Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
|
|
|
- Beverly Miles
- 5 years ago
- Views:
Transcription
1 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Clmping or synchro flnge Connection xil, rdil or tngentil Pulses per revolution up to 5000 High resistnce to shock nd virtions Option 0122, Explosion protection zone 22 ExEIL580 with clmping flnge Technicl dt - electricl rtings Voltge supply 5 VDC ±5 % VDC VDC Reverse polrity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, mx. 1 s nd 1 signl) Consumption w/o lod 70 ma Pulses per revolution Phse shift 90 ± Scn rtio % Reference signl Zero pulse, width 90 ± % Sensing method Opticl Output frequency 00 khz (TTL) 160 khz (HTL) Output signls A+, B+, R+, A-, B-, R- Output stges TTL/RS22 HTL/push-pull Interference immunity DIN EN Emitted interference DIN EN Approvl UL 508 / CSA 22.2 Technicl dt - mechnicl design Size (flnge) mm Admitted shft lod 0 N xil 80 N rdil Protection DIN EN IP 65 Operting speed 100 rpm (+ C) 100 rpm (+0 C) 8000 rpm (+60 C) Strting torque 0.0 Nm (+ C) Mterils Housing: luminium die-cst Flnge: luminium Solid shft: stinless steel Amient temperture C Reltive humidity 90 % non-condensing Resistnce DIN EN Virtion 0 g, -00 Hz DIN EN Shock 00 g, 6 ms Explosion protection II D Ex tc IIIC T C Dc X (dust): see specil conditions X Connection Flnge connector M12, 8-pin Flnge connector M2, 12-pin Cle Weight pprox. 00 g ExEIL580 - clmping flnge Shft type ø x mm, solid shft with flt (clmping flnge) ExEIL580 - synchro flnge Shft type ø6 x mm, solid shft with flt (synchro flnge) Suject to modifiction in technic nd design. Errors nd omissions excepted. 1
2 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Prt numer Clmping flnge ExEIL580-S C. 5..F/ 0122 Option 0122 ATEX Zone 22 Pulse numer - see tle E H N Q Voltge supply / output stges 5 VDC, TTL/RS22, 6 chnnel VDC, TTL/RS22, 6 chnnel VDC, HTL/push-pull, 6 chnnel VDC, HTL/push-pull, 6 chnnel R L F B T U D A P Q Connection Cle rdil, 1 m Cle rdil, 2 m Flnge connector M2, 12-pin, rdil, mle, ccw Flnge connector M12, 8-pin, rdil, mle, ccw Cle xil, 1 m Cle xil, 2 m Flnge connector M2, 12-pin, xil, mle, ccw Flnge connector M12, 8-pin, xil, mle, ccw Cle tngentil, 1 m Cle tngentil, 2 m Protection 5 IP 65 Specifiction solid shft ø x mm, with flt Pulse numer C Flnge Clmping flnge, centering collr ø6 mm, M/M Suject to modifiction in technic nd design. Errors nd omissions excepted. 2
3 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Prt numer Synchro flnge ExEIL580-S Y F/ 0122 Option 0122 ATEX Zone 22 Pulse numer - see tle E H N Q Voltge supply / output stges 5 VDC, TTL/RS22, 6 chnnel VDC, TTL/RS22, 6 chnnel VDC, HTL/push-pull, 6 chnnel VDC, HTL/push-pull, 6 chnnel R L F B T U D A P Q Connection Cle rdil, 1 m Cle rdil, 2 m Flnge connector M2, 12-pin, rdil, mle, ccw Flnge connector M12, 8-pin, rdil, mle, ccw Cle xil, 1 m Cle xil, 2 m Flnge connector M2, 12-pin, xil, mle, ccw Flnge connector M12, 8-pin, xil, mle, ccw Cle tngentil, 1 m Cle tngentil, 2 m Protection 5 IP 65 Specifiction solid shft 06 ø6 x mm, with flt Pulse numer Y Flnge Synchro flnge, flute ø5 mm, M/M Suject to modifiction in technic nd design. Errors nd omissions excepted.
4 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Accessories Connectors nd cles 1278 Connection cle 2 m shielded with femle connector M12, 8-pin, stright (ESG FH00G) 1292 Connection cle 5 m shielded with femle connector M12, 8-pin, stright (ESG FH0500G) 129 Connection cle m shielded with femle connector M12, 8-pin, stright (ESG FH00G) 961 Connection cle 2 m shielded with femle connector M12, 8-pin, ngled (ESW FH00G) 962 Connection cle 5 m shielded with femle connector M12, 8-pin, ngled (ESW FH0500G) Connection cle m shielded with femle connector M12, 8-pin, ngled (ESW FH00G) Connector M2, 12-pin Connection cle 1 m shielded with femle connector M2, 12-pin Connection cle 2 m shielded with femle connector M2, 12-pin 1100 Connection cle 5 m shielded with femle connector M2, 12-pin 1101 Connection cle m shielded with femle connector M2, 12-pin Mounting ccessories for ExEIL580 - clmping flnge 1659 Coupling CPS25 L=19 d1=0/d2= Coupling CPS25 L=19 d1=07/d2= 1659 Coupling CPS25 L=19 d1=08/d2= Coupling CPS25 L=19 d1=09/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=/d2= Spring wsher coupling D1=6 / D2= (Z 121. C01) 111 Spring wsher coupling D1= / D2= (Z 121.C0) 118 Spring wsher coupling D1= / D2=16 (Z 121.C0) 110 Spring wsher coupling D1= / D2=1 (Z 121.C06) 111 Spring wsher coupling D1= / D2=12 (Z 121.C07) 0507 Bellows coupling luminium/stinless steel D1=06 / D2= Doule loops coupling D1= / D2= Accessories Mounting ccessories for ExEIL580 - clmping flnge Mounting dptor for encoders with clmping flnge (M) (Z 117) Set of eccentric fixings type A Tether rm Mounting ccessories for ExEIL580 - synchro flnge Coupling CPS25 L=19 d1=06/d2= Coupling CPS25 L=19 d1=06/d2= Coupling CPS25 L=19 d1=/d2= Coupling CPS25 L=19 d1=11/d2= Coupling CPS25 L=19 d1=12/d2= Spring wsher coupling D1=6 / D2=6 (Z 121. C02) 1112 Spring wsher coupling D1=6 / D2= (Z 121. C01) 119 Spring wsher coupling D1=6 / D2=16 (Z 121. C05) 0507 Bellows coupling luminium/stinless steel D1=06 / D2= Mounting dptor for encoders with synchro flnge (Z 1) Set of eccentric fixings for mounting clmp (117667): x eccentric fixings, screws nd nuts Set of eccentric fixings type A 812 Bering flnge for encoders with synchro flnge (Z ) Mtching mesuring wheels ville s ccessories, see under mesuring wheels (MR). Suject to modifiction in technic nd design. Errors nd omissions excepted.
5 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Output signls Trigger level Outputs TTL/RS22 Output level High 2.5 V Output level Low 0.5 V Lod ma Terminl ssignment Flnge connector M2, 12-pin / cle Pin Core color Assignment 1 pink B- 2 lue R+ red R- 5 green A+ 6 yellow A- 7 8 grey B+ 9 white GND rown UB Screen: Connected to housing Cle dt: PVC, [x2x0.1 mm 2 ], ending rdius >2.5 mm, outer dimeter 6.5 mm Outputs Output level High Output level Low Lod HTL/Push-pull UB - V 1.5 V ma Flnge connector M12, 8-pin Pin Assignment 1 GND 2 UB A+ A- 5 B+ 6 B- 7 R+ 8 R Suject to modifiction in technic nd design. Errors nd omissions excepted. 5
6 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Suject to modifiction in technic nd design. Errors nd omissions excepted. 6
7 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Dimensions Clmping flnge, flnge connector M12, rdil 8 ø ø6h8 ø ø8± M12x1 Clmping flnge, flnge connector M2, rdil 8 ø ø6h8 ø ø8± M2x1 Clmping flnge, cle rdil ø8±0.2 ~ ø6h8 ø525 ø Suject to modifiction in technic nd design. Errors nd omissions excepted. 7
8 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Dimensions Clmping flnge, flnge connector M12, xil ø525 ø ø8±0.2 M12x1 ø6h Clmping flnge, flnge connector M2, xil ø525 ø ø8±0.2 M2x1 ø6h8 8.5 Clmping flnge, cle xil ø8±0.2 ~2 8 ø6h ø525 ø Suject to modifiction in technic nd design. Errors nd omissions excepted. 8
9 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Dimensions Clmping flnge, cle tngentil 8.5 ø ø8±0.2 5 ø6h8 128 ø Synchro flnge, flnge connector M12, rdil 51. ø2±0.2 M12x Synchro flnge, flnge connector M2, rdil ø2± M2x1 Suject to modifiction in technic nd design. Errors nd omissions excepted. 9
10 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Dimensions Synchro flnge, cle rdil ~5 ø2± Synchro flnge, flnge connector M12, xil 21.9 ø2±0.2 M12x Synchro flnge, flnge connector M2, xil ø2±0.2 M2x Suject to modifiction in technic nd design. Errors nd omissions excepted.
11 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Dimensions Synchro flnge, cle xil ~2 ø2±0.2 Synchro flnge, cle tngentil.5 ø2± Suject to modifiction in technic nd design. Errors nd omissions excepted ø
12 Incrementl encoders Solid shft with clmping or synchro flnge pulses per revolution ExEIL580 - solid shft Explosion protection II D Ex tc IIIC T C Dc X (dust) Generl- nd Specil conditions X : Only put the device into opertion if... ll necessry precutions hve een tken y the opertor to mke sure device nd connector re fully protected ginst mechnicl impcts or shocks in complince with EN ,section (Specil conditions X ). the connection is mechniclly or electriclly secured to prevent ny interrupt while the contct is live (Specil conditions X ). it hs een ensured the electricl connection of product vrints with cle outlet or cle couplings is outside zone 22 (Specil conditions X ). it hs een ensured the mximum operting speed in reltion to the mient temperture is within the specifictions on the tle Mximum rottion speed elow (Specil conditions X ). the specifictions on the product lel mtch the on-site conditions for use in hzrdous res (EX) (device group, ctegory, zone, temperture clss resp. mximum surfce temperture). the specifictions on the product lel comply with the previling grid conditions. the device shows no visile trce of dmge (resulting from trnsport or storge), nd it hs een ensured no explosive tmosphere, oils, cids, gses, vpors, rdition etc. re present during instlltion. Oserve stndrd EN for instlltion nd commissioning. Device opertion must oserve the instlltion nd operting instructions. The intended use nd ppliction of the device comes under the relevnt legisltion s well s pplicle directives nd stndrds. Mximum rottion speed mient temperture rottion speed solid shft C 100 rpm 0 C 100 rpm 60 C 8000 rpm through hollow shft C 6000 rpm 0 C 500 rpm 60 C 2500 rpm lind hollow shft C 8000 rpm 0 C 8000 rpm 60 C 5000 rpm Suject to modifiction in technic nd design. Errors nd omissions excepted. 12
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution programmable (interpolated system)
Incrementl encoders Solid shft with clmping or synchro flnge 1 6556 pulses per revolution progrmmle (interpolted system) EIL580P - solid shft - OptoPulse Fetures Size mm Precise opticl sensing (interpolted)
Incremental encoders Solid shaft with square flange pulses per revolution
Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil Pulses per revolution up to 5000 High protection up to IP 67 High resistnce
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,
Incremental encoders With blind or through hollow shaft pulses per revolution programmable
Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable
Safety Relay Unit. Main contacts Auxiliary contact Number of input channels Rated voltage Model Category. possible 24 VAC/VDC G9SA-501.
Sfety Rely Unit The Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s Two-hnd ler. Simple
Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution
Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm
Incremental Encoder Model: FOI58
Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85
Incremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
Connection Technology
Opticl fibre signl trnsmission RS422/HTL Opticl fibre trnsmitter nd receiver plus Cost Kostenvorteil dvntge compred gegenüber to conventionl herkömmlicher wiring Verkbelung over b 150 m length* Länge *
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT
Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available
Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT
Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional
Incremental Encoder for special applications
Model Number Features Up to 50,000 ppr Extended temperature range Industrial standard housing Ø58 mm Servo or clamping flange 10 V... 30 V with short-circuit proof push-pull output Description High performance
Reversible and Proportional Electric Actuators
Reversible nd Proportionl Electric s The MP s re used for two-position, floting, nd proportionl control of dmpers, vlves, nd progrm switches in heting, ventiltion, nd ir conditioning pplictions or similr
Absolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT
Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,
IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
POSIROT. PMIS4, PMIR5 Magnetic incremental encoder. Magnetic wheels for rotative applications PMIS4, PMIR5
Variant e: PMIS4, PMIR 5 POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area Highest
Absolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT
Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet SF24A-MF Prmeterisle spring-return ctutor with emergency control function for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 20 Nm Nominl
Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85
![Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85](/thumbs/80/82459193.jpg "Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85")
Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit
Pilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
Cable transducer Analog output / redundant Measuring length absolute up to 5 m
Features Magnetic sensing method Resolution: 12 bit Interface analog 0...10 V / 0.. V /...20 ma Measuring length up to m Removable stickers for water outlet Teach inputs Extremely light thanks to housing
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Discontinued AN6262N, AN6263N. (planed maintenance type, maintenance type, planed discontinued typed, discontinued type)
ICs for Cssette, Cssette Deck ANN, ANN Puse Detection s of Rdio Cssette, Cssette Deck Overview The ANN nd the ANN re the puse detection integrted circuits which select the progrm on the cssette tpe. In
Standard Industrial Types RI 58-O / RI 58-T
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet SR24A-MF Prmeterisle rotry ctutor for ll vlves Nominl torque 20 Nm Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10 V Vrile echnicl dt Electricl
388 SQUARE BASE TIME DELAY RELAYS
3 SQURE SE TIME DELY RELYS "ON" OR "OFF" DELY FUNCTIONS EXTERNL RESISTNCE DJUSTLE ± 3 % REPETILITY DPDT, 2 MP File No. E52 IEC STNDRDS -- ND -5- LOW VOLTGE DIRECTIVE IEC = INTERNTIONL ELECTROTECHNICL COMMISSION
TECHNICAL DATASHEET Incremental Encoder RI 30
Miniature encoder for industrial use Low current consumption High noise interference immunity Cable lengths of up to 00 m Suitable for high pulse frequencies High protection class Applications: CNC machines,
Express Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet RF24-MF-O Communictive rotry ctutor with emergency control function for ll vlves Nominl torque 2.5 Nm Nominl voltge AC/DC 24 V Control Modulting DC ()2...1 V Position feedck DC 2...1 V
Acceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
Radiant systems 0801EN March 2016 Radiant plasterboard ceiling and/or floor system ISO /7
RADIANT CEILING SYSTEM Description is rdint ceiling/wll system relized with 600x1200 mm EPS200 preformed pnels coted with 0,3 mm luminium thermo-conductor sheets, where the plstic pipe with n externl Ø
Extended InGaAs Photodiodes IG26-Series
Description The IG26series is pnchromtic PIN photodiode with nominl wvelength cutoff t 2.6 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt
Encoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet NMC24A-MF Prmeterisle dmper ctutor for djusting dmpers in technicl uilding instlltions Air dmper size up to pprox. 2 m² Nominl torque Nm Nominl voltge AC/DC 24 V Control Modulting DC ()2...
JUMO Wtrans B Programmable Head Transmitter with Radio Transmission
Dt Sheet 707060 Seite 1/10 JUMO Wtrns B Progrmmble Hed Trnsmitter with Rdio Trnsmission Brief description The Wtrns B hed trnsmitter with wireless dt trnsmission is used in connection with Wtrns receiver
Series AE W PFC INDUSTRIAL POWER SUPPLY
FEATURES Progrmmle output voltge (0%~05%) Progrmmle output current (0%~05%) Universl AC input / Full rnge Constnt current limiting Optionl glol control vi RS3 Selectle +5V / 0.5A or +9V / 0.3A uxiliry
DRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
Parallel Actuator Cut-off Control PAS 3 a
K G Pneumtik GmbH In der Kruse 48 549 Eschweiler Deutschlnd / Germny. 49 (0) 4 03 / 99 50 0 ; 49 (0) 4 03 / 655 30 _ Info@kgpneumtik.de # www.kgpneumtik.de Smoke nd Het Exhust Pneumtic Electronic Control
Regular InGaAs Photodiodes IG17-Series
Description The IG7series is pnchromtic PIN photodiode with nominl wvelength cutoff t.7 µm. This series hs been designed for demnding spectroscopic nd rdiometric pplictions. It offers excellent shunt resistnce
Online data sheet. DBS60E-TECJD1024 DBS60 Core INCREMENTAL ENCODERS
Online data sheet DS60ETECJD1024 DS60 Core C D E F H I J K L M N O P Q R S T Ordering information Type Part no. DS60ETECJD1024 DS60ETECJD1024 Other models and accessories www.sick.com/ds60_core Illustration
FTU263. Ripple Control Receiver. Technical Data. Load Management Ripple Control
Lod Mngement Ripple Control Ripple Control Receiver FTU263 Technicl Dt The FTU263 comines the functionlity of ripple control receiver nd full clendr time switch. The FTU263 receiver is suited for opertion
Standard Industrial types RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS
MECHNICL RF STT FOR GREENSTR HE, SiII & i JUNIOR MODELS INSTRUCTION MNUL FITTING & OPERTING INSTRUCTIONS CONTCT INFORMTION MNUL INFORMTION WORCESTER OSCH: TECHNICL: 08705 4 SERVICE: 08547 50 SPRES: 0905
V DC 4 POLE RELAY RC V DC 4 POLE RELAY (RC) V AC 4 POLE RELAY
DT SHEET Plug-in power relays Order code Manufacturer code Description -.. V DC POLE RELY RC -.. V DC POLE RELY (RC) -.. V C POLE RELY Plug-in power relays The enclosed information is believed to be correct,
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
SQN3... SQN4... Actuators. Building Technologies Division Infrastructure & Cities Sector
7 808 ctutors SQN3... SQN4... Electromotoric ctutors for use with ir dmpers nd control vlves of oil or gs urners of smll to medium cpcity. The SQN3... / SQN4... nd this Dt Sheet re intended for use y OEs
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL
Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096
300 ma max. 2 mm ,8 mm. ±1 mm. ±1 Digit. A, A, B, B / signal Z, Z (optional) / status signal ERR (optional) Zinc die casting IP67
Variant e: PMIS4, PMIR 7, PM IR7N POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area
Carbon Composition Resistors
Dimensions Cron Composition Resistors Rtings nd Dimensions Type L Specifiction Limit nd Performnce d D Derting Curve 8 6 4 (/, w) Test procedures, sequence of test, etc., refer to MIL-STD D nd JIS-C-5.
Incremental Shaft Encoders Industrial types
Synchro flange! Universal industry standard encoder! Up to 40,000 steps with 10,000 pulses! High signal accuracy! Protection class up to IP 67! Operating temperature up to 100 C (RI 58-T)! Flexible due
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet LRF24- Communictive rotry ctutor with emergency control function for ll vlves Nominl torque 4 Nm Nominl voltge AC/DC 24 V Control Modulting DC (0)2...10 V Vrile Position feedck DC 2...10
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data
DG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Pilot Operated Proportional DC Valve Series D*1FB. Pilot Operated Proportional DC Valve Series D*1FB. D*1FBR and D*1FBZ
Ctlogue HY11-35/UK Chrcteristics Series D*1F Ctlogue HY11-35/UK Regenertive nd Hyrid Function Series D*1F he pilot operted proportionl directionl vlves D*1F re ville in 4 sizes: D31F - NG1 (CEO 5) D41F
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
NP10 DIGITAL MULTIMETER Functions and features of the multimeter:
NP10 DIGITL MULTIMETER. unctions nd fetures of the multimeter: 1000 V CT III tri requencies from 10.00...10 M. Diode mesurement nd continuity testing. HOLD mesurement. Reltive mesurement. Duty cycle (%)
PRELIMINARY RE36 SERIES MAGNETIC ENCODER
RE6 SERIES MGNETIC EODER The RE6 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing machines. magnet is mounted
Incremental hollow shaft encoder BRIH EcoMag
Incremental hollow shaft encoder BRIH EcoMag features miniaturized hollow shaft encoder with wide pulse range radial cable connection or connector end shaft mounting up to mm general data voltage supply
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI
Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet EVC24A-MF Prmeterisle gloe vlve ctutor for 2-wy nd 3-wy gloe vlves Actuting force 2500 N Nominl voltge AC/DC 24 V Control modulting DC (0)2...10 V Vrile Nominl stroke 40 mm Actuting time
Pilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
Products no longer available
echnicl dt sheet otry ctutor F2-P(-O) ultifunctionl rotry ctutor with emergency control for 2 nd 3 wy control bll vlve orque Nm Nominl voltge C/DC 2 V Control: odulting DC... V or vrible Position feedbck
NOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
Technical data. Functional safety related parameters MTTF d Mission Time (T M ) max. 140 ma Power consumption P 0. Voltage drop
Release date: 2014-04-14 15: Date of issue: 2016-05-0 t102_eng.xml Model Number Features Industrial standard housing Ø58 mm 1 Bit singleturn Output code: gray and binary Short-circuit proof push-pull output
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
Pilot Operated Servo Proportional DC Valve Series D*1FP
Ctlogue HY11-5/UK Chrcteristics he series of pilot operted servo proportionl vlves D*1F trnsfers the dvntges of the rker ptented Voice Coil Drive (VCD ) to lrger frme sizes nd thus high flow rtes. he high
Device installation. AFR 1xx - Feature Description of the Smart Load. AFR1xx 145 % 200 %
KM systems, s.r.o. Dr. M. Horákové 559, 460 06 Lierec 7, Czech Repulic tel. +420 485 130 314, fx +420 482 736 896 emil : km@km.cz, url : www.km.cz sturtion of the mgnetic circuit of the VT. This often
Incremental Shaft Encoders Industrial types
Synchro flange Universal industry standard encoder Up to 40 000 steps with 10 000 pulses High signal accuracy Protection class up to IP67 Operating temperature up to 100 C (RI 58-T) Flexible due to many
Magnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
Rectangular type APS-10 to 15 Series
Rectngulr type APS- to 15 Series From n ultr-thin design to n operting distnce of 15 mm, wide-rnging rectngulr types re vilble to meet diversified requirements. Types output type/dc 3-wire type Shpe Operting
Multiturn absolute encoder
0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description
ITT Cannon Combination D-Sub Connectors
PPLICTIONS Video Coaxial Transmission (75Ω) RF and Telecom Transmission (50Ω) Power Interconnects (Up to 40) ITT Cannon Combination D-Sub Connectors RECTNGULR CONNECTOR SUITED FOR NETWORK ND COMMUNICTION
Technical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
Standard Industrial types RI 36-H
Miniature industry encoder for high number of pulses Short mounting length Easy mounting procedure Applications: motors, machine tools, robots, automated SMD equipment NUMBER OF PULSES 5 / 0 / 0 / 5 /
ABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:
ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog
ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:
ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog
Multiturn absolute encoder
SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed
Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
G9SA. Safety Relay Unit. The G9SA Series Offers a Complete Line-up of Compact Units. Model Number Structure
Sfety Rely Unit G9 CSM_G9_DS_E The G9 Series Offers Complete Line-up of Compct Units. Four kinds of -mm wide Units re ville: A -pole model, -pole model, nd models with poles nd OFF-dely poles, s well s
Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0
Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder
Rotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
PRELIMINARY 9-SPOT SPECIFICATION. RoHS COMPLIANT RGB COLOR CHANGING IP67 IK07
SPECIFICTION Line voltage LED, High Performance Facade and Flood Lighting Ideal for lighting facades, structures, bridges Industry leading center beam candlepower with optics Integral power (line voltage
Phone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
Material: Weight: Shaft Loads:
Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating
On/off valves with spool position monitoring
On/off vlves with spool position monitoring RE 2483/2. Replces: 3.8 /3 Tble of contents Contents Pge Generl 2 Directionl set vlve type SED 3 Directionl set vlve type SEW 4 Directionl set vlve type SH,
Electrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnicl dt sheet SM24P-MF Prmeterisle RoustLine dmper ctutor for djusting dmpers in industril plnts nd in technicl uilding instlltions Air dmper size up to pprox. 4 m² Nominl torque 2 Nm Nominl voltge
Online data sheet DFS60A-TEPZ00S09 DFS60 INCREMENTAL ENCODERS
Online data sheet DFS60A-TEPZ00S09 DFS60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Features Special device Specialty Ordering information Other models and accessories
Rotary Measurement Technology Absolute Encoders, Multiturn
Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Rotary Measuring Technology
Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation: