Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces

Size: px
Start display at page:

Download "Metal 3in1. Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces"

Transcription

1 Applied directly to rust A smooth gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation, yellowing and adverse weather conditions Strong adhesion even when applied directly to rusty metal surfaces High covering power and ease of application Delivery time for the painting project is considerably shorter, as no primer is required, surfaces can be recoated after 24 hours and paint is thinned with a paintbrush thinner (KRAFT White Spirit) without shrinking any former conventional paints It creates a smooth high-gloss finish A special high-gloss solvent-based paint for interior and exterior use. It can be applied directly to rusty surfaces without requiring minium or an anti-rust metal primer. Thanks to the special innovative composition of its resins and pigments, it inactivates rust and protects metal surfaces from corrosion caused by humidity, ultraviolet radiation and adverse weather conditions. Resistant to yellowing, it gives a smooth gloss finish. It retains its gloss and colour over a long period. For effective rust protection, the final dry film thickness must be more than 110Ìm, so at least two coats of paint are required.. Low volatile organic compound (VOC) product Ease of workability Even spreading Effective protection MADE IN E.U. DRUCKFARBEN HELLAS AEBEE, ASPROPYRGOS ATTIKI, GREECE TEL: Contact / Order Line: (free of charge)

2 Surface Preparation & Application To ensure proper adhesion, the surface must be dry, clean and free of dust, fat, grease, salt, loose paint / rust, scale / patina, etc. Any preliminary work on painted surfaces in the form of fine sanding, flame cleaning, etc. may produce dangerous dust or spray mist. Work in a well ventilated area. Do not fail to use appropriate personal protective equipment. Filling / patching primed iron surfaces: The acrylic putty KRAFT SPACHTEL is recommended. On rusty metal surfaces: First, remove any loose rust or paint with a wire brush, clean and apply 2-3 coats of KRAFT METAL 3 in 1 SMOOTH GLOSS. On galvanised, zinc, aluminium, bronze, chrome or copper surfaces: fine sanding of patina, 1 coat of KRAFT RUST BLOCKER AQUA, and after 12 hours 2 coats of KRAFT METAL 3 in 1 SMOOTH GLOSS To ensure maximum rust protection in coastal or northern areas, it is recommended to apply 2 coats of KRAFT RUST BLOCKER AQUA first. eyes, rinse immediately with plenty of water and seek medical advice. In case of ingestion, seek medical advice immediately and show container or label. Toxic to aquatic organisms. It may cause long-term adverse effects in the aquatic environment. Do not empty remaining contents into drains or other water sources. Disposal of materials must be carried out responsibly and in accordance with applicable legislation. For more information, please refer to the Material Safety Data Sheet for this product. It contains ethyl methyl ketoxime and 2- ethylhexanoic cobalt. It may cause an allergic reaction. Poison Centre Tel.: Storage Store product at temperatures between 5ÆC and 35ÆC and at a humidity rate < 50%. Keep cans hermetically closed. Paint Application Instructions Tools: paintbrush or roller (Ripolin), air or airless spray gun Cleaning: Immediately after use, clean tools and any paint residues with KRAFT Brush Thinner. Thinning: Paintbrush or roller: up to 10% by volume with KRAFT Brush Thinner Air spray gun: up to 13% by volume with Airless spray gun: up to 5% by volume with Dry to touch: 4-6 hours Dry to recoat, minimum: 24 hours Stir well before use and during application. Do not apply at temperatures below 5ÆC and above 35ÆC as well as at relative humidity levels above 65%. Pack Size Available in white, black and Index colours in 0.75lt and 2.5lt containers Instructions for Safe Use Flammable. Keep out of the reach of children. Use only in a well ventilated area. Do not inhale spray mist. Avoid contact with skin and eyes. Prolonged exposure may cause skin dryness or cracking. In case of contact with skin, wash off immediately with soap and water or with a suitable skin cleaner. In case of contact with Special one-component coatings (SB) (A/i) Phase I limit value: 600 gr/lt Phase II limit value: 500 gr/lt Maximum content of VOC of the product in a ready-to-use condition: 499 gr/lt Technical Characteristics Specific Gravity (Kg/l) (±0.02) Viscosity (cp) Solids by Volume (%) Specular Gloss (60Æ) White Colour Coordinates Theoretical Coverage (m 2 /l) Minimum Dry Film Thickness required (Ìm) Flash Point Shelf Life White 1.25 Black 1.01 Grey 1.22 Cypress Green 1.05 Brown 1.06 Yellow 1.09 Red 1.04 Blue 1.05 Mykonos Blue 1.01 Claret 1.04 Green ± 2 {ISO 3251} 90 L>95 b<2 4-5* (2 coats) {ISO 6504} >110 28ÆC {DIN 53213} at least 1 year * depending on painting conditions and application method

3 Applied directly to rust A metallic gloss anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation, discoloration and adverse weather conditions Strong adhesion even when applied directly to rusty metal surfaces High covering power and ease of application Delivery time for the painting project is considerably shorter, as no primer is required, surfaces can be recoated after 24 hours and paint is thinned with a paintbrush thinner (KRAFT White Spirit) without shrinking any former conventional paints It creates a metallic gloss finish A special metallic-finish solvent-based gloss paint for interior and exterior use. It can be applied directly to rusty surfaces without requiring minium or an anti-rust metal primer, giving a metallic surface. Thanks to the special innovative composition of its resins and pigments, it inactivates rust and protects metal surfaces from corrosion caused by humidity, ultraviolet radiation and adverse weather conditions. Resistant to yellowing, it gives a metallic gloss finish. It retains its gloss and colour over a long period. For effective rust protection, the final dry film thickness must be more than 110Ìm, so at least two coats of paint are required. Low volatile organic compound (VOC) product Ease of workability Even spreading Effective protection MADE IN E.U. DRUCKFARBEN HELLAS AEBEE, ASPROPYRGOS ATTIKI, GREECE TEL: Contact / Order Line: (free of charge)

4 Surface Preparation & Application To ensure proper adhesion, the surface must be dry, clean and free of dust, fat, grease, salt, loose paint / rust, scale / patina, etc. Any preliminary work on painted surfaces in the form of fine sanding, flame cleaning, etc. may produce dangerous dust or spray mist. Work in a well ventilated area. Do not fail to use appropriate personal protective equipment. Filling / patching primed iron surfaces: The acrylic putty KRAFT SPACHTEL is recommended. On rusty metal surfaces: First, remove any loose rust or paint with a wire brush, clean and apply 2-3 coats of KRAFT METAL 3 in 1 METALLIC GLOSS. On galvanised, zinc, aluminium, bronze, chrome or copper surfaces: fine sanding of patina, 1 coat of KRAFT RUST BLOCKER AQUA, and after 12 hours 2 coats of KRAFT METAL 3 in 1 METALLIC GLOSS To ensure maximum rust protection in coastal or northern areas, it is recommended to apply 2 coats of KRAFT RUST BLOCKER AQUA first. Paint Application Instructions Tools: paintbrush or roller (Ripolin), air or airless spray gun Cleaning: Immediately after use, clean tools and any paint residues with KRAFT Brush Thinner. Thinning: Paintbrush or roller: up to 5% by volume with KRAFT Brush Thinner Air spray gun: up to 5% by volume with Airless spray gun: up to 5% by volume with Dry to touch: 4-6 hours Dry to recoat, minimum: 24 hours Stir well before use and during application. Do not apply at temperatures below 5ÆC and above 35ÆC as well as at relative humidity levels above 65%. Pack Size Available in Index colours in 0.75lt containers Instructions for Safe Use Flammable. Keep out of the reach of children. Use only in a well ventilated area. Do not inhale spray mist. Avoid contact with skin and eyes. Prolonged exposure may cause skin dryness or cracking. In case of contact with skin, wash off immediately with soap and water or with a suitable skin cleaner. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of ingestion, seek medical advice immediately and show container or label. Toxic to aquatic organisms. It may cause long-term adverse effects in the aquatic environment. Do not empty remaining contents into drains or other water sources. Disposal of materials must be carried out responsibly and in accordance with applicable legislation. For more information, please refer to the Material Safety Data Sheet for this product. It contains ethyl methyl ketoxime and 2- ethylhexanoic cobalt. It may cause an allergic reaction. Poison Centre Tel.: Storage Store product at temperatures between 5ÆC and 35ÆC and at a humidity rate < 50%. Keep cans hermetically closed. Special one-component coatings (SB) (A/i) Phase I limit value: 600 gr/lt Phase II limit value: 500 gr/lt Maximum content of VOC of the product in a ready-to-use condition: 499 gr/lt Technical Characteristics Specific Gravity (Kg/l) (±0.02) Viscosity (cp) Solids by Volume (%) Theoretical Coverage (m 2 /l) Minimum Dry Film Thickness required (Ìm) Flash Point Shelf Life Carbon Grey 0.99 Silver 0.99 Grey Blue 0.99 Brick Red 1.01 Green 0.99 Copper 1.01 Gold ,5 ± 2 {ISO 3251} 4-5* (2 coats) {ISO 6504} ÆC {DIN 53213} at least 1 year * depending on painting conditions and application method

5 Applied directly to rust A metallic flat anti-rust enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation, discoloration and adverse weather conditions Strong adhesion even when applied directly to rusty metal surfaces High covering power and ease of application It creates a metallic flat textured enamel finish with excellent iridescence An alkyd metallic-finish, flat-gloss, solventbased paint for interior and exterior use. It can be applied directly to rusty surfaces without requiring minium or an anti-rust metal primer. Thanks to the special innovative composition of its resins and pigments, it inactivates rust and protects metal surfaces from corrosion caused by humidity, ultraviolet radiation and adverse weather conditions. Resistant to yellowing, it gives a metallic finish. It retains its gloss and colour over a long period. For effective rust protection, the final dry film thickness must be more than 110Ìm, so at least 2-3 coats of paint are required. Low volatile organic compound (VOC) product Ease of workability Even spreading Effective protection MADE IN E.U. DRUCKFARBEN HELLAS AEBEE, ASPROPYRGOS ATTIKI, GREECE TEL: Contact / Order Line: (free of charge)

6 Surface Preparation & Application To ensure proper adhesion, the surface must be dry, clean and free of dust, fat, grease, salt, loose paint / rust, scale / patina, etc. Any preliminary work on painted surfaces in the form of fine sanding, flame cleaning, etc. may produce dangerous dust or spray mist. Work in a well ventilated area. Do not fail to use appropriate personal protective equipment. Filling / patching primed iron surfaces: The acrylic putty KRAFT SPACHTEL is recommended. On rusty metal surfaces: First, remove any loose rust or paint with a wire brush, clean and apply 2-3 coats of KRAFT METAL 3 in 1 METALLIC FLAT. On galvanised, zinc, aluminium, bronze, chrome or copper surfaces: fine sanding of patina, 1 coat of KRAFT RUST BLOCKER AQUA, and after 12 hours 2 coats of KRAFT METAL 3 in 1 METALLIC FLAT To ensure maximum rust protection in coastal or northern areas, it is recommended to apply 2 coats of KRAFT RUST BLOCKER AQUA first. immediately with soap and water or with a suitable skin cleaner. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of ingestion, seek medical advice immediately and show container or label. Toxic to aquatic organisms. It may cause long-term adverse effects in the aquatic environment. Do not empty remaining contents into drains or other water sources. Disposal of materials must be carried out responsibly and in accordance with applicable legislation. For more information, please refer to the Material Safety Data Sheet for this product. It contains ethyl methyl ketoxime and 2- ethylhexanoic cobalt. It may cause an allergic reaction. Poison Centre Tel.: Storage Store product at temperatures between 5ÆC and 35ÆC and at a humidity rate < 50%. Keep cans hermetically closed. Paint Application Instructions Tools: paintbrush or roller (Ripolin), air or airless spray gun Cleaning: Immediately after use, clean tools and any paint residues with KRAFT Brush Thinner. Thinning: Paintbrush or roller: up to 10% by volume with KRAFT Brush Thinner Air spray gun: up to 10% by volume with Airless spray gun: up to 5% by volume with Dry to touch: 4-6 hours Dry to recoat, minimum: 24 hours Stir well before use and during application. Do not apply at temperatures below 5ÆC and above 35ÆC as well as at relative humidity levels above 65%. Pack Size Available in Index colours in 0.75L containers. Instructions for Safe Use Flammable. Keep out of the reach of children. Use only in a well ventilated area. Do not inhale spray mist. Avoid contact with skin and eyes. Prolonged exposure may cause skin dryness or cracking. In case of contact with skin, wash off Special one-component coatings (SB) (A/i) Phase I limit value: 600 g/l Phase II limit value: 500 g/l Maximum content of VOC of the product in a ready-to-use condition: 499 g/l Technical Characteristics Specific Gravity (Kg/L) (±0.02) Viscosity (cp) Solids by Volume (%) Theoretical Coverage (m 2 /l) Minimum Dry Film Thickness required (Ìm) Flash Point Shelf Life Carbon Grey 1.43 Silver 1.42 Grey Blue 1.43 Brick Red 1.45 Green 1.43 Copper 1.47 Gold ,5 ± 2 {ISO 3251} 4-5* (2 coats) {ISO 6504} ÆC {DIN 53213} at least 1 year * depending on painting conditions and application method

7 Applied directly to rust An anti-rust wrought-surface enamel paint for metal surfaces It prevents humidity from penetrating, providing long-lasting rust protection Highly resistant to ultraviolet radiation, discoloration and adverse weather conditions Strong adhesion even when applied directly to rusty metal surfaces High covering power and ease of application It creates a gloss wrought finish An alkyd solvent-based paint for interior and exterior use. It can be applied directly to rusty surfaces, giving an appearance of wrought metal, without requiring minium or an anti-rust metal primer. Thanks to the special innovative composition of its resins and pigments, it inactivates rust and protects metal surfaces from corrosion caused by humidity, ultraviolet radiation and adverse weather conditions. Resistant to yellowing, it gives a wrought finish. It retains its gloss and colour over a long period and gives a wrought finish. For effective rust protection, the final dry film thickness must be more than 110Ìm, so at least 2-3 coats of paint are required. Low volatile organic compound (VOC) product Ease of workability Even spreading Effective protection MADE IN E.U. DRUCKFARBEN HELLAS AEBEE, ASPROPYRGOS ATTIKI, GREECE TEL: Contact / Order Line: (free of charge)

8 Surface Preparation & Application To ensure proper adhesion, the surface must be dry, clean and free of dust, fat, grease, salt, loose paint / rust, scale / patina, etc. Any preliminary work on painted surfaces in the form of fine sanding, flame cleaning, etc. may produce dangerous dust or spray mist. Work in a well ventilated area. Do not fail to use appropriate personal protective equipment. Filling / patching primed iron surfaces: The acrylic putty KRAFT SPACHTEL is recommended. On rusty metal surfaces: First, remove any loose rust or paint with a wire brush, clean and apply 2-3 coats of KRAFT METAL 3 in 1 WROUGHT. On galvanised, zinc, aluminium, bronze, chrome or copper surfaces: fine sanding of patina, 1 coat of KRAFT RUST BLOCKER AQUA, and after 12 hours 2 coats of KRAFT METAL 3 in 1 WROUGHT To ensure maximum rust protection in coastal or northern areas, it is recommended to apply 2 coats of KRAFT RUST BLOCKER AQUA first. Paint Application Instructions Tools: paintbrush or roller (Ripolin), air or airless spray gun Cleaning: Immediately after use, clean tools and any paint residues with KRAFT Brush Thinner. Thinning: Paintbrush or roller: up to 9% by volume with KRAFT Brush Thinner Air spray gun: up to 9% by volume with Airless spray gun: up to 5% by volume with Dry to touch: 1-2 hours Dry to recoat, minimum: 12 hours Stir well before use and during application. Do not apply at temperatures below 5ÆC and above 35ÆC as well as at relative humidity levels above 65%. Pack Size Available in Index colours in 0.75L and 2.5L containers Instructions for Safe Use Flammable. Keep out of the reach of children. Use only in a well ventilated area. Do not inhale spray mist. Avoid contact with skin and eyes. Prolonged exposure may cause skin dryness or cracking. In case of contact with skin, wash off immediately with soap and water or with a suitable skin cleaner. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of ingestion, seek medical advice immediately and show container or label. Toxic to aquatic organisms. It may cause long-term adverse effects in the aquatic environment. Do not empty remaining contents into drains or other water sources. Disposal of materials must be carried out responsibly and in accordance with applicable legislation. For more information, please refer to the Material Safety Data Sheet for this product. It contains ethyl methyl ketoxime and 2- ethylhexanoic cobalt. It may cause an allergic reaction. Poison Centre Tel.: Storage Store product at temperatures between 5ÆC and 35ÆC and at a humidity rate < 50%. Keep cans hermetically closed. Special one-component coatings (SB) (A/i) Phase I limit value: 600 g/l Phase II limit value: 500 g/l Maximum content of VOC of the product in a ready-to-use condition: 499 g/l Technical Characteristics Specific Gravity (Kg/l) (±0.02) Viscosity (cp) Solids by Volume (%) Theoretical Coverage (m 2 /l) Minimum Dry Film Thickness required (Ìm) Flash Point Shelf Life Silver 1,00 Gold 1,00 Copper 1,01 Cypress Green 1,03 Aegean Blue 1,01 Ionian Blue 1,00 Claret 1,03 Grey 1,00 Carbon Black 1,00 Almond Green 1, ,5 ± 2 {ISO 3251} 4-5* (2 coats) {ISO 6504} ÆC {DIN 53213} at least 1 year * depending on painting conditions and application method

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

NoFire A-18 NV Fire Protective Coating - General Application Procedure & Technical Data

NoFire A-18 NV Fire Protective Coating - General Application Procedure & Technical Data 21 Industrial Ave Upper Saddle River New Jersey 07458 Tel: 201-818-1616 Fax: 201-818-8775 E-mail: nofire@nofire.net Web Site: http://www.nofiretechnologies.com NoFire A-18 NV Fire Protective Coating -

More information

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY). Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as

More information

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner

Technical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal

More information

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required TECHNICAL DATA SHEET Version 1 2016 JULY THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION High quality interior or exterior enamel for surfaces where a glossy durable finish is required

More information

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology.

High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. Product Data Sheet High-quality, water-dilutable satin gloss enamel on the basis of a modified alkyd technology. ralstoncolour.com /picto Excellent outdoor resistance Excellent flow and optimal hiding

More information

SELECTION AND PREPARATION OF SUBSTRATES

SELECTION AND PREPARATION OF SUBSTRATES 592 TECHNICAL DATASHEET 7-538 / 7-539 SELEMIX DIRECT GLOSS TOPCOATS PRODUCT DESCRIPTION Selemix Direct Gloss are polyurethane coatings based on PU 2K technology, which can be applied direct onto substrates

More information

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications

Duraguard ULTRA PREMIUM MATT DATA SHEET FC Description & Uses. Features & Benefits. Colours. Environmental Data & Certifications PAGE 1 OF 5 Description & Uses Solver Duraguard Matt is an ultra premium quality, 100% acrylic, self priming exterior water-based coating, suitable for direct application to most surfaces including timber,

More information

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version:

PRODUCT GUIDE: WATERBORNE TOPCOATS. Version: PRODUCT GUIDE: WATERBORNE TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: CONTAINER GUARD QD BLACK PRODUCT: 4886-02 DESCRIPTION: CONTAINER GUARD QUICK DRY (QD) is an air-drying, water reducible

More information

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material.

Physical constants Finish: ASTM D Flash point: Rangan Far, s Adding thinner to a paint may change the flash point of the diluted material. Finish: The appearance of the paint film after drying under optimum conditions,- given as high gloss (>90), gloss (60-90), semi-gloss (30-60), semi-flat (15-30), or flat (

More information

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH

HAMMERITE DIRECT TO RUST HAMMERED AND SMOOTH TECHNICAL DATA SHEET Version 1 2016 June THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION A corrosion resistant and decorative coating for ferrous and nonferrous metals, wood and certain

More information

AquaCLAD Water-Reducible Rust Preventative Alkyd

AquaCLAD Water-Reducible Rust Preventative Alkyd AquaCLAD 1600 Water-Reducible Rust Preventative Alkyd A rust preventative coating for interior and exterior steel in mild to moderate industrial environment. Recommended For Features Refinish Market High

More information

Data Sheet 5741 Englisch

Data Sheet 5741 Englisch Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl

More information

SILICONE RESIN PAINT FOR MASONRY FACADES

SILICONE RESIN PAINT FOR MASONRY FACADES TIKKURILA SILICONE RESIN PAINT FOR MASONRY FACADES DESCRIPTION Water-borne silicone emulsion paint. RECOMMENDED USES Residential, commercial, industrial and storage buildings and others. PRODUCT FEATURES

More information

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version:

PRODUCT GUIDE: COMPLIANT TOPCOATS. Version: PRODUCT GUIDE: COMPLIANT TOPCOATS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA PRODUCT: 3.5 V.O.C FASTDRY, Black Product Number: 4899 DESCRIPTION: This product is a high gloss enamel for OEM finishing

More information

2K weather resistance clear coat A850

2K weather resistance clear coat A850 Clear coat Donglai Coating Technology (Shanghai) Co., Ltd. 2K weather resistance clear coat A850 Description High-build, two-component clear coat designed for universal application and optimal appearance

More information

Sketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days

Sketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²

More information

WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504)

WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) WEGTHANE HPA 501 (HPA 501/ HPA 502/ HPA 503/ HPA 504) PRODUCT DESCRIPTION: INTENDED USES: Bicomponent gloss aliphatic acrylic polyurethane finishing paint, with excellent durability and extended repainting.

More information

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.

Epoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments. Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining

More information

Magnetpaint & Sketchpaint

Magnetpaint & Sketchpaint Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint

More information

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials

Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Assessment Requirements Unit PO0205K Knowledge of Applying Fillers and Foundation Materials Content: The types of substrates likely to be found in vehicle refinishing a. List types of substrate to include:

More information

Product Data Sheet November 2016

Product Data Sheet November 2016 Product Data Sheet November 2016 INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY T8500V HP Chromate Free Epoxy Primer P580-3501/-3502/-3503/-3504 Product Description P580-3501 HP Chromate Free Epoxy Primer

More information

PRODUCT ADVICE SHEET

PRODUCT ADVICE SHEET PRODUCT ADVICE SHEET Full Gloss All Farrow & Ball paints are eco friendly with low or minimal VOC (Volatile Organic Compounds) content and are water based giving them a low odour and quick drying time

More information

Gloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours

Gloss Volume Solids 88 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 24 hours 12 hours 8 hours Max. 72 hours 24 hours 24 hours W-POXI DFA 301 PRODUCT DESCRIPTION: INTENDED USES: Bicomponent polyamine epoxy paint, of high thickness, being part of the class of Low VOC, being able to be applied in internal environments, closed or

More information

PercoTop PUR 2K MS Topcoat

PercoTop PUR 2K MS Topcoat Features is a 2K topcoat based on acrylic and polyester resins. It has an excellent mechanical and chemical resistance. The topcoat is easy to apply. 5 gloss levels: high gloss to matt. Products Base Paint

More information

Impredur Silk Matt Enamel 880

Impredur Silk Matt Enamel 880 Data Sheet Silk Matt Enamel 880 aromatics-free, premium quality, for exterior and interior use Field of Application Properties Material description Standard colors Gloss grade Base material For high-quality

More information

PRODUCT ADVICE SHEET

PRODUCT ADVICE SHEET PRODUCT ADVICE SHEET Estate Eggshell All Farrow & Ball paints are eco friendly with low VOC (Volatile Organic Compounds) content and are water based giving them a low odor and quick drying time which benefits

More information

SEA45 Water Borne Acrylic Gloss

SEA45 Water Borne Acrylic Gloss Water Borne Acrylic Gloss TECHNICAL DATA SHEET Product Description Components is a single pack, general purpose gloss finish. Applicable by brush or spray. Fast drying Water based, low VOC Excellent weather

More information

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS

UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS UNIT REF: PO0205K UNIT TITLE: KNOWLEDGE OF APPLYING FILLERS AND FOUNDATION MATERIALS Level: 2 Route: Knowledge Credit Value: 6 GLH: 45 Mapping: This unit is mapped to the IMI NOS PO2 and PO5 Rationale:

More information

PRODUCT GUIDE: CATALYZED PRIMERS. Version:

PRODUCT GUIDE: CATALYZED PRIMERS. Version: PRODUCT GUIDE: CATALYZED PRIMERS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy, and

More information

Paints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors

Paints for sheet-iron roofs. For corrosion protection of metal surfaces outdoors Paints for sheet-iron roofs For corrosion protection of metal surfaces outdoors 2 On roofs since 1964 Metallic roofing materials have been used for protecting the roofs of wooden houses since the 19th

More information

For purchasing information visit: Osmo Polyx Oil Rapid

For purchasing information visit: Osmo Polyx Oil Rapid The following Product Datasheet is provided by Osmo Wood Finishes Direct cannot be held liable for the information contained within this document. For purchasing information visit: Osmo Polyx Oil Rapid

More information

GEO-PAINT SUPER ACRYLIC PVA

GEO-PAINT SUPER ACRYLIC PVA 23 Poortman Street, Potchindustria, Potchefstroom, 2531 Tel.: (018) 293 2274 Fax: (018) 293 2287 GEO-PAINT SUPER ACRYLIC PVA DESCRIPTION: Geo-Paint super acrylic PVA is ideal for ceilings and walls. It

More information

Product Information PRIMA D839 2 Component Primer

Product Information PRIMA D839 2 Component Primer GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick

More information

Product Data Sheet Brite Red Aluminum

Product Data Sheet Brite Red Aluminum Product Data Sheet Rust Proof Any-way spray paint voc/carb mir: flat

More information

TECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE

TECHNICAL INFORMATION CLEAR CONCENTRATED INDUSTRIAL VARNISH BARNIZ INDUSTRIAL CONCENTRADO TRANSPARENTE DESCRIPTION is a single part, solvent-base wood finish, developed from alkyd resins. Fast Drying, beautiful shine and good leveling. USE Industrial and domestic use. Only for wood surfaces that will stay

More information

D'ECO' SMALTO SATINATO Urethane alkyd satin water polish for outdoor and indoor

D'ECO' SMALTO SATINATO Urethane alkyd satin water polish for outdoor and indoor Converter name MW 3421 Destination Protective and decorative finish for different types of surfaces (metal, wood, indoor walls)m as well as properly prepared. Suitable for the exposure of atmospheric efftects,

More information

P R O D U C T A D V I C E S H E E T

P R O D U C T A D V I C E S H E E T P R O D U C T A D V I C E S H E E T FULL GLOSS All Farrow & Ball paints are eco friendly with low or minimal VOC (Volatile Organic Compounds) content and are water based giving them a low odour and quick

More information

Painting Pitched Roofs

Painting Pitched Roofs 4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is

More information

HP Epoxy Primer P

HP Epoxy Primer P Product Data Sheet September 2006 (updated November 2016) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Epoxy Primer P580-3005 Product Description P580-3005 HP Epoxy Primer P275-3022 Hardener for Epoxy

More information

HP Chromate Free Epoxy Primer P /-4505/-4510

HP Chromate Free Epoxy Primer P /-4505/-4510 Product Data Sheet September 2011 (February 2013 update) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY HP Chromate Free Epoxy Primers P580-4501/-4505/-4510 Product Description P580-4501 HP Chromate Free

More information

Semimatte Volume Solids 55 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 4 hours 2 hours 1 hour Max. 7 2 hours 48 hours 36 hours

Semimatte Volume Solids 55 ± 2% (ISO ) VOC. Overcoating Data 10ºC 25ºC 35ºC Min. 4 hours 2 hours 1 hour Max. 7 2 hours 48 hours 36 hours W-POXI HIDRO ERP 303 PRODUCT DESCRIPTION: INTENDED USES: Hydrosoluble bicomponent polyamine epoxy primer, with anticorrosive pigmentation and extra quick drying. Items which comply with Directive Rohs

More information

PRODUCT ADVICE SHEET

PRODUCT ADVICE SHEET PRODUCT ADVICE SHEET Dead Flat All Farrow & Ball paints are eco friendly with low or minimal VOC (Volatile Organic Compounds) content and are water based giving them a low odour and quick drying time which

More information

Volume Solids % Weight Solids %

Volume Solids % Weight Solids % Product Name Full Product Name Type of Product Description HS 2K Primer (High Build) 2K high build acrylic urethane primer surfacer Concept HS 2K Primer (High Build) is a high solid 2K acrylic urethane

More information

WEGPOXI WET SURFACE 89 PW ALUMINUM

WEGPOXI WET SURFACE 89 PW ALUMINUM WEGPOXI WET SURFACE 89 PW ALUMINUM PRODUCT DESCRIPTION INTENDED USES Bicomponent epoxy polyamine primer, of high solids, high thickness and with anticorrosive pigmentation with an aluminum base, providing

More information

PercoTop 449 2K Structure Topcoat

PercoTop 449 2K Structure Topcoat Features is a polyurethane based 2K structure topcoat with a high mechanical resistance. It has an excellent resistance to solvents and other chemicals. Different structures can be produced (cf. PercoTop

More information

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION

RAPTOR EPOXY PRIMER RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER DESCRIPTION Suitable as a primer or as a primer filler for industrial refinish applications, the primer also provides excellent anti-rust protection. Easy to apply Excellent anti-corrosion resistance Can be applied

More information

DULUX WOODGARD EXTERIOR TIMBAPRESERVATIVE

DULUX WOODGARD EXTERIOR TIMBAPRESERVATIVE TECHNICAL DATA SHEET Version 1 2015 SEPTEMBER THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Deep penetrating wood treatment for exterior wood. PRODUCT USES A penetrating wood dressing

More information

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description.

Data Sheet K-Aqua Silk Matt Enamel K-Aqua Seidenmattlack K-Aqua Hardener Properties. Material description. 0 Enamel 2388 2K-Aqua Seidenmattlack 2388 Englisch water-based, two-component, highly resistant to mechanical and chemical stress, AgBB certified, for interior and exterior use, with 2K-Aqua Hardener 2380

More information

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description

Full Product Name. Products. Properties. 2K Etch Primer. Type of Product Description Product Name Full Product Name Type of Product Description 2K acid etch primer Concept is an acid containing etch and primer in one product. This Product is characterized by excellent adhesion and corrosion

More information

Low V.O.C. 2-Component Polyurethane Game Line Paint System

Low V.O.C. 2-Component Polyurethane Game Line Paint System PBWWinc. 1 Technical Data Sheet GEN-U-LINE 4000 Series Low V.O.C. 2-Component Polyurethane Game Line Paint System Product Description: GEN-U-LINE 2-component polyurethane line paints are high gloss, flexible,

More information

P R O D U C T A D V I C E S H E E T

P R O D U C T A D V I C E S H E E T P R O D U C T A D V I C E S H E E T E S T A T E E G G S H E L L All Farrow & Ball paints are eco friendly with low or minimal VOC (Volatile Organic Compounds) content and are water based giving them a

More information

P R O D U C T A D V I C E S H E E T

P R O D U C T A D V I C E S H E E T P R O D U C T A D V I C E S H E E T FULL GLOSS All Farrow & Ball paints are eco friendly with low or minimal VOC (Volatile Organic Compounds) content and are water based giving them a low odour and quick

More information

Please also carry out relevant test patches to ensure product compatibility and colour satisfaction.

Please also carry out relevant test patches to ensure product compatibility and colour satisfaction. INGILBY WATER BASED PAINTS GENERAL TIPS AND OBSERVATIONS In order to help projects run smoothly, if, at any stage during application, guidance is required please do not hesitate in contacting us for advice.

More information

10P20-44MNF High Solids Epoxy Primer

10P20-44MNF High Solids Epoxy Primer Technical Data Sheet Product Group High solids epoxy primer Characteristics Product Information A high solids urethane compatible, Skydrol resistant primer for application to aircraft exterior surfaces.

More information

SECTION PAINTING

SECTION PAINTING SECTION 09900 PAINTING PART 1 - GENERAL 1.1 SECTION INCLUDES A. This Section includes surface preparation, painting, and finishing of new and existing wood, interior and exterior surfaces including the

More information

IRON MIOX Micaceous iron polish, anticorrosive for iron surfaces with no patchy finish

IRON MIOX Micaceous iron polish, anticorrosive for iron surfaces with no patchy finish Converter name Destination Finish at high anticorrosie powerd given by the high micaceous iron oxyd. Suitable also in marine and iindustrial environment. Applicable on iron and steel surfaces as well as

More information

RECOMMENDED USES Painting of gypsum boards, gypsum, cement-lime plasters, decorative painting of concrete

RECOMMENDED USES Painting of gypsum boards, gypsum, cement-lime plasters, decorative painting of concrete TIKKURILA DESCRIPTION The newest generation, waterborne, latex, acrylic-composite paint worked out with use of modern encapsulation technology which increase the barrier properties of painted surface.

More information

January 2007 Product Information DELTRON D821

January 2007 Product Information DELTRON D821 GLOBAL REFINISH SYSTEM January 2007 Product Information DELTRON High Solids Chip Resistant Primer PRODUCT DESCRIPTION is a transparent-grey primer surfacer with excellent anti-chip and anti-corrosion properties.

More information

INDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10

INDUSTRIAL PAINTS INDUSTRIAL TOP COAT 6 GENERAL 6 ACRYLIC LACQUERS 8 ALKYD LACQUERS 10 COLORS www.soppec.com EVENT COLORS PRO TECH INDUSTRIAL PAINTS In all industrial or agricultural activities it is important to be able to carry out rapid repairs to damaged paintwork, (notably to machinery

More information

Aerodur 3001 Base Coat Special Effects

Aerodur 3001 Base Coat Special Effects Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information Aerodur 3001 topcoat is part of the high solid 3 components polyurethane Aerodur 3001 Solid Colors Aerodur 3001

More information

UHS Duralit Extra Tinters series 150

UHS Duralit Extra Tinters series 150 2K ACRYLIC FINISH 2:1 UHS Duralit Extra, is a 2K Acrylic Topcoat enamel for direct gloss solid colours. It has been developed for use where product VOC is restricted. UHS Duralit Extra provides maximum

More information

I PAINT WITH D AQUA. Guide to water painting

I PAINT WITH D AQUA. Guide to water painting I PAINT WITH D AQUA Guide to water painting 2 D AQUA SIRCA is the brand of colours and paints completely water base to varnish, renovate and maintain both the interior and exterior of the living spaces.

More information

Product Data Sheet RUST PROOF ANY-WAY SPRAY PAINT. No /14. Aervoe Industries, Inc.

Product Data Sheet RUST PROOF ANY-WAY SPRAY PAINT. No /14. Aervoe Industries, Inc. Product Data Sheet RUST PROOF ANY-WAY SPRAY PAINT VOC/CARB MIR: FLAT

More information

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881.

These Application Instructions cover surface preparation, application equipment and application details for HEMPADUR MASTIC 45880/45881. For product description refer to product data sheet HEMPADUR MASTIC 45880/ HEMPADUR MASTIC 45880/ High temperatures: 45881: BASE 45889 with CURING AGENT 95881 Low to medium temperatures: 45880: BASE 45889

More information

PRODUCT GUIDE: CATALYZED TOPCOATS. Version:

PRODUCT GUIDE: CATALYZED TOPCOATS. Version: PRODUCT GUIDE: CATALYZED TOPCOATS Version: 08.07.17 ELITE COATINGS PRODUCT DATA PRODUCT: Low VOC High Solids Aliphatic Urethane Product Number: 4045 DESCRIPTION: 4045 is a top of the line 2 component urethane

More information

PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS

PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS PRODUCT GUIDE FIRST FOR LASTING IMPRESSIONS ULTRIMAX 1 ULTRIMAX 1 ULTRIMAX 1 THE NUMBER 1 FOR SAVING YOU TIME AND EFFORT ULTRIMAX 1 COMPLIANT PRIMER, GLOSS AND VALUE IN ONE Ultrimax 1 is a high build acrylicbased

More information

ADLER 2K-Fenstergrundlack

ADLER 2K-Fenstergrundlack ADLER 2K-Fenstergrundlack 69511 ff Solvent-based white primer and intermediate coat for industrial and professional use PRODUCT DESCRIPTION General Special Properties and Standards Application area Solvent-based,

More information

SURFACE FINISH MAINTENANCE

SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE SURFACE FINISH MAINTENANCE Lumec strongly recommends that you maintain your luminaires twice a year in order to prolong the appearance of the finished surface. By following this

More information

Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY

Technical Data Sheet Primers/Surfacers LV 250 Primer EP /005 FOR PROFESSIONAL USE ONLY 100 2505-001/005 50 2505-104 40 2505-204 2505-205 12 Description: Autocoat BT LV 250 Primer EP is a quick drying, chromate-free high solid two-pack epoxy primer-surfacer for shot blasted steel substrates..

More information

Primer Surfacer EP II

Primer Surfacer EP II Description Surfacer EP II is a gray, 4.6 lbs/gal, chromate-free epoxy primer that can be applied as a sprayable sanding surfacer, rollable sanding surfacer or primer sealer. This product provides good

More information

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY

Technical Data Sheet Primers/Surfacers LV 350 Primer EP FOR PROFESSIONAL USE ONLY 4 3505-002 1 3505-105 0.5 3505-204 Description: High solid two-pack epoxy primer-surfacer providing excellent appearance and corrosion protection. The target use for this product is refinishing and refurbish

More information

CUPRON NEXT TECHNICAL DATA SHEET

CUPRON NEXT TECHNICAL DATA SHEET Product description New hard matrix antifouling paint free of copper and organostannic compounds. It provides good seasonal protection for boats that work even in particularly hot and aggressive waters.

More information

Product Information DP5000

Product Information DP5000 GLOBAL REFINISH SYSTEM March 2016 Product Information DP5000 (For use with UHS Hardener) PRODUCT DESCRIPTION D8521 Light Grey D8525 Grey D8527 Dark Grey UHS Hardener D8717/18/19 Thinners DP5000 is a range

More information

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator.

Use suitable respiratory protection Akzo Nobel Sign Refinishes recommends the use of a fresh air supply respirator. Description A two-component high solids, low VOC, HAPs free epoxy primer. Grip-Gard Epoxy Sealers White and Gray are fast drying primers with excellent corrosion protection over multiple substrates. The

More information

General description: Two-component high-build, high solids surface tolerant universal epoxy coating. For painting on steel and galvanized steel substrates. Certified for systems category C5I High ISO 12944.

More information

TIKKURILA OPTIVA MATT [5]

TIKKURILA OPTIVA MATT [5] DESCRIPTION The newest generation, waterborne, latex, acrylic-composite paint worked out with use of modern encapsulation technology which increase the barrier properties of painted surface. It is intended

More information

E380 and E381 Epoxy Primer

E380 and E381 Epoxy Primer Description E380 is a high solids 3.5 VOC epoxy primer/sealer, which provides excellent filling over sand blasted metals. E380 dries fast while still maintaining good hold out and a smooth finish. E380

More information

TECHNICAL DATA SHEET IVY COATINGS:

TECHNICAL DATA SHEET IVY COATINGS: direct to metal Interior/Exterior DESCRIPTION Ivy Direct To Metal Paint is a low-voc interior/exterior; waterborne; rust-inhibiting metal paint that does not compromise indoor air quality. Ivy Direct To

More information

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015

Autobase Plus FOR PROFESSIONAL USE ONLY. Description. Basecoat 09/16/2015 Description Autobase Plus solvent borne basecoat provides excellent coverage, metallic control and sprayability when used to duplicate OEM solid, metallic and pearl color effects. Autobase Plus must be

More information

March 2009 Product Information RAPID GREYMATIC 2K Filler

March 2009 Product Information RAPID GREYMATIC 2K Filler GLOBAL REFINISH SYSTEM March 2009 Product Information RAPID GREYMATIC 2K Filler PRODUCT DESCRIPTION 2K RAPID GreyMatic is a range of 2K primer surfacers suitable for a wide range of repair work. Versatile,

More information

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1

Primer Pro FOR PROFESSIONAL USE ONLY. Description. As A Primer Surfacer. Mixing 4 1 1 08/09/206 Description is a high solids urethane surfacer and sealer. Depending on the mixing ratio utilized, can be either used as a high build surfacer or wet-on-wet primer sealer. is available in white,

More information

Paints. Paints. WEBSITE

Paints. Paints. WEBSITE Paints Paints HEAD QUARTERS Sheenlac Paints Ltd, No. 76 B, GKS Estates, Block B, Ambattur Industrial Estate, Chennai - 600 098, Tamil Nadu, India. Phone No: 044 43949900 WEBSITE www.sheenlac.in www.sheenlacnoroo.in

More information

WHAT S ON THE MARKET?

WHAT S ON THE MARKET? Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some

More information

TECHNICAL INFORMATION TRANSOZINC EPOXY PRIMER Primario Epóxico Orgánico de Zinc COMPONENT

TECHNICAL INFORMATION TRANSOZINC EPOXY PRIMER Primario Epóxico Orgánico de Zinc COMPONENT COMPONENT Component A Component B 513-80859-999 DESCRIPTION Zinc organic primer with galvanising USE Transozinc Epoxy Primer can be used as a high performance anticorrosive base coat on steel surfaces,

More information

SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY

SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY SUNBELT transformer WIDTFA3501 PAINTING TRANSFORMERS WITH WATERBORNE PAINT SYSTEMS INTERNAL USE ONLY DOCUMENT HISTORY REV. DATE DESCRIPTION OF CHANGE AND REASON FOR CHANGE A JUNE 10, 1999 NEW ISSUE B JULY

More information

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification.

The required quality of surface preparation can vary depending on the area of use, expected durability and if applicable, project specification. Technical Data Sheet 14880 1 14880 acrylic VValidationDate). 1 Product description This is a one component solvent based acrylic thin film intumescent coating. Independently approved for fire protection

More information

nax Pro LV3601/03/05 VHS Primer Surfacer

nax Pro LV3601/03/05 VHS Primer Surfacer Description VOC compliant, quick-drying multi grey shade, two-pack wet on wet and sanding primer surfacer, with excellent application and sanding properties. Helps to reduce process time and provides good

More information

Exterior Paint for wood Tables and Benches

Exterior Paint for wood Tables and Benches Page 1 of 5 DESIGN STANDARDS FOR: EXTERIOR PAINTING Exterior Paint for wood Tables and Benches 1. Wood tables and benches, including trash receptacle slats, shall be painted with one coat of primer and

More information

Bulldog Adhesion Promoter System

Bulldog Adhesion Promoter System PABC124 Abrasive Cleaner GTPO123, QTPO123 Adhesion Promoter (liquid) ETPO123B Adhesion Promoter (aerosol) Bulldog Adhesion Promoter is the premier adhesion promoter for the auto body collision repair market.

More information

GORI 59. Product Description. Composition dsc13X59. Product Code GORI 59 PRIMER FOR 2S FLOOR FINISH. Product Name. Pretreatment of wooden floors

GORI 59. Product Description. Composition dsc13X59. Product Code GORI 59 PRIMER FOR 2S FLOOR FINISH. Product Name. Pretreatment of wooden floors GORI 59 Product Code Product Name Recommended for 10130dsc13X59 PRIMER FOR 2S FLOOR FINISH Pretreatment of wooden floors 1 Product Description 1.1 Product Type: is a water soluble, acrylic primer for preparation

More information

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide)

Big Sky Product Information Sheet. Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) Big Sky Product Information Sheet TECHNICAL SUPPORT ((800) 328-4892 P.I. Sheet #3008 Epoxy Prime Primer/Sealer PS3042 (Lt. Gray) PS3044 (Dk. Gray) PS3045 (Black) PS3047 (Yellow Oxide) READ ENTIRE PRODUCT

More information

colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR)

colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR) colors FOR ALUMINUM WINDOWS & DOORS (INTERIOR & EXTERIOR) When it comes to color choices for our aluminum windows and doors, we have no limitations. We break it down into 4 categories: Popular Colors,

More information

Product Data Sheet August 2006 (Updated in December 2014)

Product Data Sheet August 2006 (Updated in December 2014) Product Data Sheet August 2006 (Updated in December 2014) INTERNATIONAL MASTER FOR PROFESSIONAL USE ONLY Fastbuild TM Product Description P540-400 Fastbuild - green P540-401 - off white P540-402 - grey

More information

TECHNICAL DATA SHEETS

TECHNICAL DATA SHEETS INDUSTRIAL FINISHES TECHNICAL DATA SHEETS ENG DEBAL COATINGS NV INDUSTRIAL WOODCOATINGS TABLE OF CONTENTS 1. PINK BLOCKER 2C Color + Clear STAINS & COLOURS 2. REACTIVE STAIN 3. AQUAPAD 4. AQUACOLOR 5.

More information

Volume Solids %

Volume Solids % Product Name Full Product Name Type of Product Description 2K acrylic urethane solid topcoat Concept is a 2 K Solid tinting system. It incorporates a large range of colour formulations, with high opacity

More information

The Application Guide offers product details and recommended practices for the use of the product.

The Application Guide offers product details and recommended practices for the use of the product. Technical Data Sheet Application Guide Approved 641;649 1,2 641 acrylic ^(ValidationDate) 1 Product description This is a one component physically drying acrylic coating. It has a semi gloss finish with

More information

GORI 53. Product Description. Product Code / / EXPORT ARTICLE CODE: GORI 53 2S FLOOR FINISH. Product Name. Wooden floors and stairs

GORI 53. Product Description. Product Code / / EXPORT ARTICLE CODE: GORI 53 2S FLOOR FINISH. Product Name. Wooden floors and stairs GORI 53 Product Code 359145/359139 / EXPORT ARTICLE CODE: 132553 Product Name Recommended for Available sizes 2S FLOOR FINISH Wooden floors and stairs 4.50 L 1 Product Description 1.1 Product Type: 1.2

More information

Craftmaster Paints Ltd 2018 Catalogue

Craftmaster Paints Ltd 2018 Catalogue Ordering To order any of the products in this catalogue you can either: Call us between 9am and 5pm Monday Friday on 01954 231 308. Or visit our website www.craftmasterpaints.co.uk and order the majority

More information

MATERIAL AND EQUIPMENT STANDARD FOR ALKYD PAINT (ALUMINUM) LEAFING TOP COAT (FINISH) ORIGINAL EDITION AUG. 1993

MATERIAL AND EQUIPMENT STANDARD FOR ALKYD PAINT (ALUMINUM) LEAFING TOP COAT (FINISH) ORIGINAL EDITION AUG. 1993 MATERIAL AND EQUIPMENT STANDARD FOR ALKYD PAINT (ALUMINUM) LEAFING AS TOP COAT (FINISH) ORIGINAL EDITION AUG. 1993 This standard specification is reviewed and updated by the relevant technical committee

More information