Abrasives, Additives and Compound. for processing in vibratory finishing equipment. Consumables

Transcription

1 Deburring - Rounding - Grinding - Smoothing - Polishing Abrsives, Additives nd Compound for processing in vibrtory finishing equipment

2 Cermic (KE)- nd plstic bonded (KS) medi re defined by their shpe, grinding effect, grinding pttern nd size. Mteril/Form Cermic: D Tringle Grinding Effect 00 polishing Grinding Pttern smooth 0 Grinding Medi DS DSE KU DZ DZS Z ZS Tringle Angle Cut Tringle Angle Cut extreme Bll Dreizck Dreizck Schrägschnitt Angle Cut smoothing finest grinding fine grinding grinding Plstic: KE Cone strong grinding P TS Pyrmid ultr strong grinding PA Prboloid b 90 extremly strong grinding rough 9 Order exmple: KE-D /25 (KE = mteril; D = shpe; 46 = grinding effect; 5 = grinding pttern; 25/25 = size in mm)

3 Cermic Medi D Tringle 2/2 to 25/25 DS Tringle Angle Cut* 4/4 to 25/25 DSE Tringle Angle Cut extreme** 2/2 to 6/6 KU Bll 1 to 25 DZ 2/2 to 10/10 DZS Angle Cut* 4/4 to 15/18 Z Cylinder 1,5/5 bis 15/30 ZS Cylinder Angle Cut* 1,5/5 bis 15/30 Cermic Medi Further dimensions nd qulities on request *Angle Cut **Angle Cut 50-70

4 Plstic Medi KE Cone 6 to 50 P Pyrmid 5 to 50 Plstic Medi TS 20 to 50 PA Prboloid 20 to 50 Further dimensions nd qulities on request

5 Stinless Steel Medi (wet process) - polishing nd smoothing effect - vrious shpes MS-KU Bll 2 bis 5 MS-SAT Stellite 3/5 MS-NAD Needle 0,3; 0,5; 1,5 Stinless Steel Medi Wooden Polishing Medi (dry process) - polishing nd smoothing effect - vrious shpes HT Trpeze 4-12 HW Cube 4-16 Wooden Polishing Medi

6 Grnulte for Dry Polishing Nutshell Grnulte WN-P WN-S WN-U* Grnultion polishing grinding not impregnted Very corse 30 (4-6 mm) (4-6 mm) corse 50 (2,4-4 mm) 50 (2,4-4 mm) 50 (2,4-4 mm) Less corse 100 (1,7-2,4 mm) 100 (1,7-2,4 mm) 100 (1,7-2,4 mm) Grnulte Medium corse Less fine Fine Very fine 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) 200 (1,3-1,7 mm) 300 (0,8-1 mm) 400 (0,4-0,8 mm) 500 (0,2-0,4 mm) Mize Grnulte MAS Grnultion impregnted not impregnted -- 1,7-2,2 mm Corse -- 1,1-1,6 mm -- 0,8-1,8 mm Medium 0,4-0,8 mm 0,4-0,8 mm Fine 0,2-0,4 mm 0,2-0,4 mm * Impregntion with grinding or polishing pste necessry before use

7 Plstic Grnulte Cermic Grnulte White Corundum GUU 0,25 to 0,5 mm GU 0,5 to 5,8 mm ZO 0,210 to 0,420 mm Grnulte Additives Anti dhesion blls Prevent sticking nd pcking of extremely flt nd thin workpieces Degresing compound Flocculnt Defomer Polishing pste, Brillince crem For oil- nd greseless pieces during processing in mss finishing mchines Orgnic splitting gents for supportive/enhnced wter purifiction of oil-contminted wste wter Silicone nd silicone-free defomer for queous systems. Excellent long term effect in fully synthetic KSS s well s in emulsions without negtive effects on emulsion stbility For high-qulity surfces nd corrosion protection in conjunction with nut shell grnulte nd wooden polishing medi Additives Adhesive-/shining oil Grinding pste Appliction in conjunction with grnulte nd polishing powder for enhnced substrte dhesion; relubriction of dry grnulte Roughening of lredy smoothened brsives, increse of grinding efficiency Further dimensions nd qulities on request

8 Bsiclly, ny compound cn be used for ny metl. For metls sensitive to rust, plese observe the corrosion protection. The prticulrly good suitbility nd properties of the individul compounds re indicted. Grinding Compound VF VF VF grinding / deburring / smoothing produces homogeneous surfce, suitble for circultion grinding / deburring / smoothing brightening effect, not suitble for circultion grinding / deburring / smoothing temporry corrosion protection, suitble for circultion PH-Vlue (1-%ige Lösung) Brss, Copper 7,1 Light Metl, Non- 3,6 Ferrous Metl, Stinless Steel Steel, Iron 10 Grinding Compound / Polishing Compound Compound VF VF VF grinding / smoothing / polishing brightening effect, temporry corrosion protection, not suitble for circultion Light Metl, Non- Ferrous Metl, Stinless Steel Plstic grinding / smoothing / polishing All Metls (Steel 8,8 low brightening effect, hrdly ny colour chnge of limited suitbility) the workpieces, suitble for high-gloss polishing of luminium, silver nd gold, conditionl corrosion protection, Aluminium, Slver nd Gold suitble for circultion grinding / smoothing / polishing All Metls 9,7 brightening effect, suitble for high gloss polishing (especilly for copper, stinless steel nd brss), recommendtion: mixture from 2%, high temporry corrosion protection, suitble for circultion 7,8 Polishing Compound VF VF smoothing / polishing / high-gloss polishing no brightening effect, no colour chnge of the workpieces, recommendtion: mixture from 2%, not suitble for circultion smoothing / polishing / mirror finishing brightening effect, recommendtion: mixture from 3%, temporry corrosion protection, suitble for circultion All Metls (except Steel) All Metls, especilly for Gold nd Silver 3,6 7,5 Subject to technicl chnges Avtec GmbH Erik-Numnn-Str Sindelfingen Tel info@vtec.de