front Bumper cover Front Spoiler Issue:A 08/7/05 Pge 5 of 7 pges
6 Fully tighten of Front spoiler. Using nine tpping screws, fully tighten the temporrily chmfered portions of the front spoiler nd the front umper cover from the outside towrds the inside of the vehicle.. Remove ll the pieces of cloth tpe tht were previously ffixed. Tighten Tpping screws 9 Notes fter instlltion is completed Verifying Instlltionr. Check tht the front spoiler is secured properly to the frontumper.. Check tht ll the cking sheets re removed from the dhesive tpes, nd tht the dhesive tpes re ffixed securely. 3. Check tht the front spoiler nd the vehicle prts did not get scrtched during the instlltion. Notes. Mke sure the front spoiler is not exposed to wter for 0 minutes fter the instlltion. Otherwise, the dhesive tpe could peel nd crete gp etween the front umper nd the front spoiler. Issue:A 08/7/05 Pge 6 of 7 pges
7 Section III - Hndling Repir Prts Section III - Hndling Repir Prts Instlltion Prts Adhesive Tpe.5 5mm 0.6 Work Procedure Pinting the Spoiler. Msk the re to which the dhesive tpe is to e ffixed, nd the RH nd LH extensions.. After pplying pinting primer, pply pint y using the - cross section s reference. Direction for ffixing the dhesive tpe Scrie Scrie line line Adhesive tpe Extensions LH Direction for ffixing the dhesive tpe Scrie Scrie line line Adhesive tpe Extensions RH Affixing Protector nd Adhesive Tpe TM. Apply 3M Adhesion Promoter K-500 to the re to which the dhesive tpe is to e ffixed in ccordnce with the TM directions for using the 3M Adhesion Promoter K Use the - cross section s reference. Affix dhesive tpe so tht its upper edge is.5 mm from the scrie line locted inwrd of the vehicle. Cut the excess portion of the dhesive tpe long the scrie line locted t the end. Pinting rnge 3. Apply minimum pressure of 49N to the ffixed Adhesive tpe. Scrie line mm.5mm 0.5mm Adhesive tpe Issue:A 08/7/05 Pge 7 of 7 pges
ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION
EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE
More informationMulti-Point Astragal Prehanger Installation Instructions
Multi-Point Astrgl Prehnger Instlltion Instructions 8817 West Mrket Street Colfx, NC 27235 800.334.2006 www.endurproducts.com Tools Required: Endur Router Templte (or equivlent) Router with 5/8" dimeter
More informationCanopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:
Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result
More informationNORTH STAR 4-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T Phone: (519) 637-7899 Toll Free: (800) 65-5701 Fax: (519) 637-3403 Web Site: www.northstarwindows.com NORTH STR 4-PNEL PTIO DOOR SSEMLY INSTRUCTIONS (JN/P-Dr04/4Panssy
More informationUPTOWN CANOPY FRAME T/F/Q
UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly
More informationSCION tc 2005 PEDESTAL SPOILER Preparation. Part Number: PT47A XX PT47A XX PT47A XX
Preparation Part Number: PT47A-21052-XX PT47A-21062-XX PT47A-21082-XX Kit Contents Item # Quantity Reqd. Description 1 1 Painted Spoiler Assembly 2 1 LH Gas Strut 3 1 RH Gas Strut 4 1 Hardware Bag Hardware
More information670 Freestyle/Style Door with In-Line Panel
M 670 Freestyle/Style oor with In-Line Pnel Style Series Option Metl HK87 Slide MGNETIC PULL HNLE KIT with Mgnet Vinyl 083 JM E 989 MGNETIC OOR STOP N H900 PN HE SCREW C (CUH or MG) 781 HEER 716 HEER /
More informationFOR DEVICES SOLD PRIOR TO
23970734 98/9949 CS 98/9949 FOR DEVICES SOLD PRIOR TO 8-10-16 This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Instlltion Instructions
More information* * 33/3549A CS 33/3549A. 2-Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970726* 23970726 33/3549A CS 33/3549A Instlltion Instructions This instruction covers new instlltion of the 33/3549A conceled verticl device for luminum nd hollow metl doors. RF Also covered is the
More informationTOYOTA PRIUS V MUDGUARDS Preparation
Preparation Part Number: PU060-47-P Kit ontents Front Passenger Side Mudguard Front river Side Mudguard Rear Passenger Side Mudguard 4 Rear river Side Mudguard 5 Hardware Kit 6 Instruction Sheet NOTE:
More informationSeries Door with In-Line Panel (GIH / AHD)
600 7000 Series oor with In-Line Pnel (GIH / H) H900 P H 083 JM C 781 HR 716 HR / SILL ISRT H900 P H F H170 MGTIC STRIP H900 P H 083 JM H5195 STTIG LOCK VRTICL VIYL GLZIG X Y Z HORIZOTL VIYL GLZIG FRM
More informationTOYOTA C-HR MUDGUARDS Preparation. Part Number: PU P1
Preparation Part Number: PU060-10016-P1 Kit ontents Item # Quantity Reqd. escription 1 1 Front Passenger Side Mudguard 2 1 Front river Side Mudguard 3 1 Rear Passenger Side Mudguard 4 1 Rear river Side
More informationTUR DOORS SHOWER DOORS
TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ
More informationUltimate Trilennium Astragal Prehanger Installation Instructions
Ultimte Trilennium Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure 1" Spde Bit Kit Includes: Full Astrgl Full
More informationUltimate Push Button Astragal Prehanger Installation Instructions
Ultimte Push Button Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Power Drill with 1" Drill Bit Tpe Mesure Kit Includes: Full Astrgl Full Length
More informationSCION FR-S REAR SPOILER Preparation
Preparation Part Number: PT938-18130-XX Kit Contents Item # Quantity Reqd. Description 1 1 Spoiler 2 2 Strut 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 M6 x 1 Nut with
More informationFitting & User Instructions
Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising
More informationARK CHEVRON INSTALLATION GUIDE
ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu
More informationNORTH STAR 2-PANEL PATIO DOOR ASSEMBLY INSTRUCTIONS
40684 Talbot Line, St. Thomas, Ont., N5P 3T2 Phone: (59) 637-7899 Toll Free: (800) 265-570 Fax: (59) 637-3403 Web Site: www.northstarwindows.com NORTH STR 2-PNEL PTIO DOOR SSEMBLY INSTRUCTIONS I:\PDssembly\2Panel\CovPg.doc
More informationUltimate Flip Lever Astragal Prehanger Installation Instructions
Ultimte Flip Lever Astrgl Prehnger Instlltion Instructions Tools Required: Flthed Screwdriver Shers Phillips Screwdriver Tpe Mesure Kit Includes: Full Astrgl Full Length Trim Strip Screw Pck Field Pck
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service
More informationLANCER LOWER GRILLE GARNISH KIT MZ INSTALLATION AND HANDLING INSTRUCTIONS
LNCER LOWER GRILLE GRNISH KIT MZ940000 INSTLLTION ND HNDLING INSTRUCTIONS Thank you for purchasing the Mitsubishi Genuine ccessory. To install and use the product correctly with proper knowledge of it,
More information* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions
*23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS
More informationTP Series - Triple PV Top of Pole Solar LED Lighting System
TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion
More informationTOYOTA TUNDRA 2015 BLACK TEXTURED FENDER FLARE
TOYOTA TUNDRA 2015 BLACK TEXTURED FENDER FLARE Part Number: 00016-34083-02 Accessory Code: BF1000 Conflicts Note: Kit Contents Item # Quantity Reqd. Description 1 1 Left Front Fender Flare 2 1 Right Front
More informationTOYOTA CAMRY/HV MUDGUARDS Preparation
Preparation Part Number: PU060-03180-TP (ll except S/XS) PU060-03181-TP (S/SX Only) Kit ontents 1 1 Front Passenger Side Mudguard 2 1 Front Driver Side Mudguard 3 1 Rear Passenger Side Mudguard 4 1 Rear
More informationHow to remove BRNS/BRFS series from a PWB
Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive
More informationConflicts. TOYOTA Highlander 2015 Fender Flares Part Number: Accessory Code: BF7000. Safety Tools Safety Glasses
Highlander 2015 Fender Flares Part Number: 00016-48016 Accessory Code: BF7000 Conflicts Note: Factory Splash Guards Kit Contents Item # Quantity Reqd. Description 1 1 Left Front Fender Flare 2 1 Right
More informationSCION xa / xb DOOR SILL PROTECTOR Section I Installation Preparation
Section I Installation Preparation Part Number(s): PTS21-52030 (xa, ) PTS21-52031 (xa, Rear) PTS21-52032 (xb, ) PTS21-52033 (xb, Rear) Kit Contents, (PTS21-52030 or PTS21-52032) Item # Quantity Reqd. Description
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS DESCRIPTION: APPLICATION: PART NUMBER: REAR SPOILER KIT - CARBON FIBER INFINITI Q60 T99J1 5CH0B KIT CONTENTS: Item Qty. Part Description A 1 Spoiler Assembly B 4
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Kit G Coupe 999J2 JxxxxB4 (xxxx Designates model year and color) Item Qty. Description Part Number
More informationTOYOTA CAMRY LIP SPOILER Preparation
Preparation Part Number: PT29A-03070-XX Kit Contents 1 1 Lip Spoiler 2 1 Hardware Bag Hardware Bag Contents 1 2 M6 Nuts 2 2 M6 Bolts Additional Items Required For Installation 1 1 Installation Kit, P/N
More information4 BAY Low Profile - SINGLE XL DISPLAY WALL MOUNT CABINET
D1/347Mxl SSEMLY INSTRUCTIONS 4 Y Low Profile - SINGLE XL DISPLY WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use with video monitors weighing 300 lbs (136kg) or less. Use with
More informationTOYOTA Tundra 2014 Fender Flare Set
2014 Part Number: 00016-34047 Accessory Code: TG1 Conflicts Note: Regular Cab Kit Contents Item # Quantity Reqd. Description 1 1 Left Front Fender Flare 2 1 Right Front Fender Flare 3 1 Left Rear Fender
More informationDRAWING TABLE SYSTEM
DRWING TBLE SYSTEM DT31, DT61S, & CDTC71 MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : CRETED NME THIS DRWING IS THE SOLE PROPERTY OF DIVERSIFIED WOOD CRFTS. IT MY NOT BE LTERED OR CHNGED WITHOUT
More informationBolt-On/Rugged Fender Flares Chevy CK PICKUP (88-98) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 25ft SMALL CLIPS 14 ALLEN KEY BOLT 42 ALCOHOL TOWELETTE 4 SCREWS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 30914 UNDER SPOILER 2006 TL Issue Date SEP 2005 PARTS LIST Front under spoiler Template B Left bracket (Marked L) Left cover (Marked
More informationTOYOTA TACOMA LED BED LIGHTS Preparation
Preparation Part Number: PT948-35160 Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver Side LED assembly 3 1 Passenger Side LED assembly 4 1 Main Wire Harness Hardware Bag Contents
More informationNOTE THAT THE HANDLE IS BELOW THE LOCK BASE
NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N
More informationTOYOTA PRIUS BODY SIDE MOLDING Preparation
Preparation Part Number: PT938-47160-XX Kit Contents Item # Quantity Reqd. Description 1 1 Molding, LH Front Door 2 1 Molding, LH Rear Door 3 1 Molding, RH Front Door 4 1 Molding, RH Rear Door Hardware
More informationEAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR
EAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR INSTALLATION PARTS LIST BRITISH PATENT NO:470778 MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454 388
More information* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service
*24017501* 24017501 Coneled Vertil Devie for Wood Doors 98/9949WDC Instlltion Instrutions 1-Point Lth (LBL) 2-Point Lth inludes these dditionl prts NOTE: If door does not hve utout for ling inside lok
More informationINSTALLATION INSTRUCTIONS
INSTLLTION INSTRUCTIONS GEN X STEP BRS PPLICTION: 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Double Cab 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Crew Cab 2015+ Chevrolet Silverado & GMC Sierra
More information4 BAY Low Profile WALL MOUNT CABINET
D1/347 SSEMLY INSTRUCTIONS 4 Y Low Profile WLL MOUNT CINET TIP HZRD WRNING! Cabinet must be affixed to wall. For use to prevent tipping in compliance with capacity of cabinet specified. Use with heavier
More information2015 GMC Yukon. Upper Class Grille Insert
Upper Class Grille Insert TOOLS REQUIRED: Flat Head Screwdriver Long Flat Head Screwdriver Phillips Screwdriver 7mm Socket 10mm Socket Ratchet & Extensions 3/16 Drill Bit Power Drill Cutting Wheel or Saw
More informationAL Series. Tropical Lighting System. Installation Manual
AL Series Tropicl Lighting System Instlltion Mnul Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion instructions for the Sol Tropicl Lighting System (AL) Series solr LED
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
PPLICTION: 2003-15 1500/2500/3500 HD SILVERDO/SIERR EXTENDED C/DOULE C/CREW C INCLUDING DIESEL EQUIPPED & 03-0 CLSSIC MODELS PRT # 5-5165, 5-5155 HDX RUNNING ORDS UTOMOTIVE PRODUCTS, INC. 1 INSTRUCTIONS
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08P00-TK6-100 Application 2013 FIT (BASE MODEL) Publications No. AII 13241 Issue Date JULY 2012 PARTS LIST Right front splash guard TOOLS AND SUPPLIES REQUIRED
More informationBolt-On/Rugged Fender Flares GMC Sierra 1500/2500/3500 (14-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included Extrusion 30.5ft (Bolt-On look flare only) QTY U CLIP.6mm 6 Nuts
More informationTubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a
Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless
More informationABOUT THIS MANUAL ABOUT THIS MANUAL
ABOUT THIS MANUAL ABOUT THIS MANUAL This mnul provides detils on IQ Designer, which is ville with the upgrde. Mke sure tht the mchine hs een upgrded to the most recent version. When you find this icon
More informationBolt-On/Rugged Fender Flares Toyota Tundra (14-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY Extrusion 28.0 ft Short Screw 18 Nuts 42 Alcohol Wipe 4 Long
More informationOperation Manual. Addendum. Embroidery Machine. Product Code: 884-T13
Emroidery Mchine Opertion Mnul Addendum Product Code: 884-T13 Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for future reference. ABOUT THIS MANUAL ABOUT
More informationExtremely small "footprint" and the highest circuit density available AK550. Front Wire Entry
FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers
More informationPLANNING & LAYOUT BENCH
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : : LL VLUES ± OVERLL CRETED 1 OF 5 K:\DIVERSIFIED\\CD\.dwg, 11/30/2015 9:58:11 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1 2 " SOCKET ND TORQUE WRENCH
More informationThe Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center
Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition
More informationFENDER FLARE. KIT CONTAINS Qty Part Description Qty Part Description TOOLS REQUIRED
` FENDER FLARE Part No: FFD3001S TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF THE FENDER FLARE CAREFULLY. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. 60-180 min Cutting Not Required
More informationGENUINE FRONT UNDER GARNISH
GENUINE FRONT UNDER GARNISH INSTALLATION AND USER S INSTRUCTIONS Thank you for purchasing a Genuine Mazda Accessory. Before removal and installation, please thoroughly read these instructions. For your
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory WELL P/N 08P21-STX-200A Application 2011 MDX Publications No. BII 43668 Issue Date AUG 2010 PARTS LIST Left front fender trim Bracket A-L Left front bumper trim Bracket
More informationINSTALLATION MANUAL. English Edition D75X ULTRA SHORT SERIES
INSTLLTION MNUL English Edition D75X ULTR SHORT SERIES SFETY INSTRUCTION For your safety, please read the instruction before using the wall mount bracket. ny improper disposition caused by ignoring this
More informationBolt-On Fender Flares Nissan Titan XD (16-ON) Important: Please read instructions entirely before installing this product.
Important: Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included Extrusion 30.5ft (Bolt-On look flare only) QTY U CLIP.6mm 6 Nuts
More informationROOF RACK INSTALLATION INSTRUCTIONS (FOR FITMENT TO EGR CANOPIES)
INSTLLTION INSTRUCTIONS (FOR FITMENT TO EGR CNOPIES) FORD RNGER XL and XLT - (2006 Production Onwards) HOLDEN COLORDO - (2006 Production Onwards) MITSUISHI TRITON MN - (2009 Production Onwards) Installation
More informationMATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR
MATKI ONE MOWP - WETROOM PANEL & BRACE BAR MOWV - WETROOM PANEL & CEILING BAR INSTALLATION PARTS LIST MOWV MOWP MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454
More informationTOYOTA RAV DOOR SILL PROTECTOR Preparation
Preparation Part Number: PU060-42141-P1 Kit Contents 1 2 Door Sill (w/logo) 2 2 Rear Door Sill (w/graphic) Hardware Bag Contents Additional Items Required For Installation 1 2 3 Conflicts Note: Recommended
More informationPart Number: ;-02;-03;-08;-10;-11;-18;-21
Document # 4065 4/3/06 TOYOTA MATRIX 2006 - FENDER FLARES Section I Installation Preparation Part Number: 00016-12120-01;-02;-03;-08;-10;-11;-18;-21 Code: SF1 Kit Contents Item # Quantity Reqd. Description
More informationIncluded in Hardware Kit: Jeep Pocket Style Fender Flare Set of 4. Set Part # Rev-0 3/15/2013 TOOLS FOR EASY INSTALLATION:
STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to these instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 33173 UNDER 2007 ODYSSEY Issue Date JULY 2006 PART LIST Front under spoiler 5 Stepped bolts TOOLS AND SUPPLIES REQUIRED Phillips screwdriver
More informationTOYOTA COROLLA EC REARVIEW MIRROR Section I Installation Preparation
Section I Installation Preparation Part Number: PT374-02030 Section I Installation Preparation Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/compass & Maplights 2 1 Hardware Bag
More informationTOYOTA MATRIX FENDER FLARES
Document # 2880 Created 11/29/04 TOYOTA MATRIX 2005 - FENDER FLARES Section I Installation Preparation Part Number: 00016-12120-01;-02;-03;-08;-10;-11;-18;-21 Code: SF1 Kit Contents Item # Quantity Reqd.
More informationBACK DOOR GLASS REPLACEMENT HINT:
WINSHIEL/WINOWGLSS/MIRROR REPLEMENT 7025 The instlltion proeures re the removl proeures in reverse orer. However, only instlltion proeures requiring itionl inormtion re inlue. 700VX01 Pino Wire lip 1.
More informationDRAWER BASE DRAWING TABLE
MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED B UPD STEP 1 NME ECN NO. : : : DIMENSION RE IN INCHES 1 OF 10 K:\DIVERSIFIED\\CD\.dwg, 9/25/2018 9:04:08 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 33380 SIDE S 2007 S2000 Issue Date AUG 2006 PARTS LIST Left upper side strake 2 Grommets 2 Butyl O-rings 2 Washer-screws, 6 x 20 mm
More informationRadiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
More informationEAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS
EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS INSTALLATION PARTS LIST BRITISH PATENT NO. 2470778 EPH MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 32886 (AFTER SALES)
More informationFor installation help please visit Please Do Not Return Product to Store!
Instlltion Guide Replement Sreen Housing for ndersen Luminire Retrtle Inset Sreen Door For instlltion help plese visit www.ndersenluminire.om/instll Plese Do Not Return Produt to Store PLESE ll the Storm
More informationTOYOTA TACOMA SKID PLATE, FRONT Preparation
Preparation Part Number: PTR60-35160 Kit Contents 1 1 TRD Skid Plate 2 1 Instruction Sheet 3 1 Hardware Kit (Pre-installed) Hardware ag Contents (PTR60-35160-HW) 1 2 M12 x 31.5mm Spacer 2 2 M12 x 45mm
More informationToyota OE Style Fender Flares Set of 4
Toyota OE Style Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationIncluded in Hardware Kit 4. Jeep Wrangler JK 4-Door Rear Flares. Set Part # Rev STEP 1 PRIOR TO INSTALLATION
A) B) C) D) E) STEP 1 PRIOR TO INSTALLATION Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure to install according to
More informationASSEMBLY INSTRUCTIONS 5PC Storage Dining Set
ASSEMLY INSTRUTIONS 5P Storge Dining Set Sers Stock # 56170 VL Stock #07-2204 U S T O M E R S E R V I E I N F O R M AT I O N Victory Lnd Group, Inc 1350 Munger Rd rtlett, IL 60103 WE: http://www.victorylndgroup.com
More informationAquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;
Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with
More informationBolt-On/Rugged Fender Flares Ford F150 (15-ON) Please read instructions entirely before installing this product.
Please read instructions entirely before installing this product. Hardware Included QTY Hardware Included QTY Bolt Kit Included QTY EXTRUSION 29ft RETAINING CLIP 4 ALLEN KEY BOLT 42 ALCOHOL TOWELETTE 4
More informationWhole House Fan. WHF 1500, GF 1500, WHF 3000 Installation Instructions. Parts List * Required Tools:
Whole House Fn WHF 1500, GF 1500, WHF 3000 Instlltion Instructions Prts List * Quntity 1 Fn Assemly w/ Set Screw (WHF 3000 Shown) (1) 1 2 Insulted Ducting (1) 3 Dmper Box (1) 4 Fn Grill (1) 5 HushMount
More informationGeneral Instructions 03HEL1010DDFW-V3. Please retain product label and instructions for future reference. 10x10 Helios Summer House
Generl Instructions Plese retin product lel nd instructions for future reference 03HEL1010DDFW-V3 x2 All uilding s should e erected y two dults Winter = High Moisture = Expnsion Summer = Low Moisture =
More informationGMC Extend-A-Fender Fender Flares Set of 4
GMC Extend-A-Fender Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More information4-Door Rear XHD Armor Fenders
Page 1/10 Part #11615.02 Page 2/10 1 4 2 3 5 Components 1. Left Rear Fender (1) 2. Right Rear Fender (1) 3. Left Rear Guard (1) 4. Right Rear Guard (1) 5. License Plate Bracket (1) OMIX-ADA TECHNICAL SUPPORT
More informationINSTALLATION GUIDE PREMIUM FRONT BUMPER. AEV30103AE Last Updated: 09/08/14 US PATENTS: D683281, D CHINESE PATENT: ZL
PREMIUM FRONT BUMPER US PATENTS: D683281, D697842 CHINESE PATENT: ZL 2012 3 0026081.4 AEV30103AE Last Updated: 09/08/14 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION,
More informationGMC Extend-A-Fender Fender Flares Set of 4
GMC Extend-A-Fender Fender Flares Set of 4 STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationPacking List MODEL TEL-IAL-481 For Inactive Leaf TRIDENT double door
Items: SECURITECH GROUP, INC. MP uxiliary POLICE LOCK Packing List MODEL TEL-IL-481 For Inactive Leaf TRIDENT double door Items with * are pre-installed or assembled Fasteners: Part# Qty Name Description/Usage
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 645 For Chevrolet Silverado 500HD & 3500 This WARN Trans4mer system can be customized to give your Chevy Silverado a wide variety of looks,
More informationOperation Manual. Product Code 885-V55. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX
Computerized Emroidery Mchine Opertion Mnul Product Code 885-V55 GETTING READY EMBROIDERY APPENDIX Be sure to red this document efore using the mchine. We recommend tht you keep this document nery for
More informationINSTRUCTIONS WEATHER - BRAKE New Holland Boomer TC25/25D, TC29/29D, TC33/33D, TC35/35D, TC40/40D, TC45/45D FITS
INSTRUCTIONS WETHER - RKE 2142 FITS New Holland oomer TC25/25D, TC29/29D, TC33/33D, TC35/35D, TC40/40D, TC45/45D General Offices 500 North 81 y-pass McPherson, KS 67460 Phone: (620) 241-3513 Web: www.femcomfg.com
More informationSafety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
More informationFENDER FLARE. KIT CONTAINS Qty Part Description Qty Part Description
` FENDER FLARE Part No: FFC3002S TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF THE FENDER FLARE CAREFULLY. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. 60-180 min Cutting Not Required
More informationToyota FJ Cruiser 2006-Up Set Part # Revision A
Toyota FJ Cruiser 2006-Up Set Part # 31924 Revision A 03-31-08 Step 1: Prior to Installation: A) Fit: Verify the fit of the flares to vehicle. (Some filing, sanding, or cutting may be necessary to ensure
More informationTOYOTA CAMRY & CAMRY HV BODY SIDE MOLDING Preparation
Preparation Part Number: PT938-03120-XX Kit Contents 1 1 Molding, LH Front Door 2 1 Molding, LH Rear Door 3 1 Molding, RH Front Door 4 1 Molding, RH Rear Door Hardware Bag Contents 1 2 Additional Items
More informationPart # 4463 & Ford Mustang C-Series Upper & Lower Grilles
Rev. 3/18 Page 1 Part # 4463 & 4464 2018 Ford Mustang C-Series Upper & Lower Grilles Notice: Install new, parts according to these instructions! Altered Parts are Non-Refundable! Part #4464 Notice: Part
More informationFlat Style Fender Flares Front Pair. Jeep. Included in Hardware Kit:
Jeep Flat Style Fender Flares Front Pair STEP 1 PRIOR TO INSTALLATION A) Bushwacker only approves installing the fl ares according to these written instructions with the hardware provided. WARNING: Failure
More informationWETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850
WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or
More informationTOYOTA YARIS 3 DOOR BODY SIDE MOLDING Preparation
Preparation Part Number: PT938-52110-XX Kit Contents 1 1 Molding, LH Front Door 2 1 Molding, LH Rear Panel 3 1 Molding, RH Front Door 4 1 Molding, RH Rear Panel Hardware Bag Contents 1 2 Additional Items
More informationJeep Wrangler JK & 4-Door Front Pair Part # Revision H
Jeep Wrangler JK 2007 2 & 4-Door Front Pair Part # 10045 Revision H 03-25-09 Step 1: Prior to Installation: A) Bushwacker only approves installing the flares according to these written instructions with
More information