Enhanced performance compression solutions

Size: px
Start display at page:

Download "Enhanced performance compression solutions"

Transcription

1 Enhnced performnce compression solutions

2 Fittings Introduction Pegler Yorkshire hs upgrded the Kuterlite K900 rnge to Kuterlite K900-PRO As prt of our continuous improvement nd development progrmme we hve studied the performnce of compression fittings in the mrket nd found certin pplictions where chnges could further improve performnce. With the intention of providing premium performnce, Pegler Yorkshire hs sustntilly incresed the engineering sfety fctors in the Kuterlite K900-PRO product, principlly the criticl design chrcteristics of the compression nut. Kuterlite K900-PRO fittings re comptile with the following types of tue nd pipe. n Copper tue to BS EN 1057 n Tectite PEX or other PEX pipe to BS 7291 prt 3 n PB pipe to BS 7291 Prt 2 n XPress Cron steel system tue or other cron steel tue to EN sizes up to 28mm n Tectite 316 system tue or other stinless steel tues to EN sizes up to 28mm Professionl instlltion tips To ensure tht these fittings enjoy long servicele life, they must e correctly instlled. Do not over-tighten nuts A mtrix is provided t our wesite: to help the instller pply the correct mount of torque. This is expressed s prtil or whole turns of the nut, nd vries depending upon the type of pipe eing used. Do not contminte Tke cre not to contminte the threds or nuts with jointing compounds. Use prllel threded dptors This will help to void stressing the femle threded ends. Kuterlite K900-PRO fittings re mnufctured to exceed the requirements of BS EN n Kuterlite K900-PRO is recommended for ll pplictions where K900 ws previously recommended including specilist res such s chilled wter Use the correct size spnner K900-PRO nuts re designed to fit the most common metric spnner sizes. An ccurtely set djustle spnner cn lso e used. Compressive gripping devices with serrted jws (e.g. Stilsons) must never e used to instll Kuterlite fitting. Apply some light oil For fittings over 35mm pply few drops of light oil on the threds of the fitting. Use est prctice Avoid contct with chemicls nd chemicl compounds tht could cuse stress corrosion crcking. Instllers should either stisfy themselves tht such chemicls re not present in the environment round the nut, or tke cre to isolte the pluming pipe, vlves nd fittings from such sustnces, for instnce y wrpping in vpour rrier or pplying impermele pints. 2

3 Enhnced performnce K900-PRO compression fittings FORGED NUT Reduces residul stresses BS EN 12165:CW617N INCREASED WALL THICKNESS Exceeds BS EN y 50% WIDE ACROSS FLATS Suits most common metric spnner sizes INCREASED NUT FLAT Full height of nut flt for greter contct n Pronounced shrper cross corners n Thred enggement greter thn BS EN n Aville in sizes 12mm to 54mm n New internl profile helps to ensure correct compression ring deformtion Kuterlite Pro pckging Kuterlire Pro fittings will e pcked into stndrd Kuterlite gs, with instlltion instructions printed on the ck nd then pcked into our stndrd corporte outer crton. For n introductory period we will use sticker on the gs nd outer oxes to highlight the fct tht these products re the new Kuterlite K900-PRO fittings. This will continue until the trnsition to the new design is completed nd then phsed out. 3

4 DZR compression fittings Kuterlite Pro K910X Stright coupling Z Z Order code 10mm K 12mm K 15mm K 18mm K 22mm K 28mm K 35mm K 42mm K 54mm K 12 x 10mm K 15 x 8mm K 15 x 10mm K 15 x 12mm K 18 x 15mm K 22 x 15mm K 28 x 22mm K Suitle for: Copper x copper K910X Stright coupling Z Z Order code 67mm mm mm Suitle for: Copper x copper 4 These items comprise the KS rnge.

5 K910IMX Adptor coupling Z Order code 3" x 76mm " (104mm) x 108mm " (106mm) x 108mm Z Suitle for: Imperil x metric K911X Mle coupling Z Order code 12mm x 3 /8" K 12mm x 1 /2" K 15mm x 1 /4" K 15mm x 3 /8" K 15mm x 1 /2" K 15mm x 3 /4" K 18mm x 1 /2" K 22mm x 1 /2" K 22mm x 3 /4" K 22mm x 1" K 28mm x 3 /4" K 28mm x 1" K 35mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K 54mm x 2" K Suitle for: Copper x BSP tper mle thred K911X Mle coupling Z Order code 67mm x 2 1 /2" mm x 3" mm x 4" Suitle for: Copper x BSP tper mle thred These items comprise the KS rnge. 5

6 DZR compression fittings Z K911PX Mle coupling Z Order code 8mm x 1 /4" K 10mm x 3 /8" K 15mm x 1 /2" K 15mm x 3 /4" K 22mm x 3 /4" K 22mm x 1" K 28mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K 54mm x 2" K Suitle for: Copper x BSP prllel mle thred Z K911LBX Long tnk coupling Z Order code 22mm x 3 /4" K 28mm x 1" K Suitle for: Copper x BSP prllel mle thred K911TCX Tnk coupling Z Z Order code 15mm x 1 /2" K 22mm x 3 /4" K 28mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K 54mm x 2" K Suitle for: Copper x BSP prllel mle thred K911TCX Tnk coupling Z Z Order code 67mm x 2 1 /2" mm x 3" Suitle for: Copper x BSP prllel mle thred 6 These items comprise the KS rnge.

7 K912X Femle coupling Z Order code 12mm x 3 /8" K 12mm x 1 /2" K 15mm x 3 /8" K 15mm x 1 /2" K 15mm x 3 /4" K 18mm x 1 /2"" K 18mm x 3 /4" K 22mm x 1 /2" K 22mm x 3 /4" K 22mm x 1" K 28mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K 54mm x 2" K Suitle for: Copper x BSP prllel femle thred K912X Femle coupling Z Order code 67mm x 2 1 /2" mm x 3" Z Suitle for: Copper x BSP prllel femle thred K915X Elow Z Order code 12mm K 15mm K 18mm K 22mm K 28mm K 35mm K 42mm K 54mm K Suitle for: Copper x copper Z Z These items comprise the KS rnge. 7

8 DZR compression fittings K915X Elow Z Z Order code Z 67mm mm mm Suitle for: Copper x copper K916X Mle elow Z Z Z Z Order code 12mm x 3 /8" K 12mm x 1 /2" K 15mm x 3 /8" K 15mm x 1 /2" K 18mm x 1 /2" K 22mm x 3 /4" K 22mm x 1" K 28mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K 54mm x 2" K Suitle for: Copper x BSP tper mle thred K916X Mle elow Z Z Z Order code 67mm x 2 1 /2" Z Suitle for: Copper x BSP tper mle thred K916PX Mle elow Z Z Z Order code Z 15mm x 1 /2" K 22mm x 3 /4" K 22mm x 1" K 28mm x 1" K Suitle for: Copper x BSP tper mle thred 8

9 K916LBX Long mle elow Z Z Order code Z 22mm x 3 /4" K Z Suitle for: Copper x BSP prllel mle thred K917X Femle elow Z Z Order code Z 12mm x 3 /8" K 12mm x 1 /2" K 15mm x 3 /8" K 15mm x 1 /2" K 15mm x 3 /4" K 18mm x 1 /2" K 22mm x 3 /4" K 22mm x 1" K 28mm x 1" K 35mm x 1 1 /4" K 42mm x 1 1 /2" K Z Suitle for: Copper x BSP prellel femle thred K917WX Femle wll elow c Z Z Order code Z 15mm x 1 /2" K 22mm x 3 /4" K Z Suitle for: Copper x BSP prllel femle thred with ckplte c K918X Equl tee Z Order code Z 10mm K 12mm K 15mm K 18mm K 22mm K 28mm K 35mm K 42mm K 54mm K Z Z Suitle for: All ends for copper These items comprise the KS rnge. 9

10 Tee specifiction UK specifiction Europen specifiction DZR compression fittings K918X Equl tee Z Z Z Order code Z Z 67mm mm mm Suitle for: All ends for copper K918BX Tee, reduced rnch Z Z Z UK Europen Z Z Order code 15 x 15 x 12mm 15 x 12 x 15mm K 22 x 22 x 12mm 22 x 12 x 22mm K 22 x 22 x 15mm 22 x 15 x 22mm K 35 x 35 x 15mm 35 x 15 x 35mm K 35 x 35 x 22mm 35 x 22 x 35mm K 35 x 35 x 28mm 35 x 28 x 35mm K 42 x 42 x 22mm 42 x 22 x 42mm K 42 x 42 x 28mm 42 x 28 x 42mm K 54 x 54 x 28mm 54 x 28 x 54mm K Suitle for: All ends for copper K918BX Tee, reduced rnch Z UK Europen Z Z Order code Z Z 67 x 67 x 28mm 67 x 28 x 67mm x 67 x 35mm 67 x 35 x 67mm x 67 x 42mm 67 x 42 x 67mm x 67 x 54mm 67 x 54 x 67mm x 76 x 28mm 76 x 28 x 76mm x 76 x 54mm 76 x 54 x 76mm Suitle for: All ends for copper 10

11 Tee specifiction UK specifiction Europen specifiction K918EX Tee, one end reduced UK Europen c Z Z Zc Order code c Zc 15 x 12 x 15mm 15 x 15 x 12mm K 22 x 15 x 22mm 22 x 22 x 15mm K 28 x 15 x 28mm 28 x 28 x 15mm K Z Z Suitle for: All ends for copper K918EBX Tee, end nd rnch reduced UK Europen c Z Z Zc Order code c Zc 15 x 12 x 12mm 15 x 12 x 12mm K 22 x 15 x 15mm 22 x 15 x 15mm K 28 x 22 x 22mm 28 x 22 x 22mm K Z Z Suitle for: All ends for copper K918EEX Tee, oth ends reduced UK Europen Z Z Order code Z 12 x 12 x 15mm 12 x 15 x 12mm K 15 x 15 x 22mm 15 x 22 x 15mm K 22 x 22 x 28mm 22 x 28 x 22mm K Z Z Suitle for: All ends for copper K920X Mle end tee UK Europen c Z Z Order code 15 x 1 /2" x 15mm 15 x 15mm x 1 /2" K c Zc Z Suitle for: Copper x BSP tper mle thred x copper rnch K920HX Mle rnch tee UK Europen Z Order code 15 x 15mm x 1 /2" 15 x 1 /2" x 15mm K Z Z Suitle for: Copper x copper x BSP tper mle rnch 11

12 Tee specifiction UK specifiction Europen specifiction DZR compression fittings Z K923X Cross Z Order code 15 x 15 x 15 x 15mm K Suitle for: All ends for copper K926X Stright swivel tp connector Z Z Order code 15mm x 1 /2" K 15mm x 3 /4" K 22mm x 3 /4" K Suitle for: Copper x union nut plus wsher K927X Bent swivel tp connector Z Z Z Order code Z 15mm x 1 /2" K 22mm x 3 /4" K Suitle for: Copper x union nut plus wsher K930X Femle rnch tee Z Z Z UK Europen Z Z Order code 15 x 15mm x 1 /4" 15 x 1 /4" x 15mm K 15 x 15mm x 1 /2" 15 x 1 /2" x 15mm K 22 x 22mm x 1 /2" 22 x 1 /2" x 22mm K 22 x 22mm x 3 /4" 22 x 3 /4" x 22mm K 28 x 28mm x 1 /2" 28 x 1 /2" x 28mm K 28 x 28mm x 1" 28 x 1" x 28mm K Suitle for: Copper x copper x BSP prllel femle rnch 12 These items comprise the KS rnge.

13 Tee specifiction UK specifiction Europen specifiction K930EX Femle end tee UK Europen c Z Zc Order code c Zc 15 x 1 /2" x 15mm 15 x 15mm x 1 /2" K 22 x 1 /2" x 22mm 22 x 22mm x 1 /2" K 22 x 3 /4" x 22mm 22 x 22mm x 3 /4" K 28 x 1 /2" x 28mm 28 x 28mm x 1 /2" K Z Suitle for: Copper x BSP prllel femle end x copper rnch K941X Femle dptor Order code 22mm x 3 /4" K Suitle for: Converting Kuterlite end to BSP prllel femle thred K947X One piece reducer Order code 15 x 8mm 43429K 15 x 10mm 43428K 15 x 12mm 3430K 18 x 12mm 43437K 18 x 15mm 43431K 22 x 12mm 43432K 22 x 15mm 43433K 22 x 18mm 43434K 28 x 15mm 43435K 28 x 22mm 43436K Suitle for: Reducing the size of Kuterlite sockets 13

14 DZR compression fittings K948X Reducing set Order code 35 x 15mm 43453K 35 x 22mm 43455K 35 x 28mm 43456K 42 x 15mm 43457K 42 x 22mm 43459K 42 x 28mm 43460K 42 x 35mm 43461K 54 x 22mm 43463K 54 x 28mm 43464K 54 x 35mm 43465K 54 x 42mm 43466K Suitle for: Reducing the size of Kuterlite sockets K950X Tnk connector Z Z Order code 15mm K 22mm K 35mm K 42mm K 54mm K Suitle for: Copper end with flnge nd locknut K951X Stop end Z Order code 12mm K 15mm K 18mm K 22mm K 28mm K 35mm K 42mm K 54mm K 67mm mm mm Suitle for: Body my e removed t ny time nd nother Kuterlite fitting used with compression nut nd compression ring. 14 These items comprise the KS rnge.

15 K953X Crossover Z Order code 15mm K 22mm K Z Suitle for: Copper x copper K972X/K1772X Blnking plug 15mm 18mm ( 3 /8") 22mm ( 1 /2") 28mm ( 3 /4") 35mm (1") Order code 43531K 43532K 43533K 43534K 43535K Suitle for: Blnking off one end of fitting K972X Blnking plug 42mm (1 1 /4") Order code 43536K Suitle for: Blnking off one end of fitting K1870X Kufit dptor Order code 15mm 62544K 22mm 62547K 28mm 62548K 28 x 15mm 62556K 28 x 22mm 62557K Suitle for: Converting K900 type A to type B for soft copper 15

16 Pegler Yorkshire Our rnds: UK sles Free Phone: Free Fx: Emil: Export Tel: +44 (0) Fx: +44 (0) Emil: Technicl Help Free Phone: Free Fx: Emil: Brochure Hotline Free Phone: Free Fx: Emil: RENEWABLE SOLUTIONS LUXURY TAP SOLUTIONS Pegler Yorkshire Group Limited St. Ctherine s Avenue, Doncster, South Yorkshire, DN4 8DF, Englnd. Tel: Fx: Registered in Englnd Compny No Registered Office: High Prk Rod, Stourton, Leeds, West Yorkshire, LS10 1RT, Englnd. All rnd nmes nd logo styles re registered trdemrks. Mintining policy of continul product development, Pegler Yorkshire reserves the right to chnge specifictions, design nd mterils of products listed in this puliction without prior notice. LIT.REF:

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTLLTION INSTRUCTIONS GEN X STEP BRS PPLICTION: 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Double Cab 2014-2015 Chevrolet Silverado & GMC Sierra 1500 Crew Cab 2015+ Chevrolet Silverado & GMC Sierra

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution Incrementl encoders Solid shft with clmping or synchro flnge 0 5000 pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge

More information

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7

Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7 RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø

More information

Union coupling, copper x female thread. Cone joint

Union coupling, copper x female thread. Cone joint Union coupling, copper x female thread. Cone joint N69F Union coupling Size Pattern No. Pack 1 Qty Pack 2 Qty Code Barcode Price ( ) ex VAT test 15mm x 1/2" N69F 10 100 84842D 5022050269638 3589.48 22mm

More information

PEGLER YORKSHIRE PRESTEX PRICE LIST CONTENTS

PEGLER YORKSHIRE PRESTEX PRICE LIST CONTENTS PEGLER YORKSHIRE PRESTEX PRICE LIST CONTENTS Fittings Brass Compression Fittings 3-8 Chrome Compression Fittings 9-10 Valves Plumbing Valves 11-19 Maintaining a policy of continual product development

More information

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;

Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed; Aquuno Select Pg. INSTALLATION. Attch the timer to cold wter tp, following these simple instructions. Do not instll the timer in pit or vlve ox, elow ground level or indoors. Do not use the timer with

More information

How to remove BRNS/BRFS series from a PWB

How to remove BRNS/BRFS series from a PWB Applictions mnul for BRNS/BRFS series How to remove BRNS/BRFS series from PWB VER1.0 Applictions Mnul BRNS/BRFS series Pge 1. Overview 1-1 1.1 Overview 1-1 2. Preprtion 2-1 2.1 2.2 2.3 Removl tool Adhesive

More information

INSTRUCTIONS INSTRUCCIONES CONSIGNES

INSTRUCTIONS INSTRUCCIONES CONSIGNES PPLICTION: 2003-15 1500/2500/3500 HD SILVERDO/SIERR EXTENDED C/DOULE C/CREW C INCLUDING DIESEL EQUIPPED & 03-0 CLSSIC MODELS PRT # 5-5165, 5-5155 HDX RUNNING ORDS UTOMOTIVE PRODUCTS, INC. 1 INSTRUCTIONS

More information

Fitting & User Instructions

Fitting & User Instructions Issue 03 Alexnder Universl Furniture Risers Note: These frmes require the ddition of n ttchment. (See pges 4 - ) Bse Frme Mrk Bse Frme Mrk Fitting & User Instructions These instructions pply to the rising

More information

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.

Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501. Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple

More information

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION

ET 51 EXTERIOR ROOF DRIP SIDE FINISH MOULDING INSTALLATION EXTERIOR ROOF DRIP SIDE FINISH MOULDING 51 INSTALLATION The procedure descried elow is for the LH side. Use the sme procedure for oth the RH nd LH sides, unless otherwise specified. 1. INSTALL ROOF SIDE

More information

Large Commercial Trunking

Large Commercial Trunking Lrge Commercil Trunking 3.2 CONTENTS Lrge Commercil SIGNO BK - PVC-U...................3.7 Trunking 110x70 to 220x70mm SIGNO BA - Aluminium............... 3.13 110x70 to 220x70mm SIGNO BS - Steel...................

More information

Device installation. AFR 1xx - Feature Description of the Smart Load. AFR1xx 145 % 200 %

Device installation. AFR 1xx - Feature Description of the Smart Load. AFR1xx 145 % 200 % KM systems, s.r.o. Dr. M. Horákové 559, 460 06 Lierec 7, Czech Repulic tel. +420 485 130 314, fx +420 482 736 896 emil : km@km.cz, url : www.km.cz sturtion of the mgnetic circuit of the VT. This often

More information

Canopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev:

Canopy Bed Frame. Date: 8 Jun 15 www. potterybarn.com Page 1 of 12 Rev: Cnopy Bed Frme Dte: 8 un 15 www. potterybrn.com Pge 1 of 12 Importnt Sfety Instructions: WARNIN: Do not llow children to climb on, pull on, or hng from cnopy. Filure to follow these instructions cn result

More information

GENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES

GENERAL NOTES 1600 SYSTEM NOTES STRUCTURAL SEAL NOTES 1 - HANDLING, STORING AND PROTECTING ALUMINUM MATERIAL. 2 - GENERAL RULES GENERL NOTES 162-971 1 OF 12 THESE INSTLLTION INSTRUCTIONS RE SUPPLEMENT TO THE PPROVED SHOP DRWINGS. USE IN CONJUNCTION WITH THOSE DRWINGS. 1 - HNDLING, STORING ND PROTECTING LUMINUM MTERIL. THE FOLLOWING

More information

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts

Update B158J New Chip Breaker Inserts for Turning Expanded Inserts 2009.4 Updte B158J Expnded s New Chip Breker s for Turning Breker Offers the best performnce for utomotive prts pplictions! ysmooth chip control even t vried depths of cut, feeds nd cutting speeds! New

More information

Innovative plate solutions for flexographic printing. nyloflex printing plates

Innovative plate solutions for flexographic printing. nyloflex printing plates Innovtive plte solutions for flexogrphic printing nyloflex printing pltes nyloflex Printing Pltes Unique nd comprehensive expertise in flexogrphic printing Printing pltes from Flint Group to meet every

More information

Multi-Purpose Handles Lift, Pull, Cabinet and Finger

Multi-Purpose Handles Lift, Pull, Cabinet and Finger Multi-Purpose Handles from UNITED Multi-Purpose Handles Lift, Pull, Cabinet and Finger LIFT Fixtures Cabinets ZINC PLTED WROUGHT STEEL UNITED'S UNIVERSL FVORITE! Strong Simple Quick Installation Widely

More information

TUR DOORS SHOWER DOORS

TUR DOORS SHOWER DOORS TUR DOORS SHOWER DOORS INSTALLATION INSTRUCTIONS TUB DOORS: LBTDB6062 SHOWER DOORS: LBSDB4876 LBSDB6076 VERSION: 3.2 PREPARATION FOR INSTALLATION TUB DOORS SHOWER DOORS PREPARATION FOR INSTALLATION READ

More information

* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP

* TURNING SPACE ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * TURNING SPACE ** RAMP * MXIMUM TURNING SPCE IS 2.0% IN ECH DIRECTION OF TRVEL. MINIMUM DIMENSIONS 5' x 5'. SEE NOTES. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). SEE NOTES. "NON-WLKING" RE * TURNING SPCE 24"

More information

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars

PB-735 HD DP. Industrial Line. Automatic punch and bind machine for books and calendars PB-735 HD DP Automtic punch nd bind mchine for books nd clendrs A further step for the utomtion of double loop binding. A clever nd flexible mchine ble to punch nd bind in line up to 9/16. Using the best

More information

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR):

Kirchhoff s Rules. Kirchhoff s Laws. Kirchhoff s Rules. Kirchhoff s Laws. Practice. Understanding SPH4UW. Kirchhoff s Voltage Rule (KVR): SPH4UW Kirchhoff s ules Kirchhoff s oltge ule (K): Sum of voltge drops round loop is zero. Kirchhoff s Lws Kirchhoff s Current ule (KC): Current going in equls current coming out. Kirchhoff s ules etween

More information

UPTOWN CANOPY FRAME T/F/Q

UPTOWN CANOPY FRAME T/F/Q UPTOWN CANOPY FRAM T/F/Q Dte: 30 Mr 16 www.pbteen.com Pge 1 of 12 mportnt Sfety nstructions: Plese red ll instructions crefully before ssembling. For your sfety, ssembly by two or more dults is strongly

More information

388 SQUARE BASE TIME DELAY RELAYS

388 SQUARE BASE TIME DELAY RELAYS 3 SQURE SE TIME DELY RELYS "ON" OR "OFF" DELY FUNCTIONS EXTERNL RESISTNCE DJUSTLE ± 3 % REPETILITY DPDT, 2 MP File No. E52 IEC STNDRDS -- ND -5- LOW VOLTGE DIRECTIVE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION

More information

RemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA

RemoteTeller SYSTEM - RTS VAT 21 GX CUSTOMER UNIT COMPONENTS CUSTOM DESIGNED CUSTOMER AREA SEND SEND CLL CLL L " LCD COLOR MONITOR 4-29- COLOR CCD CMER 4-29- 486G VT 2 GX CUSTOMER UNIT CLL -8-999-6 LISTINGS ND PPROVLS CLSSIFIED TO UL 4R SFETY OF INFORMTION TECHNOLOGY EQUIPMENT UL TESTED TO THE

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system) Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)

More information

We can supply the following Types of Tap with All STANDARD s like ISO, BS, DIN, JIS, ANSI etc. Spiral Point. Right & Left Hand Slow helix 0 0

We can supply the following Types of Tap with All STANDARD s like ISO, BS, DIN, JIS, ANSI etc. Spiral Point. Right & Left Hand Slow helix 0 0 TAP MANUFACTURING MIRANDA Ground Tps will be supplied in M, M5, M Grde of HSS. Tps of di 7. & below will be supplied with externl (mle) center on both side or chmfer t Shnk side. And di nd bove will be

More information

& Y Connected resistors, Light emitting diode.

& Y Connected resistors, Light emitting diode. & Y Connected resistors, Light emitting diode. Experiment # 02 Ojectives: To get some hndson experience with the physicl instruments. To investigte the equivlent resistors, nd Y connected resistors, nd

More information

CHAPTER 2 LITERATURE STUDY

CHAPTER 2 LITERATURE STUDY CHAPTER LITERATURE STUDY. Introduction Multipliction involves two bsic opertions: the genertion of the prtil products nd their ccumultion. Therefore, there re two possible wys to speed up the multipliction:

More information

The Trade Fittings Product Guide

The Trade Fittings Product Guide The Trade Fittings Product Guide 6/7 Empire Centre Watford Herts WD24 4YH 01923 233330 www.brandsofwatford.co.uk Introduction Welcome to the new edition of our Fittings Product Guide. This edition gives

More information

Incremental encoders Solid shaft with square flange pulses per revolution

Incremental encoders Solid shaft with square flange pulses per revolution Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce

More information

Math Circles Finite Automata Question Sheet 3 (Solutions)

Math Circles Finite Automata Question Sheet 3 (Solutions) Mth Circles Finite Automt Question Sheet 3 (Solutions) Nickols Rollick nrollick@uwterloo.c Novemer 2, 28 Note: These solutions my give you the nswers to ll the prolems, ut they usully won t tell you how

More information

TEE-STL BLK 1/2" (SCH 80) TEE-STL BLK 1/2" REGULATOR-TWO STAGE REGULATOR-TWO STAGE

TEE-STL BLK 1/2 (SCH 80) TEE-STL BLK 1/2 REGULATOR-TWO STAGE REGULATOR-TWO STAGE RELESE TE WG 00-0-000 PIPE-STL LK /" (SH 0) ZONE ISION REOR TE FTR-ORIG 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" (SH 0) 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" 00-0-000 PIPE-STL

More information

DRAWER BASE DRAWING TABLE

DRAWER BASE DRAWING TABLE MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED B UPD STEP 1 NME ECN NO. : : : DIMENSION RE IN INCHES 1 OF 10 K:\DIVERSIFIED\\CD\.dwg, 9/25/2018 9:04:08 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1

More information

Products no longer available

Products no longer available echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck

More information

Rectangular type APS-10 to 15 Series

Rectangular type APS-10 to 15 Series Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting

More information

''Violet'' drill series.

''Violet'' drill series. 0. Updte B00G NEW SIZES VA-PDS VA-PDM VIOLET SERIES, HIGH PRECISION DRILLS VA-PDS VA-PDM VA-PDS-SUS VA-PDM-SUS A new stndrd for high precision drills! ''Violet'' drill series. Stble, long life Consistent

More information

SAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use

SAMPLING S Y S T E M S. w w w. s a m p l i n g. c o m. Label Solutions. Labels for Production and Quality Control use w w w. s m p l i n g. c o m Lbel Solutions 2017 Lbels for Production nd use SYSTEMS Which type lbel is right for me? Smpling Systems fer two types stndrd lbel bcking: Ultr Ahesive Lbels PhrmLbels 1. Ultr

More information

Example. Check that the Jacobian of the transformation to spherical coordinates is

Example. Check that the Jacobian of the transformation to spherical coordinates is lss, given on Feb 3, 2, for Mth 3, Winter 2 Recll tht the fctor which ppers in chnge of vrible formul when integrting is the Jcobin, which is the determinnt of mtrix of first order prtil derivtives. Exmple.

More information

IIHS LATCH Measurement Tool Set Drawings REV1. iihs.org

IIHS LATCH Measurement Tool Set Drawings REV1. iihs.org IIHS LTCH Measurement Tool Set Drawings REV1 iihs.org REV. DESCRIPTION DTE BY DD STORGE CSE. CHNGE IIHS LOGO. 2/1/2017 RGJ LTCH FORCE TOOL WITH DEPTH SHIELD SHEET 3-4, 9 WGNER INSTRUMENTS FDX100 WWW.WGNERINSTRUMEMTS.COM

More information

MODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS

MODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH H HOLDER ARMS MODEL POWERGLIDE SERIES INSTRUTIONS FOR INSTLLING SRGENT LOSERS WITH "H" HOLDER S SERIES NON SIZED DJUSTLE SIZES THRU 6 UTION: FILURE TO INSTLL OR DJUST PROPERLY MY RESULT IN INJURY OR DMGE. FOR SSISTNE,

More information

SOLVING TRIANGLES USING THE SINE AND COSINE RULES

SOLVING TRIANGLES USING THE SINE AND COSINE RULES Mthemtics Revision Guides - Solving Generl Tringles - Sine nd Cosine Rules Pge 1 of 17 M.K. HOME TUITION Mthemtics Revision Guides Level: GCSE Higher Tier SOLVING TRIANGLES USING THE SINE AND COSINE RULES

More information

Reversible and Proportional Electric Actuators

Reversible and Proportional Electric Actuators Reversible nd Proportionl Electric s The MP s re used for two-position, floting, nd proportionl control of dmpers, vlves, nd progrm switches in heting, ventiltion, nd ir conditioning pplictions or similr

More information

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)

Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type) ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In

More information

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 3 2 4 5 1. SEE SHIPPING INSTRUCTIONS

More information

TP Series - Triple PV Top of Pole Solar LED Lighting System

TP Series - Triple PV Top of Pole Solar LED Lighting System TP Series - Triple PV Top of Pole Solr LED Lighting System Instlltion Mnul MKTG-TP34-02-EN-1113 Instlltion Mnul TP Series Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion

More information

MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS

MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS MECHNICL RF STT FOR GREENSTR HE, SiII & i JUNIOR MODELS INSTRUCTION MNUL FITTING & OPERTING INSTRUCTIONS CONTCT INFORMTION MNUL INFORMTION WORCESTER OSCH: TECHNICL: 08705 4 SERVICE: 08547 50 SPRES: 0905

More information

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING DESCRIPTION ISION DTE EDITED BY ECO# D UPDTED BOM ISIONS, REMOVED PGE 3 04/24/2014 TS 00649 E UPDTED BOM ISION 10/09/2014 00663 F UPDTED BOM ISIONS 11/24/2014 00673 1 2 3 1. SEE SHIPPING INSTRUCTIONS FOR

More information

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC

ABB STOTZ-KONTAKT. ABB i-bus EIB Current Module SM/S Intelligent Installation Systems. User Manual SM/S In = 16 A AC Un = 230 V AC User Mnul ntelligent nstlltion Systems A B 1 2 3 4 5 6 7 8 30 ma 30 ma n = AC Un = 230 V AC 30 ma 9 10 11 12 C ABB STOTZ-KONTAKT Appliction Softwre Current Vlue Threshold/1 Contents Pge 1 Device Chrcteristics...

More information

GEH-2024E Supersedes GEH INSTRUCTIONS MULTICONTACT AUXILARY RELAY. TYPE HFASl. www. ElectricalPartManuals. com. GENERAL fl ELECTRIC

GEH-2024E Supersedes GEH INSTRUCTIONS MULTICONTACT AUXILARY RELAY. TYPE HFASl. www. ElectricalPartManuals. com. GENERAL fl ELECTRIC INSTRUCTIONS MULTICONTACT AUXILARY RELAY TYPE HFASl GENERAL fl ELECTRIC E Supersedes 0 MULTICONTACT AUXILIARY RELAY TYPE HFASl DESCRIPTION The HFASl relys re instntneous, hinged-rmture, multi-contct, uxiliry

More information

PLEATED SCREEN INSTALLATION INSTRUCTIONS

PLEATED SCREEN INSTALLATION INSTRUCTIONS PLETED SCREEN INSTLLTION INSTRUCTIONS DOC-II-PLETED Rev. 3 THNK YOU FOR PURCHSING LaCNTIN DOORS. INSTLLTION OF LaCNTIN PLETED SCREEN SYSTEM PLESE RED INSTRUCTIONS CREFULLY EFORE SSEMLING SCREEN SYSTEM.

More information

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure

G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure Sfety Rely Unit G9 CSM_G9_DS_E The G9 Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s

More information

DIN ANSI Shark Line Material specific application taps. New products 2017

DIN ANSI Shark Line Material specific application taps. New products 2017 DIN ANSI Shrk Line Mteril specific ppliction tps New products 2017 SHARK LINE SHARK INTRODUCTION Dormer brnd mteril specific ppliction-bsed rnges DIN ANSI Shrk Tps fer high performnce nd process security.

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Multi Line 6 x8 255x193x203cm / 100 1 /2 x76 x80 Poly-Tex, Inc. PO Box 458 27725 Dnville Avenue Cstle Rock, MN 55010 We Site: www.poly-tex.com English - 69717 Hoy Greenhouse Service

More information

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING

NOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 56076 08//0 0066. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO PRT NUMBER DESCRIPTION QTY 550 HDS-LSX LIFT SUPERSTRUCTURE 5509

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl

More information

Joanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office

Joanna Towler, Roading Engineer, Professional Services, NZTA National Office Dave Bates, Operations Manager, NZTA National Office . TECHNICA MEMOANDM To Cc repred By Endorsed By NZTA Network Mngement Consultnts nd Contrctors NZTA egionl Opertions Mngers nd Are Mngers Dve Btes, Opertions Mnger, NZTA Ntionl Office Jonn Towler, oding

More information

Harmer Roof Drainage The Modulock Raised Deck Support Ranges

Harmer Roof Drainage The Modulock Raised Deck Support Ranges Modulock Rised Deck Supports - Introduction Hrmer Roof Dringe The Modulock Rised Deck Support Rnges Fully engineered, verstile, rised deck product rnges, Modulock Pedestl nd Modulock Uni-Ring, re idel

More information

* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions

* * 98/9949 CS 98/ Point Latch includes these additional parts. 1-Point Latch (LBL) Customer Service. Installation Instructions *23970734* 23970734 98/9949 CS 98/9949 Instlltion Instructions This instruction covers new instlltion of the 98/9949 conceled verticl device for hollow metl nd luminum doors. RF Also covered is the CS

More information

Steamhead Installation

Steamhead Installation Steamhead Installation Installation Manual For Tutorials and Troubleshooting visit www.thermasol.com/solutions From top: NTST-XX Traditional, NTSM-XX Modern, NTSC-XX Contemporary, NTSR-XX Regency OVER

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet EVC24A-MF Prmeterisle gloe vlve ctutor for 2-wy nd 3-wy gloe vlves Actuting force 2500 N Nominl voltge AC/DC 24 V Control modulting DC (0)2...10 V Vrile Nominl stroke 40 mm Actuting time

More information

ARK CHEVRON INSTALLATION GUIDE

ARK CHEVRON INSTALLATION GUIDE ARK CHEVRON INSTALLATION GUIDE THANK YOU FOR YOUR PURCHASE OF DUCHÂTEAU WALL COVERINGS. We recommend you hire n experienced finish crpenter or wood flooring instller to chieve qulity results with ll DuChâteu

More information

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE

TOOLS NEWS CRN ENDMILL FOR COPPER ELECTRODE TOOLS NEWS CN ENDMILL FO COPPE ELECTODE 007. Updte B00G Series expnsion, Corner dius type now included! A gret vriety of products. Totl sizes of 0 in 7 series. Copper Electrode End Mill Series CN Series

More information

Extremely small "footprint" and the highest circuit density available AK550. Front Wire Entry

Extremely small footprint and the highest circuit density available AK550. Front Wire Entry FIXED PRINTED CIRCUIT Tubulr Screw Clmp For use when stndrd size printed circuit terminl blocks re too lrge for vilble spce or where very smll circuit bord is utilized. Our new subminiture design offers

More information

0-50 (with Circulated Air) EHDF G C2 -Y -30 Direction Valve Rated Flow Series Number Type of Mounting. L/min.

0-50 (with Circulated Air) EHDF G C2 -Y -30 Direction Valve Rated Flow Series Number Type of Mounting. L/min. roportionl Electro-ydrulic Directionl nd Flow Control Vlves E SERIES hese vlves incorporte two control functions-flow nd direction-which simplify the hydrulic circuit composition nd therefore the cost

More information

Translate and Classify Conic Sections

Translate and Classify Conic Sections TEKS 9.6 A.5.A, A.5.B, A.5.D, A.5.E Trnslte nd Clssif Conic Sections Before You grphed nd wrote equtions of conic sections. Now You will trnslte conic sections. Wh? So ou cn model motion, s in E. 49. Ke

More information

EAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR

EAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR EAUZONE PLUS EPQ - QUINTESSE DESIGN WITH HINGED DOOR INSTALLATION PARTS LIST BRITISH PATENT NO:470778 MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 3886 (AFTER SALES) FAX:0454 388

More information

AL Series. Tropical Lighting System. Installation Manual

AL Series. Tropical Lighting System. Installation Manual AL Series Tropicl Lighting System Instlltion Mnul Importnt Notes nd Wrnings This instlltion nd instruction mnul provides instlltion instructions for the Sol Tropicl Lighting System (AL) Series solr LED

More information

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a

Tubing Spacers. Backing Plate. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a. a a a. a a. a a Grnd Slm Instlltion Instructions TACO Metls Inc., 98 NE 179th Street Mimi, Florid 33162 hndyhnk@tcomrine.com tcomrine.com This Box Contins: 1- Port side Grnd Slm 1- Strbord side Grnd Slm 4-5/16 x 1 stinless

More information

Aluminium Roof Outlets - Introduction to Detail Outlets

Aluminium Roof Outlets - Introduction to Detail Outlets Aluminium Roof Outlets - Introution to Detil Outlets The Hrmer Roof Detil rnge inlues outlets to over ll the wkwr etiling situtions tht our in uiling esign n in refurishment. Min Chrteristis Hrmer Roof

More information

10.4 AREAS AND LENGTHS IN POLAR COORDINATES

10.4 AREAS AND LENGTHS IN POLAR COORDINATES 65 CHAPTER PARAMETRIC EQUATINS AND PLAR CRDINATES.4 AREAS AND LENGTHS IN PLAR CRDINATES In this section we develop the formul for the re of region whose oundry is given y polr eqution. We need to use the

More information

G2, G3 NPT Screwed Globe Control Valves

G2, G3 NPT Screwed Globe Control Valves 4-0000. INSTUCTION MNUL G, G NPT Screwed Globe Control Vlves G (S) Series NPT Screwed Globe Vlves Technicl Dt G G...S Service chilled or hot wter, 6 glycol, stem Flow chrcteristic modifi ed equl percentge

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

Ultrasonic Level Measurement DU 60 Z and DU 61 Z Sensors

Ultrasonic Level Measurement DU 60 Z and DU 61 Z Sensors Technicl Informtion TI 9F//en Ultrsonic Level Mesurement DU 6 Z nd DU 6 Z Sensors Modulr design, corrosion-resistnt Approved for explosion hzrdous res DU 6 Z Mesuring rnge pprox. m DU 6 Z Mesuring rnge

More information

Notice for TAIYO YUDEN Products

Notice for TAIYO YUDEN Products Notice for AIYO YUDEN Products [ For Generl Electronic Equipment (Generl Environment) ] Plese red this notice efore using the AIYO YUDEN products. REMINDERS Product informtion in this ctlog is s of Octoer

More information

QMA. Features. Product Range

QMA. Features. Product Range 8 Interfce Dimensions Code 28 REFERENCE PLANE Referenzeene REFERENCE PLANE Referenzeene ø 5.57 MAX. 9.035 MIN. 9. MALE Stecker FEMALE Kuppler Fetures Interfce ccording to QLF (Quick Lock Formul) Frequency

More information

Fusible Thin Film Chip Resistor

Fusible Thin Film Chip Resistor Fusile Thin Film Chip Resistor M25SI fusile thin film chip resistors re designed for overlod protection in modern professionl electronics. Typicl pplictions include utomotive, telecommuniction nd industril

More information

CABLE MANAGEMENT. Parts List

CABLE MANAGEMENT. Parts List CABLE MANAGEMENT Prts List CONTENTS PARTS LIST 1 Dt Trunking 03 1.1 COMPACT dt 140x50mm 04 1.2 PROFILA dt 180x65mm 07 1.3 Antimicroil Trunking - COMPACT Dt 11 1.4 Antimicroil Trunking - PROFILA Dt, 13

More information

Student Book SERIES. Fractions. Name

Student Book SERIES. Fractions. Name D Student Book Nme Series D Contents Topic Introducing frctions (pp. ) modelling frctions frctions of collection compring nd ordering frctions frction ingo pply Dte completed / / / / / / / / Topic Types

More information

THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS. Matej BEZNÁK, Vladimír HANZEN, Ján VRABEC

THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS. Matej BEZNÁK, Vladimír HANZEN, Ján VRABEC THE STUDY OF INFLUENCE CORE MATERIALS ON TECHNOLOGICAL PROPERTIES OF UNIVERSAL BENTONITE MOULDING MATERIALS Mtej BEZNÁK, Vldimír HANZEN, Ján VRABEC Authors: Mtej Beznák, Assoc. Prof. PhD., Vldimír Hnzen,

More information

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center

The Math Learning Center PO Box 12929, Salem, Oregon Math Learning Center Resource Overview Quntile Mesure: Skill or Concept: 300Q Model the concept of ddition for sums to 10. (QT N 36) Model the concept of sutrction using numers less thn or equl to 10. (QT N 37) Write ddition

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet RF24-MF-O Communictive rotry ctutor with emergency control function for ll vlves Nominl torque 2.5 Nm Nominl voltge AC/DC 24 V Control Modulting DC ()2...1 V Position feedck DC 2...1 V

More information

EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS

EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS EAUZONE PLUS EPH - HINGED DOOR WITH HINGE PANEL FOR RECESS INSTALLATION PARTS LIST BRITISH PATENT NO. 2470778 EPH MATKI PLC, CHURCHWARD ROAD, YATE, BRISTOL, BS37 5PL TELEPHONE:0454 32886 (AFTER SALES)

More information

Synchronous Machine Parameter Measurement

Synchronous Machine Parameter Measurement Synchronous Mchine Prmeter Mesurement 1 Synchronous Mchine Prmeter Mesurement Introduction Wound field synchronous mchines re mostly used for power genertion but lso re well suited for motor pplictions

More information

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v mc profile Mcintosh 10.5-10.10 Configurtion Guide Adoe Photoshop CS/CC Swgrss Virtuoso SG400/SG800 v20150427 Configurtion Guide - Photoshop CS/CC Swgrss SG400/800 Before proceeding, ensure the correct

More information

SHEET 1 OF 5 REVISIONS SYS DESCRIPTION DATE APPROV SPRING CUP STUD TOLERANCES ON DIMENSIONS UNLESS OTHERWISE SPECFIED X = 2 X/X = 1/32 PART NO.

SHEET 1 OF 5 REVISIONS SYS DESCRIPTION DATE APPROV SPRING CUP STUD TOLERANCES ON DIMENSIONS UNLESS OTHERWISE SPECFIED X = 2 X/X = 1/32 PART NO. C3501-241659 E SHEET 1 OF 5 SYS DESCRIPTION PPROV.375 + -.008.002 SPRING CUP STUD.050.281 MIN..215 -.000.003.255 ±.002.050 SLOT DEPTH W/ 1.375 R. NOTES: 1. STUD -.I.S.I. 4037, C1118, C1117, OR 8620 STEEL.

More information

Connection Technology

Connection Technology Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *

More information

EY-AM 300: novanet BACnet application master, modunet300

EY-AM 300: novanet BACnet application master, modunet300 Product dt sheet 96.010 EY-AM 300: novnet BACnet ppliction mster, modunet300 How energy efficiency is improved Open communiction for interoperle opertion of the entire optimised plnt. Fetures Prt of the

More information

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA

GEI E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53. GE Protection and Control 205 Great Valley Parkway Malvern, PA GEI-6871 9E INSTRUCTIONS M ULTI-CONTACT AUXILIARY RELAYS TYPE HFA53 GE Protection nd Control 205 Gret Vlley Prkwy Mlvern, PA 19355-1337 2 for Semi-flush Mounting (Front View) Connected Rely with Flnge

More information

NOTE THAT THE HANDLE IS BELOW THE LOCK BASE

NOTE THAT THE HANDLE IS BELOW THE LOCK BASE NOTE THT THE POSITION OF STOP IS LOCTED USING THE SINGLE HOLE S PLCEMENT GUIDE. NOTE THT THE HNDLE IS ELOW THE LOCK SE DETIL G SCLE.5. OF CHNGE DTE SIGN RELESED FOR PRODUCTION // RQ G SEE SHEET 3 FOR P/N

More information

Series AE W PFC INDUSTRIAL POWER SUPPLY

Series AE W PFC INDUSTRIAL POWER SUPPLY FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry

More information

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation. Section I - Instlltion Preprtion Prt Numer: 0854-53830 Section I - Instlltion Preprtion Kit Contents 3 Description Front spoiler Hrdwre g Instruction mnul Additionl Items Required For Instlltion Conflicts

More information

MSRS90. Notched Inserts Reduce Cutting Forces When Entering the Workpiece Stable Machining without Chattering

MSRS90. Notched Inserts Reduce Cutting Forces When Entering the Workpiece Stable Machining without Chattering 90 Notched Inserts Reduce Cutting Forces When ntering the Workpiece tle Mchining without Chttering mooth Chip vcution Prevents Frcturing Cused y Biting Chips MGACOAT NANO For xtended Tool Life igh Mchining

More information

001CK CK0012 FR-001CK0013 FR EN English

001CK CK0012 FR-001CK0013 FR EN English AUDIO ENTRY KIT FA00959EN 001DC00AC 001DC0EARY 7 10 001CS1PLCO INSTALLATION MANUAL 001CK0009 001CK001 FR001CK0013 FR EN English Generl Notes A Red the instructions crefully before beginning the instlltion

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet SF24G-MF-L Prmeterisle spring-return ctutor with emergency control function in the IP66 protective housing for djusting dmpers in industril plnts nd in technicl uilding instlltions Air

More information

Pro Series White Toner and Neon Range

Pro Series White Toner and Neon Range Pro Series White Toner nd Neon Rnge Discover New Dimension in Colour printing for grment decortion, signge nd design Pro7411WT White Toner (CMYW) A4 printer Pro8432WT White Toner (CMYW) A3 printer Pro6410

More information

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency

Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency echnicl dt sheet NMC24A-MF Prmeterisle dmper ctutor for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 2 m² Nominl torque Nm Nominl voltge AC/DC 24 V Control Modulting DC ()2...

More information

WETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850

WETROOM WALK-IN AWL1500 AWL1200 AWL900 AWC850 WETROOM WALK-IN AWL500 AWL00 AWL900 AWC850 INSTALLATION PARTS LIST MODEL: AWL500 AWL00 AWL 900 MODEL: AWL500 + AWC850 AWL00 + AWC850 AWL 900 + AWC850 03 AF /6 IMPORTANT Before disposing of crton nd/or

More information

RELEASE 5/11/2010 ELBOW-BLK-1/2X TEE-STL BLK-1/ NIPPLE-PIPE,STL BLK NIPPLE-PIPE,STL BLK

RELEASE 5/11/2010 ELBOW-BLK-1/2X TEE-STL BLK-1/ NIPPLE-PIPE,STL BLK NIPPLE-PIPE,STL BLK ELOW-LK-/X90 00-0-000 RELESE ZONE TE ISION REOR WG 9 TE FTR-ORIG TEE-STL LK-/ 00-0-000 NIPPLE-PIPE,STL LK 009-0-000 0 0 99 NIPPLE-PIPE,STL LK 009-0-000 ELOW-LK-/X90 00-0-000 PTER-RSS-/FX/ 009-0-000 TEE-STL

More information

PLANNING & LAYOUT BENCH

PLANNING & LAYOUT BENCH MODEL VIEWS MY NOT REPRESENT EXCT MODEL PURCHSED : : : LL VLUES ± OVERLL CRETED 1 OF 5 K:\DIVERSIFIED\\CD\.dwg, 11/30/2015 9:58:11 M, DWG To PDF.pc3 TOOLS REQUIRED 1 2 " WRENCH 1 2 " SOCKET ND TORQUE WRENCH

More information